prompt display routines; make Emacs and Vi share
code, permitting reducing of duplication and code
removal as well as more consistent behaviour; put
some common code into shared helper functions, too
• New x_adjust() logic (Emacs mode): when determining
what portion of a line to render use a much more
sophisticated algorithm and try to fill up ⅔ of the
total screen width (with line and prompt both) also
as wished from Steffen Daode Nurpmeso
Whenever the SIGEXIT trap was set (to anything, really)
syntax errors and interruptions were not ignored any more
in an interactive shell (where they should be, unless
set -e is used); fix that.
tbd: traps should probably only be marked as pending
and run for LLEAVE/E_NONE
• sig_t detection was a bit insane, it is a function-pointer type after all
• fix uninitialised variable in c_select which led to mistakenly accepting
invalid (nōn-numeric) input and acting, randomly, upon it
• keep SIGCHLD blocked in child after forking longer, for job list manip
• block SIGCHLD ifdef DEBUG_LEAKS to not run job foo during/after afreeall
• fix annoying ISO C90 vs. C99 (un)signed constant warning
• correct order of built-in commands; use POSIX special versus “all others”
plus “keeps assignments” as distinction, no longer play POSIX regular vs.
others game; sync manpage
• fix LP#1156707: map (( internally to “let]” which is no valid function
name and so can’t be overridden but is unlikely to be used otherwhere
and not strictly permitted (by POSIX) anyway
• we do not need -Wno-overflow any more, either
• bump to R45
is larger than the positive range of the latter (implementation-defined), so
avoid them in all explicit cases and rearrange stuff and check for it
(I’m gonna have to revise lots more code…)
that get used, plus one for the realpath-1 regression test; also make
sys_siglist_decl detection nicer and poison strerror() with non-const
return value ifdef DEBUG, make it always const
• tty_fd is now never closed
• new tty_hasstate tracks tty_state (cf. thread around
http://article.gmane.org/gmane.os.miros.mksh/79 and PLD bug)
• as users requested, importing COLUMNS or LINES from the environment
now removes its special-ness as does unsetting it
• otherwise, setting COLUMNS or LINES is honoured until the next SIGWINCH
arrives or change_winsz is otherwise run (e.g. before displaying the
prompt in the interactive command line editing modes)
• SIGWINCH is now honoured before each reading of $COLUMNS and $LINES too
• change the Uhr to match – it no longer calls stty(1) ☺
• all writers of exstat ensure the value is in [0; 0xFF]
• all readers of exstat AND it with 0xFF (not strictly needed thus)
• trap_exstat is “safe”, i.e. always either -1 or [0; 0xFF]
several conditions are met as outlined below; for more background, refer to
http://www.FreeBSD.org/cgi/query-pr.cgi?pr=113860
We don’t yet optimise 「% sh -c '{ echo a; sleep 10;}&'; sleep 1; ps T」 so
the FreeBSD® sh approach cannot work for us, but scanning the “sh -c” argu‐
ment for disallowed characters and, if not, setting a flag that enables the
shell to exec the tree when parsed as TCOM *and not c_trap()* was possible.
Disallowed characters are currently C_QUOTE except space, that is:
Tab Newline " # $ & ' ( ) * ; < = > ? [ \ ] ` |
This should catch all cases of magic, variables, subshells, pipelines, etc.
XXX we could track whether tty_fd has already been successfully opened,
XXX the ttystate initialised, and then just never close it unless it is
XXX necessary, then we can keep COLUMNS/LINES accurate in scripts, even
remainging CIDs not listed are either
• false positive (bug in coverity)
• intentional (possibly with lint override coverity doesn't parse)
• VLA (XXX find out how to mix C99 and ANSI VLAs)
• things flagged as possible resource leaks I have no idea about
(no biggie though, and only in error cases I think)
This was actually more evil:
• use a recursive function to display blocks in reverse order,
so that local variable values overwrite global ones
• add array support to typeset -p (from typeset -p -)
• display 'set -A varname' line before setting values, for -p
• if -p got arguments, only display those (from the innermost scope)
Also, the usual amount of code cleanup…
to get rid of the bias introduced by making the hash never zero
… he also pointed out a memory (heap) usage optimisation… which
may impact code size a bit though as I’d need to pass an additional
argument on hashtable function calls… or, forgo the benefit of not
having to pointer-align the key in the structure, which can be as
much as 3/7 octets per item, heap storage… OTOH the saved space is
4/8 octets per not-allocated item, possibly some code (use of an
multiply-add opcode), but the function call overhead/cost would
possibly be quite a bit… I guess I’ll have to measure…
XXX in the future, the entire scheme must be rethinked when we need more
XXX entropy for the hash tables; possibly a cheap add using NZAT and re-
XXX initialise the LCG only on access and when added (so keep NZAT state
XXX separate from LCG state); also, then we will need a more elaborate
XXX scheme, such as adding from environment, editor keypresses and timing
• strlcpy
• utf_wcwidth
note strchr/strstr from misc.c are still #ifdef DEBUG only, as they are
not eligible: they’re for const-cleanliness debugging purposes
XXX get rid of multiple occurrences of binary search code, too…
• promote SCO OpenServer and UnixWare to !oswarn
• omit trying -O2/-O on OpenServer 5 and USL C
• cast mksh_ari_t to int, mksh_uari_t to unsigned int for printf
• skip ulimit-1 on syllable (which is still too broken)
• write ((mksh_ari_t)-2147483648) ipv UB ((mksh_ari_t)1 << 31)
and add a comment that that is actually meant
• rewrite functions returning !void ending in NOTREACHED
so they’ve got a jump target returning an error at the
end, to aid older compilers and just to be safe
• cast struct stat.st_size to off_t or size_t explicitly when needed
• shorten struct env by two bytes and an alignment, at least
also, optimise control flow and fix more paren matching cases
is not found, from a suggestion by RT (LP: #912691)
• try harder (in a loop) to acquire a file lock if the locking mechanism
documents EINTR is a possibility (fcntl always, flock on Linux not .Ox)
• use -std=c99 not -std=gnu99 if it must be at all
00:45 -!- variable [root@freebsd/developer/variable] has joined #!/bin/mksh
• +b *!*root@*, +b $a:root, +b $r:root on one more channel
• certain checks to prevent:
00:47 < variable> wjcw: sh.h:308: error: conflicting types for 'getrusage'
01:19 < variable> oh
01:19 < variable> I needed to run Build.sh
deep changes into R40-stable branch
• Version accordingly: HEAD gets 2012/03/24 (hi Eddy/Chris) so we backdate
$KSH_VERSION for R40-stable to 2012/03/20 (hi David) as that comes before
even though it includes today’s latest fixes
• Also, sync clog (including MFC indicators)
if we find any, but not later; do not check on every read
⇒ allows changing COLUMNS and LINES (independent of each other, or both)
for script shells by passing them in an environment setting, even if
we get a tty; interactive shells still check before each line is read…
reported by the PLD guys, thanks
prerequisites are actually fulfilled, i.e. evrn further down than with
the last commit doing this, and move some prerequisites of stuff that
has wandered outside the !INCLUDES_ONLY block with the compile-time
assert changes to the outside, too
fixes FTBFS on MSYS which has neither <stdint.h> nor uint32_t
reported by RT
handle any more, octal 010 style constants, as promised
• overhaul the manpage re. arithmetic expressions, make the guarantees
mksh code has explicitly, precisely, clear
• to reduce burden of the compiler, getint() now operates on mksh_uari_t
internally; it already applied the sign after operation, anyway (C99
guarantees wraparound on unsigned types, but for signed types we need
specific compiler support; apparently, this comes from hardware limits)
• use const and shuffle order of locals around while here
in the cases where they are defined unambiguously; bug reported by
Jilles Tjoelker in <20111129232526.GC14357@stack.nl> due to a report
by Stefano Lattarini on bug-autoconf
in the ambiguous case, I stick to traditional pdksh behaviour, which means
test ! a = b vs. test a = b
and
test ! a -o b vs. test a -o b
behave different from each other (in the second case, the NOT operator
binds strong; POSIX demands a reduction to 3 arguments and negating
that result in the first case), so we're at two known not-ok in the
FreeBSD® testsuite. (81 and 82 in regress.sh,v 1.3)
move /etc/{,suid_}profile to /system/etc/ for Android (but do not make
the location of /etc configurable); rewrite manpage section about
/etc/{,suid_}profile, .profile, .mkshrc
• while here, reformat 'struct tbl' comment-wise and placement-wise
and drop the Tflag typedef
• while here, write regression test for the "global" built-in, which
does what typeset is supposed to do except that it doubles as "local"
• IBM XL C: display version better (tested on V7.0 by cnuke@)
• do not 'IFS=: read nr name', Cygwin 1.7 dash fails it
• disable cd-pe, glob-range-3 on Cygwin (the former cannot
succeed because the mv fails, the latter fails from 1.7 on)
• mark heredoc-tmpfile-8 as need-pass: no
• apply __attribute__ only to a function prototype, not to
the body (even if static), since xlC fails that
• bump version to R40 (beta)
Testsuite:
• add new need-pass: {yes|no} attribute, default yes
• exit with 1 if a need-pass test failed unexpectedly
idea by Kacper Kornet <draenog@pld-linux.org>
• mark utf8bom-2 as need-pass: no
Infrstructure:
• add housekeeping function for making a tty raw
• switch functions with unused results to void
• struct op: u.charflag contains last char of ;; in TPAT
• var.c:arraysearch is now a global function
Language:
• add ;& (fall through) and ;| (examine next) delimiters
in addition to ;; (end case) as zsh extensions, because
POSIX standardised on ;& already
• add -A (read into array), -N (read exactly n bytes),
-n (read up to n bytes), -t (timeout) flags for read
from ksh93
• allow read -N -1 or -n -1 to slurp the entire input
• add -a (read into array the input characters) extension
specific to mksh to read, idea by David Korn
• add -e (exit with error if PWD was not set correctly
after a physical cd) to cd builtin, mandated by next
POSIX, and change error codes accordingly
Rewrites:
• full rewrite of read builtin and its manpage section
• add regression tetss for most of the new functionality
• duplicate hexdump demo tests for use of read -a
• use read -raN-1 in dot.mkshrc to get NUL safe base64,
DJB cdb hash and Jenkins one-at-a-time hash functions
• don’t leak memory parsing possible I/O redirection tokens
• get rid of volatile by using more const (also helps codegen, methinks)
• support empty here document markers (mksh extension)
• pimp the manpage
• ensure that bool/true/false are cpp macros, overriding any pre-defined
• document the requirement that tobool(x) must map any-type 'x' into bool
• document the requirement that a bool must only be true or false, and
that it (tobool() rather) must have an identity mapping to 'short'
• possibly fix ksh_func for/and fpFUNCTf – maybe spotted by cnuke@
a bit more with POSIX and the other shells
I considered http://austingroupbugs.net/view.php?id=253 but the use
of bi_errorf() is interesting, especially as it’s often enough a
noreturn function, and funnily enough, 'cd -P /foo' returns 0 while
'chdir -P /foo' fails (so idk where to put -e)…
⇒ consider merging simplify_path()
• move funcs.c:c_cd() to misc.c
• make misc.c:make_path() static, c_cd() is its only user
⇒ mark as obsolete
• tweak misc.c:set_current_wd() to drop ksh_get_wd() argument
should be no code change, but the entire path stuff is a mess…
so expect actual implementation changes or even rewrites shortly
and switches to the TARGET_OS=Linux
• introduce android as regression test suite category
• add an android specific standard alias
• clean up redundant ‘-o sh’ arg in a few checks
UTF-8 BOM instead (UTFMODE has a separate value now for activated
during BOM skipping)
• parsing a COMSUB now skips UTF-8 BOM, too, but only temporarily
(token stream, lexer output / parser input), EOS terminated, let
SASPAREN use the same lexing as SBASE (e.g. COMSUB recursively)
• make wdstrip recursive
• fix processing of COMSUB in wdstrip
⇒ pass comsub-1 test
• expose another debugging function
• use shf_putc (macro), shf_putchar (function) ipv tputc
• replace shf_putchar(x,y) calls for side-effect-less x with shf_putc
• plug another bug in the tree code – '\' → "\\" (backslashes must be
escaped inside double quotes, too)
• adjust testsuite (and, I _had_ wondered…)
EOF) # works again now, plugging a regression
• rewrite the here document parsing code to be *much* more efficient
(and a bit more readable too!) using goto, while here (no kidding)
① currently: ((cond) ? true : false) but (!!(cond)) and casting to bool,
the latter only if stdbool.h, would also work – which performs best on
(and across) all supported systems?
instead, but the parser for the so-called “backticks” (U+0060) still emits
plaintext COMSUB wdstrings, and the evaluation code emits plaintext if the
code is not run (‘-n’ option), so it’s not worth the effort and memory ma-
nagement issues, even though it _would_ optimise the most common case…
Bump version numbers, sync regression tests; add one testcase from the old
webpages too. Sync manpage, this now works, but keep the workaround in, as
“portability issue” with slightly changed wording.
Also, /bin/sleep must be used in one manpage example if sleep is built in.
• functions called by mksh’s grouping memory allocator
• functions called by mksh code itself
the latter may be changed to call the internal grouping allocator,
if a porter so desires (but if this were recommended, the code in
question would already do so, so…)
• PIPESTATUS now supported (like bash 2) whose last member
may actually differ from $? since the latter may not be the
result of a pipeline partial command
• add regression tests, documentation, etc.
• in interactive mode, always look up {LC_{ALL,CTYPE},LANG} environment
variables if setlocale/nl_langinfo(CODESET) doesn’t suffice
• add the ability to call any builtin (some don't make sense or wouldn't
work) directly by analysing argv[0]
• for direct builtin calls, the {LC_{ALL,CTYPE},LANG} environment
variables determine utf8-mode, even if MKSH_ASSUME_UTF8 was set
• when called as builtin, echo behaves POSIXish
• add domainname as alias for true on MirBSD only, to be able to link it
• sync mksh Makefiles with Build.sh output
• adjust manpage wrt release plans
• link some things to mksh now that we have callable builtins:
bin/echo bin/kill bin/pwd bin/sleep (exact matches)
bin/test bin/[ (were scripts before)
bin/domainname=usr/bin/true usr/bin/false (move to /bin/ now)
• drop linked utilities and, except for echo and kill, their manpages
• adjust instbin and link a few more there as well
a mirtoconf check, would’ve been a real problem on an LP64 platform
• sh.h: work around a bad interaction between -Wformat on gcc and manual
string pooling for T_synerr, which is used in place of a format string
in some places
tg