- Updated the admin interface dependencies.
- Replace bootstrap-native with bootstrap
- Added auto theme with an option to switch to dark/light
- Some small color changes
- Added an dev only function to always load static files from disk
Some clients (Thirdparty) might use the `Authorization` header instead
of a query param. We didn't supported this since all the official
clients do not seem to use this way of working. But Bitwarden does check
both ways.
This PR adds an extra check for this header which can be optional.
Fixes#3776
needed for web-v2023.8.2+ compatibility due to the inclusion of the new
trusted device encryption feature. without this change, the web vault
will assume that you don't have a master password set and force you to
set one.
in web-v2023.8.x the getPlans() call was changed from `/plans/` to `/plans/all`
and the create new organization form also requires a bitwardenProduct to
differentiate between plans for PasswordManager and the SecretsManager
Some optimizations in regards to downloading Favicon's.
I also encounterd some issues with accessing some sites where the
connection got dropped or closed early. This seems a reqwest/hyper
thingy, https://github.com/hyperium/hyper/issues/2136. This is now also
fixed.
General:
- Decreased struct size
- Decreased memory allocations
- Optimized tokenizer a bit more to only emit tags when all attributes are there and are valid.
reqwest/hyper connection issue:
The following changes helped solve the connection issues to some sites.
The endresult is that some icons are now able to be downloaded always instead of sometimes.
- Enabled some extra reqwest features, `deflate` and `native-tls-alpn`
(Which do not bring in any extra crates since other crates already enabled them, but they were not active for Vaultwarden it self)
- Configured reqwest to have a max amount of idle pool connections per host
- Configured reqwest to timeout the idle connections in 10 seconds
When a user does not have an account yet and SMTP was disabled it would
set the UserOrg status still to Accepted, though that would make it
possible to verify the user by the Org Admin's.
This would fail, since the user didn't actually crated his account, and
therefor no PublicKey existed.
This PR fixes this behaviour by checking if the password is empty and if
so, puts the user to an `Invited` state instead of `Accepted`.
Fixes#3737
- Do not update `externalId` on group updates
Groups are only updated via the web-vault currently, and those do not
send the `externalId` value, and thus we need to prevent updating it.
- Refactored some other ExternalId functions
- Prevent empty `externalId` on `Collections`
- Return `externalId` for users
Fixes#3685
In a previous commit push notifications for mobile were added, but this
introduced a header guard which caused issues with anonymous endpoints.
This PR fixes this by using a uuid with only 0's.
Fixes#3607
Merging a PR from @Kurnihil into the already rebased branch.
Made some small changes to make it work with newer changes.
Some finetuning is probably still needed.
Co-authored-by: Daniele Andrei <daniele.andrei@geo-satis.com>
Co-authored-by: Kurnihil
This is a WIP for adding organization token login support.
It has basic token login and verification support, but that's about it.
This branch is a refresh of the previous version, and will contain code
from a PR based upon my previous branch.
When you are not loggedin, and have no cookie etc.. we always returned a 401.
This was mainly to allow the login page on all the sub pages, and after
login being redirected to the requested page, for these pages a 401 is a
valid response, since, you do not have access.
But for the main `/admin` page, it should just respond with a `200` and
show the login page.
This PR fixes this flow and response. It should prevent people using
Fail2ban, or other tools being triggered by only accessing the login page.
Resolves#3540
There now is a `v0.5` branch which will be the final release version
when the time is there. Switched to this instead of the `master` branch
which contains other fixes and enhancements as well (for `v0.6`).
This should solve all the endpoint issue we were having.
During setting the latest commit hash for Rocket and updating all the
other crates, there were some messages regarding the usage of `String`
for the Rocket endpoint function calls. I acted upon this message and
changed all `String` types to `&str` and modified the code where needed.
This ended up in less alloc calls, and probably also a bit less memory usage.
- Updated all the crates and commit hashes
- Modified all `String` to `&str` where applicable
- Fixed issue with domains starting with `admin`
- Fixed issue with DUO not being enabled globally anymore (regression)
- Renamed `Ciphers` to `Entries` in overview
- Improved `ADMIN_TOKEN` description
- Updated jquery-slim and datatables
Resolves#3382Resolves#3415
Resolves discussion on #3288
This PR implements a (not yet fully released) new feature of Rocket which allows WebSockets/Upgrade connections.
No more need for multiple ports to be opened for Vaultwarden.
No explicit need for a reverse proxy to get WebSockets to work (Although I still suggest to use a reverse proxy).
- Using a git revision for Rocket, since `rocket_ws` is not yet released.
- Updated other crates as well.
- Added a connection guard to clear the WS connection from the Users list.
Fixes#685Fixes#2917Fixes#1424
For some reason I encountered a strange bug which resulted in sending
out multiple websocket notifications for the exact same user.
Added a `distinct()` for the query to filter out multiple uuid's.
the client will ignore the value of theses fields in case of `PBKDF2`
(whether they are unset or left from trying out `Argon2id` as KDF).
with `Argon2id` those fields should never be `null` but always in a
valid state. if they are `null` (how would that even happen?) the
client still assumes default values for `Argon2id` (i.e. m=64 and p=4)
and if they are set to something else login will fail anyway.
There was used a wrong macro to produce an error message when mailing
the user his password was reset failed. It was using `error!()` which
does not return an `Err` and aborts the rest of the code.
This resulted in the users password still being resetted, but not being
notified. This PR fixes this by using `err!()`. Also, do not set the
user object as mutable until it really is needed.
Second, when a user was using the new Argon2id KDF with custom values
like memory and parallelism, that would have rendered the password
incorrect. The endpoint which should return all the data did not
returned all the new Argon2id values.
Fixes#3388
Co-authored-by: Stefan Melmuk <509385+stefan0xC@users.noreply.github.com>
- Updated workflows to use new checkout version
This probably fixes the curl download for hadolint also.
- Updated crates including Rocket to the latest rc3 :party:
- Applied 2 nightly clippy lints to prevent future clippy issues.
Since we now use the `ClientIp` Guard on a lot more places, it also
increases the size of binary, and the macro generated code because of
this extra Guard. By merging the `ClientIp` Guard with the several
`Header` guards we have it reduces the amount of code generated
(including LLVM IR), but also a small speedup in build time.
I also spotted some small `json!()` optimizations which also reduced the
amount of code generated.
- Changed MSRV to v1.65.
Discussed this with @dani-garcia, and we will support **N-2**.
This is/will be the same as for the `time` crate we use.
Also updated the wiki regarding this https://github.com/dani-garcia/vaultwarden/wiki/Building-binary
- Removed backtrace crate in favor of `std::backtrace` stable since v1.65
- Updated Rust to v1.67.1
- Updated all the crates
- Updated the GHA action versions
- Adjusted the GHA MSRV build to extract the MSRV from `Cargo.toml`
There was a small bug left in regards to the web-vault v2023.2.0 fixes.
This PR fixes the left items. I think all should be addressed now.
When editing a User, you were not able to see or edit groups, or see
wich collections a user bellonged to.
Fixes#3311
Rocket automatically implements a HEAD route when there's a matching GET
route, but relying on this behavior also means a spurious error gets
logged due to <https://github.com/SergioBenitez/Rocket/issues/1098>.
Add explicit HEAD routes for `/` and `/alive` to prevent uptime monitoring
services from generating error messages like `No matching routes for HEAD /`.
With these new routes, `HEAD /` only checks that the server can respond over
the network, while `HEAD /alive` also checks that the database connection is
alive, similar to `GET /alive`.
Added support for Argon2 hashing support for the `ADMIN_TOKEN` instead
of only supporting a plain text string.
The hash must be a PHC string which can be generated via the `argon2`
CLI **or** via the also built-in hash command in Vaultwarden.
You can simply run `vaultwarden hash` to generate a hash based upon a
password the user provides them self.
Added a warning during startup and within the admin settings panel is
the `ADMIN_TOKEN` is not an Argon2 hash.
Within the admin environment a user can ignore that warning and it will
not be shown for at least 30 days. After that the warning will appear
again unless the `ADMIN_TOKEN` has be converted to an Argon2 hash.
I have also tested this on my RaspberryPi 2b and there the `Bitwarden`
preset takes almost 4.5 seconds to generate/verify the Argon2 hash.
Using the `OWASP` preset it is below 1 second, which I think should be
fine for low-graded hardware. If it is needed people could use lower
memory settings, but in those cases I even doubt Vaultwarden it self
would run. They can always use the `argon2` CLI and generate a faster hash.
- Updated datatables
- Added NTP Time check
- Added Collections, Groups and Events count for orgs
- Renamed `Items` to `Ciphers`
- Some small style updates
- Supports the new Collection/Group/User editing UI's
- Support `/partial` endpoint for cipher updating to allow folder and favorite update for read-only ciphers.
- Prevent `Favorite`, `Folder`, `read-only` and `hide-passwords` from being added to the organizational sync.
- Added and corrected some `Object` key's to the output json.
Fixes#3279
In the org vault view, the Bitwarden web vault currently tries to fetch the
groups for an org regardless of whether it claims to have group support.
If this errors out, no vault items are displayed.
I messed up with identation sorry it's my first PR
Fix Collection Read Only access for groups
Fix Collection Read Only access for groups
With indentation modification
With existing groups configured within an org, deleting that org would
fail because of Foreign Key issues.
This PR fixes this by making sure the groups get deleted before the org does.
Fixes#3247
During the client API login we need to have a `device_identifier`, `device_name` and `device_type`.
When these were not provided Vaultwarden would panic.
This PR add checks for these fields and makes sure it returns a better error message instead of causing a panic.
When an icon will not be downloaded due to matching a configured
blacklist, ensure that the log message indicates the type of blacklist
that was matched.
the client does not send the key on every update of an emergency access
contact so the field would be emptied on a change of the wait days or access level.
When a non sqlite database is used, loading the admin interface fails
because the backup button is not generated.
This PR is solves it by checking if the elements are valid.
Also made some other changes and fixed some eslint errors.
Showing `_post` errors is better now.
Update jquery to latest version.
Fixes#3166
We also need to validate the note sizes on key-rotation.
If we do not validate them before we store them, that could lead to a
partial or total loss of the password vault. Validating these
restrictions before actually processing them to store/replace the
existing ciphers should prevent this.
There was also a small bug when using web-sockets. The client which is
triggering the password/key-rotation change should not be forced to
logout via a web-socket request. That is something the client will
handle it self. Refactored the logout notification to either send the
device uuid or not on specific actions.
Fixes#3152
- Change default Password Hash KDF Storage from 100_000 to 600_000 iterations
- Update Password Hash when the default iteration value is different
- Validate password_iterations
- Validate client-side KDF to prevent it from being set lower than 100_000
The Organization member overview supports showing an icon if the user
has MFA enabled or not. This PR adds this feature.
This is very useful if you want to enable force mfa for example.
As mentioned in #3111, using a very very large vault causes some issues.
Mainly because of a SQLite limit, but, it could also cause issue on
MariaDB/MySQL or PostgreSQL. It also uses a lot of memory, and memory
allocations.
This PR solves this by removing the need of all the cipher_uuid's just
to gather the correct attachments.
It will use the user_uuid and org_uuid's to get all attachments linked
to both, weither the user has access to them or not. This isn't an
issue, since the matching is done per cipher and the attachment data is
only returned if there is a matching cipher to where the user has access to.
I also modified some code to be able to use `::with_capacity(n)` where
possible. This prevents re-allocations if the `Vec` increases size,
which will happen a lot if there are a lot of ciphers.
According to my tests measuring the time it takes to sync, it seems to
have lowered the duration a bit more.
Fixes#3111
Recent versions of the Bitwarden clients (see bitwarden/clients#3574)
won't parse non-JSON responses. The most noticeable consequence is that
`/api/accounts/revision-date` responses won't be parsed, leading to
`/api/sync` always being called, even when it's not necessary.
When importing to Vaultwarden (or Bitwarden) notes larger then 10_000
encrypted characters are invalid. This because it for one isn't
compatible with Bitwarden. And some clients tend to break on very large
notes.
We already added a check for this limit when adding a single cipher, but
this caused issues during import, and could cause a partial imported
vault. Bitwarden does some validations before actually running it
through the import process and generates a special error message which
helps the user indicate which items are invalid during the import.
This PR adds that validation check and returns the same kind of error.
Fixes#3048
As kinda discussed here #3090, the messages regarding loading the
configuration files is a bit strange or unclear. There have been some
other reports regarding this in the past, but wasn't that big a of a
deal.
But to make the whole process it bit more nice, this PR adjusts the way
it reports issues and some small changes to the messages to make it all
a bit more clear.
- Do not report a missing `.env` file, but only send a message when using one.
- Exit instead of Panic, a panic causes a stacktrace, which isn't needed
here. I'm using a exit code 255 here so it is different to the other
exit's we use.
- Exit on more issues, since if we continue, it could cause
configuration issues if the user thinks all is fine.
- Use the actual env file used in the messages instead of `.env`.
- Added a **INFO** message when loading the `config.json`.
This makes it consistent with the info message for loading the env file.
Resolves#3090
Previously the websocket notifications were using `app_id` as the
`ContextId`. This was incorrect and should have been the device_uuid
from the client device executing the request. The clients will ignore
the websocket request if the uuid matches. This also fixes some issues
with the Desktop client which is able to modify attachments within the
same screen and causes an issue when saving the attachment afterwards.
Also changed the way to handle removed attachments, since that causes an
error saving the vault cipher afterwards, complaining about a missing
attachment. Bitwarden ignores this, and continues with the remaining
attachments (if any). This also fixes#2591 .
Further some more websocket notifications have been added to some other
functions which enhance the user experience.
- Logout users when deauthed, changed password, rotated keys
- Trigger OrgSyncKeys on user confirm and removal
- Added some extra to the send feature
Also renamed UpdateTypes to match Bitwarden naming.
If the `YUBICO_SERVER` is defined to an empty string, the whole yubikey
implementation doesn't work anymore.
This PR adds a check for this variable that it at least starts with `https://`.
Resolves#3003
- Removed `unsafe-inline` for javascript from CSP.
The admin interface now uses files instead of inline javascript.
- Modified javascript to work not being inline.
- Run eslint over javascript and fixed some items.
- Added a `to_json` Handlebars helper.
Used at the diagnostics page.
- Changed `AdminTemplateData` struct to be smaller.
The `config` was always added, but only used at one page.
Same goes for `can_backup` and `version`.
- Also inlined CSS.
We can't remove the `unsafe-inline` from css, because that seems to
break the web-vault currently. That might need some further checks.
But for now the 404 page and all the admin pages are clear of inline scripts and styles.
BlackDex
Daniel García
Stefan Melmuk
Stefan Melmuk
Bernd Schoolmann
GeekCorner
Jan Jansen
Folke Ashberg
sirux88
Jeremy Lin
Tim Vilgot Mikael Fredenberg
kennymc-c
Nikolay Nikolaev
Dylan Pinsonneault
Jonathan Elias Caicedo
Jeremy Lin
Nils Mittler
Misterbabou
soruh
Helmut K. C. Tessarek
BlockListed
Kevin P. Fleming
Daniel Hammer
Rychart Redwerkz
pjsier
Alex Martel
Andrés Maldonado