* pinfo.h (_pinfo::exists): Declare "new" function.
(_pinfo::kill): Ditto.
* fhandler_termios.cc (tty_min::kill_pgrp): Use _pinfo::exists rather than
proc_exists.
* pinfo.cc (pinfo::init): Ditto. Don't do a low_priority_sleep(0) when looping
to find exec'ed procinfo.
(pinfo::release): Be more careful about unmapping and closing.
* signal.cc (_pinfo::kill): Rename from kill_worker. Accommodate entry into
_pinfo class.
(kill0): Use _pinfo::kill rather than kill_worker.
(kill_pgrp): Ditto. Use _pinfo::exists rather than proc_exists.
* sigproc.cc (_pinfo::exists): Rename from proc_exists.
(pid_exists): Use _pinfo::exists rather than proc_exists.
(remove_proc): Ditto.
* sigproc.h (proc_exists): Delete declaration.
(cygthread::terminate_thread): Eliminat racy code which reset ev and
thread_sync. Remove a few nonsensical inuse checks. Exit at the bottom.
(cygthread::detach): Rewrite to again try to ensure that we don't say we're
signalled when we are not signalled.
* fhandler.cc (fhandler_base::raw_read): Revert to signalling read success
quickly.
* pipe.cc (fhandler_pipe::close): Use base method to close handle.
* sigproc.h (WAIT_SIG_PRIORITY): Just trundle along at normal priority to allow
the pipe thread to do its thing if possible.
* pinfo.h (pinfo::zap_cwd): Declare new function.
(pinfo::zap_cwd): Move 'cd out of the way code' here.
(pinfo::exit): Use it here.
* spawn.cc (spawn_guts): And here.
itself here, to avoid a race.
(cygthread::release): Clear more stuff. Add a diagnostic for an internal
error.
* cygthread.h (auto_release): New function.
* pinfo.h (pinfo::remember): Add an argument to denote whether child is
detached.
* fork.cc (fork_parent): Reflect change in arguments to pinfo::remember.
* pinfo.cc (_pinfo::exit): Signal exit more forcibly.
(proc_waiter): Use cygthread::auto_release to signify that cygthread::stub
should release the thread. This should avoid a race.
(pinfo::alert_parent): Don't signify an error when wr_proc_pipe == NULL.
* sigproc.cc (proc_subproc): Add support for PROC_DETACHED_CHILD.
* sigproc.h: Ditto.
* spawn.cc (spawn_guts): Specify whether child is detached or not when calling
pinfo::remember.
* fork.cc (fork_parent): Set parent_wr_proc.
* pinfo.cc (set_myself): Close child_proc_info->parent_wr_proc if it exists
rather than trying to get value from parent _pinfo.
* pinfo.h (enum parent_aleter): New enum.
(pinfo::alert_parent): Declare as returning a value.
(pinfo::parent_alive): New function.
* pinfo.cc (pinfo::alert_parent): Set wr_proc_pipe to invalid non-NULL value
when parent disappears. Return success of operation.
(proc_waiter): Use __ALERT_* enum for control since these are not really
signals. Implement __ALERT_ALIVE.
* sigproc.cc (my_parent_is_alive): Eliminate.
* sigproc.h (my_parent_is_alive): Ditto for declaration.
(__SIGREPARENT): Eliminate.
* dcrt0.cc (dll_crt0_0): Remove hexec_proc stuff.
* fork.cc (fork_child): Remove call to pinfo_fixup_after_fork.
* pinfo.cc (set_myself): Close and zero pid_handle if set.
(pinfo_fixup_after_fork): Delete.
(proc_waiter): Don't close vchild.hProcess here. Do that when we are remove
the vchild from procs. Save hProcess as pid_handle only on first reparent
operation.
(pinfo::wait): Don't set pid_handle here.
(pinfo::alert_parent): Always try to send signal. If unsuccessful then close
and zero wr_proc_pipe.
* pinfo.h (pinfo::pinfo): Make sure that appropriate parts of the class are
zeroed on construction.
(pinfo::alert_parent): Take char argument.
(pinfo_fixup_after_fork): Delete declaration.
(hexec_proc): Ditto.
* sigproc.cc (remove_proc): Close pid_handle and hProcess if appropriate.
* spawn.cc (spawn_guts): Set cygheap->pid_handle on first exec.
* cygheap.h (init_cygheap::pid_handle): New element.
* pinfo.cc (set_myself): Clear previously existing cygheap->pid_handle when a
new process has been started.
(pinfo::wait): Make sure that a handle to the newly forked/spawned process is
kept around so that the pid will not be reused.
* pinfo.h (_pinfo::pid_handle): Move.
(pinfo::pid_handle): to here.
* spawn.cc (spawn_guts): Create a pid_handle in cygheap prior to spawning to
ensure that the pid does not get reused during the lifetime of the "cygwin
pid".
* pinfo.h (pinfo::alert_parent): New function.
* exceptions.cc (sig_handle_tty_stop): Use alert_parent to send "signals" to
parent.
* fork.cc (fork_parent): Don't close pi.hProcess. Let the waiter thread do
that.
* pinfo.cc (proc_waiter): Detect case where process exits without setting the
exit code and use value from GetExitCodeProcess. Reluctantly implement
__SIGREPARENT.
(pinfo::alert_parent): Define.
* sigproc.h (__SIGREPARENT): New enum.
* spawn.cc (spawn_guts): Send reparent signal to parent on exec. Always create
process in suspended state to avoid races. Remove cygthread.h in favor of
cygtls.h throughout since cygtls now includes cygthread.h. Eliminate
ppid_handle usage throughout.
* child_info.h: Regenerate magic number
(child_info): Remove pppid_handle.
* cygthread.h (cygthread::release): New method. Frees thread without waiting.
* cygthread.cc (cygthread::stub): Set _ctinfo in _mytls to point to information
for executing thread. Don't call SetEvent if thread is no longer in use.
(cygthread::simplestub): Ditto.
* cygtls.h (_cygtls::_ctinfo): New element contains pointer to information
about executing cygthread, if any.
* dcrt0.cc: Remove last vestiges of per_thread stuff.
(dll_crt0_0): Ditto. Remove accommodation for ppid_handle.
(do_exit): Remove obsolete reparenting test.
(_exit): Exit with a more SUSv3-like exit value.
* dtable.cc (dtable::stdio_init): Check for myself->cygstarted rather than
myself->ppid_handle to see if we were started by a cygwin process.
* exceptions.cc (open_stackdumpfile): Ditto.
(handle_exceptions): Ditto.
(ctrl_c_handler): Ditto.
(sig_handle_tty_stop): Ditto. Let parent send signal to itself on STOP.
(sigpacket::process): Comment out vfork test.
(signal_exit): Use more SUSv3-like exit value on signal.
* external.cc (fillout_pinfo): Don't set hProcess.
* fork.cc: Remove VFORK cruft.
(per_thread::set): Delete.
(fork_child): Remove perthread stuff.
(fork_parent): Remove obsolete subproc_init. Accommodate new method for
tracking subprocesses.
* pinfo.cc (set_myself): Accommodate new pinfo/_pinfo layout. Set some things
here that used to be set in wait_sig.
(_pinfo::exit): Set exitcode here. Close process pipe.
(_pinfo::commune_send): Accommodeate new pinfo/_pinfo layout.
(proc_waiter): New function. Waits, in a thread for subprocess to go away.
(pinfo::wait): New function. Initialization for proc_waiter.
* pinfo.h (_pinfo::exitcode): New element.
(_pinfo::cygstarted): Ditto.
(_pinfo::wr_proc_pipe): Ditto.
(_pinfo::ppid_handle): Delete.
(_pinfo::hProcess): Delete.
(_pinfo::lock): Delete.
(pinfo::hProcess): New element.
(pinfo::lock): Ditto.
(pinfo::wait): Declare new function.
(pinfo::preserve): Define new function.
* sigproc.cc: Remove old stuff from wait_subproc thread based method.
(zombies): Remove.
(procs): New.
(my_parent_is_alive): Just check that the parent pid exists.
(mychild): Just use pinfo methods to determine if child is mine.
(proc_subproc): Revamp PROC_ADDCHILD to use pinfo::wait. Remove
PROC_CHILDTERMINATED logic. Use different method to remove processes from list
when SIGCHLD == SIG_IGN.
(proc_terminate): Gut.
(subproc_init): Delete.
(init_child_info): Remove setting of pppid_handle.
(checkstate): Revamp to only scan procs array.
(remove_proc): Rename from remove_zombie. Don't close hProcess or pid_handle.
Don't release memory if it's myself.
(stopped_or_terminated): Change logic to handle new consolidated proc/zombie
array.
(wait_subproc): Delete.
* sigproc.h: Remove obsolete EXIT_* defines.
(subproc_init): Remove declaration.
* spawn.cc (spawn_guts): Remove reparenting stuff. Use standard wait logic to
wait for child if started from a non-cygwin process.
* tlsoffsets.h: Regenerate.
* tty.cc (tty_init): Check for myself->cygstarted rather than
myself->ppid_handle to see if we were started by a cygwin process.
* include/sys/signal.h (external_pinfo::exitcode): Replace hProcess.
* include/sys/wait.h (WCOREDUMP): Define.
* fhandler_tty.cc (fhandler_tty_slave::read): Add debugging output for timeout
case.
* signal.cc (abort): Flag that we are exiting with the ABORT signal.
starting.
* child_info.h (init_child_info): Remove pid argument from declaration.
* cygheap.h (init_cygheap::pid): New element.
* dcrt0.cc (dll_crt0_0): Eliminate handling of now-noexistent cygpid parameter
in child_info struct. Set forkee to 'true' rather than cygpid since the pid
value was never used.
(dll_crt0_1): Ditto.
(_dll_crt0): Ditto.
* fork.cc (fork_child): Don't wait for sigthread. This is handled in the fork
call now.
(fork_parent): Remove obsolete pid argument from init_child_info call. Don't
do anything special with cygpid when DEBUGGING.
(fork): Delay all signals during fork.
(fork_init): Don't do anything special when DEBUGGING.
* pinfo.cc (set_myself): Remove pid parameter. Use new pid field in cygheap.
(pinfo_init): Don't pass pid argument to set_myself.
* sigproc.cc (sig_send): Wait for dwProcessId to be non-zero as well as
sendsig.
(init_child_info): Eliminate handling of pid.
(wait_sig): Implement method to temporarily hold off sending signals.
* sigproc.h (__SIGHOLD): New enum.
(__SIGNOHOLD): Ditto.
* spawn.cc (spawn_guts): Remove obsolete pid argument from init_child_info
call.
handling whenever a '\' is detected.
* signal.cc (sigaction): Make strace output more informative.
* sigproc.cc (pending_signals::add): Just index directly into signal array
rather than treating the array as a heap.
(pending_signals::del): Ditto.
(wait_sig): Don't send signal if we already have a similar signal queued.
* sigproc.h (call_signal_handler_now): Remove obsolete declaration.
(_cygtls::wq): Declare.
* cygtls.cc (_cygtls::fixup_after_fork): Clear wq.thread_ev to avoid using an
invalid event handle in forked process.
* dcrt0.cc (waitq_storage): Delete.
(threadstuff): Remove waitq_storage.
* perthread.h (per_thread_waitq): Delete.
(waitq_storage): Delete declaration.
* sigproc.cc (sigproc_init): Remove perthread waitq consideration.
* sigproc.h (waitq): Delete declaration.
* wait.cc (wait4): Use _my_tls waitq structure rather than per_thread.
* cygtls.h (_cygtls::newmask): Delete member.
(_cygtls::deltamask): New member.
* gendef (_sigdelayed): Replace the call to set_process_mask by a call to
set_process_mask_delta.
* exceptions.cc (handle_sigsuspend): Do not filter tempmask. Or
SIG_NONMASKABLE in deltamask as a flag.
(_cygtls::interrupt_setup): Set deltamask only.
(set_process_mask_delta): New function.
(_cygtls::call_signal_handler): Replace the first call to set_process_mask by a
call to set_process_mask_delta.
* tlsoffsets.h: Regenerate.
* cygtls.h (_cygtls::call_signal_handler): Rename from call_signal_handler_now.
(_cygtls::push): Make second argument mandatory.
(_cygtls::fixup_after_fork): Declare new function.
(_cygtls::lock): Ditto.
* cygtls.cc (_cygtls::fixup_after_fork): Define new function.
* dcrt0.cc (cygwin_finished_initializing): Define as bool.
(alloc_stack): Use _tlstop rather than arbitrary variable in probably vain
attempt to avoid strange fork problem on CTRL-C.
(dll_crt0_0): Remove obsolete winpids::init call.
* dll_init.cc (dll_dllcrt0): Detect forkee condition as equivalent to
initializing.
* winsup.h (cygwin_finished_initializing): Declare as bool.
* exceptions.cc (handle_exceptions): Rely on cygwin_finished_initializing to
determine how to handle exception during process startup.
(_cygtls::call_signal_handler): Rename from call_signal_handler_now.
(_cygtls::interrupt_now): Fill in second argument to push.
(signal_fixup_after_fork): Eliminate.
(setup_handler): Initialize locked to avoid potential inappropriate unlock.
Resume thread if it has acquired the stack lock.
(ctrl_c_handler): Just exit if ctrl-c is hit before cygiwn has finished
initializing.
* fork.cc (sync_with_child): Don't call abort since it can cause exit
deadlocks.
(sync_with_child): Change debugging output slightly.
(fork_child): Set cygwin_finished_initializing here. Call _cygtls fork fixup
and explicitly call sigproc_init.
(fork_parent): Release malloc lock on fork failure.
(vfork): Call signal handler via _my_tls.
* sigproc.cc (sig_send): Ditto.
* syscalls.cc (readv): Ditto.
* termios.cc (tcsetattr): Ditto.
* wait.cc (wait4): Ditto.
* signal.cc (nanosleep): Ditto.
(abort): Ditto.
(kill_pgrp): Avoid killing self if exiting.
* sync.cc (muto::acquire): Remove (temporarily?) ill-advised exiting_thread
check.
* gendef (_sigfe): Be more agressive in protecting stack pointer from other
access by signal thread.
(_cygtls::locked): Define new function.
(_sigbe): Ditto.
(_cygtls::pop): Protect edx.
(_cygtls::lock): Use guaranteed method to set eax to 1.
(longjmp): Aggressively protect signal stack.
* miscfuncs.cc (low_priority_sleep): Reduce "sleep time" for secs == 0.
* pinfo.cc (winpids::set): Counterintuitively use malloc's lock to protect
simultaneous access to the pids list since there are pathological conditions
which can cause malloc to call winpid.
(winpids::init): Eliminate.
* pinfo.h (winpids::cs): Eliminate declaration.
* pinfo.h (winpids::init): Eliminate definition.
version.
* debug.cc (__set_errno): Ditto.
* exceptions.cc (handle_sigsuspend): Remove spurious sig_dispatch_pending call.
(set_signal_mask): When there seem to be pending signals to dispatch, tell
signal_dispatch_pending/sig_send not to specifically call any handlers.
* sigproc.h (sig_dispatch_pending): Change declaration to void.
* sigproc.cc (sig_dispatch_pending): Change definition to void. Take an
argument to determine whether to tell sig_send to wait for handler to be
called.
* sigproc.cc (sig_send): Don't call signal handler when sig == __SIGFLUSHFAST.
(wait_sig): Honor __SIGFLUSHFAST. Guard against sigpacket::process nuking
si_signo.
* sigproc.h (__SIGFLUSHFAST): Define new special signal.
(sig_dispatch_pending): Change declaration to void. Take optional boolean
argument.
* fork.cc (vfork): Add debugging output.
* exceptions.cc (setup_handler): Improve debugging output.
(call_signal_handler_now): Remove ill-advised debugger call.
* sigproc.cc (sigcomplete_main): Delete.
(sig_send): Honor FIXME and avoid using main thread's completion event for
everything or suffer races.
(pending_signals::add): Default stored mask to current process mask rather than
mask at time of signal send.
(wait_sig): Add debugging output.
* sigproc.h (sigpacket::mask_storage): Delete.
TIOCSWINSZ. It is not an error for ioctl_request_event to be missing.
* sigproc.cc (pending_signals::save): New function.
(pending_signals::restore): Ditto.
(sig_clear): Save/restore current queue pointer.
(wait_sig): Delete signals marked as such.
* sigproc.h (__SIGDELETE): New enum.
* cygwin.din: Make clock SIGFE. Add clock_gettime, sigwaitinfo, timer_create,
timer_delete, timer_settime.
* include/cygwin/version.h: Reflect above additions.
* fork.cc (fork_child): Call fixup_timers_after_fork.
* signal.cc (sigwait): Remove unused variable.
* timer.cc: New file.
(clock_gettime): Define new function.
(timer_tracker): Define new struct used by timer functions.
(timer_tracker::timer_tracker): New function.
(to_us): New function.
(timer_thread): New function.
(timer_tracker::settime): New function.
(timer_create): New function.
(timer_settime): New function.
(timer_delete): New function.
(fixup_timers_after_fork): New function.
* cygthread.cc: Bump thread count.
* signal.cc (sigwaitinfo): Define new function.
(sigwait): Redefine based on sigwaitinfo.
* include/cygwin/signal.h (sigwaitinfo): Declare.
(sigwait): Ditto.
* dtable.cc (dtable::vfork_parent_restore): Avoid double close of ctty when
ctty == ctty_on_hold.
* cygtls.h (_threadinfo::threadkill): New element.
(_threadinfo::set_threadkill): Declare new function.
(_threadinfo::reset_threadkill): Declare new function.
* dcrt0.cc (dcrt0_1): Call here so that it will be possible to attach to
running process with #(*& Windows Me/9x.
(initial_env): Try to initialize strace if uninitialized.
* gendef: Don't zero signal if threadkill is set since that will happen in the
called function.
* signal.cc (sigwait): Ensure cleanup in error conditions.
* sigproc.cc (sig_send): Clear packet mask storage.
(wait_subproc): Fill in child exit code in siginfo_t structure.
* thread.cc (pthread_kill): Set threadkill flag.
* tlsoffsets.h: Regenerate. Throughout, use siginfo_t to fill out all signal
information for "kernel" signals.
* cygtls.h (_threadinfo::set_siginfo): Declare new function.
* cygtls.cc (_threadinfo::set_siginfo): Define new function.
* dcrt0.cc (do_exit): Accommodate siginfo_t considerations.
* exceptions.cc (handle_exceptions): Ditto.
(sig_handle_tty_stop): Ditto.
(ctrl_c_handler): Use killsys() to send signal.
(sigpacket::process): Rename from sig_handle. Use siginfo_t field from
sigpacket for everything.
(tty_min::kill_pgrp): Accommodate siginfo_t considerations.
(fhandler_termios::bg_check): Ditto.
* fhandler_tty.cc (fhandler_tty_slave::ioctl): Use killsys() to send signal.
* signal.cc (kill_worker): Rewrite to use siginfo_t second argument.
(kill_pgrp): Ditto.
(kill0): Define new function pulled from kill().
(kill): Rewrite as frontend to kill0.
(killsys): Define new function.
* sigproc.cc (sigelem): Eliminate.
(sigpacket): Move to sigproc.h. Subsume sigelem.
(pending_signals): Use sigpacket rather than sigelem for everything.
(sig_clear): Ditto.
(wait_sig): Ditto.
(sig_send): Rewrite to use siginfo_t argument.
(sig_send): New function wratpper to sig_send with siginfo_t argument.
(wait_subproc): Accommodate siginfo_t considerations.
* thread.cc (pthread_kill): Ditto.
* sigproc.h (sigpacket): Move here.
(sigpacket::process): Declare "new" function.
(sig_handle): Eliminate declaration.
(sig_send): Declare with new paramaters.
(killsys): Declare new function.
(kill_pgrp): Declare.
* winsup.h: Move some signal-specific stuff to sigproc.h.
* include/cygwin/signal.h: Tweak some siginfo_t stuff.
calculated mask in debugging output.
* sigproc.h (set_signal_mask): Reflect above change in declaration.
* path.cc (mount_item::build_win32): Take path apart before feeding it to
fnmunge. Throughout, change use of _reent_winsup()-> to _my_tls.locals.
instead. Throughout, remove obsolete MT_SAFE/_CYG_THREAD_FAILSAFE
considerations. Througout, add cygtls.h include.
* Makefile.in (DLL_OFILES): Add cygtls.o. Add some more objects to the
-fomit-frame-pointer list.
* acconfig.h: Remove obsolete settings.
* config.h.in: Ditto.
* bsdlib.cc: Add cygtls.h include.
* configure.in: Remove --enable-extra-threadsafe-checking.
* configure: Regenerate.
* cygtls.h (_local_storage): New struct renamed from _winsup_t (sic).
(_threadinfo:local_clib): Add new field.
(_threadinfo::locals): Ditto.
(_threadinfo::init_thread): Accept second _reent * argument.
(_threadinfo::call): Define as regparm.
(CYGTLS_PADSIZE): Remove unnecessary slop.
(_getreent): Define as a macro.
* thread.h: Remove _CYG_THREAD_FAILSAFE and MT_SAFE stuff.
(_winsup_t): Move to cygtls.h.
(ResourceLocks::ResourceLocks): Eliminate empty constructor.
(MTinterface::reents): Eliminate.
(MTinterface::thread_self_key): Eliminate.
(MTinterface::MTinterface): Eliminate.
* dcrt0.cc: Include stdio.h for _impure_ptr initialization.
(do_global_ctors): Remove run_ctors_p (sic) considerations. Don't call atexit
here.
(__main): Initialize destructors for user here.
(dll_crt0_1): Accept a dummy argument. Don't call init_thread here. Don't set
_impure_ptr here. Call do_global_ctors after more things have been
initialized.
(_dll_crt0): Define zeros buffer as max of needed size of CYGTLS_PADSIZE so
that it can be used for two purposes while minimizing stack usage. Initialize
_impure_ptr specifically, for speed. Call dll_crt0_1 with buffer argument.
(cygwin_dll_init): Call dll_crt0_1 with dummy argument.
* dtable.cc (dtable::find_unused_handle): Remove call to AssertResourceOwner.
* exceptions.cc: Move _threadinfo stuff to new file.
* cygtls.cc: New file.
* gentls_offsets: Accommodate increasing complexity of cygtls.h.
* hires.h (hires_base::~hires_base): Remove.
* init.cc (dll_entry): Remove setting of reents.
* thread.cc: Remove syslog.h include.
(__getreent): Simplify to use _my_tls.
(_reent_winsup): Delete.
(AssertResourceOwner): Delete.
(MTinterface::Init): Remove setting of _clib and _winsup, with all that
entails.
(MTinterface::fixup_after_fork): Ditto.
(pthread::thread_init_wrapper): Ditto. Also remove call to
set_tls_self_pointer.
(pthread::set_tls_self_pointer): Eliminate.
(pthread::get_tls_self_pointer): Just return _my_tls.tid;
(__reent_t::init_clib): Eliminate.
* tlsoffsets.h: Regenerate.
throughout.
* tty.cc (tty::common_init): Remove call to SetKernelObjectSecurity and edit
some comments.
* cygheap.h (init_cygheap::ctty): Add new element.
* devices.in (device::parse): Remove special handling for /dev/tty.
* devices.cc: Regenerate.
* dtable.cc (build_fh_pc): Don't reset /dev/tty device. Let the device opener
do that.
* fhandler_termios.cc (tty_min::set_ctty): Redefine to _pinfo class.
* fhandler_tty.cc (fhandler_tty_common::set_close_on_exec): Avoid setting
noninherit flag for ctty.
* tty.h: Move BOOLs to bools.
(tty_min::set_ctty): Redeclare to _pinfo class.
* pinfo.cc (_pinfo::set_ctty): Define new function based on tty_min::set_ctty.
Change first argument from tty number to tty_min class.
* pinfo.h (_pinfo::set_ctty): Declare.
* fhandler_console.cc (fhandler_console::get_tty_stuff): Reflect move of
set_ctty to _pinfo class.
* fhandler_tty.cc (fhandler_tty_slave::open): Treat FH_TTY specially. Use
saved cygheap value if it exists. Otherwise convert to real device and save on
first time open.
(fhandler_tty_common::dup): Potentially set controlling tty if duping a slave
tty.
* syscalls.cc (setsid): Close controlling tty in cygheap.
* tty.cc: Change some BOOLs to bools.
* Makefile.in (DLL_OFILES): Add sigfe.o. Remove reliance on cygwin.def from
cygwin0.dll dependency since dependence on sigfe.o implies that. Generate def
file on the fly using 'gendef'.
* configure.in: Don't auto-generate cygwin.def.
* configure: Regenerate.
* cygwin.din: Add SIGFE stuff where appropriate.
* dcrt0.cc (dll_crt0_1): Initialize cygwin tls early in process startup. Set
_main_tls to address of the main thread's cygwin tls.
* debug.h: Remove now unneeded WFSO and WFMO declarations.
* exceptions.cc (_last_thread): Define.
(set_thread_state_for_signals): New function.
(reset_thread_exception_for_signals): Ditto.
(init_thread_for_signals): Ditto.
(delete_thread_for_signals): Ditto.
(capture_thread_for_signals): Ditto.
(handle_exceptions): Set return address explicitly for exceptions prior to
calling sig_send.
(interrupt_on_return): Eliminate.
(setup_handler): Add preliminary implementation for dealing with
thread-specific signals by querying _main_tls.
(signal_exit): Use cygthread::main_thread_id instead of mainthread.id.
(call_signal_handler_now): For now, just handle the main thread.
* fork.cc (vfork): Save and restore main _my_tls.
* gendef: New file. Generates def file and sigfe.s file.
* gentls_offsets: New file. Generates offsets for perl to use in sigfe.s.
* how-signals-work.txt: Mention that info is obsolete.
* init.cc (dll_entry): Initialize cygwin tls storage here.
* miscfuncs.cc (low_priority_sleep): Make a C function for easier calling from
asm.
* perthread.h (vfork_save::tls): New element.
* signal.cc (nanosleep): Replace previous use of
sigframe.call_signal_handler_now with straight call to call_signal_handler_now.
(abort): Ditto.
* syscalls.cc (readv): Ditto.
* termios.cc (tcsetattr): Ditto.
* wait.cc (wait4): Ditto.
* sigproc.cc (sig_dispatch_pending): Ditto.
(sig_send): Ditto.
* sigproc.h: Declare call_signal_handler_now.
* thread.cc (pthread::thread_init_wrapper): Initialize cygwin tls. Remove
obsolete and unworking signal stuff.
* thread.h (verifyable_object::sigs): Eliminate.
(verifyable_object::sigmask): Eliminate.
(verifyable_object::sigtodo): Eliminate.
(verifyable_object::exit): Make attribute noreturn.
(verifyable_object::thread_init_wrapper): Ditto.
(pthread_null::exit): Ditto.
* winbase.h (__stackbase): Always define.
* winsup.h (low_priority_sleep): Declare as a "C" function.
* include/cygwin/version.h: Bump API version to reflect sigwait export.
* include/sys/queue.h: Protect SLIST_ENTRY from previous declaration.
* signal.cc (sigwait): Implement.
* select.cc (fhandler_base::ready_for_read): Add debugging output.
* devices.h: Define more device pointers via their storage.
* devices.in: Don't parse things like /dev/inet/tcp, as they really have no
meaning.
* devices.cc: Regenerate.
* gendevices: Set proper protection for output file.
* cygtls.h: New file.
* gendef: New file.
* gentls_offsets: New file.
* tlsoffsets.h: New file. Autogenerated.
* config/i386/longjmp.c: Remove. File subsumed by gendef output.
* config/i386/makefrag: Remove obsolete file.
* fhandler.cc: Remove spurious access_worker declaration.
* spawn.cc (spawnve): Make debugging output more accurate.
* cygwin-gperf: Remove.
* devices.cc: Remove.
* devices.gperf: New file.
* devices.shilka: New file.
* cygwin-gperf: New file.
* cygwin-shilka: New file.
* fhandler_fifo.cc: New file.
* fhandler_nodevice.cc : New file. Reorganize headers so that path.h precedes
fhandler.h throughout. Remove device argument and unit arguments from fhandler
constructors throughout. Remove pc arguments to fhandler functions and use
internal pc element instead, throughout. Use dev element in pc throughout.
Use major/minor elements rather than units and device numbers previously in
fhandler class. Use correct methods for fhandler file names rather than
directly accessing file name variables, throughout.
* Makefile.in (DLL_OFILES): Add devices.o, fhandler_fifo.o
* dcrt0.cc (dll_crt0_1): Call device::init.
* devices.h: Renumber devices based on more Linux-like major/minor numbers.
Add more devices. Declare standard device storage.
(device): Declare struct.
* dir.cc (opendir): Use new 'build_fh_name' to construct a fhandler_* type.
* dtable.cc (dtable::get_debugger_info): Ditto.
(cygwin_attach_handle_to_fd): Ditto.
(dtable::release): Remove special FH_SOCKET case in favor of generic
"need_fixup_before" test.
(dtable::init_std_file_from_handle): Use either build_fh_dev or build_fh_name
to build standard fhandler.
(dtable::build_fh_name): Renamed from dtable::build_fhandler_from_name. Move
out of dtable class. Don't accept a path_conv argument. Just build it here
and pass it to:
(build_fh_pc): Renamed from dtable::build_fhandler. Move out of dtable class.
Use intrinsic device type in path_conv to create new fhandler.
(build_fh_dev): Renamed from dtable::build_fhandler. Move out of dtable class.
Simplify arguments to just take new 'device' type and a name. Just return
pointer to fhandler rather than trying to insert into dtable.
(dtable::dup_worker): Accommodate above build_fh name changes.
(dtable::find_fifo): New (currently broken) function.
(handle_to_fn): Use strechr for efficiency.
* dtable.h: Reflect above build_fh name changes and argument differences.
(fhandler_base *&operator []): Return self rather than copy of self.
* fhandler.cc (fhandler_base::operator =): Use pc element to set normalized
path.
(fhandler_base::set_name): Ditto.
(fhandler_base::raw_read): Use method to access name.
(fhandler_base::write): Correctly use get_output_handle rather than get_handle.
(handler_base::device_access_denied): New function.
(fhandler_base::open): Eliminate pc argument and use pc element of
fhandler_base throughout.
(fhandler_base::fstat): Detect if device is based in filesystem and use
fstat_fs to calculate stat, if so.
(fhandler_base::fhandler_base): Eliminate handling of file names and, instead,
just free appropriate component from pc.
(fhandler_base::opendir): Remove path_conv parameter.
* fhandler.h: Remove all device flags.
(fhandler_base::pc): New element.
(fhandler_base::set_name): Change argument to path_conv.
(fhandler_base::error): New function.
(fhandler_base::exists): New function.
(fhandler_base::pc_binmode): New function.
(fhandler_base::dev): New function.
(fhandler_base::open_fs): New function.
(fhandler_base::fstat_fs): New function.
(fhandler_base::fstat_by_name): New function.
(fhandler_base::fstat_by_handle): New function.
(fhandler_base::isfifo): New function.
(fhandler_base::is_slow): New function.
(fhandler_base::is_auto_device): New function.
(fhandler_base::is_fs_special): New function.
(fhandler_base::device_access_denied): New function.
(fhandler_base::operator DWORD&): New operator.
(fhandler_base::get_name): Return normalized path from pc.
(fhandler_base::get_win32_name): Return windows path from pc.
(fhandler_base::isdevice): Renamed from is_device.
(fhandler_base::get_native_name): Return device format.
(fhandler_fifo): New class.
(fhandler_nodevice): New class.
(select_stuff::device_specific): Remove array.
(select_stuff::device_specific_pipe): New class element.
(select_stuff::device_specific_socket): New class element.
(select_stuff::device_specific_serial): New class element.
(select_stuff::select_stuff): Initialize new elements.
* fhandler_disk_file.cc (fhandler_base::fstat_by_handle): Move to base class
from fhandler_disk_file.
(fhandler_base::fstat_by_name): Ditto.
(fhandler_base::fstat_by_name): Ditto.
(fhandler_disk_file::open): Move most functionality into
fhandler_base::open_fs.
(fhandler_base::open_fs): New function.
(fhandler_disk_file::close): Move most functionality into
fhandler_base::close_fs.
(fhandler_base::close_fs): New function.
* fhandler_mem.cc (fhandler_dev_mem::open): Use device name in debugging
output.
* fhandler_socket.cc (fhandler_socket::set_connect_secret): Copy standard
urandom device into appropriate place.
(fhandler_socket::accept): Reflect change in fdsock return value.
* fhandler_tty.cc: See "throughouts" above.
* net.cc: Accommodate fdsock change throughout.
(fdsock): Return success or failure, accept fd argument and device argument.
* path.cc (symlink_info::major): New element.
(symlink_info::minor): New element.
(symlink_info::parse_device): Declare new function.
(fs_info::update): Accommodate changes in path_conv class.
(path_conv::fillin): Ditto.
(path_conv::return_and_clear_normalized_path): Eliminate.
(path_conv::set_normalized_path): New function.
(path_conv::path_conv): Set info in dev element. Use path_conv methods Check
for FH_FS rather than FH_BAD to indicate when to fill in filesystem stuff.
where appropriate rather than direct access. Use set_normalized_path to set
normalized path.
(windows_device_names): Eliminate.
(get_dev): Ditto.
(get_raw_device_number): Ditto.
(get_device_number): Ditto.
(win32_device_name): Call new device name parser to do most of the heavy
lifting.
(mount_info::conv_to_win32_path): Fill in dev field as appropriate.
(symlink_worker): Handle new device files.
(symlink_info::check): Ditto.
(symlink_info::parse_device): Define new function.
* path.h (executable_states): Move here from fhandler.h.
(fs_info): Rename variables to *_storage and create methods for accessing same.
(path_conv): Add dev element, remove devn and unit and adjust inline methods to
accommodate.
(set_normalized_path): Declare new function.
* pinfo.cc (_pinfo::commune_recv): Add broken support for handling fifos.
(_pinfo::commune_send): Ditto.
* pipe.cc (fhandler_pipe::close): check for existence of handle before closing
it.
(handler_pipe::create): Rename from make_pipe. Change arguments to accept
fhandler_pipe array. Accommodate fifos.
(pipe): Rework to deal with fhandler_pipe::create changes.
(_pipe): Ditto.
* select.cc: Use individual device_specific types throughout rather than
indexing with obsolete device number.
(set_bits): Use is_socket call rather than checking device number.
* shared_info.h (CURR_MOUNT_MAGIC): Update.
(conv_to_win32_path): Reflect addition of device argument.
* syscalls.cc (mknod_worker): New function.
(open): Use build_fh_name to build fhandler.
(chown_worker): Detect if this is an 'auto' device rather than an on-filesystem
device and handle appropriately.
(chmod_device): New function.
(chmod): Detect if this is an 'auto' device rather than an on-filesystem device
and handle appropriately. Use chmod_device to set mode of in-filesystem
devices.
(stat_worker): Eliminate path_conv argument. Call build_fh_name to construct
fhandler. Use fh->error() rather than pc->error to detect errors in fhandler
construction.
(access_worker): New function pulled from access. Accommodate in-filesystem
devices.
(access): Use access_worker.
(fpathconf): Detect if this is an 'auto' device rather than an on-filesystem
device and handle appropriately.
(mknod_worker): New function.
(mknod32): New function.
(chroot): Free normalized path -- assuming it was actually cmalloced.
* tty.cc (create_tty_master): Tweak for new device class.
(tty::common_init): Ditto.
* winsup.h (stat_worker): Remove.
(symlink_worker): Declare.
* exceptions.cc (set_process_mask): Just call sig_dispatch_pending and don't
worry about pending_signals since sig_dispatch_pending should always do the
right thing now.
(sig_handle): Reorganize SIGCONT handling to more closely conform to SUSv3.
* pinfo.h: Move __SIG enum to sigproc.h.
(PICOM_FIFO): New enum element.
(_pinfo): Remove 'thread2signal' stuff throughout class.
(_pinfo::commune_send): Make varargs.
(_pinfo::sigtodo): Eliminate.
(_pinfo::thread2signal): Ditto.
* signal.cc (kill_worker): Eliminate call to setthread2signal.
* sigproc.cc (local_sigtodo): Eliminate.
(getlocal_sigtodo): Ditto.
(sigelem): New class.
(pending_signals): New class.
(sigqueue): New variable, start of sigqueue linked list.
(sigcatch_nonmain): Eliminate.
(sigcatch_main): Eliminate.
(sigcatch_nosync): Eliminate.
(sigcomplete_nonmain): Eliminate.
(pending_signals): Eliminate.
(sig_clear): Call signal thread to clear pending signals, unless already in
signal thread.
(sigpending): Call signal thread to get pending signals.
(sig_dispatch_pending): Eliminate use of pending_signals and just check
sigqueue.
(sigproc_terminate): Eliminate all of the obsolete semaphore stuff. Close
signal pipe handle.
(sig_send): Eliminate all of the obsolete semaphore stuff and use pipe to send
signals.
(getevent): Eliminate.
(pending_signals::add): New function.
(pending_signals::del): New function.
(pending_signals::next): New function.
(wait_sig): Eliminate all of the obsolete semaphore stuff. Use pipe to
communicate and maintain a linked list of signals.
* sigproc.h: Move __SIG defines here. Add __SIGPENDING.
(sig_dispatch_pending): Remove "C" specifier.
(sig_handle): Accept a mask argument.
* thread.cc: Remove signal handling considerations throughout.
set.
* exceptions.cc (sig_handle_tty_stop): Don't reset sigCONT event since it is
reset automatically.
* fork.cc (fork): Remove obsolete usage of PID_SPLIT_HEAP.
* include/sys/cygwin.h: Ditto.
* sigproc.cc (sig_send): Use sigframe init method to set frame since it checks
for previous ownership of the frame.
* sigproc.h (sigframe::init): Accept an "is_exception" argument.
* cygheap.h (cygheap_types): Add HEAP_SIGS.
* exceptions.cc (signal_fixup_after_exec): Remove from this file.
* pinfo.h (pinfo::getsig): Just return global_sigs array.
(pinfo::sigs): Delete.
* sigproc.cc (signal_fixup_after_exec): Move it here.
(global_sigs): New global array, moved from pinfo structure.
(sigalloc): New function. Allocate global sigaction array here.
(proc_subproc): Remove copysigs call. It's automatic now.
* include/sys/cygwin.h (PID_NOCLDSTOP): New value.
* signal.cc (sigaction): Set myself->PID_NODCLDSTOP when appropriate.
* sigproc.h (sigalloc): Declare.
* fnmatch.c (fnmatch): Use C90 parameters.
(rangematch): Ditto.
* fhandler.cc (fhandler_base::raw_read): Use right coercion to avoid a compiler
warning.
* sigproc.cc (checkstate): Make regparm.
(getevent): Change parameters in declaration, rename from getsem, make regparm.
(sig_send): Recognize that nosync is now an event. Remove some old cruft from
previous interrupt anywhere signal handler.
(getevent): Change parameters in definition, rename from getsem. Allocate
event rather than semaphore.
(wait_sig): Treat sigcatch_nosync as an event.
* exceptions.cc (setup_handler): Move non-interruptible condition handling
(back) to wait_sig (as suggested by Pierre Humblet).
(set_process_mask): Don't worry about calling sig_dispatch_pending from
sigthread since it is detected in the function anyway.
(sig_handle): Eliminate thisproc arg. Don't call sig_dispatch_pending on
SIGCONT since that should happen automatically.
* sigproc.cc (sig_dispatch_pending): Eliminate justwake argument. Just return
when called from sigthread.
(wait_sig): Change some variables to bool. Change inner while to an if. Move
uninterruptible signal handling here.
(sigproc_terminate): Don't call sig_dispatch_pending. Just increment semaphore
on exit.
* speclib: Use slightly different (but still flawed) method for determining
symbols to extract from libraries.
* exceptions.cc (signal_fixup_after_exec): Eliminate argument in definition.
Don't reset signal handlers after spawm. Just treat like fork/exec.
* dcrt0.cc (dll_crt0_1): Don't pass PROC_SPAWN argument to
signal_fixup_after_exec.
* syscalls.cc (unlink): Don't change attributes of file if not readonly/system.
Ditto for resetting of arguments.
timeslice' wait.
(setup_handler): Revamp YA to attempt to deliver signal multiple times on
failure rather than punting to wait_sig.
* miscfuncs.cc (low_priority_sleep): Accept INFINITE sleep to mean "don't reset
the priority after setting it to idle". Return previous priority.
* winsup.h (SLEEP_0_STAY_LOW): Define.
(low_priority_sleep): Return an int.
* sigproc.h: Define WAIT_SIG_PRIORITY here.
* sigproc.cc: Remove WAIT_SIG_PRIORITY definition.
* sigproc.h (sigCONT): Declare.
(wait_sig): Create sigCONT event here.
* exceptions.cc (sig_handle_tty_stop): Wait for sigCONT event rather than
stopping thread.
(sig_handle): Set sigCONT event as appropriate on SIGCONT rather than calling
ResumeThread.
* dcrt0.cc (dll_crt0_1): Just wait for signal thread to go live rather than
going through the overhead of invoking it.
* fork.cc (fork_child): Ditto.
* exceptions.cc (signal_fixup_after_fork): Call sigproc_init here.
* sigproc.cc (proc_can_be_signalled): Assume that the signal thread is live.
(sig_dispatch): Ditto.
(sig_send): Ditto.
(wait_for_sigthread): Renamed from "wait_for_me". Assume that wait_sig_inited
has been set and that this function is only called from the main thread.
* winsup.h (wait_for_sigthread): Declare new function.
* fhandler.h (fhandler_proc::fill_filebuf): Take a pinfo argument.
* fhandler_proc.cc (fhandler_proc::get_proc_fhandler): Simplify search for
given pid.
(fhandler_proc::readdir): Assume that pid exists if it shows up in the winpid
list.
* fhandler_process.cc (fhandler_process::open): Simplify search for given pid.
Call fill_filebuf with pinfo argument.
(fhandler_process::fill_filebuf): Pass pinfo here and assume that it exists.
* pinfo.h (pinfo::remember): Define differently if sigproc.h is not included.
* dll_init.cc (dll_list::detach): Don't run destructor on exit.
signal came from this process or not.
* sigproc.h: Reflect sig_handle arg change.
* signal.cc (kill_pgrp): Add sigframe info.
(abort): New function. Eliminates newlib function of same name.
* sigproc.cc (wait_sig): Pass "signal from this process" value as arg 2.
inline" warnings.
* security.h (class cygsid): Ditto.
* sigproc.cc (get_proc_lock): Ditto.
* sigproc.h (class sigframe): Ditto.
* sync.h (class muto): Ditto.
* fhandler.h (fhandler_base::get_guard): Actually MAKE virtual as previously
indicated.
* pipe.cc (make_pipe): Remove extraneous set_errno.
* syscalls.cc (_open): Ditto.
* select.cc (peek_pipe): Need to check that there is still something to read
from the pipe after acquiring the mutex since another process/thread could have
eaten the input before we got to acquiring the lock. (Thanks to Nick Duffek
for this inspiration.)
queried in waitsig later.
* sigproc.cc (wait_sig): Don't deliver a signal if in a vfork.
* fork.cc (vfork): Deliver all signals on parent return from vfork.
(setup_handler): Move actions after a successful interrupt to interrupt_setup.
* fork.cc (vfork): Augment debugging output.
* sigproc.cc (proc_subproc): Ditto.
* spawn.cc (spawn_guts): Ditto. Correctly fill out progname when spawn
NO_WAIT. Call signal handler when a signal arrives.
* sigproc.h: Declare a function.
structure of newlib.
* sigproc.h (sig_send): Add exception parameter to sig_send.
* sigproc.cc (sig_send): Ditto. Use it when setting frame info.
* exceptions.cc (handle_exceptions): Use exception flag when calling sig_send.
[sigframe::~sigframe]: Clear exception field.
[sigframe::set]: Set exception field from caller.
* sigproc.cc (sig_send): Set exception field when frame pointer is passed in.
* exceptions.cc (interrupt_on_return): Always treat exception as interruptible.
it.
* cygwin.din: Remove obsolete "__empty" export.
* exceptions.cc (call_signal_handler_now): Force inclusion of function even
when -finline-functions is specified.
* sigproc.h: Remove obsolete call_signal_handler declaration.
* fhandler_console.cc (cp_get_internal): New function.
(cp_convert): New function.
(con_to_str): New function.
(str_to_con): New function.
(fhandler_console::read): Replace OemToCharBuff with con_to_str.
(fhandler_console::write_normal): Replace CharToOemBuff with str_to_con.
(sigframe::~sigframe): Use unregister method.
(sigframe::call_signal_handler): Declare new method.
* exceptions.cc (sigframe::call_signal_handler): New method. Unregisters
current sigframe before calling signal handler.
(setup_handler): Clear waiting threads prior to arming signal_arrived.
* syscalls.cc (_read): Change goto to loop. Recalculate sigframe inside of
loop so that constructor is called when appropriate.
* wait.cc (wait4): Ditto.
* signal.cc: Change "sig" to "signal" in debugging messages throughout.
* sigproc.cc: Ditto.
* exceptions.cc (setup_handler): Clarify debugging message.
* sigproc.cc (proc_subproc): Remove PROC_CHILDSTOPPED test. It is handled by
normal PROC_CLEARWAIT case.
(wait_sig): Eliminate "dispatched" tracking. Remove __SIGCHILDSTOPPED test.
Decrement counter again before jumping out of InterlockedDecrement loop so that
subsequent InterlockedIncrement will keep the counter at the correctly
decremented value and also detect when there are pending signals.
* sigproc.h: Remove __SIGCHILDSTOPPED element.
(procstuff): Remove PROC_CHILDSTOPPED element.
(sigframe:;set): Call get_winapi_lock after frame is set so that signal handler
thread knows not to call SuspendThread.
(sigframe::~sigframe): Release winapi_lock.
* exceptions.cc (sigthread::get_winapi_lock): New method.
(sigthread::release_winapi_lock): New method.
(setup_handler): Use get_winapi_lock to ensure that signalled thread is not
blocked in a Windows API.
* path.h (path_types): Avoid broken GCC warning.
* signal.cc (sigaction): Don't treat SIGCONT specially.
* exceptions.cc (interrupt_setup): Save sa_flags of interrupted signal for
later use.
(sig_handler): Default any stopping signal to SIGSTOP.
(call_signal_handler): New function.
(sigdelayed0): New function.
* sigproc.cc (sigproc_init): Initialize SIGSTOP sigaction for special behavior.
* sigproc.h: Define call_signal_handler.
* syscalls.cc (_read): Allow restartable signal behavior.
* environ.cc (codepage_init): To here.
* exceptoins.cc (SIG_NONMASKABLE): Remove SIGCONT from consideration since it
is supposed to be maskable.
* signal.cc (sigaction): Ditto.
* sigproc.cc (wait_sig): Ditto.
* winsup.h: Eliminate global declaration of codepage_init.
* child_info.h (child_info): Eliminate parent_alive.
* dcrt0.cc (dll_crt0_1): Call fork_init for debugging pid creation.
* fork.cc (fork_child): Reflect change to fixup_mmaps_after_fork arguments.
(slow_pid_reuse): New function to grab last 'n' pids to prevent pid reuse.
(fork_parent): Move last_fork_proc into slow_pid_reuse. Handle fork_pids
debugging. Eliminate unnecessary call to set_child_mmap_ptr.
(fork_init): New debugging function.
* mmap.cc (fixup_mmaps_after_fork): Renamed from recreate_mmaps_after_fork.
Rely on copied data after a fork.
(set_child_mmap_ptr): Eliminate.
* pinfo.h (_pinfo): Eliminate parent_alive, mmap_ptr and reflect above changes.
* spawn.cc (spawn_guts): Eliminate vestiges of "old way" of sending new hProc
to parent process.
(dll_crt0_1): Move sigthread lock initialization to earlier in startup.
* exceptions.cc (interrupt_on_return): Remove previous kludgy attempt to detect
an invalid frame.
(call_handler): Eliminate inner for loop. Grab signal critical section lock
where appropriate.
* sigproc.cc (proc_subproc): Restore uid setting.
* sigproc.h (sigthread): Reinstitute sigthread lock as a critical section.
(sigframe): Grab the sigthread lock before clearing frame to avoid having the
signal thread use an invalid frame.
is not available.
* dcrt0.cc (sigthread::init): Ditto.
(dll_crt0_1): Move set_process_privileges call (temporarily?) to pinfo_init.
(pinfo_init): Only call set_process_privileges when allow_ntsec.
* dcrt0.cc (dll_crt0_1): Call signal_fixup_after_exec where appropriate. Set
myself->uid from parent version. Just use ThreadItem Init method. Close or
store hexec_proc as appropriate.
(_dll_crt0): Store user_data->forkee here so that proper tests can be made
subsequently.
(do_exit): Remove hExeced stuff.
* environ.cc (environ_init): Accept environ count as well as environ pointer.
* environ.h: Reflect above change.
* pinfo.cc (pinfo_init): Ditto. Accept environ count.
(fixup_in_spawned_child): Remove.
* spawn.cc (spawn_guts): Move signal code to dll_crt0_1. Don't suspend execing
process since it is no longer necessary. Store envc.
* exceptions.cc (signal_fixup_after_exec): New function.
(call_handler): Remove hExeced test.
* child_info.h (cygheap_exec_info): Store envc as well as envp.
(child_info_spawn): Store hexec_proc so that it can be closed in child.
* path.cc (normalize_posix_path): Avoid intermediate use of temporary cwd buf.
(normalize_win32_path): Ditto.
(cwdstuff::get_initial): Always set lock.
* sigproc.h: Remove hExeced.
* strace.cc (strace::vsprntf): Modify to accomodate for lack of hExeced.
* thread.cc (MTinterface::Init): Merge Init1 and ClearReent into this method.
(MTinterface::Init1): Eliminate.
(MTinterface::ClearReent): Eliminate.
* thread.h: Reflect above changes.
* include/sys/strace.h (strace): Make microseconds() public. Make various
functions 'regparm', throughout.
* pinfo.h (_pinfo): Inline simple signal manipulation functions. Requires
inclusion of thread.h which was removed from .cc files, where appropriate.
throughout.
* pinfo.cc: Eliminate signal manipulation functions.
(_pinfo::exit): Calculate total rusage for exiting process here.
* cygheap.cc (size2bucket): Eliminate.
(init_buckets): Ditto.
(_cmalloc): Calculate size and bits in a loop rather than going through a
function call.
(_crealloc): Use stored array index to calculate allocated size.
* spawn.cc (spawn_guts): Use _pinfo exit method to exit, calculating cpu usage.
console_handler_thread_waiter. It is obsolete.
(ctrl_c_handler): Don't use console_handler_thread_waiter.
* path.cc (hash_path_name): Fix handling of relative names. Make case
insensitive.
* path.h (suffix_info): Use initializers.
* pinfo.h (_pinfo): Avoid initializers for null case.
* resource.cc (fill_rusage): Zero rest of rusage structure.
* security.cc (set_process_privileges): Don't reopen parent process. Just use
hMainProc.
* signal.cc (signal): Track when a signal handler has been used.
(sigaction): Ditto.
* sigproc.cc (pchildren): Use default initializer.
(zombies): Ditto.
(sigproc_terminate): Avoid closing handles that will be closed on exit anyway.
(wait_sig): Send signal to "parent" on EXECing, not FORKing.
(wait_subproc): Send SIGCHLD here rather than in proc_wait to avoid potential
muto conflicts.
* sigproc.h (sigthread): Don't initialize to zero. It's the default.
* spawn.cc (spawn_guts): Fill in resources from exec parent prior to
termination.
* sync.h (muto): Don't initialize to zero.
* syscalls.cc (close_all_files): Use one lock around entire loop and call
fhandler close/release stuff directly.
(_read): Don't use ready_for_read if there are not signal handlers active.
* dcrt0.cc (dll_crt0_1): Fix display of "title".
(do_exit): Use pinfo exit method to exit.
(__api_fatal): Ditto.
* exceptions.cc (signal_exit): Ditto.
* fork.cc (fork_child): Remove debugging stuff. Use pinfo_fixup_after fork in
place of exec_fixup_after_fork.
* pinfo.cc (pinfo_fixup_after_fork): New method.
(pinfo_fixup_in_spawned_child): Ditto.
(_pinfo::exit): New method.
(_pinfo::init): Remove recursion. Detect pathological case where pinfo
structure already exists for new pid.
* pinfo.h (_pinfo): Reorganize slightly. Add new method and new function
declarations.
* sigproc.cc (proc_exists): Previous simplification was a little to simple.
Try harder to detect if a process exists.
(proc_terminate): Use PID_EXITED setting to determine if process is still
around.
(WFSO): Remove debugging statement.
(WFMO): Ditto.
* spawn.cc (exec_fixup_after_fork): Eliminate.
(spawn_guts): Always set old_title to NULL. Is it really needed? Move
hexec_proc to pinfo.cc. Call pinfo_fixup_in_spawned_child to eliminate handle
link after a spawn.
* include/sys/cygwin.h: Remove PID_NOT_IN_USE. Add PID_EXITED.
* fhandler.cc (fhandler_base::fstat): Move to inline method in fhandler.h.
(fhandler_base::set_io_handle): Ditto.
* fhandler.h (fhandler_base): Make some methods inline.
* fhandler_console.cc (fhandler_console::write_normal): Make buffer larger.
* sigproc.h (sigframe::sigframe): Actually use set ebp parameter correctly.
* spawn.cc (spawn_guts): Set dwProcessId when exec'ing. Just exit immediately
after reparenting.
* syscalls.cc: Sprinkle sigframe stuff throughout.
* wait.cc (wait4): Set signal frame here.
* dcrt0.cc (__api_fatal): Don't rely on small_printf to display errors. Always
display problems to the console, if possible.
frame pointer rather than using this within the function, which is unstable
when this method is not inlined.
* net.cc: Eliminate use of second argument to sigframe.set throughout.
* select.cc (cygwin_select): Ditto.
* sigproc.cc (sig_send): Ditto.
throughout.
* shared.h: Remove.
* cygwin_version.h: New file.
* delqueue.h: New file.
* environ.h: New file.
* host_dependent.h: New file.
* perprocess.h: New file.
* registry.h: New file.
* security.h: New file.
* exceptions.cc (unused_sig_wrapper): Remove _raise.
* sigproc.h (class sigframe): Default frames to skip to zero or suffer from
exuberant optimization.
* fhandler_tty.cc (fhandler_tty::write): Set appropriate errno when WriteFile
to pipe fails.
the changes below. Redefine process structure to avoid a fixed size table.
Redefine pinfo/_pinfo classes. Use these throughout.
* dcrt0.cc (dll_crt0_1): Accomodate set_myself argument change.
(__api_fatal): Accomodate _pinfo::record_death argument change.
* exceptions.cc (really_exit): Ditto.
(sig_handle_tty_stop): Use pinfo constructor to access process info.
(events_init): Don't create pinfo_mutex since it is no longer required.
* external.cc (fillout_pinfo): Use winpids class to iterate over all system
pids.
(cygwin_internal): lock_pinfo_for_update and unlock_pinfo are now noops.
* fhandler_termios.cc (fhandler_termios::set_ctty): Use pinfo constructor to
access process info.
* fork.cc (fork): Reorganize to initialize child info after the child has
started since that is when we know the child's winpid, which is necessary to
allocate the pinfo shared memory.
* mmap.cc (recreate_mmaps_after_fork): Change arg type to _pinfo.
* pinfo.cc: Rename pinfo methods to _pinfo throughout. Eliminate pinfo_list
stuff.
(set_myself): Accept a pid argument now. Call pinfo initializer to initialize
myself. Detect when this is an "execed" process and create an "indirect" pid
block.
(pinfo_init): Accomodate set_myself arg change.
(procinfo): Remove.
(pinfo::lock_pinfo): Remove.
(pinfo::unlock_pinfo): Remove.
(pinfo::init): New method. Allocates shared memory space for process pinfo
structure.
(pinfo::record_death): Don't call locking functions.
(cygwin_winpid_to_pid): Simplify by using new pinfo constructor.
(EnumProcessesW95): New function for iterating over processes on Windows 95.
(winpids::winpids): New constructor for winpids class. Sets up a list of
process ids.
(enum_init): Initialize w95/wnt pid enumerators.
* shared.cc (shared-info::initialize): Remove pid initialization.
* shared.h: Move pinfo stuff into pinfo.h.
(class shared_info): Remove pinfo_list element.
* signal.cc (kill_worker): Use pinfo constructor to access process info.
(kill_pgrp): Ditto. Use winpids methods to access list of processes.
* sigproc.cc: Throughout, modify to use _pinfo where appropriate.
(proc_exists (pid_t)): New function. Determines if a process exists based on
the pid.
(proc_exists (_pinfo *p): Use new proc_exists function above.
(proc_subproc): Copy pinfo stuff around rather than _pinfo pointers. Try to be
careful about releasing shared memory when we don't need it anymore. Remove
pinfo locks.
(remove_zombies): Remove pinfo memory when zombie is going away.
* sigproc.h: Reflect _pinfo/pinfo changes in sigproc.cc.
* spawn.cc (spawn_guts): Eliminate pinfo *child argument. Reorganize to only
initialize child pinfo after process has been started and we know the windows
pid.
(_spawnve): Reflect spawn_guts changes.
* syscalls.cc (setpgid): Use pinfo constructor to access process info.
(getpgid): Ditto.
(internal_getlogin): Use _pinfo.
* winsup.h: Eliminate pinfo_mutex. Eliminate spawn_guts declaration since it
is static now. Reflect set_myself argument change.
* include/sys/cygwin.h: Add some PID_* enums to accomodate new pinfo stuff.
* include/cygwin/version.h: Update minor version for cygdrive changes below.
referring to something like c:\.
* dcrt0.cc (dll_crt0_1): Move uinfo initialization prior to sig_send
initialization to give signal thread a chance to finish.
* debug.cc (WFSO): Move to sigproc.cc
(WFMO): Ditto.
* exceptions.cc (interruptible): Allocate slightly more space for directory
just for paranoia's sake.
(call_handler): Eliminate nonmain argument. Determine if main thread has set a
frame pointer and use it if so.
(sig_handle): Eliminate nonmain argument.
* net.cc: Record frame information in appropriate routines throughout.
* select.cc (select): Ditto.
* sigproc.cc: Use sigthread structure to record mainthread id throughout.
(sig_send): Record frame information for signal handler.
(wait_sig): Reflect argument change in sig_handle.
(WFSO): Move here and record frame information for signal handler.
(WFMO): Ditto.
* sigproc.h: Implement new "sigthread" class. Implement "sigframe" class for
manipulating signal frame info.
* thread.cc (__pthread_kill): Use standard _kill() function rather than calling
sig_send directly.
* winsup.h: Eliminate ebp element from signal_dispatch class.
in forked process.
(interruptible): Flag as interruptible when running in main process module.
(interrupt_setup): Save return address and address of return address.
(signal_fixup_after_fork): New function. Uses above two values to restore
proper behavior to forked process.
(interrupt_on_return): Pass return address address to interupt_setup.
(interrupt_now): Pass NULL for return address address to interrupt_setup.
* fork.cc (fork): Call signal_fixup_after_fork.
* shared.h: Lint cleanups.
* winsup.h: Ditto.
* exceptions.cc (sfta): Eliminate obsolete function.
(sgmb): Eliminate obsolete function.
(class stack_info): Remove MS method for walking the stack.
(stack_info::init): Just initialize required fields.
(stack_info::brute_force): Rename to stack_info::walk.
(handle_exceptions): Pass derived frame pointer to sig_send.
(interrupt_setup): Clear saved frame pointer here.
(interrupt_on_return): thestack is no longer a pointer.
(call_handler): Accept a flag to indicate when a signal was sent from other
than the main thread. Use saved frame pointer for determining where to place
signal handler call.
(sig_handle): Accept "nonmain" argument. Pass it to call_handler.
* fhandler_tty.cc (fhandler_tty_common::__acquire_output_mutex): Change
debugging output slightly.
* (fhandler_tty_common::__release_output_mutex): Ditto.
(fhandler_tty_slave::read): Fix a comment, remove a goto.
* sigproc.cc (sig_send): Accept an optional frame pointer argument for use when
suspending the main process. sigcomplete_main is an autoreset event now. Save
frame pointer for non-main operation.
(wait_sig): Make sigcomplete_main an autoreset event. Eliminate NOSIGQUEUE.
Pass rc to sig_handle to signify if this was a nonmain process.
* sigproc.h: Reflect change to sig_send argument.
* syscalls.cc (swab): Eliminate swab function since it is now available in
newlib.
* winsup.h (signal_dispatch): Change CONTEXT cx to DWORD ebp.
* debug.cc (iscygthread): New function.
* debug.h: Declare it.
* exceptions.cc (set_process_mask): Flush pending signals.
(handle_sigsuspend): No need to flush pending signals.
(call_handler): Refine previous tests of muto ownership. Only clear wait()'s
when we have definitely responded to a signal.
* fhandler_console.cc (fhandler_console::read): Don't set EINTR if executing in
a "cygwin" thread.
* sigproc.cc (proc_subproc): Use second argument to control whether CLEARWAIT
actually sets "signalled" flag.
* sync.h (muto): Add 'unstable' method.
interruptible.
(call_handler): Avoid suspending a thread if it owns a mutex. Only set
signal_arrived if the thread was actually interrupted.
(events_init): Initialize module information needed by interruptible().
(sigdelayed): Don't call sig_dispatch_pending since it could screw up
* init.cc (dll_entry): Record module handle of main for use by interruptible().
(proc_subproc): Reorganize handling of terminated child so that the bulk of the
processing comes from the signal thread.
(wait_sig): Force processing of waiting threads if SIGCHLD is not processed.
* sync.cc (muto::release): Set tid == 0 after lock is released or signal
processor will be confused.
Christopher Faylor