The crash was caused by an uncaught exception when calling
`MastodonApi#domainBlocks`.
Update the `BackgroundMessageView` for the error message so it fills the
screen like on other pages.
Fixes#696
Previous code was inconsistent about using getServerErrorMessage() and
whether or not the case where getServerErrorMessage() returns null was
handled.
Switch to using getErrorString() which does handle the null case and
always returns a usable string.
Some string resources are rendered temporarily unused by this change.
They will be used again soon, so configure lint to ignore them at the
moment.
Previous code always included the transitionKind enum as an extra, and
could cause a crash if the activity launched by the intent was not a
Pachli activity.
Fixes#700.
The F-Droid API can return a `suggestedVersionCode` that F-Droid has not
successfully built (e.g., there was a network issue preventing F-Droid
from fetching the source code at the time of the last build).
This meant users were being prompted to update when there was not a
built package to update to.
Fix this by verifying that `suggestedVersionCode` appears in the list of
packages. If it doesn't then fall back to the highest version code in
the list of packages.
Fixes#684
Previous code didn't get the viewmodel to check if the content had
changed, so `onBackPressedCallback` wasn't enabled, and the user could
edit the bio and press "back" without being prompted to save their
changes.
Edited polls only include the list of options with titles; no other
metadata (poll ID, single/multiple choice, vote counts, etc). Since the
data shape didn't match Moshi wasn't decoding the data.
Provide dedicated data classes to model the response, and add a fourth
poll display option to represent viewing an edit history snapshot.
Replace `ContextCompat.getDrawable()`, as the app-compat version has
platform fixes and backports.
appcompat-lint warns about bare `context.getDrawable()`, but does not
cover `ContextCompat` (https://issuetracker.google.com/issues/337905331)
`ListStatusAccessiblityDelegate` was ignoring notifications because it
was checking the status against the concrete `StatusViewData` and not
the interface `IStatusViewData`.
Fix that and now notifications have accessibility actions.
`ConversationsFragment` didn't set the accessibility delegate, so no
actions appeared. Fix that so they do.
Crash was occuring because the instance info hadn't been fetched, trying
to take the last item of an empty list.
To fix:
- Expose the instance info as a state flow, with a default. New instance
info is fetched whenever the active account changes.
- Do the same for the emojis supported by the server.
- Update call sites as appropriate.
- Mark `InstanceInfoRepository` as `@Singleton` so it isn't repeatedly
created causing fresh content fetches.
The tests needed updating to get this to work.
- Extract the network fake modules in to a network-test module so
multiple other modules can use them.
- Rewrite `InstanceInfoRepositoryTest` to use Hilt and use Turbine to
test the new flows.
Checking this showed cosmetic bugs in the About layout when instance
info is missing, clean those up.
The change in 5959d23d resulted in a stuck margin when scrolling up in
the account view.
Fix the `SwipeRefreshLayout` offset in a different way that doesn't have
that problem; move the spinner's start position to the top of the screen
(instead of the negative offset it normally has) and keep the same
relative offset from the end position.
Have it scale in on the drag to complete the effect.
Previous code used a single animation type (slide) when transitioning,
the transition was quite slow, and didn't behave appropriately if the
device was set to a RTL writing system.
In addition, handling the back affordance didn't work well with the new
"Predictive Back" feature in Android 14
(https://developer.android.com/guide/navigation/custom-back/predictive-back-gesture).
Fix this.
## Transitions
To update the transitions the `startActivityWithSlideInAnimation()`
implementation (and associated `finishWithoutSlideOutAnimation()`) have
been replaced.
There are three transitions; `default`, `slide`, and `explode`,
represented as an enum passed to the activity intent.
The `default` transition is the activity transition from Android 14,
from the Android open source project
(https://cs.android.com/android/platform/superproject/+/android-14.0.0_r18:frameworks/base/core/res/res/anim/;bpv=1).
This is used for most transitions.
The `slide` transition is the pre-existing slide transition, with a
shorter transition time so it feels more responsive, and an RTL
implementation. This is used when there is a strong spatial component to
the navigation, for example, when going from:
- a status to its thread
- a preference menu item to its subscreen
- a filter in a list to the "edit filter" screen
- viewing your profile to editing your profile
The `explode` transition is used when the state of the app changes
significantly, such as when switching accounts.
Activities are now started with `startActivityWithTransition()` which
sets the intent and prepares the transition. `BaseActivity` checks the
intent for the transition type and makes further changes to the
transition as necessary.
## Predictive back
"Predictive back" needs to know what the back button would do before the
user interacts with it with an `onBackPressedCallback` that is either
enabled or disabled. This required refactoring some code (particularly
in `ComposeActivity`) to gather data ahead of time and enable/disable
the callback appropriately.
## Fixed bugs
- Back button wasn't stepping back through the tabs in AccountActivity
- Modifying a filter and pressing back without saving wasn't prompting
the user to save the changes
- Writing a content warning and then hiding it would still count the
text of the content warning toward's the post's length
## Other cleanups
- Use `ViewCompat.setTransitionName()` instead of setting the
`transitionName` property
- Delete the unused `fade_in` and `fade_out` animations.
- Use androidx-activity 1.9.0 to get the latest predictive back support
library code
- Show validation errors when creating / editing filters
AccountActivity is full screen, so the swipe spinner was appearing very
close to the top system bar. Adjust the spinner's top margin to avoid
the system bar, and have it scale in/out so it doesn't appear to slide
out from an invisible barrier.
Previous code didn't trigger the transition from `ViewMediaActivity`
when playing a video until the video had loaded. If the connection was
slow or had other issues this resulted in the video "sticking" in the
timeline until it loaded.
Change this, and trigger the transition immediately.
Fixes#598
While looking at this:
- Save the play/pause state of the video during a swipe, pause the
video, and restore the state when the swipe is cancelled.
- Transition the entire video view, to improve the animated transition
back to the activity.
- Remove the custom progress spinner, use the one provided by the
player.
- Display the player controller via the layout XML instead of code
The previous code didn't set a limit for the number of posts, links, and
hashtags to fetch on the trending pages, so used the conservative
defaults.
Increase these to the API maximums to show the user more information.
The PageCache implementation wasn't properly dealing with timelines that
could return statuses in non-chronological order.
For example, if you bookmark a recent status, then go back in the
timeline and bookmark an older status; the bookmarks timeline is ordered
by the time of the bookmark event, not the creation time of the status
that was bookmarked.
If a sufficiently old status was bookmarked so it straddled a page
boundary you could have a situation where the range of status IDs in two
different cached pages overlapped.
E.g., this log extract:
```
0: k: 110912736679636090, prev: 3521487, next: 3057175, size: 40, range: 112219564107059218..110912736679636090
1: k: 111651744569170291, prev: 3049659, next: 2710596, size: 40, range: 111926741634665808..111651744569170291
```
The range of IDs in page 0 overlaps with the range of IDs in page 1.
The previous `PageCache` assumed this couldn't happen, and broke in
various interesting ways when it did.
E.g., you can't find the page that contains a given status by looking
for the largest key less than the needle's status id. Given the pages
above looking for ID 112219564107059218 (first status in page 0) would
suggest page 1 as having the greatest key less than that ID. This
manifested as the correct page briefly appearing in the UI (page 0),
then being completely replaced with page 1.
Rewrite PageCache to fix this. The previous implementation used a single
`TreeMap` assuming items were always sorted by ID. The new code keeps an
unordered map from status IDs to the page that contains that status, and
a separate `LinkedList` that contains the pages in order they're
provided by the API. This decouples the ordering of pages in the cache
with the overall ordering of items within the pages.
https://github.com/pachli/pachli-android/pull/589 changed the initial
setting of the action bar title to use `binding.mainToolbar.title`
instead of `supportActionBar?.title`.
Not sure why, but this doesn't work on first use, and was showing
"Pachli Current" until the user changes tabs. Swap one usage back to
`supportActionBar?.title` to fix this, and update the other to do the
same thing to keep the code consistent.
Use `unicodeWrap` when inserting placeholders in error messages so they
set the correct text direction.
Update some strings with formatting directives to (a) include `_fmt`
in the name, and (b) use `%1$s` instead of `%s`.
The compose button isn't initially working on `MainActivity`. It is only
properly setup after changing tabs.
Fix by calling `MainActivity.refreshComposeButtonState(TabViewData)` on
creation.
Previously, modifying any tabs meant opening the left-side nav, opening
Account preferences > Tabs, and then adding / removing tabs. This is
time consuming, and difficult for new users to discover.
In addition, it was possible to remove the Home tab, and there was a
hardcoded minimum of at least two tabs.
Fix this.
When viewing a timeline that is not already in a tab an "Add to tab"
menu item is enabled, which appends the timeline to the list of existing
tabs.
When viewing a timeline in a tab (that is not the Home timeline) a
"Remove tab" menu item is enabled, which removes the tab from the list
of existing tabs.
If the user removes the active tab (either with this menu item, or
through preferences) the tab to the left of the active tab becomes the
new active tab.
A new "Manage tabs" menu item is also provided, as a shortcut to the
existing Account preferences > Tabs screen.
When managing tabs the Home timeline can not be removed; the button to
remove it is removed, and swiping is disabled on that list item. The
restriction of "at least two tabs" has also been removed.
`NotificationsActivity` has been removed, as `TimelineActivity` can
display `NotificationsFragment`.
To make the three "Trending" types (hashtags, links, and posts) more
visually distinct add two new icons for links (ic_newspaper) and posts
(ic_whatshot).
Fixes#572, #584, #585, #569
Mastodon API uses an "empty" `expires_in` value for a filter to mean
"Does not expire" (i.e., indefinite).
This was modelled as a null. Which doesn't work, because Retrofit does
not send name/value pairs in encoded forms if the value is null.
Fix this by making the API type a `String?`, and explicitly using the
empty string when indefinite expiry is used. This has to be converted
back to an Int? in a few places.
See
https://github.com/mastodon/documentation/issues/1216#issuecomment-2030222940
Previous code was inconsistent about how and when the FAB was hidden if
the user had set the relevant preference.
- Sometimes the FAB has hidden by setting the visibility to false, which
removed it with no animation.
- Sometimes the value of the preference was checked once, when the
fragment or activity was created.
- Some timelines didn't show the FAB (Hashtags, Favourites, Bookmarks,
TrendingLinks, TrendingStatuses).
- Logic for figuring out which `ComposeActivity` intent to use was
scattered across different files.
Improve this by:
- Expose changes to the `FAB_HIDE` preference in the relevant viewmodels
as a flow the UI component can collect.
- Centralise the show/hide logic in a new `ActionButtonScrollListener`
class, and always using `show()`/`hide()` to animate the transition.
- Centralise the logic for creating the `ComposeActivity` intent in
`TabViewData`.
`TabData` recorded the type of the timeline the user had added to a tab.
`TimelineKind` is another type that records general information about
configured timelines, with identical properties.
There's no need for both, so remove `TabData` and use `TimelineKind` in
its place.
`TimelineKind` is itself mis-named; it's not just the timeline's kind
but also holds data necessary to display that timeline (e.g., the list
ID if it's a `.UserList`, or the hashtags if it's a `.Hashtags`) so
rename to `Timeline` to better reflect its usage. Move it to a new
`core.model` module.
Workaround a Glide bug where the error() handler is not always called,
in this case when the URL does not resolve to an image; for example, a
misconfigured server that redirects requests for the image to an HTML
page.
Catch the exception and use the default avatar image in these cases.
Previous code would handle some expected exceptions (IO, HTTP) when
fetching a timeline, and show them to the user. Any other exception
would crash.
Now, surface all exceptions. Treat IO and HTTP exceptions as retryable
and show the "Retry" option, all others are considered non-retryable.
Provide a specific error string for exceptions caused by bad JSON.
Previous code used custom regular expressions to extract URLs, hashtags,
and mentions from text while the user was writing a post. These were
inconsistent with the ones that Mastodon uses so the derived character
count could be wrong.
As well as being visually incorrect this could prevent the user from
posting a status that was within the length limit, or allow them to
attempt to post a status that was over the length limit (which would
then fail).
Fix this by dropping the homegrown regular expressions and using the
same text parsing library that Mastodon users; twitter-text. This has
been converted to Kotlin and the functionality related to Twitter
specific features has been removed.
The hashtag handling has been adjusted, as Mastodon is more permissive
about the positions where hashtags can appear than Twitter is, in
particular, a hashtag does not need to be preceded with whitespace if
the tag appears after some scripts, such as Hirigana.
The previous bottomsheets did set a minimum height for the menu items,
so they were less than the recommended 48dp minimum. Fix that to improve
the overall accessibility.
Always highlight the "visibilty" icon, to make it clear that it's
something that is set (even if to the default).
Show the visibility icon on the "Toot" button as an additional reminder
to the user.
Other changes:
- Use the "filled" style for all icons (the visibility icons had the
"outlined" style)
- Use the `makeIcon` helper function.
- Use the `Status.Visibility` extension functions to determine the icon
for each visibility type, reducing code duplication.
Show a labelled checkbox to the bottom-right of polls that the user has
not voted in and that have votes. If checked the current vote tally (as
percentages) will be shown, along with a bar showing the relative value
of each option.
Previous code expected callers to typically provide the drawable and the
error message string resource, resulting in duplicate code at many
callsites.
Replace with three canned messages for empty containers, generic errors,
and network errors respectively. The images for these are fixed, the
caller may choose a different string resource for the error if there is
a more specific option.
Update and simplify the call sites.
Move `ListsActivity`, along with fragments and viewmodels, to a new
`feature:lists` module.
Previous code used the `item_follow_request` layout, which was not
ideal, so update it to use a dedicated layout, `item_account_in_list`.
The UI uses strings and views originally defined in the main app, so
move them elsewhere so they can be re-used.
- `BackgroundMessageView` moves to `core.ui`.
- `Lazy` moves to `core.common`.
- `ThrowableExtensions` split; the extensions specific to throwables
from network activity move to `core.network`, others move to `core.ui`.
- `BindingHolder` moves to `core.ui`
- Shared drawables and strings move to `core.ui`.
For reasons not fully understood the root of a fragment's view might not
have relevant view from the activity set as its parent. This causes
`Snackbar.make()` to throw an exception, and crash.
See https://issuetracker.google.com/issues/228215869.
For now, "fix" this by swallowing the exception. Not showing the error
is better than crashing.
The replies policy controls whether replies from members of the list
also appear in the list.
Display the replies policy as three radio buttons when a list is created
or updated, and send the chosen replies policy via the API.
Default value if not specified is always "list", for consistency with
the Mastodon API defaults.
While I'm here:
- Ensure the list dialog layout is inflated using the dialog's themed
context
- Use a `TextInputLayout` wrapper around the list name in the list
dialog for better UX
- Simplify the dialog layout, use LinearLayout, and standard padding and
margins
Modify `ListsViewModel` to keep track of the number of active network
operations and export as a flow. Collect this in `ListsActivity` and
show a `LinearProgressIndicator` while it is non-zero.
Previous code would prune any cached media every time `MainActivity` was
created, causing extra IO just as the user is trying to use the app.
Re-implement as a WorkManager worker so it can run when the device is
idle, without interfering with the responsiveness of the device.
Previous code used a normal ProgressBar and a coroutine to delay
hiding/showing the bar for a snappier UI perception.
This is built-in functionality in LinearProgressIndicator, so switch to
that.
While I'm here, implement the "Select list" dialog's layout as a layout
resource.
If the user has tabs containing one or more lists, and any of those
lists are renamed or deleted then the change should be reflected in the
tabs.
To do that:
`MainActivity`:
- Re-create tabs whenever lists are loaded and there's a list in a tab
- Compare lists-in-tabs by the ID of the list when restoring the user's
tab, so that a list rename doesn't lose their position.
`NetworkListsRepository`:
- Update the user's tab preferences whenever lists are loaded, removing
tabs that contain lists that have been deleted, and updating the
list's title for lists that have been renamed.
Fixes#192
Previously to view a list the user either had to add it to a tab, or tap
through "Lists" in the navigation menu to their list of lists, and then
tap the list they want.
Fix that, and show all their lists in a dedicated section in the menu,
with a new "Manage lists" entry that's functionality identical to the
old "Lists" entry (i.e., it shows their lists and allows them to create,
delete, and edit list settings).
To do that:
- Implement a proper `ListsRepository` as the single source of truth for
list implementation throughout the app. Expose the current list of lists
as a flow, with methods to perform operations on the lists.
- Collect the `ListsRepository` flow in `MainActivity` and use that to
populate the menu and update it whenever the user's lists change.
- Rewrite the activities and fragments that manipulate lists to use
`ListRepository`.
- Always show error snackbars when list operations fail. In particular,
the HTTP code and error are always shown.
- Delete the custom `Either` implementation, it's no longer used.
- Add types for modelling API responses and errors, `ApiResponse` and
`ApiError` respectively. The response includes the headers as well as
the body, so it can replace the use of `NetworkResult` and `Response`.
The actual result of the operation is expected to be carried in a
`com.github.michaelbull.result.Result` type. Implement a Retrofit call
adapter for these types.
Unit tests for these borrow heavily from
https://github.com/connyduck/networkresult-calladapter
Additional user-visible changes:
- Add an accessible "Refresh" menu item to `ListsActivity`.
- Adding a list to a tab has a dialog with a "Manage lists" option.
Previously that would close the dialog when clicked, so the user had to
re-open it on returning from list management. Now the dialog stays open.
- The soft keyboard automatically opens when creating or editing a list.
Previous code showed a small icon for account media that the user has
hidden.
Now determine the correct size / aspect ratio for the media and use that
to compute the placeholder (either a blurhash, or the link colour for
consistency with the view on a timeline).
Fixes#513
Previous code showed the toolbar and caption when displaying the image,
and the user has to tap the screen to dismiss it.
New code is consistent with the video viewer; the toolbar and caption
is displayed for two seconds, and then auto-hides.
- Tapping after the hide displays the toolbar and caption, which will
not auto-hide and requires a second tap to dismiss.
- Tapping the caption before it's hidden cancels the auto-hide
Fixes#505
The account logout process could fail due to API exceptions; network
errors for example, or if the user had already revoked the app's token
for that account. This would prevent the rest of the logout process
(cleaning database, etc) from completing.
Fix this by ignoring network errors during the logout process, and
always cleaning up account content in the database.
Fix a related issue where a deleted account might be recreated in a
partial state if the account's visible position was saved after it was
deleted. The recreated account couldn't do anything as it had no tokens,
but is very confusing.
Previously the only way to access notifications was to dedicate a tab to
them. Now notifications are available from the left-side navigation menu
so they're always accessible.
Add them to the top of the list, and swap the order of bookmarks and
favourites, assuming that users are more likely to want to see their
bookmarks than their favourites.
Move "Edit profile" to the bottom with the other settings options,
assuming that editing their profile does not happen very often, so
should not be at the top of the list.
Previously a regular function that created and subscribed to an rxJava
callable, now it's a suspending function that enforces Dispatchers.IO as
the context, launched in its own coroutine.
Previously a regular function launched with an rxJava scheduler, now
it's a suspending function that enforces Dispatchers.IO as the context,
launched in its own coroutine.
Highlights:
- Implement fragment transitions for video to improve the UX, video
won't start playing until the transition completes
- Remove rxJava
- Move duplicate code in to base classes
Details:
`MediaActionsListener`:
- Move to `ViewMediaFragment` as it's used by both subclasses
- Remove need for separate `VideoActionsListener`
- Rename methods to better reflect their purpose and improve readability
`ViewMediaFragment`:
- Move duplicated code from `ViewImageFragment` and `ViewVideoFragment`
- Rewrite code that handles fragment transitions to use a
`CompleteableDeferred` instead of `BehaviorSubject` (removes rxJava).
- Rename methods and properties to better reflect their purpose and
improve readability
- Add extra comments
`ViewImageFragment`:
- Rewrite code that handles fragment transitions to use a
`CompleteableDeferred` instead of `BehaviorSubject` (removes rxJava).
`ViewVideoFragment`:
- Implement fragment transitions for video to improve the UX, video
won't start playing until the transition completes
- Manage toolbar visibility with a coroutine instead of a handler
- Add extra comments
`ViewMediaActivity`:
- Rename properties to better reflect their purpose and improve
readability
- Add extra comments
`ImagePagerAdapter`:
- Rename properties to better reflect their purpose and improve
readability
- Add extra comments
New lint rules highlighted a potential crash; the use of named match
groups (used here when extracting server versions) requires API >= 26 or
throws an exception.
Use the group numbers instead of names when extracting the value, but
keep the group names in the regular expressions for readability.
The previous code would share media by either:
a. If it was an image, downloading the image using Glide in to a bitmap,
then recompressing as a PNG, saving, and sharing the resulting file.
b. Otherwise, create a temporary file, enqueue a DownloadManager request
to download the media in to the file, and immediately start sharing,
hoping that the download had completed in time.
Both approaches have problems:
In the "image" case the image was being downloaded (or retrieved from
the Glide cache), decompressed to a bitmap, then recompressed as a PNG.
This uses more memory, and doesn't share the original contents of the
file. E.g., if the original file was a JPEG that's lost (and the PNG
might well be larger than the source image).
In the second case the DownloadManager download is not guaranteed to
have completed (or even started) before the user chooses the share
destination. The destination could receive a partial or even empty file.
Fix both of those cases by always fully downloading the file before
sending the share intent. This guarantees the file is available to
share, and in its original format. Since this uses the same OkHttpClient
as the rest of the app the content is highly likely to be in the OkHttp
cache, so there will no extra network traffic because of this.
The previous code used synchronous (i.e., non-suspending) functions to
call the /api/v2/search and /api/v2/accounts/search endpoints.
This is not necessary as the search was always performed in a separate
thread.
Remove, and replace their usage with the equivalent functions that
suspend.
Once desugaring is enabled it needs to be enabled for up/down the
dependency chain, so enable it in the shared configuration defined by
the build convention code.
Highlighted a failing test that wasn't being run, so fix that too.
A filter's context (previously referred to as its `kind`) controls where
the filter is applied.
This was implemented as an enum with a specific property to control how
it would serialise when @FormUrlEncoded, and with a @Json annotation for
Moshi.
In addition, the model objects kept the filter context in its string
form throughout Pachli, requiring periodic conversion to/from the enum
type, making the code more complicated.
Fix this, by:
1. Converting the incoming JSON value to the enum type immediately, so
the rest of the code uses the enum constants exclusively.
2. Implement a Retrofit converter that serialises the enum value when
@FormUrlEncoded to the same string used in JSON serialisation
Many servers that claim to be Mastodon-API compatible are not, as
evidenced by the content they include in the responses to
`/api/v1/instance` and `/api/v2/instance` requests.
Work around the worst of the breakage by providing defaults or marking
some fields as nullable (with a default null).
Bugs have been reported against the relevant projects.
The `highlighted` property on a role may be absent. If it is this breaks
account parsing, including accounts in an /api/v2/instance response.
This, in turn, breaks determining server capabilities, including whether
or not translation is supported.
Set the default to `true`, which matches observed Mastodon behaviour.
A user is reporting that a refresh is happening in the middle of loading
content, borne out by the existing logs.
Those logs don't say what has triggered the refresh attempt, so add
additional logging whenever a refresh can occur to record what triggered
it.
Previously media on the "Media" tab was displayed scaled and cropped to
a square aspect ratio, effectively forcing the user to tap every image
to see it.
Now, display the images scaled but not cropped, layed out with
`StaggeredGridLayoutManager`. This shows each image in full (still
scaled) providing a better experience when scrolling down.
Scrolling up can occasionally introduce gaps in the grid as images are
re-placed as viewholders are reused. When this happens images animate to
a better position when scrolling stops.
Previous code injected `ApplicationContext`, which is not themed, and
caused a crash if the "update" dialog was shown.
Fix by passing the necesssary context in explicitly when the check is
performed.
Previous code expected all incoming enums values to map directly to
Kotlin enum constants.
This is a problem for servers with additional features -- e.g.,
"reaction" as a notification type.
Fix this with a new Moshi adapter that will set the incoming value to a
given constant if it's not recognised.
Apply this to the enum constants in core.network to ensure they are
handled.
Clean up enum handling in Converters.kt, ComposeViewModel.kt, and
Status.kt by using the existing `.ordinal` property and some extension
functions for idiomatic code.
Fixes#461
Previous code showed a generic placeholder for audio media on the
account's "Media" tab.
Fix this so the preview image is shown (if it's available).
- Move the "is this attachment previewable?" code to `Attachment` so it
can be reused here.
- Restructure the logic in `AccountMediaGridAdapter` to use the new
`isPreviewable()` method when deciding whether to show a preview.
- Attachments have dedicated placeholder drawables, use those when the
preview is not available.
Add an additional preference entry that triggers an update when tapped.
It also displays the earliest time of the next automatic update check as
the preference summary.
Move the code that performs the update check (and the logic for whether
to perform the check) out of `MainActivity` and in to `UpdateCheck` so
it's available from `PreferencesFragment`.
If the user increases the font size the labels for post statistics
(number of replies, etc) can crash in to each other.
To give more space for the text:
- Shrink the label font size
- Move the labels slightly left / tighter to the icon
- Allow the "bookmark" icon to move next to the "more" icon. There's
still 48dp of space for them, and this gives a little more space to the
other icons that have labels
Friendica can return a null `voted_on` property, in violation of the API
spec.
Introduce a `BooleanIfNull` annotation that will convert the `null` to
`false` if encountered.
While I'm here update the other adapters as classes on their relevant
annotations instead of standalone classes to keep the code consistent.
Fixes#455
Some users report that Pachli is not retrieving/displaying notifications
in a timely fashion.
To assist in diagnosing these errors, provide an additional set of tabs
on the "About" screen that contain information about how Pachli is
fetching notifications, and if not, why not.
Allow the user to save notification related logs and other details to a
file that can be attached to an e-mail or bug report.
Recording data:
- Provide a `NotificationConfig` singleton with properties to record
different aspects of the notification configuration. Update these
properties as different notification actions occur.
- Store logs in a `LogEntryEntity` table. Log events of interest with a
new `Timber` `LogEntryTree` that is planted in all cases.
- Add `PruneLogEntryEntityWorker` to trim saved logs to the last 48
hours.
Display:
- Add a `NotificationFragment` to `AboutActivity`. It hosts two other
fragments in tabs to show details from `NotificationConfig` and the
relevant logs, as well as controls for interacting with them.
Bug fixes:
- Filter out notifications with a null tag when processing active
notifications, prevents an NPE crash
Other changes:
- Log more details when errors occur so the bug reports are more helpful
The previous code was using a bold version of the default font for
inserted text. So if the user had set a custom font it was being
ignored.
Fix this by creating a bold version of the user's typeface.
Fixes#435
The `x` and `y` properties in `Attachment.Focus` may be null (not
documented as such, but observed in the wild).
Provide a `DefaultIfNull` adapter that can be applied to these to
replace null values with a sensible default.
Content that doesn't start with a block element generates a parse error.
This isn't normally seen from Mastodon servers but is seen from content
from other servers (e.g,. Akkoma), which can generate:
```
<a href="..."> some text
```
instead of:
```
<p><a href="..."> some text</p>
```
Work around this by ensuring that content-to-be-diffed is wrapped in a
`div`.
The previous code didn't clear the task stack or recreate `MainActivity`
when the active user was changed.
So if the user was logged in with account A and used "Compose" from a
notification sent to account B, the active account was switched to B but
the UI chrome wasn't. After exiting `ComposeActivity` they would be
looking at the timeline for account B but with a toolbar that showed
account A.
Fix this by clearing the task stack and explicitly recreating
`MainActivity` when forwarding intents to `ComposeActivity`.
Shortcuts were being updated using `MainActivity.this` as the `Context`
and leaking in `ShortcutManagerCompat`. Use the application context to
fix this.
When the `Notification.Type` enum was moved to a separate module it
resulted in exceptions trying to deserialize the enum:
```
java.lang.RuntimeException: Parcelable encountered ClassNotFoundException reading a Serializable object (name = app.pachli.core.network.model.Notification$Type)
```
This happened in debug builds without Proguard, so not a minification or
renaming issue.
Fix this by providing `putEnum`/`getEnum` extension functions on
`Bundle` that store the enum's ordinal value and restore it from that.
UnifiedPush broadcasts are used to trigger fetching new notifications.
Previously this was a normal one-time work request. Mark it as expedited
to increase the likelihood it will run soon.
- Use format strings so any overhead of building the string is only
incurred if the message is actually logged
- Pass throwables as the first parameter so they are logged with the
stacktrace
Moshi is faster to decode JSON at runtime, is actively maintained, has a
smaller memory and method footprint, and a slightly smaller APK size.
Moshi also correctly creates default constructor arguments instead of
leaving them null, which was a source of `NullPointerExceptions` when
using Gson.
The conversion broadly consisted of:
- Adding `@JsonClass(generateAdapter = true)` to data classes that
marshall to/from JSON.
- Replacing `@SerializedName(value = ...)` with `@Json(name = ...)`.
- Replacing Gson instances with Moshi in Retrofit, Hilt, and tests.
- Using Moshi adapters to marshall to/from JSON instead of Gson `toJson`
/ `fromJson`.
- Deleting `Rfc3339DateJsonAdapter` and related code, and using the
equivalent adapter bundled with Moshi.
- Rewriting `GuardedBooleanAdapter` as a more generic `GuardedAdapter`.
- Deleting unused ProGuard rules; Moshi generates adapters using code
generation, not runtime reflection.
The conversion surfaced some bugs which have been fixed.
- Not all audio attachments have attachment size metadata. Don't show
the attachment preview if the metadata is missing.
- Some `throwable` were not being logged correctly.
- The wrong type was being used when parsing the response when sending a
scheduled status.
- Exceptions other than `HttpException` or `IoException` would also
cause a status to be resent. If there's a JSON error parsing a response
the status would be repeatedly sent.
- In tests strings containing error responses were not valid JSON.
- Workaround Mastodon a bug and ensure `filter.keywords` is populated,
https://github.com/mastodon/mastodon/issues/29142
Previously, `AboutActivity` had buttons and links to show the privacy
policy and licenses of dependencies.
Change this to a selection of fragments in tabs, one tab each for:
- General "About" information
- Licenses
- Privacy Policy
The information shown hasn't changed, but this lays the groundwork for
including additional tabs in the future for information like server
rules, detected capabilities, or troubleshooting information.
Release builds normally strip out all logging to reduce the number of
disk writes and reduce UI jank.
These logs would still be useful in user error reports from orange
builds. To preseve them:
- Implement a simple `RingBuffer`.
- Create `TreeRing`, a `Timber` `Tree` logger that logs to a
`RingBuffer` instance in orange release builds.
- Create `TreeRingCollector`, called when ACRA reports are generated,
which includes the contents of the ring buffer in the report.
- Enable desugaring to allow the use of java.time libraries on older
Android versions.
- Disable ProGuard obfuscation of class names as the obfuscation adds
additional de-obfuscation steps when handling error reports from users.
Getting error reports with logs of strange behaviour is useful even if
the app doesn't crash.
Move crash reporting in to `core.activity`, and provide a menu option
(in orange builds) to trigger a non-fatal crash report that is handled
the same way (i.e., sent by e-mail) as a regular crash report.
`BaseActivity` has to be able to create and handle menus, so adjust
subclasses to call the superclass when necessary.
Update `tools/mvstring` to be able to move strings between different
flavour directories, not just `main`.
Continue modularisation by moving activities in the "About" feature to a
new `feature.about` module.
Implement `feature.about:
- Move `AboutActivity`, `LicenseActivity`, and `PrivacyPolicyActivity`
here.
- Update `markdown2resource` plugin to work with libraries
Implement `core.data`:
- Types and repositories used through the app
- Move `InstanceInfo` and `InstanceInfoRepository` here so they are
available to `feature.about`.
Implement `core.ui`:
- App-specific views, spans, and other UI content
- Move `ClickableSpanTextView` and `NoUnderlineURLSpan` here so they are
available to `feature.about`.
Continue modularisation by moving core activity classes that almost all
activities depende on to a `core.activity` module. This includes
core "helper" classes as well.
Implement core.activity:
- Contains BaseActivity, BottomSheetActivity
- Contains LinkHelper and other utility classes used by activities
Implement core.common.extensions:
- Move ViewBindingExtensions and ViewExtensions here
Implement core.common.util:
- Move BlurHashDecoder and VersionName here
Implement core.designsystem:
- Holds common resources (animations, colours, drawables, etc) used
through the app
- Import "core.designsystem.R as DR" through the app to distinguish
from the module's own resources
Implement feature.login:
- Move the LoginActivity and related code/resources to its own module
Implement tools/mvstring
- Moves string resources (and all translations) from one module to
another
Previous code would show errors when fetching server info but with no
mechanism to retry the operation, so it would "stick" until the user
restarted the app.
Fix this with a retry action.
While I'm here use styles to ensure that all snackbars are 5 lines max
length and remove code that sets the length.
Previously when the user interacted with a status the operation (reblog,
favourite, etc) travels through multiple layers of code, carrying with
it the position of the item in the list that the user operated on.
At some point the status is retrieved from the list using its position
so that the correct status ID can be used in the network operation.
If this happens while the list is also refreshing there's a possible
race condition, and the original status' position may have changed in
the list. Looking up the status by position to determine which status to
perform the action on may cause the action to happen on the wrong
status.
Fix this by passing the status' viewdata to any actions instead of its
position. This includes all the information necessary to make the API
call, so there is no chance of a race.
This is quite an involved change because there are three types of
viewdata:
- `StatusViewData`, used for regular timelines
- `NotificationViewData`, used for notifications, may wrap a status that
can be operated on
- `ConversationViewData`, used for conversations, does wrap a status
The previous code treated them all differently, which is probably why it
operated by position instead of type.
The high level fix is to:
1. Create an interface, `IStatusViewData`, that contains the data
exposed by any viewdata that contains a status.
2. Implement the interface in `StatusViewData`, `NotificationViewData`,
and `ConversationViewData`.
3. Change the code that operates on viewdata (`SFragment`,
`StatusActionListener`, etc) to be generic over anything that implements
`IStatusViewData`.
4. Change the code that handles actions to pass the viewdata instead of
the position.
Fixes#370
Previous code created the drawer image loader as an anonymous inner
class that kept a reference to `glide`, which had a reference to `this`
and could leak.
Fix that by create a separate class that takes these as constructor
parameters.
The previous code incorrectly showed the trending tag usage data twice
next to the end of the trending tag lines, instead of one entry for the
usage data and one entry for the account data.
Fix that.
As part of this fix change how the data is displayed. Instead of using
two distinct `TextView`, fixed to the bottom end of the chart, draw the
text directly on the chart. The text is accurately position so that it
is next to the end of the relevant line. If both lines overlap the label
positions are adjusted appropriately.
The chart now uses Pachli blue and orange for the line colours.
While doing this I discovered that the mechanism used to fall back to
particular chart colours if none were specified was incorrect, so fix
that too.
Previous code could return an error on Friendica version strings like
`2024.03-dev-1547`.
Fix this:
- Extend the list of explicitly supported servers to include Fedibird,
Friendica, Glitch, Hometown, Iceshrimp, Pixelfed, and Sharkey.
- Add version parsing routines for these servers.
- Test the version parsing routines fetching every server and version
seen by Fediverse Observer (~ 2,000 servers) and ensuring that the
server and version information can be parsed.
Improve the error message:
- Show the hostname with a `ServerRepository` error
Clean up the code:
- Remove the custom `resultOf` and `mapResult` functions, they have
equivalents in newer versions of the library (like `runSuspendCatching`)
Fixes#372
The previous code unilaterally enabled filter functionality. Some
Mastodon-like servers -- like GoToSocial -- do not support filters, and
this resulted in user visible error messages when connecting to those
servers.
To fix this:
- Extend the set of supported server capabilities to include client and
server side filtering.
- Disable the filter preferences if the server does not support filters
and show a message explaining why it's disabled.
Extend the capabilities model to support this:
- Fetch server software name and version from the nodeinfo endpoints
(implementing the nodeinfo API and schema)
- Extend the use of kotlin-result to provide hierarchies of Error
classes and demonstrate how to chain errors and display more informative
messages without using exceptions.
Fixes#343
Previously some tests had to manually create dependencies (instead of
injecting them) because the dependency required the `TestScope`
`CoroutineScope` as one of its dependencies.
Resolve this with a `FakeCoroutineScopeModule` that provides `TestScope`
as `@ApplicationScope`. The tests can now inject their dependencies,
which will use `TestScope`.
To inject `AccountPreferenceDataStore` it has been updated to use the
current active account when reading or writing preferences.
e35fa1db inadvertently contained some left over debug code that treats
non-bot accounts as bots (for displaying the bot badge) and vice versa.
Fixes#321
If a status was part of a thread, and it was not the "detailed" status,
and it had been translated, then the view data was marked as "show the
translation". But the translation was not loaded, so the status content
appeared as empty.
Fix that by loading the translated content of all statuses in the thead
and ensure that the translated content is rendered.
Throw an `IllegalStateException` in debug builds to catch any future
occurrences of this.
Fixes#281
Add a dependency on ACRA (in orange builds only), and catch crashes.
The user is given the option to e-mail the crash report data to the
support address, and can view and edit/redact the data before doing so.
Mastodon counts post lengths by considering emojis to be single
characters, no matter how many unicode code points they are composed of.
So "😜" has length 1.
Pachli was using `String.length`, which considers "😜" as length 2.
Correct the calculation by using a BreakIterator to count the characters
in the string, which treats multi-character emojis as a length 1.
Poll options had a similar problem, exacerbated by the Mastodon web UI
also having the same problem, see
https://github.com/mastodon/mastodon/issues/28336.
Fix that by creating `MastodonLengthFilter`, an `InputFilter` that does
the right thing for regular text that may contain emojis.
See also https://github.com/tuskyapp/Tusky/pull/4152, which has the fix
for status length but not polls.
---------
Co-authored-by: Konrad Pozniak <opensource@connyduck.at>
Roles for the logged in user appeared in Mastodon 4.0.0 and can be
displayed on the user's profile screen.
Show them as chips, adjusting the display of the existing "Follows you"
and "Bot" indicators to make allowances for this.
Roles can have a custom colour assigned by the server admin. This is
blended with the app colour so it is not too jarring in the display.
See also https://github.com/tuskyapp/Tusky/pull/4029
Co-authored-by: Konrad Pozniak <opensource@connyduck.at>
Quoting @connyduck in https://github.com/tuskyapp/Tusky/pull/4150:
"""
The transformation ends up in Glide's memory cache and leaks whole
Activities through the view -> context reference.
This fixes the problem by removing the background detection logic (so
the view reference is no longer needed) and setting the background
directly instead. Looks exactly as before.
"""
Co-authored-by: Konrad Pozniak <opensource@connyduck.at>
The previous code generally started an activity by having the activity
provide a method in a companion object that returns the relevant intent,
possibly taking additional parameters that will be included in the
intent as extras.
E.g., if A wants to start B, B provides the method that returns the
intent that starts B.
This introduces a dependency between A and B.
This is worse if B also wants to start A.
For example, if A is `StatusListActivity` and B is`ViewThreadActivity`.
The user might click a status in `StatusListActivity` to view the
thread, starting `ViewThreadActivity`. But from the thread they might
click a hashtag to view the list of statuses with that hashtag. Now
`StatusListActivity` and `ViewThreadActivity` have a circular
dependency.
Even if that doesn't happen the dependency means that any changes to B
will trigger a rebuild of A, even if the changes to B are not relevant.
Break this dependency by adding a `:core:navigation` module with an
`app.pachli.core.navigation` package that contains `Intent` subclasses
that should be used instead. The `quadrant` plugin is used to generate
constants that can be used to launch activities by name instead of by
class, breaking the dependency chain.
The plugin uses the `Activity` names from the manifest, so when an
activity is moved in the future the constant will automatically update
to reflect the new package name.
If the activity's intent requires specific extras those are passed via
the constructor, with companion object methods to extract them from the
intent.
Using the intent classes from this package is enforced by a lint
`IntentDetector` which will warn if any intents are created using a
class literal.
See #291
The package wasn't renamed when it was moved, so was still
`app.pachli.components.timeline`, instead of the new location,
`app.pachli.core.network.model`.
The existing code base is a single monolithic module. This is relatively
simple to configure, but many of the tasks to compile the module and
produce the final app have to run in series.
This is unnecessarily slow.
This change starts to split the code in to multiple modules, which are:
- :core:account - AccountManager, to break a dependency cycle
- :core:common - low level types or utilities used in many other modules
- :core:database - database types, DAOs, and DI infrastructure
- :core:network - network types, API definitions, and DI infrastructure
- :core:preferences - shared preferences definitions and DI
infrastructure
- :core:testing - fakes and rules used across different modules
Benchmarking with gradle-profiler shows a ~ 17% reduction in incremental
build times after an ABI change. That will improve further as more code
is moved to modules.
The rough mechanics of the changes are:
- Create the modules, and move existing files in to them. This causes a
lot of churn in import arguments.
- Convert build.gradle files to build.gradle.kts
- Separate out the data required to display a tab (`TabViewData`) from
the data required to configure a tab (`TabData`) to avoid circular
dependencies.
- Abstract the repeated build logic shared between the modules in to
a set of plugins under `build-logic/`, to simplify configuration of
the application and library builds.
- Be explicit that some nullable types are non-null at time of use.
Nullable properties in types imported from modules generally can't be
smart cast to non-null. There's a detailed discussion of why this
restriction exists at
https://discuss.kotlinlang.org/t/what-is-the-reason-behind-smart-cast-being-impossible-to-perform-when-referenced-class-is-in-another-module/2201.
The changes highlight design problems with the current code, including:
- The main application code is too tightly coupled to the network types
- Too many values are declared unnecessarily nullable
- Dependency cycles between code that make modularisation difficult
Future changes will add more modules.
See #291.
Previous code always called `startActivityAndCollapse()` with a regular
intent, which triggers an `UnsupportedOperationException` at API 34.
Use the non-deprecated variant that uses pending intents when
appropriate.
While looking at this I noticed the icon for the tile was incorrect, so
replaced that with the notification icon.
Nik Clayton
Miles Krell
Miles Krell
Black_Eyes
Kalle Kniivilä
Weblate (bot)
Angelo Suzuki
Juan M Sevilla
Martijn de Boer
Reza Almanda
ButterflyOfFire
bittin1ddc447d824349b2
Weblate (bot)
Jener Gomes
sanao
renovate[bot]
sköldpadda
sanao
