event.
(_cygtls::handle_SIGCONT): Declare ew function.
* cygwait.cc (is_cw_sig_handle): Delete.
(is_cw_sig_cont): New convenience define.
(cygwait): Clear signal if is_cw_sig_cont and we got a SIGCONT.
* cygwait.h (cw_wait_mask): Add cw_sig_cont.
* exceptions.cc (sig_handle_tty_stop): Tighten "incyg" region. Use cw_sig_cont
param for cygwait. Don't zero signal here outside of lock.
(sigpacket::setup_handler): Don't check for in_forkee since we will now never
get here in that state.
(_cygtls::handle_SIGCONT): Define new function.
(sigpacket::process): Call handle_SIGCONT early to deal with SIGCONT. Nuke
continue_now handling. Allow SIGKILL to kill a suspended process. Delete a
couple of now-unneeded labels.
(_cygtls::call_signal_handler): Reorganize setting of incyg within lock.
* sigproc.cc (pending_signals): Simplify.
(pending_signals::clear): New method.
(_cygtls::remove_wq): Reorganize to always close wq.thread_ev if it exists to
avoid handle leaks.
(sig_clear): Simplify by just calling sigq.clear().
(sig_dispatch_pending): Always call sigq.pending even in signal thread to force
another loop in wait_sig.
(sig_send): Remove a "goto out" just before out: label.
(pending_signals::add): Simplify.
(pending_signals::del): Delete.
(pending_signals::next): Delete.
(wait_sig): Define variable q to be the start of the signal queue. Just
iterate through sigq queue, deleting processed or zeroed signals. Only set
clearwait when the current signal is SIGCHLD.
* sigproc.h: Add a comment about an unused enum.
(mainly in fhandler*) start fixing gcc 4.7.2 mismatch between regparm
definitions and declarations.
* gendef: Define some functions to take @ declaration to accommodate _regN
defines which use __stdcall.
* gentls_offsets: Define __regN macros as empty.
* autoload.cc (wsock_init): Remove unneeded regparm attribute.
* winsup.h (__reg1): Define.
(__reg2): Define.
(__reg3): Define.
* advapi32.cc (DuplicateTokenEx): Coerce some initializers to avoid warnings
from gcc 4.7.2.
* exceptions.cc (status_info): Declare struct to use NTSTATUS.
(cygwin_exception::dump_exception): Coerce e->ExceptionCode to NTSTATUS.
* fhandler_clipboard.cc (cygnativeformat): Redefine as UINT to avoid gcc 4.7.2
warnings.
(fhandler_dev_clipboard::read): Ditto.
* exception.h (cygwin_exception): New class.
(cygwin_exception::dumpstack): Declare new function.
(cygwin_exception::context): Ditto.
(cygwin_exception::dump_exception): Ditto.
* exceptions.cc (cygwin_exception::dump_exception): Move into cygwin_exception
class. Accommodate new variable names.
(cygwin_exception::dumpstack): Ditto stackdump -> dumpstack.
(exception::handle): Move andreas processing earlier. Defer signal processing
decisions to the signal thread where they belong. Pass exception information
to sig_send via new siginfo_t si_cyg field.
(ctrl_c_handler): Wait for SIGHUP signal to be processed since it could cause a
process exit and we don't want races with thread exit lock.
(signal_exit): Move back here from sigproc.cc. Modify arguments and remove
from sigpacket class. Decide when to dump core based on signal type.
(sigpacket::process): Handle exiting signals in context of threads rather than
in the signal thread. Signal debugger on non-Windows signals. Remove
setup_signal_exit call.
* sigproc.cc (no_signals_available): Remove argument.
(signal_exit_code): Delete.
(close_my_readsig): Ditto.
(_cygtls::signal_exit): Move to exceptions.cc.
(sigproc_terminate): Don't attempt to terminate signal thread.
(setup_signal_exit): Delete.
(exit_thread): Use new si_cyg entry in siginfo_t.
(sig_send): Just use empty initializer for si. Accommodate change in
no_signals_available argument.
(wait_sig): Remove attempt to "go asynchronous" on process exit. Delete
__SIGEXIT handling. Don't ever exit.
* sigproc.h: Remove __SIGEXIT from signal enum. Renumber.
* include/cygwin/signal.h (siginfo_t): Add si_cyg entry.
* dcrt0.cc (do_exit): Just set exit_state to ES_EVENTS_TERMINATE and nuke call
to events_terminate which just set a superfluous flag.
* sigproc.cc (signal_exit_code): New variable.
(setup_signal_exit): Define new function.
(_cygtls::signal_exit): Remove accommodations for closing the signal pipe
handle.
(exit_thread): Just sleep if we're exiting.
(wait_sig): If signal_exit_code is set, just handle bookkeeping signals and
exit ReadFile loop if there is nothing more to process. Call signal_exit at
end if signal_exit_code is non-zero.
* sigproc.h (setup_signal_exit): Declare new function.
* exceptions.cc (sigpacket::process): Use setup_signal_exit to control exiting
due to a signal.
(exception::handle): Ditto. Query exit_state rather than defunct exit_already
to determine if we are exiting.
* globals.cc (ES_SIGNAL_EXIT): New enum.
* sync.h (lock_process::release): New function for explicitly unlocking muto.
(lock_process::~lock_process): Use release method.
some modifications.
* init.cc (dll_entry): Revert previous change.
* miscfuncs.cc: Include sigproc.h for exit_thread declaration.
* winsup.h (ExitThread): Define as 'exit_thread' to ensure no accidental use.
* sigproc.cc (exit_thread): New function.
(wait_sig): Handle __SIGTHREADEXIT case. Don't just block rather than
returning from this function.
* sigproc.h (__SIGTHREADEXIT): New enum.
(exit_thread): Declare.
* sync.cc (muto::release): Accept a tls command-line argument.
* sync.h (muto::release): Accept a tls command-line parameter. Default to
&_my_tls.
* cygerrno.h (__set_errno): Define as extern so that no function code is ever
emitted.
* cygserver_ipc.h (cygserver_ipc.h): Ditto.
* miscfuncs.h (transform_chars): Ditto.
* path.h (has_attribute): Ditto.
* security.h (privilege_luid): Ditto.
* winsup.h (flush_file_buffers): Ditto.
* _cygtls.cc (_cygtls::call2): Use new exit_thread function in place of
ExitThread.
* miscfuncs.cc (thread_wrapper): Ditto.
* thread.cc (pthread::exit): Ditto.
(pthread_mutex::unlock): Set tid to NULL rather than 0.
(pthread_spinlock::unlock): Ditto.
* pinfo.cc (commune_process): Actually call lock_process constructor.
* sigproc.cc (exit_thread): New function.
(wait_sig): Handle __SIGTHREADEXIT case. Don't just block rather than
returning from this function.
* sigproc.h (__SIGTHREADEXIT): New enum.
(exit_thread): Declare.
* sync.cc (muto::release): Accept a tls command-line argument.
* sync.h (muto::release): Accept a tls command-line parameter. Default to
&_my_tls.
* cygtls.h (_cygtls::push): Inline.
(_cygtls::interrupt_now): Change signal number argument to siginfo_t argument.
(_cygtls::interrupt_setup): Ditto.
(_cygtls::set_siginfo): Delete declaration.
(_cygtls::reset_signal_arrived): Don't reset signal_arrived signal. Just reset
flag.
* exceptions.cc (_cygtls::interrupt_now): Reflect argument changes. Pass si to
interrupt_setup.
(_cygtls::interrupt_setup): Reflect argument changes. Fill out tls infodata
here using passed-in si. Use si.si_signo instead of sig.
(sigpacket::setup_handler): Move this function into sigpacket class. Use si
field from the class as appropriate.
(sigpacket::process): Don't call tls->set_siginfo here since setup_handler
could fail. Eliminate now-unneeded sig argument.
* sigproc.h (sigpacket::setup_handler): Move setup_handler to this class.
* sigproc.h (sigdelayed): Make symbol globally available.
* gendef (sigdelayed): Specifically zero incyg and stacklock.
* signal.cc (sigwaitinfo): Lock _my_tls and try harder to clean up signal
information.
* exceptions.cc (sig_handle_tty_stop): Make sure that incyg is cleared when
exiting if we have no parent process. Only wait for signal_arrived.
(sigpacket::process): Make continue_now a bool. Delay sending signal_arrived
until the end. Make code more defensive to avoid calling signal handler when
stopped. Only set signal_arrived when stopped.
* sigproc.cc (sig_hold): Rename from sigCONT. Make static.
(sig_send): Accommodate sigCONT -> sig_hold rename.
(wait_sig): Ditto.
* sigproc.h (sigCONT): Delete declaration.
* fhandler_console.cc (fhandler_console::write): Use new '%0c' facility to
print characters. Change to paranoid to avoid excessive strace output.
* fhandler_tty.cc (fhandler_pty_master::accept_input): Make frequent strace
printf "paranoid" to help cut down on strace output size.
* signal.cc (sigsuspend): Add standard syscall strace output.
(sigpause): Ditto.
(pause): Ditto.
* cygtls.h (_cygtls::reset_signal_arrived): New function.
* cygserver_ipc.h (ipc_set_proc_info): Use _cygtls::ipc_set_proc_info to set
per-thread signal arrived value.
* cygthread.cc (cygthread::detach): Use per-thread signal_arrived via
set_thread_waiting.
* fork.cc (_cygtls::fixup_after_fork): Clear signal_arrived.
(_cygtls::remove): Close any signal_arrived handle when thread exists.
(_cygtls::find_tls): Remove unneeded function.
* cygtls.h: Update copyright.
(class _cygtls): Reorganize to help avoid rebuilding newlib when structure
changes.
(_cygtls::event): Delete.
(_cygtls::threadkill): Ditto.
(_cygtls::signal_waiting): Declare new bool.
(_cygtls::find_tls): Delete declaration.
(_cygtls::set_threadkill): Ditto.
(_cygtls::reset_threadkill): Ditto.
(_cygtls::set_signal_arrived): Declare new function.
(class set_thread_waiting): Declare new class.
* cygwait.cc (cw_nowait_storage): Define.
(cygwait): Set per-thread signal_arrived via set_thread_waiting. Don't
special-case _main_tls.
* cygwait.h (cw_nowait): Define.
(cw_infinite): Ditto.
(cygwait): Redefine pathological wait-only case.
* dcrt0.cc (dll_crt0_0): Remove call to now-defunct events_init().
(dll_crt0_1): Remove call to now-defunct create_signal_arrived().
* exceptions.cc: Reflect set_signal_mask() argument reordering throughout.
Remove signal mask synchronization throughout.
(events_init): Delete definition.
(mask_sync): Delete now-unneeded mask synchronization.
(set_signal_mask): Reverse order of arguments to "standard" to, from layout.
Rename "newmask" argument to "setmask". Remove debugging.
(sig_handle_tty_stop): Use cancelable_wait rather than WFMO.
(_cygtls::interrupt_setup): Don't treat "threadkill" events specially.
Conditionally set signal_arrived depending on whether the thread has created it
or not.
(sigpacket::process): Reorganize to reflect thread-specific sending of signals
which is more in line with the way it was actually supposed to work.
* fhandler_socket.cc (get_inet_addr): Use cancelable_wait rather than
IsEventSignalled to avoid potential race.
(fhandler_socket::wait_for_events): Set signal_arrived event using
set_thread_waiting().
(fhandler_socket::close): Use cygwait for the case of just waiting 10 ms for a
signal.
* fhandler_tape.cc (fhandler_dev_tape::_lock): Use cancelable_wait rather than
WFMO. Redo switch/case tests accordingly.
* fhandler_termios.cc (fhandler_termios::bg_check): Use cygwait for case of
just waiting 0 ms for a potential signal.
* fhandler_tty.cc (fhandler_pty_master::process_slave_output): Use
cancelable_wait rather than WFSO.
* fhandler_windows.cc (fhandler_windows::read): Set per-thread signal_arrived
via set_thread_waiting().
* flock.cc (lf_setlock): Ditto.
* select.cc (pselect): Ditto. Set per-thread signal_arrived using
set_thread_waiting().
* gendef: Don't special case handling of _cygtls::sig for threads.
* gentls_offsets: Use #pragma once in tlsoffsets.h.
* ntdll.h: Use #pragma once.
* poll.cc: Reflect set_signal_mask() argument reordering.
* posix_ipc.cc (ipc_mutex_lock): Use cancelable_wait rather than WFMO.
(ipc_cond_timedwait): Set perl-thread signal arrived using
set_thread_waiting().
* security.h: Use #pragma once.
* signal.cc (abort): Reflect set_signal_mask() argument reordering.
(clock_nanosleep): Ditto. Change call to cancelable_wait to properly specify
handling of cancel and interrupt.
(sigwaitinfo): Remove handling of per-thread event in favor of per-thread
signal_arrived. Use cancelable_wait rather than WFSO.
* sigproc.cc (signal_arrived): Delete definition.
(create_signal_arrived): Ditto.
* sigproc.h (signal_arrived): Delete declaration.
(set_signal_mask): Avoid defining as a "C" function. Don't conditionally
declare.
(create_signal_arrived): Delete declaration.
* syscalls.cc (rename): Use cygwait() rather than WFSO.
* thread.h (fast_mutex::lock): Use cw_infinite rather than LARGE_NULL.
* wait.cc (wait4): Ditto.
* thread.cc (pthread_mutex::lock): Ditto.
(pthread::join): Ditto.
(semaphore::_wait): Ditto.
(pthread_kill): Remove set_threadkill() accommodation.
* tlsoffsets.h: Regenerate.
(pinfo::wait): Change some comments.
(pinfo::prefork): Move a comment.
(pinfo::postfork): Set pending_*_pipe variables to NULL if closed.
(pinfo::postexec): Use right name when closing handle.
(_pinfo::alert_parent): Ditto.
* sigproc.h (hold_everything): Remove debugging label.
* fhandler.h: Use #pragma once rather than ifdef guards.
(fhandler_console::tc_getpgid): Return our pgid if we have never opened a
console.
* fork.cc: Rearrange includes to accommodate fhandler.h use of pinfo.h.
* sigproc.cc: Ditto.
* spawn.cc: Ditto.
(child_info_spawn::worker): Query myself->pgid rather than calling expensive
function.
* thread.h: Use #pragma once rather than ifdef guards.
* pinfo.h: Use #pragma once rather than ifdef guards.
(pinfo::remember): Don't define if sigproc.h has not been included.
(pinfo::reattach): Ditto.
* sigproc.h: Use #pragma once rather than ifdef guards. Use different test to
see if pinfo.h has been included.
console.
* fhandler.cc (fhandler_base_overlapped::wait_overlapped): Add temporary kludge
to work around problem of make closing a handler while it is being read.
* gendef (sigdelayed): Don't call a function if sig has been cleared.
* sigproc.h (cygwait): Simplify slightly.
information.
* exceptions.cc (_cygtls::inside_kernel): Modernize comment. Consider
executing a DLL from the Wow64 directory as being "in the kernel".
(_cygtls::call_signal_handler): For now, only deal with main_tls signals if
main_tls is known to be executing in the cygwin DLL. To more closely emulate
linux, consider the operation to be restartable if not executing in the main
thread.
* globals.cc (windows_system_directory): Remove NO_COPY.
(windows_system_directory_length): Ditto.
(system_wow64_directory): New variable.
(system_wow64_directory_length): Ditto.
* select.cc (cygwin_select): Don't issue a EINTR on non-main threads since that
seems to be what Linux does. Add missing break to signal case/switch.
(select_stuff::wait): Don't issue a EINTR on non-main threads since that seems
to be what Linux does. Remove now-unneeded accommodation for
WAIT_IO_COMPLETION. Add a comment.
* sigproc.h (cygwait): Ditto. Don't return if signal_received noticed and it's
not the main thread.
* signal.cc (sigprocmask): Add standard syscall debug stuff.
* thread.cc (pthread_sigmask): Ditto.
(peek_windows): Report on HWND handle used in queries.
* select.h: Update copyright.
* sigproc.h (cygwait): Eliminate multi-argument variety since more general
implementation may cause odd problems in select. Also force to always be
inline.
for stuff".
* fhandler.cc (fhandler_base_overlapped::wait_overlapped): Use simplified arg
form of cygwait.
* fhandler_console.cc (fhandler_console::read): Ditto.
* fhandler_audio.cc (fhandler_dev_dsp::Audio_out::waitforspac): Ditto.
(fhandler_dev_dsp::Audio_in::waitfordata): Ditto.
* fhandler_fifo.cc (fhandler_fifo::wait): Ditto.
* fhandler_serial.cc (fhandler_serial::raw_read): Ditto.
(fhandler_serial::raw_write): Ditto.
* select.cc (cygwin_select): Ditto.
* sigproc.h (cygwait): Rename from cygWFMO. Define two argument and single
argument forms of this function.
* fhandler_tty.cc (fhandler_pty_slave::open): Use method to query if tty is
open.
(fhandler_pty_slave::read): Send SIGHUP when master is detected as closed.
(fhandler_pty_common::close): Close input_available_event in callers since
master may need to signal it first.
(fhandler_pty_master::close): Lie and set input_available_event when closing,
then close input_available_event.
(fhandler_pty_slave::close): Close input_available_event explicitly here.
* tty.h (tty::is_master_closed): Declare new method.
never remember what it stands for.
(sig_handle_tty_stop): Remove obsolete call to sig_handle_tty_stop.
(_cygtls::call_signal_handler): Rework to grab signal information from
_main_tls if none is set for _my_tls. Try harder to keep thread locked.
(reset_signal_arrived): Delete.
* fhandler.cc (fhandler_base_overlapped::wait_overlapped): Use new cygWFMO call
to wait for an event + standard cygwin stuff. Modify debug output to
acccomodate new function.
* fhandler_console.cc (fhandler_console::read): Replace WaitForMultipleObjects
with cygWFMO.
* fhandler_socket.cc (get_inet_addr): Add comment.
* gendef (_sigdelayed): Remove call to reset_signal_arrived.
* sigproc.cc (_cygtls::signal_exit): Don't close my_readsig here unless we're
in the signal thread.
(create_signal_arrived): Create signal_arrived as auto-reset so that only one
thread is woken when a signal arrives.
* sigproc.h (cygWFMO): New function.
(reset_signal_arrived): Delete declaration.
Throughout rename _PROC_* to _CH_*.
* child_info.h: Include "pinfo.h".
(child_info_types): Rename _PROC_* -> _CH_* to avoid confusion with similarly
named constants.
(_PROC_*): Delete unneeded aliases.
(PROC_*): Ditto.
(CURR_CHILD_INFO_MAGIC): Ditto.
(cchildren): Define using "pinfo_minimal".
(child_info::set_saw_ctrl_c): Move to
(child_info_spawn::set_saw_ctrl_c): Here.
(child_info_spawn::lock): New field.
(child_info_spawn::hExeced): Ditto.
(child_info_spawn::ev): Ditto.
(child_info_spawn::~child_info_spawn): Move to sigproc.cc.
(child_info_spawn::child_info_spawn): Ditto.
(child_info_spawn::cleanup): Declare new function.
(child_info_spawn::set_saw_ctrl_c): Move to this class. Set flag only when
execed and return true when we have set the flag.
(child_info_spawn::child_info_spawn::signal_myself_exited): New function.
(child_info_spawn::wait_for_myself): Ditto.
(child_info_spawn::has_execed_cygwin): Ditto.
(child_info_spawn::has_execed): Ditto. Replaces "hExeced" test.
(child_info_spawn::operator HANDLE&): New operator.
(child_info_spawn::worker): Define old "spawn_guts" as class member.
(ch_spawn): Declare.
(have_execed): Define.
(have_execed_cygwin): Ditto.
* cygheap.h: Update comment.
* dcrt0.cc (get_cygwin_startup_info): Use _CH_* enums.
(child_info_spawn::handle_spawn): Ditto.
(dll_crt0_0): Ditto.
(multiple_cygwin_problem): Ditto.
* exceptions.cc (chExeced): Delete obsolete declaration.
(ctrl_c_handler): Reference set_saw_ctrl_c via new ch_spawn global.
* globals.cc (hExeced): Delete.
* pinfo.cc (pinfo::thisproc): Refer to cygheap as ::cygheap for consistency in
handle naming when -DDEBUGGING.
(pinfo::init): Accommodate case where myself.h is known but h0 is passed in.
(pinfo::pinfo): New constructor for setting up a pinfo passed in by previous
exec'or.
(pinfo::proc_waiter): Don't handle subprocess if we're in the process of
exiting due to an exec of a cygwin process. Don't close rd_proc_pipe here.
Close it when we actually are finished with the process. Use new
ch_spawn.signal_myself_exited function to let exec stub know that subprocess
has exited.
(pinfo::wait): Clarify debugging output.
(pinfo::release): Use "close_h" to close all handles to avoid races.
(winpids::add): Assume that elements of the array do not need to be zeroed and
are properly initialized or suffer problems on pinfo::release. Don't close
hProcess since release does that now.
* pinfo.h: Update comment.
(pinfo_minimal): Move some elements from pinfo here so that child_info_spawn
can use them.
(pinfo): Inherit from pinfo_minimal.
(pinfo::pinfo): Modify to accommodate new pinfo_minimal.
(pinfo::allow_remove): New function.
* sigproc.cc (proc_subproc): Use boolean values for true/false. Implement
PROC_EXEC_CLEANUP.
(proc_terminate): Set ppid = 1 since the procs list will only be iterated when
the process has not execed. Don't do any cleanup here since it is now handled
in pinfo::release.
(sigproc_init): Initialize sync_proc_subproc earlier.
(child_info::child_info): Assume that all important fields are properly
initialized and avoid memset().
(child_info_spawn::child_info_spawn): Specifically test for execing and then
set up appropriate fields in the struct.
(child_info_spawn::cleanup): Define new function.
(child_info_spawn::record_children): Specifically test for being execed here.
Fill in pinfo_minimal part of children array.
(child_info_spawn::reattach_children): Use constructor to duplicate information
for previous exec'or. Add more debugging output.
(remove_proc): Force deletion of thread when exiting due to exec. Rely on
pinfo::cleanup in release.
* sigproc.h (PROC_EXEC_CLEANUP): New enum.
(PROC_DETACHED_CHILD): Delete.
* spawn.cc (chExeced): Delete.
(child_info_spawn::worker): Rename from spawn_guts. Use elements of
child_info_spawn throughout rather than ch.whatever. Use ::cygheap to refer to
global rather than element of child_info. Use wait_for_myself() rather than
waitpid(). Call child_info_spawn::cleanup on function return.
(spawnve): Reflect movement of spawn_guts functionality into
child_info_spawn::worker.
* syscalls.cc (popen): Ditto.
* winsup.h (spawn_guts): Delete declaration.
(child_info_spawn::nchildren): Rename from nprocs.
(child_info_spawn::children): Change type to cchildren for more bookkeeping
possibilities.
(child_info_spawn::child_info_spawn): Clear nchildren.
(child_info_spawn::record_children): Declare new function.
(child_info_spawn::reattach_children): Ditto.
* dcrt0.cc (child_info_spawn::handle_spawn): Call reattach_children to gather
list of processes we are potentially waiting for.
* pinfo.h (pinfo::pinfo): Make sure that rd_proc_pipe is always cleared.
(pinfo::reattach): New function.
* sigproc.cc: Move pinfo.h earlier so that it can be used in sigproc.h.
(get_proc_lock): Don't bother with a lock during DLL initialization.
(proc_subproc): Handle PROC_REATTACH_CHILD.
(proc_terminate): Orphan children only when we are not an execed process or
when the pid is about to be occupied by a non-cygwin process.
(child_info_spawn::record_children): Define new function.
(child_info_spawn::reattach_children): Ditto.
* sigproc.h (procstuff): Define PROC_REATTACH_CHILD and renumber other
elements.
* spawn.cc (spawn_guts): Record any to-be-waited-for subprocesses if about to
exec a cygwin process.
* sigproc.cc (sig_send): Fix harmless transposition of fifth and six arguments
to DuplicateHandle().
(child_info::child_info): Ditto.
* globals.cc (hExeced): Make NO_COPY.
pseudo signal to process group instead of just calling
init_console_handler.
* sigproc.cc (wait_sig): Call init_console_handler here on __SIGSETPGRP
signal.
* sigproc.h (__SIGSETPGRP): Define.
__name.
* cygthread.h (cygthread::cygthread): Create versions which eliminate 'n'
parameter.
* dcrt0.cc (dll_crt0_1): Remove check for threadfunc_ix. Remove obsolete
comments. Set process_state to active here.
* fhandler_netdrive.cc (create_thread_and_wait): Use shortened cygthread
constructor.
* timer.cc (timer_tracker::settime): Ditto.
* window.cc (HWND): Ditto.
* fhandler_tty.cc: Use shortened cygthread constructor, where appropriate,
throughout.
* select.cc: Ditto.
* fork.cc (frok::child): Remove wait_for_sigthread.
(fork): Reformat if for slightly better clarity.
* init.cc (dll_finished_loading): New variable.
(dll_entry): Use dll_finished_loading to determine when we should call
merge_threadfunc.
* sigproc.cc (no_signals_available): Simplify by using my_readsig.
(wait_sig_inited): Delete.
(wait_sig): Define as void function.
(pending_signals): Accommodate change to wait_sig definition.
(wait_for_sigthread): Delete definition.
(sigproc_init): Initialize signal pipe here, before wait_sig thread is created.
Use void form of cygthread creation.
(init_sig_pipe): Delete.
(wait_sig): Return void rather than DWORD. Assume previous initialization of
signal pipe. Set my_sendsig to NULL when exiting.
* sigproc.h (wait_for_sigthread): Delete declaration.
* sigproc.cc (wait_for_sigthread): Ditto. Don't synchronize with wait_sig
after receiving an event that it is ready to go.
(init_sig_pipe): New function.
(wait_sig): Call init_sig_pipe to create pipes for communicating signals to
this process. Don't send sigCONT signal when initializing.
* fork.cc (frok::child): Accommodate wait_for_sigpipe parameter change.
* fhandler.h (fhandler_*::write): Make ssize_t/__stdcall.
(fhandler_*::write_overlapped): Ditto.
(fhandler_*::raw_write): Ditto.
(fhandler_*::readv): Ditto.
(fhandler_*::writev): Ditto.
(fhandler_*::raw_read): Make __stdcall.
* fhandler: Accommodate changes to read/write functions throughout.
* fhandler_clipboard.cc: Ditto.
* fhandler_console.cc: Ditto.
* fhandler_dsp.cc: Ditto.
* fhandler_fifo.cc: Ditto.
* fhandler_mailslot.cc: Ditto.
* fhandler_mem.cc: Ditto.
* fhandler_mem.cc: Ditto.
* fhandler_random.cc: Ditto.
* fhandler_tape.cc: Ditto.
* fhandler_tty.cc: Ditto.
* fhandler_virtual.cc: Ditto.
* fhandler_windows.cc: Ditto.
* fhandler_zero.cc: Ditto.
* syscalls.cc (readv): Use ssize_t as temp variable.
* fhandler.cc (fhandler_base::read): Coerce returned len to signed or it will
never be treated as < 0.
(fhandler_base::wait_overlapped): Minimize calls to GetLastError. Remove
duplicate debugging test. Fix error return.
* fhandler.h (fhandler_fifo::fifo_name): Declare new function.
(fhandler_fifo::close): Ditto.
(fhandler_fifo::dup): Ditto.
(fhandler_fifo::close_on_exec): Ditto.
* fhandler.cc (fhandler_fifo::fifo_name): Define new function.
(FIFO_BUF_SIZE): New define.
(cnp): Ditto.
(fhandler_fifo::open): Rework. Use cnp to open named pipe. Always open write
side as a client. Open dummy client when writing and can't connect.
(wait): Rework. Implement fifo_wait_for_next_client. Handle signals during
connect better. Add new fifo_wait_for_server code which polls
(sigh) waiting for server.
(fhandler_fifo::raw_read): Handle transition states when one client closes and
another is available.
(fhandler_fifo::close): Define.
(fhandler_fifo::dup): Ditto.
(fhandler_fifo::close_on_exec): Ditto.
be used by subsequent startup functions.
(dll_crt0_0): Issue a warning if DuplicateTokenEx fails and DEBUGGING.
(dll_crt0_1): Move user_data->{resourcelocks,threadinterface} initialization
here from dll_crt0_0.
* fork.cc (frok::child): Tell wait_for_sigthread that this is fork.
(frok::parent): Only initialize start_time once. Tighten time when we're
"deimpersonated".
* sigproc.cc (signal_fixup_after_exec): Rework (futiley) sa_buf stuff. Add
debugging output.
(wait_for_sigthread): Accept an argument which illustrates whether we are
forked or not.
(wait_sig): Avoid using myself pointer.
* winsup.h ((wait_for_sigthread): Reflect change to argument.
* sigproc.h (struct sipacket::thread_handle): Put thread_handle here.
* sigproc.cc (sigproc_terminate): Move setting of thread_handle...
(sig_send): ...to here. Put it in packet being sent. Only close pack.wakeup
when we're waiting for completion.
(wait_sig): Use thread_handle directly from received packet.
(handle_exceptions): Use _sig_tls rather than sigtid to determine if this is
the signal thread.
(set_signal_mask): Ditto for conditionalized CGF code.
* pinfo.cc (pinfo::exit): Exit the thread if we forcefully terminated the main
thread
* sigproc.cc (sigtid): Delete.
(_sig_tls): Define.
(sig_clear): Use _sig_tls rather than sigtid to determine if this is the signal
thread.
(sig_dispatch_pending): Ditto.
(wait_sig): Set _sig_tls here.
* dcrt0.cc (do_exit): Move sigproc_terminate call later since signal handling
was still needed for subsequent stuff. Call sigproc_terminate with new
exit_state value.
* pinfo.cc (pinfo::exit): Call sigproc_terminate with new exit_state value.
* sigproc.cc (proc_terminate): Remove unnecessary (void) parameter.
(sigproc_terminate): Ditto. Add new argument to accept exit state to be set.
(wait_sig): Reorganize __SIGEXIT handling. Add more debugging output.
* winsup.h (sigproc_terminate): Declare with new exit_state argument.
(exit_states): Reorganize to reflect new exit ordering of sigproc_terminate.
appropriately.
* pinfo.cc (pinfo::exit): Always call sigproc_terminate here. Rely on
sigproc_terminate to signal signal thread to handle eventual process exit.
* sigproc.cc (no_signals_available): Change criteria for determining if this
process can handle signals to itself.
(my_sendsig): New variable. Copy of my sendsig handle.
(proc_can_be_signalled): Don't send signals if exit code is set.
(sigproc_terminate): Use and set exit_state appropriately to determine when to
do anything. Send __SIGEXIT to self to control process exit.
(sig_send): Use my_sendsig for sending signals. Don't call
proc_can_be_signalled for myself since the criteria is now different for
sending signals to myself.
(wait_sig): Copy myself->sendsig to my_sendsig for future use. Exit signal
loop when __SIGEXIT is received. Wait for main thread to exit and use its exit
status to actually exit process.
* sigproc.h (__SIGEXIT): New enum.
* dcrt0.cc (alloc_stack): Eliminate superfluous "return;".
* debug.cc (add_handle): Ditto.
* devices.in (device::parse): Ditto.
* dtable.cc (dtable::vfork_parent_restore): Ditto.
(dtable::vfork_child_fixup): Ditto.
* environ.cc (parse_options): Ditto.
* errno.cc (seterrno_from_win_error): Ditto.
* exceptions.cc (sig_handle_tty_stop): Ditto.
(set_signal_mask): Ditto.
* fhandler.cc (fhandler_base::read): Ditto.
(fhandler_base::operator delete): Ditto.
(fhandler_base::seekdir): Ditto.
(fhandler_base::rewinddir): Ditto.
* fhandler_console.cc (fhandler_console::read): Ditto.
(fhandler_console::fixup_after_exec): Ditto.
* sigproc.cc (sigproc_init): Ditto.
(sigproc_terminate): Ditto.
* devices.cc: Regenerate.
by reference.
* signal.cc (abort): Accommodate change to set_signal_mask.
* select.cc (pselect): Ditto.
* exceptions.cc (handle_sigsuspend): Ditto.
(ctrl_c_handler): Ditto.
(sighold): Ditto.
(sigrelse): Ditto.
(set_process_mask_delta): Ditto.
(_cygtls::call_signal_handler): Ditto.
* fhandler_disk_file.cc (fhandler_disk_file::readdir): Return ENMFILE if
__handle is not set. Set __handle to NULL when out of files.
(fhandler_disk_file::rewinddir): Don't close handle if it's NULL.
(fhandler_disk_file::closedir): Ditto.
Corinna Vinschen
Christopher Faylor