2011-07-24 Maciej W. Rozycki <macro@codesourcery.com>
* mips.h (INSN_TRAP): Rename to...
(INSN_NO_DELAY_SLOT): ... this.
(INSN_SYNC): Remove macro.
gas/
2011-07-24 Maciej W. Rozycki <macro@codesourcery.com>
* config/tc-mips.c (can_swap_branch_p): Adjust for the rename of
INSN_TRAP to INSN_NO_DELAY_SLOT. Remove the check for INSN_SYNC
as well as explicit checks for ERET and DERET when scheduling
branch delay slots.
opcodes/
2011-07-24 Maciej W. Rozycki <macro@codesourcery.com>
* mips-opc.c (NODS): New macro.
(TRAP): Adjust for the rename of INSN_TRAP to INSN_NO_DELAY_SLOT.
(DSP_VOLA): Likewise.
(mips_builtin_opcodes): Add NODS annotation to "deret" and
"eret". Replace INSN_SYNC with NODS throughout. Use NODS in
place of TRAP for "wait", "waiti" and "yield".
* mips16-opc.c (NODS): New macro.
(TRAP): Adjust for the rename of INSN_TRAP to INSN_NO_DELAY_SLOT.
(mips16_opcodes): Use NODS in place of TRAP for "jalrc", "jrc",
"restore" and "save".
After testing the hardware with all the different dsp flags, the MM flag
triggers sign extension in all modes. So drop the limited use of it, and
the local custom helper that was also extending unsigned values. We also
can see that the flag checks in the mult/mac insns have the same behavior
with sign extending, so add a helper func to keep the logic the same in
both places.
Signed-off-by: Robin Getz <robin.getz@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-03-22 Eric B. Weddington <eric.weddington@atmel.com>
* archures.c: Add AVR XMEGA architecture information.
* cpu-avr.c (arch_info_struct): Likewise.
* elf32-avr.c (bfd_elf_avr_final_write_processing): Likewise.
(elf32_avr_object_p): Likewise.
/gas:
2011-03-22 Eric B. Weddington <eric.weddington@atmel.com>
* config/tc-avr.c (struct avr_opcodes_s): Add opcode field.
(AVR_INSN): Change definition to match.
(avr_opcodes): Likewise, change to match.
(mcu_types): Add XMEGA architecture names and new XMEGA device names.
(md_show_usage): Add XMEGA architecture names.
(avr_operand): Add 'E' constraint for DES instruction of XMEGA devices.
Add support for SPM Z+ instruction.
* doc/c-avr.texi: Add documentation for XMEGA architectures and
devices.
/include/opcode:
2011-03-22 Eric B. Weddington <eric.weddington@atmel.com>
* avr.h (AVR_ISA_SPMX,AVR_ISA_DES,AVR_ISA_M256,AVR_ISA_XMEGA):
New instruction set flags.
(AVR_INSN): Add new instructions for SPM Z+, DES for XMEGA.
/ld:
2011-03-22 Eric B. Weddington <eric.weddington@atmel.com>
* Makefile.am (ALL_EMULATION_SOURCES): Add AVR XMEGA architectures.
(eavrxmega?.c): Likewise.
* configure.tgt (targ_extra_emuls): Likewise.
* emulparams/avrxmega1.sh: New file.
* emulparams/avrxmega2.sh: Likewise.
* emulparams/avrxmega3.sh: Likewise.
* emulparams/avrxmega4.sh: Likewise.
* emulparams/avrxmega5.sh: Likewise.
* emulparams/avrxmega6.sh: Likewise.
* emulparams/avrxmega7.sh: Likewise.
* emultempl/avrelf.em (avr_elf_${EMULATION_NAME}_before_allocation):
Add avrxmega6, avrxmega7 to list of architectures for no stubs.
/opcodes:
2011-03-22 Eric B. Weddington <eric.weddington@atmel.com>
* avr-dis.c (avr_operand): Add opcode_str parameter. Check for
post-increment to support LPM Z+ instruction. Add support for 'E'
constraint for DES instruction.
(print_insn_avr): Adjust calls to avr_operand. Rename variable.
The mmod field is decoded in a few places (gas/opcodes/sim), so move it to
a common place to avoid duplication.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
* config/tc-hppa.c (pa_ip): Revert last change. Add variable need_cond
to determine whether a 64-bit condition is needed for 'A' and 'S'
conditions. Default to 32-bit never condition for logical and unit
instructions. Add error message for missing branch on bit condition.
* hppa.h (pa_opcodes): Revert last change. Exchange 32 and 64-bit
"bb" entries.
* hppa-dis.c (compare_cond_64_names): Change never condition to ",*".
(add_cond_64_names): Likewise.
(logical_cond_64_names): Likewise.
(unit_cond_64_names): Likewise.
* config/tc-hppa.c (pa_ip): Set doubleword carry/borrow bit when a
doubleword completer or doubleword condition is found in an add/sub
instruction. Reject match for 'A'/'S' only if there is no condition
and d bit is not set.
* gas/hppa/basic/add2.s: Add test for a simple doubleword carry
instruction.
* gas/hppa/basic/sub2.s: Add tests for simple word and doubleword
borrow instructions.
* gas/hppa/basic/basic.exp: Update regexps for above.
* opcode/hppa.h: Clear "d" bit in "add" and "sub" patterns.
* config/tc-s390.c (current_cpu): Initialize with latest CPU.
(init_default_arch): Default to z/Architecture mode if CPU provides it.
Remove the check setting the CPU default.
2010-11-25 Andreas Krebbel <Andreas.Krebbel@de.ibm.com>
* opcode/s390.h (enum s390_opcode_cpu_val): Add S390_OPCODE_MAXCPU.
* gas/config/tc-arm.c (arm_arch_v6m_only): New variable.
(aeabi_set_public_attributes): Ensure we only set the Operating System
Extension when we are on an M-profile core.
* gas/testsuite/gas/arm/pr12198-1.d: New test.
* gas/testsuite/gas/arm/pr12918-1.s: Likewise.
* gas/testsuite/gas/arm/pr12198-2.d: Likewise.
* gas/testsuite/gas/arm/pr12918-2.s: Likewise.
* include/opcode/arm.h (ARM_AEXT_V6M_ONLY): New define.
(ARM_AEXT_V6M): Rewrite in terms of ARM_AEXT_V6M_ONLY.
(ARM_ARCH_V6M_ONLY): New define.
* gas/config/tc-arm.c (arm_ext_virt): New variable.
(arm_reg_type): Add REG_TYPE_RNB for banked registers.
(reg_entry): Allow registers to be larger than a byte.
(reg_alias): Fix type warning.
(parse_operands): Parse banked registers when appropriate.
(do_mrs): Add support for Virtualization Extensions.
(do_hvc): New function.
(do_t_mrs): Add support for Virtualization Extensions.
(do_t_msr): Likewise.
(do_t_hvc): New function.
(SPLRBANK): New define.
(reg_names): Add banked registers.
(insns): Add support for Virtualization Extensions.
(md_apply_fixup): Likewise.
(arm_cpus): -mcpu=cortex-a15 implies the Virtualization Extensions.
(arm_extensions): Add 'virt' extension.
(aeabi_set_public_attributes): Add support for Virtualization
Extensions.
* gas/doc/c-arm.texi: Document 'virt' extension.
* gas/testsuite/gas/arm/armv7-a+virt.d: New test.
* gas/testsuite/gas/arm/armv7-a+virt.s: Likewise.
* gas/testsuite/gas/arm/attr-march-all.d: Update for Virtualization Extensions.
* gas/testsuite/gas/arm/attr-march-armv7-a+sec+virt.d: New test.
* gas/testsuite/gas/arm/attr-march-armv7-a+virt.d: Likewise.
* include/opcode/arm.h (ARM_EXT_VIRT): New define.
(ARM_ARCH_V7A_IDIV_MP_SEC): Rename...
(ARM_ARCH_V7A_IDIV_MP_SEC_VIRT): ...to this and include Virtualization
Extensions.
* opcodes/arm-dis.c (arm_opcodes): Add Virtualiztion Extensions support.
(thumb32_opcodes): Likewise.
(banked_regname): New function.
(print_insn_arm): Add Virtualization Extensions support.
(print_insn_thumb32): Likewise.
(do_div): New function.
(insns): Accept UDIV and SDIV in ARM state.
(arm_cpus): The cortex-a15 option has all current v7-A extensions.
(arm_extensions): Add 'idiv' extension.
(aeabi_set_public_attributes): Update Tag_DIV_use values for the
Integer Divide extension.
* gas/doc/c-arm.texi: Document the idiv extension.
* gas/testsuite/gas/arm/armv7-a+idiv.d: New test.
* gas/testsuite/gas/arm/armv7-a+idiv.s: Likewise.
* gas/testsuite/gas/arm/attr-march-all.d: Update for Integer divide extension.
* gas/testsuite/gas/arm/attr-march-armv7-a+idiv.d: New test.
* include/opcode/arm.h (ARM_AEXT_ADIV): New define.
(ARM_ARCH_V7A_IDIV_MP_SEC): Likewise.
* opcodes/arm-dis.c (arm_opcodes): Support disassembly of UDIV and SDIV in
ARM state.
(arm_ext_m): Add support for OS extension.
(arm_ext_os): New variable.
(do_t_swi): In v6-M ensure we have the OS extension.
(arm_cpus): The cortex-m1 and cortex-m0 options have the OS
extension by default.
(arm_archs): Add armv6s-m.
(arm_extensions): Add 'os' extension.
(cpu_arch_ver): Add support for v6S-M.
* gas/doc/c-arm.texi: Document the OS Extension, and v6-m and v6s-m
architecture options.
* gas/testsuite/gas/arm/archv6s-m-bad.d: New test.
* gas/testsuite/gas/arm/archv6s-m-bad.l: Likewise.
* gas/testsuite/gas/arm/archv6s-m.d: Likewise.
* gas/testsuite/gas/arm/archv6s-m.s: Likewise.
* gas/testsuite/gas/arm/attr-march-armv6-m+os.d: Likewise.
* gas/testsuite/gas/arm/attr-march-armv6s-m.d: Likewise.
* include/opcode/arm.h (ARM_EXT_OS): New define.
(ARM_AEXT_V6SM): Likewise.
(ARM_ARCH_V6SM): Likewise.
The disassembler has partial (but incomplete/broken) support already for
the pseudo debug insn OUTC, so let's fix it up and finish it. And now
that the disassembler can handle it, make sure our assembler can output
it too.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
* rx.h (RX_Operand_Type): Add TwoReg.
(RX_Opcode_ID): Remove ediv and ediv2.
[opcodes]
* rx-decode.opc (SRR): New.
(rx_decode_opcode): Use it for movbi and movbir. Decode NOP2 (mov
r0,r0) and NOP3 (max r0,r0) special cases.
* rx-decode.c: Regenerate.
[sim/rx]
* rx.c (decode_cache_base): New.
(id_names): Remove ediv and edivu.
(optype_names): Add TwoReg.
(maybe_get_mem_page): New.
(rx_get_byte): Call it.
(get_op): Add TwoReg support.
(put_op): Likewise.
(PD, PS, PS2, GD, GS, GS2, DSZ, SSZ, S2SZ, US1, US2, OM): "opcode"
is a pointer now.
(DO_RETURN): New. We use longjmp to return an exception result.
(decode_opcode): Make opcode a pointer to the decode cache. Save
decoded opcode information and re-use. Call DO_RETURN instead of
return throughout. Remove ediv and edivu.
* mem.c (ptdc): New. Adds decode cache.
(rx_mem_ptr): Support it.
(rx_mem_decode_cache): New.
* mem.h (enum mem_ptr_action): add MPA_DECODE_CACHE.
(rx_mem_decode_cache): Declare.
* gdb-if.c (sim_resume): Add decode_opcode's setjmp logic here...
* main.c (main): ...and here. Use a fast loop if neither trace
nor disassemble is given.
* cpu.h (RX_MAKE_STEPPED, RX_MAKE_HIT_BREAK, RX_MAKE_EXITED,
RX_MAKE_STOPPED, RX_EXITED, RX_STOPPED): Adjust so that 0 is not a
valid code for anything.
* config/tc-ppc.c (md_assemble): Emit APUinfo section for
PPC_OPCODE_E500.
gas/testsuite/
* gas/ppc/e500.s: Add eieio, mbar and lwsync
* gas/ppc/e500.d: Likewise.
include/opcode/
* ppc.h (PPC_OPCODE_E500): Define.
opcodes/
* ppc-dis.c (ppc_opts): Remove PPC_OPCODE_E500MC from e500 and
e500x2. Add PPC_OPCODE_E500 to e500 and e500x2
* ppc-opc.c (powerpc_opcodes): Deprecate all opcodes on EFS which
touch floating point regs and are enabled by COM, PPC or PPCCOM.
Treat sync as msync on e500. Treat eieio as mbar 1 on e500.
Treat lwsync as msync on e500.
Maciej W. Rozycki
Richard Sandiford
Eric Weddington
Nick Clifton
Michael Frysinger
Paul Brook
Andreas Krebbel
Bernd Schmidt
John David Anglin
Matthew Gretton-Dann
Alan Modra
DJ Delorie
Catherine Moore
Joseph Myers