- Store the exception program counter (from EPCR) and exception status
register (from ESR) also during the exception. A runtime system may
replace them thereby to implement a thread switch.
* or1k/exception-asm.S: Store missing state
- We do not need a red zone here, as we do not operate on the current
stack, but always use the clear exception stack. Also reserve two
extra words for the context to store EPCR and ESR.
* or1k/crt0.S: Fix exception stack frame
* or1k/exception-asm.S: ditto
- During interrupt handling the PICSR, table pointers and current
interrupt line have been saved in incorrect registers and/or stored on
the stack.
- Save the pointer in r16/r18, PICSR in r20 and the current interrupt
line in r22. Those are callee-saved registers, so that the register
values will be preserved.
* or1k/interruts-asm.S: Change registers to callee-saved.
* msp430/msp430-sim.ld (.stack): Add an assertion to make sure
that the data area does not overrun the stack. PROVIDE a new
symbol __stack_size to allow the user to set the limit.
* msp430/msp430xl-sim.ld (.stack): Likewise.
* rl78/rl78-sim.ld (.stack): Likewise.
* rl78/rl78.ld (.stack): Likewise.
* rx/rx-sim.ld (.stack): Likewise.
* rx/rx.ld (.stack): Likewise.
* msp430/msp430.ld: Delete.
* msp430/msp430F5438A-l.ld: Delete.
* msp430/msp430F5438A-s.ld: Delete.
* msp430/crt_movedata.S: Delete.
* msp430/Makefile.in (SCRIPTS): Remove msp430.ld.
(CRT_OBJS): Add crt_move_highdata.o.
* msp430/memmodel.h (START_CRT_FUNC): New macro.
(END_CRT_FUNC): New macro.
(WEAK_DEF): New macro.
* msp430/crt0.S: Use new macros.
(move_highdata): New code to initialise the .data section if it is
held in high memory.
* msp430/msp430-sim.ld (.data): Add .either.data.
(.rodata2): Move some read-only data sections here.
(.text): Add .either.text.
(.rodata): Add .either.rodata.
(.bss): Add .either.bss.
* msp430/msp430xl-sim.ld (MEMORY): Add HIROM.
(.rodata2): Move some read-only data sections here.
(.upper.data): New section. Include notes about how to initialise
it.
* libc/include/sys/config.h: Move evaluation of _UINTPTR_EQ_ULONG and
_UINTPTR_EQ_ULONGLONG from here...
* libc/include/sys/_intsup.h: ...to here. Rename to _INTPTR_EQ_LONG
and _INTPTR_EQ_LONGLONG to refer to signed base type. Add test for
base type of int32_t and set _INT32_EQ_LONG accordingly.
* libc/include/stdint.h: Change checks for __have_long32 to checks
for _INT32_EQ_LONG.
* libc/include/inttypes.h: Ditto. Accommodate aforementioned name
change.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
* path.cc (path_conv::set_nt_native_path): New function.
* path.h (path_conv::set_nt_native_path): Add prototype.
* syscall.cc (try_to_bin): Handle moving files to the recycler
accessed via a local virtual drive (subst). Fix a problem renaming
the file to the unique replacement name on Samba. Align comment.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
* fhandler_tty.cc (fhandler_pty_slave::fch_close_handles): Don't close
handles not opened via fhandler_pty_slave::fch_open_handles.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
* fhandler.h (class fhandler_base): Add virtual function
get_io_handle_cyg() to get handle from which OPOST-processed output is
read on PTY master.
(class fhandler_pty_slave): Add variable output_handle_cyg to store a
handle to which OPOST-processed output is written. Add two functions,
i.e., set_output_handle_cyg() and get_output_handle_cyg(), regarding
variable output_handle_cyg. Now, output_handle is used only by native
windows program. The data before OPOST-processing is written to
output_handle and OPOST-processing is applied in the master-side. For a
cygwin process, OPOST-processing is applied in the slave-side, and the
data after OPOST-processing is written to output_handle_cyg.
(class fhandler_pty_master): Add two variables, i.e., io_handle_cyg and
to_master_cyg, to store handles of a pipe through which OPOST-processed
output passes. Add pty_master_fwd_thread and function
pty_master_fwd_thread() for a thread which applies OPOST-processing
and forwards data from io_handle to to_master_cyg. Add function
get_io_handle_cyg() regarding variable io_handle_cyg. Now, the pipe
between io_handle and to_master are used only by native windows program
for applying OPOST-processing in the master-side. For a cygwin process,
the pipe between io_handle_cyg and to_master_cyg is used for passing
through the data which is applied OPOST-processing in the slave-side.
* fhandler_tty.cc (struct pipe_reply): Add member to_master_cyg.
(fhandler_pty_master::process_slave_output): Read slave output from
io_handle_cyg rather than io_handle.
(fhandler_pty_slave::fhandler_pty_salve): Initialize output_handle_cyg.
(fhandler_pty_slave::open): Set output_handle_cyg by duplicating handle
to_master_cyg on PTY master.
(fhandler_pty_slave::close): Close handle output_handle_cyg.
(fhandler_pty_slave::write): Write data to output_handle_cyg rather
than output_handle.
(fhandler_pty_slave::fch_close_handles): Close handle output_handle_cyg.
(fhandler_pty_master::fhandler_pty_master): Initialize io_handle_cyg,
to_master_cyg and master_fwd_thread.
(fhandler_pty_master::cleanup): Clean up to_master_cyg as well.
(fhandler_pty_master::close): Print to_master_cyg as well in debug
message. Terminate master forwarding thread. Close handles
to_master_cyg and io_handle_cyg.
(fhandler_pty_master::ioctl): Use io_handle_cyg rather than to_master.
(fhandler_pty_master::pty_master_thread): Add code for duplicating
handle to_master_cyg.
(fhandler_pty_master::pty_master_fwd_thread): New function for a thread
to forward OPOST-processed data from io_handle to to_master_cyg. This
thread applies OPOST-processing to the output of native windows program.
(::pty_master_fwd_thread): Ditto.
(fhandler_pty_master::setup): Create a new pipe to pass thruegh OPOST-
processed output. Create new thread to forward data from io_handle to
to_master_cyg. Set handle to_master_cyg to tty. Print io_handle_cyg as
well in debug message. Close handles io_handle_cyg and to_master_cyg in
case of error.
(fhandler_pty_master::fixup_after_fork): Set handle to_master_cyg to
tty. Copy handle to_master_cyg from arch->to_master_cyg.
(fhandler_pty_master::fixup_after_exec): Clean up to_master_cyg.
* select.cc: Check handle returned by get_io_handle_cyg() rather than
get_handle().
* tty.h (class tty): Add variable _to_master_cyg to store a handle to
which OPOST-processed data is written. Add two functions,
to_master_cyg() and set_to_master_cyg(), regarding _to_master_cyg.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
* path.cc (basename): Undefine basename before defining function to
avoid type collision with prototype in string.h.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
This header was clearly copied from the common syscall.h and customized,
but the header comment is no longer accurate -- this isn't the general
file anymore.
* sec_acl.cc (set_posix_access): Apply mask only in terms of execute bit
for SYSTEM and Admins group.
* getfacl.c (main): Special-case SYSTEM and Admins group. Add comments.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
The inline list of mount options seemed redundant, so the paragraph now points
to the list below it.
List of executable extensions updated according to fhandler_disk_file.cc. List
of executable magic numbers updated according to path.h (has_exec_chars).
* pathnames.xml: Fix inconsistencies in docs regarding fstab and
executable file detection
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
* sec_acl.cc (set_posix_access): Don't create DENY ACEs for USER and
GROUP entries if they are the same as USER_OBJ or GROUP_OBJ.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
* fhandler.h (fhandler_pty_slave::facl): Add prototype.
* fhandler_tty.cc (fhandler_pty_slave::facl): New method.
(fhandler_pty_slave::fchown): Fix uid/gid handling.
* sec_acl.cc (set_posix_access): Drop superfluous class_idx variable.
Simplify and move around code in a few places. To improve ACL
readability, add r/w permissions to Admins ACE appended to pty ACL.
Add comment to explain Windows ACE Mask filtering being in the way of
creating a real CLASS_OBJ.
(get_posix_access): Fake CLASS_OBJ for ptys. Explain why.
* security.cc (get_object_attribute): Add S_IFCHR flag to attributes
when calling get_posix_access.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
* sec_acl.cc (set_posix_access): Move merging group perms into owner
perms in case of owner == group after mask has been computed. Take
mask into account when doing so to avoid unnecessary ACCESS_DENIED_ACE.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
* fhandler_disk_file.cc (fhandler_disk_file::fchmod): Deliberatly
set GROUP_OBJ and CLASS_OBJ perms to new group perms. Add comment
to explain why.
* security.cc (set_created_file_access): Ditto.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
* sec_acl.cc (set_posix_access): Replace previous patch. Return
EINVAL if uid and/or guid is invalid and not backed by an actual
Windows account.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
* setfacl.c: Align more to Linux tool.
(delacl): New function to delete acl entries only.
(modacl): Drop delete functionality. Add handling of recomputing the
mask and default mask values.
(delallacl): Rename from delacl.
(setfacl): Call delacl in Delete case. Call delallacl in DeleteAll
and DeleteDef case.
(usage): Accommodate new options. Rearrange and rephrase slightly.
(longopts): Emit 'x' in --delete case. Add --no-mask and --mask
options.
(opts): Add -x and -n options.
(main): Handle -d and -x the same. Handle -n and --mask options.
Drop handling for -r option.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
* sec_acl.cc (get_posix_access): Don't use GROUP_OBJ access to fix up
CLASS_OBJ mask on old-style ACLs. Fix a comment.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
* sec_acl.cc (set_posix_access): Always make sure Admins have
WRITE_DAC and WRITE_OWNER permissions.
* security.h (create_object_sd_from_attribute): Drop handle parameter
from prototype.
* security.cc (create_object_sd_from_attribute): Drop handle parameter.
Just create the standard POSIXy security descriptor.
(set_object_attribute): Accommodate dropped paramter in call to
create_object_sd_from_attribute.
* fhandler_tty.cc: Ditto, throughout.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
* shm.cc (shmget): Fetch segment size from server rather than using
size argument to accommodate existing segments. Add comment to explain
why.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
* include/cygwin/version.h (CYGWIN_VERSION_DLL_MAJOR): Bump to 2000.
(CYGWIN_VERSION_DLL_MINOR): Set to 0.
* new-features.xml (ov-new2.0): Rename from ov-new1.7.36 and change
version number to 2.0.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
* exceptions.cc (call_signal_handler): Only bother to construct
the ucontext for signal handlers with SA_SIGINFO set. Set
mcontext.oldmask.
Signed-off-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Jeff Johnston
Nick Clifton
Corinna Vinschen
Yaakov Selkowitz
Mike DePaulo
Takashi Yano
Mike Frysinger
David Macek
Jon TURNEY