In `MediaUploader` the lint warning can be ignored, as the stream is
closed elsewhere.
In the other files `.use` is used to simplify the code and remove
the need for Closeable.closeQuietly (as `.use` catches exceptions that
are thrown when closing).
Use `assert` to note when a nullable value is known to be non-null.
Extract a method call to a variable where necessary to do this.
Update `CharSequence.unicodeWrap()` to handle a null `CharSequence`.
`ConversationViewHolder` calls `getDisplayName()`, which may return
null.
Replace with `getName()`, which is consistent with usage in other
classes. Mark `getDisplayName()` as deprecated to prevent future
usage.
The previous code used SwitchPreference to generate the switches, which
didn't apply the Material colours. This made it difficult to distinguish
between the on/off states, as the non-Material colours for those states
are very similar.
Fix by using SwitchPreferenceCompat which uses the correct Material
colours.
The previous code used "?attr/colorOnTertiary", which is the wrong
colour for the default background. Remove the override, so the correct
styled colour is used.
The previous code only attempted to restore the user's reading position
once, after any initial refresh.
Adjust this so the position is restored after any refresh (which may
have been triggered from a menu instead of a swipe), and use
`scrollToPositionWithOffset` to ensure it's visible.
Testing showed additional activities with toolbar flicking issues. Fix
as before, using `setLiftOnScrollTargetView` to specify the scrolling
view the toolbar should lift above.
The chips for adding a new hashtag to a tab specified the background
colour without setting the text colour, resulting in the colour being
too low-contrast against the background.
Use `?colorOnPrimary` to get the correct colour.
Switching to the Material 3 themes caused the previous list dividers to
disappear.
Replace `DividerItemDecoration` with `MaterialDividerItemDecoration` to
restore them.
The previous code would always fetch the latest statuses when the app
restarts, jumping the user to the top of the home timeline. This is
because state.anchorPosition was null in this case.
Fix this by passing the saved initialKey to CachedTimelineRemoteMediator
and using it to construct a page of statuses around the requested
status.
This restores the user's reading position, and ensures that if the
user is at the top of the list their reading position is not reset
to the second item in the list.
Fixes#41, #42
The previous code did not handle refreshing correctly; it retained some
of the cache, and tried merge new statuses in to the cache. This does
not work, and resulted in the app creating gaps in the timeline if more
than a page's worth of statuses had appeared since the user last
refreshed (e.g., overnight).
Fix this by treating the on-device cache as disposable, as the Paging3
library intends. On refresh the cached timeline is emptied and replaced
with a fresh page.
This causes a problem for state that is not stored on the server but is
part of a status' viewdata (has the user toggled viewing a piece of
media, expanded a CW, etc).
The previous code tried to work around that by pulling the state out of
the page cache and copying it in to the new statuses. That won't work
when the page cache is being destroyed.
So do it properly -- store the viewdata state in a separate (sparse)
table that contains only rows for statuses that have a non-default
state.
Save changes to the state when the user interacts with a status, and
use the state to ensure that the viewdata for a status in a thread
matches the viewdata for the same status if it is shown on the home
timeline (and vice-versa).
Fixes#16
The previous code didn't collect the uiState, so it was fixed at the
default value, ignoring any changes that happened over the life of
the viewmodel.
Fix that, so that the FAB will hide/show on scroll according to the
user's preferences.
While I'm here simplify the show/hide logic. The previous code would
ignore the user's preference if scrolling up. There doesn't seem to
be a good reason for that, and spelunking 6+ years back through the
history didn't find a justification for that behaviour in the original
commit.
Fixes#15
Scrolling a thread, set of search results, or viewing a thread would
cause the toolbar to flicker as items moved under it.
Fix this by configuring the toolbar to `liftOnScroll` in the relevant
layouts.
It needs to be configured with the view (or ID of the view) that it
will be scrolling. For views that are in the same layout this is done
with the `liftOnScrollTargetViewId` attribute.
For views that are in different layouts (e.g. the toolbar is in
the activity and the scrolling view is in a fragment) the app bar's
`setLiftOnScrollTargetView` method must be called.
Do this in `TimelineFragment` if the hosting activity is a new
interface `AppBarLayoutHost`. Implement this interface in
`StatusListActivity`.
Update the relevant layouts to use `MaterialToolbar`.
Fixes#21
First crash appeared to be caused by a failure to find the
`attr/colorBackgroundAccent` colour from the theme.
It wasn't clear why the attribute could not be found, so to fix it was
simpler to remove the color and attribute entirely, and replace it with
something more appropriate from the Material 3 tokens.
- Preview cards are stroked with `colorOutline`
- Poll options use `colorPrimary` (user's vote) or `colorSecondary`
(other choices) with appropriate text colours.
- Links in link preview cards use `android:attr/textColorLink`
- The placeholder icon in preview cards uses `?android/textColorLink`
- Remove it from `help_message_background`, and stroke with
`?colorOutline`
Doing this I discovered several places where a colour was being
specified unnecessarily, those have been removed.
To make it easier to understand the theme hierarchy that has been
collapsed and renamed to follow Android conventions.
- AppTheme -> Base.Theme.Pachli
- BaseTheme -> Theme.Pachli
- DefaultTheme has been removed as unnecessary
This unearthed a second crash, where `attr/actionBarSizeWithSubtitle`
was not found.
To fix that create an explicit style for toolbars that need it, and
apply the style (`Pachli.Widget.Toolbar`).
This also surfaced a third problem, where the `fragment_timeline*`
layouts had not been updated in `layout-sw640dp`, so those have been
updated to reflect the same views/IDs as the default `fragment_timeline`
layout.
These changes caused a small chain of "unused resource" lint errors,
which have been fixed by removing the unused colours.
The Android Material libraries were also being implicitly depended on
through other library imports instead of being explicit. So include
them as an explicit dependency.
Fixes#18
The previous code was operating on the wrong text, resulting in normal
URL spans (which have an underline) being applied, instead of the
correct spans (which don't).
Fix this by using the correct length.
Previous code created hashtag filters without the `#`, so muting the
tag `#something` would filter all posts that contained `something`,
with or without the `#`.
Fix this when creating filters, and only remove filters (when unmuting)
if the title and contents match.
Show a snackbar when hashtags are successfully muted/unmuted, so the
user is aware something happened.
While drafting the policy I noticed that the `READ_MEDIA_*` permissions
could be added (for newer devices), the `ACCESS_NETWORK_STATE`
permission was missing, and `VIBRATE` was unnecessary.
- Rename packages to app.pachli.*
- Switch to Pachli icons (blue / orange)
- Reset database schema version to 1
- Reset versionCode to 1 and versionName to "1.0"
- Update colour scheme, use colorPrimary etc through the app
- Use Material UI components for toolbars
- Use "Pachli" in strings (UI, constants, etc)
- Update copyright on code I contributed
- Update README
- Update fastlane metadata
Requiring trailing commas on multi-line lists of items (declarations
and call sites) reduces future repository churn when those lines are
changed, but introduces additional churn now.
Bite the bullet and make the change, as well as adjusting lines that
were too long / indented incorrectly.
The changes were performed automatically, using the `ktlintFormat` task.
Based on https://github.com/tuskyapp/Tusky/pull/3968 by
https://github.com/tinsukE
Filters that the user had set for the notifications timeline were not
being applied.
Fix this in NotificationsViewModel; fetch the user's filters and apply
them against the status in a notification. If the status should be
hidden it is removed, and if it should show a warning it does so.
The user can click through the warning to show the status.
Prior to this change the user had to repeatedly tap "Load more" when
scrolling. This is tedious for the user.
In addition, the previous code had bugs that meant that not all statuses
were being loaded. Users could leave the app for a while (overnight,
say), and when returning would discover far fewer statuses than had
actually been posted.
Fix this, following the architecture first introduced for notifications
(Fragment -> ViewModel -> Repository -> Source/Mediator).
- Load statuses for cached and non-cached timelines using Paging3
- Show Failures during a load, and the user can retry
- Delete the "Reading order" preference, it is no longer necessary
Android's choices for font customisation can be limited, depending on
the vendor. Allow users to choose from a small collection of embedded
fonts, chosen by asking users for recommendations.
The font choice is implemented as a preference. Provide a custom dialog
that shows the fonts (in that font) so the user can see what they're
choosing between.
Ensure the font's license information is displayed in the "About"
section.
The previous code did not credit all third party code used in the app,
or provide access to the licenses.
Fix this by adopting the "aboutlibraries" library, which processes
dependencies at build time and generates a list of dependencies,
versions, and license information to display to the user.
Use this to also ensure that the non-source dependencies (artwork,
emoji) are given appropriate credit.
- Remove the existing restriction on the number of tabs
- Allow the tabs to scroll to display more
- Update UI and text resources to remove obsolete content
- Implement the trending posts API
- Display trending statuses as a new Timeline kind
- Allow the user to add trending statuses to a dedicated tab
- Always show the "Trending" option in the navigation menu
- Implement the trending links API
- Provide a Fragment/ViewModel/Repository and Adapter/ViewHolder set
to display the content
- Show all trends (as a pageable fragment list) in TrendingActivity
- Allow the user to add trending links to a dedicated tab
- Always show the "Trending" option in the navigation menu
### Objective
* Prevent data loss when the user inadvertently hits back or wants to
leave the profile edition with unsaved changes.
### Description
* To limit the number of changes to the existing codebase, I merely
re-used the same method used by `save()` in the ViewModel to decide
whether to make a network request or simply return the profile as-is.
* ~A bit of code juggling around in the ViewModel and I was able to use
the logic for all the encoding of each profile field (Which is what the
ViewModel caches in memory).~ Thanks @Lakoja for improving this in the
VM.
* A couple of internal data classes used as helpers to move all the
fields around (now that they are no longer used in one single place)
were introduced.
### Potential Optimizations
* ~The profile encoding is done twice (once for checking, and then again
if the user has to actually save it). I'd say this is a negligible price
to pay, since the alternative would be to create a different set of
comparisons and/or keeping another profile in memory for the purpose of
comparison.~
### Visual Improvement
* I believe the Dialog is difficult to see, but it's being displayed
with Tusky's theme. Perhaps there's a better style to apply in this
case? (or maybe the edit profile activity shouldn't have the same
background color as dialogs?!)
### Issue
* #3486
Set the "System Design" as the default theme.
This ensures that the app's initial behaviour respect's the user's system-wide theme choice, while still allowing the user to adjust it later.
This is only done for new installs of Tusky. If the user is upgrading from a previous release and they did not have an explicit theme set then the dark theme is used, and the UX does not change.
dc9e9f2aeb
modifed the code that fetched the value of EXTRA_NOTIFICATION_TYPE in an
intent, to use getSerializable().
However, the value was being placed in to the intent using putString().
This caused an exception when trying to update the summary notification,
so it would never update.
```
java.lang.ClassCastException: java.lang.String cannot be cast to com.keylesspalace.tusky.entity.Notification$Type
at com.keylesspalace.tusky.components.notifications.NotificationHelper.updateSummaryNotifications(NotificationHelper.java:321)
at com.keylesspalace.tusky.components.notifications.NotificationFetcher.fetchAndShow(NotificationFetcher.kt:87)
at com.keylesspalace.tusky.components.notifications.NotificationFetcher$fetchAndShow$1.invokeSuspend(Unknown Source:14)
```
Fix this by placing the value in to the intent using putSerializable(),
to match how it will be fetched.
Previously the notification filter and clear actions were shown as
buttons in the UI, with a preference that determined whether they were
displayed.
Remove this preference, and display them as menu items.
- "Filter notifications" is shown as an icon, if possible
- "Clear notifications" is only ever shown as a menu item, to reduce the
chance the user inadvertently selects it
To ensure that the options menu appears correctly, remove the code that
creates a "fake" action bar, and adjust the layouts so that there are
three toolbars;
- mainToolbar -- displays the icons, and the current "location" (Home,
Notifications, etc)
- topNav -- displays the row of tabs at the top
- bottomNav -- displays the row of tabs at the bottom
Only one of them is set as the support action bar (depending on the
user's preferences). This provides the "show a logo" and "show the
options menu" functionality as standard, without needing to re-implement
as the previous code did.
The "trending" functionality will expand to include trending links and
posts. But at the moment the "Trending" references in the code are
exclusively to hashtags.
Rename "Trending" to "TrendingTags" or similar everywhere necessary in
order to prepare for this.
This includes a database migration, as the identifier for the "Trending
tags" tab in the account preferences was changed from "Trending" to
"TrendingTags". The migration updates the stored value if necessary.
Before, intent creation was scattered across multiple sites, with account switching logic in both `ComposeActivity` and `MainActivity`.
Now, intents are only created in `MainActivity` Companion, and account switching only occurs in `MainActivity`
Fixes#3695
Prevent users from accidentally deleting filters by prompting them to confirm.
Add an AlertDialog extension that converts AlertDialog callbacks to linear control flow.
Fixes#3736.
Currently translated at 100.0% (617 of 617 strings)
Translated using Weblate (Vietnamese)
Currently translated at 100.0% (617 of 617 strings)
Co-authored-by: Hồ Nhất Duy <mastoduy@gmail.com>
Translate-URL: https://weblate.tusky.app/projects/tusky/tusky/vi/
Translation: Tusky/Tusky
Previously, the thread indicator would start at the top of the avatar
for the status at the start of the thread, and end at the top of the
avatar for the status at the end of the thread.
If these avatars were partially transparent the thread indicator could
either (a) poke out of the top of the avatar at the start of the thread,
(b) not properly connect with the avatar at the end of the thread, or
(c) both.
Partially fix this by making the divider start/stop in the middle of the
avatar. This assumes that this area will typically have opaque content,
even if some of the rest of the avatar is transparent. This is not
always true, but it's still better than the current behaviour.
Avatars that are semi-transparent are a problem when viewing a thread,
as the line that connects different statuses in the same thread is drawn
underneath the avatar and is visible.
Fix this with a CompositeWithOpaqueBackground Glide transformation that:
1. Extracts the alpha channel from the avatar image
2. Converts the alpha to a 1bpp mask
3. Draws that mask on a new bitmap, with the appropriate background
colour
4. Draws the original bitmap on top of that
So any partially transparent areas of the original image are drawn over
a solid background colour, so anything drawn under them will not appear.
If:
1. You're viewing an account's media tab
2. Some of the media was marked sensitivei
3. The `alwaysShowSensitiveMedia` setting was `true`
tapping on the image (once) would do nothing visible, because it was
treated as the "reveal sensitive media" tap. You had to tap on it a
second time to open it.
Fix this, by passing the preference value through to the relevant code.
---------
Co-authored-by: Tiga! <maxiinne@proton.me>
To determine the earliest day to show in the calendar, take the current
date/time, add the minimum scheduled seconds buffer (which may roll the
date/time over to the next day), and then clamp to the start of that
day. So it's either today (if the current time + minimum scheduled
seconds is less than midnight) or it's tomorrow.
When displaying the calendar work around a misfeature in Material Date
Picker. It accepts UTC seconds-since-epoch, but does not convert it to
the local time for display.
While I'm here, show the selected day in the time picker's title.
Fixes https://github.com/tuskyapp/Tusky/issues/3916
The "edit" icon when showing a scheduled status' time was grey, so it's
not obvious that this section is clickable.
Use colorPrimary, so it looks more like a button.
The previous code used `notificationTabPosition`, which was never
changed, so always 0.
This meant that if you e.g., got to `MainActivity` by clicking on a
notification, and the notification tab was current, the title would
still show "Home".
Fix that by using the existing `position` variable which represents the
currently selected tab, and ensure the correct title is shown.
Fixes#3864.
Make it easier for people to find information we need for a bug report,
and show it on AboutActivity.
New info is:
- Device manufacturer (e.g., "Google") and model (e.g., "Pixel 4a (5G)")
- Android version (e.g., "13")
- SDK version (e.g., "33")
- Active account (e.g., "@Tusky@mastodon.social")
- Server's version (e.g., "4.1.2+nightly-20230627")
All info is copyable to make it easy to include in a bug report. A
button to copy the information is also shown.
Update to Kotlin 1.9.0 and migrate to newer language idioms.
- Remove unnecessary @OptIn for features migrated to mainstream
- Use `data object` where appropriate
- Use new enum `entries` property
Migrate to touchimageview from photoview, and adjust the touch logic to correctly handle single finger drag, two finger pinch/stretch, flings, taps, and swipes.
As before, the features are:
- Single tap, show/hide controls and media description
- Double tap, zoom in/out
- Single finger drag up/down, scale/translate image, dismiss if scrolled too far
- Single finger drag left/right
- When not zoomed, swipe to next image if multiple images present
- When zoomed, scroll to edge of image, then to next image if multiple images present
- Two finger pinch/zoom, zoom in/out on the image
Behaviour differences to previous code
1. Bug fix: The image can't get "stuck" when zoomed, and impossible to scroll
2. Bug fix: Pinching is not mis-interpreted as a fling, closing the image
3. Bug fix: The zoom state of images is not lost or misinterpreted when the user swipes through multiple images
4. Bug fix: Double-tap zooms all the way, instead of stopping
5. Tapping outside the image does not dismiss it, controls and description show/hide
Fixes https://github.com/tuskyapp/Tusky/issues/3562, https://github.com/tuskyapp/Tusky/issues/2297
Android lint was erroneously warning that the forEach construct in
Kotlin required API 24+, which is incorrect, see
https://issuetracker.google.com/issues/185418482.
Work around that by forcing the Android lint version to 8.1.0.
This triggered some additional checks, which have been ignored, and a
new baseline.
Preferences are shown using view holders.
The previous code did not clear the listeners or hide the icons if
necessary.
The practical upshot of this was that if you had two or more slider
preferences, *and* they were situated more than a screen's height apart,
the viewholder from the first one would get reused.
And if the first one enabled icons then the second one would show them.
And clicking on the second one would also call the listeners for the
first one.
As tests are run against locale JVM and test does not force
a locale to run, so some tests may fail due to a different result only
due to the locale of the JVM used.
Example here with test `same year formatting` in class
`AbsoluteTimeFormatterTest` line 30 on a French JVM. There may be other
lines to fail with other languages.
Fixes#3859
Currently translated at 100.0% (609 of 609 strings)
Translated using Weblate (Vietnamese)
Currently translated at 100.0% (609 of 609 strings)
Co-authored-by: Hồ Nhất Duy <mastoduy@gmail.com>
Translate-URL: https://weblate.tusky.app/projects/tusky/tusky/vi/
Translation: Tusky/Tusky
Currently translated at 100.0% (609 of 609 strings)
Translated using Weblate (Vietnamese)
Currently translated at 100.0% (604 of 604 strings)
Co-authored-by: Hồ Nhất Duy <mastoduy@gmail.com>
Translate-URL: https://weblate.tusky.app/projects/tusky/tusky/vi/
Translation: Tusky/Tusky
Currently translated at 100.0% (609 of 609 strings)
Translated using Weblate (Chinese (Simplified))
Currently translated at 100.0% (604 of 604 strings)
Co-authored-by: Eric <alchemillatruth@purelymail.com>
Translate-URL: https://weblate.tusky.app/projects/tusky/tusky/zh_Hans/
Translation: Tusky/Tusky
Currently translated at 100.0% (609 of 609 strings)
Translated using Weblate (Persian)
Currently translated at 100.0% (609 of 609 strings)
Translated using Weblate (Persian)
Currently translated at 100.0% (604 of 604 strings)
Co-authored-by: Danial Behzadi <dani.behzi@ubuntu.com>
Translate-URL: https://weblate.tusky.app/projects/tusky/tusky/fa/
Translation: Tusky/Tusky
GBoard and other IME's support pasting images, which are converted to attachments.
Sometimes these have labels that describe the image. If present, set it as the default alt-text.
Fixes#3799
Fix a crash where workers, in some conditions, should show a notification. These are sent to a dedicated channel with no importance.
Convert NotificationWorker to a CoroutineWorker and remove its use of `runBlocking`.
Fixes#3754
Most lists in the app use (explicitly or implicitly) platform metrics for dimensions, text size, colour, and so on, possibly via styles.
A few don't, inadvertently using the user's setting for status text size
Fix these, and simplify code where possible.
- Use android attributes for padding and height, for consistent UX.
- Remove explicit usage of app:tabTextAppearance, rely on the style.
- Remove ListSelectionAdapter and item_picker_list.xml, and adjust TabPreferenceActivity to use an ArrayAdapter with simple_list_item_1.xml
- Simplify item_followed_hashtag.xml, consistent with item_list.xml.
Fixes https://github.com/tuskyapp/Tusky/issues/3131
Font scaling is applied in addition to any scaling set in Android system preferences. So if the user set the Android font size to largest (a 1.3x increase) and then sets the preference to 120%, the total change is 1.56x.
Create SliderPreference to adjust the preference.
- Use Slider, which supports float values and step sizes > 1
- Display the selected value in the preference's summary
- Provide buttons to increment / decrement the value
Restart the activity if the preference changes so that the user sees the impact of the change immediately. Fix a bug in PreferencesActivity where the "EXTRA_RESTART_ON_BACK" intent was never processed. Fix this to ensure that other activities are restarted so the new font scale takes effect.
Implement the scaling in BaseActivity by overriding onAttachBaseContext, and providing a wrapped context with the font scaling applied.
Fixes https://github.com/tuskyapp/Tusky/issues/2982, https://github.com/tuskyapp/Tusky/issues/2461
Instead of repeating the same if/else check on the error type when setting up the background message, move this in to BackgroundMessageView.
Provide different `setup()` variants, including one that just takes a throwable and a handler, and figures out the correct drawables and error message.
Update and simplify call sites.
Currently translated at 100.0% (604 of 604 strings)
Translated using Weblate (Persian)
Currently translated at 100.0% (603 of 603 strings)
Co-authored-by: Danial Behzadi <dani.behzi@ubuntu.com>
Translate-URL: https://weblate.tusky.app/projects/tusky/tusky/fa/
Translation: Tusky/Tusky
This can happen if the edit history has not been propogated to the user's server.
If the edit history is missing then show an error with a link to the specifc Mastodon issue.
Fixes#3743
When the user is closing the compose view,
if it's new and empty, don't show a prompt.
if it's an existing draft and now empty, ask if the user wants to delete it or continue editing. I don't think there is much value in saving an empty draft.
---------
When NotificationWorker was moved from ...components.notifications to
...worker.
Installing Tusky with this change doesn't remove any future periodic
jobs queued under the old class name. So when Class.forName() is
called the old class name is not found, and the exception is thrown.
Handle this the same way androidx.work.WorkerFactory does -- catch
the exception, log it, and return null.
Fixes#3740
- Create a flow with new items (arbitrary ints) when a reload from the top should happen
- Combine this flow with notificationFilter, so changes to either of them trigger a reload
- Provide a menu item in NotificationsFragment to initiate the reload
- Handle the action in the view model
Remove the use of ReplacementSpan. It turns out this span type is incompatible with spans that occupy more than one line, and the result is that a longer diff can run off the end of the screen. The alternative means that the diff'd text doesn't have additional padding and rounded corners, but it's better than not being visible.
Display the most recent version of the status with larger text. Again, consistent with the thread view.
Display the avatar, name, and username of the poster in a pinned header at the top of the screen, instead of duplicating the information on every edit. This reduces the amount of redundant information on the screen.
The Android libraries have a bug where a TextView can forget that it contains selectable text, can be pasted in to, etc.
See https://issuetracker.google.com/issues/37095917
Fix this with an extension method that toggles the selectable state to re-enable it, and use this on the profile fields when editing an account.
Fixes https://github.com/tuskyapp/Tusky/issues/3706
- Use NO_POSITION instead of hardcoding 0.
- Don't set a state restoration policy, PagingDataAdapter already does that
- Return the closest item, not just the closest page, in getRefreshKey
It caused text size differences between the text in this view and all the other textviews in this layout.
It's not used in other layouts.
Fixes https://github.com/tuskyapp/Tusky/issues/3494
This will make tests that need it easier.
- Rename from AccountPreferenceHandler
- Inject its dependencies
- Create an injectable CoroutineScope it can use for launching coroutines
- Use it in AccountPreferences
Currently translated at 100.0% (601 of 601 strings)
Translated using Weblate (Persian)
Currently translated at 100.0% (601 of 601 strings)
Translated using Weblate (Icelandic)
Currently translated at 100.0% (601 of 601 strings)
Co-authored-by: Nik Clayton <nik@ngo.org.uk>
Translate-URL: https://weblate.tusky.app/projects/tusky/tusky/fa/
Translate-URL: https://weblate.tusky.app/projects/tusky/tusky/is/
Translation: Tusky/Tusky
Currently translated at 100.0% (601 of 601 strings)
Translated using Weblate (Icelandic)
Currently translated at 99.8% (600 of 601 strings)
Co-authored-by: Sveinn í Felli <sv1@fellsnet.is>
Translate-URL: https://weblate.tusky.app/projects/tusky/tusky/is/
Translation: Tusky/Tusky
In the previous code any errors that occured *before* a subscriber was
listening to `uiError` would be dropped, so the user would be unware
of them.
By implementing as a channel these errors will be shown to the user,
with an opportunity to retry the operation or report the error.
Introduce Flow<T>.throttleFirst(). In a flow this emits the first value,
and each value afterwards that is > some timeout after the previous
value.
This prevents accidental double-taps on UI elements from generating
multiple-actions.
The previous code used debounce(). That has a similar effect, but with
debounce() the code has to wait until after the timeout period has
elapsed before it can process the action, leading to an unnecessary
UI delay.
With throttleFirst a value is emitted immediately, there's no need
to wait. It's subsequent values that are potentially throttled.
- Extend what was `NotificationWorkerFactory` to `WorkerFactory`. This
can construct arbitrary Workers as long as they provide their own
Factory for construction.
The per-Worker factory contains any injected components just for that
worker type, keeping `WorkerFactory` clean.
- Move `NotificationWorkerFactory` to the new model.
- Implement `PruneCacheWorker`, and remove the code from
`CachedTimelineViewModel`.
- Create the periodic worker in `TuskyApplication`, ensuring that the
database is only pruned when the device is idle.
formatNumber() was existing code to show numbers with suffixes like K, M, etc, so re-use that code and delete shortNumber().
Update the tests to (a) test formatNumber(), and (b) be parameterised.
* Fetch all outstanding Mastodon notifications when creating Android notifications
Previous code fetched the oldest page of unfetched Mastodon notifications.
If you had more than a page of Mastodon notifications you'd get Android notifications for that page, then ~ 15 minutes later Android notifications for the next page, and so on.
This code fetches all the outstanding notifications at once.
If this results in more than 40 total notifications the list is still trimmed so that a maximum of 40 Android notifications is displayed.
Fixes https://github.com/tuskyapp/Tusky/issues/3648
* Build the list using buildList
Don't use `accountManager.activeAccount` throughout the code.
Instead, get the active account once, and use that over the life of the viewmodel.
As shown in https://github.com/tuskyapp/Tusky/issues/3689#issuecomment-1567219338 the active account can change before the view model is destroyed, and if that happens account information for the account will be written to the wrong account.
Fix a bug where the active account can be overwritten.
1. Have two accounts logged in to Tusky, A and B
2. Open Tusky as account A
3. Send a DM to account B (doesn't have to be a DM, just anything that creates a notification for account B)
4. Restart Tusky so the Android notification for the DM is displayed immediately. You are still acting as account A.
5. Drag down the Android notification, you should see two options, "Quick reply" and "Compose"
6. Tap "Compose"
7. ComposeActivity will start. You are now acting as account B. Compose and send a reply
8. You'll be returned to the "Home" tab.
The UI will show you are still account A (i.e., it's account A's avatar at the top of the screen, if you have the "Show username in toolbars" option turned on it will be account A's username in the toolbar).
But you are now seeing the home timeline for account B.
Fix this.
ComposeViewModel
- Do not rely on the active account in sendStatus(), receive the account ID as a parameter
ComposeActivity
- Use either the account ID from the intent, or the current active account. **Do not** change the active account
- Pass the account ID to use in the sendStatus() call
The previous code gets the user's reading position *once*, when the
viewmodel is created, and uses that whenever it needs to be restored.
This is a problem. Suppose the user is a few days behind on their
notifications, and opens the app.
The reading position is restored, as expected. They scroll up to start
reading newer notifications.
Then they change their notification filters. This causes the
notifications list to change, and when it does their reading position
is set back to what it was when they first switched to the Notifications
tab.
Fix this by:
NotificationsFragment:
- Save the reading position whenever the user stops scrolling.
NotificationsViewModel:
- Use the saved reading position whenever the list of notifications
can change, not just when the view model is created.
Not all servers support the marker API. If they don't the user will
potentially get duplicate Android notifications.
To resolve this, store a copy of the notification marker ID locally as
well. Defer to the remote marker if it exists (and is newer than the
local marker).
Fixes https://github.com/tuskyapp/Tusky/issues/3671
When fetching:
- Maintain a marker with the position of the newest fetched notification
- Use the marker to determine which notifications to fetch
- Fetch notifications with min_id to ensure that none are lost
- Update the marker as necessary
- Perform a one-time immediate fetch of notifications on startup
When creating notifications:
- Identify each notification with tag=${MastodonNotificationId}, id=${account.id}
- Remove activeNotifications field, it's no longer necessary
- Use the tag/id tuple to reliably identify existing notifications and avoid creating duplicates
- Cancelling notifications for an account must iterate over all the notifications, and individually remove the notifications that exist for that account.
- Limit notifications to a maximum of 40 (excluding summary notifications)
- Remove notifications (oldest first) to get under this limit
- Rate limit notification creation to 1 per second, so the OS won't drop them
Adjust the summary notification:
- Ensure the summary notification and the child notifications have the same group key
- Dismiss the summary notification if there is only one child notification
NotificationClearBroadcastReceiver is no longer needed, so remove it, and the need for deletePendingIntent.
Fixes#3625, #3539
Currently translated at 98.0% (589 of 601 strings)
Translated using Weblate (Belarusian)
Currently translated at 95.0% (571 of 601 strings)
Co-authored-by: xzFantom <xzfantom@gmail.com>
Translate-URL: https://weblate.tusky.app/projects/tusky/tusky/be/
Translation: Tusky/Tusky
Currently translated at 100.0% (601 of 601 strings)
Translated using Weblate (French)
Currently translated at 97.8% (588 of 601 strings)
Translated using Weblate (French)
Currently translated at 89.5% (538 of 601 strings)
Translated using Weblate (French)
Currently translated at 79.5% (478 of 601 strings)
Co-authored-by: codl <codl@codl.fr>
Translate-URL: https://weblate.tusky.app/projects/tusky/tusky/fr/
Translation: Tusky/Tusky
- Add a field to AccountEntity to hold the reading position
- Provide a method to save in the viewmodel to save the position
- Save the position when TimelineFragment pauses
Does not restore the position yet.
Requesting a non-existent notification ID will cause the fall-back requests to succeed but return empty lists which stops pagination.
Check for this, and in the worst case, fall back to returning the most recent notifications.
On Account preferences > Filters
With the list hidden on an empty view the FAB is erroneouly placed on the top left of the screen.
(Introduced with #3430)
Add additional 6dp margin to the top of the username view, to provide more space after the "X <performed an action>" view, consistent with item_follow.xml.
The pageSize is large enough that there's no need for the default 3 x pageSize initialLoadSize value, and this improves performance.
Fixes https://github.com/tuskyapp/Tusky/issues/3578
This makes the notification view for a follow request contain more info about the new follower, and makes the layout (of their name / username) consistent with other notifications that show names/usernames.
Previous code would discard the image alt-text if the user finished writing the text before the image had finished uploading.
This code ensures the text is set after the image has completed uploading.
* Disable lint checks for unused resource IDs
The check doesn't catch some instances where resources are used through viewbinding, and has too many false positives to be useful.
* Regenerate lint baseline
Delete the existing file, then regenerated with `.\gradlew lintBlueDebug -Dlint.baselines.continue=true`
Nik Clayton
Levi Bard
Mike Haynes
Martin Marconcini
Martin Marconcini
Lakoja
SpaceFox
Weblate
Angelo Suzuki
Konrad Pozniak
Martin Marconcini
puf
Ümit Solmaz
Hồ Nhất Duy
S. Lee
Eric
Oliebol
Danial Behzadi
GunChleoc
Ihor Hordiichuk
Deleted User
Mike Barnes
Quentí
Goooler
Suguru Hirahara
Connyduck
Yannis D
XoseM
Sveinn í Felli
Rhoslyn Prys
Conny Duck
Sotolf Flasskjegg
Santiago Kozak
TAKAHASHI Shuuji
Gera, Zoltan
Deleted User
Luna Jernberg
Manuel
Chaitanya
junius
L.Yo
sk
Prat
Balázs Meskó
João Alves
Mārtiņš Bruņenieks
Deleted User
Gordot Forrot
Andrés Blasco Arnáiz
Deleted User
Deleted User
Deleted User
Deleted User
Paul Sanz
Hakan
xzFantom
Subham Jena
codl
Deleted User
