* exceptions.cc (sigpacket::process): Eliminate return after call to reinstated
noreturn function.
(signal_exit): Allow function to exit when a captive process has been
terminated.
* pinfo.cc (pinfo::exit): Enter exit_lock here. Once again exit here under
control of exit_lock.
* sigproc.cc (sig_send): Don't wait for completion if process is exiting.
Remove special __SIGEXIT accommodations.
(wait_sig): Just exit the thread when a __SIGEXIT has been detected. Don't
exit the process.
* sigproc.h (struct sipacket::thread_handle): Put thread_handle here.
* sigproc.cc (sigproc_terminate): Move setting of thread_handle...
(sig_send): ...to here. Put it in packet being sent. Only close pack.wakeup
when we're waiting for completion.
(wait_sig): Use thread_handle directly from received packet.
* cygtls.h (struct _cygtls::thread_handle): New field.
* dcrt0.cc (exit_lock): Remove declaration.
* winsup.h (exit_lock): Add declaration.
* exceptions.cc (sigpacket::process): Properly return after signal_exit.
* pinfo.cc (pinfo::exit): Only exit the process if _my_tls.thread_handle has
not been filled out -- which should be an impossible event.
* sigproc.cc (sigproc_terminate): Fillout _my_tls.thread_handle to provide
something for wait_sig to wait for. Use the siginfo_t version of sig_send and
fill out the tls argument with _my_tls.
(wait_sig): Wait for the thread specified in pack.tls or (for now) complain
bitterly if it doesn't exit.
pinfo::exit.
* pinfo.cc (pinfo::exit): Move sigproc_terminate later so that signals can be
processed while waiting for hExeced child.
(pinfo::maybe_set_exit_code_from_windows): Set exit code from sigExeced if it
is non-zero. Set exit_state to ES_EXEC_EXIT prior to waiting for captive
process exit code.
* exceptions.cc (sigExeced): New global variable.
(signal_exit): Remove noreturn attribute from declaration.
(signal_exit): Just terminate captive process and return if hExeced on the
theory that the exit will be subsequently handled in the main thread.
* sigproc.cc (sigproc_terminate): Eliminate test for ES_SIGPROCTERMINATE and
use ES_FINAL instead.
(sig_send): Use no_signals_available instead of duplicate test.
* winsup.h (ES_EXEC_EXIT): New enum.
(ES_SIGPROCTERMINATE): Delete.
(EXITCODE_NOSET): Ditto.
* sigproc.cc (no_signals_available): Remove check for hwait_sig. Just rely on
my_sendsig. Pass in an argument controlling when it is appropriate to test
EXITCODE_SET.
(proc_can_be_signalled): Remove checks for myself since this function is never
called in that context.
(sigproc_init): Pre-initialize my_sendsig to non-zero so that
proc_can_be_signalled will know that we expect to be signalable soon.
(sig_send): Change debugging output.
signal thread.
(wait_sig): Correct so that WaitForSingleObject is called when hMainThread is
!= 0, rather than the reverse.
* cygheap.cc (cygheap_fixup_in_child): Clarify potential error message.
* fork.cc (fork_copy): Cosmetic change.
called, since that is the intent of sending a __SIGEXIT. Wait forever for main
thread to go away since, presumably, the main thread told us it was going away.
(handle_exceptions): Use _sig_tls rather than sigtid to determine if this is
the signal thread.
(set_signal_mask): Ditto for conditionalized CGF code.
* pinfo.cc (pinfo::exit): Exit the thread if we forcefully terminated the main
thread
* sigproc.cc (sigtid): Delete.
(_sig_tls): Define.
(sig_clear): Use _sig_tls rather than sigtid to determine if this is the signal
thread.
(sig_dispatch_pending): Ditto.
(wait_sig): Set _sig_tls here.
* dcrt0.cc (do_exit): Move sigproc_terminate call later since signal handling
was still needed for subsequent stuff. Call sigproc_terminate with new
exit_state value.
* pinfo.cc (pinfo::exit): Call sigproc_terminate with new exit_state value.
* sigproc.cc (proc_terminate): Remove unnecessary (void) parameter.
(sigproc_terminate): Ditto. Add new argument to accept exit state to be set.
(wait_sig): Reorganize __SIGEXIT handling. Add more debugging output.
* winsup.h (sigproc_terminate): Declare with new exit_state argument.
(exit_states): Reorganize to reflect new exit ordering of sigproc_terminate.
appropriately.
* pinfo.cc (pinfo::exit): Always call sigproc_terminate here. Rely on
sigproc_terminate to signal signal thread to handle eventual process exit.
* sigproc.cc (no_signals_available): Change criteria for determining if this
process can handle signals to itself.
(my_sendsig): New variable. Copy of my sendsig handle.
(proc_can_be_signalled): Don't send signals if exit code is set.
(sigproc_terminate): Use and set exit_state appropriately to determine when to
do anything. Send __SIGEXIT to self to control process exit.
(sig_send): Use my_sendsig for sending signals. Don't call
proc_can_be_signalled for myself since the criteria is now different for
sending signals to myself.
(wait_sig): Copy myself->sendsig to my_sendsig for future use. Exit signal
loop when __SIGEXIT is received. Wait for main thread to exit and use its exit
status to actually exit process.
* sigproc.h (__SIGEXIT): New enum.
* dcrt0.cc (alloc_stack): Eliminate superfluous "return;".
* debug.cc (add_handle): Ditto.
* devices.in (device::parse): Ditto.
* dtable.cc (dtable::vfork_parent_restore): Ditto.
(dtable::vfork_child_fixup): Ditto.
* environ.cc (parse_options): Ditto.
* errno.cc (seterrno_from_win_error): Ditto.
* exceptions.cc (sig_handle_tty_stop): Ditto.
(set_signal_mask): Ditto.
* fhandler.cc (fhandler_base::read): Ditto.
(fhandler_base::operator delete): Ditto.
(fhandler_base::seekdir): Ditto.
(fhandler_base::rewinddir): Ditto.
* fhandler_console.cc (fhandler_console::read): Ditto.
(fhandler_console::fixup_after_exec): Ditto.
* sigproc.cc (sigproc_init): Ditto.
(sigproc_terminate): Ditto.
* devices.cc: Regenerate.
thread.
(sigpacket:process): Simplify logic which determines when and how a signal is
masked. Don't trigger sigwait if there is a signal handler.
* sigproc.cc (wait_sig): Update comment. Try to process a signal which is in
the queue if it isn't queued for the target thread (this is still not right).
(child_info::child_info): Accept an argument controlling whether to create
proc_subproc.
(child_info_spawn::child_info_spawn): Ditto.
* sigproc.cc (child_info::child_info): Ditto.
(child_info_spawn::child_info_spawn): Ditto.
(child_info::sync): Use passed in pid and HANDLE.
* fork.cc (fork_parent): Reflect additional arguments required for
child_info::sync.
* hookapi.cc (hook_or_detect_cygwin): Rename. Change so that NULL 'fn'
argument just returns "true", indicating that program uses cygwin1.dll.
* spawn.cc (av::win16_exe): New element.
* spawn.cc (av::iscygwin): New element.
(av::fixup): New function.
(spawn_guts): Protect against SEGV. Use fixup function to detect when it is
safe to wait for a spawned (as opposed to an execed) program. Reflect changes
in child_info::sync arguments.
* external.cc (cygwin_internal): Reflect function renaming to
hook_or_detect_cygwin.
* cygheap.cc (cygheap_fixup_in_child): Close handle after debug fixup has been
done to prevent false positives in handle collision.
* exceptions.cc (try_to_debug): Notify debugger if already being debugged.
allocate dynamically.
(pinfo::set_acl): Replace sa_buf by dynamically allocated acl_buf.
* sec_acl.cc (setacl): Allocate acl dynamically.
* sec_helper.cc (sec_acl): Add test for alignment of acl when
DEBUGGING is defined.
(__sec_user): Same for sa_buf.
* security.cc (verify_token): Define sd_buf as PSECURITY_DESCRIPTOR
and allocate dynamically.
(alloc_sd): Allocate acl dynamically.
security.h (sec_user_nih): Change first parameter to
SECURITY_ATTRIBUTES *.
(sec_user): Ditto.
* sigproc.cc (wait_sig): Define sa_buf as PSECURITY_ATTRIBUTES and
allocate dynamically.
* syscalls.cc (seteuid32): Define dacl_buf as PACL and allocate
dynamically.
* uinfo.cc (cygheap_user::init): Define sa_buf as PSECURITY_ATTRIBUTES
and allocate dynamically.
* winbase.h (ilockincr): Mark first argument of inline assembly as
earlyclobber.
(ilockdecr): Ditto.
(child_info::dwProcessId): New field.
* cygheap.cc (init_cheap): Delete.
(dup_now): Ditto.
(cygheap_setup_for_child): Ditto.
(cygheap_setup_for_child_cleanup): Ditto.
(cygheap_fixup_in_child): Simplify. Use new "child_copy" function to copy heap
from parent.
(_csbrk): Don't attempt allocation if within cygheap section. Fix so that more
than one allocation will succeed.
(cygheap_init): Reset possibly-nonzero region to zero.
* cygheap.h (cygheap_setup_for_child): Delete declaration.
(cygheap_setup_for_child_cleanup): Ditto.
(cygheap_start): Define as an array.
* cygwin.sc: Modernize. Remove unneeded sections. Define cygheap here.
* dcrt0.cc (do_exit): Reflect argument change to close_all_files.
* dtable.cc (dtable::vfork_parent_restore): Ditto.
* dtable.h: Ditto.
* fhandler.h: Ditto.
* fork.cc (fork_copy): Call ReadProcessMemory if there is no thread
(indicating that we're execing).
(fork_child): Don't mess with hParent.
(fork_parent): Remove hParent stuff. It happens earlier now. Remove call to
cygheap_setup_for_child* stuff.
(fork): Put child_info_stuff in grouped structure. Issue error if parent
handle is not set.
(child_copy): New function.
* sigproc.cc (child_info::child_info): Put cygheap settings here. Set parent
handle.
(child_info::~child_info): Close parent handle if it exists.
* spawn.cc (spawn_guts): Reorganize so that ciresrv is allocated at only the
last minute so that cygheap changes are reflected. Delete cygheap_setup*
calls.
* syscalls.cc (close_all_files): Add an argument to flag when the fd entry
should be released.
* winsup.h (close_all_files): Add an argument to close_all_files declaration.
Declare child_copy.
* pinfo.cc (_pinfo::set_ctty): to here.
* fhandler_mem.cc (fhandler_dev_mem::fstat): Don't fill out structure if this
is an on-disk device rather than an "auto" device.
* fhandler_raw.cc (fhandler_dev_raw::fstat): Ditto.
* path.cc (normalize_posix_path): Don't treat a standalone '//' as introducing
a UNC path.
(normalize_win32_path): Ditto.
* pinfo.h (_pinfo::exists): Declare "new" function.
(_pinfo::kill): Ditto.
* fhandler_termios.cc (tty_min::kill_pgrp): Use _pinfo::exists rather than
proc_exists.
* pinfo.cc (pinfo::init): Ditto. Don't do a low_priority_sleep(0) when looping
to find exec'ed procinfo.
(pinfo::release): Be more careful about unmapping and closing.
* signal.cc (_pinfo::kill): Rename from kill_worker. Accommodate entry into
_pinfo class.
(kill0): Use _pinfo::kill rather than kill_worker.
(kill_pgrp): Ditto. Use _pinfo::exists rather than proc_exists.
* sigproc.cc (_pinfo::exists): Rename from proc_exists.
(pid_exists): Use _pinfo::exists rather than proc_exists.
(remove_proc): Ditto.
* sigproc.h (proc_exists): Delete declaration.
* pinfo.cc (pinfo::exit): Use renamed function.
(proc_waiter): Ditto. Make a copy of input argument to avoid problems when
procs array is shuffled. Flag when copy is made so that remove_proc knows when
it is safe to reshuffle.
* sigproc.cc (proc_terminate): Don't flag process_state as PID_EXITED.
(remove_proc): Wait for waiter to finish copying pinfo element before moving it
(an actual wait should be an extremely rare event).
* include/sys/cygwin.h: Remove PID_ZOMBIE.
* pinfo.h: Rename EXITCODE_* defines.
(pinfo::set_exit_state): Remove parameter.
* pinfo.cc (set_exit_state): Remove parameter. Reverse sense of test so that
exitcode is checked for having been set rather than not having been set. Set
flag when exitcode has been established. Don't set PID_STATE here.
(pinfo::init): Remove exitcode initialization.
(pinfo::exit): Reflect change in EXITCODE_* naming. Set flag when exitcode has
been established. Reflect change in arguments to set_process_state.
(proc_waiter): Reflect change in arguments to set_process_state. Set
process_state here and only here.
* fhandler_process.cc (fhandler_process::fill_filebuf): Reflect removal of
PID_ZOMBIE define.
(format_process_stat): Ditto.
(format_process_status): Ditto.
* sigproc.cc (pid_exists): Ditto.
(stopped_or_terminated): Ditto. Make sure that only low-order 16 bits of
exitcode are used.
* spawn.cc (spawn_guts): Reflect change in EXITCODE_* naming.
(pinfo::exit): Move here from _pinfo::exit.
* sigproc.cc (child_info::sync): Use new function to set exitcode and
process_state.
* pinfo.cc (_pinfo::exit): Ditto.
(proc_waiter): Ditto.
(_pinfo::set_exit_state): Define new function.
(_pinfo::dup_proc_pipe): Close handle when there is no parent process around to
care about the exit value.
* dcrt0.cc (dll_crt0_0): Move subproc_ready synchronization later to make sure
that myself is still mapped in parent.
(do_exit): Reflect movement to pinfo::exit.
(__api_fatal): Ditto.
* exceptions.cc (signal_exit): Ditto.
* errno.cc (errmap): Map PROC_NOT_FOUND.
* init.cc (dll_entry): Release myself before exiting.
* sigproc.cc (proc_can_be_signalled): Set errno appropriately.
(sig_send): Ditto. Also remove ill-advised test for !myself->sendsig since
this is an indication of a process which is still initializating -- it is not
an error.
(child_info::sync): Don't set exitcode here. Assume that will happen in
proc_waiter, if necessary.
* spawn.cc (spawn_guts): Delay "wait_for_myself" logic until later. Don't wait
at all if the process has already exited. Reflect movement to pinfo::exit.
* pinfo.cc (pinfo::init): Initialize exitcode to unset state rather than
SIGTERM.
(proc_waiter): Detect if exit code is unset and use status from
GetExitCodeProcess.
* sigproc.cc (child_info::sync): Remove exit code detection here since
proc_waiter now (again) detects it.
(child_info::parent_wr_proc_pipe): Eliminate.
* pinfo.h (_pinfo::alert_parent): Move here from pinfo class.
(_pinfo::dup_proc_pipe): New method.
(_pinfo::sync_proc_pipe): Ditto.
* exceptions.cc (sig_handle_tty_stop): Reflect move of alert_parent.
* init.cc (dll_entry): Exit with status one if main process called ExitProcess.
* pinfo.cc (set_myself): Remove handling of parent_wr_proc_pipe.
(_pinfo::exit): Reflect move of alert_parent. Set procinfo to NULL to flag
that we are exiting normally. Always use exitcode when exiting
(although this could be a little racy).
(pinfo::init): Set default exit to SIGTERM. This will be the exit code
reported if process is terminated.
(_pinfo::dup_proc_pipe): New function.
(pinfo::wait): Duplicate wr_proc_pipe to the right place. Use dup_proc_pipe to
move the pipe to the child.
(_pinfo::sync_proc_pipe): New function.
(_pinfo::alert_parent): Move to _pinfo. Make sure that wr_proc_pipe is ours
before using it.
* sigproc.cc (child_info::child_info): Remove handling of parent_wr_proc_pipe.
* spawn.cc (spawn_guts): Pass our wr_proc_pipe to the child when execing.
Ensure that exit code of cygwin process started from windows is correctly set.
itself here, to avoid a race.
(cygthread::release): Clear more stuff. Add a diagnostic for an internal
error.
* cygthread.h (auto_release): New function.
* pinfo.h (pinfo::remember): Add an argument to denote whether child is
detached.
* fork.cc (fork_parent): Reflect change in arguments to pinfo::remember.
* pinfo.cc (_pinfo::exit): Signal exit more forcibly.
(proc_waiter): Use cygthread::auto_release to signify that cygthread::stub
should release the thread. This should avoid a race.
(pinfo::alert_parent): Don't signify an error when wr_proc_pipe == NULL.
* sigproc.cc (proc_subproc): Add support for PROC_DETACHED_CHILD.
* sigproc.h: Ditto.
* spawn.cc (spawn_guts): Specify whether child is detached or not when calling
pinfo::remember.
processes" if pid == -1 -- not just if pid is negative.
(proc_can_be_signalled): Fix another long-standing problem. Set correct errno
when detecting an exited process.
hProcess handle here since it is used to ensure that a new process isn't
created with the old pid after the old pid exits.
* spawn.cc (spawn_guts): Ditto.
* pinfo.cc (proc_waiter): Don't send any signals if we've execed since this
process doesn't officially exist.
* pinfo.h (pinfo::pid_handle): Eliminate. Just use hProc.
* sigproc.cc (sig_send): Don't send any signals if our sendsig doesn't exist.
That's a sign that we are execing.
(remove_proc): Eliminate pid_handle close.
* pinfo.h (pinfo::wait_thread): New element.
* pinfo.cc (pinfo::wait): Store "handle" to started thread in pinfo.
* sigproc.cc (proc_terminate): Kill any threads waiting for a process pipe.
(proc_subproc): Don't mess with pinfo if it's myself.
* child_info.h (child_info_types): Label enum for _PROC constants.
(child_info::child_info): New constructor.
(child_info::~child_info): New destructor.
(child_info::sync): Declare new function.
(child_info_fork::child_info_fork): New constructor.
(child_info_spawn::child_info_spawn): Remove old constructor.
(child_info_spawn::child_info_spawn): New constructor.
* dcrt0.cc (dll_crt0_0): Use correct sizeof when doing sanity check on passed
in child_info. Signal readiness to parent when not forking (and not spawning).
* fork.cc (sync_with_child): Delete.
(resume_child): Remove extra argument.
(sync_with_parent): Use child_info method to sync with parent.
(fork_child): Don't close fork_info->subproc_ready since that is now handled by
the destructor.
(fork_parent): Remove subproc_ready stuff. Use child_info sync method for
waiting.. Set start time here for child. Rename "forked" to "child".
(fork): Check ch.subproc_ready for validity here.
* pinfo.h (_pinfo::exec_sendsig): Temp storage for exec stub which may be
staying around to handle non-cygwin captive process.
(_pinfo::exec_dwProcessId): Ditto.
(_pinfo::_lock): Renamed from lock.
(_pinfo::lock): New method.
(_pinfo::unlock): Ditto.
(_pinfo::initialize_lock): Ditto.
* pinfo.cc (set_myself): Use initialize_lock method to initialize myself lock.
Set "exec" fields in _pinfo to zero to indicate that we've started
successfully. Set start time here when appropriate.
(_pinfo::commune_send): Use pinfo lock/unlock methods.
(proc_waiter): Remove special case for non-cywin processes. Reinstitute
handling for PID_NOCLDSTOP.
* sigproc.cc (proc_subproc): Set proper EAGAIN errno when process table is
filled.
(sig_send): Use exec_* fields from _pinfo for sending signals if the the _pinfo
sendsig never materializes.
(child_info::child_info): New constructor, renamed from init_child_info.
Zeroes child_info structure and sets appropriate fields in structure based on
chtype.
(child_info::~child_info): New destructor. Closes subproc_ready if it exists.
(child_info_fork::child_info_fork): New constructor.
(child_info_spawn::child_info_spawn): New constructor.
(child_info::ready): New function. Signals parent when child is ready.
(child_info::sync): New function. Wait for child to signal us or process to
die.
(remove_proc): Remove closing of hProcess since this should now be handled
shortly after process creation.
* spawn.cc (spawn_guts): Use child_info_spawn constructor rather than
init_child_info. Save exec_sendsig and exec_dwProcessId in execing _pinfo.
Rely on child_info constructor to properly set parent_wr_proc_pipe in ciresrv.
Revert to previous determination on whether to start a process in suspended
mode. Remove reparenting stuff. Just keep a stub around if starting a
non-cygwin process.
* fork.cc (fork_parent): Set parent_wr_proc.
* pinfo.cc (set_myself): Close child_proc_info->parent_wr_proc if it exists
rather than trying to get value from parent _pinfo.
* pinfo.h (enum parent_aleter): New enum.
(pinfo::alert_parent): Declare as returning a value.
(pinfo::parent_alive): New function.
* pinfo.cc (pinfo::alert_parent): Set wr_proc_pipe to invalid non-NULL value
when parent disappears. Return success of operation.
(proc_waiter): Use __ALERT_* enum for control since these are not really
signals. Implement __ALERT_ALIVE.
* sigproc.cc (my_parent_is_alive): Eliminate.
* sigproc.h (my_parent_is_alive): Ditto for declaration.
(__SIGREPARENT): Eliminate.
* dcrt0.cc (dll_crt0_0): Remove hexec_proc stuff.
* fork.cc (fork_child): Remove call to pinfo_fixup_after_fork.
* pinfo.cc (set_myself): Close and zero pid_handle if set.
(pinfo_fixup_after_fork): Delete.
(proc_waiter): Don't close vchild.hProcess here. Do that when we are remove
the vchild from procs. Save hProcess as pid_handle only on first reparent
operation.
(pinfo::wait): Don't set pid_handle here.
(pinfo::alert_parent): Always try to send signal. If unsuccessful then close
and zero wr_proc_pipe.
* pinfo.h (pinfo::pinfo): Make sure that appropriate parts of the class are
zeroed on construction.
(pinfo::alert_parent): Take char argument.
(pinfo_fixup_after_fork): Delete declaration.
(hexec_proc): Ditto.
* sigproc.cc (remove_proc): Close pid_handle and hProcess if appropriate.
* spawn.cc (spawn_guts): Set cygheap->pid_handle on first exec.
* cygheap.h (init_cygheap::pid_handle): New element.
* pinfo.cc (set_myself): Clear previously existing cygheap->pid_handle when a
new process has been started.
(pinfo::wait): Make sure that a handle to the newly forked/spawned process is
kept around so that the pid will not be reused.
* pinfo.h (_pinfo::pid_handle): Move.
(pinfo::pid_handle): to here.
* spawn.cc (spawn_guts): Create a pid_handle in cygheap prior to spawning to
ensure that the pid does not get reused during the lifetime of the "cygwin
pid".
* pinfo.h (pinfo::alert_parent): New function.
* exceptions.cc (sig_handle_tty_stop): Use alert_parent to send "signals" to
parent.
* fork.cc (fork_parent): Don't close pi.hProcess. Let the waiter thread do
that.
* pinfo.cc (proc_waiter): Detect case where process exits without setting the
exit code and use value from GetExitCodeProcess. Reluctantly implement
__SIGREPARENT.
(pinfo::alert_parent): Define.
* sigproc.h (__SIGREPARENT): New enum.
* spawn.cc (spawn_guts): Send reparent signal to parent on exec. Always create
process in suspended state to avoid races. Remove cygthread.h in favor of
cygtls.h throughout since cygtls now includes cygthread.h. Eliminate
ppid_handle usage throughout.
* child_info.h: Regenerate magic number
(child_info): Remove pppid_handle.
* cygthread.h (cygthread::release): New method. Frees thread without waiting.
* cygthread.cc (cygthread::stub): Set _ctinfo in _mytls to point to information
for executing thread. Don't call SetEvent if thread is no longer in use.
(cygthread::simplestub): Ditto.
* cygtls.h (_cygtls::_ctinfo): New element contains pointer to information
about executing cygthread, if any.
* dcrt0.cc: Remove last vestiges of per_thread stuff.
(dll_crt0_0): Ditto. Remove accommodation for ppid_handle.
(do_exit): Remove obsolete reparenting test.
(_exit): Exit with a more SUSv3-like exit value.
* dtable.cc (dtable::stdio_init): Check for myself->cygstarted rather than
myself->ppid_handle to see if we were started by a cygwin process.
* exceptions.cc (open_stackdumpfile): Ditto.
(handle_exceptions): Ditto.
(ctrl_c_handler): Ditto.
(sig_handle_tty_stop): Ditto. Let parent send signal to itself on STOP.
(sigpacket::process): Comment out vfork test.
(signal_exit): Use more SUSv3-like exit value on signal.
* external.cc (fillout_pinfo): Don't set hProcess.
* fork.cc: Remove VFORK cruft.
(per_thread::set): Delete.
(fork_child): Remove perthread stuff.
(fork_parent): Remove obsolete subproc_init. Accommodate new method for
tracking subprocesses.
* pinfo.cc (set_myself): Accommodate new pinfo/_pinfo layout. Set some things
here that used to be set in wait_sig.
(_pinfo::exit): Set exitcode here. Close process pipe.
(_pinfo::commune_send): Accommodeate new pinfo/_pinfo layout.
(proc_waiter): New function. Waits, in a thread for subprocess to go away.
(pinfo::wait): New function. Initialization for proc_waiter.
* pinfo.h (_pinfo::exitcode): New element.
(_pinfo::cygstarted): Ditto.
(_pinfo::wr_proc_pipe): Ditto.
(_pinfo::ppid_handle): Delete.
(_pinfo::hProcess): Delete.
(_pinfo::lock): Delete.
(pinfo::hProcess): New element.
(pinfo::lock): Ditto.
(pinfo::wait): Declare new function.
(pinfo::preserve): Define new function.
* sigproc.cc: Remove old stuff from wait_subproc thread based method.
(zombies): Remove.
(procs): New.
(my_parent_is_alive): Just check that the parent pid exists.
(mychild): Just use pinfo methods to determine if child is mine.
(proc_subproc): Revamp PROC_ADDCHILD to use pinfo::wait. Remove
PROC_CHILDTERMINATED logic. Use different method to remove processes from list
when SIGCHLD == SIG_IGN.
(proc_terminate): Gut.
(subproc_init): Delete.
(init_child_info): Remove setting of pppid_handle.
(checkstate): Revamp to only scan procs array.
(remove_proc): Rename from remove_zombie. Don't close hProcess or pid_handle.
Don't release memory if it's myself.
(stopped_or_terminated): Change logic to handle new consolidated proc/zombie
array.
(wait_subproc): Delete.
* sigproc.h: Remove obsolete EXIT_* defines.
(subproc_init): Remove declaration.
* spawn.cc (spawn_guts): Remove reparenting stuff. Use standard wait logic to
wait for child if started from a non-cygwin process.
* tlsoffsets.h: Regenerate.
* tty.cc (tty_init): Check for myself->cygstarted rather than
myself->ppid_handle to see if we were started by a cygwin process.
* include/sys/signal.h (external_pinfo::exitcode): Replace hProcess.
* include/sys/wait.h (WCOREDUMP): Define.
* fhandler_tty.cc (fhandler_tty_slave::read): Add debugging output for timeout
case.
* signal.cc (abort): Flag that we are exiting with the ABORT signal.
starting.
* child_info.h (init_child_info): Remove pid argument from declaration.
* cygheap.h (init_cygheap::pid): New element.
* dcrt0.cc (dll_crt0_0): Eliminate handling of now-noexistent cygpid parameter
in child_info struct. Set forkee to 'true' rather than cygpid since the pid
value was never used.
(dll_crt0_1): Ditto.
(_dll_crt0): Ditto.
* fork.cc (fork_child): Don't wait for sigthread. This is handled in the fork
call now.
(fork_parent): Remove obsolete pid argument from init_child_info call. Don't
do anything special with cygpid when DEBUGGING.
(fork): Delay all signals during fork.
(fork_init): Don't do anything special when DEBUGGING.
* pinfo.cc (set_myself): Remove pid parameter. Use new pid field in cygheap.
(pinfo_init): Don't pass pid argument to set_myself.
* sigproc.cc (sig_send): Wait for dwProcessId to be non-zero as well as
sendsig.
(init_child_info): Eliminate handling of pid.
(wait_sig): Implement method to temporarily hold off sending signals.
* sigproc.h (__SIGHOLD): New enum.
(__SIGNOHOLD): Ditto.
* spawn.cc (spawn_guts): Remove obsolete pid argument from init_child_info
call.
handling whenever a '\' is detected.
* signal.cc (sigaction): Make strace output more informative.
* sigproc.cc (pending_signals::add): Just index directly into signal array
rather than treating the array as a heap.
(pending_signals::del): Ditto.
(wait_sig): Don't send signal if we already have a similar signal queued.
* sigproc.h (call_signal_handler_now): Remove obsolete declaration.
get the cygtls table lock.
* cygtls.h (_cygtls::remove_wq): Add wait argument.
* sigproc.cc (_cygtls::remove_wq): Honor wait argument when acquiring lock.
(proc_terminate): Don't NULL sync_proc_subproc since other threads may still
try to access it.
(_cygtls::wq): Declare.
* cygtls.cc (_cygtls::fixup_after_fork): Clear wq.thread_ev to avoid using an
invalid event handle in forked process.
* dcrt0.cc (waitq_storage): Delete.
(threadstuff): Remove waitq_storage.
* perthread.h (per_thread_waitq): Delete.
(waitq_storage): Delete declaration.
* sigproc.cc (sigproc_init): Remove perthread waitq consideration.
* sigproc.h (waitq): Delete declaration.
* wait.cc (wait4): Use _my_tls waitq structure rather than per_thread.
* cygtls.h (_cygtls::newmask): Delete member.
(_cygtls::deltamask): New member.
* gendef (_sigdelayed): Replace the call to set_process_mask by a call to
set_process_mask_delta.
* exceptions.cc (handle_sigsuspend): Do not filter tempmask. Or
SIG_NONMASKABLE in deltamask as a flag.
(_cygtls::interrupt_setup): Set deltamask only.
(set_process_mask_delta): New function.
(_cygtls::call_signal_handler): Replace the first call to set_process_mask by a
call to set_process_mask_delta.
* tlsoffsets.h: Regenerate.
function, in an exception, spinning, or locked.
* gendef (_sigfe): Move incyg setting earlier.
(sigreturn): Set incyg flag to avoid interrupting called cygwin functions.
(sigdelayed): Ditto.
(stabilize_sig_stack): Ditto.
* sigproc.cc (proc_subproc): Don't restore process lock early in exec case.
* cygtls.h: Reorganize fields in _cygtls slightly.
* tlsoffsets.h: Regenerate.
to force signal to be handled. Zero event here to prevent races.
* signal.cc (sigwaitinfo): Use local handle value for everything since signal
thread could zero event element at any time. Detect when awaking due to thread
not in mask and set return value and errno accordingly. Don't set signal
number to zero unless we've recognized the signal.
* sigproc.cc (sigq): Rename from sigqueue throughout.
* thread.cc (pthread::join): Handle signals received while waiting for thread
to terminate.
* cygwin.din: Export sighold, sigqueue.
* exceptions.cc (sighold): Define new function.
* signal.cc (handle_sigprocmask): Set correct errno for invalid signal.
Simplify debugging output.
(sigqueue): Define new function.
* include/cygwin/signal.h (sighold): Declare new function.
(sigqueue): Ditto.
* include/cygwin/version.h: Bump API minor version number.
* include/limits.h (TIMER_MAX): Define.
(_POSIX_TIMER_MAX): Ditto.
(sigfe.s): Ensure that sigfe.s will be regenerated if it does not exist.
* dll_init.cc (dll_dllcrt0): Simplify initializing tests.
* exceptions.cc (setup_handler): Detect when stub caller is either spinning or
has acquired the lock after being suspended to avoid windows problems with
suspending a win32 API call.
* cygtls.h (_cygtls::spinning): Declare new element.
* gendef: Remove unused _siglist_index and _siglist declaration.
(_sigfe): Set spinning element when potentially looping, waiting for lock.
(_sigbe): Ditto.
(_cygtls::lock): Ditto.
(_longjmp): Ditto.
* tlsoffsets.h: Regenerate.
* pinfo.cc (_pinfo::exit): Set final exit state here. Call sigproc_terminate
if invoked with 'norecord'. Clear any residual _cygtls stuff.
* winsup.h (exit_states): Define ES_FINAL.
* spawn.cc (spawn_guts): Don't call proc_terminate specifically when execing.
Let _pinfo::exit handle that case.
* sigproc.cc (wait_subproc): Always exit loop early when proc_loop_wait.
* init.cc (munge_threadfunc): Eliminate unused argument.
(dll_entry): Reflect above change in call to munge_threadfunc.
* cygtls.h (_cygtls::call_signal_handler): Rename from call_signal_handler_now.
(_cygtls::push): Make second argument mandatory.
(_cygtls::fixup_after_fork): Declare new function.
(_cygtls::lock): Ditto.
* cygtls.cc (_cygtls::fixup_after_fork): Define new function.
* dcrt0.cc (cygwin_finished_initializing): Define as bool.
(alloc_stack): Use _tlstop rather than arbitrary variable in probably vain
attempt to avoid strange fork problem on CTRL-C.
(dll_crt0_0): Remove obsolete winpids::init call.
* dll_init.cc (dll_dllcrt0): Detect forkee condition as equivalent to
initializing.
* winsup.h (cygwin_finished_initializing): Declare as bool.
* exceptions.cc (handle_exceptions): Rely on cygwin_finished_initializing to
determine how to handle exception during process startup.
(_cygtls::call_signal_handler): Rename from call_signal_handler_now.
(_cygtls::interrupt_now): Fill in second argument to push.
(signal_fixup_after_fork): Eliminate.
(setup_handler): Initialize locked to avoid potential inappropriate unlock.
Resume thread if it has acquired the stack lock.
(ctrl_c_handler): Just exit if ctrl-c is hit before cygiwn has finished
initializing.
* fork.cc (sync_with_child): Don't call abort since it can cause exit
deadlocks.
(sync_with_child): Change debugging output slightly.
(fork_child): Set cygwin_finished_initializing here. Call _cygtls fork fixup
and explicitly call sigproc_init.
(fork_parent): Release malloc lock on fork failure.
(vfork): Call signal handler via _my_tls.
* sigproc.cc (sig_send): Ditto.
* syscalls.cc (readv): Ditto.
* termios.cc (tcsetattr): Ditto.
* wait.cc (wait4): Ditto.
* signal.cc (nanosleep): Ditto.
(abort): Ditto.
(kill_pgrp): Avoid killing self if exiting.
* sync.cc (muto::acquire): Remove (temporarily?) ill-advised exiting_thread
check.
* gendef (_sigfe): Be more agressive in protecting stack pointer from other
access by signal thread.
(_cygtls::locked): Define new function.
(_sigbe): Ditto.
(_cygtls::pop): Protect edx.
(_cygtls::lock): Use guaranteed method to set eax to 1.
(longjmp): Aggressively protect signal stack.
* miscfuncs.cc (low_priority_sleep): Reduce "sleep time" for secs == 0.
* pinfo.cc (winpids::set): Counterintuitively use malloc's lock to protect
simultaneous access to the pids list since there are pathological conditions
which can cause malloc to call winpid.
(winpids::init): Eliminate.
* pinfo.h (winpids::cs): Eliminate declaration.
* pinfo.h (winpids::init): Eliminate definition.
version.
* debug.cc (__set_errno): Ditto.
* exceptions.cc (handle_sigsuspend): Remove spurious sig_dispatch_pending call.
(set_signal_mask): When there seem to be pending signals to dispatch, tell
signal_dispatch_pending/sig_send not to specifically call any handlers.
* sigproc.h (sig_dispatch_pending): Change declaration to void.
* sigproc.cc (sig_dispatch_pending): Change definition to void. Take an
argument to determine whether to tell sig_send to wait for handler to be
called.
* sigproc.cc (sig_send): Don't call signal handler when sig == __SIGFLUSHFAST.
(wait_sig): Honor __SIGFLUSHFAST. Guard against sigpacket::process nuking
si_signo.
* sigproc.h (__SIGFLUSHFAST): Define new special signal.
(sig_dispatch_pending): Change declaration to void. Take optional boolean
argument.
* fork.cc (vfork): Add debugging output.
* fhandler.h (fhandler_base::has_acls): Make pass through for path_conv method.
(fhandler_base::isremote): Ditto.
(fhandler_base::is_fs_special): Ditto.
(fhandler_base::has_attribute): Ditto. Define new function.
(fhandler_base::fhaccess): Declare new function based on access_worker.
(fhandler_base::set_has_acls): Eliminate obsolete function.
(fhandler_base::set_isremote): Ditto.
* fhandler.cc (fhandler_base::fhaccess): Move from syscalls.cc and into
fhandler_base class. Use fhandler methods to access data rather than path_conv
stuff.
(fhandler_base::device_access_denied): Use fhaccess method.
* fhandler_disk_file.cc (fhandler_disk_file::opendir): Ditto.
(fhandler_base::open_fs): Remove calls to obsolete functions.
* fhandler_virtual.cc (fhandler_virtual::open): Ditto.
* winsup.h (access_worker): Remove obsolete access_worker declaration.
*syscalls.cc (access_worker): Move function to fhandler.cc.
(access): Use fhaccess method.
* pinfo.cc (_pinfo::set_ctty): Clarify debugging output.
* sigproc.cc (sig_dispatch_pending): Ditto.
* syscalls.cc (setsid): Perform minor rearrangement.
* exceptions.cc (setup_handler): Improve debugging output.
(call_signal_handler_now): Remove ill-advised debugger call.
* sigproc.cc (sigcomplete_main): Delete.
(sig_send): Honor FIXME and avoid using main thread's completion event for
everything or suffer races.
(pending_signals::add): Default stored mask to current process mask rather than
mask at time of signal send.
(wait_sig): Add debugging output.
* sigproc.h (sigpacket::mask_storage): Delete.
TIOCSWINSZ. It is not an error for ioctl_request_event to be missing.
* sigproc.cc (pending_signals::save): New function.
(pending_signals::restore): Ditto.
(sig_clear): Save/restore current queue pointer.
(wait_sig): Delete signals marked as such.
* sigproc.h (__SIGDELETE): New enum.
we're not closing what we think we're closing.
(sig_send): Improve debugging when exiting due to no_signals_available.
* wincap.h (wincaps::cant_debug_dll_entry): New element.
* wincap.cc: Implement above element throughout.
* dcrt0.cc (initial_env): Accommodate changes necessary to allow initial
debugging for systems which do not allow debugging in dll_entry.
(dll_crt0_0): Add initial_env call back here.
* Makefile.in (install-man): Use mandir as target for installation.
* include/cygwin/version.h: Bump DLL minor number to 7 (should have been done
earlier).
* cygwin.din: Make clock SIGFE. Add clock_gettime, sigwaitinfo, timer_create,
timer_delete, timer_settime.
* include/cygwin/version.h: Reflect above additions.
* fork.cc (fork_child): Call fixup_timers_after_fork.
* signal.cc (sigwait): Remove unused variable.
* timer.cc: New file.
(clock_gettime): Define new function.
(timer_tracker): Define new struct used by timer functions.
(timer_tracker::timer_tracker): New function.
(to_us): New function.
(timer_thread): New function.
(timer_tracker::settime): New function.
(timer_create): New function.
(timer_settime): New function.
(timer_delete): New function.
(fixup_timers_after_fork): New function.
* cygthread.cc: Bump thread count.
* signal.cc (sigwaitinfo): Define new function.
(sigwait): Redefine based on sigwaitinfo.
* include/cygwin/signal.h (sigwaitinfo): Declare.
(sigwait): Ditto.
* dtable.cc (dtable::vfork_parent_restore): Avoid double close of ctty when
ctty == ctty_on_hold.
* cygtls.h (_threadinfo::threadkill): New element.
(_threadinfo::set_threadkill): Declare new function.
(_threadinfo::reset_threadkill): Declare new function.
* dcrt0.cc (dcrt0_1): Call here so that it will be possible to attach to
running process with #(*& Windows Me/9x.
(initial_env): Try to initialize strace if uninitialized.
* gendef: Don't zero signal if threadkill is set since that will happen in the
called function.
* signal.cc (sigwait): Ensure cleanup in error conditions.
* sigproc.cc (sig_send): Clear packet mask storage.
(wait_subproc): Fill in child exit code in siginfo_t structure.
* thread.cc (pthread_kill): Set threadkill flag.
* tlsoffsets.h: Regenerate. Throughout, use siginfo_t to fill out all signal
information for "kernel" signals.
* cygtls.h (_threadinfo::set_siginfo): Declare new function.
* cygtls.cc (_threadinfo::set_siginfo): Define new function.
* dcrt0.cc (do_exit): Accommodate siginfo_t considerations.
* exceptions.cc (handle_exceptions): Ditto.
(sig_handle_tty_stop): Ditto.
(ctrl_c_handler): Use killsys() to send signal.
(sigpacket::process): Rename from sig_handle. Use siginfo_t field from
sigpacket for everything.
(tty_min::kill_pgrp): Accommodate siginfo_t considerations.
(fhandler_termios::bg_check): Ditto.
* fhandler_tty.cc (fhandler_tty_slave::ioctl): Use killsys() to send signal.
* signal.cc (kill_worker): Rewrite to use siginfo_t second argument.
(kill_pgrp): Ditto.
(kill0): Define new function pulled from kill().
(kill): Rewrite as frontend to kill0.
(killsys): Define new function.
* sigproc.cc (sigelem): Eliminate.
(sigpacket): Move to sigproc.h. Subsume sigelem.
(pending_signals): Use sigpacket rather than sigelem for everything.
(sig_clear): Ditto.
(wait_sig): Ditto.
(sig_send): Rewrite to use siginfo_t argument.
(sig_send): New function wratpper to sig_send with siginfo_t argument.
(wait_subproc): Accommodate siginfo_t considerations.
* thread.cc (pthread_kill): Ditto.
* sigproc.h (sigpacket): Move here.
(sigpacket::process): Declare "new" function.
(sig_handle): Eliminate declaration.
(sig_send): Declare with new paramaters.
(killsys): Declare new function.
(kill_pgrp): Declare.
* winsup.h: Move some signal-specific stuff to sigproc.h.
* include/cygwin/signal.h: Tweak some siginfo_t stuff.
compiler bug.
* autoload.cc (TryEnterCriticalSection): Remove.
* dcrt0.cc (dll_crt0_0): Delete inappropriate setting of _my_tls.stackptr to
NULL since it has really bad consequences. Make 'si' an automatic variable.
* cygtls.cc (_threadinfo::init_thread): Correct thinko which caused thread list
to be allocated every time.
* cygtls.h (CYGTLS_PADSIZE): Define as const int.
* sync.h: Make multiple inclusion safe.
(muto::next): Eliminate.
(muto::exiting_thread): New variable.
(muto::set_exiting_thread): New function.
(new_muto): Change to use different section for mutos since c++ give
inexplicable warning in some cases otherwise.
(new_muto1): Ditto.
* dcrt0.cc (do_exit): Call muto::set_exiting_thread here.
* sync.cc (muto_start): Eliminate.
(muto::acquire): Always give exiting thread a lock. Never give thread a lock
if exiting.
(muto::release): Ditto for releasing.
* dtable.cc (dtable::init_lock): Unline function and define here.
* dtable.h (lock_cs): Define as a muto since critical sections seem to work
oddly on Windows Me.
(lock): Accommodate switch to muto.
(unlock): Ditto.
* exceptions.cc (setup_handler): Don't worry about acquiring mutos since that
hasn't mattered for a long time.
(signal_exit): Ditto: muto stuff will be handled automatically on exit now.
* Makefile.in (DLL_IMPORTS): Link advapi32 to ensure proper DLL initialization.
* autoload.cc (RegCloseKey): Arbitrarily choose this function as a "seed" to
pull the advapi32 link library in. So, comment out the autoloading.
* cygtls.cc (_threadinfo::init_thread): Just clear CYGTLS_PADSIZE.
(_threadinfo::remove): Add debugging.
(_threadinfo::find_tls): Ditto.
* cygtls.h (_threadinfo::padding): Make zero length (for now?).
* dcrt0.cc (dll_crt0_0): Move more initialization here from dll_crt0_1.
(dll_crt0_1): See above.
* dtable.h (dtable::lock): Remove commented out critical section locking.
* dtable.h (dtable::init_lock): Remove commented out critical section locking.
* dtable.h (dtable::unlock): Remove commented out critical section locking.
* exceptions.cc (interruptible): bool'ize.
* init.cc (threadfunc_fe): Revert to storing threadfunc at stack bottom.
(munge_threadfunc): Ditto. Avoid adding overhead to calibration_thread.
(prime_threads): Don't initialize tls stuff.
(dll_entry): Make minor change to initialization order.
* tlsoffsets.h: Regenerate.
* sigproc.cc (wait_sig): Add sanity check for end of process thread exit.
* select.h: Make minor formatting change.
* Makefile.in: Add still more -fomit-frame-pointer functions.
* dtable.h (dtable::lock): New function.
(dtable::unlock): New function.
(dtable::init_lock): New function.
* cygheap.h (HEAP_TLS): Declare new enum value.
(init_cygheap::threadlist): Declare new array.
(init_cygheap::sthreads): Declare new variable.
(cygheap_fdmanip::~cygheap_fdmanip): Use new dtable lock/unlock functions.
(cygheap_fdnew::cygheap_fdnew): Ditto.
(cygheap_fdget::cygheap_fdget): Ditto.
* dtable.cc (dtable_init): Initialize fdtab critical section.
(dtable::fixup_after_fork): Ditto.
(dtable::fixup_after_exec): Ditto.
(dtable::dup2): Use lock/unlock calls to protect access to fdtab.
(dtable::find_fifo): Ditto.
(dtable::fixup_before_fork): Ditto.
(dtable::fixup_before_exec): Ditto.
(dtable::set_file_pointers_for_exec): Ditto.
(dtable::vfork_child_dup): Ditto.
(dtable::vfork_parent_restore): Ditto.
* syscalls.cc (close_all_files): Ditto.
* sync.h (muto::acquired): Declare new function.
(new_muto1): Declare new macro used to specify name of muto storage.
* sync.cc (muto::acquired): Define new function.
* cygthread.cc (cygthread::stub): Remove signal chain removal call since it is
handled during initialization now.
* cygthread.cc (cygthread::simplestub): Remove signal chain removal call since
it is handled during initialization now.
* cygtls.cc (sentry): New class used for locking. Use throughout.
(_threadinfo::reset_exception): Don't pop stack.
(_threadinfo::find_tls): Move from exceptions.cc.
(_threadinfo::init_thread): Initialize array of threads rather than linked
list. Take second argument indicating thread function for this thread.
(_threadinfo::remove): Search thread array rather than linked list. Use sentry
to lock. Only unlock if we got the lock.
(_threadinfo::find_tls): Ditto for first two.
(handle_threadlist_exception): Handle exceptions when manipulating the thread
list in case of premature thread termination.
(_threadinfo::init_threadlist_exceptions): Ditto.
* cygtls.h (TLS_STACK_SIZE): Decrease size.
(_threadinfo::padding): Add element to avoid overwriting lower part of stack.
(_threadinfo::remove): Add a "wait" argument to control how long we wait for a
lock before removing.
* exceptions.cc (init_exception_handler): Make global. Take argument to
control exception handler being set.
(ctrl_c_handler): Wait forever when removing self from signal chain.
(_threadinfo::find_tls): Move to cygtls.cc.
(sig_handle): Reorganize detection for thread-specific signals.
* heap.cc (heap_init): Rework slightly. Make fatal error more verbose. Remove
malloc initialization since it can't happen during dll attach.
* init.cc (search_for): Move address to search for on stack here.
(threadfunc_ix): Ditto for stack offset. Make shared so that stack walk
potentially only has to be done once when cygwin processes are running.
(threadfunc_fe): Use standard tls to store thread function (may change back
later).
(calibration_thread): New function. Potentially called to find threadfunc_ix.
(munge_threadfunc): Search for "search_for" value on stack. Output warning
when thread func not found on stack. Use standard tls to store thread
function.
(prime_threads): New function. Called to prime thread front end.
(dll_entry): Call dll_crt0_0 here when DLL_PROCESS_ATTACH. Call prime_threads
here. Try to remove thread from signal list here.
* sigproc.cc (wait_sig): Initialize threadlist exception stuff here.
* thread.cc (pthread::exit): Pass argument to signal list remove function.
* thread.h: Remove obsolete *ResourceLock defines.
* tlsoffsets.h: Regenerate.
* winsup.h (spf): Define temporary debug macro to be deleted later.
* dcrt0.cc (dll_crt0_0): New function, called during DLL initialization.
Mainly consists of code pulled from dll_crt0_1.
(dll_crt0_1): See above.
(_dll_crt0): Wait for initial calibration thread to complete, if appropriate.
Move some stuff to dll_crt0_0.
(initialize_main_tls): Accommodate argument change to
_thread_info::init_thread.
* fork.cc (fork_child): Ditto.
(sync_with_child): Fix debug message.
* external.cc (cygwin_internal): Remove special considerations for
uninitialized dll since initialization happens during dll attach now.
* dlfcn.cc (dlopen): Remove obsolete *ResourceLock calls.
(dlclose): Ditto.
* cygheap.h (init_cygheap::close_ctty): Declare new function.
* cygheap.cc (init_cygheap::close_ctty): Define new function.
* syscalls.cc (close_all_files): Use close_ctty.
(setsid): Ditto.
* cygthread.cc (cygthread::stub): Remove exception initialization.
* cygthread.cc (cygthread::stub): Remove exception initialization.
(cygthread::simplestub): Ditto.
* thread.cc (pthread::thread_init_wrapper): Ditto.
* cygtls.cc (_last_thread): Make static.
(_threadinfo::call2): Initialize exception handler here.
(_threadinfo::find_tls): Move here.
* exceptions.cc (_threadinfo::find_tls): Move.
* dcrt0.cc (__api_fatal): Add prefix info to message here rather than including
it in every call to function.
* winsup.h (api_fatal): Accommodate above change.
* debug.cc (add_handle): Don't do anything if cygheap not around.
(mark_closed): Ditto.
* dll_init.cc (dll_list::detach): Fix debug output.
* fork.cc (sync_with_child): Ditto.
(vfork): Improve debug output.
* heap.cc (heap_init): Ditto.
* exceptions.cc (try_to_debug): Clarify message when debugger attaches.
signal handlers. Reorganize to cause potential SEGV on stack overflow.
* sigproc.cc (no_signals_available): Check sendsig value rather than relying on
obsolete sig_loop_wait.
(sigproc_terminate): Ditto.
(proc_can_be_signalled): Check sendsig value even for myself.
* tlsoffsets.h: Regenerate.
(__cygwin_user_data::impure_ptr): Ditto.
(_dll_crt0): Reluctantly initialize _impure_ptr here.
(initialize_main_tls): Eliminate local_clib initialization since it now happens
in init_thread.
* init.cc (dll_entry): Reluctantly remove code which set _impure_ptr to the
main thread's local_clib.
* perthread.h (reent_data): Remove obsolete declaration.
* sigproc.cc (proc_subproc): Add more debugging output.
(get_proc_lock): Ditto.
*dcrt0.cc (dll_crt0_1): Allocate argv[0] via malloc since main thread could
exit.
calculated mask in debugging output.
* sigproc.h (set_signal_mask): Reflect above change in declaration.
* path.cc (mount_item::build_win32): Take path apart before feeding it to
fnmunge. Throughout, change use of _reent_winsup()-> to _my_tls.locals.
instead. Throughout, remove obsolete MT_SAFE/_CYG_THREAD_FAILSAFE
considerations. Througout, add cygtls.h include.
* Makefile.in (DLL_OFILES): Add cygtls.o. Add some more objects to the
-fomit-frame-pointer list.
* acconfig.h: Remove obsolete settings.
* config.h.in: Ditto.
* bsdlib.cc: Add cygtls.h include.
* configure.in: Remove --enable-extra-threadsafe-checking.
* configure: Regenerate.
* cygtls.h (_local_storage): New struct renamed from _winsup_t (sic).
(_threadinfo:local_clib): Add new field.
(_threadinfo::locals): Ditto.
(_threadinfo::init_thread): Accept second _reent * argument.
(_threadinfo::call): Define as regparm.
(CYGTLS_PADSIZE): Remove unnecessary slop.
(_getreent): Define as a macro.
* thread.h: Remove _CYG_THREAD_FAILSAFE and MT_SAFE stuff.
(_winsup_t): Move to cygtls.h.
(ResourceLocks::ResourceLocks): Eliminate empty constructor.
(MTinterface::reents): Eliminate.
(MTinterface::thread_self_key): Eliminate.
(MTinterface::MTinterface): Eliminate.
* dcrt0.cc: Include stdio.h for _impure_ptr initialization.
(do_global_ctors): Remove run_ctors_p (sic) considerations. Don't call atexit
here.
(__main): Initialize destructors for user here.
(dll_crt0_1): Accept a dummy argument. Don't call init_thread here. Don't set
_impure_ptr here. Call do_global_ctors after more things have been
initialized.
(_dll_crt0): Define zeros buffer as max of needed size of CYGTLS_PADSIZE so
that it can be used for two purposes while minimizing stack usage. Initialize
_impure_ptr specifically, for speed. Call dll_crt0_1 with buffer argument.
(cygwin_dll_init): Call dll_crt0_1 with dummy argument.
* dtable.cc (dtable::find_unused_handle): Remove call to AssertResourceOwner.
* exceptions.cc: Move _threadinfo stuff to new file.
* cygtls.cc: New file.
* gentls_offsets: Accommodate increasing complexity of cygtls.h.
* hires.h (hires_base::~hires_base): Remove.
* init.cc (dll_entry): Remove setting of reents.
* thread.cc: Remove syslog.h include.
(__getreent): Simplify to use _my_tls.
(_reent_winsup): Delete.
(AssertResourceOwner): Delete.
(MTinterface::Init): Remove setting of _clib and _winsup, with all that
entails.
(MTinterface::fixup_after_fork): Ditto.
(pthread::thread_init_wrapper): Ditto. Also remove call to
set_tls_self_pointer.
(pthread::set_tls_self_pointer): Eliminate.
(pthread::get_tls_self_pointer): Just return _my_tls.tid;
(__reent_t::init_clib): Eliminate.
* tlsoffsets.h: Regenerate.
getsigmask.
* fhandler.h (fhandler_base): Make friends with close_all_files.
* pinfo.cc (_pinfo::set_ctty): Add more debugging.
* sigproc.cc (proc_can_be_signalled): Detect state when signal handler thread
is gone in target process as an EPERM situation. Set errno to ESRCH if process
doesn't exist.
(sigproc_terminate): Set sendsig to illegal value when closed.
(sig_send): Rely on proc_can_be_signalled setting the proper errno.
* syscalls.cc (close_all_files): Detect when all ttys are closed prior to
calling close_all_files. The ctty needs to be closed explicitly in this case.
throughout.
* tty.cc (tty::common_init): Remove call to SetKernelObjectSecurity and edit
some comments.
* cygheap.h (init_cygheap::ctty): Add new element.
* devices.in (device::parse): Remove special handling for /dev/tty.
* devices.cc: Regenerate.
* dtable.cc (build_fh_pc): Don't reset /dev/tty device. Let the device opener
do that.
* fhandler_termios.cc (tty_min::set_ctty): Redefine to _pinfo class.
* fhandler_tty.cc (fhandler_tty_common::set_close_on_exec): Avoid setting
noninherit flag for ctty.
* tty.h: Move BOOLs to bools.
(tty_min::set_ctty): Redeclare to _pinfo class.
* pinfo.cc (_pinfo::set_ctty): Define new function based on tty_min::set_ctty.
Change first argument from tty number to tty_min class.
* pinfo.h (_pinfo::set_ctty): Declare.
* fhandler_console.cc (fhandler_console::get_tty_stuff): Reflect move of
set_ctty to _pinfo class.
* fhandler_tty.cc (fhandler_tty_slave::open): Treat FH_TTY specially. Use
saved cygheap value if it exists. Otherwise convert to real device and save on
first time open.
(fhandler_tty_common::dup): Potentially set controlling tty if duping a slave
tty.
* syscalls.cc (setsid): Close controlling tty in cygheap.
* tty.cc: Change some BOOLs to bools.
* exceptions.cc: Ditto.
* fhandler_termios.cc: Ditto.
* signal.cc: Ditto.
* sigproc.cc: Ditto.
* Makefile.in: Revert previous change which made a cygwin.din newer than a
version.h a warning rather than an error.
* Makefile.in (DLL_OFILES): Add sigfe.o. Remove reliance on cygwin.def from
cygwin0.dll dependency since dependence on sigfe.o implies that. Generate def
file on the fly using 'gendef'.
* configure.in: Don't auto-generate cygwin.def.
* configure: Regenerate.
* cygwin.din: Add SIGFE stuff where appropriate.
* dcrt0.cc (dll_crt0_1): Initialize cygwin tls early in process startup. Set
_main_tls to address of the main thread's cygwin tls.
* debug.h: Remove now unneeded WFSO and WFMO declarations.
* exceptions.cc (_last_thread): Define.
(set_thread_state_for_signals): New function.
(reset_thread_exception_for_signals): Ditto.
(init_thread_for_signals): Ditto.
(delete_thread_for_signals): Ditto.
(capture_thread_for_signals): Ditto.
(handle_exceptions): Set return address explicitly for exceptions prior to
calling sig_send.
(interrupt_on_return): Eliminate.
(setup_handler): Add preliminary implementation for dealing with
thread-specific signals by querying _main_tls.
(signal_exit): Use cygthread::main_thread_id instead of mainthread.id.
(call_signal_handler_now): For now, just handle the main thread.
* fork.cc (vfork): Save and restore main _my_tls.
* gendef: New file. Generates def file and sigfe.s file.
* gentls_offsets: New file. Generates offsets for perl to use in sigfe.s.
* how-signals-work.txt: Mention that info is obsolete.
* init.cc (dll_entry): Initialize cygwin tls storage here.
* miscfuncs.cc (low_priority_sleep): Make a C function for easier calling from
asm.
* perthread.h (vfork_save::tls): New element.
* signal.cc (nanosleep): Replace previous use of
sigframe.call_signal_handler_now with straight call to call_signal_handler_now.
(abort): Ditto.
* syscalls.cc (readv): Ditto.
* termios.cc (tcsetattr): Ditto.
* wait.cc (wait4): Ditto.
* sigproc.cc (sig_dispatch_pending): Ditto.
(sig_send): Ditto.
* sigproc.h: Declare call_signal_handler_now.
* thread.cc (pthread::thread_init_wrapper): Initialize cygwin tls. Remove
obsolete and unworking signal stuff.
* thread.h (verifyable_object::sigs): Eliminate.
(verifyable_object::sigmask): Eliminate.
(verifyable_object::sigtodo): Eliminate.
(verifyable_object::exit): Make attribute noreturn.
(verifyable_object::thread_init_wrapper): Ditto.
(pthread_null::exit): Ditto.
* winbase.h (__stackbase): Always define.
* winsup.h (low_priority_sleep): Declare as a "C" function.
* include/cygwin/version.h: Bump API version to reflect sigwait export.
* include/sys/queue.h: Protect SLIST_ENTRY from previous declaration.
* signal.cc (sigwait): Implement.
* select.cc (fhandler_base::ready_for_read): Add debugging output.
* devices.h: Define more device pointers via their storage.
* devices.in: Don't parse things like /dev/inet/tcp, as they really have no
meaning.
* devices.cc: Regenerate.
* gendevices: Set proper protection for output file.
* cygtls.h: New file.
* gendef: New file.
* gentls_offsets: New file.
* tlsoffsets.h: New file. Autogenerated.
* config/i386/longjmp.c: Remove. File subsumed by gendef output.
* config/i386/makefrag: Remove obsolete file.
* fhandler.cc: Remove spurious access_worker declaration.
* spawn.cc (spawnve): Make debugging output more accurate.
* cygwin-gperf: Remove.
* devices.cc: Remove.
(sig_send): Improve debugging output. Wait for pipe to be created before
trying to send to it. Call call_signal_handler_now if sending a signal to
myself.
* devices.shilka (device::parse): Restore check for tty in unit handling, but
without the previous typo.
* devices.cc: Regenerate.
* devices.h (DEV_CYGDRIVE_MAJOR): Change major number to one used by linux for
"user-mode virtual block device".
* sigproc.cc (sigpacket): New structure.
(sig_send): Fill out sigpacket structure to send to signal thread rather than
racily sending separate packets.
(wait_sig): Use sigpacket structure to receive info from signal sender.
* devices.gperf: New file.
* devices.shilka: New file.
* cygwin-gperf: New file.
* cygwin-shilka: New file.
* fhandler_fifo.cc: New file.
* fhandler_nodevice.cc : New file. Reorganize headers so that path.h precedes
fhandler.h throughout. Remove device argument and unit arguments from fhandler
constructors throughout. Remove pc arguments to fhandler functions and use
internal pc element instead, throughout. Use dev element in pc throughout.
Use major/minor elements rather than units and device numbers previously in
fhandler class. Use correct methods for fhandler file names rather than
directly accessing file name variables, throughout.
* Makefile.in (DLL_OFILES): Add devices.o, fhandler_fifo.o
* dcrt0.cc (dll_crt0_1): Call device::init.
* devices.h: Renumber devices based on more Linux-like major/minor numbers.
Add more devices. Declare standard device storage.
(device): Declare struct.
* dir.cc (opendir): Use new 'build_fh_name' to construct a fhandler_* type.
* dtable.cc (dtable::get_debugger_info): Ditto.
(cygwin_attach_handle_to_fd): Ditto.
(dtable::release): Remove special FH_SOCKET case in favor of generic
"need_fixup_before" test.
(dtable::init_std_file_from_handle): Use either build_fh_dev or build_fh_name
to build standard fhandler.
(dtable::build_fh_name): Renamed from dtable::build_fhandler_from_name. Move
out of dtable class. Don't accept a path_conv argument. Just build it here
and pass it to:
(build_fh_pc): Renamed from dtable::build_fhandler. Move out of dtable class.
Use intrinsic device type in path_conv to create new fhandler.
(build_fh_dev): Renamed from dtable::build_fhandler. Move out of dtable class.
Simplify arguments to just take new 'device' type and a name. Just return
pointer to fhandler rather than trying to insert into dtable.
(dtable::dup_worker): Accommodate above build_fh name changes.
(dtable::find_fifo): New (currently broken) function.
(handle_to_fn): Use strechr for efficiency.
* dtable.h: Reflect above build_fh name changes and argument differences.
(fhandler_base *&operator []): Return self rather than copy of self.
* fhandler.cc (fhandler_base::operator =): Use pc element to set normalized
path.
(fhandler_base::set_name): Ditto.
(fhandler_base::raw_read): Use method to access name.
(fhandler_base::write): Correctly use get_output_handle rather than get_handle.
(handler_base::device_access_denied): New function.
(fhandler_base::open): Eliminate pc argument and use pc element of
fhandler_base throughout.
(fhandler_base::fstat): Detect if device is based in filesystem and use
fstat_fs to calculate stat, if so.
(fhandler_base::fhandler_base): Eliminate handling of file names and, instead,
just free appropriate component from pc.
(fhandler_base::opendir): Remove path_conv parameter.
* fhandler.h: Remove all device flags.
(fhandler_base::pc): New element.
(fhandler_base::set_name): Change argument to path_conv.
(fhandler_base::error): New function.
(fhandler_base::exists): New function.
(fhandler_base::pc_binmode): New function.
(fhandler_base::dev): New function.
(fhandler_base::open_fs): New function.
(fhandler_base::fstat_fs): New function.
(fhandler_base::fstat_by_name): New function.
(fhandler_base::fstat_by_handle): New function.
(fhandler_base::isfifo): New function.
(fhandler_base::is_slow): New function.
(fhandler_base::is_auto_device): New function.
(fhandler_base::is_fs_special): New function.
(fhandler_base::device_access_denied): New function.
(fhandler_base::operator DWORD&): New operator.
(fhandler_base::get_name): Return normalized path from pc.
(fhandler_base::get_win32_name): Return windows path from pc.
(fhandler_base::isdevice): Renamed from is_device.
(fhandler_base::get_native_name): Return device format.
(fhandler_fifo): New class.
(fhandler_nodevice): New class.
(select_stuff::device_specific): Remove array.
(select_stuff::device_specific_pipe): New class element.
(select_stuff::device_specific_socket): New class element.
(select_stuff::device_specific_serial): New class element.
(select_stuff::select_stuff): Initialize new elements.
* fhandler_disk_file.cc (fhandler_base::fstat_by_handle): Move to base class
from fhandler_disk_file.
(fhandler_base::fstat_by_name): Ditto.
(fhandler_base::fstat_by_name): Ditto.
(fhandler_disk_file::open): Move most functionality into
fhandler_base::open_fs.
(fhandler_base::open_fs): New function.
(fhandler_disk_file::close): Move most functionality into
fhandler_base::close_fs.
(fhandler_base::close_fs): New function.
* fhandler_mem.cc (fhandler_dev_mem::open): Use device name in debugging
output.
* fhandler_socket.cc (fhandler_socket::set_connect_secret): Copy standard
urandom device into appropriate place.
(fhandler_socket::accept): Reflect change in fdsock return value.
* fhandler_tty.cc: See "throughouts" above.
* net.cc: Accommodate fdsock change throughout.
(fdsock): Return success or failure, accept fd argument and device argument.
* path.cc (symlink_info::major): New element.
(symlink_info::minor): New element.
(symlink_info::parse_device): Declare new function.
(fs_info::update): Accommodate changes in path_conv class.
(path_conv::fillin): Ditto.
(path_conv::return_and_clear_normalized_path): Eliminate.
(path_conv::set_normalized_path): New function.
(path_conv::path_conv): Set info in dev element. Use path_conv methods Check
for FH_FS rather than FH_BAD to indicate when to fill in filesystem stuff.
where appropriate rather than direct access. Use set_normalized_path to set
normalized path.
(windows_device_names): Eliminate.
(get_dev): Ditto.
(get_raw_device_number): Ditto.
(get_device_number): Ditto.
(win32_device_name): Call new device name parser to do most of the heavy
lifting.
(mount_info::conv_to_win32_path): Fill in dev field as appropriate.
(symlink_worker): Handle new device files.
(symlink_info::check): Ditto.
(symlink_info::parse_device): Define new function.
* path.h (executable_states): Move here from fhandler.h.
(fs_info): Rename variables to *_storage and create methods for accessing same.
(path_conv): Add dev element, remove devn and unit and adjust inline methods to
accommodate.
(set_normalized_path): Declare new function.
* pinfo.cc (_pinfo::commune_recv): Add broken support for handling fifos.
(_pinfo::commune_send): Ditto.
* pipe.cc (fhandler_pipe::close): check for existence of handle before closing
it.
(handler_pipe::create): Rename from make_pipe. Change arguments to accept
fhandler_pipe array. Accommodate fifos.
(pipe): Rework to deal with fhandler_pipe::create changes.
(_pipe): Ditto.
* select.cc: Use individual device_specific types throughout rather than
indexing with obsolete device number.
(set_bits): Use is_socket call rather than checking device number.
* shared_info.h (CURR_MOUNT_MAGIC): Update.
(conv_to_win32_path): Reflect addition of device argument.
* syscalls.cc (mknod_worker): New function.
(open): Use build_fh_name to build fhandler.
(chown_worker): Detect if this is an 'auto' device rather than an on-filesystem
device and handle appropriately.
(chmod_device): New function.
(chmod): Detect if this is an 'auto' device rather than an on-filesystem device
and handle appropriately. Use chmod_device to set mode of in-filesystem
devices.
(stat_worker): Eliminate path_conv argument. Call build_fh_name to construct
fhandler. Use fh->error() rather than pc->error to detect errors in fhandler
construction.
(access_worker): New function pulled from access. Accommodate in-filesystem
devices.
(access): Use access_worker.
(fpathconf): Detect if this is an 'auto' device rather than an on-filesystem
device and handle appropriately.
(mknod_worker): New function.
(mknod32): New function.
(chroot): Free normalized path -- assuming it was actually cmalloced.
* tty.cc (create_tty_master): Tweak for new device class.
(tty::common_init): Ditto.
* winsup.h (stat_worker): Remove.
(symlink_worker): Declare.
* exceptions.cc (set_process_mask): Just call sig_dispatch_pending and don't
worry about pending_signals since sig_dispatch_pending should always do the
right thing now.
(sig_handle): Reorganize SIGCONT handling to more closely conform to SUSv3.
* pinfo.h: Move __SIG enum to sigproc.h.
(PICOM_FIFO): New enum element.
(_pinfo): Remove 'thread2signal' stuff throughout class.
(_pinfo::commune_send): Make varargs.
(_pinfo::sigtodo): Eliminate.
(_pinfo::thread2signal): Ditto.
* signal.cc (kill_worker): Eliminate call to setthread2signal.
* sigproc.cc (local_sigtodo): Eliminate.
(getlocal_sigtodo): Ditto.
(sigelem): New class.
(pending_signals): New class.
(sigqueue): New variable, start of sigqueue linked list.
(sigcatch_nonmain): Eliminate.
(sigcatch_main): Eliminate.
(sigcatch_nosync): Eliminate.
(sigcomplete_nonmain): Eliminate.
(pending_signals): Eliminate.
(sig_clear): Call signal thread to clear pending signals, unless already in
signal thread.
(sigpending): Call signal thread to get pending signals.
(sig_dispatch_pending): Eliminate use of pending_signals and just check
sigqueue.
(sigproc_terminate): Eliminate all of the obsolete semaphore stuff. Close
signal pipe handle.
(sig_send): Eliminate all of the obsolete semaphore stuff and use pipe to send
signals.
(getevent): Eliminate.
(pending_signals::add): New function.
(pending_signals::del): New function.
(pending_signals::next): New function.
(wait_sig): Eliminate all of the obsolete semaphore stuff. Use pipe to
communicate and maintain a linked list of signals.
* sigproc.h: Move __SIG defines here. Add __SIGPENDING.
(sig_dispatch_pending): Remove "C" specifier.
(sig_handle): Accept a mask argument.
* thread.cc: Remove signal handling considerations throughout.
(winpids::winpids): Rejigger to set pinfo_access.
* pinfo.cc (winpids::add): Try to open shared memory region with supplied
pinfo_access first, then default to readonly.
* fhandler_termios.cc (tty_min::kill_pgrp): When getting list of pids to work
with, suggest opening with PID_MAP_RW.
* signal.cc (kill_pgrp): Ditto.
* sigproc.cc (sig_send): Perform a write check on todo prior to attempting to
increment it. Return EACCES if we can't write to it.
set.
* exceptions.cc (sig_handle_tty_stop): Don't reset sigCONT event since it is
reset automatically.
* fork.cc (fork): Remove obsolete usage of PID_SPLIT_HEAP.
* include/sys/cygwin.h: Ditto.
* sigproc.cc (sig_send): Use sigframe init method to set frame since it checks
for previous ownership of the frame.
* sigproc.h (sigframe::init): Accept an "is_exception" argument.
become unmasked.
* sigproc.cc (pending_signals): Flip back to a global.
(wait_sig): Don't set pending signals when there is an armed semaphore or
signal is blocked.
* shared.cc (shared_info::initialize): Add a username parameter for user-mode
mounts. Reorganize to try to avoid startup race.
(memory_init): Move some stuff into shared_info::initialize.
* shared_info.h (shared_info::initialize): Change declaration.
(CURR_SHARED_MAGIC): Update.
Christopher Faylor
Corinna Vinschen
Pierre Humblet