set_socketpair_eids.
* fhandler_socket.cc (fhandler_socket::set_socketpair_eids): New method.
(fhandler_socket::dup): Duplicate sec_pipe if necessary.
(fhandler_socket::listen): Only create sec_pipe if named pipes are
available. Initialized sec_peer_pid to 0 as on Linux.
(fhandler_socket::connect): Only run eid credential transaction if
named pipes are available. Fake otherwise. Initialized sec_peer_pid
to 0 as on Linux.
(fhandler_socket::accept): Ditto.
(fhandler_socket::close): Move closing sec_pipe handle from here...
(fhandler_socket::~fhandler_socket): ... to here.
* net.cc (socketpair): Set eid credentials by calling
fhandler_socket::set_socketpair_eids() on both socket ends.
* wincap.h (wincaps::has_named_pipes): New element.
* wincap.cc: Implement above element throughout.
* pinfo.cc (_pinfo::set_ctty): to here.
* fhandler_mem.cc (fhandler_dev_mem::fstat): Don't fill out structure if this
is an on-disk device rather than an "auto" device.
* fhandler_raw.cc (fhandler_dev_raw::fstat): Ditto.
* path.cc (normalize_posix_path): Don't treat a standalone '//' as introducing
a UNC path.
(normalize_win32_path): Ditto.
* pinfo.h (_pinfo::exists): Declare "new" function.
(_pinfo::kill): Ditto.
* fhandler_termios.cc (tty_min::kill_pgrp): Use _pinfo::exists rather than
proc_exists.
* pinfo.cc (pinfo::init): Ditto. Don't do a low_priority_sleep(0) when looping
to find exec'ed procinfo.
(pinfo::release): Be more careful about unmapping and closing.
* signal.cc (_pinfo::kill): Rename from kill_worker. Accommodate entry into
_pinfo class.
(kill0): Use _pinfo::kill rather than kill_worker.
(kill_pgrp): Ditto. Use _pinfo::exists rather than proc_exists.
* sigproc.cc (_pinfo::exists): Rename from proc_exists.
(pid_exists): Use _pinfo::exists rather than proc_exists.
(remove_proc): Ditto.
* sigproc.h (proc_exists): Delete declaration.
with additional flags parameter. Change offset parameter to _off64_t.
(class fhandler_disk_file): Ditto.
(class fhandler_dev_mem): Ditto.
* fhandler_mem.cc (fhandler_dev_mem::fixup_mmap_after_fork):
Accomodate new parameters.
* mmap.cc: Include ntdll.h.
(class mmap_record): Add flags member.
(mmap_record::mmap_record): Add flags parameter.
(mmap_record::get_flags): New method.
(class map): Add next_anon_addr member to store next anonymous mapping
address suggestion.
(map::get_next_anon_addr): New method.
(map::set_next_anon_addr): New method.
(mmap64): Don't align offset and length to granularity in case of
MAP_ANONYMOUS on NT. Check for already existing mapping only on 9x.
Call mmap_record::mmap_record with additional flags argument.
(fhandler_base::fixup_mmap_after_fork): Accomodate new parameters.
(fhandler_disk_file::mmap): Use NtMapViewOfSection with
AT_ROUND_TO_PAGE flag for anonymous mappings on NT. If addr is NULL,
try to map adjacent to previous mapping.
(fhandler_disk_file::fixup_mmap_after_fork): Add flags argument.
Change offset parameter to _off64_t. Use NtMapViewOfSection to
re-create anonymous mappings on NT.
(fixup_mmaps_after_fork): Accomodate new parameters when calling
fhandler's fixup_mmaps_after_fork function.
* ntdll.h (AT_ROUND_TO_PAGE): New define.
address parameter.
(mmap_record::map_pages): New method with address parameter.
(mmap64): Evaluate access mode before checking if already existing
mapping can be used.
Only use existing mapping if requested access mode matches the one
in the existing mapping.
Add check for existing mapping for MAP_FIXED case.
(dirname): Export.
* path.cc (basename): New function.
(dirname): New function.
* include/libgen.h: New file.
* include/cygwin/version.h: Bump API minor version.
* fhandler.cc (fhandler_base::fsync): Return with EINVAL if no
handle is available.
* syscalls.cc (fdatasync): Create export alias to fsync.
* include/cygwin/version.h: Bump API minor version.
dwVolumeSerialNumber argument. Drop default values for last three
arguments.
* fhandler_disk_file.cc (fhandler_base::fstat_by_handle): Pass
dwVolumeSerialNumber from GetFileInformationByHandle to fstat_helper.
(fhandler_base::fstat_by_name): Pass pc.volser () to fstat_helper.
Accomodate dropping default values for last three arguments of
fstat_helper.
(fhandler_base::fstat_helper): Add dwVolumeSerialNumber argument.
Use for st_dev member unless 0 in which case pc.volser () is used.
(FindNextVolumeA): Add.
(FindVolumeClose): Add.
(GetVolumePathNamesForVolumeNameA): Add.
* fhandler.h (class fhandler_base): Declare new method fsync.
* fhandler.cc (fhandler_base::fsync): New method.
* syscalls.cc (fsync): Move functionality into fhandler method fsync.
Just call this method from here.
(sync_worker): New static function.
(sync): Fill with life for NT systems.
* wincap.h (wincaps::has_guid_volumes): New element.
* wincap.cc: Implement above element throughout.
(fhandler_base::status.query_open): Add a bit to make room for more
states.
(class fhandler_base): Declare new method utimes.
(class fhandler_socket): Ditto.
(class fhandler_disk_file): Ditto.
(fhandler_disk_file::fhandler_disk_file): Add constructor with
path_conv parameter.
* fhandler.cc (fhandler_base::open): Add query_write_attributes
handling.
(fhandler_base::utimes): New method.
* fhandler_disk_file.cc (fhandler_disk_file::link): Simplify.
Open file with query_write_attributes instead of query_write_control.
(fhandler_disk_file::utimes): New method.
(fhandler_disk_file::fhandler_disk_file): Add constructor with
path_conv parameter setting pc member immediately.
* fhandler_socket.cc (fhandler_socket::fchmod): Use new
fhandler_disk_file constructor.
(fhandler_socket::fchown): Ditto.
(fhandler_socket::facl): Ditto.
(fhandler_socket::link): Ditto.
(fhandler_socket::utimes): New method.
* times.cc: Include dtable.h.
(timeval_to_filetime): Make non-static.
(utimes): Move functionality into fhandler method utimes. Just call
this method from here.
* winsup.h: Simplify declarations of time helper functions.
(timeval_to_filetime): Add extern declaration.
(class fhandler_socket): Ditto.
(class fhandler_disk_file): Ditto.
* fhandler.cc (fhandler_base::open): Add FILE_WRITE_ATTRIBUTES
to query_write_control access flags.
(fhandler_base::link): New method.
* fhandler_disk_file.cc (fhandler_disk_file::fchmod): Don't try to
open with O_WRONLY since query_write_control includes
FILE_WRITE_ATTRIBUTES.
(fhandler_disk_file::fchown): Ditto.
(fhandler_disk_file::facl): Ditto.
(fhandler_disk_file::link): New method. Touch st_ctime on successful
link.
* fhandler_socket.cc (fhandler_socket::link): New method.
* syscalls.cc (link): Move functionality into fhandler method link.
Just call this method from here.
fchmod and facl.
* fhandler_socket.cc (fhandler_socket::fstat): Handle AF_LOCAL
sockets.
(fhandler_socket::fchmod): New method.
(fhandler_socket::fchown): New method.
(fhandler_socket::facl): New method.
successful write.
* fhandler.h (fhandler_base::status_flags): Add 'has_changed' flag.
* fhandler_disk_file.cc (fhandler_disk_file::fchmod): Call
fhandler_disk_file's own open and close instead of open_fs and
close_fs. Mark as changed on success.
(fhandler_disk_file::fchown): Ditto.
(fhandler_disk_file::facl): Ditto.
(fhandler_disk_file::ftruncate): Ditto.
(fhandler_base::open_fs): Mark as changed when O_TRUNC flag on existing
file is set.
(fhandler_disk_file::close): Set st_ctime if has_changed flag is set.
(cygthread::terminate_thread): Eliminat racy code which reset ev and
thread_sync. Remove a few nonsensical inuse checks. Exit at the bottom.
(cygthread::detach): Rewrite to again try to ensure that we don't say we're
signalled when we are not signalled.
* fhandler.cc (fhandler_base::raw_read): Revert to signalling read success
quickly.
* pipe.cc (fhandler_pipe::close): Use base method to close handle.
* sigproc.h (WAIT_SIG_PRIORITY): Just trundle along at normal priority to allow
the pipe thread to do its thing if possible.
* pinfo.h (pinfo::zap_cwd): Declare new function.
(pinfo::zap_cwd): Move 'cd out of the way code' here.
(pinfo::exit): Use it here.
* spawn.cc (spawn_guts): And here.
Danny Smith <dannysmith@users.sourceforge.net>
* lib/directx/dinput_private.h (ATTRIBUTE_TEXT_SECTION): New
define for Open Watcom portability.
* lib/directx/(dinput_joy.c, dinput_joy2.c, dinput_kbd.c,
dinput_mouse.c, dinput_mouse2.c): Use new macro in definition
of local c_rgodfDI* objects. Replace .rdata section attribute
with 'const' keyword in definition of global c_dfDI* objects.
* cygthread.cc (cygthread::detach): Be more careful about ensuring that sigwait
is properly waited for to avoid later missynchronization.
(cygthread::terminate_thread): Return true if thread was actually terminated
and all handles were closed.
* fhandler_base.cc (fhandler_base::raw_read): Use signal_read_state rather than
raw calls to win32 api.
(fhandler_base::read): Ditto.
* fhandler.h (fhandler_pipe::fixup_after_exec): Use method to create read_state
signalling.
(fhandler_pipe::create): Ditto.
* Makefile.in: Make some more files -fomit-frame-pointer.
event in the event that the thread was actually in the process of exiting.
* pipe.cc (fhandler_pipe::dup): read_state is not supposed to be inheritable.
Fix that.
* path.cc (path_conv::check): Set symlen = 0 to avoid a compiler warning.
* devices.h (devices::parsedisk): Declare new function.
* devices.in (devices::parsedisk): Define new function.
* dtable.cc (dtable::init_std_file_from_handle): Use device numbers rather than
name.
* fhandler_proc.cc (format_proc_partitions): Use parsedisk to generate disk
names from numeric codes. (This was broken on two of my systems previously and
is still broken now)
"device:" entry.
* fhandler.h (fhandler_socket::open): New method.
(fhandler_pipe::open): New method.
* fhandler_proc.cc (fhandler_proc::exists): Return -2 in case of
/proc/self.
* fhandler_process.cc (fhandler_process::exists): Return -2 in
case of symlinks, -3 for pipes and -4 for sockets.
(fhandler_process::fstat): Handle pipes and sockets.
(fhandler_process::open): Handle opening /proc/<pid>/fd.
(fhandler_process::fill_filebuf): Generate empty names for
non exisiting file descriptors.
* fhandler_socket.cc (fhandler_socket::get_proc_fd_name): Always
generate "socket:[number]" strings as on Linux.
(fhandler_socket::open): New method.
(fhandler_socket::fstat): Always return socket type.
* path.cc (symlink_info::set): Remove unused second parameter.
(path_conv::check): Handle pipes and sockets in /proc.
Set correct device type for AF_LOCAL sockets.
* pinfo.cc (_pinfo::commune_recv): Generate empty names for
non exisiting file descriptors.
(_pinfo::fd): Ditto.
* pipe.cc (fhandler_pipe::open): New method.
(rnargLL): Ditto.
(__rn): Rename from 'rn', add a mask argument, and use the mask argument to
control how many significant digits to care about.
(__small_vsprintf): Use __rn, rnarg, rnargLL, as appropriate.
fhandlers.
* dtable.h (class dtable): Add cygheap_fdenum as friend class.
* fhandler.h (fhandler_base::get_proc_fd_name): New virtual method
to return a name for /proc/<pid>/fd.
(fhandler_socket::get_proc_fd_name): Ditto.
(fhandler_pipe::get_proc_fd_name): Ditto.
(fhandler_virtual::opendir): Make virtual method.
(fhandler_process::opendir): New method.
* fhandler.cc (fhandler_base::get_proc_fd_name): New method.
* fhandler_process.cc: Include ctype.h.
(PROCESS_FD): Define.
(process_listing): Add "fd".
(fhandler_process::exists): Fix comment. Return 1 in case of "fd"
directory. Handle files below "fd".
(fhandler_process::fstat): Drop "self" handling. Set correct link
count for directories.
(fhandler_process::opendir): New method to handle "fd" directory.
(fhandler_process::readdir): Add "fd" handling.
(fhandler_process::open): Drop "self" handling.
(fhandler_process::fill_filebuf): Ditto. Add "fd" handling. Fix
"maps" output string.
* fhandler_registry.cc (fhandler_registry::fstat): Set correct link
count for directories.
* fhandler_socket.cc (fhandler_socket::get_proc_fd_name): New method.
* path.cc (symlink_info::set): Fix thinko.
* pinfo.cc (_pinfo::commune_recv): Rename pathbuf to path throughout.
Drop local path variable in PICOM_FIFO case. Fix debug output.
Close handles as early as possible. Add PICOM_FDS and PICOM_FD
handling.
(_pinfo::commune_send): Add PICOM_FDS and PICOM_FD handling.
(_pinfo::fd): New method.
(_pinfo::fds): New method.
* pinfo.h (enum picom): Add PICOM_FDS and PICOM_FD.
(_pinfo::fd): Declare.
(_pinfo::fds): Declare.
* pipe.cc (fhandler_pipe::get_proc_fd_name): New method.
throughout.
* pinfo.cc (set_myself): Pass INVALID_HANDLE_POINTER if h is NULL.
(pinfo::init): Make third parameter non-optional. Eliminate use of PID_EXECED
as an argument. Put setting of handle back inside loop but reorganize to try
to open it only when necessary.
* fork.cc (fork_parent): Copy parent's nice value into child.
* spawn.cc (spawn_guts): Ditto.
* miscfuncs.cc (winprio_to_nice): New function.
(nice_to_winprio): Ditto.
* pinfo.cc (pinfo_init): If parent is not a Cygwin process, set
default nice value according to current Win32 priority class.
* pinfo.h (class _pinfo): Add nice member.
* syscalls.cc (setpriority): New function, only implementing
PRIO_PROCESS for now.
(getpriority): Ditto.
(nice): Just call setpriority.
* wincap.h (wincaps::has_extended_priority_class): New element.
* wincap.cc: Implement above element throughout.
* winsup.h: Add prototypes for winprio_to_nice and nice_to_winprio.
* include/limits.h (NZERO): New define.
* include/cygwin/types.h (id_t): New datatype.
* include/cygwin/version.h: Bump API minor version.
* include/sys/resource.h: Add PRIO_XXX defines and prototypes for
getpriority and setpriority.
loop since trying multiple times to call CreateFileMapping doesn't make much
sense. Try to structure the loop a little better so that exiting with a break
does the right thing.
(pinfo::release): Release shared memory area if it exists and close handle if
it exists.
has exited before getting an error code.
(pinfo::exit): "cd" to innocuous location before exiting to make sure that
process does not keep the current working directory busy while it is in the
process of really exiting.
(CoUninitialize): Remove.
(CoCreateInstance): Remove.
(CoTaskMemFree): Add.
(SHGetDesktopFolder): Add.
* path.cc (shortcut_header): Remove.
(shortcut_initalized): Remove.
(GUID_shortcut): New static GUID.
(struct win_shortcut_hdr): New struct describing Windows shortcut
header structure.
(symlink_worker): Rewrite creating Windows shortcuts. Create
ITEMIDLIST if target exists. Only write once.
(cmp_shortcut_header): Use win_shortcut_hdr structure for comparison.
(check_shortcut): Rewrite to read only once from file. Allow skipping
an ITIMIDLIST in the file.
* pinfo.cc (pinfo::exit): Use renamed function.
(proc_waiter): Ditto. Make a copy of input argument to avoid problems when
procs array is shuffled. Flag when copy is made so that remove_proc knows when
it is safe to reshuffle.
* sigproc.cc (proc_terminate): Don't flag process_state as PID_EXITED.
(remove_proc): Wait for waiter to finish copying pinfo element before moving it
(an actual wait should be an extremely rare event).
* strace.cc (main): Recognize new option for displaying hex value of strace
type.
(handle_output_debug_string): Prepend output with hex value of strace message
if -H is specified.
* include/sys/cygwin.h: Remove PID_ZOMBIE.
* pinfo.h: Rename EXITCODE_* defines.
(pinfo::set_exit_state): Remove parameter.
* pinfo.cc (set_exit_state): Remove parameter. Reverse sense of test so that
exitcode is checked for having been set rather than not having been set. Set
flag when exitcode has been established. Don't set PID_STATE here.
(pinfo::init): Remove exitcode initialization.
(pinfo::exit): Reflect change in EXITCODE_* naming. Set flag when exitcode has
been established. Reflect change in arguments to set_process_state.
(proc_waiter): Reflect change in arguments to set_process_state. Set
process_state here and only here.
* fhandler_process.cc (fhandler_process::fill_filebuf): Reflect removal of
PID_ZOMBIE define.
(format_process_stat): Ditto.
(format_process_status): Ditto.
* sigproc.cc (pid_exists): Ditto.
(stopped_or_terminated): Ditto. Make sure that only low-order 16 bits of
exitcode are used.
* spawn.cc (spawn_guts): Reflect change in EXITCODE_* naming.
SETACL if no acls are available.
* fhandler.cc (fhandler_base::facl): Implement to return sensible
values on GETACL and GETACLCNT. Pretend successful SETACL.
* fhandler_virtual.cc (fhandler_virtual::facl): Ditto.
* fhandler_disk_file.cc (fhandler_disk_file::touch_ctime): New method
to set file's ctime.
(fhandler_disk_file::fchmod): Try opening file for writing first.
Set file's ctime on success.
(fhandler_disk_file::fchown): Ditto.
(fhandler_disk_file::facl): Ditto.
* fhandler.h (select_record::thread_errno): Save any encountered errno here.
(select_record::set_select_errno): New function.
(select_record::saw_error): New function.
(select_record::select_record): Initialize thread_errno to zero.
* select.cc (set_handle_or_return_if_not_open): Set thread_errno on failure.
(select_stuff::wait): Record errno for later resurrection in calling thread.
(peek_serial): Ditto.
* mkpasswd.c (print_win_error): Transform into macro.
(_print_win_error): Upgrade former print_win_error by
printing the line.
(current_user): Call _print_win_error.
(enum_users): Print name in case of lookup failure.
(enum_local_groups): Ditto.
(pinfo::exit): Move here from _pinfo::exit.
* sigproc.cc (child_info::sync): Use new function to set exitcode and
process_state.
* pinfo.cc (_pinfo::exit): Ditto.
(proc_waiter): Ditto.
(_pinfo::set_exit_state): Define new function.
(_pinfo::dup_proc_pipe): Close handle when there is no parent process around to
care about the exit value.
* dcrt0.cc (dll_crt0_0): Move subproc_ready synchronization later to make sure
that myself is still mapped in parent.
(do_exit): Reflect movement to pinfo::exit.
(__api_fatal): Ditto.
* exceptions.cc (signal_exit): Ditto.
* errno.cc (errmap): Map PROC_NOT_FOUND.
* init.cc (dll_entry): Release myself before exiting.
* sigproc.cc (proc_can_be_signalled): Set errno appropriately.
(sig_send): Ditto. Also remove ill-advised test for !myself->sendsig since
this is an indication of a process which is still initializating -- it is not
an error.
(child_info::sync): Don't set exitcode here. Assume that will happen in
proc_waiter, if necessary.
* spawn.cc (spawn_guts): Delay "wait_for_myself" logic until later. Don't wait
at all if the process has already exited. Reflect movement to pinfo::exit.
talk about a "version" when it's not a version.
(dll_crt0_0): Change info passed to multiple_cygwin_problem to be a little more
precise.
* shared.cc (user_shared_initialize): Ditto.
(shared_info::initialize): Ditto.
(cygthread::cygthread): Actually pass name as argument to debugging output to
avoid SEGV when strace'ing.
(cygthread::release): Don't set stack_ptr to NULL, since it is only set once on
first entry to a stub not on each stub iteration.
(cygthead::exit_thread): Remove obsolete function.
* cygthread.h (cygthread::exit_thread): Ditto.
(MSLEEP_MUTEX): New define for third parameter to msleep_event_name.
(MSLEEP_SEM): Ditto.
(MSLEEP_EVENT): Ditto.
(msleep_event_name): Add third parameter to allow multiple
synchronization objects per ident.
(_msleep): Implement new synchronization technique to make sure
that all threads have been woken up by a corresponding wakeup call.
(wakeup): Ditto.
(cygthread::cygthread): Ditto.
(cygthread::terminate_thread): Ditto. Move inuse test earlier or suffer
infinite loop.
* pinfo.cc (_pinfo::dup_proc_pipe): Close handle if DuplicateHandle fails and
process no longer exists.
* spawn.cc (spawn_guts): Create process in suspended state if OS demands it.
* wincap.cc: Add "start_proc_suspended" throughout.
* wincap.h (wincaps): Ditto.
(wincapc): Ditto.
* pinfo.cc (pinfo::init): Initialize exitcode to unset state rather than
SIGTERM.
(proc_waiter): Detect if exit code is unset and use status from
GetExitCodeProcess.
* sigproc.cc (child_info::sync): Remove exit code detection here since
proc_waiter now (again) detects it.
disk" device or fifo.
(fhandler_base::fchown): Ditto for changing ownership.
* fhandler_disk_file.cc (fhandler_base::fstat_helper): Accommodate device files
on ntfs partitions.
* path.cc (path_conv::check): Use isfs function to figure out if a path exists
on a filesystem to make sure that device files are caught.
(child_info::parent_wr_proc_pipe): Eliminate.
* pinfo.h (_pinfo::alert_parent): Move here from pinfo class.
(_pinfo::dup_proc_pipe): New method.
(_pinfo::sync_proc_pipe): Ditto.
* exceptions.cc (sig_handle_tty_stop): Reflect move of alert_parent.
* init.cc (dll_entry): Exit with status one if main process called ExitProcess.
* pinfo.cc (set_myself): Remove handling of parent_wr_proc_pipe.
(_pinfo::exit): Reflect move of alert_parent. Set procinfo to NULL to flag
that we are exiting normally. Always use exitcode when exiting
(although this could be a little racy).
(pinfo::init): Set default exit to SIGTERM. This will be the exit code
reported if process is terminated.
(_pinfo::dup_proc_pipe): New function.
(pinfo::wait): Duplicate wr_proc_pipe to the right place. Use dup_proc_pipe to
move the pipe to the child.
(_pinfo::sync_proc_pipe): New function.
(_pinfo::alert_parent): Move to _pinfo. Make sure that wr_proc_pipe is ours
before using it.
* sigproc.cc (child_info::child_info): Remove handling of parent_wr_proc_pipe.
* spawn.cc (spawn_guts): Pass our wr_proc_pipe to the child when execing.
Ensure that exit code of cygwin process started from windows is correctly set.
throughout.
* path.cc (path_conv::check): Declare, set and use "strip_tail".
(path_conv::set_normalized_path): Add and use second argument, replacing all
tail stripping tests.
itself here, to avoid a race.
(cygthread::release): Clear more stuff. Add a diagnostic for an internal
error.
* cygthread.h (auto_release): New function.
* pinfo.h (pinfo::remember): Add an argument to denote whether child is
detached.
* fork.cc (fork_parent): Reflect change in arguments to pinfo::remember.
* pinfo.cc (_pinfo::exit): Signal exit more forcibly.
(proc_waiter): Use cygthread::auto_release to signify that cygthread::stub
should release the thread. This should avoid a race.
(pinfo::alert_parent): Don't signify an error when wr_proc_pipe == NULL.
* sigproc.cc (proc_subproc): Add support for PROC_DETACHED_CHILD.
* sigproc.h: Ditto.
* spawn.cc (spawn_guts): Specify whether child is detached or not when calling
pinfo::remember.
MapViewOfFileEx.
* cygthread.cc (cygthread::stub): Previous change to make diagnostic output
more informative was really a bust. Try again. Capture previous name in a new
field in cygthread for diagnostic purposes.
(cygthread::cygthread): Ditto.
(cygthread::release): Add an argument to control whether h should be cleared or
not.
(cygthread::terminate_thread): Use 'inuse' for tests rather than 'h'.
(cygthread): Add some diagnostic fields.
(cygthread::release): Add an argument.
* pinfo.cc (proc_waiter): Accommodate change to cygthread::release.
* cygthread.cc (cygthread::release): Define here. Use InterlockedExchange to
set inuse or suffer potential races.
(cygthread::terminate): Use release().
* path.cc (path_conv::check): Check the output Win32 path for trailing spaces
and dots, not the input path. Disallow all use of foo./bar since consistently
getting this right is time consuming. Remove strange test for "unc\" since no
one seems to know what it's for.
processes" if pid == -1 -- not just if pid is negative.
(proc_can_be_signalled): Fix another long-standing problem. Set correct errno
when detecting an exited process.
* syscalls.cc: Include utmpx.h. Implement utmpx functions as stubs
to utmp functions.
(copy_ut_to_utx): New static function.
(pututline): Change from void to struct utmp * as on Linux.
(setutxent): New function.
(endutxent): New function.
(getutxent): New function.
(getutxid): New function.
(getutxline): New function.
(pututxline): New function.
* include/utmpx.h: New file.
* include/cygwin/utmp.h: New file.
* include/cygwin/version.h: Bump API minor number.
* include/sys/utmp.h: Include cygwin/utmp.h. Move stuff common with
utmpx functionality there.
(pututline): Declare struct utmp *.
hProcess handle here since it is used to ensure that a new process isn't
created with the old pid after the old pid exits.
* spawn.cc (spawn_guts): Ditto.
* pinfo.cc (proc_waiter): Don't send any signals if we've execed since this
process doesn't officially exist.
* pinfo.h (pinfo::pid_handle): Eliminate. Just use hProc.
* sigproc.cc (sig_send): Don't send any signals if our sendsig doesn't exist.
That's a sign that we are execing.
(remove_proc): Eliminate pid_handle close.
* pinfo.h (pinfo::wait_thread): New element.
* pinfo.cc (pinfo::wait): Store "handle" to started thread in pinfo.
* sigproc.cc (proc_terminate): Kill any threads waiting for a process pipe.
(proc_subproc): Don't mess with pinfo if it's myself.
* child_info.h (child_info_types): Label enum for _PROC constants.
(child_info::child_info): New constructor.
(child_info::~child_info): New destructor.
(child_info::sync): Declare new function.
(child_info_fork::child_info_fork): New constructor.
(child_info_spawn::child_info_spawn): Remove old constructor.
(child_info_spawn::child_info_spawn): New constructor.
* dcrt0.cc (dll_crt0_0): Use correct sizeof when doing sanity check on passed
in child_info. Signal readiness to parent when not forking (and not spawning).
* fork.cc (sync_with_child): Delete.
(resume_child): Remove extra argument.
(sync_with_parent): Use child_info method to sync with parent.
(fork_child): Don't close fork_info->subproc_ready since that is now handled by
the destructor.
(fork_parent): Remove subproc_ready stuff. Use child_info sync method for
waiting.. Set start time here for child. Rename "forked" to "child".
(fork): Check ch.subproc_ready for validity here.
* pinfo.h (_pinfo::exec_sendsig): Temp storage for exec stub which may be
staying around to handle non-cygwin captive process.
(_pinfo::exec_dwProcessId): Ditto.
(_pinfo::_lock): Renamed from lock.
(_pinfo::lock): New method.
(_pinfo::unlock): Ditto.
(_pinfo::initialize_lock): Ditto.
* pinfo.cc (set_myself): Use initialize_lock method to initialize myself lock.
Set "exec" fields in _pinfo to zero to indicate that we've started
successfully. Set start time here when appropriate.
(_pinfo::commune_send): Use pinfo lock/unlock methods.
(proc_waiter): Remove special case for non-cywin processes. Reinstitute
handling for PID_NOCLDSTOP.
* sigproc.cc (proc_subproc): Set proper EAGAIN errno when process table is
filled.
(sig_send): Use exec_* fields from _pinfo for sending signals if the the _pinfo
sendsig never materializes.
(child_info::child_info): New constructor, renamed from init_child_info.
Zeroes child_info structure and sets appropriate fields in structure based on
chtype.
(child_info::~child_info): New destructor. Closes subproc_ready if it exists.
(child_info_fork::child_info_fork): New constructor.
(child_info_spawn::child_info_spawn): New constructor.
(child_info::ready): New function. Signals parent when child is ready.
(child_info::sync): New function. Wait for child to signal us or process to
die.
(remove_proc): Remove closing of hProcess since this should now be handled
shortly after process creation.
* spawn.cc (spawn_guts): Use child_info_spawn constructor rather than
init_child_info. Save exec_sendsig and exec_dwProcessId in execing _pinfo.
Rely on child_info constructor to properly set parent_wr_proc_pipe in ciresrv.
Revert to previous determination on whether to start a process in suspended
mode. Remove reparenting stuff. Just keep a stub around if starting a
non-cygwin process.
* cygserver.sgml: Cleanup minor markup problem.
* how-resources.texinfo: Add man and info to documentation FAQ
* how-using.texinfo: Add more detail to Unicode FAQ.
* install.texinfo: Finally apply Pierre's patch from 2003-03-03.
* relnotes.texinfo: Add note about hyperthreading reports.
* fork.cc (fork_parent): Set parent_wr_proc.
* pinfo.cc (set_myself): Close child_proc_info->parent_wr_proc if it exists
rather than trying to get value from parent _pinfo.
* pinfo.h (enum parent_aleter): New enum.
(pinfo::alert_parent): Declare as returning a value.
(pinfo::parent_alive): New function.
* pinfo.cc (pinfo::alert_parent): Set wr_proc_pipe to invalid non-NULL value
when parent disappears. Return success of operation.
(proc_waiter): Use __ALERT_* enum for control since these are not really
signals. Implement __ALERT_ALIVE.
* sigproc.cc (my_parent_is_alive): Eliminate.
* sigproc.h (my_parent_is_alive): Ditto for declaration.
(__SIGREPARENT): Eliminate.
* dcrt0.cc (dll_crt0_0): Remove hexec_proc stuff.
* fork.cc (fork_child): Remove call to pinfo_fixup_after_fork.
* pinfo.cc (set_myself): Close and zero pid_handle if set.
(pinfo_fixup_after_fork): Delete.
(proc_waiter): Don't close vchild.hProcess here. Do that when we are remove
the vchild from procs. Save hProcess as pid_handle only on first reparent
operation.
(pinfo::wait): Don't set pid_handle here.
(pinfo::alert_parent): Always try to send signal. If unsuccessful then close
and zero wr_proc_pipe.
* pinfo.h (pinfo::pinfo): Make sure that appropriate parts of the class are
zeroed on construction.
(pinfo::alert_parent): Take char argument.
(pinfo_fixup_after_fork): Delete declaration.
(hexec_proc): Ditto.
* sigproc.cc (remove_proc): Close pid_handle and hProcess if appropriate.
* spawn.cc (spawn_guts): Set cygheap->pid_handle on first exec.
* cygheap.h (init_cygheap::pid_handle): New element.
* pinfo.cc (set_myself): Clear previously existing cygheap->pid_handle when a
new process has been started.
(pinfo::wait): Make sure that a handle to the newly forked/spawned process is
kept around so that the pid will not be reused.
* pinfo.h (_pinfo::pid_handle): Move.
(pinfo::pid_handle): to here.
* spawn.cc (spawn_guts): Create a pid_handle in cygheap prior to spawning to
ensure that the pid does not get reused during the lifetime of the "cygwin
pid".
* pinfo.h (pinfo::alert_parent): New function.
* exceptions.cc (sig_handle_tty_stop): Use alert_parent to send "signals" to
parent.
* fork.cc (fork_parent): Don't close pi.hProcess. Let the waiter thread do
that.
* pinfo.cc (proc_waiter): Detect case where process exits without setting the
exit code and use value from GetExitCodeProcess. Reluctantly implement
__SIGREPARENT.
(pinfo::alert_parent): Define.
* sigproc.h (__SIGREPARENT): New enum.
* spawn.cc (spawn_guts): Send reparent signal to parent on exec. Always create
process in suspended state to avoid races. Remove cygthread.h in favor of
cygtls.h throughout since cygtls now includes cygthread.h. Eliminate
ppid_handle usage throughout.
* child_info.h: Regenerate magic number
(child_info): Remove pppid_handle.
* cygthread.h (cygthread::release): New method. Frees thread without waiting.
* cygthread.cc (cygthread::stub): Set _ctinfo in _mytls to point to information
for executing thread. Don't call SetEvent if thread is no longer in use.
(cygthread::simplestub): Ditto.
* cygtls.h (_cygtls::_ctinfo): New element contains pointer to information
about executing cygthread, if any.
* dcrt0.cc: Remove last vestiges of per_thread stuff.
(dll_crt0_0): Ditto. Remove accommodation for ppid_handle.
(do_exit): Remove obsolete reparenting test.
(_exit): Exit with a more SUSv3-like exit value.
* dtable.cc (dtable::stdio_init): Check for myself->cygstarted rather than
myself->ppid_handle to see if we were started by a cygwin process.
* exceptions.cc (open_stackdumpfile): Ditto.
(handle_exceptions): Ditto.
(ctrl_c_handler): Ditto.
(sig_handle_tty_stop): Ditto. Let parent send signal to itself on STOP.
(sigpacket::process): Comment out vfork test.
(signal_exit): Use more SUSv3-like exit value on signal.
* external.cc (fillout_pinfo): Don't set hProcess.
* fork.cc: Remove VFORK cruft.
(per_thread::set): Delete.
(fork_child): Remove perthread stuff.
(fork_parent): Remove obsolete subproc_init. Accommodate new method for
tracking subprocesses.
* pinfo.cc (set_myself): Accommodate new pinfo/_pinfo layout. Set some things
here that used to be set in wait_sig.
(_pinfo::exit): Set exitcode here. Close process pipe.
(_pinfo::commune_send): Accommodeate new pinfo/_pinfo layout.
(proc_waiter): New function. Waits, in a thread for subprocess to go away.
(pinfo::wait): New function. Initialization for proc_waiter.
* pinfo.h (_pinfo::exitcode): New element.
(_pinfo::cygstarted): Ditto.
(_pinfo::wr_proc_pipe): Ditto.
(_pinfo::ppid_handle): Delete.
(_pinfo::hProcess): Delete.
(_pinfo::lock): Delete.
(pinfo::hProcess): New element.
(pinfo::lock): Ditto.
(pinfo::wait): Declare new function.
(pinfo::preserve): Define new function.
* sigproc.cc: Remove old stuff from wait_subproc thread based method.
(zombies): Remove.
(procs): New.
(my_parent_is_alive): Just check that the parent pid exists.
(mychild): Just use pinfo methods to determine if child is mine.
(proc_subproc): Revamp PROC_ADDCHILD to use pinfo::wait. Remove
PROC_CHILDTERMINATED logic. Use different method to remove processes from list
when SIGCHLD == SIG_IGN.
(proc_terminate): Gut.
(subproc_init): Delete.
(init_child_info): Remove setting of pppid_handle.
(checkstate): Revamp to only scan procs array.
(remove_proc): Rename from remove_zombie. Don't close hProcess or pid_handle.
Don't release memory if it's myself.
(stopped_or_terminated): Change logic to handle new consolidated proc/zombie
array.
(wait_subproc): Delete.
* sigproc.h: Remove obsolete EXIT_* defines.
(subproc_init): Remove declaration.
* spawn.cc (spawn_guts): Remove reparenting stuff. Use standard wait logic to
wait for child if started from a non-cygwin process.
* tlsoffsets.h: Regenerate.
* tty.cc (tty_init): Check for myself->cygstarted rather than
myself->ppid_handle to see if we were started by a cygwin process.
* include/sys/signal.h (external_pinfo::exitcode): Replace hProcess.
* include/sys/wait.h (WCOREDUMP): Define.
* fhandler_tty.cc (fhandler_tty_slave::read): Add debugging output for timeout
case.
* signal.cc (abort): Flag that we are exiting with the ABORT signal.
* cygheap.h (cygheap_user::get_windows_id): New method.
* registry.h (get_registry_hive_path): Change argument type.
(load_registry_hive): Ditto.
* registry.cc (get_registry_hive_path): Change argument type and take
Win9x keys into account.
(load_registry_hive): Ditto.
* uinfo.cc (cygheap_user::env_userprofile): Use get_windows_id, even
for SYSTEM.
* shared.cc (user_shared_initialize): Use get_windows_id.
* syscalls.cc (seteuid32): Load the registry hive and reload the user
shared also on Win9x.
Joshua Daniel Franklin
Christopher Faylor
Corinna Vinschen
Danny Smith
Pierre Humblet
Chris Sutcliffe
Earnie Boyd
Bas van Gompel