(Continuing slow-motion replay)
* configure.in (v810*): Remove special setting of tools.
* configure: Add support for extra required flags for ar or nm.
* configure.in (aix4.3+): Use above support for target-specific
issues, rather than using config/mt-aix43.
(Starting slow-motion replay merge from gcc 3.4 b-i-b branch)
* configure: Remove 'removing', which doesn't work. Replace $subdir
with . everywhere. Replace $subdirs with ''. Replace $makesrcdir
with $srcdir. Reformat indentation. Substitute some variables
formerly hard-coded in the Makefile for build=host.
* Makefile.tpl: Autogenerate more; make more autoconf-friendly.
* Makefile.def: Autogenerate more.
* Makefile.in: Regenerate.
(winpids::init): New declaration.
(winpids::cs): Ditto.
(winpids::winpids): Use set rather than init.
* external.cc (fillout_pinfo): Ditto.
* dcrt0.cc (dll_crt0_1): Call winpids::init.
* pinfo.cc (winpids::set): Renamed from init. Wrap calls in critical section.
(winpids::init): New function.
(winpids::cs): Define.
* sec_acl.cc: Fix some formatting. Only set and check `other' bits in
a_perm throughout. Use ILLEGAL_GID id for all entries having no id.
(setacl): Fix inheritance condition.
(getacl): Set all permission bits in CLASS_OBJ and DEF_CLASS_OBJ
entries. Remove DENY bits before returning to calling function.
(acltomode): Fix usage of searchace(). If available, use CLASS_OBJ
to mask GROUP_OBJ permissions.
(aclfrommode): Fix usage of searchace(). If available, set CLASS_OBJ
permissions to same value as GROUP_OBJ permissions.
2002-11-24 Pierre Humblet <pierre.humblet@ieee.org>
* sec_acl.cc (getace): Fix the behavior when allow and
deny entries are present in arbitrary order.
(getacl): Report the actual number of entries when
aclbufp is NULL, even if nentries is zero. Fix the mask
reporting, handle the case where the owner and group sids
are equal and streamline the code.
(acl_worker): Take allow_ntsec into account.
* dcrt0.cc (dll_crt0_1): Add call to pthread::initMainThread to
initialize mainthread when it is safe to call new.
* init.cc (dll_entry): Change call to store reents in tls key.
* thread.cc (_reent_clib) : Change call to get reents from tls
key.
(_reent_winsup): Ditto.
(MTinterface::Init): Key handling changed. Remove initialization
of member variables.
(MTinterface::fixup_after_fork): Reinitialize mainthread object
after fork. Reset threadount to 1.
(pthread::initMainThread): Create mainthread object dynamically.
and initialize with valid handles.
(pthread::self): Remove calls to create thread objects.
(pthread::setTlsSelfPointer): Change call to store thread self
handle in tls key.
(pthread::getTlsSelfPointer): New static method.
(pthread::exit): Remove setTlsSelfPointer call.
(pthread::initCurrentThread): New method.
(pthread::thread_init_wrapper): Change call to store thread self
handle in tls key.
(pthread::join): Check for a valid joiner.
(pthreadNull::pthreadNull): Mark Null object as detached.
(pthreadNull::exit): Terminate thread via ExitThread.
* thread.h (pthread::initMainThread): Change parameter in function
call.
(pthread::getTlsSelfPointer): New static method.
(pthread::initCurrentThread): New method.
(MTinterface::reent_key): Remove.
(MTinterface::thread_self_dwTlsIndex): Ditto..
(MTinterface::indexallocated): Ditto.
(MTinterface::mainthread): Ditto.
(MTinterface::reent_key): New member.
(MTinterface::thread_self_key): Ditto.
(MTinterface::MTinterface): Initialize all members.
* readme: Document running portions of the test suite (Thanks Egor!).
* winsup.api/pthread/mainthreadexits.c: New file, derived from
Thomas Pfaff's test cases.
* winsup.api/pthread/threadidafterfork.c: Ditto.
waiting for signals to happen.
* signal.cc (sleep): Force pending signal delivery before sleeping.
(usleep): Ditto.
(signal): Force pending signal delivery before manipulating signal stuff.
(sigprocmask): Ditto.
(kill_worker): Ditto.
(abort): Ditto.
(sigaction): Ditto.
* syscalls.cc (readv): Force pending signal delivery before I/O.
(writev): Ditto.
(open): Ditto.
* net.cc: Ditto, throughout.
* sigproc.cc (sig_dispatch_pending): Deliver any pending signals prior to
returning.
* tty.cc (tty::make_pipes): Increase pipe buffer size.
* configure.in: Change check for libc/include in ${CC} to
use an intermediate value so as to work with different shells.
* configure: Regenerated.
* Makefile.in: Ditto.
timeslice' wait.
(setup_handler): Revamp YA to attempt to deliver signal multiple times on
failure rather than punting to wait_sig.
* miscfuncs.cc (low_priority_sleep): Accept INFINITE sleep to mean "don't reset
the priority after setting it to idle". Return previous priority.
* winsup.h (SLEEP_0_STAY_LOW): Define.
(low_priority_sleep): Return an int.
* sigproc.h: Define WAIT_SIG_PRIORITY here.
* sigproc.cc: Remove WAIT_SIG_PRIORITY definition.
* libc/machine/h8300/setjmp.S (setjmp, longjmp): Combine common
code for __H8300H__ and __H8300S__. Also return 32-bit return code
when -mint32 is used.
Undeclare internal_getpwent. Define DEFAULT_UID_NT. Change
DEFAULT_GID.
* passwd.cc (internal_getpwsid): New function.
(internal_getpwent): Suppress.
(read_etc_passwd): Make static. Rewrite the code for the completion
line. Set curr_lines to 0.
(parse_pwd): Change type to static int. Return 0 for short lines.
(add_pwd_line): Pay attention to the value of parse_pwd.
(search_for): Do not look for nor return the DEFAULT_UID.
* grp.cc (read_etc_group): Make static. Free gr_mem and set
curr_lines to 0. Always call add_pwd_line. Rewrite the code for the
completion line.
(internal_getgrsid): New function.
(parse_grp): If grp.gr_mem is empty, set it to &null_ptr.
Never NULL gr_passwd.
(getgrgid32): Only return the default if ntsec is off and the gid is
ILLEGAL_GID.
* sec_helper.cc (cygsid::get_id): Use getpwsid and getgrsid.
(cygsid_getfrompw): Clean up last line.
(cygsid_getfromgr): Ditto.
(is_grp_member): Use getpwuid32 and getgrgid32.
* uinfo.cc (internal_getlogin): Set DEFAULT_GID at start.
Use getpwsid. Move the read of /etc/group after the second access
to /etc/passwd. Change some debug_printf.
just in case an access_denied ACE follows an access_allowed.
Handle the case owner_sid == group_sid, with a FIXME.
Remove unnecessary tests for non-NULL PSIDs.
(alloc_sd): Use existing owner and group sids if {ug}id == -1.
Handle case where owner_sid == group_sid.
Do not call is_grp_member. Try to preserve canonical ACE order.
Remove unnecessary tests for non-NULL PSIDs. Reorganize
debug_printf's.
(get_initgroups_sidlist): Put well_known_system_sid on left
side of ==.
(add_access_denied_ace): Only call GetAce if inherit != 0.
(add_access_allowed_ace): Ditto. Use appropriate sizeof.
* syscalls.cc (chown_worker): Pass {ug}id equal to -1 to
alloc_sd, which removes the need to obtain old_{ug}id.
(chmod): Remove call to get_file_attribute (), simply pass
{ug}id equal to -1 to alloc_sd.
* h8300.h (h8_opcode): Remove 'noperands', 'idx', and 'size'
fields.
(h8_opcodes). Modify initializer and initializer macros to no
longer initialize the removed fields.
* h8300.h (h8_opcode): Remove 'length' field.
(h8_opcodes): Mark as 'const' (both the declaration and
definition). Modify initializer and initializer macros to no
longer initialize the length field.
2002-11-11 Klee Dienes <kdienes@apple.com>
* h8300-dis.c: Include libiberty.h (for xmalloc).
(struct h8_instruction): New type, used to wrap h8_opcodes with a
length field (computed at run-time).
(h8_instructions): New variable.
(bfd_h8_disassemble_init): Allocate the storage for
h8_instructions. Fill h8_instructions with pointers to the
appropriate opcode and the correct value for the length field.
(bfd_h8_disassemble): Iterate through h8_instructions instead of
h8_opcodes.
* arc.h (arc_ext_opcodes): Declare as extern.
(arc_ext_operands): Declare as extern.
* i860.h (i860_opcodes): Declare as const.
2002-11-18 Klee Dienes <kdienes@apple.com>
* arc-opc.c (arc_ext_opcodes): Define.
(arc_ext_operands): Define.
* i386-dis.c (Suffix3DNow): Declare as const.
* arm-opc.h (arm_opcodes): Declare as const.
(thumb_opcodes): Declare as const.
* h8500-opc.h (h8500_table): Declare as const.
(h8500_table): Use a NULL for the opcode in the terminator, so
that code testing (opcode->name) behaves correctly.
* mcore-opc.h (mcore_table): Declare as const.
* sh-opc.h (sh_table): Declare as const.
* w65-opc.h (optable): Declare as const.
* z8k-opc.h (z8k_table): Declare as const.
