PicciHud/mywiki
1
0
Fork 0
Code Issues Pull Requests Projects Releases Wiki Activity
mywiki/Vim.md
piccihud 92922be075 fix Bash.md and Vim.md. Add some plugin
2023-02-05 21:26:24 +01:00

707 lines
28 KiB
Markdown
Raw Blame History

This file contains ambiguous Unicode characters

This file contains Unicode characters that might be confused with other characters. If you think that this is intentional, you can safely ignore this warning. Use the Escape button to reveal them.

# Vim
Vim è un editor di testo molto potente, che può essere ampliato ulteriormente tramite **plugin** vari.
Prima, però, ecco una configurazione base che aggiunge varie funzionalità:
```vim
" IMPOSTAZIONI ----------------------------------------------------------- {{{
colorscheme catppuccin_mocha
set spell spelllang=it,en
syntax on " Enable type file detection. Vim will be able to try to detect the type of file in use.
filetype off " Enable plugins and load plugin for the detected file type.
set nocompatible " be iMproved, required
filetype plugin indent on " required
filetype plugin on " Load an indent file for the detected file type.
filetype indent on
set foldenable
set autoindent
set ruler " Shows the rulers
set showcmd " Shows current cursor info
set autoindent " Automatically guesses the indentation given the previous one
set hlsearch " Automatically highlights search results, to hide them run :noh
set incsearch " Searches incrementally as you type.
set ignorecase " Ignores cases when searching
set noswapfile " Disables swap files
set undofile " Enable keeping history across sessions, don't forget to mkdir
set undodir=~/.vim/undo/
set nofixeol " Do not insert a new line at the end of the file automatically
set backspace=indent,eol,start " Enable backspace key to delete stuffs properly
set termguicolors
set number " Add numbers to each line on the left-hand side.
set relativenumber
set clipboard=unnamedplus
set cursorline " Highlight cursor line underneath the cursor horizontally.
set cursorcolumn " Highlight cursor line underneath the cursor vertically.
set nobackup " Do not save backup files.
set nowrap " Do not wrap lines. Allow long lines to extend as far as the line goes.
set incsearch " While searching though a file incrementally highlight matching characters as you type.
set ignorecase " Ignore capital letters during search.
set smartcase " This will allow you to search specifically for capital letters.
set showmode " Show the mode you are on the last line.
set showmatch " Show matching words during a search.
set hlsearch " Use highlighting when doing a search.
set wildmenu " Enable auto completion menu after pressing TAB.
set wildmode=list:longest " Make wildmenu behave like similar to Bash completion.
set foldenable
set foldmethod=indent
set ttyfast " Speed up scrolling in Vim
set encoding=UTF-8
set nobackup " Neoclide
set nowritebackup
set updatetime=300
set signcolumn=yes
" }}}
```
## Plugin Manager
Per poter installare dei plugin è necessario installare prima un plugin-manager.
### Vundle
```bash
git clone https://github.com/VundleVim/Vundle.vim.git ~/.vim/bundle/Vundle.vim
```
Dopo aver clonato Vundle sulla propria macchina, inserire le seguenti righe di testo nel file `.vimrc`
```vimrc
" PLUGINS ---------------------------------------------------------------- {{{
" set the runtime path to include Vundle and initialize
set rtp+=~/.vim/bundle/Vundle.vim
call vundle#begin()
" let Vundle manage Vundle, required
Plugin 'VundleVim/Vundle.vim'
"
" All of your Plugins must be added before the following line
"
call vundle#end() " required
" }}}
```
## Installazione plugin
Installare un plugin è molto semplice, basta aggiungerlo nel file `.vimrc`, come da codice sottostante:
```vim
" PLUGINS ---------------------------------------------------------------- {{{
" set the runtime path to include Vundle and initialize
set rtp+=~/.vim/bundle/Vundle.vim
call vundle#begin()
" let Vundle manage Vundle, required
Plugin 'VundleVim/Vundle.vim'
"
" All of your Plugins must be added before the following line
"
Plugin 'preservim/nerdtree'
Plugin 'iamcco/markdown-preview.nvim'
Plugin 'sheerun/vim-polyglot'
Plugin 'alvan/vim-closetag'
Plugin 'mattn/emmet-vim'
Plugin 'jiangmiao/auto-pairs'
Plugin 'ryanoasis/vim-devicons'
Plugin 'frazrepo/vim-rainbow'
Plugin 'mg979/vim-visual-multi', {'branch': 'master'}
Plugin 'itchyny/lightline.vim'
Plugin 'voldikss/vim-floaterm'
Plugin 'neoclide/coc.nvim', {'branch': 'release'}
Bundle 'https://github.com/prashanthellina/follow-markdown-links'
Plugin 'itchyny/calendar.vim'
Plugin 'mracos/mermaid.vim'
Plugin 'mzlogin/vim-markdown-toc'
Plugin 'bbrtj/vim-vorg-md'
call vundle#end() " required
" }}}
```
Una volta salvato il file, digitare `:PluginInstall`.
Quando l'installazione è completata, è buona norma cancellare la cache del buffer digitando il comando `:bdelete`.
È possibile ricercare plugin nel Web oppure tramite il comando `:PluginSearch`. Per aggiornare l'elenco locale dei plugin dal sito vimscripts digitare:
`:PluginSearch!`
### Alcuni plugin utili
- [https://github.com/preservim/nerdtree](https://github.com/preservim/nerdtree)
- [https://github.com/VundleVim/Vundle.vim](https://github.com/VundleVim/Vundle.vim)
- [https://github.com/sheerun/vim-polyglot](https://github.com/sheerun/vim-polyglot)
- [https://github.com/alvan/vim-closetag](https://github.com/alvan/vim-closetag)
- [https://github.com/mattn/emmet-vim](https://github.com/mattn/emmet-vim)
- [https://github.com/ryanoasis/vim-devicons](https://github.com/ryanoasis/vim-devicons)
- [https://github.com/nopecha-ai/nopecha-extension](https://github.com/nopecha-ai/nopecha-extension)
- [https://github.com/thameera/vimv](https://github.com/thameera/vimv)
- [https://github.com/voldikss/vim-floaterm#requirements](https://github.com/voldikss/vim-floaterm#requirements)
- [https://github.com/akrawchyk/awesome-vim](https://github.com/akrawchyk/awesome-vim)
- [https://github.com/neoclide/coc.nvim](https://github.com/neoclide/coc.nvim)
- [https://github.com/fannheyward/coc-marketplace](https://github.com/fannheyward/coc-marketplace)
- [https://github.com/OmniSharp/omnisharp-vim](https://github.com/OmniSharp/omnisharp-vim)
- [https://github.com/ncm2/ncm2](https://github.com/ncm2/ncm2)
- [https://github.com/prashanthellina/follow-markdown-links](https://github.com/prashanthellina/follow-markdown-links)
- [https://github.com/itchyny/calendar.vim](https://github.com/itchyny/calendar.vim)
- [https://github.com/mracos/mermaid.vim](https://github.com/mracos/mermaid.vim)
- [https://github.com/bbrtj/vim-vorg-md](https://github.com/bbrtj/vim-vorg-md)
- [https://github.com/rderik/vim-markdown-toc](https://github.com/rderik/vim-markdown-toc)
- [https://github.com/tpope/vim-commentary](https://github.com/tpope/vim-commentary)
- [https://clay-atlas.com/us/blog/2021/07/04/vim-en-you-complete-me-plugin-auto-code/](https://clay-atlas.com/us/blog/2021/07/04/vim-en-you-complete-me-plugin-auto-code/)
- [https://github.com/ycm-core/YouCompleteMe](https://github.com/ycm-core/YouCompleteMe)
- [https://github.com/primitivorm/vim-predictive](https://github.com/primitivorm/vim-predictive)
Nel caso di `neoclide`, da installare i seguenti moduli:
```vim
CocInstall coc-cmake coc-css coc-cssmodules coc-docker coc-emmet coc-explorer coc-flutter coc-highlight coc-html coc-htmlhint coc-html-css-support coc-json coc-ltex coc-markdown-preview-enhanced coc-markdownlint coc-omnisharp coc-prettier coc-python coc-sh coc-sql coc-svelte coc-svg coc-vimlsp coc-xml coc-yaml coc-markdown-preview-enhanced coc-webview
```
## .vimrc
```vim
" IMPOSTAZIONI ----------------------------------------------------------- {{{
colorscheme catppuccin_mocha
set spell spelllang=it,en
syntax on " Enable type file detection. Vim will be able to try to detect the type of file in use.
filetype off " Enable plugins and load plugin for the detected file type.
set nocompatible " be iMproved, required
filetype plugin indent on " required
filetype plugin on " Load an indent file for the detected file type.
filetype indent on
set foldenable
set autoindent
set autoindent " Automatically guesses the indentation given the previous one
set hlsearch " Automatically highlights search results, to hide them run :noh
set incsearch " Searches incrementally as you type.
set ruler " Shows the rulers
set showcmd " Shows current cursor info
set ignorecase " Ignores cases when searching
set noswapfile " Disables swap files
set undofile " Enable keeping history across sessions, don't forget to mkdir
set undodir=~/.vim/undo/
set nofixeol " Do not insert a new line at the end of the file automatically
set backspace=indent,eol,start " Enable backspace key to delete stuffs properly
set termguicolors
set number " Add numbers to each line on the left-hand side.
set relativenumber
set clipboard=unnamedplus
set cursorline " Highlight cursor line underneath the cursor horizontally.
set cursorcolumn " Highlight cursor line underneath the cursor vertically.
set nobackup " Do not save backup files.
set nowrap " Do not wrap lines. Allow long lines to extend as far as the line goes.
set incsearch " While searching though a file incrementally highlight matching characters as you type.
set ignorecase " Ignore capital letters during search.
set smartcase " This will allow you to search specifically for capital letters.
set showmode " Show the mode you are on the last line.
set showmatch " Show matching words during a search.
set hlsearch " Use highlighting when doing a search.
set wildmenu " Enable auto completion menu after pressing TAB.
set wildmode=list:longest " Make wildmenu behave like similar to Bash completion.
set foldenable
set foldmethod=indent
set ttyfast " Speed up scrolling in Vim
set encoding=UTF-8
set nobackup " Neoclide
set nowritebackup
set updatetime=300
set signcolumn=yes
" }}}
" PLUGINS ---------------------------------------------------------------- {{{
" set the runtime path to include Vundle and initialize
set rtp+=~/.vim/bundle/Vundle.vim
call vundle#begin()
" let Vundle manage Vundle, required
Plugin 'VundleVim/Vundle.vim'
"
" All of your Plugins must be added before the following line
"
Plugin 'preservim/nerdtree'
Plugin 'iamcco/markdown-preview.nvim'
Plugin 'sheerun/vim-polyglot'
Plugin 'alvan/vim-closetag'
Plugin 'mattn/emmet-vim'
Plugin 'jiangmiao/auto-pairs'
Plugin 'ryanoasis/vim-devicons'
Plugin 'frazrepo/vim-rainbow'
Plugin 'mg979/vim-visual-multi', {'branch': 'master'}
Plugin 'itchyny/lightline.vim'
Plugin 'voldikss/vim-floaterm'
Plugin 'neoclide/coc.nvim', {'branch': 'release'}
Bundle 'https://github.com/prashanthellina/follow-markdown-links'
Plugin 'itchyny/calendar.vim'
Plugin 'mracos/mermaid.vim'
Plugin 'mzlogin/vim-markdown-toc'
Plugin 'bbrtj/vim-vorg-md'
call vundle#end() " required
" }}}
" MAPPINGS --------------------------------------------------------------- {{{
" Mappings code goes here.
" }}}
" VIMSCRIPT -------------------------------------------------------------- {{{
" This will enable code folding.
" zo per aprire una singola piega sotto il cursore.
" zc per chiudere la piega sotto il cursore.
" zR per aprire tutte le pieghe.
" zM per chiudere tutte le pieghe.
augroup filetype_vim
autocmd!
autocmd FileType vim setlocal foldmethod=marker
augroup END
" More Vimscripts code goes here.
" }}}
" NERD-TREE ------------------------------------------------------------- {{{
"
" Start NERDTree and put the cursor back in the other window.
autocmd VimEnter * NERDTree | wincmd p"
"
" Exit Vim if NERDTree is the only window remaining in the only tab.
autocmd BufEnter * if tabpagenr('$') == 1 && winnr('$') == 1 && exists('b:NERDTree') && b:NERDTree.isTabTree() | quit | endif"
"
" Close the tab if NERDTree is the only window remaining in it.
autocmd BufEnter * if winnr('$') == 1 && exists('b:NERDTree') && b:NERDTree.isTabTree() | quit | endif
"
" Open the existing NERDTree on each new tab.
autocmd BufWinEnter * if getcmdwintype() == '' | silent NERDTreeMirror | endif
" }}}
" MD-FOLDING ------------------------------------------------------------- {{{
"
let g:markdown_folding = 1
"
"zo open current fold
"zO recursively open current fold
"zc close current fold
"zC recursively close current fold
"za toggle current fold
"zA recursively open/close current fold
"zm reduce foldlevel by one
"zM close all folds
"zr increase foldlevel by one
"zR open all folds
" }}}
" MARK-DOWN-PREVIEW ----------------------------------------------------- {{{
" https://github.com/iamcco/markdown-preview.nvim
"
" set to 1, nvim will open the preview window after entering the markdown buffer
" default: 0
let g:mkdp_auto_start = 0
" set to 1, the nvim will auto close current preview window when change
" from markdown buffer to another buffer
" default: 1
let g:mkdp_auto_close = 1
" set to 1, the vim will refresh markdown when save the buffer or
" leave from insert mode, default 0 is auto refresh markdown as you edit or
" move the cursor
" default: 0
let g:mkdp_refresh_slow = 0
" set to 1, the MarkdownPreview command can be use for all files,
" by default it can be use in markdown file
" default: 0
let g:mkdp_command_for_global = 0
" set to 1, preview server available to others in your network
" by default, the server listens on localhost (127.0.0.1)
" default: 0
let g:mkdp_open_to_the_world = 0
" use custom IP to open preview page
" useful when you work in remote vim and preview on local browser
" more detail see: https://github.com/iamcco/markdown-preview.nvim/pull/9
" default empty
let g:mkdp_open_ip = ''
" specify browser to open preview page
" for path with space
" valid: `/path/with\ space/xxx`
" invalid: `/path/with\\ space/xxx`
" default: ''
let g:mkdp_browser = ''
" set to 1, echo preview page url in command line when open preview page
" default is 0
let g:mkdp_echo_preview_url = 0
" a custom vim function name to open preview page
" this function will receive url as param
" default is empty
let g:mkdp_browserfunc = ''
" options for markdown render
" mkit: markdown-it options for render
" katex: katex options for math
" uml: markdown-it-plantuml options
" maid: mermaid options
" disable_sync_scroll: if disable sync scroll, default 0
" sync_scroll_type: 'middle', 'top' or 'relative', default value is 'middle'
" middle: mean the cursor position alway show at the middle of the preview page
" top: mean the vim top viewport alway show at the top of the preview page
" relative: mean the cursor position alway show at the relative positon of the preview page
" hide_yaml_meta: if hide yaml metadata, default is 1
" sequence_diagrams: js-sequence-diagrams options
" content_editable: if enable content editable for preview page, default: v:false
" disable_filename: if disable filename header for preview page, default: 0
let g:mkdp_preview_options = {
\ 'mkit': {},
\ 'katex': {},
\ 'uml': {},
\ 'maid': {},
\ 'disable_sync_scroll': 0,
\ 'sync_scroll_type': 'middle',
\ 'hide_yaml_meta': 1,
\ 'sequence_diagrams': {},
\ 'flowchart_diagrams': {},
\ 'content_editable': v:false,
\ 'disable_filename': 0,
\ 'toc': {}
\ }
" use a custom markdown style must be absolute path
" like '/Users/username/markdown.css' or expand('~/markdown.css')
let g:mkdp_markdown_css = ''
" use a custom highlight style must absolute path
" like '/Users/username/highlight.css' or expand('~/highlight.css')
let g:mkdp_highlight_css = ''
" use a custom port to start server or empty for random
let g:mkdp_port = ''
" preview page title
" ${name} will be replace with the file name
let g:mkdp_page_title = '「${name}」'
" recognized filetypes
" these filetypes will have MarkdownPreview... commands
let g:mkdp_filetypes = ['markdown']
" set default theme (dark or light)
" By default the theme is define according to the preferences of the system
let g:mkdp_theme = 'dark'
" }}}
" VIM-TAG --------------------------------------------------------------- {{{
"
" filenames like *.xml, *.html, *.xhtml, ...
" These are the file extensions where this plugin is enabled.
"
let g:closetag_filenames = '*.html,*.xhtml,*.phtml'
" filenames like *.xml, *.xhtml, ...
" This will make the list of non-closing tags self-closing in the specified files.
"
let g:closetag_xhtml_filenames = '*.xhtml,*.jsx'
" filetypes like xml, html, xhtml, ...
" These are the file types where this plugin is enabled.
"
let g:closetag_filetypes = 'html,xhtml,phtml'
" filetypes like xml, xhtml, ...
" This will make the list of non-closing tags self-closing in the specified files.
"
let g:closetag_xhtml_filetypes = 'xhtml,jsx'
" integer value [0|1]
" This will make the list of non-closing tags case-sensitive (e.g. `<Link>` will be closed while `<link>` won't.)
"
let g:closetag_emptyTags_caseSensitive = 1
" dict
" Disables auto-close if not in a "valid" region (based on filetype)
"
let g:closetag_regions = {
\ 'typescript.tsx': 'jsxRegion,tsxRegion',
\ 'javascript.jsx': 'jsxRegion',
\ 'typescriptreact': 'jsxRegion,tsxRegion',
\ 'javascriptreact': 'jsxRegion',
\ }
" Shortcut for closing tags, default is '>'
"
let g:closetag_shortcut = '>'
" Add > at current position without closing the current tag, default is ''
"
let g:closetag_close_shortcut = '<leader>>'
" }}}
" EMMET-PLUGIN --------------------------------------------------------- {{{
let g:user_emmet_settings = {
\ 'variables': {'lang': 'ja'},
\ 'html': {
\ 'default_attributes': {
\ 'option': {'value': v:null},
\ 'textarea': {'id': v:null, 'name': v:null, 'cols': 10, 'rows': 10},
\ },
\ 'snippets': {
\ 'html:5': "<!DOCTYPE html>\n"
\ ."<html lang=\"en\">\n"
\ ."<head>\n"
\ ."\t<meta charset=\"${charset}\">\n"
\ ."\t<meta http-equiv=\"X-UA-Compatible\" content=\"IE=edge\">\n"
\ ."\t<meta name=\"viewport\" content=\"width=device-width, initial-scale=1.0\">\n"
\ ."\t<title></title>\n"
\ ."</head>\n"
\ ."<body>\n\t${child}|\n</body>\n"
\ ."</html>",
\ },
\ },
\}
" }}}
" RAINBOW PARENTHESES -------------------------------------------------- {{{
" https://github.com/frazrepo/vim-rainbow
let g:rainbow_ctermfgs = ['lightblue', 'lightgreen', 'yellow', 'red', 'magenta']
"}}}
" MULTI-CURSOR --------------------------------------------------------- {{{
" https://github.com/mg979/vim-visual-multi
"To make a basic selection, use the Ctrl+N keystroke in normal mode, followed by a motion:
"c – change text.
"I – insert at start of range.
"A – insert at end of range.
let g:multi_cursor_use_default_mapping=0
" Default mapping
let g:multi_cursor_start_word_key = '<C-n>'
let g:multi_cursor_select_all_word_key = '<A-n>'
let g:multi_cursor_start_key = 'g<C-n>'
let g:multi_cursor_select_all_key = 'g<A-n>'
let g:multi_cursor_next_key = '<C-n>'
let g:multi_cursor_prev_key = '<C-p>'
let g:multi_cursor_skip_key = '<C-x>'
let g:multi_cursor_quit_key = '<Esc>'
"}}}
" VIM-LIGHTLINE --------------------------------------------------------- {{{
" https://github.com/itchyny/lightline.vim
let g:lightline = {
\ 'colorscheme': 'wombat',
\ }
" }}}
" COC-NEOCLIDE ---------------------------------------------------------- {{{
" https://github.com/neoclide/coc.nvim
" https://github.com/neoclide/coc.nvim/wiki/Using-coc-extensions
" Use tab for trigger completion with characters ahead and navigate
" NOTE: There's always complete item selected by default, you may want to enable
" no select by `"suggest.noselect": true` in your configuration file
" NOTE: Use command ':verbose imap <tab>' to make sure tab is not mapped by
" other plugin before putting this into your config
inoremap <silent><expr> <TAB>
\ coc#pum#visible() ? coc#pum#next(1) :
\ CheckBackspace() ? "\<Tab>" :
\ coc#refresh()
inoremap <expr><S-TAB> coc#pum#visible() ? coc#pum#prev(1) : "\<C-h>"
" Make <CR> to accept selected completion item or notify coc.nvim to format
" <C-g>u breaks current undo, please make your own choice
inoremap <silent><expr> <CR> coc#pum#visible() ? coc#pum#confirm()
\: "\<C-g>u\<CR>\<c-r>=coc#on_enter()\<CR>"
function! CheckBackspace() abort
let col = col('.') - 1
return !col || getline('.')[col - 1] =~# '\s'
endfunction
" Use <c-space> to trigger completion
if has('nvim')
inoremap <silent><expr> <c-space> coc#refresh()
else
inoremap <silent><expr> <c-@> coc#refresh()
endif
" Use `[g` and `]g` to navigate diagnostics
" Use `:CocDiagnostics` to get all diagnostics of current buffer in location list
nmap <silent> [g <Plug>(coc-diagnostic-prev)
nmap <silent> ]g <Plug>(coc-diagnostic-next)
" GoTo code navigation
nmap <silent> gd <Plug>(coc-definition)
nmap <silent> gy <Plug>(coc-type-definition)
nmap <silent> gi <Plug>(coc-implementation)
nmap <silent> gr <Plug>(coc-references)
" Use K to show documentation in preview window
nnoremap <silent> K :call ShowDocumentation()<CR>
function! ShowDocumentation()
if CocAction('hasProvider', 'hover')
call CocActionAsync('doHover')
else
call feedkeys('K', 'in')
endif
endfunction
" Highlight the symbol and its references when holding the cursor
autocmd CursorHold * silent call CocActionAsync('highlight')
" Symbol renaming
nmap <leader>rn <Plug>(coc-rename)
" Formatting selected code
xmap <leader>f <Plug>(coc-format-selected)
nmap <leader>f <Plug>(coc-format-selected)
augroup mygroup
autocmd!
" Setup formatexpr specified filetype(s)
autocmd FileType typescript,json setl formatexpr=CocAction('formatSelected')
" Update signature help on jump placeholder
autocmd User CocJumpPlaceholder call CocActionAsync('showSignatureHelp')
augroup end
" Applying code actions to the selected code block
" Example: `<leader>aap` for current paragraph
xmap <leader>a <Plug>(coc-codeaction-selected)
nmap <leader>a <Plug>(coc-codeaction-selected)
" Remap keys for applying code actions at the cursor position
nmap <leader>ac <Plug>(coc-codeaction-cursor)
" Remap keys for apply code actions affect whole buffer
nmap <leader>as <Plug>(coc-codeaction-source)
" Apply the most preferred quickfix action to fix diagnostic on the current line
nmap <leader>qf <Plug>(coc-fix-current)
" Remap keys for applying refactor code actions
nmap <silent> <leader>re <Plug>(coc-codeaction-refactor)
xmap <silent> <leader>r <Plug>(coc-codeaction-refactor-selected)
nmap <silent> <leader>r <Plug>(coc-codeaction-refactor-selected)
" Run the Code Lens action on the current line
nmap <leader>cl <Plug>(coc-codelens-action)
" Map function and class text objects
" NOTE: Requires 'textDocument.documentSymbol' support from the language server
xmap if <Plug>(coc-funcobj-i)
omap if <Plug>(coc-funcobj-i)
xmap af <Plug>(coc-funcobj-a)
omap af <Plug>(coc-funcobj-a)
xmap ic <Plug>(coc-classobj-i)
omap ic <Plug>(coc-classobj-i)
xmap ac <Plug>(coc-classobj-a)
omap ac <Plug>(coc-classobj-a)
" Remap <C-f> and <C-b> to scroll float windows/popups
if has('nvim-0.4.0') || has('patch-8.2.0750')
nnoremap <silent><nowait><expr> <C-f> coc#float#has_scroll() ? coc#float#scroll(1) : "\<C-f>"
nnoremap <silent><nowait><expr> <C-b> coc#float#has_scroll() ? coc#float#scroll(0) : "\<C-b>"
inoremap <silent><nowait><expr> <C-f> coc#float#has_scroll() ? "\<c-r>=coc#float#scroll(1)\<cr>" : "\<Right>"
inoremap <silent><nowait><expr> <C-b> coc#float#has_scroll() ? "\<c-r>=coc#float#scroll(0)\<cr>" : "\<Left>"
vnoremap <silent><nowait><expr> <C-f> coc#float#has_scroll() ? coc#float#scroll(1) : "\<C-f>"
vnoremap <silent><nowait><expr> <C-b> coc#float#has_scroll() ? coc#float#scroll(0) : "\<C-b>"
endif
" Use CTRL-S for selections ranges
" Requires 'textDocument/selectionRange' support of language server
nmap <silent> <C-s> <Plug>(coc-range-select)
xmap <silent> <C-s> <Plug>(coc-range-select)
" Add `:Format` command to format current buffer
command! -nargs=0 Format :call CocActionAsync('format')
" Add `:Fold` command to fold current buffer
command! -nargs=? Fold :call CocAction('fold', <f-args>)
" Add `:OR` command for organize imports of the current buffer
command! -nargs=0 OR :call CocActionAsync('runCommand', 'editor.action.organizeImport')
" Add (Neo)Vim's native statusline support
" NOTE: Please see `:h coc-status` for integrations with external plugins that
" provide custom statusline: lightline.vim, vim-airline
set statusline^=%{coc#status()}%{get(b:,'coc_current_function','')}
" Mappings for CoCList
" Show all diagnostics
nnoremap <silent><nowait> <space>a :<C-u>CocList diagnostics<cr>
" Manage extensions
nnoremap <silent><nowait> <space>e :<C-u>CocList extensions<cr>
" Show commands
nnoremap <silent><nowait> <space>c :<C-u>CocList commands<cr>
" Find symbol of current document
nnoremap <silent><nowait> <space>o :<C-u>CocList outline<cr>
" Search workspace symbols
nnoremap <silent><nowait> <space>s :<C-u>CocList -I symbols<cr>
" Do default action for next item
nnoremap <silent><nowait> <space>j :<C-u>CocNext<CR>
" Do default action for previous item
nnoremap <silent><nowait> <space>k :<C-u>CocPrev<CR>
" Resume latest coc list
nnoremap <silent><nowait> <space>p :<C-u>CocListResume<CR>
" }}}
```
## Comandi utili
| Comando | Funzione |
|-----------|------------------------------------------------------------------------------------------------------------------------------------------------|
| `gx` | Apre il link sotto al cursore nel browser |
| `:m +/-n` | Sposta la riga sopra o sotto di *n* posizioni |
| `"+y` | In Visual Mode, copia il testo selezionato nella clipboard del SO |
| `vimv` | Da terminale, permette di rinominare cartelle e file coi comandi di Vim ([https://github.com/thameera/vimv](https://github.com/thameera/vimv)) |
| `:args` | Seleziona dei file come argomenti. È possibile utilizzare i caratteri jolly |
| `:argdo` | Permette di eseguire un comando su n files |
Ad esempio:
```vim
:argdo %s/stringToBeReplaced/replacementString/g | update
```
`update` serve per salvare le modifiche automaticamente.
## Collegamenti
- [https://irian.to/blogs/how-to-search-and-replace-string-across-multiple-files-in-vim/](https://irian.to/blogs/how-to-search-and-replace-string-across-multiple-files-in-vim/)
- [https://linuxhint.com/vim-copy-text-system-clipboard/](https://linuxhint.com/vim-copy-text-system-clipboard/)
Reference in New Issue View Git Blame Copy Permalink