* config/tc-i386.c (md_begin): Allow hyphens in mnemonics.
include/opcode/ChangeLog:
* i386.h: Insert hyphens into selected VIA PadLock extensions.
Add xcrypt-ctr. Provide aliases without hyphens.
opcodes/ChangeLog:
* i386-dis.c: Insert hyphens into selected VIA PadLock extensions.
Add xcrypt-ctr.
* i386.h (i386_optab): Mark VIA PadLock instructions as ImmExt and
adjust them accordingly.
gas/ChangeLog:
* config/tc-i386.c (output_insn): Handle VIA PadLock instructions
similar to other instructions now that they're marked as ImmExt.
2005-03-29 H.J. Lu <hongjiu.lu@intel.com>
* gas/i386/i386.exp: Run segment and inval-seg for i386. Run
x86-64-segment and x86-64-inval-seg for x86-64.
* gas/i386/intel.d: Expect movw for moving between memory and
segment register.
* gas/i386/naked.d: Likewise.
* gas/i386/opcode.d: Likewise.
* gas/i386/x86-64-opcode.d: Likewise.
* gas/i386/opcode.s: Use movw for moving between memory and
segment register.
* gas/i386/x86-64-opcode.s: Likewise.
* : Likewise.
* gas/i386/inval-seg.l: New.
* gas/i386/inval-seg.s: New.
* gas/i386/segment.l: New.
* gas/i386/segment.s: New.
* gas/i386/x86-64-inval-seg.l: New.
* gas/i386/x86-64-inval-seg.s: New.
* gas/i386/x86-64-segment.l: New.
* gas/i386/x86-64-segment.s: New.
include/opcode/
2005-03-29 H.J. Lu <hongjiu.lu@intel.com>
* i386.h (i386_optab): Don't allow the `l' suffix for moving
moving between memory and segment register. Allow movq for
moving between general-purpose register and segment register.
opcodes/
2005-03-29 H.J. Lu <hongjiu.lu@intel.com>
* i386-dis.c (SEG_Fixup): New.
(Sv): New.
(dis386): Use "Sv" for 0x8c and 0x8e.
2005-02-09 Jan Beulich <jbeulich@novell.com>
* gas/i386/intelok.s: Remove comments disabling alternative forms of
fbld, fbstp, and fldcw.
* gas/i386/intelok.d: Expect two instances of fbld, fbstp, and fldcw.
include/opcode/
2005-02-09 Jan Beulich <jbeulich@novell.com>
PR gas/707
* i386.h (i386_optab): Add x_Suf to fbld and fbstp. Add w_Suf and
FloatMF to fldcw, fstcw, fnstcw, and the memory formas of fstsw and
fnstsw.
* mips.h (struct mips_opcode): Add new pinfo2 member.
(INSN_ALIAS): New define for opcode table entries that are
specific instances of another entry, such as 'move' for an 'or'
with a zero operand.
(INSN_READ_MDMX_ACC): Redefine from 0 to 0x2.
(INSN_WRITE_MDMX_ACC): Redefine from 0 to 0x4.
2004-11-25 Jan Beulich <jbeulich@novell.com>
* config/tc-i386.c (optimize_imm): Adjust immediates to only those
permissible for the selected instruction suffix.
(process_suffix): For DefaultSize instructions, suppressing the
guessing of a 'q' suffix if the instruction doesn't support it is
pointless, because only an 'l' suffix can be guessed in this place.
gas/testsuite/
2004-11-25 Jan Beulich <jbeulich@novell.com>
* gas/i386/x86-64-inval.[sl]: Remove sahf/lahf.
include/opcode/
2004-11-25 Jan Beulich <jbeulich@novell.com>
* i386.h: CpuNo64 mov can't reasonably have a 'q' suffix. Moves
to/from test registers are illegal in 64-bit mode. Add missing
NoRex64 to sidt. fxsave/fxrstor now allow for a 'q' suffix
(previously one had to explicitly encode a rex64 prefix). Re-enable
lahf/sahf in 64-bit mode as at least some Athlon64/Opteron steppings
support it there. Add cmpxchg16b as per Intel's 64-bit documentation.
2004-11-23 Jan Beulich <jbeulich@novell.com>
* config/tc-i386.h (CpuMMX2): Declare. Artificial classifier to
indicate the MMX extensions added by both SSE and 3DNow!A.
(Cpu3dnowA): Declare.
(CpuUnknownFlags): Update.
* config/tc-i386.c (cpu_sub_arch_name): Declare.
(cpu_arch): i586 and pentium do not imply MMX. i686 and pentiumpro do
neither imply SSE nor MMX. k6 implies MMX. k6_2 additionally implies
3DNow!. Athlon additionally implies 3DNow!A. Several new
entries (those starting with a dot are for sub-arch specification).
(set_cpu_arch): Handle sub-arch specifications.
(parse_insn): Distinguish between instructions not supported because
of insufficient CPU features and because of 64-bit mode.
* doc/c-i386.texi: Describe enhanced .arch directive.
include/opcode/
2004-11-23 Jan Beulich <jbeulich@novell.com>
* i386.h (i386_optab): paddq and psubq, even in their MMX form, are
available only with SSE2. Change the MMX additions introduced by SSE
and 3DNow!A to CpuMMX2 (rather than CpuMMX). Indicate the 3DNow!A
instructions by their now designated identifier (since combining i686
and 3DNow! does not really imply 3DNow!A).
comments. Remove member cris_ver_sim. Add members
cris_ver_sim_v0_10, cris_ver_v0_10, cris_ver_v3_10,
cris_ver_v8_10, cris_ver_v10, cris_ver_v10p.
(struct cris_support_reg, struct cris_cond15): New types.
(cris_conds15): Declare.
(JUMP_PC_INCR_OPCODE_V32, BA_DWORD_OPCODE, NOP_OPCODE_COMMON)
(NOP_OPCODE_ZBITS_COMMON, LAPC_DWORD_OPCODE, LAPC_DWORD_Z_BITS)
(NOP_OPCODE_V32, NOP_Z_BITS_V32): New macros.
(NOP_Z_BITS): Define in terms of NOP_OPCODE.
(cris_imm_oprnd_size_type): New members SIZE_FIELD_SIGNED and
SIZE_FIELD_UNSIGNED.
2004-11-04 Jan Beulich <jbeulich@novell.com>
* config/tc-i386.c (set_intel_syntax): Allow % in symbol names when
intel syntax and no register prefix, allow $ in symbol names when
intel syntax.
(set_16bit_gcc_code_flag): Replace literal 'l' by LONG_MNEM_SUFFIX.
(intel_float_operand): Add fourth return value indicating math control
operations. Make classification more precise.
(md_assemble): Complain if memory operand of mov[sz]x has no size
specified.
(parse_insn): Translate word operands to floating point instructions
operating on integers as well as control instructions to short ones
as expected by AT&T syntax. Translate 'd' suffix to short one only for
floating point instructions operating on non-integer operands.
(match_template): Remove fldcw special case. Adjust q-suffix handling
to permit it on fild/fistp/fisttp in AT&T mode.
(process_suffix): Don't guess DefaultSize insns' suffix from
stackop_size for certain floating point control instructions. Guess
suffix for branch and [ls][gi]dt based on flag_code. Split error
messages for Intel and AT&T syntax, and make the condition more strict
for the former. Adjust suppressing of generation of operand size
overrides.
(intel parser): Allow the full set of MASM operators. Add FWORD, TBYTE,
OWORD, and XMMWORD operand size specifiers (TBYTE replaces XWORD). Add
more error checking.
* config/tc-i386.h (BYTE_PTR WORD_PTR DWORD_PTR QWORD_PTR XWORD_PTR
SHORT OFFSET_FLAT FLAT NONE_FOUND): Remove unused defines.
gas/testsuite/
2004-11-04 Jan Beulich <jbeulich@novell.com>
* gas/i386/i386.exp: Execute new tests intelbad and intelok.
* gas/i386/intelbad.[sl]: New test to check for various things not
permitted in Intel mode.
* gas/i386/intel.d, gas/i386/opcode.d, gas/i386/x86-64-opcode.d:
Adjust for change to segment register store.
* gas/i386/intelok.[sd]: New test to check various Intel mode specific
things get handled correctly.
* gas/i386/x86_64.[sd]: Remove unsupported constructs referring to
'high' and 'low' parts of an operand, which the parser previously
accepted while neither telling that it's not supported nor that it
ignored the remainder of the line following these supposed keywords.
include/opcode/
2004-11-04 Jan Beulich <jbeulich@novell.com>
* i386.h (sldx_Suf): Remove.
(FP, l_FP, sl_FP, x_FP): Don't imply IgnoreSize.
(q_FP): Define, implying no REX64.
(x_FP, sl_FP): Imply FloatMF.
(i386_optab): Split reg and mem forms of moving from segment registers
so that the memory forms can ignore the 16-/32-bit operand size
distinction. Adjust a few others for Intel mode. Remove *FP uses from
all non-floating-point instructions. Unite 32- and 64-bit forms of
movsx, movzx, and movd. Adjust floating point operations for the above
changes to the *FP macros. Add DefaultSize to floating point control
insns operating on larger memory ranges. Remove left over comments
hinting at certain insns being Intel-syntax ones where the ones
actually meant are already gone.
opcodes/
2004-11-04 Jan Beulich <jbeulich@novell.com>
* i386-dis.c (Eq, Edqw, indirEp, Gdq, I1): Define.
(indirEb): Remove.
(Mp): Use f_mode rather than none at all.
(t_mode, dq_mode, dqw_mode, f_mode, const_1_mode): Define. t_mode
replaces what previously was x_mode; x_mode now means 128-bit SSE
operands.
(dis386): Make far jumps and calls have an 'l' prefix only in AT&T
mode. movmskpX's, pextrw's, and pmovmskb's first operands are Gdq.
pinsrw's second operand is Edqw.
(grps): 1-bit shifts' and rotates' second operands are I1. cmpxchg8b's
operand is Eq. movntq's and movntdq's first operands are EM. s[gi]dt,
fldenv, frstor, fsave, fstenv all should also have suffixes in Intel
mode when an operand size override is present or always suffixing.
More instructions will need to be added to this group.
(putop): Handle new macro chars 'C' (short/long suffix selector),
'I' (Intel mode override for following macro char), and 'J' (for
adding the 'l' prefix to far branches in AT&T mode). When an
alternative was specified in the template, honor macro character when
specified for Intel mode.
(OP_E): Handle new *_mode values. Correct pointer specifications for
memory operands. Consolidate output of index register.
(OP_G): Handle new *_mode values.
(OP_I): Handle const_1_mode.
(OP_ESreg, OP_DSreg): Generate pointer specifications. Indicate
respective opcode prefix bits have been consumed.
(OP_EM, OP_EX): Provide some default handling for generating pointer
specifications.
* i386.h (i386_optab): Remove fildd, fistpd and fisttpd.
opcodes/
* i386-dis.c (x_mode): Comment.
(two_source_ops): File scope.
(float_mem): Correct fisttpll and fistpll.
(float_mem_mode): New table.
(dofloat): Use it.
(OP_E): Correct intel mode PTR output.
(ptr_reg): Use open_char and close_char.
(PNI_Fixup): Handle possible suffix on sidt. Use op1out etc. for
operands. Set two_source_ops.
gas/testsuite/
* gas/i386/prescott.s: Remove fisttpd and fisttpq.
* gas/i386/prescott.d: Update.
(INVLPG_Fixup): New function.
(PNI_Fixup): Remove ATTRIBUTE_UNUSED from sizeflag.
* opcode/i386.h (i386_optab): Remove CpuNo64 from sysenter and
sysexit.
