OpenVoiceOS/buildroot-external/rootfs-overlay/etc/avrdude-gpio.conf

14557 lines
460 KiB
Plaintext

# $Id: avrdude.conf.in 1294 2014-03-12 23:03:18Z joerg_wunsch $ -*- text -*-
#
# AVRDUDE Configuration File
#
# This file contains configuration data used by AVRDUDE which describes
# the programming hardware pinouts and also provides part definitions.
# AVRDUDE's "-C" command line option specifies the location of the
# configuration file. The "-c" option names the programmer configuration
# which must match one of the entry's "id" parameter. The "-p" option
# identifies which part AVRDUDE is going to be programming and must match
# one of the parts' "id" parameter.
#
# Possible entry formats are:
#
# programmer
# parent <id> # optional parent
# id = <id1> [, <id2> [, <id3>] ...] ; # <idN> are quoted strings
# desc = <description> ; # quoted string
# type = <type>; # programmer type, quoted string
# # supported programmer types can be listed by "-c ?type"
# connection_type = parallel | serial | usb
# baudrate = <num> ; # baudrate for avr910-programmer
# vcc = <num1> [, <num2> ... ] ; # pin number(s)
# buff = <num1> [, <num2> ... ] ; # pin number(s)
# reset = <num> ; # pin number
# sck = <num> ; # pin number
# mosi = <num> ; # pin number
# miso = <num> ; # pin number
# errled = <num> ; # pin number
# rdyled = <num> ; # pin number
# pgmled = <num> ; # pin number
# vfyled = <num> ; # pin number
# usbvid = <hexnum>; # USB VID (Vendor ID)
# usbpid = <hexnum> [, <hexnum> ...] # USB PID (Product ID) (1)
# usbdev = <interface>; # USB interface or other device info
# usbvendor = <vendorname>; # USB Vendor Name
# usbproduct = <productname>; # USB Product Name
# usbsn = <serialno>; # USB Serial Number
#
# To invert a bit, use = ~ <num>, the spaces are important.
# For a pin list all pins must be inverted.
# A single pin can be specified as usual = ~ <num>, for lists
# specify it as follows = ~ ( <num> [, <num2> ... ] ) .
#
# (1) Not all programmer types can process a list of PIDs.
# ;
#
# part
# id = <id> ; # quoted string
# desc = <description> ; # quoted string
# has_jtag = <yes/no> ; # part has JTAG i/f
# has_debugwire = <yes/no> ; # part has debugWire i/f
# has_pdi = <yes/no> ; # part has PDI i/f
# has_tpi = <yes/no> ; # part has TPI i/f
# devicecode = <num> ; # deprecated, use stk500_devcode
# stk500_devcode = <num> ; # numeric
# avr910_devcode = <num> ; # numeric
# signature = <num> <num> <num> ; # signature bytes
# usbpid = <num> ; # DFU USB PID
# chip_erase_delay = <num> ; # micro-seconds
# reset = dedicated | io;
# retry_pulse = reset | sck;
# pgm_enable = <instruction format> ;
# chip_erase = <instruction format> ;
# chip_erase_delay = <num> ; # chip erase delay (us)
# # STK500 parameters (parallel programming IO lines)
# pagel = <num> ; # pin name in hex, i.e., 0xD7
# bs2 = <num> ; # pin name in hex, i.e., 0xA0
# serial = <yes/no> ; # can use serial downloading
# parallel = <yes/no/pseudo>; # can use par. programming
# # STK500v2 parameters, to be taken from Atmel's XML files
# timeout = <num> ;
# stabdelay = <num> ;
# cmdexedelay = <num> ;
# synchloops = <num> ;
# bytedelay = <num> ;
# pollvalue = <num> ;
# pollindex = <num> ;
# predelay = <num> ;
# postdelay = <num> ;
# pollmethod = <num> ;
# mode = <num> ;
# delay = <num> ;
# blocksize = <num> ;
# readsize = <num> ;
# hvspcmdexedelay = <num> ;
# # STK500v2 HV programming parameters, from XML
# pp_controlstack = <num>, <num>, ...; # PP only
# hvsp_controlstack = <num>, <num>, ...; # HVSP only
# hventerstabdelay = <num>;
# progmodedelay = <num>; # PP only
# latchcycles = <num>;
# togglevtg = <num>;
# poweroffdelay = <num>;
# resetdelayms = <num>;
# resetdelayus = <num>;
# hvleavestabdelay = <num>;
# resetdelay = <num>;
# synchcycles = <num>; # HVSP only
# chiperasepulsewidth = <num>; # PP only
# chiperasepolltimeout = <num>;
# chiperasetime = <num>; # HVSP only
# programfusepulsewidth = <num>; # PP only
# programfusepolltimeout = <num>;
# programlockpulsewidth = <num>; # PP only
# programlockpolltimeout = <num>;
# # JTAG ICE mkII parameters, also from XML files
# allowfullpagebitstream = <yes/no> ;
# enablepageprogramming = <yes/no> ;
# idr = <num> ; # IO addr of IDR (OCD) reg.
# rampz = <num> ; # IO addr of RAMPZ reg.
# spmcr = <num> ; # mem addr of SPMC[S]R reg.
# eecr = <num> ; # mem addr of EECR reg.
# # (only when != 0x3c)
# is_at90s1200 = <yes/no> ; # AT90S1200 part
# is_avr32 = <yes/no> ; # AVR32 part
#
# memory <memtype>
# paged = <yes/no> ; # yes / no
# size = <num> ; # bytes
# page_size = <num> ; # bytes
# num_pages = <num> ; # numeric
# min_write_delay = <num> ; # micro-seconds
# max_write_delay = <num> ; # micro-seconds
# readback_p1 = <num> ; # byte value
# readback_p2 = <num> ; # byte value
# pwroff_after_write = <yes/no> ; # yes / no
# read = <instruction format> ;
# write = <instruction format> ;
# read_lo = <instruction format> ;
# read_hi = <instruction format> ;
# write_lo = <instruction format> ;
# write_hi = <instruction format> ;
# loadpage_lo = <instruction format> ;
# loadpage_hi = <instruction format> ;
# writepage = <instruction format> ;
# ;
# ;
#
# If any of the above parameters are not specified, the default value
# of 0 is used for numerics or the empty string ("") for string
# values. If a required parameter is left empty, AVRDUDE will
# complain.
#
# Parts can also inherit parameters from previously defined parts
# using the following syntax. In this case specified integer and
# string values override parameter values from the parent part. New
# memory definitions are added to the definitions inherited from the
# parent.
#
# part parent <id> # quoted string
# id = <id> ; # quoted string
# <any set of other parameters from the list above>
# ;
#
# NOTES:
# * 'devicecode' is the device code used by the STK500 (see codes
# listed below)
# * Not all memory types will implement all instructions.
# * AVR Fuse bits and Lock bits are implemented as a type of memory.
# * Example memory types are:
# "flash", "eeprom", "fuse", "lfuse" (low fuse), "hfuse" (high
# fuse), "signature", "calibration", "lock"
# * The memory type specified on the avrdude command line must match
# one of the memory types defined for the specified chip.
# * The pwroff_after_write flag causes avrdude to attempt to
# power the device off and back on after an unsuccessful write to
# the affected memory area if VCC programmer pins are defined. If
# VCC pins are not defined for the programmer, a message
# indicating that the device needs a power-cycle is printed out.
# This flag was added to work around a problem with the
# at90s4433/2333's; see the at90s4433 errata at:
#
# http://www.atmel.com/dyn/resources/prod_documents/doc1280.pdf
#
# INSTRUCTION FORMATS
#
# Instruction formats are specified as a comma seperated list of
# string values containing information (bit specifiers) about each
# of the 32 bits of the instruction. Bit specifiers may be one of
# the following formats:
#
# '1' = the bit is always set on input as well as output
#
# '0' = the bit is always clear on input as well as output
#
# 'x' = the bit is ignored on input and output
#
# 'a' = the bit is an address bit, the bit-number matches this bit
# specifier's position within the current instruction byte
#
# 'aN' = the bit is the Nth address bit, bit-number = N, i.e., a12
# is address bit 12 on input, a0 is address bit 0.
#
# 'i' = the bit is an input data bit
#
# 'o' = the bit is an output data bit
#
# Each instruction must be composed of 32 bit specifiers. The
# instruction specification closely follows the instruction data
# provided in Atmel's data sheets for their parts.
#
# See below for some examples.
#
#
# The following are STK500 part device codes to use for the
# "devicecode" field of the part. These came from Atmel's software
# section avr061.zip which accompanies the application note
# AVR061 available from:
#
# http://www.atmel.com/dyn/resources/prod_documents/doc2525.pdf
#
#define ATTINY10 0x10 /* the _old_ one that never existed! */
#define ATTINY11 0x11
#define ATTINY12 0x12
#define ATTINY15 0x13
#define ATTINY13 0x14
#define ATTINY22 0x20
#define ATTINY26 0x21
#define ATTINY28 0x22
#define ATTINY2313 0x23
#define AT90S1200 0x33
#define AT90S2313 0x40
#define AT90S2323 0x41
#define AT90S2333 0x42
#define AT90S2343 0x43
#define AT90S4414 0x50
#define AT90S4433 0x51
#define AT90S4434 0x52
#define ATMEGA48 0x59
#define AT90S8515 0x60
#define AT90S8535 0x61
#define AT90C8534 0x62
#define ATMEGA8515 0x63
#define ATMEGA8535 0x64
#define ATMEGA8 0x70
#define ATMEGA88 0x73
#define ATMEGA168 0x86
#define ATMEGA161 0x80
#define ATMEGA163 0x81
#define ATMEGA16 0x82
#define ATMEGA162 0x83
#define ATMEGA169 0x84
#define ATMEGA323 0x90
#define ATMEGA32 0x91
#define ATMEGA64 0xA0
#define ATMEGA103 0xB1
#define ATMEGA128 0xB2
#define AT90CAN128 0xB3
#define AT90CAN64 0xB3
#define AT90CAN32 0xB3
#define AT86RF401 0xD0
#define AT89START 0xE0
#define AT89S51 0xE0
#define AT89S52 0xE1
# The following table lists the devices in the original AVR910
# appnote:
# |Device |Signature | Code |
# +-------+----------+------+
# |tiny12 | 1E 90 05 | 0x55 |
# |tiny15 | 1E 90 06 | 0x56 |
# | | | |
# | S1200 | 1E 90 01 | 0x13 |
# | | | |
# | S2313 | 1E 91 01 | 0x20 |
# | S2323 | 1E 91 02 | 0x48 |
# | S2333 | 1E 91 05 | 0x34 |
# | S2343 | 1E 91 03 | 0x4C |
# | | | |
# | S4414 | 1E 92 01 | 0x28 |
# | S4433 | 1E 92 03 | 0x30 |
# | S4434 | 1E 92 02 | 0x6C |
# | | | |
# | S8515 | 1E 93 01 | 0x38 |
# | S8535 | 1E 93 03 | 0x68 |
# | | | |
# |mega32 | 1E 95 01 | 0x72 |
# |mega83 | 1E 93 05 | 0x65 |
# |mega103| 1E 97 01 | 0x41 |
# |mega161| 1E 94 01 | 0x60 |
# |mega163| 1E 94 02 | 0x64 |
# Appnote AVR109 also has a table of AVR910 device codes, which
# lists:
# dev avr910 signature
# ATmega8 0x77 0x1E 0x93 0x07
# ATmega8515 0x3B 0x1E 0x93 0x06
# ATmega8535 0x6A 0x1E 0x93 0x08
# ATmega16 0x75 0x1E 0x94 0x03
# ATmega162 0x63 0x1E 0x94 0x04
# ATmega163 0x66 0x1E 0x94 0x02
# ATmega169 0x79 0x1E 0x94 0x05
# ATmega32 0x7F 0x1E 0x95 0x02
# ATmega323 0x73 0x1E 0x95 0x01
# ATmega64 0x46 0x1E 0x96 0x02
# ATmega128 0x44 0x1E 0x97 0x02
#
# These codes refer to "BOOT" device codes which are apparently
# different than standard device codes, for whatever reasons
# (often one above the standard code).
# There are several extended versions of AVR910 implementations around
# in the Internet. These add the following codes (only devices that
# actually exist are listed):
# ATmega8515 0x3A
# ATmega128 0x43
# ATmega64 0x45
# ATtiny26 0x5E
# ATmega8535 0x69
# ATmega32 0x72
# ATmega16 0x74
# ATmega8 0x76
# ATmega169 0x78
#
# Overall avrdude defaults; suitable for ~/.avrduderc
#
default_parallel = "unknown";
default_serial = "/dev/ttyS0";
# default_bitclock = 2.5;
# Turn off safemode by default
#default_safemode = no;
#
# PROGRAMMER DEFINITIONS
#
# http://wiring.org.co/
# Basically STK500v2 protocol, with some glue to trigger the
# bootloader.
programmer
id = "wiring";
desc = "Wiring";
type = "wiring";
connection_type = serial;
;
programmer
id = "arduino";
desc = "Arduino";
type = "arduino";
connection_type = serial;
;
# this will interface with the chips on these programmers:
#
# http://real.kiev.ua/old/avreal/en/adapters
# http://www.amontec.com/jtagkey.shtml, jtagkey-tiny.shtml
# http://www.olimex.com/dev/arm-usb-ocd.html, arm-usb-tiny.html
# http://www.ethernut.de/en/hardware/turtelizer/index.html
# http://elk.informatik.fh-augsburg.de/hhweb/doc/openocd/usbjtag/usbjtag.html
# http://dangerousprototypes.com/docs/FT2232_breakout_board
# http://www.ftdichip.com/Products/Modules/DLPModules.htm,DLP-2232*,DLP-USB1232H
# http://flashrom.org/FT2232SPI_Programmer
#
# The drivers will look for a specific device and use the first one found.
# If you have mulitple devices, then look for unique information (like SN)
# And fill that in here.
#
# Note that the pin numbers for the main ISP signals (reset, sck,
# mosi, miso) are fixed and cannot be changed, since they must match
# the way the Multi-Protocol Synchronous Serial Engine (MPSSE) of
# these FTDI ICs has been designed.
programmer
id = "avrftdi";
desc = "FT2232D based generic programmer";
type = "avrftdi";
connection_type = usb;
usbvid = 0x0403;
usbpid = 0x6010;
usbvendor = "";
usbproduct = "";
usbdev = "A";
usbsn = "";
#ISP-signals - lower ADBUS-Nibble (default)
reset = 3;
sck = 0;
mosi = 1;
miso = 2;
#LED SIGNALs - higher ADBUS-Nibble
# errled = 4;
# rdyled = 5;
# pgmled = 6;
# vfyled = 7;
#Buffer Signal - ACBUS - Nibble
# buff = 8;
;
# This is an implementation of the above with a buffer IC (74AC244) and
# 4 LEDs directly attached, all active low.
programmer
id = "2232HIO";
desc = "FT2232H based generic programmer";
type = "avrftdi";
connection_type = usb;
usbvid = 0x0403;
# Note: This PID is reserved for generic H devices and
# should be programmed into the EEPROM
# usbpid = 0x8A48;
usbpid = 0x6010;
usbdev = "A";
usbvendor = "";
usbproduct = "";
usbsn = "";
#ISP-signals
reset = 3;
sck = 0;
mosi = 1;
miso = 2;
buff = ~4;
#LED SIGNALs
errled = ~ 11;
rdyled = ~ 14;
pgmled = ~ 13;
vfyled = ~ 12;
;
#The FT4232H can be treated as FT2232H, but it has a different USB
#device ID of 0x6011.
programmer parent "avrftdi"
id = "4232h";
desc = "FT4232H based generic programmer";
usbpid = 0x6011;
;
programmer
id = "jtagkey";
desc = "Amontec JTAGKey, JTAGKey-Tiny and JTAGKey2";
type = "avrftdi";
connection_type = usb;
usbvid = 0x0403;
# Note: This PID is used in all JTAGKey variants
usbpid = 0xCFF8;
usbdev = "A";
usbvendor = "";
usbproduct = "";
usbsn = "";
#ISP-signals => 20 - Pin connector on JTAGKey
reset = 3; # TMS 7 violet
sck = 0; # TCK 9 white
mosi = 1; # TDI 5 green
miso = 2; # TDO 13 orange
buff = ~4;
# VTG VREF 1 brown with red tip
# GND GND 20 black
# The colors are on the 20 pin breakout cable
# from Amontec
;
# UM232H module from FTDI and Glyn.com.au.
# See helix.air.net.au for detailed usage information.
# J1: Connect pin 2 and 3 for USB power.
# J2: Connect pin 2 and 3 for USB power.
# J2: Pin 7 is SCK
# : Pin 8 is MOSI
# : Pin 9 is MISO
# : Pin 11 is RST
# : Pin 6 is ground
# Use the -b flag to set the SPI clock rate eg -b 3750000 is the fastest I could get
# a 16MHz Atmega1280 to program reliably. The 232H is conveniently 5V tolerant.
programmer
id = "UM232H";
desc = "FT232H based module from FTDI and Glyn.com.au";
type = "avrftdi";
usbvid = 0x0403;
# Note: This PID is reserved for generic 232H devices and
# should be programmed into the EEPROM
usbpid = 0x6014;
usbdev = "A";
usbvendor = "";
usbproduct = "";
usbsn = "";
#ISP-signals
sck = 1;
mosi = 2;
miso = 3;
reset = 4;
;
# C232HM module from FTDI and Glyn.com.au.
# : Orange is SCK
# : Yellow is MOSI
# : Green is MISO
# : Brown is RST
# : Black is ground
# Use the -b flag to set the SPI clock rate eg -b 3750000 is the fastest I could get
# a 16MHz Atmega1280 to program reliably. The 232H is conveniently 5V tolerant.
programmer
id = "C232HM";
desc = "FT232H based module from FTDI and Glyn.com.au";
type = "avrftdi";
usbvid = 0x0403;
# Note: This PID is reserved for generic 232H devices and
# should be programmed into the EEPROM
usbpid = 0x6014;
usbdev = "A";
usbvendor = "";
usbproduct = "";
usbsn = "";
#ISP-signals
sck = 1;
mosi = 2;
miso = 3;
reset = 4;
;
# On the adapter you can read "O-Link". On the PCB is printed "OpenJTAG v3.1"
# You can find it as "OpenJTAG ARM JTAG USB" in the internet.
# (But there are also several projects called Open JTAG, eg.
# http://www.openjtag.org, which are completely different.)
# http://www.100ask.net/shop/english.html (website seems to be outdated)
# http://item.taobao.com/item.htm?id=1559277013
# http://www.micro4you.com/store/openjtag-arm-jtag-usb.html (schematics!)
# some other sources which call it O-Link
# http://www.andahammer.com/olink/
# http://www.developmentboard.net/31-o-link-debugger.html
# http://armwerks.com/catalog/o-link-debugger-copy/
# or just have a look at ebay ...
# It is basically the same entry as jtagkey with different usb ids.
programmer parent "jtagkey"
id = "o-link";
desc = "O-Link, OpenJTAG from www.100ask.net";
usbvid = 0x1457;
usbpid = 0x5118;
usbvendor = "www.100ask.net";
usbproduct = "USB<=>JTAG&RS232";
;
# http://wiki.openmoko.org/wiki/Debug_Board_v3
programmer
id = "openmoko";
desc = "Openmoko debug board (v3)";
type = "avrftdi";
usbvid = 0x1457;
usbpid = 0x5118;
usbdev = "A";
usbvendor = "";
usbproduct = "";
usbsn = "";
reset = 3; # TMS 7
sck = 0; # TCK 9
mosi = 1; # TDI 5
miso = 2; # TDO 13
;
# Only Rev. A boards.
# Schematic and user manual: http://www.cs.put.poznan.pl/wswitala/download/pdf/811EVBK.pdf
programmer
id = "lm3s811";
desc = "Luminary Micro LM3S811 Eval Board (Rev. A)";
type = "avrftdi";
connection_type = usb;
usbvid = 0x0403;
usbpid = 0xbcd9;
usbvendor = "LMI";
usbproduct = "LM3S811 Evaluation Board";
usbdev = "A";
usbsn = "";
#ISP-signals - lower ACBUS-Nibble (default)
reset = 3;
sck = 0;
mosi = 1;
miso = 2;
# Enable correct buffers
buff = 7;
;
programmer
id = "avrisp";
desc = "Atmel AVR ISP";
type = "stk500";
connection_type = serial;
;
programmer
id = "avrispv2";
desc = "Atmel AVR ISP V2";
type = "stk500v2";
connection_type = serial;
;
programmer
id = "avrispmkII";
desc = "Atmel AVR ISP mkII";
type = "stk500v2";
connection_type = usb;
;
programmer parent "avrispmkII"
id = "avrisp2";
;
programmer
id = "buspirate";
desc = "The Bus Pirate";
type = "buspirate";
connection_type = serial;
;
programmer
id = "buspirate_bb";
desc = "The Bus Pirate (bitbang interface, supports TPI)";
type = "buspirate_bb";
connection_type = serial;
# pins are bits in bitbang byte (numbers are 87654321)
# 1|POWER|PULLUP|AUX|MOSI|CLK|MISO|CS
reset = 1;
sck = 3;
mosi = 4;
miso = 2;
#vcc = 7; This is internally set independent of this setting.
;
# This is supposed to be the "default" STK500 entry.
# Attempts to select the correct firmware version
# by probing for it. Better use one of the entries
# below instead.
programmer
id = "stk500";
desc = "Atmel STK500";
type = "stk500generic";
connection_type = serial;
;
programmer
id = "stk500v1";
desc = "Atmel STK500 Version 1.x firmware";
type = "stk500";
connection_type = serial;
;
programmer
id = "mib510";
desc = "Crossbow MIB510 programming board";
type = "stk500";
connection_type = serial;
;
programmer
id = "stk500v2";
desc = "Atmel STK500 Version 2.x firmware";
type = "stk500v2";
connection_type = serial;
;
programmer
id = "stk500pp";
desc = "Atmel STK500 V2 in parallel programming mode";
type = "stk500pp";
connection_type = serial;
;
programmer
id = "stk500hvsp";
desc = "Atmel STK500 V2 in high-voltage serial programming mode";
type = "stk500hvsp";
connection_type = serial;
;
programmer
id = "stk600";
desc = "Atmel STK600";
type = "stk600";
connection_type = usb;
;
programmer
id = "stk600pp";
desc = "Atmel STK600 in parallel programming mode";
type = "stk600pp";
connection_type = usb;
;
programmer
id = "stk600hvsp";
desc = "Atmel STK600 in high-voltage serial programming mode";
type = "stk600hvsp";
connection_type = usb;
;
programmer
id = "avr910";
desc = "Atmel Low Cost Serial Programmer";
type = "avr910";
connection_type = serial;
;
programmer
id = "ft245r";
desc = "FT245R Synchronous BitBang";
type = "ftdi_syncbb";
connection_type = usb;
miso = 1; # D1
sck = 0; # D0
mosi = 2; # D2
reset = 4; # D4
;
programmer
id = "ft232r";
desc = "FT232R Synchronous BitBang";
type = "ftdi_syncbb";
connection_type = usb;
miso = 1; # RxD
sck = 0; # TxD
mosi = 2; # RTS
reset = 4; # DTR
;
# see http://www.bitwizard.nl/wiki/index.php/FTDI_ATmega
programmer
id = "bwmega";
desc = "BitWizard ftdi_atmega builtin programmer";
type = "ftdi_syncbb";
connection_type = usb;
miso = 5; # DSR
sck = 6; # DCD
mosi = 3; # CTS
reset = 7; # RI
;
# see http://www.geocities.jp/arduino_diecimila/bootloader/index_en.html
# Note: pins are numbered from 1!
programmer
id = "arduino-ft232r";
desc = "Arduino: FT232R connected to ISP";
type = "ftdi_syncbb";
connection_type = usb;
miso = 3; # CTS X3(1)
sck = 5; # DSR X3(2)
mosi = 6; # DCD X3(3)
reset = 7; # RI X3(4)
;
# website mentioned above uses this id
programmer parent "arduino-ft232r"
id = "diecimila";
desc = "alias for arduino-ft232r";
;
programmer
id = "usbasp";
desc = "USBasp, http://www.fischl.de/usbasp/";
type = "usbasp";
connection_type = usb;
usbvid = 0x16C0; # VOTI
usbpid = 0x05DC; # Obdev's free shared PID
usbvendor = "www.fischl.de";
usbproduct = "USBasp";
# following variants are autodetected for id "usbasp"
# original usbasp from fischl.de
# see above "usbasp"
# old usbasp from fischl.de
#usbvid = 0x03EB; # ATMEL
#usbpid = 0xC7B4; # (unoffical) USBasp
#usbvendor = "www.fischl.de";
#usbproduct = "USBasp";
# NIBObee (only if -P nibobee is given on command line)
# see below "nibobee"
;
programmer
id = "nibobee";
desc = "NIBObee";
type = "usbasp";
connection_type = usb;
usbvid = 0x16C0; # VOTI
usbpid = 0x092F; # NIBObee PID
usbvendor = "www.nicai-systems.com";
usbproduct = "NIBObee";
;
programmer
id = "usbasp-clone";
desc = "Any usbasp clone with correct VID/PID";
type = "usbasp";
connection_type = usb;
usbvid = 0x16C0; # VOTI
usbpid = 0x05DC; # Obdev's free shared PID
#usbvendor = "";
#usbproduct = "";
;
programmer
id = "usbtiny";
desc = "USBtiny simple USB programmer, http://www.ladyada.net/make/usbtinyisp/";
type = "usbtiny";
connection_type = usb;
usbvid = 0x1781;
usbpid = 0x0c9f;
;
programmer
id = "butterfly";
desc = "Atmel Butterfly Development Board";
type = "butterfly";
connection_type = serial;
;
programmer
id = "avr109";
desc = "Atmel AppNote AVR109 Boot Loader";
type = "butterfly";
connection_type = serial;
;
programmer
id = "avr911";
desc = "Atmel AppNote AVR911 AVROSP";
type = "butterfly";
connection_type = serial;
;
# suggested in http://forum.mikrokopter.de/topic-post48317.html
programmer
id = "mkbutterfly";
desc = "Mikrokopter.de Butterfly";
type = "butterfly_mk";
connection_type = serial;
;
programmer parent "mkbutterfly"
id = "butterfly_mk";
;
programmer
id = "jtagmkI";
desc = "Atmel JTAG ICE (mkI)";
baudrate = 115200; # default is 115200
type = "jtagmki";
connection_type = serial;
;
# easier to type
programmer parent "jtagmkI"
id = "jtag1";
;
# easier to type
programmer parent "jtag1"
id = "jtag1slow";
baudrate = 19200;
;
# The JTAG ICE mkII has both, serial and USB connectivity. As it is
# mostly used through USB these days (AVR Studio 5 only supporting it
# that way), we make connection_type = usb the default. Users are
# still free to use a serial port with the -P option.
programmer
id = "jtagmkII";
desc = "Atmel JTAG ICE mkII";
baudrate = 19200; # default is 19200
type = "jtagmkii";
connection_type = usb;
;
# easier to type
programmer parent "jtagmkII"
id = "jtag2slow";
;
# JTAG ICE mkII @ 115200 Bd
programmer parent "jtag2slow"
id = "jtag2fast";
baudrate = 115200;
;
# make the fast one the default, people will love that
programmer parent "jtag2fast"
id = "jtag2";
;
# JTAG ICE mkII in ISP mode
programmer
id = "jtag2isp";
desc = "Atmel JTAG ICE mkII in ISP mode";
baudrate = 115200;
type = "jtagmkii_isp";
connection_type = usb;
;
# JTAG ICE mkII in debugWire mode
programmer
id = "jtag2dw";
desc = "Atmel JTAG ICE mkII in debugWire mode";
baudrate = 115200;
type = "jtagmkii_dw";
connection_type = usb;
;
# JTAG ICE mkII in AVR32 mode
programmer
id = "jtagmkII_avr32";
desc = "Atmel JTAG ICE mkII im AVR32 mode";
baudrate = 115200;
type = "jtagmkii_avr32";
connection_type = usb;
;
# JTAG ICE mkII in AVR32 mode
programmer
id = "jtag2avr32";
desc = "Atmel JTAG ICE mkII im AVR32 mode";
baudrate = 115200;
type = "jtagmkii_avr32";
connection_type = usb;
;
# JTAG ICE mkII in PDI mode
programmer
id = "jtag2pdi";
desc = "Atmel JTAG ICE mkII PDI mode";
baudrate = 115200;
type = "jtagmkii_pdi";
connection_type = usb;
;
# AVR Dragon in JTAG mode
programmer
id = "dragon_jtag";
desc = "Atmel AVR Dragon in JTAG mode";
baudrate = 115200;
type = "dragon_jtag";
connection_type = usb;
;
# AVR Dragon in ISP mode
programmer
id = "dragon_isp";
desc = "Atmel AVR Dragon in ISP mode";
baudrate = 115200;
type = "dragon_isp";
connection_type = usb;
;
# AVR Dragon in PP mode
programmer
id = "dragon_pp";
desc = "Atmel AVR Dragon in PP mode";
baudrate = 115200;
type = "dragon_pp";
connection_type = usb;
;
# AVR Dragon in HVSP mode
programmer
id = "dragon_hvsp";
desc = "Atmel AVR Dragon in HVSP mode";
baudrate = 115200;
type = "dragon_hvsp";
connection_type = usb;
;
# AVR Dragon in debugWire mode
programmer
id = "dragon_dw";
desc = "Atmel AVR Dragon in debugWire mode";
baudrate = 115200;
type = "dragon_dw";
connection_type = usb;
;
# AVR Dragon in PDI mode
programmer
id = "dragon_pdi";
desc = "Atmel AVR Dragon in PDI mode";
baudrate = 115200;
type = "dragon_pdi";
connection_type = usb;
;
programmer
id = "jtag3";
desc = "Atmel AVR JTAGICE3 in JTAG mode";
type = "jtagice3";
connection_type = usb;
usbpid = 0x2110, 0x2140;
;
programmer
id = "jtag3pdi";
desc = "Atmel AVR JTAGICE3 in PDI mode";
type = "jtagice3_pdi";
connection_type = usb;
usbpid = 0x2110, 0x2140;
;
programmer
id = "jtag3dw";
desc = "Atmel AVR JTAGICE3 in debugWIRE mode";
type = "jtagice3_dw";
connection_type = usb;
usbpid = 0x2110, 0x2140;
;
programmer
id = "jtag3isp";
desc = "Atmel AVR JTAGICE3 in ISP mode";
type = "jtagice3_isp";
connection_type = usb;
usbpid = 0x2110, 0x2140;
;
programmer
id = "xplainedpro";
desc = "Atmel AVR XplainedPro in JTAG mode";
type = "jtagice3";
connection_type = usb;
usbpid = 0x2111;
;
programmer
id = "atmelice";
desc = "Atmel-ICE (ARM/AVR) in JTAG mode";
type = "jtagice3";
connection_type = usb;
usbpid = 0x2141;
;
programmer
id = "atmelice_pdi";
desc = "Atmel-ICE (ARM/AVR) in PDI mode";
type = "jtagice3_pdi";
connection_type = usb;
usbpid = 0x2141;
;
programmer
id = "atmelice_dw";
desc = "Atmel-ICE (ARM/AVR) in debugWIRE mode";
type = "jtagice3_dw";
connection_type = usb;
usbpid = 0x2141;
;
programmer
id = "atmelice_isp";
desc = "Atmel-ICE (ARM/AVR) in ISP mode";
type = "jtagice3_isp";
connection_type = usb;
usbpid = 0x2141;
;
programmer
id = "pavr";
desc = "Jason Kyle's pAVR Serial Programmer";
type = "avr910";
connection_type = serial;
;
programmer
id = "pickit2";
desc = "MicroChip's PICkit2 Programmer";
type = "pickit2";
connection_type = usb;
;
programmer
id = "flip1";
desc = "FLIP USB DFU protocol version 1 (doc7618)";
type = "flip1";
connection_type = usb;
;
programmer
id = "flip2";
desc = "FLIP USB DFU protocol version 2 (AVR4023)";
type = "flip2";
connection_type = usb;
;
#This programmer bitbangs GPIO lines using the Linux sysfs GPIO interface
#
#To enable it set the configuration below to match the GPIO lines connected to the
#relevant ISP header pins and uncomment the entry definition. In case you don't
#have the required permissions to edit this system wide config file put the
#entry in a separate <your name>.conf file and use it with -C+<your name>.conf
#on the command line.
#
#To check if your avrdude build has support for the linuxgpio programmer compiled in,
#use -c?type on the command line and look for linuxgpio in the list. If it's not available
#you need pass the --enable-linuxgpio=yes option to configure and recompile avrdude.
#
programmer
id = "linuxgpio";
desc = "Use the Linux sysfs interface to bitbang GPIO lines";
type = "linuxgpio";
reset = 22;
sck = 27;
mosi = 24;
miso = 17;
;
# some ultra cheap programmers use bitbanging on the
# serialport.
#
# PC - DB9 - Pins for RS232:
#
# GND 5 -- |O
# | O| <- 9 RI
# DTR 4 <- |O |
# | O| <- 8 CTS
# TXD 3 <- |O |
# | O| -> 7 RTS
# RXD 2 -> |O |
# | O| <- 6 DSR
# DCD 1 -> |O
#
# Using RXD is currently not supported.
# Using RI is not supported under Win32 but is supported under Posix.
# serial ponyprog design (dasa2 in uisp)
# reset=!txd sck=rts mosi=dtr miso=cts
programmer
id = "ponyser";
desc = "design ponyprog serial, reset=!txd sck=rts mosi=dtr miso=cts";
type = "serbb";
connection_type = serial;
reset = ~3;
sck = 7;
mosi = 4;
miso = 8;
;
# Same as above, different name
# reset=!txd sck=rts mosi=dtr miso=cts
programmer parent "ponyser"
id = "siprog";
desc = "Lancos SI-Prog <http://www.lancos.com/siprogsch.html>";
;
# unknown (dasa in uisp)
# reset=rts sck=dtr mosi=txd miso=cts
programmer
id = "dasa";
desc = "serial port banging, reset=rts sck=dtr mosi=txd miso=cts";
type = "serbb";
connection_type = serial;
reset = 7;
sck = 4;
mosi = 3;
miso = 8;
;
# unknown (dasa3 in uisp)
# reset=!dtr sck=rts mosi=txd miso=cts
programmer
id = "dasa3";
desc = "serial port banging, reset=!dtr sck=rts mosi=txd miso=cts";
type = "serbb";
connection_type = serial;
reset = ~4;
sck = 7;
mosi = 3;
miso = 8;
;
# C2N232i (jumper configuration "auto")
# reset=dtr sck=!rts mosi=!txd miso=!cts
programmer
id = "c2n232i";
desc = "serial port banging, reset=dtr sck=!rts mosi=!txd miso=!cts";
type = "serbb";
connection_type = serial;
reset = 4;
sck = ~7;
mosi = ~3;
miso = ~8;
;
#
# PART DEFINITIONS
#
#------------------------------------------------------------
# ATtiny11
#------------------------------------------------------------
# This is an HVSP-only device.
part
id = "t11";
desc = "ATtiny11";
stk500_devcode = 0x11;
signature = 0x1e 0x90 0x04;
chip_erase_delay = 20000;
timeout = 200;
hvsp_controlstack =
0x4C, 0x0C, 0x1C, 0x2C, 0x3C, 0x64, 0x74, 0x00,
0x68, 0x78, 0x68, 0x68, 0x00, 0x00, 0x68, 0x78,
0x78, 0x00, 0x6D, 0x0C, 0x80, 0x40, 0x20, 0x10,
0x11, 0x08, 0x04, 0x02, 0x03, 0x08, 0x04, 0x00;
hventerstabdelay = 100;
progmodedelay = 0;
hvspcmdexedelay = 0;
synchcycles = 6;
latchcycles = 1;
togglevtg = 1;
poweroffdelay = 25;
resetdelayms = 0;
resetdelayus = 50;
hvleavestabdelay = 100;
resetdelay = 25;
chiperasepolltimeout = 40;
chiperasetime = 0;
programfusepolltimeout = 25;
programlockpolltimeout = 25;
memory "eeprom"
size = 64;
blocksize = 64;
readsize = 256;
delay = 5;
;
memory "flash"
size = 1024;
blocksize = 128;
readsize = 256;
delay = 3;
;
memory "signature"
size = 3;
;
memory "lock"
size = 1;
;
memory "calibration"
size = 1;
;
memory "fuse"
size = 1;
;
;
#------------------------------------------------------------
# ATtiny12
#------------------------------------------------------------
part
id = "t12";
desc = "ATtiny12";
stk500_devcode = 0x12;
avr910_devcode = 0x55;
signature = 0x1e 0x90 0x05;
chip_erase_delay = 20000;
pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1",
"x x x x x x x x x x x x x x x x";
chip_erase = "1 0 1 0 1 1 0 0 1 0 0 x x x x x",
"x x x x x x x x x x x x x x x x";
timeout = 200;
stabdelay = 100;
cmdexedelay = 25;
synchloops = 32;
bytedelay = 0;
pollindex = 3;
pollvalue = 0x53;
predelay = 1;
postdelay = 1;
pollmethod = 0;
hvsp_controlstack =
0x4C, 0x0C, 0x1C, 0x2C, 0x3C, 0x64, 0x74, 0x00,
0x68, 0x78, 0x68, 0x68, 0x00, 0x00, 0x68, 0x78,
0x78, 0x00, 0x6D, 0x0C, 0x80, 0x40, 0x20, 0x10,
0x11, 0x08, 0x04, 0x02, 0x03, 0x08, 0x04, 0x00;
hventerstabdelay = 100;
hvspcmdexedelay = 0;
synchcycles = 6;
latchcycles = 1;
togglevtg = 1;
poweroffdelay = 25;
resetdelayms = 0;
resetdelayus = 50;
hvleavestabdelay = 100;
resetdelay = 25;
chiperasepolltimeout = 40;
chiperasetime = 0;
programfusepolltimeout = 25;
programlockpolltimeout = 25;
memory "eeprom"
size = 64;
min_write_delay = 9000;
max_write_delay = 20000;
readback_p1 = 0xff;
readback_p2 = 0xff;
read = "1 0 1 0 0 0 0 0 x x x x x x x x",
"x x a5 a4 a3 a2 a1 a0 o o o o o o o o";
write = "1 1 0 0 0 0 0 0 x x x x x x x x",
"x x a5 a4 a3 a2 a1 a0 i i i i i i i i";
mode = 0x04;
delay = 8;
blocksize = 64;
readsize = 256;
;
memory "flash"
size = 1024;
min_write_delay = 4500;
max_write_delay = 20000;
readback_p1 = 0xff;
readback_p2 = 0xff;
read_lo = " 0 0 1 0 0 0 0 0",
" x x x x x x x a8",
" a7 a6 a5 a4 a3 a2 a1 a0",
" o o o o o o o o";
read_hi = " 0 0 1 0 1 0 0 0",
" x x x x x x x a8",
" a7 a6 a5 a4 a3 a2 a1 a0",
" o o o o o o o o";
write_lo = " 0 1 0 0 0 0 0 0",
" x x x x x x x a8",
" a7 a6 a5 a4 a3 a2 a1 a0",
" i i i i i i i i";
write_hi = " 0 1 0 0 1 0 0 0",
" x x x x x x x a8",
" a7 a6 a5 a4 a3 a2 a1 a0",
" i i i i i i i i";
mode = 0x04;
delay = 5;
blocksize = 128;
readsize = 256;
;
memory "signature"
size = 3;
read = "0 0 1 1 0 0 0 0 x x x x x x x x",
"0 0 0 0 0 0 a1 a0 o o o o o o o o";
;
memory "lock"
size = 1;
read = "0 1 0 1 1 0 0 0 x x x x x x x x",
"x x x x x x x x x x x x x o o x";
write = "1 0 1 0 1 1 0 0 1 1 1 1 1 i i 1",
"x x x x x x x x x x x x x x x x";
min_write_delay = 9000;
max_write_delay = 9000;
;
memory "calibration"
size = 1;
read = "0 0 1 1 1 0 0 0 x x x x x x x x",
"0 0 0 0 0 0 0 0 o o o o o o o o";
;
memory "fuse"
size = 1;
read = "0 1 0 1 0 0 0 0 x x x x x x x x",
"x x x x x x x x o o o o o o o o";
write = "1 0 1 0 1 1 0 0 1 0 1 x x x x x",
"x x x x x x x x i i i i i i i i";
min_write_delay = 9000;
max_write_delay = 9000;
;
;
#------------------------------------------------------------
# ATtiny13
#------------------------------------------------------------
part
id = "t13";
desc = "ATtiny13";
has_debugwire = yes;
flash_instr = 0xB4, 0x0E, 0x1E;
eeprom_instr = 0xBB, 0xFE, 0xBB, 0xEE, 0xBB, 0xCC, 0xB2, 0x0D,
0xBC, 0x0E, 0xB4, 0x0E, 0xBA, 0x0D, 0xBB, 0xBC,
0x99, 0xE1, 0xBB, 0xAC;
stk500_devcode = 0x14;
signature = 0x1e 0x90 0x07;
chip_erase_delay = 4000;
pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1",
"x x x x x x x x x x x x x x x x";
chip_erase = "1 0 1 0 1 1 0 0 1 0 0 x x x x x",
"x x x x x x x x x x x x x x x x";
timeout = 200;
stabdelay = 100;
cmdexedelay = 25;
synchloops = 32;
bytedelay = 0;
pollindex = 3;
pollvalue = 0x53;
predelay = 1;
postdelay = 1;
pollmethod = 1;
hvsp_controlstack =
0x4C, 0x0C, 0x1C, 0x2C, 0x3C, 0x64, 0x74, 0x66,
0x68, 0x78, 0x68, 0x68, 0x7A, 0x6A, 0x68, 0x78,
0x78, 0x7D, 0x6D, 0x0C, 0x80, 0x40, 0x20, 0x10,
0x11, 0x08, 0x04, 0x02, 0x03, 0x08, 0x04, 0x00;
hventerstabdelay = 100;
progmodedelay = 0;
hvspcmdexedelay = 0;
synchcycles = 6;
latchcycles = 1;
togglevtg = 1;
poweroffdelay = 25;
resetdelayms = 0;
resetdelayus = 90;
hvleavestabdelay = 100;
resetdelay = 25;
chiperasepolltimeout = 40;
chiperasetime = 0;
programfusepolltimeout = 25;
programlockpolltimeout = 25;
ocdrev = 0;
memory "eeprom"
size = 64;
page_size = 4;
min_write_delay = 4000;
max_write_delay = 4000;
readback_p1 = 0xff;
readback_p2 = 0xff;
read = "1 0 1 0 0 0 0 0 0 0 0 x x x x x",
"x x a5 a4 a3 a2 a1 a0 o o o o o o o o";
write = "1 1 0 0 0 0 0 0 0 0 0 x x x x x",
"x x a5 a4 a3 a2 a1 a0 i i i i i i i i";
loadpage_lo = " 1 1 0 0 0 0 0 1",
" 0 0 0 0 0 0 0 0",
" 0 0 0 0 0 0 a1 a0",
" i i i i i i i i";
writepage = " 1 1 0 0 0 0 1 0",
" 0 0 x x x x x x",
" x x a5 a4 a3 a2 0 0",
" x x x x x x x x";
mode = 0x41;
delay = 5;
blocksize = 4;
readsize = 256;
;
memory "flash"
paged = yes;
size = 1024;
page_size = 32;
num_pages = 32;
min_write_delay = 4500;
max_write_delay = 4500;
readback_p1 = 0xff;
readback_p2 = 0xff;
read_lo = " 0 0 1 0 0 0 0 0",
" 0 0 0 0 0 0 0 a8",
" a7 a6 a5 a4 a3 a2 a1 a0",
" o o o o o o o o";
read_hi = " 0 0 1 0 1 0 0 0",
" 0 0 0 0 0 0 0 a8",
" a7 a6 a5 a4 a3 a2 a1 a0",
" o o o o o o o o";
loadpage_lo = " 0 1 0 0 0 0 0 0",
" 0 0 0 x x x x x",
" x x x x a3 a2 a1 a0",
" i i i i i i i i";
loadpage_hi = " 0 1 0 0 1 0 0 0",
" 0 0 0 x x x x x",
" x x x x a3 a2 a1 a0",
" i i i i i i i i";
writepage = " 0 1 0 0 1 1 0 0",
" 0 0 0 0 0 0 0 a8",
" a7 a6 a5 a4 x x x x",
" x x x x x x x x";
mode = 0x41;
delay = 6;
blocksize = 32;
readsize = 256;
;
memory "signature"
size = 3;
read = "0 0 1 1 0 0 0 0 0 0 0 x x x x x",
"x x x x x x a1 a0 o o o o o o o o";
;
memory "lock"
size = 1;
min_write_delay = 4500;
max_write_delay = 4500;
read = "0 1 0 1 1 0 0 0 0 0 0 0 0 0 0 0",
"x x x x x x x x x x o o o o o o";
write = "1 0 1 0 1 1 0 0 1 1 1 x x x x x",
"x x x x x x x x 1 1 i i i i i i";
;
memory "calibration"
size = 2;
read = "0 0 1 1 1 0 0 0 0 0 0 x x x x x",
"0 0 0 0 0 0 0 a0 o o o o o o o o";
;
memory "lfuse"
size = 1;
min_write_delay = 4500;
max_write_delay = 4500;
write = "1 0 1 0 1 1 0 0 1 0 1 0 0 0 0 0",
"x x x x x x x x i i i i i i i i";
read = "0 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0",
"x x x x x x x x o o o o o o o o";
;
memory "hfuse"
size = 1;
min_write_delay = 4500;
max_write_delay = 4500;
write = "1 0 1 0 1 1 0 0 1 0 1 0 1 0 0 0",
"x x x x x x x x i i i i i i i i";
read = "0 1 0 1 1 0 0 0 0 0 0 0 1 0 0 0",
"x x x x x x x x o o o o o o o o";
;
;
#------------------------------------------------------------
# ATtiny15
#------------------------------------------------------------
part
id = "t15";
desc = "ATtiny15";
stk500_devcode = 0x13;
avr910_devcode = 0x56;
signature = 0x1e 0x90 0x06;
chip_erase_delay = 8200;
pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1",
"x x x x x x x x x x x x x x x x";
chip_erase = "1 0 1 0 1 1 0 0 1 0 0 x x x x x",
"x x x x x x x x x x x x x x x x";
timeout = 200;
stabdelay = 100;
cmdexedelay = 25;
synchloops = 32;
bytedelay = 0;
pollindex = 3;
pollvalue = 0x53;
predelay = 1;
postdelay = 1;
pollmethod = 0;
hvsp_controlstack =
0x4C, 0x0C, 0x1C, 0x2C, 0x3C, 0x64, 0x74, 0x00,
0x68, 0x78, 0x68, 0x68, 0x00, 0x00, 0x68, 0x78,
0x78, 0x00, 0x6D, 0x0C, 0x80, 0x40, 0x20, 0x10,
0x11, 0x08, 0x04, 0x02, 0x03, 0x08, 0x04, 0x00;
hventerstabdelay = 100;
hvspcmdexedelay = 5;
synchcycles = 6;
latchcycles = 16;
togglevtg = 1;
poweroffdelay = 25;
resetdelayms = 0;
resetdelayus = 50;
hvleavestabdelay = 100;
resetdelay = 25;
chiperasepolltimeout = 40;
chiperasetime = 0;
programfusepolltimeout = 25;
programlockpolltimeout = 25;
memory "eeprom"
size = 64;
min_write_delay = 8200;
max_write_delay = 8200;
readback_p1 = 0xff;
readback_p2 = 0xff;
read = "1 0 1 0 0 0 0 0 x x x x x x x x",
"x x a5 a4 a3 a2 a1 a0 o o o o o o o o";
write = "1 1 0 0 0 0 0 0 x x x x x x x x",
"x x a5 a4 a3 a2 a1 a0 i i i i i i i i";
mode = 0x04;
delay = 10;
blocksize = 64;
readsize = 256;
;
memory "flash"
size = 1024;
min_write_delay = 4100;
max_write_delay = 4100;
readback_p1 = 0xff;
readback_p2 = 0xff;
read_lo = " 0 0 1 0 0 0 0 0",
" x x x x x x x a8",
" a7 a6 a5 a4 a3 a2 a1 a0",
" o o o o o o o o";
read_hi = " 0 0 1 0 1 0 0 0",
" x x x x x x x a8",
" a7 a6 a5 a4 a3 a2 a1 a0",
" o o o o o o o o";
write_lo = " 0 1 0 0 0 0 0 0",
" x x x x x x x a8",
" a7 a6 a5 a4 a3 a2 a1 a0",
" i i i i i i i i";
write_hi = " 0 1 0 0 1 0 0 0",
" x x x x x x x a8",
" a7 a6 a5 a4 a3 a2 a1 a0",
" i i i i i i i i";
mode = 0x04;
delay = 5;
blocksize = 128;
readsize = 256;
;
memory "signature"
size = 3;
read = "0 0 1 1 0 0 0 0 x x x x x x x x",
"0 0 0 0 0 0 a1 a0 o o o o o o o o";
;
memory "lock"
size = 1;
read = "0 1 0 1 1 0 0 0 x x x x x x x x",
"x x x x x x x x x x x x x o o x";
write = "1 0 1 0 1 1 0 0 1 1 1 1 1 i i 1",
"x x x x x x x x x x x x x x x x";
min_write_delay = 9000;
max_write_delay = 9000;
;
memory "calibration"
size = 1;
read = "0 0 1 1 1 0 0 0 x x x x x x x x",
"0 0 0 0 0 0 0 0 o o o o o o o o";
;
memory "fuse"
size = 1;
read = "0 1 0 1 0 0 0 0 x x x x x x x x",
"x x x x x x x x o o o o x x o o";
write = "1 0 1 0 1 1 0 0 1 0 1 x x x x x",
"x x x x x x x x i i i i 1 1 i i";
min_write_delay = 9000;
max_write_delay = 9000;
;
;
#------------------------------------------------------------
# AT90s1200
#------------------------------------------------------------
part
id = "1200";
desc = "AT90S1200";
is_at90s1200 = yes;
stk500_devcode = 0x33;
avr910_devcode = 0x13;
signature = 0x1e 0x90 0x01;
pagel = 0xd7;
bs2 = 0xa0;
chip_erase_delay = 20000;
pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1",
"x x x x x x x x x x x x x x x x";
chip_erase = "1 0 1 0 1 1 0 0 1 0 0 0 0 0 0 0",
"x x x x x x x x x x x x x x x x";
timeout = 200;
stabdelay = 100;
cmdexedelay = 25;
synchloops = 1;
bytedelay = 0;
pollindex = 0;
pollvalue = 0xFF;
predelay = 1;
postdelay = 1;
pollmethod = 0;
pp_controlstack =
0x0E, 0x1E, 0x0F, 0x1F, 0x2E, 0x3E, 0x2F, 0x3F,
0x4E, 0x5E, 0x4F, 0x5F, 0x6E, 0x7E, 0x6F, 0x7F,
0x66, 0x76, 0x67, 0x77, 0x6A, 0x7A, 0x6B, 0x7B,
0xBE, 0xFD, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00;
hventerstabdelay = 100;
progmodedelay = 0;
latchcycles = 0;
togglevtg = 0;
poweroffdelay = 0;
resetdelayms = 0;
resetdelayus = 0;
hvleavestabdelay = 15;
chiperasepulsewidth = 15;
chiperasepolltimeout = 0;
programfusepulsewidth = 2;
programfusepolltimeout = 0;
programlockpulsewidth = 0;
programlockpolltimeout = 1;
memory "eeprom"
size = 64;
min_write_delay = 4000;
max_write_delay = 9000;
readback_p1 = 0x00;
readback_p2 = 0xff;
read = "1 0 1 0 0 0 0 0 x x x x x x x x",
"x x a5 a4 a3 a2 a1 a0 o o o o o o o o";
write = "1 1 0 0 0 0 0 0 x x x x x x x x",
"x x a5 a4 a3 a2 a1 a0 i i i i i i i i";
mode = 0x04;
delay = 20;
blocksize = 32;
readsize = 256;
;
memory "flash"
size = 1024;
min_write_delay = 4000;
max_write_delay = 9000;
readback_p1 = 0xff;
readback_p2 = 0xff;
read_lo = " 0 0 1 0 0 0 0 0",
" x x x x x x x a8",
" a7 a6 a5 a4 a3 a2 a1 a0",
" o o o o o o o o";
read_hi = " 0 0 1 0 1 0 0 0",
" x x x x x x x a8",
" a7 a6 a5 a4 a3 a2 a1 a0",
" o o o o o o o o";
write_lo = " 0 1 0 0 0 0 0 0",
" x x x x x x x a8",
" a7 a6 a5 a4 a3 a2 a1 a0",
" i i i i i i i i";
write_hi = " 0 1 0 0 1 0 0 0",
" x x x x x x x a8",
" a7 a6 a5 a4 a3 a2 a1 a0",
" i i i i i i i i";
mode = 0x02;
delay = 15;
blocksize = 128;
readsize = 256;
;
memory "signature"
size = 3;
read = "0 0 1 1 0 0 0 0 x x x x x x x x",
"x x x x x x a1 a0 o o o o o o o o";
;
memory "fuse"
size = 1;
;
memory "lock"
size = 1;
min_write_delay = 9000;
max_write_delay = 20000;
write = "1 0 1 0 1 1 0 0 1 1 1 1 1 i i 1",
"x x x x x x x x x x x x x x x x";
;
;
#------------------------------------------------------------
# AT90s4414
#------------------------------------------------------------
part
id = "4414";
desc = "AT90S4414";
stk500_devcode = 0x50;
avr910_devcode = 0x28;
signature = 0x1e 0x92 0x01;
chip_erase_delay = 20000;
pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1",
"x x x x x x x x x x x x x x x x";
chip_erase = "1 0 1 0 1 1 0 0 1 0 0 0 0 0 0 0",
"x x x x x x x x x x x x x x x x";
timeout = 200;
stabdelay = 100;
cmdexedelay = 25;
synchloops = 32;
bytedelay = 0;
pollindex = 3;
pollvalue = 0x53;
predelay = 1;
postdelay = 1;
pollmethod = 0;
pp_controlstack =
0x0E, 0x1E, 0x0F, 0x1F, 0x2E, 0x3E, 0x2F, 0x3F,
0x4E, 0x5E, 0x4F, 0x5F, 0x6E, 0x7E, 0x6F, 0x7F,
0x66, 0x76, 0x67, 0x77, 0x6A, 0x7A, 0x6B, 0x7B,
0xBE, 0xFD, 0x00, 0x01, 0x00, 0x00, 0x00, 0x01;
hventerstabdelay = 100;
progmodedelay = 0;
latchcycles = 0;
togglevtg = 0;
poweroffdelay = 0;
resetdelayms = 0;
resetdelayus = 0;
hvleavestabdelay = 15;
chiperasepulsewidth = 15;
chiperasepolltimeout = 0;
programfusepulsewidth = 2;
programfusepolltimeout = 0;
programlockpulsewidth = 0;
programlockpolltimeout = 1;
memory "eeprom"
size = 256;
min_write_delay = 9000;
max_write_delay = 20000;
readback_p1 = 0x80;
readback_p2 = 0x7f;
read = " 1 0 1 0 0 0 0 0 x x x x x x x a8",
"a7 a6 a5 a4 a3 a2 a1 a0 o o o o o o o o";
write = " 1 1 0 0 0 0 0 0 x x x x x x x a8",
"a7 a6 a5 a4 a3 a2 a1 a0 i i i i i i i i";
mode = 0x04;
delay = 12;
blocksize = 64;
readsize = 256;
;
memory "flash"
size = 4096;
min_write_delay = 9000;
max_write_delay = 20000;
readback_p1 = 0x7f;
readback_p2 = 0x7f;
read_lo = " 0 0 1 0 0 0 0 0",
" x x x x a11 a10 a9 a8",
" a7 a6 a5 a4 a3 a2 a1 a0",
" o o o o o o o o";
read_hi = " 0 0 1 0 1 0 0 0",
" x x x x a11 a10 a9 a8",
" a7 a6 a5 a4 a3 a2 a1 a0",
" o o o o o o o o";
write_lo = " 0 1 0 0 0 0 0 0",
" x x x x a11 a10 a9 a8",
" a7 a6 a5 a4 a3 a2 a1 a0",
" i i i i i i i i";
write_hi = " 0 1 0 0 1 0 0 0",
" x x x x a11 a10 a9 a8",
" a7 a6 a5 a4 a3 a2 a1 a0",
" i i i i i i i i";
mode = 0x04;
delay = 12;
blocksize = 64;
readsize = 256;
;
memory "signature"
size = 3;
read = "0 0 1 1 0 0 0 0 x x x x x x x x",
"x x x x x x a1 a0 o o o o o o o o";
;
memory "fuse"
size = 1;
;
memory "lock"
size = 1;
write = "1 0 1 0 1 1 0 0 1 1 1 1 1 i i 1",
"x x x x x x x x x x x x x x x x";
min_write_delay = 9000;
max_write_delay = 9000;
;
;
#------------------------------------------------------------
# AT90s2313
#------------------------------------------------------------
part
id = "2313";
desc = "AT90S2313";
stk500_devcode = 0x40;
avr910_devcode = 0x20;
signature = 0x1e 0x91 0x01;
chip_erase_delay = 20000;
pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1",
"x x x x x x x x x x x x x x x x";
chip_erase = "1 0 1 0 1 1 0 0 1 0 0 0 0 0 0 0",
"x x x x x x x x x x x x x x x x";
timeout = 200;
stabdelay = 100;
cmdexedelay = 25;
synchloops = 32;
bytedelay = 0;
pollindex = 3;
pollvalue = 0x53;
predelay = 1;
postdelay = 1;
pollmethod = 0;
pp_controlstack =
0x0E, 0x1E, 0x0F, 0x1F, 0x2E, 0x3E, 0x2F, 0x3F,
0x4E, 0x5E, 0x4F, 0x5F, 0x6E, 0x7E, 0x6F, 0x7F,
0x66, 0x76, 0x67, 0x77, 0x6A, 0x7A, 0x6B, 0x7B,
0xBE, 0xFD, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00;
hventerstabdelay = 100;
progmodedelay = 0;
latchcycles = 0;
togglevtg = 0;
poweroffdelay = 0;
resetdelayms = 0;
resetdelayus = 0;
hvleavestabdelay = 15;
chiperasepulsewidth = 15;
chiperasepolltimeout = 0;
programfusepulsewidth = 2;
programfusepolltimeout = 0;
programlockpulsewidth = 0;
programlockpolltimeout = 1;
memory "eeprom"
size = 128;
min_write_delay = 4000;
max_write_delay = 9000;
readback_p1 = 0x80;
readback_p2 = 0x7f;
read = "1 0 1 0 0 0 0 0 x x x x x x x x",
"x a6 a5 a4 a3 a2 a1 a0 o o o o o o o o";
write = "1 1 0 0 0 0 0 0 x x x x x x x x",
"x a6 a5 a4 a3 a2 a1 a0 i i i i i i i i";
mode = 0x04;
delay = 12;
blocksize = 64;
readsize = 256;
;
memory "flash"
size = 2048;
min_write_delay = 4000;
max_write_delay = 9000;
readback_p1 = 0x7f;
readback_p2 = 0x7f;
read_lo = " 0 0 1 0 0 0 0 0",
" x x x x x x a9 a8",
" a7 a6 a5 a4 a3 a2 a1 a0",
" o o o o o o o o";
read_hi = " 0 0 1 0 1 0 0 0",
" x x x x x x a9 a8",
" a7 a6 a5 a4 a3 a2 a1 a0",
" o o o o o o o o";
write_lo = " 0 1 0 0 0 0 0 0",
" x x x x x x a9 a8",
" a7 a6 a5 a4 a3 a2 a1 a0",
" i i i i i i i i";
write_hi = " 0 1 0 0 1 0 0 0",
" x x x x x x a9 a8",
" a7 a6 a5 a4 a3 a2 a1 a0",
" i i i i i i i i";
mode = 0x04;
delay = 12;
blocksize = 128;
readsize = 256;
;
memory "signature"
size = 3;
read = "0 0 1 1 0 0 0 0 x x x x x x x x",
"x x x x x x a1 a0 o o o o o o o o";
;
memory "fuse"
size = 1;
;
memory "lock"
size = 1;
write = "1 0 1 0 1 1 0 0 1 1 1 x x i i x",
"x x x x x x x x x x x x x x x x";
min_write_delay = 9000;
max_write_delay = 9000;
;
;
#------------------------------------------------------------
# AT90s2333
#------------------------------------------------------------
part
id = "2333";
##### WARNING: No XML file for device 'AT90S2333'! #####
desc = "AT90S2333";
stk500_devcode = 0x42;
avr910_devcode = 0x34;
signature = 0x1e 0x91 0x05;
chip_erase_delay = 20000;
pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1",
"x x x x x x x x x x x x x x x x";
chip_erase = "1 0 1 0 1 1 0 0 1 0 0 0 0 0 0 0",
"x x x x x x x x x x x x x x x x";
timeout = 200;
stabdelay = 100;
cmdexedelay = 25;
synchloops = 32;
bytedelay = 0;
pollindex = 3;
pollvalue = 0x53;
predelay = 1;
postdelay = 1;
pollmethod = 0;
pp_controlstack =
0x0E, 0x1E, 0x0F, 0x1F, 0x2E, 0x3E, 0x2F, 0x3F,
0x4E, 0x5E, 0x4F, 0x5F, 0x6E, 0x7E, 0x6F, 0x7F,
0x66, 0x76, 0x67, 0x77, 0x6A, 0x7A, 0x6B, 0x7B,
0xBE, 0xFD, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00;
hventerstabdelay = 100;
progmodedelay = 0;
latchcycles = 0;
togglevtg = 0;
poweroffdelay = 0;
resetdelayms = 0;
resetdelayus = 0;
hvleavestabdelay = 15;
chiperasepulsewidth = 15;
chiperasepolltimeout = 0;
programfusepulsewidth = 2;
programfusepolltimeout = 0;
programlockpulsewidth = 0;
programlockpolltimeout = 1;
memory "eeprom"
size = 128;
min_write_delay = 9000;
max_write_delay = 20000;
readback_p1 = 0x00;
readback_p2 = 0xff;
read = "1 0 1 0 0 0 0 0 x x x x x x x x",
"x a6 a5 a4 a3 a2 a1 a0 o o o o o o o o";
write = "1 1 0 0 0 0 0 0 x x x x x x x x",
"x a6 a5 a4 a3 a2 a1 a0 i i i i i i i i";
mode = 0x04;
delay = 12;
blocksize = 128;
readsize = 256;
;
memory "flash"
size = 2048;
min_write_delay = 9000;
max_write_delay = 20000;
readback_p1 = 0xff;
readback_p2 = 0xff;
read_lo = " 0 0 1 0 0 0 0 0",
" x x x x x x a9 a8",
" a7 a6 a5 a4 a3 a2 a1 a0",
" o o o o o o o o";
read_hi = " 0 0 1 0 1 0 0 0",
" x x x x x x a9 a8",
" a7 a6 a5 a4 a3 a2 a1 a0",
" o o o o o o o o";
write_lo = " 0 1 0 0 0 0 0 0",
" x x x x x x a9 a8",
" a7 a6 a5 a4 a3 a2 a1 a0",
" i i i i i i i i";
write_hi = " 0 1 0 0 1 0 0 0",
" x x x x x x a9 a8",
" a7 a6 a5 a4 a3 a2 a1 a0",
" i i i i i i i i";
mode = 0x04;
delay = 12;
blocksize = 128;
readsize = 256;
;
memory "signature"
size = 3;
read = "0 0 1 1 0 0 0 0 x x x x x x x x",
"x x x x x x a1 a0 o o o o o o o o";
;
memory "fuse"
size = 1;
min_write_delay = 9000;
max_write_delay = 20000;
pwroff_after_write = yes;
read = "0 1 0 1 0 0 0 0 x x x x x x x x",
"x x x x x x x x x x o o o o o o";
write = "1 0 1 0 1 1 0 0 1 0 1 i i i i i",
"x x x x x x x x x x x x x x x x";
;
memory "lock"
size = 1;
min_write_delay = 9000;
max_write_delay = 20000;
read = "0 1 0 1 1 0 0 0 x x x x x x x x",
"x x x x x x x x x x x x x o o x";
write = "1 0 1 0 1 1 0 0 1 1 1 1 1 i i 1",
"x x x x x x x x x x x x x x x x";
;
;
#------------------------------------------------------------
# AT90s2343 (also AT90s2323 and ATtiny22)
#------------------------------------------------------------
part
id = "2343";
desc = "AT90S2343";
stk500_devcode = 0x43;
avr910_devcode = 0x4c;
signature = 0x1e 0x91 0x03;
chip_erase_delay = 18000;
pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1",
"x x x x x x x x x x x x x x x x";
chip_erase = "1 0 1 0 1 1 0 0 1 0 0 x x x x x",
"x x x x x x x x x x x x x x x x";
timeout = 200;
stabdelay = 100;
cmdexedelay = 25;
synchloops = 32;
bytedelay = 0;
pollindex = 3;
pollvalue = 0x53;
predelay = 1;
postdelay = 1;
pollmethod = 0;
hvsp_controlstack =
0x4C, 0x0C, 0x1C, 0x2C, 0x3C, 0x64, 0x74, 0x00,
0x68, 0x78, 0x68, 0x68, 0x00, 0x00, 0x68, 0x78,
0x78, 0x00, 0x6D, 0x0C, 0x80, 0x40, 0x20, 0x10,
0x11, 0x08, 0x04, 0x02, 0x03, 0x08, 0x04, 0x00;
hventerstabdelay = 100;
hvspcmdexedelay = 0;
synchcycles = 6;
latchcycles = 1;
togglevtg = 0;
poweroffdelay = 25;
resetdelayms = 0;
resetdelayus = 50;
hvleavestabdelay = 100;
resetdelay = 25;
chiperasepolltimeout = 40;
chiperasetime = 0;
programfusepolltimeout = 25;
programlockpolltimeout = 25;
memory "eeprom"
size = 128;
min_write_delay = 9000;
max_write_delay = 20000;
readback_p1 = 0x00;
readback_p2 = 0xff;
read = "1 0 1 0 0 0 0 0 0 0 0 0 0 0 0 0",
"x a6 a5 a4 a3 a2 a1 a0 o o o o o o o o";
write = "1 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0",
"x a6 a5 a4 a3 a2 a1 a0 i i i i i i i i";
mode = 0x04;
delay = 12;
blocksize = 64;
readsize = 256;
;
memory "flash"
size = 2048;
min_write_delay = 9000;
max_write_delay = 20000;
readback_p1 = 0xff;
readback_p2 = 0xff;
read_lo = " 0 0 1 0 0 0 0 0",
" x x x x x x a9 a8",
" a7 a6 a5 a4 a3 a2 a1 a0",
" o o o o o o o o";
read_hi = " 0 0 1 0 1 0 0 0",
" x x x x x x a9 a8",
" a7 a6 a5 a4 a3 a2 a1 a0",
" o o o o o o o o";
write_lo = " 0 1 0 0 0 0 0 0",
" x x x x x x a9 a8",
" a7 a6 a5 a4 a3 a2 a1 a0",
" i i i i i i i i";
write_hi = " 0 1 0 0 1 0 0 0",
" x x x x x x a9 a8",
" a7 a6 a5 a4 a3 a2 a1 a0",
" i i i i i i i i";
mode = 0x04;
delay = 12;
blocksize = 128;
readsize = 128;
;
memory "signature"
size = 3;
read = "0 0 1 1 0 0 0 0 x x x x x x x x",
"x x x x x x a1 a0 o o o o o o o o";
;
memory "fuse"
size = 1;
min_write_delay = 9000;
max_write_delay = 20000;
read = "0 1 0 1 1 0 0 0 x x x x x x x x",
"x x x x x x x x o o o x x x x o";
write = "1 0 1 0 1 1 0 0 1 0 1 1 1 1 1 i",
"x x x x x x x x x x x x x x x x";
;
memory "lock"
size = 1;
min_write_delay = 9000;
max_write_delay = 20000;
read = "0 1 0 1 1 0 0 0 x x x x x x x x",
"x x x x x x x x o o o x x x x o";
write = "1 0 1 0 1 1 0 0 1 1 1 1 1 i i 1",
"x x x x x x x x x x x x x x x x";
;
;
#------------------------------------------------------------
# AT90s4433
#------------------------------------------------------------
part
id = "4433";
desc = "AT90S4433";
stk500_devcode = 0x51;
avr910_devcode = 0x30;
signature = 0x1e 0x92 0x03;
chip_erase_delay = 20000;
pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1",
"x x x x x x x x x x x x x x x x";
chip_erase = "1 0 1 0 1 1 0 0 1 0 0 0 0 0 0 0",
"x x x x x x x x x x x x x x x x";
timeout = 200;
stabdelay = 100;
cmdexedelay = 25;
synchloops = 32;
bytedelay = 0;
pollindex = 3;
pollvalue = 0x53;
predelay = 1;
postdelay = 1;
pollmethod = 0;
pp_controlstack =
0x0E, 0x1E, 0x0F, 0x1F, 0x2E, 0x3E, 0x2F, 0x3F,
0x4E, 0x5E, 0x4F, 0x5F, 0x6E, 0x7E, 0x6F, 0x7F,
0x66, 0x76, 0x67, 0x77, 0x6A, 0x7A, 0x6B, 0x7B,
0xBE, 0xFD, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00;
hventerstabdelay = 100;
progmodedelay = 0;
latchcycles = 0;
togglevtg = 0;
poweroffdelay = 0;
resetdelayms = 0;
resetdelayus = 0;
hvleavestabdelay = 15;
chiperasepulsewidth = 15;
chiperasepolltimeout = 0;
programfusepulsewidth = 2;
programfusepolltimeout = 0;
programlockpulsewidth = 0;
programlockpolltimeout = 1;
memory "eeprom"
size = 256;
min_write_delay = 9000;
max_write_delay = 20000;
readback_p1 = 0x00;
readback_p2 = 0xff;
read = " 1 0 1 0 0 0 0 0 x x x x x x x x",
"a7 a6 a5 a4 a3 a2 a1 a0 o o o o o o o o";
write = " 1 1 0 0 0 0 0 0 x x x x x x x x",
"a7 a6 a5 a4 a3 a2 a1 a0 i i i i i i i i";
mode = 0x04;
delay = 12;
blocksize = 128;
readsize = 256;
;
memory "flash"
size = 4096;
min_write_delay = 9000;
max_write_delay = 20000;
readback_p1 = 0xff;
readback_p2 = 0xff;
read_lo = " 0 0 1 0 0 0 0 0",
" x x x x x a10 a9 a8",
" a7 a6 a5 a4 a3 a2 a1 a0",
" o o o o o o o o";
read_hi = " 0 0 1 0 1 0 0 0",
" x x x x x a10 a9 a8",
" a7 a6 a5 a4 a3 a2 a1 a0",
" o o o o o o o o";
write_lo = " 0 1 0 0 0 0 0 0",
" x x x x x a10 a9 a8",
" a7 a6 a5 a4 a3 a2 a1 a0",
" i i i i i i i i";
write_hi = " 0 1 0 0 1 0 0 0",
" x x x x x a10 a9 a8",
" a7 a6 a5 a4 a3 a2 a1 a0",
" i i i i i i i i";
mode = 0x04;
delay = 12;
blocksize = 128;
readsize = 256;
;
memory "signature"
size = 3;
read = "0 0 1 1 0 0 0 0 x x x x x x x x",
"x x x x x x a1 a0 o o o o o o o o";
;
memory "fuse"
size = 1;
min_write_delay = 9000;
max_write_delay = 20000;
pwroff_after_write = yes;
read = "0 1 0 1 0 0 0 0 x x x x x x x x",
"x x x x x x x x x x o o o o o o";
write = "1 0 1 0 1 1 0 0 1 0 1 i i i i i",
"x x x x x x x x x x x x x x x x";
;
memory "lock"
size = 1;
min_write_delay = 9000;
max_write_delay = 20000;
read = "0 1 0 1 1 0 0 0 x x x x x x x x",
"x x x x x x x x x x x x x o o x";
write = "1 0 1 0 1 1 0 0 1 1 1 1 1 i i 1",
"x x x x x x x x x x x x x x x x";
;
;
#------------------------------------------------------------
# AT90s4434
#------------------------------------------------------------
part
id = "4434";
##### WARNING: No XML file for device 'AT90S4434'! #####
desc = "AT90S4434";
stk500_devcode = 0x52;
avr910_devcode = 0x6c;
signature = 0x1e 0x92 0x02;
chip_erase_delay = 20000;
pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1",
"x x x x x x x x x x x x x x x x";
chip_erase = "1 0 1 0 1 1 0 0 1 0 0 0 0 0 0 0",
"x x x x x x x x x x x x x x x x";
memory "eeprom"
size = 256;
min_write_delay = 9000;
max_write_delay = 20000;
readback_p1 = 0x00;
readback_p2 = 0xff;
read = " 1 0 1 0 0 0 0 0 x x x x x x x x",
"a7 a6 a5 a4 a3 a2 a1 a0 o o o o o o o o";
write = " 1 1 0 0 0 0 0 0 x x x x x x x x",
"a7 a6 a5 a4 a3 a2 a1 a0 i i i i i i i i";
;
memory "flash"
size = 4096;
min_write_delay = 9000;
max_write_delay = 20000;
readback_p1 = 0xff;
readback_p2 = 0xff;
read_lo = " 0 0 1 0 0 0 0 0",
" x x x x x a10 a9 a8",
" a7 a6 a5 a4 a3 a2 a1 a0",
" o o o o o o o o";
read_hi = " 0 0 1 0 1 0 0 0",
" x x x x x a10 a9 a8",
" a7 a6 a5 a4 a3 a2 a1 a0",
" o o o o o o o o";
write_lo = " 0 1 0 0 0 0 0 0",
" x x x x x a10 a9 a8",
" a7 a6 a5 a4 a3 a2 a1 a0",
" i i i i i i i i";
write_hi = " 0 1 0 0 1 0 0 0",
" x x x x x a10 a9 a8",
" a7 a6 a5 a4 a3 a2 a1 a0",
" i i i i i i i i";
;
memory "signature"
size = 3;
read = "0 0 1 1 0 0 0 0 x x x x x x x x",
"x x x x x x a1 a0 o o o o o o o o";
;
memory "fuse"
size = 1;
min_write_delay = 9000;
max_write_delay = 20000;
read = "0 1 0 1 0 0 0 0 x x x x x x x x",
"x x x x x x x x x x o o o o o o";
write = "1 0 1 0 1 1 0 0 1 0 1 i i i i i",
"x x x x x x x x x x x x x x x x";
;
memory "lock"
size = 1;
min_write_delay = 9000;
max_write_delay = 20000;
read = "0 1 0 1 1 0 0 0 x x x x x x x x",
"x x x x x x x x x x x x x o o x";
write = "1 0 1 0 1 1 0 0 1 1 1 1 1 i i 1",
"x x x x x x x x x x x x x x x x";
;
;
#------------------------------------------------------------
# AT90s8515
#------------------------------------------------------------
part
id = "8515";
desc = "AT90S8515";
stk500_devcode = 0x60;
avr910_devcode = 0x38;
signature = 0x1e 0x93 0x01;
chip_erase_delay = 20000;
pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1",
"x x x x x x x x x x x x x x x x";
chip_erase = "1 0 1 0 1 1 0 0 1 0 0 x x x x x",
"x x x x x x x x x x x x x x x x";
timeout = 200;
stabdelay = 100;
cmdexedelay = 25;
synchloops = 32;
bytedelay = 0;
pollindex = 3;
pollvalue = 0x53;
predelay = 1;
postdelay = 1;
pollmethod = 0;
pp_controlstack =
0x0E, 0x1E, 0x0F, 0x1F, 0x2E, 0x3E, 0x2F, 0x3F,
0x4E, 0x5E, 0x4F, 0x5F, 0x6E, 0x7E, 0x6F, 0x7F,
0x66, 0x76, 0x67, 0x77, 0x6A, 0x7A, 0x6B, 0x7B,
0xBE, 0xFD, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00;
hventerstabdelay = 100;
progmodedelay = 0;
latchcycles = 0;
togglevtg = 0;
poweroffdelay = 0;
resetdelayms = 0;
resetdelayus = 0;
hvleavestabdelay = 15;
resetdelay = 15;
chiperasepulsewidth = 15;
chiperasepolltimeout = 0;
programfusepulsewidth = 2;
programfusepolltimeout = 0;
programlockpulsewidth = 0;
programlockpolltimeout = 1;
memory "eeprom"
size = 512;
min_write_delay = 4000;
max_write_delay = 9000;
readback_p1 = 0x80;
readback_p2 = 0x7f;
read = " 1 0 1 0 0 0 0 0 x x x x x x x a8",
"a7 a6 a5 a4 a3 a2 a1 a0 o o o o o o o o";
write = " 1 1 0 0 0 0 0 0 x x x x x x x a8",
"a7 a6 a5 a4 a3 a2 a1 a0 i i i i i i i i";
mode = 0x04;
delay = 12;
blocksize = 128;
readsize = 256;
;
memory "flash"
size = 8192;
min_write_delay = 4000;
max_write_delay = 9000;
readback_p1 = 0x7f;
readback_p2 = 0x7f;
read_lo = " 0 0 1 0 0 0 0 0",
" x x x x a11 a10 a9 a8",
" a7 a6 a5 a4 a3 a2 a1 a0",
" o o o o o o o o";
read_hi = " 0 0 1 0 1 0 0 0",
" x x x x a11 a10 a9 a8",
" a7 a6 a5 a4 a3 a2 a1 a0",
" o o o o o o o o";
write_lo = " 0 1 0 0 0 0 0 0",
" x x x x a11 a10 a9 a8",
" a7 a6 a5 a4 a3 a2 a1 a0",
" i i i i i i i i";
write_hi = " 0 1 0 0 1 0 0 0",
" x x x x a11 a10 a9 a8",
" a7 a6 a5 a4 a3 a2 a1 a0",
" i i i i i i i i";
mode = 0x04;
delay = 12;
blocksize = 128;
readsize = 256;
;
memory "signature"
size = 3;
read = "0 0 1 1 0 0 0 0 x x x x x x x x",
"x x x x x x a1 a0 o o o o o o o o";
;
memory "fuse"
size = 1;
;
memory "lock"
size = 1;
write = "1 0 1 0 1 1 0 0 1 1 1 1 1 i i 1",
"x x x x x x x x x x x x x x x x";
min_write_delay = 9000;
max_write_delay = 9000;
;
;
#------------------------------------------------------------
# AT90s8535
#------------------------------------------------------------
part
id = "8535";
desc = "AT90S8535";
stk500_devcode = 0x61;
avr910_devcode = 0x68;
signature = 0x1e 0x93 0x03;
chip_erase_delay = 20000;
pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1",
"x x x x x x x x x x x x x x x x";
chip_erase = "1 0 1 0 1 1 0 0 1 0 0 0 0 0 0 0",
"x x x x x x x x x x x x x x x x";
timeout = 200;
stabdelay = 100;
cmdexedelay = 25;
synchloops = 32;
bytedelay = 0;
pollindex = 3;
pollvalue = 0x53;
predelay = 1;
postdelay = 1;
pollmethod = 0;
pp_controlstack =
0x0E, 0x1E, 0x0F, 0x1F, 0x2E, 0x3E, 0x2F, 0x3F,
0x4E, 0x5E, 0x4F, 0x5F, 0x6E, 0x7E, 0x6F, 0x7F,
0x66, 0x76, 0x67, 0x77, 0x6A, 0x7A, 0x6B, 0x7B,
0xBE, 0xFD, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00;
hventerstabdelay = 100;
progmodedelay = 0;
latchcycles = 0;
togglevtg = 0;
poweroffdelay = 0;
resetdelayms = 0;
resetdelayus = 0;
hvleavestabdelay = 15;
chiperasepulsewidth = 15;
chiperasepolltimeout = 0;
programfusepulsewidth = 2;
programfusepolltimeout = 0;
programlockpulsewidth = 0;
programlockpolltimeout = 1;
memory "eeprom"
size = 512;
min_write_delay = 9000;
max_write_delay = 20000;
readback_p1 = 0x00;
readback_p2 = 0xff;
read = " 1 0 1 0 0 0 0 0 x x x x x x x a8",
"a7 a6 a5 a4 a3 a2 a1 a0 o o o o o o o o";
write = " 1 1 0 0 0 0 0 0 x x x x x x x a8",
"a7 a6 a5 a4 a3 a2 a1 a0 i i i i i i i i";
mode = 0x04;
delay = 12;
blocksize = 128;
readsize = 256;
;
memory "flash"
size = 8192;
min_write_delay = 9000;
max_write_delay = 20000;
readback_p1 = 0xff;
readback_p2 = 0xff;
read_lo = " 0 0 1 0 0 0 0 0",
" x x x x a11 a10 a9 a8",
" a7 a6 a5 a4 a3 a2 a1 a0",
" o o o o o o o o";
read_hi = " 0 0 1 0 1 0 0 0",
" x x x x a11 a10 a9 a8",
" a7 a6 a5 a4 a3 a2 a1 a0",
" o o o o o o o o";
write_lo = " 0 1 0 0 0 0 0 0",
" x x x x a11 a10 a9 a8",
" a7 a6 a5 a4 a3 a2 a1 a0",
" i i i i i i i i";
write_hi = " 0 1 0 0 1 0 0 0",
" x x x x a11 a10 a9 a8",
" a7 a6 a5 a4 a3 a2 a1 a0",
" i i i i i i i i";
mode = 0x04;
delay = 12;
blocksize = 128;
readsize = 256;
;
memory "signature"
size = 3;
read = "0 0 1 1 0 0 0 0 x x x x x x x x",
"x x x x x x a1 a0 o o o o o o o o";
;
memory "fuse"
size = 1;
read = "0 1 0 1 1 0 0 0 x x x x x x x x",
"x x x x x x x x x x x x x x x o";
write = "1 0 1 0 1 1 0 0 1 0 1 1 1 1 1 i",
"x x x x x x x x x x x x x x x x";
min_write_delay = 9000;
max_write_delay = 9000;
;
memory "lock"
size = 1;
read = "0 1 0 1 1 0 0 0 x x x x x x x x",
"x x x x x x x x o o x x x x x x";
write = "1 0 1 0 1 1 0 0 1 1 1 1 1 i i 1",
"x x x x x x x x x x x x x x x x";
min_write_delay = 9000;
max_write_delay = 9000;
;
;
#------------------------------------------------------------
# ATmega103
#------------------------------------------------------------
part
id = "m103";
desc = "ATmega103";
stk500_devcode = 0xB1;
avr910_devcode = 0x41;
signature = 0x1e 0x97 0x01;
chip_erase_delay = 112000;
pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1",
"x x x x x x x x x x x x x x x x";
chip_erase = "1 0 1 0 1 1 0 0 1 0 0 0 0 0 0 0",
"x x x x x x x x x x x x x x x x";
timeout = 200;
stabdelay = 100;
cmdexedelay = 25;
synchloops = 32;
bytedelay = 0;
pollindex = 3;
pollvalue = 0x53;
predelay = 1;
postdelay = 1;
pollmethod = 0;
pp_controlstack =
0x0E, 0x1E, 0x8E, 0x9E, 0x2E, 0x3E, 0xAE, 0xBE,
0x4E, 0x5E, 0xCE, 0xDE, 0x6E, 0x7E, 0xEE, 0xDE,
0x66, 0x76, 0xE6, 0xF6, 0x6A, 0x7A, 0xEA, 0x7A,
0x7F, 0xFD, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00;
hventerstabdelay = 100;
progmodedelay = 0;
latchcycles = 0;
togglevtg = 0;
poweroffdelay = 0;
resetdelayms = 0;
resetdelayus = 0;
hvleavestabdelay = 15;
chiperasepulsewidth = 15;
chiperasepolltimeout = 0;
programfusepulsewidth = 2;
programfusepolltimeout = 0;
programlockpulsewidth = 0;
programlockpolltimeout = 10;
memory "eeprom"
size = 4096;
min_write_delay = 4000;
max_write_delay = 9000;
readback_p1 = 0x80;
readback_p2 = 0x7f;
read = " 1 0 1 0 0 0 0 0",
" x x x x a11 a10 a9 a8",
" a7 a6 a5 a4 a3 a2 a1 a0",
" o o o o o o o o";
write = " 1 1 0 0 0 0 0 0",
" x x x x a11 a10 a9 a8",
" a7 a6 a5 a4 a3 a2 a1 a0",
" i i i i i i i i";
mode = 0x04;
delay = 12;
blocksize = 64;
readsize = 256;
;
memory "flash"
paged = yes;
size = 131072;
page_size = 256;
num_pages = 512;
min_write_delay = 22000;
max_write_delay = 56000;
readback_p1 = 0xff;
readback_p2 = 0xff;
read_lo = " 0 0 1 0 0 0 0 0",
"a15 a14 a13 a12 a11 a10 a9 a8",
" a7 a6 a5 a4 a3 a2 a1 a0",
" o o o o o o o o";
read_hi = " 0 0 1 0 1 0 0 0",
"a15 a14 a13 a12 a11 a10 a9 a8",
" a7 a6 a5 a4 a3 a2 a1 a0",
" o o o o o o o o";
loadpage_lo = " 0 1 0 0 0 0 0 0",
" x x x x x x x x",
" x a6 a5 a4 a3 a2 a1 a0",
" i i i i i i i i";
loadpage_hi = " 0 1 0 0 1 0 0 0",
" x x x x x x x x",
" x a6 a5 a4 a3 a2 a1 a0",
" i i i i i i i i";
writepage = " 0 1 0 0 1 1 0 0",
"a15 a14 a13 a12 a11 a10 a9 a8",
" a7 x x x x x x x",
" x x x x x x x x";
mode = 0x11;
delay = 70;
blocksize = 256;
readsize = 256;
;
memory "fuse"
size = 1;
read = "0 1 0 1 0 0 0 0 x x x x x x x x",
"x x x x x x x x x x o x o 1 o o";
write = "1 0 1 0 1 1 0 0 1 0 1 1 i 1 i i",
"x x x x x x x x x x x x x x x x";
min_write_delay = 9000;
max_write_delay = 9000;
;
memory "lock"
size = 1;
read = "0 1 0 1 1 0 0 0 x x x x x x x x",
"x x x x x x x x x x x x x o o x";
write = "1 0 1 0 1 1 0 0 1 1 1 1 1 i i 1",
"x x x x x x x x x x x x x x x x";
min_write_delay = 9000;
max_write_delay = 9000;
;
memory "signature"
size = 3;
read = "0 0 1 1 0 0 0 0 x x x x x x x x",
"x x x x x x a1 a0 o o o o o o o o";
;
;
#------------------------------------------------------------
# ATmega64
#------------------------------------------------------------
part
id = "m64";
desc = "ATmega64";
has_jtag = yes;
stk500_devcode = 0xA0;
avr910_devcode = 0x45;
signature = 0x1e 0x96 0x02;
chip_erase_delay = 9000;
pagel = 0xD7;
bs2 = 0xA0;
reset = dedicated;
pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1",
"x x x x x x x x x x x x x x x x";
chip_erase = "1 0 1 0 1 1 0 0 1 0 0 0 0 0 0 0",
"x x x x x x x x x x x x x x x x";
timeout = 200;
stabdelay = 100;
cmdexedelay = 25;
synchloops = 32;
bytedelay = 0;
pollindex = 3;
pollvalue = 0x53;
predelay = 1;
postdelay = 1;
pollmethod = 0;
pp_controlstack =
0x0E, 0x1E, 0x0F, 0x1F, 0x2E, 0x3E, 0x2F, 0x3F,
0x4E, 0x5E, 0x4F, 0x5F, 0x6E, 0x7E, 0x6F, 0x7F,
0x66, 0x76, 0x67, 0x77, 0x6A, 0x7A, 0x6B, 0x7B,
0xBE, 0xFD, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00;
hventerstabdelay = 100;
progmodedelay = 0;
latchcycles = 6;
togglevtg = 0;
poweroffdelay = 0;
resetdelayms = 0;
resetdelayus = 0;
hvleavestabdelay = 15;
chiperasepulsewidth = 0;
chiperasepolltimeout = 10;
programfusepulsewidth = 0;
programfusepolltimeout = 5;
programlockpulsewidth = 0;
programlockpolltimeout = 5;
idr = 0x22;
spmcr = 0x68;
allowfullpagebitstream = yes;
ocdrev = 2;
memory "eeprom"
paged = no; /* leave this "no" */
page_size = 8; /* for parallel programming */
size = 2048;
min_write_delay = 9000;
max_write_delay = 9000;
readback_p1 = 0xff;
readback_p2 = 0xff;
read = " 1 0 1 0 0 0 0 0",
" x x x x a11 a10 a9 a8",
" a7 a6 a5 a4 a3 a2 a1 a0",
" o o o o o o o o";
write = " 1 1 0 0 0 0 0 0",
" x x x x a11 a10 a9 a8",
" a7 a6 a5 a4 a3 a2 a1 a0",
" i i i i i i i i";
mode = 0x04;
delay = 20;
blocksize = 64;
readsize = 256;
;
memory "flash"
paged = yes;
size = 65536;
page_size = 256;
num_pages = 256;
min_write_delay = 4500;
max_write_delay = 4500;
readback_p1 = 0xff;
readback_p2 = 0xff;
read_lo = " 0 0 1 0 0 0 0 0",
" x a14 a13 a12 a11 a10 a9 a8",
" a7 a6 a5 a4 a3 a2 a1 a0",
" o o o o o o o o";
read_hi = " 0 0 1 0 1 0 0 0",
" x a14 a13 a12 a11 a10 a9 a8",
" a7 a6 a5 a4 a3 a2 a1 a0",
" o o o o o o o o";
loadpage_lo = " 0 1 0 0 0 0 0 0",
" x x x x x x x x",
" x a6 a5 a4 a3 a2 a1 a0",
" i i i i i i i i";
loadpage_hi = " 0 1 0 0 1 0 0 0",
" x x x x x x x x",
" x a6 a5 a4 a3 a2 a1 a0",
" i i i i i i i i";
writepage = " 0 1 0 0 1 1 0 0",
" x a14 a13 a12 a11 a10 a9 a8",
" a7 x x x x x x x",
" x x x x x x x x";
mode = 0x21;
delay = 6;
blocksize = 128;
readsize = 256;
;
memory "lfuse"
size = 1;
write = "1 0 1 0 1 1 0 0 1 0 1 0 0 0 0 0",
"x x x x x x x x i i i i i i i i";
read = "0 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0",
"x x x x x x x x o o o o o o o o";
min_write_delay = 9000;
max_write_delay = 9000;
;
memory "hfuse"
size = 1;
write = "1 0 1 0 1 1 0 0 1 0 1 0 1 0 0 0",
"x x x x x x x x i i i i i i i i";
read = "0 1 0 1 1 0 0 0 0 0 0 0 1 0 0 0",
"x x x x x x x x o o o o o o o o";
min_write_delay = 9000;
max_write_delay = 9000;
;
memory "efuse"
size = 1;
write = "1 0 1 0 1 1 0 0 1 0 1 0 0 1 0 0",
"x x x x x x x x x x x x x x i i";
read = "0 1 0 1 0 0 0 0 0 0 0 0 1 0 0 0",
"x x x x x x x x o o o o o o o o";
min_write_delay = 9000;
max_write_delay = 9000;
;
memory "lock"
size = 1;
read = "0 1 0 1 1 0 0 0 0 0 0 0 0 0 0 0",
"x x x x x x x x x x o o o o o o";
write = "1 0 1 0 1 1 0 0 1 1 1 x x x x x",
"x x x x x x x x 1 1 i i i i i i";
min_write_delay = 9000;
max_write_delay = 9000;
;
memory "calibration"
size = 4;
read = "0 0 1 1 1 0 0 0 x x x x x x x x",
"0 0 0 0 0 0 a1 a0 o o o o o o o o";
;
memory "signature"
size = 3;
read = "0 0 1 1 0 0 0 0 x x x x x x x x",
"x x x x x x a1 a0 o o o o o o o o";
;
;
#------------------------------------------------------------
# ATmega128
#------------------------------------------------------------
part
id = "m128";
desc = "ATmega128";
has_jtag = yes;
stk500_devcode = 0xB2;
avr910_devcode = 0x43;
signature = 0x1e 0x97 0x02;
chip_erase_delay = 9000;
pagel = 0xD7;
bs2 = 0xA0;
reset = dedicated;
pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1",
"x x x x x x x x x x x x x x x x";
chip_erase = "1 0 1 0 1 1 0 0 1 0 0 0 0 0 0 0",
"x x x x x x x x x x x x x x x x";
timeout = 200;
stabdelay = 100;
cmdexedelay = 25;
synchloops = 32;
bytedelay = 0;
pollindex = 3;
pollvalue = 0x53;
predelay = 1;
postdelay = 1;
pollmethod = 0;
pp_controlstack =
0x0E, 0x1E, 0x0F, 0x1F, 0x2E, 0x3E, 0x2F, 0x3F,
0x4E, 0x5E, 0x4F, 0x5F, 0x6E, 0x7E, 0x6F, 0x7F,
0x66, 0x76, 0x67, 0x77, 0x6A, 0x7A, 0x6B, 0x7B,
0xBE, 0xFD, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00;
hventerstabdelay = 100;
progmodedelay = 0;
latchcycles = 6;
togglevtg = 0;
poweroffdelay = 0;
resetdelayms = 0;
resetdelayus = 0;
hvleavestabdelay = 15;
chiperasepulsewidth = 0;
chiperasepolltimeout = 10;
programfusepulsewidth = 0;
programfusepolltimeout = 5;
programlockpulsewidth = 0;
programlockpolltimeout = 5;
idr = 0x22;
spmcr = 0x68;
rampz = 0x3b;
allowfullpagebitstream = yes;
ocdrev = 1;
memory "eeprom"
paged = no; /* leave this "no" */
page_size = 8; /* for parallel programming */
size = 4096;
min_write_delay = 9000;
max_write_delay = 9000;
readback_p1 = 0xff;
readback_p2 = 0xff;
read = " 1 0 1 0 0 0 0 0",
" x x x x a11 a10 a9 a8",
" a7 a6 a5 a4 a3 a2 a1 a0",
" o o o o o o o o";
write = " 1 1 0 0 0 0 0 0",
" x x x x a11 a10 a9 a8",
" a7 a6 a5 a4 a3 a2 a1 a0",
" i i i i i i i i";
mode = 0x04;
delay = 12;
blocksize = 64;
readsize = 256;
;
memory "flash"
paged = yes;
size = 131072;
page_size = 256;
num_pages = 512;
min_write_delay = 4500;
max_write_delay = 4500;
readback_p1 = 0xff;
readback_p2 = 0xff;
read_lo = " 0 0 1 0 0 0 0 0",
"a15 a14 a13 a12 a11 a10 a9 a8",
" a7 a6 a5 a4 a3 a2 a1 a0",
" o o o o o o o o";
read_hi = " 0 0 1 0 1 0 0 0",
"a15 a14 a13 a12 a11 a10 a9 a8",
" a7 a6 a5 a4 a3 a2 a1 a0",
" o o o o o o o o";
loadpage_lo = " 0 1 0 0 0 0 0 0",
" x x x x x x x x",
" x a6 a5 a4 a3 a2 a1 a0",
" i i i i i i i i";
loadpage_hi = " 0 1 0 0 1 0 0 0",
" x x x x x x x x",
" x a6 a5 a4 a3 a2 a1 a0",
" i i i i i i i i";
writepage = " 0 1 0 0 1 1 0 0",
"a15 a14 a13 a12 a11 a10 a9 a8",
" a7 x x x x x x x",
" x x x x x x x x";
mode = 0x21;
delay = 6;
blocksize = 128;
readsize = 256;
;
memory "lfuse"
size = 1;
write = "1 0 1 0 1 1 0 0 1 0 1 0 0 0 0 0",
"x x x x x x x x i i i i i i i i";
read = "0 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0",
"x x x x x x x x o o o o o o o o";
min_write_delay = 9000;
max_write_delay = 9000;
;
memory "hfuse"
size = 1;
write = "1 0 1 0 1 1 0 0 1 0 1 0 1 0 0 0",
"x x x x x x x x i i i i i i i i";
read = "0 1 0 1 1 0 0 0 0 0 0 0 1 0 0 0",
"x x x x x x x x o o o o o o o o";
min_write_delay = 9000;
max_write_delay = 9000;
;
memory "efuse"
size = 1;
write = "1 0 1 0 1 1 0 0 1 0 1 0 0 1 0 0",
"x x x x x x x x x x x x x x i i";
read = "0 1 0 1 0 0 0 0 0 0 0 0 1 0 0 0",
"x x x x x x x x o o o o o o o o";
min_write_delay = 9000;
max_write_delay = 9000;
;
memory "lock"
size = 1;
read = "0 1 0 1 1 0 0 0 0 0 0 0 0 0 0 0",
"x x x x x x x x x x o o o o o o";
write = "1 0 1 0 1 1 0 0 1 1 1 x x x x x",
"x x x x x x x x 1 1 i i i i i i";
min_write_delay = 9000;
max_write_delay = 9000;
;
memory "calibration"
size = 4;
read = "0 0 1 1 1 0 0 0 x x x x x x x x",
"0 0 0 0 0 0 a1 a0 o o o o o o o o";
;
memory "signature"
size = 3;
read = "0 0 1 1 0 0 0 0 x x x x x x x x",
"x x x x x x a1 a0 o o o o o o o o";
;
;
#------------------------------------------------------------
# AT90CAN128
#------------------------------------------------------------
part
id = "c128";
desc = "AT90CAN128";
has_jtag = yes;
stk500_devcode = 0xB3;
# avr910_devcode = 0x43;
signature = 0x1e 0x97 0x81;
chip_erase_delay = 9000;
pagel = 0xD7;
bs2 = 0xA0;
reset = dedicated;
pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1",
"x x x x x x x x x x x x x x x x";
chip_erase = "1 0 1 0 1 1 0 0 1 0 0 x x x x x",
"x x x x x x x x x x x x x x x x";
timeout = 200;
stabdelay = 100;
cmdexedelay = 25;
synchloops = 32;
bytedelay = 0;
pollindex = 3;
pollvalue = 0x53;
predelay = 1;
postdelay = 1;
pollmethod = 1;
pp_controlstack =
0x0E, 0x1E, 0x0F, 0x1F, 0x2E, 0x3E, 0x2F, 0x3F,
0x4E, 0x5E, 0x4F, 0x5F, 0x6E, 0x7E, 0x6F, 0x7F,
0x66, 0x76, 0x67, 0x77, 0x6A, 0x7A, 0x6B, 0x7B,
0xBE, 0xFD, 0x00, 0x01, 0x00, 0x00, 0x00, 0x01;
hventerstabdelay = 100;
progmodedelay = 0;
latchcycles = 6;
togglevtg = 0;
poweroffdelay = 0;
resetdelayms = 0;
resetdelayus = 0;
hvleavestabdelay = 15;
chiperasepulsewidth = 0;
chiperasepolltimeout = 10;
programfusepulsewidth = 0;
programfusepolltimeout = 5;
programlockpulsewidth = 0;
programlockpolltimeout = 5;
idr = 0x31;
spmcr = 0x57;
rampz = 0x3b;
eecr = 0x3f;
allowfullpagebitstream = no;
ocdrev = 3;
memory "eeprom"
paged = no; /* leave this "no" */
page_size = 8; /* for parallel programming */
size = 4096;
min_write_delay = 9000;
max_write_delay = 9000;
readback_p1 = 0xff;
readback_p2 = 0xff;
read = " 1 0 1 0 0 0 0 0",
" 0 0 0 x a11 a10 a9 a8",
" a7 a6 a5 a4 a3 a2 a1 a0",
" o o o o o o o o";
write = " 1 1 0 0 0 0 0 0",
" 0 0 0 x a11 a10 a9 a8",
" a7 a6 a5 a4 a3 a2 a1 a0",
" i i i i i i i i";
loadpage_lo = " 1 1 0 0 0 0 0 1",
" 0 0 0 0 0 0 0 0",
" 0 0 0 0 0 a2 a1 a0",
" i i i i i i i i";
writepage = " 1 1 0 0 0 0 1 0",
" 0 0 x x a11 a10 a9 a8",
" a7 a6 a5 a4 a3 0 0 0",
" x x x x x x x x";
mode = 0x41;
delay = 20;
blocksize = 8;
readsize = 256;
;
memory "flash"
paged = yes;
size = 131072;
page_size = 256;
num_pages = 512;
min_write_delay = 4500;
max_write_delay = 4500;
readback_p1 = 0xff;
readback_p2 = 0xff;
read_lo = " 0 0 1 0 0 0 0 0",
"a15 a14 a13 a12 a11 a10 a9 a8",
" a7 a6 a5 a4 a3 a2 a1 a0",
" o o o o o o o o";
read_hi = " 0 0 1 0 1 0 0 0",
"a15 a14 a13 a12 a11 a10 a9 a8",
" a7 a6 a5 a4 a3 a2 a1 a0",
" o o o o o o o o";
loadpage_lo = " 0 1 0 0 0 0 0 0",
" 0 0 0 x x x x x",
" x a6 a5 a4 a3 a2 a1 a0",
" i i i i i i i i";
loadpage_hi = " 0 1 0 0 1 0 0 0",
" 0 0 0 x x x x x",
" x a6 a5 a4 a3 a2 a1 a0",
" i i i i i i i i";
writepage = " 0 1 0 0 1 1 0 0",
"a15 a14 a13 a12 a11 a10 a9 a8",
" a7 x x x x x x x",
" x x x x x x x x";
mode = 0x41;
delay = 6;
blocksize = 256;
readsize = 256;
;
memory "lfuse"
size = 1;
write = "1 0 1 0 1 1 0 0 1 0 1 0 0 0 0 0",
"x x x x x x x x i i i i i i i i";
read = "0 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0",
"x x x x x x x x o o o o o o o o";
min_write_delay = 9000;
max_write_delay = 9000;
;
memory "hfuse"
size = 1;
write = "1 0 1 0 1 1 0 0 1 0 1 0 1 0 0 0",
"x x x x x x x x i i i i i i i i";
read = "0 1 0 1 1 0 0 0 0 0 0 0 1 0 0 0",
"x x x x x x x x o o o o o o o o";
min_write_delay = 9000;
max_write_delay = 9000;
;
memory "efuse"
size = 1;
write = "1 0 1 0 1 1 0 0 1 0 1 0 0 1 0 0",
"x x x x x x x x x x x x i i i i";
read = "0 1 0 1 0 0 0 0 0 0 0 0 1 0 0 0",
"x x x x x x x x o o o o o o o o";
min_write_delay = 9000;
max_write_delay = 9000;
;
memory "lock"
size = 1;
read = "0 1 0 1 1 0 0 0 0 0 0 0 0 0 0 0",
"x x x x x x x x x x o o o o o o";
write = "1 0 1 0 1 1 0 0 1 1 1 x x x x x",
"x x x x x x x x 1 1 i i i i i i";
min_write_delay = 9000;
max_write_delay = 9000;
;
memory "calibration"
size = 1;
read = "0 0 1 1 1 0 0 0 0 0 0 x x x x x",
"0 0 0 0 0 0 0 0 o o o o o o o o";
;
memory "signature"
size = 3;
read = "0 0 1 1 0 0 0 0 x x x x x x x x",
"x x x x x x a1 a0 o o o o o o o o";
;
;
#------------------------------------------------------------
# AT90CAN64
#------------------------------------------------------------
part
id = "c64";
desc = "AT90CAN64";
has_jtag = yes;
stk500_devcode = 0xB3;
# avr910_devcode = 0x43;
signature = 0x1e 0x96 0x81;
chip_erase_delay = 9000;
pagel = 0xD7;
bs2 = 0xA0;
reset = dedicated;
pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1",
"x x x x x x x x x x x x x x x x";
chip_erase = "1 0 1 0 1 1 0 0 1 0 0 x x x x x",
"x x x x x x x x x x x x x x x x";
timeout = 200;
stabdelay = 100;
cmdexedelay = 25;
synchloops = 32;
bytedelay = 0;
pollindex = 3;
pollvalue = 0x53;
predelay = 1;
postdelay = 1;
pollmethod = 1;
pp_controlstack =
0x0E, 0x1E, 0x0F, 0x1F, 0x2E, 0x3E, 0x2F, 0x3F,
0x4E, 0x5E, 0x4F, 0x5F, 0x6E, 0x7E, 0x6F, 0x7F,
0x66, 0x76, 0x67, 0x77, 0x6A, 0x7A, 0x6B, 0x7B,
0xBE, 0xFD, 0x00, 0x01, 0x00, 0x00, 0x00, 0x01;
hventerstabdelay = 100;
progmodedelay = 0;
latchcycles = 6;
togglevtg = 0;
poweroffdelay = 0;
resetdelayms = 0;
resetdelayus = 0;
hvleavestabdelay = 15;
chiperasepulsewidth = 0;
chiperasepolltimeout = 10;
programfusepulsewidth = 0;
programfusepolltimeout = 5;
programlockpulsewidth = 0;
programlockpolltimeout = 5;
idr = 0x31;
spmcr = 0x57;
rampz = 0x3b;
eecr = 0x3f;
allowfullpagebitstream = no;
ocdrev = 3;
memory "eeprom"
paged = no; /* leave this "no" */
page_size = 8; /* for parallel programming */
size = 2048;
min_write_delay = 9000;
max_write_delay = 9000;
readback_p1 = 0xff;
readback_p2 = 0xff;
read = " 1 0 1 0 0 0 0 0",
" 0 0 0 x x a10 a9 a8",
" a7 a6 a5 a4 a3 a2 a1 a0",
" o o o o o o o o";
write = " 1 1 0 0 0 0 0 0",
" 0 0 0 x x a10 a9 a8",
" a7 a6 a5 a4 a3 a2 a1 a0",
" i i i i i i i i";
loadpage_lo = " 1 1 0 0 0 0 0 1",
" 0 0 0 0 0 0 0 0",
" 0 0 0 0 0 a2 a1 a0",
" i i i i i i i i";
writepage = " 1 1 0 0 0 0 1 0",
" 0 0 x x x a10 a9 a8",
" a7 a6 a5 a4 a3 0 0 0",
" x x x x x x x x";
mode = 0x41;
delay = 20;
blocksize = 8;
readsize = 256;
;
memory "flash"
paged = yes;
size = 65536;
page_size = 256;
num_pages = 256;
min_write_delay = 4500;
max_write_delay = 4500;
readback_p1 = 0xff;
readback_p2 = 0xff;
read_lo = " 0 0 1 0 0 0 0 0",
"a15 a14 a13 a12 a11 a10 a9 a8",
" a7 a6 a5 a4 a3 a2 a1 a0",
" o o o o o o o o";
read_hi = " 0 0 1 0 1 0 0 0",
"a15 a14 a13 a12 a11 a10 a9 a8",
" a7 a6 a5 a4 a3 a2 a1 a0",
" o o o o o o o o";
loadpage_lo = " 0 1 0 0 0 0 0 0",
" 0 0 0 x x x x x",
" x a6 a5 a4 a3 a2 a1 a0",
" i i i i i i i i";
loadpage_hi = " 0 1 0 0 1 0 0 0",
" 0 0 0 x x x x x",
" x a6 a5 a4 a3 a2 a1 a0",
" i i i i i i i i";
writepage = " 0 1 0 0 1 1 0 0",
"a15 a14 a13 a12 a11 a10 a9 a8",
" a7 x x x x x x x",
" x x x x x x x x";
mode = 0x41;
delay = 6;
blocksize = 256;
readsize = 256;
;
memory "lfuse"
size = 1;
write = "1 0 1 0 1 1 0 0 1 0 1 0 0 0 0 0",
"x x x x x x x x i i i i i i i i";
read = "0 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0",
"x x x x x x x x o o o o o o o o";
min_write_delay = 9000;
max_write_delay = 9000;
;
memory "hfuse"
size = 1;
write = "1 0 1 0 1 1 0 0 1 0 1 0 1 0 0 0",
"x x x x x x x x i i i i i i i i";
read = "0 1 0 1 1 0 0 0 0 0 0 0 1 0 0 0",
"x x x x x x x x o o o o o o o o";
min_write_delay = 9000;
max_write_delay = 9000;
;
memory "efuse"
size = 1;
write = "1 0 1 0 1 1 0 0 1 0 1 0 0 1 0 0",
"x x x x x x x x x x x x i i i i";
read = "0 1 0 1 0 0 0 0 0 0 0 0 1 0 0 0",
"x x x x x x x x o o o o o o o o";
min_write_delay = 9000;
max_write_delay = 9000;
;
memory "lock"
size = 1;
read = "0 1 0 1 1 0 0 0 0 0 0 0 0 0 0 0",
"x x x x x x x x x x o o o o o o";
write = "1 0 1 0 1 1 0 0 1 1 1 x x x x x",
"x x x x x x x x 1 1 i i i i i i";
min_write_delay = 9000;
max_write_delay = 9000;
;
memory "calibration"
size = 1;
read = "0 0 1 1 1 0 0 0 0 0 0 x x x x x",
"0 0 0 0 0 0 0 0 o o o o o o o o";
;
memory "signature"
size = 3;
read = "0 0 1 1 0 0 0 0 x x x x x x x x",
"x x x x x x a1 a0 o o o o o o o o";
;
;
#------------------------------------------------------------
# AT90CAN32
#------------------------------------------------------------
part
id = "c32";
desc = "AT90CAN32";
has_jtag = yes;
stk500_devcode = 0xB3;
# avr910_devcode = 0x43;
signature = 0x1e 0x95 0x81;
chip_erase_delay = 9000;
pagel = 0xD7;
bs2 = 0xA0;
reset = dedicated;
pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1",
"x x x x x x x x x x x x x x x x";
chip_erase = "1 0 1 0 1 1 0 0 1 0 0 x x x x x",
"x x x x x x x x x x x x x x x x";
timeout = 200;
stabdelay = 100;
cmdexedelay = 25;
synchloops = 32;
bytedelay = 0;
pollindex = 3;
pollvalue = 0x53;
predelay = 1;
postdelay = 1;
pollmethod = 1;
pp_controlstack =
0x0E, 0x1E, 0x0F, 0x1F, 0x2E, 0x3E, 0x2F, 0x3F,
0x4E, 0x5E, 0x4F, 0x5F, 0x6E, 0x7E, 0x6F, 0x7F,
0x66, 0x76, 0x67, 0x77, 0x6A, 0x7A, 0x6B, 0x7B,
0xBE, 0xFD, 0x00, 0x01, 0x00, 0x00, 0x00, 0x01;
hventerstabdelay = 100;
progmodedelay = 0;
latchcycles = 6;
togglevtg = 0;
poweroffdelay = 0;
resetdelayms = 0;
resetdelayus = 0;
hvleavestabdelay = 15;
chiperasepulsewidth = 0;
chiperasepolltimeout = 10;
programfusepulsewidth = 0;
programfusepolltimeout = 5;
programlockpulsewidth = 0;
programlockpolltimeout = 5;
idr = 0x31;
spmcr = 0x57;
rampz = 0x3b;
eecr = 0x3f;
allowfullpagebitstream = no;
ocdrev = 3;
memory "eeprom"
paged = no; /* leave this "no" */
page_size = 8; /* for parallel programming */
size = 1024;
min_write_delay = 9000;
max_write_delay = 9000;
readback_p1 = 0xff;
readback_p2 = 0xff;
read = " 1 0 1 0 0 0 0 0",
" 0 0 0 x x x a9 a8",
" a7 a6 a5 a4 a3 a2 a1 a0",
" o o o o o o o o";
write = " 1 1 0 0 0 0 0 0",
" 0 0 0 x x x a9 a8",
" a7 a6 a5 a4 a3 a2 a1 a0",
" i i i i i i i i";
loadpage_lo = " 1 1 0 0 0 0 0 1",
" 0 0 0 0 0 0 0 0",
" 0 0 0 0 0 a2 a1 a0",
" i i i i i i i i";
writepage = " 1 1 0 0 0 0 1 0",
" 0 0 x x x x a9 a8",
" a7 a6 a5 a4 a3 0 0 0",
" x x x x x x x x";
mode = 0x41;
delay = 20;
blocksize = 8;
readsize = 256;
;
memory "flash"
paged = yes;
size = 32768;
page_size = 256;
num_pages = 128;
min_write_delay = 4500;
max_write_delay = 4500;
readback_p1 = 0xff;
readback_p2 = 0xff;
read_lo = " 0 0 1 0 0 0 0 0",
"a15 a14 a13 a12 a11 a10 a9 a8",
" a7 a6 a5 a4 a3 a2 a1 a0",
" o o o o o o o o";
read_hi = " 0 0 1 0 1 0 0 0",
"a15 a14 a13 a12 a11 a10 a9 a8",
" a7 a6 a5 a4 a3 a2 a1 a0",
" o o o o o o o o";
loadpage_lo = " 0 1 0 0 0 0 0 0",
" 0 0 0 x x x x x",
" x a6 a5 a4 a3 a2 a1 a0",
" i i i i i i i i";
loadpage_hi = " 0 1 0 0 1 0 0 0",
" 0 0 0 x x x x x",
" x a6 a5 a4 a3 a2 a1 a0",
" i i i i i i i i";
writepage = " 0 1 0 0 1 1 0 0",
"a15 a14 a13 a12 a11 a10 a9 a8",
" a7 x x x x x x x",
" x x x x x x x x";
mode = 0x41;
delay = 6;
blocksize = 256;
readsize = 256;
;
memory "lfuse"
size = 1;
write = "1 0 1 0 1 1 0 0 1 0 1 0 0 0 0 0",
"x x x x x x x x i i i i i i i i";
read = "0 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0",
"x x x x x x x x o o o o o o o o";
min_write_delay = 9000;
max_write_delay = 9000;
;
memory "hfuse"
size = 1;
write = "1 0 1 0 1 1 0 0 1 0 1 0 1 0 0 0",
"x x x x x x x x i i i i i i i i";
read = "0 1 0 1 1 0 0 0 0 0 0 0 1 0 0 0",
"x x x x x x x x o o o o o o o o";
min_write_delay = 9000;
max_write_delay = 9000;
;
memory "efuse"
size = 1;
write = "1 0 1 0 1 1 0 0 1 0 1 0 0 1 0 0",
"x x x x x x x x x x x x i i i i";
read = "0 1 0 1 0 0 0 0 0 0 0 0 1 0 0 0",
"x x x x x x x x o o o o o o o o";
min_write_delay = 9000;
max_write_delay = 9000;
;
memory "lock"
size = 1;
read = "0 1 0 1 1 0 0 0 0 0 0 0 0 0 0 0",
"x x x x x x x x x x o o o o o o";
write = "1 0 1 0 1 1 0 0 1 1 1 x x x x x",
"x x x x x x x x 1 1 i i i i i i";
min_write_delay = 9000;
max_write_delay = 9000;
;
memory "calibration"
size = 1;
read = "0 0 1 1 1 0 0 0 0 0 0 x x x x x",
"0 0 0 0 0 0 0 0 o o o o o o o o";
;
memory "signature"
size = 3;
read = "0 0 1 1 0 0 0 0 x x x x x x x x",
"x x x x x x a1 a0 o o o o o o o o";
;
;
#------------------------------------------------------------
# ATmega16
#------------------------------------------------------------
part
id = "m16";
desc = "ATmega16";
has_jtag = yes;
stk500_devcode = 0x82;
avr910_devcode = 0x74;
signature = 0x1e 0x94 0x03;
pagel = 0xd7;
bs2 = 0xa0;
chip_erase_delay = 9000;
pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1",
"x x x x x x x x x x x x x x x x";
chip_erase = "1 0 1 0 1 1 0 0 1 0 0 x x x x x",
"x x x x x x x x x x x x x x x x";
timeout = 200;
stabdelay = 100;
cmdexedelay = 25;
synchloops = 32;
bytedelay = 0;
pollindex = 3;
pollvalue = 0x53;
predelay = 1;
postdelay = 1;
pollmethod = 0;
pp_controlstack =
0x0E, 0x1E, 0x0F, 0x1F, 0x2E, 0x3E, 0x2F, 0x3F,
0x4E, 0x5E, 0x4F, 0x5F, 0x6E, 0x7E, 0x6F, 0x7F,
0x66, 0x76, 0x67, 0x77, 0x6A, 0x7A, 0x6B, 0x7B,
0xBE, 0xFD, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00;
hventerstabdelay = 100;
progmodedelay = 100;
latchcycles = 6;
togglevtg = 0;
poweroffdelay = 0;
resetdelayms = 0;
resetdelayus = 0;
hvleavestabdelay = 15;
resetdelay = 15;
chiperasepulsewidth = 0;
chiperasepolltimeout = 10;
programfusepulsewidth = 0;
programfusepolltimeout = 5;
programlockpulsewidth = 0;
programlockpolltimeout = 5;
idr = 0x31;
spmcr = 0x57;
allowfullpagebitstream = yes;
ocdrev = 2;
memory "eeprom"
paged = no; /* leave this "no" */
page_size = 4; /* for parallel programming */
size = 512;
min_write_delay = 9000;
max_write_delay = 9000;
readback_p1 = 0xff;
readback_p2 = 0xff;
read = " 1 0 1 0 0 0 0 0",
" 0 0 x x x x a9 a8",
" a7 a6 a5 a4 a3 a2 a1 a0",
" o o o o o o o o";
write = " 1 1 0 0 0 0 0 0",
" 0 0 x x x x a9 a8",
" a7 a6 a5 a4 a3 a2 a1 a0",
" i i i i i i i i";
loadpage_lo = " 1 1 0 0 0 0 0 1",
" 0 0 0 0 0 0 0 0",
" 0 0 0 0 0 0 a1 a0",
" i i i i i i i i";
writepage = " 1 1 0 0 0 0 1 0",
" 0 0 x x x x a9 a8",
" a7 a6 a5 a4 a3 a2 0 0",
" x x x x x x x x";
mode = 0x04;
delay = 10;
blocksize = 128;
readsize = 256;
;
memory "flash"
paged = yes;
size = 16384;
page_size = 128;
num_pages = 128;
min_write_delay = 4500;
max_write_delay = 4500;
readback_p1 = 0xff;
readback_p2 = 0xff;
read_lo = " 0 0 1 0 0 0 0 0",
" 0 0 a13 a12 a11 a10 a9 a8",
" a7 a6 a5 a4 a3 a2 a1 a0",
" o o o o o o o o";
read_hi = " 0 0 1 0 1 0 0 0",
" 0 0 a13 a12 a11 a10 a9 a8",
" a7 a6 a5 a4 a3 a2 a1 a0",
" o o o o o o o o";
loadpage_lo = " 0 1 0 0 0 0 0 0",
" 0 0 x x x x x x",
" x x a5 a4 a3 a2 a1 a0",
" i i i i i i i i";
loadpage_hi = " 0 1 0 0 1 0 0 0",
" 0 0 x x x x x x",
" x x a5 a4 a3 a2 a1 a0",
" i i i i i i i i";
writepage = " 0 1 0 0 1 1 0 0",
" 0 0 a13 a12 a11 a10 a9 a8",
" a7 a6 x x x x x x",
" x x x x x x x x";
mode = 0x21;
delay = 6;
blocksize = 128;
readsize = 256;
;
memory "lock"
size = 1;
read = "0 1 0 1 1 0 0 0 0 0 0 0 0 0 0 0",
"x x x x x x x x x x o o o o o o";
write = "1 0 1 0 1 1 0 0 1 1 1 x x x x x",
"x x x x x x x x 1 1 i i i i i i";
min_write_delay = 9000;
max_write_delay = 9000;
;
memory "lfuse"
size = 1;
read = "0 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0",
"x x x x x x x x o o o o o o o o";
write = "1 0 1 0 1 1 0 0 1 0 1 0 0 0 0 0",
"x x x x x x x x i i i i i i i i";
min_write_delay = 9000;
max_write_delay = 9000;
;
memory "hfuse"
size = 1;
read = "0 1 0 1 1 0 0 0 0 0 0 0 1 0 0 0",
"x x x x x x x x o o o o o o o o";
write = "1 0 1 0 1 1 0 0 1 0 1 0 1 0 0 0",
"x x x x x x x x i i i i i i i i";
min_write_delay = 9000;
max_write_delay = 9000;
;
memory "signature"
size = 3;
read = "0 0 1 1 0 0 0 0 x x x x x x x x",
"x x x x x x a1 a0 o o o o o o o o";
;
memory "calibration"
size = 4;
read = "0 0 1 1 1 0 0 0 0 0 0 x x x x x",
"0 0 0 0 0 0 a1 a0 o o o o o o o o";
;
;
#------------------------------------------------------------
# ATmega164P
#------------------------------------------------------------
# close to ATmega16
part parent "m16"
id = "m164p";
desc = "ATmega164P";
signature = 0x1e 0x94 0x0a;
progmodedelay = 0;
latchcycles = 5;
togglevtg = 1;
poweroffdelay = 15;
resetdelayms = 1;
allowfullpagebitstream = no;
chip_erase_delay = 55000;
ocdrev = 3;
;
#------------------------------------------------------------
# ATmega324P
#------------------------------------------------------------
# similar to ATmega164P
part
id = "m324p";
desc = "ATmega324P";
has_jtag = yes;
stk500_devcode = 0x82; # no STK500v1 support, use the ATmega16 one
avr910_devcode = 0x74;
signature = 0x1e 0x95 0x08;
pagel = 0xd7;
bs2 = 0xa0;
chip_erase_delay = 55000;
pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1",
"x x x x x x x x x x x x x x x x";
chip_erase = "1 0 1 0 1 1 0 0 1 0 0 x x x x x",
"x x x x x x x x x x x x x x x x";
timeout = 200;
stabdelay = 100;
cmdexedelay = 25;
synchloops = 32;
bytedelay = 0;
pollindex = 3;
pollvalue = 0x53;
predelay = 1;
postdelay = 1;
pollmethod = 0;
pp_controlstack =
0x0E, 0x1E, 0x0F, 0x1F, 0x2E, 0x3E, 0x2F, 0x3F,
0x4E, 0x5E, 0x4F, 0x5F, 0x6E, 0x7E, 0x6F, 0x7F,
0x66, 0x76, 0x67, 0x77, 0x6A, 0x7A, 0x6B, 0x7B,
0xBE, 0xFD, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00;
hventerstabdelay = 100;
progmodedelay = 0;
latchcycles = 5;
togglevtg = 1;
poweroffdelay = 15;
resetdelayms = 1;
resetdelayus = 0;
hvleavestabdelay = 15;
chiperasepulsewidth = 0;
chiperasepolltimeout = 10;
programfusepulsewidth = 0;
programfusepolltimeout = 5;
programlockpulsewidth = 0;
programlockpolltimeout = 5;
idr = 0x31;
spmcr = 0x57;
allowfullpagebitstream = no;
ocdrev = 3;
memory "eeprom"
paged = no; /* leave this "no" */
page_size = 4; /* for parallel programming */
size = 1024;
min_write_delay = 9000;
max_write_delay = 9000;
readback_p1 = 0xff;
readback_p2 = 0xff;
read = " 1 0 1 0 0 0 0 0",
" 0 0 x x x a10 a9 a8",
" a7 a6 a5 a4 a3 a2 a1 a0",
" o o o o o o o o";
write = " 1 1 0 0 0 0 0 0",
" 0 0 x x x a10 a9 a8",
" a7 a6 a5 a4 a3 a2 a1 a0",
" i i i i i i i i";
loadpage_lo = " 1 1 0 0 0 0 0 1",
" 0 0 0 0 0 0 0 0",
" 0 0 0 0 0 0 a1 a0",
" i i i i i i i i";
writepage = " 1 1 0 0 0 0 1 0",
" 0 0 x x x a10 a9 a8",
" a7 a6 a5 a4 a3 a2 0 0",
" x x x x x x x x";
mode = 0x41;
delay = 10;
blocksize = 128;
readsize = 256;
;
memory "flash"
paged = yes;
size = 32768;
page_size = 128;
num_pages = 256;
min_write_delay = 4500;
max_write_delay = 4500;
readback_p1 = 0xff;
readback_p2 = 0xff;
read_lo = " 0 0 1 0 0 0 0 0",
" 0 a14 a13 a12 a11 a10 a9 a8",
" a7 a6 a5 a4 a3 a2 a1 a0",
" o o o o o o o o";
read_hi = " 0 0 1 0 1 0 0 0",
" 0 a14 a13 a12 a11 a10 a9 a8",
" a7 a6 a5 a4 a3 a2 a1 a0",
" o o o o o o o o";
loadpage_lo = " 0 1 0 0 0 0 0 0",
" 0 0 x x x x x x",
" x x a5 a4 a3 a2 a1 a0",
" i i i i i i i i";
loadpage_hi = " 0 1 0 0 1 0 0 0",
" 0 0 x x x x x x",
" x x a5 a4 a3 a2 a1 a0",
" i i i i i i i i";
writepage = " 0 1 0 0 1 1 0 0",
" 0 a14 a13 a12 a11 a10 a9 a8",
" a7 a6 x x x x x x",
" x x x x x x x x";
mode = 0x21;
delay = 6;
blocksize = 256;
readsize = 256;
;
memory "lock"
size = 1;
read = "0 1 0 1 1 0 0 0 0 0 0 0 0 0 0 0",
"x x x x x x x x x x o o o o o o";
write = "1 0 1 0 1 1 0 0 1 1 1 x x x x x",
"x x x x x x x x 1 1 i i i i i i";
min_write_delay = 9000;
max_write_delay = 9000;
;
memory "lfuse"
size = 1;
read = "0 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0",
"x x x x x x x x o o o o o o o o";
write = "1 0 1 0 1 1 0 0 1 0 1 0 0 0 0 0",
"x x x x x x x x i i i i i i i i";
min_write_delay = 9000;
max_write_delay = 9000;
;
memory "hfuse"
size = 1;
read = "0 1 0 1 1 0 0 0 0 0 0 0 1 0 0 0",
"x x x x x x x x o o o o o o o o";
write = "1 0 1 0 1 1 0 0 1 0 1 0 1 0 0 0",
"x x x x x x x x i i i i i i i i";
min_write_delay = 9000;
max_write_delay = 9000;
;
memory "efuse"
size = 1;
read = "0 1 0 1 0 0 0 0 0 0 0 0 1 0 0 0",
"x x x x x x x x o o o o o o o o";
write = "1 0 1 0 1 1 0 0 1 0 1 0 0 1 0 0",
"x x x x x x x x 1 1 1 1 1 i i i";
min_write_delay = 9000;
max_write_delay = 9000;
;
memory "signature"
size = 3;
read = "0 0 1 1 0 0 0 0 x x x x x x x x",
"x x x x x x a1 a0 o o o o o o o o";
;
memory "calibration"
size = 1;
read = "0 0 1 1 1 0 0 0 0 0 0 x x x x x",
"0 0 0 0 0 0 0 0 o o o o o o o o";
;
;
#------------------------------------------------------------
# ATmega324PA
#------------------------------------------------------------
# similar to ATmega324P
part parent "m324p"
id = "m324pa";
desc = "ATmega324PA";
signature = 0x1e 0x95 0x11;
ocdrev = 3;
;
#------------------------------------------------------------
# ATmega644
#------------------------------------------------------------
# similar to ATmega164
part
id = "m644";
desc = "ATmega644";
has_jtag = yes;
stk500_devcode = 0x82; # no STK500v1 support, use the ATmega16 one
avr910_devcode = 0x74;
signature = 0x1e 0x96 0x09;
pagel = 0xd7;
bs2 = 0xa0;
chip_erase_delay = 55000;
pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1",
"x x x x x x x x x x x x x x x x";
chip_erase = "1 0 1 0 1 1 0 0 1 0 0 x x x x x",
"x x x x x x x x x x x x x x x x";
timeout = 200;
stabdelay = 100;
cmdexedelay = 25;
synchloops = 32;
bytedelay = 0;
pollindex = 3;
pollvalue = 0x53;
predelay = 1;
postdelay = 1;
pollmethod = 0;
pp_controlstack =
0x0E, 0x1E, 0x0F, 0x1F, 0x2E, 0x3E, 0x2F, 0x3F,
0x4E, 0x5E, 0x4F, 0x5F, 0x6E, 0x7E, 0x6F, 0x7F,
0x66, 0x76, 0x67, 0x77, 0x6A, 0x7A, 0x6B, 0x7B,
0xBE, 0xFD, 0x00, 0x01, 0x00, 0x00, 0x00, 0x02;
hventerstabdelay = 100;
progmodedelay = 0;
latchcycles = 6;
togglevtg = 0;
poweroffdelay = 0;
resetdelayms = 0;
resetdelayus = 0;
hvleavestabdelay = 15;
chiperasepulsewidth = 0;
chiperasepolltimeout = 10;
programfusepulsewidth = 0;
programfusepolltimeout = 5;
programlockpulsewidth = 0;
programlockpolltimeout = 5;
idr = 0x31;
spmcr = 0x57;
allowfullpagebitstream = no;
ocdrev = 3;
memory "eeprom"
paged = no; /* leave this "no" */
page_size = 8; /* for parallel programming */
size = 2048;
min_write_delay = 9000;
max_write_delay = 9000;
readback_p1 = 0xff;
readback_p2 = 0xff;
read = " 1 0 1 0 0 0 0 0",
" 0 0 x x a11 a10 a9 a8",
" a7 a6 a5 a4 a3 a2 a1 a0",
" o o o o o o o o";
write = " 1 1 0 0 0 0 0 0",
" 0 0 x x a11 a10 a9 a8",
" a7 a6 a5 a4 a3 a2 a1 a0",
" i i i i i i i i";
loadpage_lo = " 1 1 0 0 0 0 0 1",
" 0 0 0 0 0 0 0 0",
" 0 0 0 0 0 a2 a1 a0",
" i i i i i i i i";
writepage = " 1 1 0 0 0 0 1 0",
" 0 0 x x a11 a10 a9 a8",
" a7 a6 a5 a4 a3 0 0 0",
" x x x x x x x x";
mode = 0x41;
delay = 10;
blocksize = 128;
readsize = 256;
;
memory "flash"
paged = yes;
size = 65536;
page_size = 256;
num_pages = 256;
min_write_delay = 4500;
max_write_delay = 4500;
readback_p1 = 0xff;
readback_p2 = 0xff;
read_lo = " 0 0 1 0 0 0 0 0",
"a15 a14 a13 a12 a11 a10 a9 a8",
" a7 a6 a5 a4 a3 a2 a1 a0",
" o o o o o o o o";
read_hi = " 0 0 1 0 1 0 0 0",
"a15 a14 a13 a12 a11 a10 a9 a8",
" a7 a6 a5 a4 a3 a2 a1 a0",
" o o o o o o o o";
loadpage_lo = " 0 1 0 0 0 0 0 0",
" 0 0 x x x x x x",
" x a6 a5 a4 a3 a2 a1 a0",
" i i i i i i i i";
loadpage_hi = " 0 1 0 0 1 0 0 0",
" 0 0 x x x x x x",
" x a6 a5 a4 a3 a2 a1 a0",
" i i i i i i i i";
writepage = " 0 1 0 0 1 1 0 0",
"a15 a14 a13 a12 a11 a10 a9 a8",
" a7 x x x x x x x",
" x x x x x x x x";
mode = 0x21;
delay = 6;
blocksize = 256;
readsize = 256;
;
memory "lock"
size = 1;
read = "0 1 0 1 1 0 0 0 0 0 0 0 0 0 0 0",
"x x x x x x x x x x o o o o o o";
write = "1 0 1 0 1 1 0 0 1 1 1 x x x x x",
"x x x x x x x x 1 1 i i i i i i";
min_write_delay = 9000;
max_write_delay = 9000;
;
memory "lfuse"
size = 1;
read = "0 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0",
"x x x x x x x x o o o o o o o o";
write = "1 0 1 0 1 1 0 0 1 0 1 0 0 0 0 0",
"x x x x x x x x i i i i i i i i";
min_write_delay = 9000;
max_write_delay = 9000;
;
memory "hfuse"
size = 1;
read = "0 1 0 1 1 0 0 0 0 0 0 0 1 0 0 0",
"x x x x x x x x o o o o o o o o";
write = "1 0 1 0 1 1 0 0 1 0 1 0 1 0 0 0",
"x x x x x x x x i i i i i i i i";
min_write_delay = 9000;
max_write_delay = 9000;
;
memory "efuse"
size = 1;
read = "0 1 0 1 0 0 0 0 0 0 0 0 1 0 0 0",
"x x x x x x x x o o o o o o o o";
write = "1 0 1 0 1 1 0 0 1 0 1 0 0 1 0 0",
"x x x x x x x x 1 1 1 1 1 i i i";
min_write_delay = 9000;
max_write_delay = 9000;
;
memory "signature"
size = 3;
read = "0 0 1 1 0 0 0 0 x x x x x x x x",
"x x x x x x a1 a0 o o o o o o o o";
;
memory "calibration"
size = 1;
read = "0 0 1 1 1 0 0 0 0 0 0 x x x x x",
"0 0 0 0 0 0 0 0 o o o o o o o o";
;
;
#------------------------------------------------------------
# ATmega644P
#------------------------------------------------------------
# similar to ATmega164p
part parent "m644"
id = "m644p";
desc = "ATmega644P";
signature = 0x1e 0x96 0x0a;
ocdrev = 3;
;
#------------------------------------------------------------
# ATmega1284
#------------------------------------------------------------
# similar to ATmega164
part
id = "m1284";
desc = "ATmega1284";
has_jtag = yes;
stk500_devcode = 0x82; # no STK500v1 support, use the ATmega16 one
avr910_devcode = 0x74;
signature = 0x1e 0x97 0x06;
pagel = 0xd7;
bs2 = 0xa0;
chip_erase_delay = 55000;
pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1",
"x x x x x x x x x x x x x x x x";
chip_erase = "1 0 1 0 1 1 0 0 1 0 0 x x x x x",
"x x x x x x x x x x x x x x x x";
timeout = 200;
stabdelay = 100;
cmdexedelay = 25;
synchloops = 32;
bytedelay = 0;
pollindex = 3;
pollvalue = 0x53;
predelay = 1;
postdelay = 1;
pollmethod = 1;
pp_controlstack =
0x0E, 0x1E, 0x0F, 0x1F, 0x2E, 0x3E, 0x2F, 0x3F,
0x4E, 0x5E, 0x4F, 0x5F, 0x6E, 0x7E, 0x6F, 0x7F,
0x66, 0x76, 0x67, 0x77, 0x6A, 0x7A, 0x6B, 0x7B,
0xBE, 0xFD, 0x00, 0x01, 0x00, 0x00, 0x00, 0x02;
hventerstabdelay = 100;
progmodedelay = 0;
latchcycles = 6;
togglevtg = 1;
poweroffdelay = 15;
resetdelayms = 1;
resetdelayus = 0;
hvleavestabdelay = 15;
chiperasepulsewidth = 0;
chiperasepolltimeout = 10;
programfusepulsewidth = 0;
programfusepolltimeout = 5;
programlockpulsewidth = 0;
programlockpolltimeout = 5;
idr = 0x31;
spmcr = 0x57;
allowfullpagebitstream = no;
ocdrev = 3;
memory "eeprom"
paged = no; /* leave this "no" */
page_size = 8; /* for parallel programming */
size = 4096;
min_write_delay = 9000;
max_write_delay = 9000;
readback_p1 = 0xff;
readback_p2 = 0xff;
read = " 1 0 1 0 0 0 0 0",
" 0 0 x x a11 a10 a9 a8",
" a7 a6 a5 a4 a3 a2 a1 a0",
" o o o o o o o o";
write = " 1 1 0 0 0 0 0 0",
" 0 0 x x a11 a10 a9 a8",
" a7 a6 a5 a4 a3 a2 a1 a0",
" i i i i i i i i";
loadpage_lo = " 1 1 0 0 0 0 0 1",
" 0 0 0 0 0 0 0 0",
" 0 0 0 0 0 a2 a1 a0",
" i i i i i i i i";
writepage = " 1 1 0 0 0 0 1 0",
" 0 0 x x a11 a10 a9 a8",
" a7 a6 a5 a4 a3 0 0 0",
" x x x x x x x x";
mode = 0x41;
delay = 10;
blocksize = 128;
readsize = 256;
;
memory "flash"
paged = yes;
size = 131072;
page_size = 256;
num_pages = 512;
min_write_delay = 4500;
max_write_delay = 4500;
readback_p1 = 0xff;
readback_p2 = 0xff;
read_lo = " 0 0 1 0 0 0 0 0",
"a15 a14 a13 a12 a11 a10 a9 a8",
" a7 a6 a5 a4 a3 a2 a1 a0",
" o o o o o o o o";
read_hi = " 0 0 1 0 1 0 0 0",
"a15 a14 a13 a12 a11 a10 a9 a8",
" a7 a6 a5 a4 a3 a2 a1 a0",
" o o o o o o o o";
loadpage_lo = " 0 1 0 0 0 0 0 0",
" 0 0 x x x x x x",
" x a6 a5 a4 a3 a2 a1 a0",
" i i i i i i i i";
loadpage_hi = " 0 1 0 0 1 0 0 0",
" 0 0 x x x x x x",
" x a6 a5 a4 a3 a2 a1 a0",
" i i i i i i i i";
writepage = " 0 1 0 0 1 1 0 0",
"a15 a14 a13 a12 a11 a10 a9 a8",
" a7 x x x x x x x",
" x x x x x x x x";
mode = 0x41;
delay = 10;
blocksize = 256;
readsize = 256;
;
memory "lock"
size = 1;
read = "0 1 0 1 1 0 0 0 0 0 0 0 0 0 0 0",
"x x x x x x x x x x o o o o o o";
write = "1 0 1 0 1 1 0 0 1 1 1 x x x x x",
"x x x x x x x x 1 1 i i i i i i";
min_write_delay = 9000;
max_write_delay = 9000;
;
memory "lfuse"
size = 1;
read = "0 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0",
"x x x x x x x x o o o o o o o o";
write = "1 0 1 0 1 1 0 0 1 0 1 0 0 0 0 0",
"x x x x x x x x i i i i i i i i";
min_write_delay = 9000;
max_write_delay = 9000;
;
memory "hfuse"
size = 1;
read = "0 1 0 1 1 0 0 0 0 0 0 0 1 0 0 0",
"x x x x x x x x o o o o o o o o";
write = "1 0 1 0 1 1 0 0 1 0 1 0 1 0 0 0",
"x x x x x x x x i i i i i i i i";
min_write_delay = 9000;
max_write_delay = 9000;
;
memory "efuse"
size = 1;
read = "0 1 0 1 0 0 0 0 0 0 0 0 1 0 0 0",
"x x x x x x x x o o o o o o o o";
write = "1 0 1 0 1 1 0 0 1 0 1 0 0 1 0 0",
"x x x x x x x x 1 1 1 1 1 i i i";
min_write_delay = 9000;
max_write_delay = 9000;
;
memory "signature"
size = 3;
read = "0 0 1 1 0 0 0 0 x x x x x x x x",
"x x x x x x a1 a0 o o o o o o o o";
;
memory "calibration"
size = 1;
read = "0 0 1 1 1 0 0 0 0 0 0 x x x x x",
"0 0 0 0 0 0 0 0 o o o o o o o o";
;
;
#------------------------------------------------------------
# ATmega1284P
#------------------------------------------------------------
# similar to ATmega164p
part
id = "m1284p";
desc = "ATmega1284P";
has_jtag = yes;
stk500_devcode = 0x82; # no STK500v1 support, use the ATmega16 one
avr910_devcode = 0x74;
signature = 0x1e 0x97 0x05;
pagel = 0xd7;
bs2 = 0xa0;
chip_erase_delay = 55000;
pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1",
"x x x x x x x x x x x x x x x x";
chip_erase = "1 0 1 0 1 1 0 0 1 0 0 x x x x x",
"x x x x x x x x x x x x x x x x";
timeout = 200;
stabdelay = 100;
cmdexedelay = 25;
synchloops = 32;
bytedelay = 0;
pollindex = 3;
pollvalue = 0x53;
predelay = 1;
postdelay = 1;
pollmethod = 1;
pp_controlstack =
0x0E, 0x1E, 0x0F, 0x1F, 0x2E, 0x3E, 0x2F, 0x3F,
0x4E, 0x5E, 0x4F, 0x5F, 0x6E, 0x7E, 0x6F, 0x7F,
0x66, 0x76, 0x67, 0x77, 0x6A, 0x7A, 0x6B, 0x7B,
0xBE, 0xFD, 0x00, 0x01, 0x00, 0x00, 0x00, 0x02;
hventerstabdelay = 100;
progmodedelay = 0;
latchcycles = 6;
togglevtg = 1;
poweroffdelay = 15;
resetdelayms = 1;
resetdelayus = 0;
hvleavestabdelay = 15;
chiperasepulsewidth = 0;
chiperasepolltimeout = 10;
programfusepulsewidth = 0;
programfusepolltimeout = 5;
programlockpulsewidth = 0;
programlockpolltimeout = 5;
idr = 0x31;
spmcr = 0x57;
allowfullpagebitstream = no;
ocdrev = 3;
memory "eeprom"
paged = no; /* leave this "no" */
page_size = 8; /* for parallel programming */
size = 4096;
min_write_delay = 9000;
max_write_delay = 9000;
readback_p1 = 0xff;
readback_p2 = 0xff;
read = " 1 0 1 0 0 0 0 0",
" 0 0 x x a11 a10 a9 a8",
" a7 a6 a5 a4 a3 a2 a1 a0",
" o o o o o o o o";
write = " 1 1 0 0 0 0 0 0",
" 0 0 x x a11 a10 a9 a8",
" a7 a6 a5 a4 a3 a2 a1 a0",
" i i i i i i i i";
loadpage_lo = " 1 1 0 0 0 0 0 1",
" 0 0 0 0 0 0 0 0",
" 0 0 0 0 0 a2 a1 a0",
" i i i i i i i i";
writepage = " 1 1 0 0 0 0 1 0",
" 0 0 x x a11 a10 a9 a8",
" a7 a6 a5 a4 a3 0 0 0",
" x x x x x x x x";
mode = 0x41;
delay = 10;
blocksize = 128;
readsize = 256;
;
memory "flash"
paged = yes;
size = 131072;
page_size = 256;
num_pages = 512;
min_write_delay = 4500;
max_write_delay = 4500;
readback_p1 = 0xff;
readback_p2 = 0xff;
read_lo = " 0 0 1 0 0 0 0 0",
"a15 a14 a13 a12 a11 a10 a9 a8",
" a7 a6 a5 a4 a3 a2 a1 a0",
" o o o o o o o o";
read_hi = " 0 0 1 0 1 0 0 0",
"a15 a14 a13 a12 a11 a10 a9 a8",
" a7 a6 a5 a4 a3 a2 a1 a0",
" o o o o o o o o";
loadpage_lo = " 0 1 0 0 0 0 0 0",
" 0 0 x x x x x x",
" x a6 a5 a4 a3 a2 a1 a0",
" i i i i i i i i";
loadpage_hi = " 0 1 0 0 1 0 0 0",
" 0 0 x x x x x x",
" x a6 a5 a4 a3 a2 a1 a0",
" i i i i i i i i";
writepage = " 0 1 0 0 1 1 0 0",
"a15 a14 a13 a12 a11 a10 a9 a8",
" a7 x x x x x x x",
" x x x x x x x x";
mode = 0x41;
delay = 10;
blocksize = 256;
readsize = 256;
;
memory "lock"
size = 1;
read = "0 1 0 1 1 0 0 0 0 0 0 0 0 0 0 0",
"x x x x x x x x x x o o o o o o";
write = "1 0 1 0 1 1 0 0 1 1 1 x x x x x",
"x x x x x x x x 1 1 i i i i i i";
min_write_delay = 9000;
max_write_delay = 9000;
;
memory "lfuse"
size = 1;
read = "0 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0",
"x x x x x x x x o o o o o o o o";
write = "1 0 1 0 1 1 0 0 1 0 1 0 0 0 0 0",
"x x x x x x x x i i i i i i i i";
min_write_delay = 9000;
max_write_delay = 9000;
;
memory "hfuse"
size = 1;
read = "0 1 0 1 1 0 0 0 0 0 0 0 1 0 0 0",
"x x x x x x x x o o o o o o o o";
write = "1 0 1 0 1 1 0 0 1 0 1 0 1 0 0 0",
"x x x x x x x x i i i i i i i i";
min_write_delay = 9000;
max_write_delay = 9000;
;
memory "efuse"
size = 1;
read = "0 1 0 1 0 0 0 0 0 0 0 0 1 0 0 0",
"x x x x x x x x o o o o o o o o";
write = "1 0 1 0 1 1 0 0 1 0 1 0 0 1 0 0",
"x x x x x x x x 1 1 1 1 1 i i i";
min_write_delay = 9000;
max_write_delay = 9000;
;
memory "signature"
size = 3;
read = "0 0 1 1 0 0 0 0 x x x x x x x x",
"x x x x x x a1 a0 o o o o o o o o";
;
memory "calibration"
size = 1;
read = "0 0 1 1 1 0 0 0 0 0 0 x x x x x",
"0 0 0 0 0 0 0 0 o o o o o o o o";
;
;
#------------------------------------------------------------
# ATmega162
#------------------------------------------------------------
part
id = "m162";
desc = "ATmega162";
has_jtag = yes;
stk500_devcode = 0x83;
avr910_devcode = 0x63;
signature = 0x1e 0x94 0x04;
chip_erase_delay = 9000;
pagel = 0xd7;
bs2 = 0xa0;
idr = 0x04;
spmcr = 0x57;
allowfullpagebitstream = yes;
pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1",
"x x x x x x x x x x x x x x x x";
chip_erase = "1 0 1 0 1 1 0 0 1 0 0 x x x x x",
"x x x x x x x x x x x x x x x x";
ocdrev = 2;
memory "flash"
paged = yes;
size = 16384;
page_size = 128;
num_pages = 128;
min_write_delay = 4500;
max_write_delay = 4500;
readback_p1 = 0xff;
readback_p2 = 0xff;
read_lo = " 0 0 1 0 0 0 0 0",
" 0 0 a13 a12 a11 a10 a9 a8",
" a7 a6 a5 a4 a3 a2 a1 a0",
" o o o o o o o o";
read_hi = " 0 0 1 0 1 0 0 0",
" 0 0 a13 a12 a11 a10 a9 a8",
" a7 a6 a5 a4 a3 a2 a1 a0",
" o o o o o o o o";
loadpage_lo = " 0 1 0 0 0 0 0 0",
" 0 0 x x x x x x",
" x x a5 a4 a3 a2 a1 a0",
" i i i i i i i i";
loadpage_hi = " 0 1 0 0 1 0 0 0",
" 0 0 x x x x x x",
" x x a5 a4 a3 a2 a1 a0",
" i i i i i i i i";
writepage = " 0 1 0 0 1 1 0 0",
" 0 0 a13 a12 a11 a10 a9 a8",
" a7 a6 x x x x x x",
" x x x x x x x x";
mode = 0x41;
delay = 10;
blocksize = 128;
readsize = 256;
;
timeout = 200;
stabdelay = 100;
cmdexedelay = 25;
synchloops = 32;
bytedelay = 0;
pollindex = 3;
pollvalue = 0x53;
predelay = 1;
postdelay = 1;
pollmethod = 0;
pp_controlstack =
0x0E, 0x1E, 0x0F, 0x1F, 0x2E, 0x3E, 0x2F, 0x3F,
0x4E, 0x5E, 0x4F, 0x5F, 0x6E, 0x7E, 0x6F, 0x7F,
0x66, 0x76, 0x67, 0x77, 0x6A, 0x7A, 0x6B, 0x7B,
0xBE, 0xFD, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00;
hventerstabdelay = 100;
progmodedelay = 0;
latchcycles = 6;
togglevtg = 0;
poweroffdelay = 0;
resetdelayms = 0;
resetdelayus = 0;
hvleavestabdelay = 15;
chiperasepulsewidth = 0;
chiperasepolltimeout = 10;
programfusepulsewidth = 0;
programfusepolltimeout = 5;
programlockpulsewidth = 0;
programlockpolltimeout = 5;
memory "eeprom"
paged = no; /* leave this "no" */
page_size = 4; /* for parallel programming */
size = 512;
min_write_delay = 9000;
max_write_delay = 9000;
readback_p1 = 0xff;
readback_p2 = 0xff;
read = " 1 0 1 0 0 0 0 0",
" 0 0 x x x x a9 a8",
" a7 a6 a5 a4 a3 a2 a1 a0",
" o o o o o o o o";
write = " 1 1 0 0 0 0 0 0",
" 0 0 x x x x a9 a8",
" a7 a6 a5 a4 a3 a2 a1 a0",
" i i i i i i i i";
loadpage_lo = " 1 1 0 0 0 0 0 1",
" 0 0 0 0 0 0 0 0",
" 0 0 0 0 0 0 a1 a0",
" i i i i i i i i";
writepage = " 1 1 0 0 0 0 1 0",
" 0 0 x x x x a9 a8",
" a7 a6 a5 a4 a3 a2 0 0",
" x x x x x x x x";
mode = 0x41;
delay = 20;
blocksize = 4;
readsize = 256;
;
memory "lfuse"
size = 1;
min_write_delay = 16000;
max_write_delay = 16000;
read = "0 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0",
"x x x x x x x x o o o o o o o o";
write = "1 0 1 0 1 1 0 0 1 0 1 0 0 0 0 0",
"x x x x x x x x i i i i i i i i";
;
memory "hfuse"
size = 1;
min_write_delay = 16000;
max_write_delay = 16000;
read = "0 1 0 1 1 0 0 0 0 0 0 0 1 0 0 0",
"x x x x x x x x o o o o o o o o";
write = "1 0 1 0 1 1 0 0 1 0 1 0 1 0 0 0",
"x x x x x x x x i i i i i i i i";
;
memory "efuse"
size = 1;
min_write_delay = 16000;
max_write_delay = 16000;
read = "0 1 0 1 0 0 0 0 0 0 0 0 1 0 0 0",
"x x x x x x x x o o o o o o o o";
write = "1 0 1 0 1 1 0 0 1 0 1 0 0 1 0 0",
"x x x x x x x x 1 1 1 1 1 i i i";
;
memory "lock"
size = 1;
min_write_delay = 16000;
max_write_delay = 16000;
read = "0 1 0 1 1 0 0 0 0 0 0 0 0 0 0 0",
"x x x x x x x x x x o o o o o o";
write = "1 0 1 0 1 1 0 0 1 1 1 x x x x x",
"x x x x x x x x 1 1 i i i i i i";
;
memory "signature"
size = 3;
read = "0 0 1 1 0 0 0 0 0 0 x x x x x x",
"x x x x x x a1 a0 o o o o o o o o";
;
memory "calibration"
size = 1;
read = "0 0 1 1 1 0 0 0 0 0 x x x x x x",
"0 0 0 0 0 0 0 0 o o o o o o o o";
;
;
#------------------------------------------------------------
# ATmega163
#------------------------------------------------------------
part
id = "m163";
desc = "ATmega163";
stk500_devcode = 0x81;
avr910_devcode = 0x64;
signature = 0x1e 0x94 0x02;
chip_erase_delay = 32000;
pagel = 0xd7;
bs2 = 0xa0;
pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1",
"x x x x x x x x x x x x x x x x";
chip_erase = "1 0 1 0 1 1 0 0 1 0 0 0 0 0 0 0",
"x x x x x x x x x x x x x x x x";
timeout = 200;
stabdelay = 100;
cmdexedelay = 25;
synchloops = 32;
bytedelay = 0;
pollindex = 3;
pollvalue = 0x53;
predelay = 1;
postdelay = 1;
pollmethod = 0;
pp_controlstack =
0x0E, 0x1E, 0x0F, 0x1F, 0x2E, 0x3E, 0x2F, 0x3F,
0x4E, 0x5E, 0x4F, 0x5F, 0x6E, 0x7E, 0x6F, 0x7F,
0x66, 0x76, 0x67, 0x77, 0x6A, 0x7A, 0x6B, 0x7B,
0xBE, 0xFD, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00;
hventerstabdelay = 100;
progmodedelay = 0;
latchcycles = 0;
togglevtg = 0;
poweroffdelay = 0;
resetdelayms = 0;
resetdelayus = 0;
hvleavestabdelay = 15;
chiperasepulsewidth = 0;
chiperasepolltimeout = 30;
programfusepulsewidth = 0;
programfusepolltimeout = 2;
programlockpulsewidth = 0;
programlockpolltimeout = 2;
memory "eeprom"
size = 512;
min_write_delay = 4000;
max_write_delay = 4000;
readback_p1 = 0xff;
readback_p2 = 0xff;
read = " 1 0 1 0 0 0 0 0",
" x x x x x x x a8",
" a7 a6 a5 a4 a3 a2 a1 a0",
" o o o o o o o o";
write = " 1 1 0 0 0 0 0 0",
" x x x x x x x a8",
" a7 a6 a5 a4 a3 a2 a1 a0",
" i i i i i i i i";
mode = 0x41;
delay = 20;
blocksize = 4;
readsize = 256;
;
memory "flash"
paged = yes;
size = 16384;
page_size = 128;
num_pages = 128;
min_write_delay = 16000;
max_write_delay = 16000;
readback_p1 = 0xff;
readback_p2 = 0xff;
read_lo = " 0 0 1 0 0 0 0 0",
" x x x a12 a11 a10 a9 a8",
" a7 a6 a5 a4 a3 a2 a1 a0",
" o o o o o o o o";
read_hi = " 0 0 1 0 1 0 0 0",
" x x x a12 a11 a10 a9 a8",
" a7 a6 a5 a4 a3 a2 a1 a0",
" o o o o o o o o";
loadpage_lo = " 0 1 0 0 0 0 0 0",
" x x x x x x x x",
" x x a5 a4 a3 a2 a1 a0",
" i i i i i i i i";
loadpage_hi = " 0 1 0 0 1 0 0 0",
" x x x x x x x x",
" x x a5 a4 a3 a2 a1 a0",
" i i i i i i i i";
writepage = " 0 1 0 0 1 1 0 0",
" x x x a12 a11 a10 a9 a8",
" a7 a6 x x x x x x",
" x x x x x x x x";
mode = 0x11;
delay = 20;
blocksize = 128;
readsize = 256;
;
memory "lfuse"
size = 1;
min_write_delay = 2000;
max_write_delay = 2000;
read = "0 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0",
"x x x x x x x x o o x x o o o o";
write = "1 0 1 0 1 1 0 0 1 0 1 0 0 0 0 0",
"x x x x x x x x i i 1 1 i i i i";
;
memory "hfuse"
size = 1;
min_write_delay = 2000;
max_write_delay = 2000;
read = "0 1 0 1 1 0 0 0 0 0 0 0 1 0 0 0",
"x x x x x x x x x x x x 1 o o o";
write = "1 0 1 0 1 1 0 0 1 0 1 0 1 0 0 0",
"x x x x x x x x 1 1 1 1 1 i i i";
;
memory "lock"
size = 1;
min_write_delay = 2000;
max_write_delay = 2000;
read = "0 1 0 1 1 0 0 0 0 0 0 0 0 0 0 0",
"x x x x 0 x x x x x o o o o o o";
write = "1 0 1 0 1 1 0 0 1 1 1 x x x x x",
"x x x x x x x x 1 1 i i i i i i";
;
memory "signature"
size = 3;
read = "0 0 1 1 0 0 0 0 x x x x x x x x",
"x x x x x x a1 a0 o o o o o o o o";
;
memory "calibration"
size = 1;
read = "0 0 1 1 1 0 0 0 x x x x x x x x",
"0 0 0 0 0 0 0 0 o o o o o o o o";
;
;
#------------------------------------------------------------
# ATmega169
#------------------------------------------------------------
part
id = "m169";
desc = "ATmega169";
has_jtag = yes;
stk500_devcode = 0x85;
avr910_devcode = 0x78;
signature = 0x1e 0x94 0x05;
chip_erase_delay = 9000;
pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1",
"x x x x x x x x x x x x x x x x";
chip_erase = "1 0 1 0 1 1 0 0 1 0 0 0 0 0 0 0",
"x x x x x x x x x x x x x x x x";
timeout = 200;
stabdelay = 100;
cmdexedelay = 25;
synchloops = 32;
bytedelay = 0;
pollindex = 3;
pollvalue = 0x53;
predelay = 1;
postdelay = 1;
pollmethod = 1;
pp_controlstack =
0x0E, 0x1E, 0x0F, 0x1F, 0x2E, 0x3E, 0x2F, 0x3F,
0x4E, 0x5E, 0x4F, 0x5F, 0x6E, 0x7E, 0x6F, 0x7F,
0x66, 0x76, 0x67, 0x77, 0x6A, 0x7A, 0x6B, 0x7B,
0xBE, 0xFD, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00;
hventerstabdelay = 100;
progmodedelay = 0;
latchcycles = 5;
togglevtg = 1;
poweroffdelay = 15;
resetdelayms = 1;
resetdelayus = 0;
hvleavestabdelay = 15;
chiperasepulsewidth = 0;
chiperasepolltimeout = 10;
programfusepulsewidth = 0;
programfusepolltimeout = 5;
programlockpulsewidth = 0;
programlockpolltimeout = 5;
idr = 0x31;
spmcr = 0x57;
ocdrev = 2;
memory "eeprom"
paged = no; /* leave this "no" */
page_size = 4; /* for parallel programming */
size = 512;
min_write_delay = 9000;
max_write_delay = 9000;
readback_p1 = 0xff;
readback_p2 = 0xff;
read = " 1 0 1 0 0 0 0 0",
" x x x x x x x a8",
" a7 a6 a5 a4 a3 a2 a1 a0",
" o o o o o o o o";
write = " 1 1 0 0 0 0 0 0",
" x x x x x x x a8",
" a7 a6 a5 a4 a3 a2 a1 a0",
" i i i i i i i i";
loadpage_lo = " 1 1 0 0 0 0 0 1",
" 0 0 0 0 0 0 0 0",
" 0 0 0 0 0 0 a1 a0",
" i i i i i i i i";
writepage = " 1 1 0 0 0 0 1 0",
" 0 0 x x x x x a8",
" a7 a6 a5 a4 a3 a2 0 0",
" x x x x x x x x";
mode = 0x41;
delay = 20;
blocksize = 4;
readsize = 256;
;
memory "flash"
paged = yes;
size = 16384;
page_size = 128;
num_pages = 128;
min_write_delay = 4500;
max_write_delay = 4500;
readback_p1 = 0xff;
readback_p2 = 0xff;
read_lo = " 0 0 1 0 0 0 0 0",
" x x x a12 a11 a10 a9 a8",
" a7 a6 a5 a4 a3 a2 a1 a0",
" o o o o o o o o";
read_hi = " 0 0 1 0 1 0 0 0",
" x x x a12 a11 a10 a9 a8",
" a7 a6 a5 a4 a3 a2 a1 a0",
" o o o o o o o o";
loadpage_lo = " 0 1 0 0 0 0 0 0",
" x x x x x x x x",
" x x a5 a4 a3 a2 a1 a0",
" i i i i i i i i";
loadpage_hi = " 0 1 0 0 1 0 0 0",
" x x x x x x x x",
" x x a5 a4 a3 a2 a1 a0",
" i i i i i i i i";
writepage = " 0 1 0 0 1 1 0 0",
" x x x a12 a11 a10 a9 a8",
" a7 a6 x x x x x x",
" x x x x x x x x";
mode = 0x41;
delay = 6;
blocksize = 128;
readsize = 256;
;
memory "lfuse"
size = 1;
min_write_delay = 2000;
max_write_delay = 2000;
read = "0 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0",
"x x x x x x x x o o o o o o o o";
write = "1 0 1 0 1 1 0 0 1 0 1 0 0 0 0 0",
"x x x x x x x x i i i i i i i i";
;
memory "hfuse"
size = 1;
min_write_delay = 2000;
max_write_delay = 2000;
read = "0 1 0 1 1 0 0 0 0 0 0 0 1 0 0 0",
"x x x x x x x x o o o o o o o o";
write = "1 0 1 0 1 1 0 0 1 0 1 0 1 0 0 0",
"x x x x x x x x i i i i i i i i";
;
memory "efuse"
size = 1;
write = "1 0 1 0 1 1 0 0 1 0 1 0 0 1 0 0",
"x x x x x x x x x x x x i i i i";
read = "0 1 0 1 0 0 0 0 0 0 0 0 1 0 0 0",
"x x x x x x x x o o o o o o o o";
;
memory "lock"
size = 1;
min_write_delay = 2000;
max_write_delay = 2000;
read = "0 1 0 1 1 0 0 0 0 0 0 0 0 0 0 0",
"x x x x x x x x x x o o o o o o";
write = "1 0 1 0 1 1 0 0 1 1 1 x x x x x",
"x x x x x x x x 1 1 i i i i i i";
;
memory "signature"
size = 3;
read = "0 0 1 1 0 0 0 0 0 0 0 x x x x x",
"x x x x x x a1 a0 o o o o o o o o";
;
memory "calibration"
size = 1;
read = "0 0 1 1 1 0 0 0 0 0 0 x x x x x",
"0 0 0 0 0 0 0 0 o o o o o o o o";
;
;
#------------------------------------------------------------
# ATmega329
#------------------------------------------------------------
part
id = "m329";
desc = "ATmega329";
has_jtag = yes;
# stk500_devcode = 0x85; # no STK500 support, only STK500v2
# avr910_devcode = 0x?; # try the ATmega169 one:
avr910_devcode = 0x75;
signature = 0x1e 0x95 0x03;
chip_erase_delay = 9000;
pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1",
"x x x x x x x x x x x x x x x x";
chip_erase = "1 0 1 0 1 1 0 0 1 0 0 0 0 0 0 0",
"x x x x x x x x x x x x x x x x";
timeout = 200;
stabdelay = 100;
cmdexedelay = 25;
synchloops = 32;
bytedelay = 0;
pollindex = 3;
pollvalue = 0x53;
predelay = 1;
postdelay = 1;
pollmethod = 1;
pp_controlstack =
0x0E, 0x1E, 0x0F, 0x1F, 0x2E, 0x3E, 0x2F, 0x3F,
0x4E, 0x5E, 0x4F, 0x5F, 0x6E, 0x7E, 0x6F, 0x7F,
0x66, 0x76, 0x67, 0x77, 0x6A, 0x7A, 0x6B, 0x7B,
0xBE, 0xFD, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00;
hventerstabdelay = 100;
progmodedelay = 0;
latchcycles = 5;
togglevtg = 1;
poweroffdelay = 15;
resetdelayms = 1;
resetdelayus = 0;
hvleavestabdelay = 15;
chiperasepulsewidth = 0;
chiperasepolltimeout = 10;
programfusepulsewidth = 0;
programfusepolltimeout = 5;
programlockpulsewidth = 0;
programlockpolltimeout = 5;
idr = 0x31;
spmcr = 0x57;
ocdrev = 3;
memory "eeprom"
paged = no; /* leave this "no" */
page_size = 4; /* for parallel programming */
size = 1024;
min_write_delay = 9000;
max_write_delay = 9000;
readback_p1 = 0xff;
readback_p2 = 0xff;
read = " 1 0 1 0 0 0 0 0",
" x x x x x x a9 a8",
" a7 a6 a5 a4 a3 a2 a1 a0",
" o o o o o o o o";
write = " 1 1 0 0 0 0 0 0",
" x x x x x x a9 a8",
" a7 a6 a5 a4 a3 a2 a1 a0",
" i i i i i i i i";
loadpage_lo = " 1 1 0 0 0 0 0 1",
" 0 0 0 0 0 0 0 0",
" 0 0 0 0 0 0 a1 a0",
" i i i i i i i i";
writepage = " 1 1 0 0 0 0 1 0",
" 0 0 x x x x a9 a8",
" a7 a6 a5 a4 a3 a2 0 0",
" x x x x x x x x";
mode = 0x41;
delay = 20;
blocksize = 8;
readsize = 256;
;
memory "flash"
paged = yes;
size = 32768;
page_size = 128;
num_pages = 256;
min_write_delay = 4500;
max_write_delay = 4500;
readback_p1 = 0xff;
readback_p2 = 0xff;
read_lo = " 0 0 1 0 0 0 0 0",
" x a14 a13 a12 a11 a10 a9 a8",
" a7 a6 a5 a4 a3 a2 a1 a0",
" o o o o o o o o";
read_hi = " 0 0 1 0 1 0 0 0",
" x a14 a13 a12 a11 a10 a9 a8",
" a7 a6 a5 a4 a3 a2 a1 a0",
" o o o o o o o o";
loadpage_lo = " 0 1 0 0 0 0 0 0",
" x x x x x x x x",
" x x a5 a4 a3 a2 a1 a0",
" i i i i i i i i";
loadpage_hi = " 0 1 0 0 1 0 0 0",
" x x x x x x x x",
" x x a5 a4 a3 a2 a1 a0",
" i i i i i i i i";
writepage = " 0 1 0 0 1 1 0 0",
" x x x a12 a11 a10 a9 a8",
" a7 a6 x x x x x x",
" x x x x x x x x";
mode = 0x41;
delay = 6;
blocksize = 256;
readsize = 256;
;
memory "lfuse"
size = 1;
min_write_delay = 4500;
max_write_delay = 4500;
read = "0 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0",
"x x x x x x x x o o o o o o o o";
write = "1 0 1 0 1 1 0 0 1 0 1 0 0 0 0 0",
"x x x x x x x x i i i i i i i i";
;
memory "hfuse"
size = 1;
min_write_delay = 4500;
max_write_delay = 4500;
read = "0 1 0 1 1 0 0 0 0 0 0 0 1 0 0 0",
"x x x x x x x x o o o o o o o o";
write = "1 0 1 0 1 1 0 0 1 0 1 0 1 0 0 0",
"x x x x x x x x i i i i i i i i";
;
memory "efuse"
size = 1;
min_write_delay = 4500;
max_write_delay = 4500;
read = "0 1 0 1 0 0 0 0 0 0 0 0 1 0 0 0",
"x x x x x x x x o o o o o o o o";
write = "1 0 1 0 1 1 0 0 1 0 1 0 0 1 0 0",
"x x x x x x x x x x x x x i i i";
;
memory "lock"
size = 1;
min_write_delay = 4500;
max_write_delay = 4500;
read = "0 1 0 1 1 0 0 0 0 0 0 0 0 0 0 0",
"x x x x x x x x x x o o o o o o";
write = "1 0 1 0 1 1 0 0 1 1 1 x x x x x",
"x x x x x x x x 1 1 i i i i i i";
;
memory "signature"
size = 3;
read = "0 0 1 1 0 0 0 0 0 0 0 x x x x x",
"x x x x x x a1 a0 o o o o o o o o";
;
memory "calibration"
size = 1;
read = "0 0 1 1 1 0 0 0 0 0 0 x x x x x",
"0 0 0 0 0 0 0 0 o o o o o o o o";
;
;
#------------------------------------------------------------
# ATmega329P
#------------------------------------------------------------
# Identical to ATmega329 except of the signature
part parent "m329"
id = "m329p";
desc = "ATmega329P";
signature = 0x1e 0x95 0x0b;
ocdrev = 3;
;
#------------------------------------------------------------
# ATmega3290
#------------------------------------------------------------
# identical to ATmega329
part parent "m329"
id = "m3290";
desc = "ATmega3290";
signature = 0x1e 0x95 0x04;
ocdrev = 3;
;
#------------------------------------------------------------
# ATmega3290P
#------------------------------------------------------------
# identical to ATmega3290 except of the signature
part parent "m3290"
id = "m3290p";
desc = "ATmega3290P";
signature = 0x1e 0x95 0x0c;
ocdrev = 3;
;
#------------------------------------------------------------
# ATmega649
#------------------------------------------------------------
part
id = "m649";
desc = "ATmega649";
has_jtag = yes;
# stk500_devcode = 0x85; # no STK500 support, only STK500v2
# avr910_devcode = 0x?; # try the ATmega169 one:
avr910_devcode = 0x75;
signature = 0x1e 0x96 0x03;
chip_erase_delay = 9000;
pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1",
"x x x x x x x x x x x x x x x x";
chip_erase = "1 0 1 0 1 1 0 0 1 0 0 0 0 0 0 0",
"x x x x x x x x x x x x x x x x";
timeout = 200;
stabdelay = 100;
cmdexedelay = 25;
synchloops = 32;
bytedelay = 0;
pollindex = 3;
pollvalue = 0x53;
predelay = 1;
postdelay = 1;
pollmethod = 1;
pp_controlstack =
0x0E, 0x1E, 0x0F, 0x1F, 0x2E, 0x3E, 0x2F, 0x3F,
0x4E, 0x5E, 0x4F, 0x5F, 0x6E, 0x7E, 0x6F, 0x7F,
0x66, 0x76, 0x67, 0x77, 0x6A, 0x7A, 0x6B, 0x7B,
0xBE, 0xFD, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00;
hventerstabdelay = 100;
progmodedelay = 0;
latchcycles = 5;
togglevtg = 1;
poweroffdelay = 15;
resetdelayms = 1;
resetdelayus = 0;
hvleavestabdelay = 15;
chiperasepulsewidth = 0;
chiperasepolltimeout = 10;
programfusepulsewidth = 0;
programfusepolltimeout = 5;
programlockpulsewidth = 0;
programlockpolltimeout = 5;
idr = 0x31;
spmcr = 0x57;
ocdrev = 3;
memory "eeprom"
paged = no; /* leave this "no" */
page_size = 8; /* for parallel programming */
size = 2048;
min_write_delay = 9000;
max_write_delay = 9000;
readback_p1 = 0xff;
readback_p2 = 0xff;
read = " 1 0 1 0 0 0 0 0",
" x x x x x a10 a9 a8",
" a7 a6 a5 a4 a3 a2 a1 a0",
" o o o o o o o o";
write = " 1 1 0 0 0 0 0 0",
" x x x x x a10 a9 a8",
" a7 a6 a5 a4 a3 a2 a1 a0",
" i i i i i i i i";
loadpage_lo = " 1 1 0 0 0 0 0 1",
" 0 0 0 0 0 0 0 0",
" 0 0 0 0 0 a2 a1 a0",
" i i i i i i i i";
writepage = " 1 1 0 0 0 0 1 0",
" 0 0 x x x a10 a9 a8",
" a7 a6 a5 a4 a3 0 0 0",
" x x x x x x x x";
mode = 0x41;
delay = 20;
blocksize = 8;
readsize = 256;
;
memory "flash"
paged = yes;
size = 65536;
page_size = 256;
num_pages = 256;
min_write_delay = 4500;
max_write_delay = 4500;
readback_p1 = 0xff;
readback_p2 = 0xff;
read_lo = " 0 0 1 0 0 0 0 0",
"a15 a14 a13 a12 a11 a10 a9 a8",
" a7 a6 a5 a4 a3 a2 a1 a0",
" o o o o o o o o";
read_hi = " 0 0 1 0 1 0 0 0",
"a15 a14 a13 a12 a11 a10 a9 a8",
" a7 a6 a5 a4 a3 a2 a1 a0",
" o o o o o o o o";
loadpage_lo = " 0 1 0 0 0 0 0 0",
" x x x x x x x x",
" x a6 a5 a4 a3 a2 a1 a0",
" i i i i i i i i";
loadpage_hi = " 0 1 0 0 1 0 0 0",
" x x x x x x x x",
" x a6 a5 a4 a3 a2 a1 a0",
" i i i i i i i i";
writepage = " 0 1 0 0 1 1 0 0",
" x x x a12 a11 a10 a9 a8",
" a7 x x x x x x x",
" x x x x x x x x";
mode = 0x41;
delay = 6;
blocksize = 256;
readsize = 256;
;
memory "lfuse"
size = 1;
min_write_delay = 4500;
max_write_delay = 4500;
read = "0 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0",
"x x x x x x x x o o o o o o o o";
write = "1 0 1 0 1 1 0 0 1 0 1 0 0 0 0 0",
"x x x x x x x x i i i i i i i i";
;
memory "hfuse"
size = 1;
min_write_delay = 4500;
max_write_delay = 4500;
read = "0 1 0 1 1 0 0 0 0 0 0 0 1 0 0 0",
"x x x x x x x x o o o o o o o o";
write = "1 0 1 0 1 1 0 0 1 0 1 0 1 0 0 0",
"x x x x x x x x i i i i i i i i";
;
memory "efuse"
size = 1;
min_write_delay = 4500;
max_write_delay = 4500;
read = "0 1 0 1 0 0 0 0 0 0 0 0 1 0 0 0",
"x x x x x x x x o o o o o o o o";
write = "1 0 1 0 1 1 0 0 1 0 1 0 0 1 0 0",
"x x x x x x x x x x x x x i i i";
;
memory "lock"
size = 1;
min_write_delay = 4500;
max_write_delay = 4500;
read = "0 1 0 1 1 0 0 0 0 0 0 0 0 0 0 0",
"x x x x x x x x x x o o o o o o";
write = "1 0 1 0 1 1 0 0 1 1 1 x x x x x",
"x x x x x x x x 1 1 i i i i i i";
;
memory "signature"
size = 3;
read = "0 0 1 1 0 0 0 0 0 0 0 x x x x x",
"x x x x x x a1 a0 o o o o o o o o";
;
memory "calibration"
size = 1;
read = "0 0 1 1 1 0 0 0 0 0 0 x x x x x",
"0 0 0 0 0 0 0 0 o o o o o o o o";
;
;
#------------------------------------------------------------
# ATmega6490
#------------------------------------------------------------
# identical to ATmega649
part parent "m649"
id = "m6490";
desc = "ATmega6490";
signature = 0x1e 0x96 0x04;
ocdrev = 3;
;
#------------------------------------------------------------
# ATmega32
#------------------------------------------------------------
part
id = "m32";
desc = "ATmega32";
has_jtag = yes;
stk500_devcode = 0x91;
avr910_devcode = 0x72;
signature = 0x1e 0x95 0x02;
chip_erase_delay = 9000;
pagel = 0xd7;
bs2 = 0xa0;
reset = dedicated;
pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1",
"x x x x x x x x x x x x x x x x";
chip_erase = "1 0 1 0 1 1 0 0 1 0 0 0 0 0 0 0",
"x x x x x x x x x x x x x x x x";
timeout = 200;
stabdelay = 100;
cmdexedelay = 25;
synchloops = 32;
bytedelay = 0;
pollindex = 3;
pollvalue = 0x53;
predelay = 1;
postdelay = 1;
pollmethod = 0;
pp_controlstack =
0x0E, 0x1E, 0x0F, 0x1F, 0x2E, 0x3E, 0x2F, 0x3F,
0x4E, 0x5E, 0x4F, 0x5F, 0x6E, 0x7E, 0x6F, 0x7F,
0x66, 0x76, 0x67, 0x77, 0x6A, 0x7A, 0x6B, 0x7B,
0xBE, 0xFD, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00;
hventerstabdelay = 100;
progmodedelay = 0;
latchcycles = 6;
togglevtg = 0;
poweroffdelay = 0;
resetdelayms = 0;
resetdelayus = 0;
hvleavestabdelay = 15;
chiperasepulsewidth = 0;
chiperasepolltimeout = 10;
programfusepulsewidth = 0;
programfusepolltimeout = 5;
programlockpulsewidth = 0;
programlockpolltimeout = 5;
idr = 0x31;
spmcr = 0x57;
allowfullpagebitstream = yes;
ocdrev = 2;
memory "eeprom"
paged = no; /* leave this "no" */
page_size = 4; /* for parallel programming */
size = 1024;
min_write_delay = 9000;
max_write_delay = 9000;
readback_p1 = 0xff;
readback_p2 = 0xff;
read = " 1 0 1 0 0 0 0 0",
" 0 0 x x x x a9 a8",
" a7 a6 a5 a4 a3 a2 a1 a0",
" o o o o o o o o";
write = " 1 1 0 0 0 0 0 0",
" 0 0 x x x x a9 a8",
" a7 a6 a5 a4 a3 a2 a1 a0",
" i i i i i i i i";
loadpage_lo = " 1 1 0 0 0 0 0 1",
" 0 0 0 0 0 0 0 0",
" 0 0 0 0 0 0 a1 a0",
" i i i i i i i i";
writepage = " 1 1 0 0 0 0 1 0",
" 0 0 x x x x a9 a8",
" a7 a6 a5 a4 a3 a2 0 0",
" x x x x x x x x";
mode = 0x04;
delay = 10;
blocksize = 64;
readsize = 256;
;
memory "flash"
paged = yes;
size = 32768;
page_size = 128;
num_pages = 256;
min_write_delay = 4500;
max_write_delay = 4500;
readback_p1 = 0xff;
readback_p2 = 0xff;
read_lo = " 0 0 1 0 0 0 0 0",
" 0 0 a13 a12 a11 a10 a9 a8",
" a7 a6 a5 a4 a3 a2 a1 a0",
" o o o o o o o o";
read_hi = " 0 0 1 0 1 0 0 0",
" 0 0 a13 a12 a11 a10 a9 a8",
" a7 a6 a5 a4 a3 a2 a1 a0",
" o o o o o o o o";
loadpage_lo = " 0 1 0 0 0 0 0 0",
" 0 0 x x x x x x",
" x x a5 a4 a3 a2 a1 a0",
" i i i i i i i i";
loadpage_hi = " 0 1 0 0 1 0 0 0",
" 0 0 x x x x x x",
" x x a5 a4 a3 a2 a1 a0",
" i i i i i i i i";
writepage = " 0 1 0 0 1 1 0 0",
" 0 0 a13 a12 a11 a10 a9 a8",
" a7 a6 x x x x x x",
" x x x x x x x x";
mode = 0x21;
delay = 6;
blocksize = 64;
readsize = 256;
;
memory "lfuse"
size = 1;
min_write_delay = 2000;
max_write_delay = 2000;
read = "0 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0",
"x x x x x x x x o o o o o o o o";
write = "1 0 1 0 1 1 0 0 1 0 1 0 0 0 0 0",
"x x x x x x x x i i i i i i i i";
;
memory "hfuse"
size = 1;
min_write_delay = 2000;
max_write_delay = 2000;
read = "0 1 0 1 1 0 0 0 0 0 0 0 1 0 0 0",
"x x x x x x x x o o o o o o o o";
write = "1 0 1 0 1 1 0 0 1 0 1 0 1 0 0 0",
"x x x x x x x x i i i i i i i i";
;
memory "lock"
size = 1;
min_write_delay = 2000;
max_write_delay = 2000;
read = "0 1 0 1 1 0 0 0 0 0 0 0 0 0 0 0",
"x x x x x x x x x x o o o o o o";
write = "1 0 1 0 1 1 0 0 1 1 1 x x x x x",
"x x x x x x x x 1 1 i i i i i i";
;
memory "signature"
size = 3;
read = "0 0 1 1 0 0 0 0 x x x x x x x x",
"x x x x x x a1 a0 o o o o o o o o";
;
memory "calibration"
size = 4;
read = "0 0 1 1 1 0 0 0 0 0 x x x x x x",
"0 0 0 0 0 0 a1 a0 o o o o o o o o";
;
;
#------------------------------------------------------------
# ATmega161
#------------------------------------------------------------
part
id = "m161";
desc = "ATmega161";
stk500_devcode = 0x80;
avr910_devcode = 0x60;
signature = 0x1e 0x94 0x01;
chip_erase_delay = 28000;
pagel = 0xd7;
bs2 = 0xa0;
pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1",
"x x x x x x x x x x x x x x x x";
chip_erase = "1 0 1 0 1 1 0 0 1 0 0 0 0 0 0 0",
"x x x x x x x x x x x x x x x x";
timeout = 200;
stabdelay = 100;
cmdexedelay = 25;
synchloops = 32;
bytedelay = 0;
pollindex = 3;
pollvalue = 0x53;
predelay = 1;
postdelay = 1;
pollmethod = 0;
pp_controlstack =
0x0E, 0x1E, 0x0F, 0x1F, 0x2E, 0x3E, 0x2F, 0x3F,
0x4E, 0x5E, 0x4F, 0x5F, 0x6E, 0x7E, 0x6F, 0x7F,
0x66, 0x76, 0x67, 0x77, 0x6A, 0x7A, 0x6B, 0x7B,
0xBE, 0xFD, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00;
hventerstabdelay = 100;
progmodedelay = 0;
latchcycles = 0;
togglevtg = 0;
poweroffdelay = 0;
resetdelayms = 0;
resetdelayus = 0;
hvleavestabdelay = 15;
chiperasepulsewidth = 0;
chiperasepolltimeout = 30;
programfusepulsewidth = 0;
programfusepolltimeout = 2;
programlockpulsewidth = 0;
programlockpolltimeout = 2;
memory "eeprom"
size = 512;
min_write_delay = 3400;
max_write_delay = 3400;
readback_p1 = 0xff;
readback_p2 = 0xff;
read = " 1 0 1 0 0 0 0 0",
" x x x x x x x a8",
" a7 a6 a5 a4 a3 a2 a1 a0",
" o o o o o o o o";
write = " 1 1 0 0 0 0 0 0",
" x x x x x x x a8",
" a7 a6 a5 a4 a3 a2 a1 a0",
" i i i i i i i i";
mode = 0x04;
delay = 5;
blocksize = 128;
readsize = 256;
;
memory "flash"
paged = yes;
size = 16384;
page_size = 128;
num_pages = 128;
min_write_delay = 14000;
max_write_delay = 14000;
readback_p1 = 0xff;
readback_p2 = 0xff;
read_lo = " 0 0 1 0 0 0 0 0",
" x x x a12 a11 a10 a9 a8",
" a7 a6 a5 a4 a3 a2 a1 a0",
" o o o o o o o o";
read_hi = " 0 0 1 0 1 0 0 0",
" x x x a12 a11 a10 a9 a8",
" a7 a6 a5 a4 a3 a2 a1 a0",
" o o o o o o o o";
loadpage_lo = " 0 1 0 0 0 0 0 0",
" x x x x x x x x",
" x x a5 a4 a3 a2 a1 a0",
" i i i i i i i i";
loadpage_hi = " 0 1 0 0 1 0 0 0",
" x x x x x x x x",
" x x a5 a4 a3 a2 a1 a0",
" i i i i i i i i";
writepage = " 0 1 0 0 1 1 0 0",
" x x x a12 a11 a10 a9 a8",
" a7 a6 x x x x x x",
" x x x x x x x x";
mode = 0x21;
delay = 16;
blocksize = 128;
readsize = 256;
;
memory "fuse"
size = 1;
min_write_delay = 2000;
max_write_delay = 2000;
read = "0 1 0 1 0 0 0 0 x x x x x x x x",
"x x x x x x x x x o x o o o o o";
write = "1 0 1 0 1 1 0 0 1 0 1 x x x x x",
"x x x x x x x x 1 i 1 i i i i i";
;
memory "lock"
size = 1;
min_write_delay = 2000;
max_write_delay = 2000;
read = "0 1 0 1 1 0 0 0 0 0 0 0 0 0 0 0",
"x x x x x x x x x x o o o o o o";
write = "1 0 1 0 1 1 0 0 1 1 1 x x x x x",
"x x x x x x x x 1 1 i i i i i i";
;
memory "signature"
size = 3;
read = "0 0 1 1 0 0 0 0 x x x x x x x x",
"x x x x x x a1 a0 o o o o o o o o";
;
;
#------------------------------------------------------------
# ATmega8
#------------------------------------------------------------
part
id = "m8";
desc = "ATmega8";
stk500_devcode = 0x70;
avr910_devcode = 0x76;
signature = 0x1e 0x93 0x07;
pagel = 0xd7;
bs2 = 0xc2;
chip_erase_delay = 10000;
pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1",
"x x x x x x x x x x x x x x x x";
chip_erase = "1 0 1 0 1 1 0 0 1 0 0 x x x x x",
"x x x x x x x x x x x x x x x x";
timeout = 200;
stabdelay = 100;
cmdexedelay = 25;
synchloops = 32;
bytedelay = 0;
pollindex = 3;
pollvalue = 0x53;
predelay = 1;
postdelay = 1;
pollmethod = 0;
pp_controlstack =
0x0E, 0x1E, 0x0F, 0x1F, 0x2E, 0x3E, 0x2F, 0x3F,
0x4E, 0x5E, 0x4F, 0x5F, 0x6E, 0x7E, 0x6F, 0x7F,
0x66, 0x76, 0x67, 0x77, 0x6A, 0x7A, 0x6B, 0x7B,
0xBE, 0xFD, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00;
hventerstabdelay = 100;
progmodedelay = 0;
latchcycles = 5;
togglevtg = 1;
poweroffdelay = 15;
resetdelayms = 2;
resetdelayus = 0;
hvleavestabdelay = 15;
resetdelay = 15;
chiperasepulsewidth = 0;
chiperasepolltimeout = 10;
programfusepulsewidth = 0;
programfusepolltimeout = 5;
programlockpulsewidth = 0;
programlockpolltimeout = 5;
memory "eeprom"
size = 512;
page_size = 4;
min_write_delay = 9000;
max_write_delay = 9000;
readback_p1 = 0xff;
readback_p2 = 0xff;
read = " 1 0 1 0 0 0 0 0",
" 0 0 x x x x x a8",
" a7 a6 a5 a4 a3 a2 a1 a0",
" o o o o o o o o";
write = " 1 1 0 0 0 0 0 0",
" 0 0 x x x x x a8",
" a7 a6 a5 a4 a3 a2 a1 a0",
" i i i i i i i i";
mode = 0x04;
delay = 20;
blocksize = 128;
readsize = 256;
;
memory "flash"
paged = yes;
size = 8192;
page_size = 64;
num_pages = 128;
min_write_delay = 4500;
max_write_delay = 4500;
readback_p1 = 0xff;
readback_p2 = 0x00;
read_lo = " 0 0 1 0 0 0 0 0",
" 0 0 0 0 a11 a10 a9 a8",
" a7 a6 a5 a4 a3 a2 a1 a0",
" o o o o o o o o";
read_hi = " 0 0 1 0 1 0 0 0",
" 0 0 0 0 a11 a10 a9 a8",
" a7 a6 a5 a4 a3 a2 a1 a0",
" o o o o o o o o";
loadpage_lo = " 0 1 0 0 0 0 0 0",
" 0 0 0 0 x x x x",
" x x x a4 a3 a2 a1 a0",
" i i i i i i i i";
loadpage_hi = " 0 1 0 0 1 0 0 0",
" 0 0 0 0 x x x x",
" x x x a4 a3 a2 a1 a0",
" i i i i i i i i";
writepage = " 0 1 0 0 1 1 0 0",
" 0 0 0 0 a11 a10 a9 a8",
" a7 a6 a5 x x x x x",
" x x x x x x x x";
mode = 0x21;
delay = 10;
blocksize = 64;
readsize = 256;
;
memory "lfuse"
size = 1;
min_write_delay = 2000;
max_write_delay = 2000;
read = "0 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0",
"x x x x x x x x o o o o o o o o";
write = "1 0 1 0 1 1 0 0 1 0 1 0 0 0 0 0",
"x x x x x x x x i i i i i i i i";
;
memory "hfuse"
size = 1;
min_write_delay = 2000;
max_write_delay = 2000;
read = "0 1 0 1 1 0 0 0 0 0 0 0 1 0 0 0",
"x x x x x x x x o o o o o o o o";
write = "1 0 1 0 1 1 0 0 1 0 1 0 1 0 0 0",
"x x x x x x x x i i i i i i i i";
;
memory "lock"
size = 1;
min_write_delay = 2000;
max_write_delay = 2000;
read = "0 1 0 1 1 0 0 0 0 0 0 0 0 0 0 0",
"x x x x x x x x x x o o o o o o";
write = "1 0 1 0 1 1 0 0 1 1 1 x x x x x",
"x x x x x x x x 1 1 i i i i i i";
;
memory "calibration"
size = 4;
read = "0 0 1 1 1 0 0 0 0 0 x x x x x x",
"0 0 0 0 0 0 a1 a0 o o o o o o o o";
;
memory "signature"
size = 3;
read = "0 0 1 1 0 0 0 0 x x x x x x x x",
"x x x x x x a1 a0 o o o o o o o o";
;
;
#------------------------------------------------------------
# ATmega8515
#------------------------------------------------------------
part
id = "m8515";
desc = "ATmega8515";
stk500_devcode = 0x63;
avr910_devcode = 0x3A;
signature = 0x1e 0x93 0x06;
chip_erase_delay = 9000;
pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1",
"x x x x x x x x x x x x x x x x";
chip_erase = "1 0 1 0 1 1 0 0 1 0 0 x x x x x",
"x x x x x x x x x x x x x x x x";
timeout = 200;
stabdelay = 100;
cmdexedelay = 25;
synchloops = 32;
bytedelay = 0;
pollindex = 3;
pollvalue = 0x53;
predelay = 1;
postdelay = 1;
pollmethod = 0;
pp_controlstack =
0x0E, 0x1E, 0x0F, 0x1F, 0x2E, 0x3E, 0x2F, 0x3F,
0x4E, 0x5E, 0x4F, 0x5F, 0x6E, 0x7E, 0x6F, 0x7F,
0x66, 0x76, 0x67, 0x77, 0x6A, 0x7A, 0x6B, 0x7B,
0xBE, 0xFD, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00;
hventerstabdelay = 100;
progmodedelay = 0;
latchcycles = 6;
togglevtg = 0;
poweroffdelay = 0;
resetdelayms = 0;
resetdelayus = 0;
hvleavestabdelay = 15;
chiperasepulsewidth = 0;
chiperasepolltimeout = 10;
programfusepulsewidth = 0;
programfusepolltimeout = 5;
programlockpulsewidth = 0;
programlockpolltimeout = 5;
memory "eeprom"
size = 512;
min_write_delay = 9000;
max_write_delay = 9000;
readback_p1 = 0xff;
readback_p2 = 0xff;
read = " 1 0 1 0 0 0 0 0",
" 0 0 x x x x x a8",
" a7 a6 a5 a4 a3 a2 a1 a0",
" o o o o o o o o";
write = " 1 1 0 0 0 0 0 0",
" 0 0 x x x x x a8",
" a7 a6 a5 a4 a3 a2 a1 a0",
" i i i i i i i i";
mode = 0x04;
delay = 20;
blocksize = 128;
readsize = 256;
;
memory "flash"
paged = yes;
size = 8192;
page_size = 64;
num_pages = 128;
min_write_delay = 4500;
max_write_delay = 4500;
readback_p1 = 0xff;
readback_p2 = 0xff;
read_lo = " 0 0 1 0 0 0 0 0",
" 0 0 0 0 a11 a10 a9 a8",
" a7 a6 a5 a4 a3 a2 a1 a0",
" o o o o o o o o";
read_hi = " 0 0 1 0 1 0 0 0",
" 0 0 0 0 a11 a10 a9 a8",
" a7 a6 a5 a4 a3 a2 a1 a0",
" o o o o o o o o";
loadpage_lo = " 0 1 0 0 0 0 0 0",
" 0 0 0 0 x x x x",
" x x x a4 a3 a2 a1 a0",
" i i i i i i i i";
loadpage_hi = " 0 1 0 0 1 0 0 0",
" 0 0 0 0 x x x x",
" x x x a4 a3 a2 a1 a0",
" i i i i i i i i";
writepage = " 0 1 0 0 1 1 0 0",
" 0 0 0 0 a11 a10 a9 a8",
" a7 a6 a5 x x x x x",
" x x x x x x x x";
mode = 0x21;
delay = 6;
blocksize = 64;
readsize = 256;
;
memory "lfuse"
size = 1;
min_write_delay = 4500;
max_write_delay = 4500;
read = "0 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0",
"x x x x x x x x o o o o o o o o";
write = "1 0 1 0 1 1 0 0 1 0 1 0 0 0 0 0",
"x x x x x x x x i i i i i i i i";
;
memory "hfuse"
size = 1;
min_write_delay = 4500;
max_write_delay = 4500;
read = "0 1 0 1 1 0 0 0 0 0 0 0 1 0 0 0",
"x x x x x x x x o o o o o o o o";
write = "1 0 1 0 1 1 0 0 1 0 1 0 1 0 0 0",
"x x x x x x x x i i i i i i i i";
;
memory "lock"
size = 1;
min_write_delay = 4500;
max_write_delay = 4500;
read = "0 1 0 1 1 0 0 0 0 0 0 0 0 0 0 0",
"x x x x x x x x x x o o o o o o";
write = "1 0 1 0 1 1 0 0 1 1 1 x x x x x",
"x x x x x x x x 1 1 i i i i i i";
;
memory "calibration"
size = 4;
read = "0 0 1 1 1 0 0 0 0 0 x x x x x x",
"0 0 0 0 0 0 a1 a0 o o o o o o o o";
;
memory "signature"
size = 3;
read = "0 0 1 1 0 0 0 0 x x x x x x x x",
"x x x x x x a1 a0 o o o o o o o o";
;
;
#------------------------------------------------------------
# ATmega8535
#------------------------------------------------------------
part
id = "m8535";
desc = "ATmega8535";
stk500_devcode = 0x64;
avr910_devcode = 0x69;
signature = 0x1e 0x93 0x08;
pagel = 0xd7;
bs2 = 0xa0;
chip_erase_delay = 9000;
pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1",
"x x x x x x x x x x x x x x x x";
chip_erase = "1 0 1 0 1 1 0 0 1 0 0 x x x x x",
"x x x x x x x x x x x x x x x x";
timeout = 200;
stabdelay = 100;
cmdexedelay = 25;
synchloops = 32;
bytedelay = 0;
pollindex = 3;
pollvalue = 0x53;
predelay = 1;
postdelay = 1;
pollmethod = 0;
pp_controlstack =
0x0E, 0x1E, 0x0F, 0x1F, 0x2E, 0x3E, 0x2F, 0x3F,
0x4E, 0x5E, 0x4F, 0x5F, 0x6E, 0x7E, 0x6F, 0x7F,
0x66, 0x76, 0x67, 0x77, 0x6A, 0x7A, 0x6B, 0x7B,
0xBE, 0xFD, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00;
hventerstabdelay = 100;
progmodedelay = 0;
latchcycles = 6;
togglevtg = 0;
poweroffdelay = 0;
resetdelayms = 0;
resetdelayus = 0;
hvleavestabdelay = 15;
chiperasepulsewidth = 0;
chiperasepolltimeout = 10;
programfusepulsewidth = 0;
programfusepolltimeout = 5;
programlockpulsewidth = 0;
programlockpolltimeout = 5;
memory "eeprom"
size = 512;
min_write_delay = 9000;
max_write_delay = 9000;
readback_p1 = 0xff;
readback_p2 = 0xff;
read = " 1 0 1 0 0 0 0 0",
" 0 0 x x x x x a8",
" a7 a6 a5 a4 a3 a2 a1 a0",
" o o o o o o o o";
write = " 1 1 0 0 0 0 0 0",
" 0 0 x x x x x a8",
" a7 a6 a5 a4 a3 a2 a1 a0",
" i i i i i i i i";
mode = 0x04;
delay = 20;
blocksize = 128;
readsize = 256;
;
memory "flash"
paged = yes;
size = 8192;
page_size = 64;
num_pages = 128;
min_write_delay = 4500;
max_write_delay = 4500;
readback_p1 = 0xff;
readback_p2 = 0xff;
read_lo = " 0 0 1 0 0 0 0 0",
" 0 0 0 0 a11 a10 a9 a8",
" a7 a6 a5 a4 a3 a2 a1 a0",
" o o o o o o o o";
read_hi = " 0 0 1 0 1 0 0 0",
" 0 0 0 0 a11 a10 a9 a8",
" a7 a6 a5 a4 a3 a2 a1 a0",
" o o o o o o o o";
loadpage_lo = " 0 1 0 0 0 0 0 0",
" 0 0 0 0 x x x x",
" x x x a4 a3 a2 a1 a0",
" i i i i i i i i";
loadpage_hi = " 0 1 0 0 1 0 0 0",
" 0 0 0 0 x x x x",
" x x x a4 a3 a2 a1 a0",
" i i i i i i i i";
writepage = " 0 1 0 0 1 1 0 0",
" 0 0 0 0 a11 a10 a9 a8",
" a7 a6 a5 x x x x x",
" x x x x x x x x";
mode = 0x21;
delay = 6;
blocksize = 64;
readsize = 256;
;
memory "lfuse"
size = 1;
min_write_delay = 2000;
max_write_delay = 2000;
read = "0 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0",
"x x x x x x x x o o o o o o o o";
write = "1 0 1 0 1 1 0 0 1 0 1 0 0 0 0 0",
"x x x x x x x x i i i i i i i i";
;
memory "hfuse"
size = 1;
min_write_delay = 2000;
max_write_delay = 2000;
read = "0 1 0 1 1 0 0 0 0 0 0 0 1 0 0 0",
"x x x x x x x x o o o o o o o o";
write = "1 0 1 0 1 1 0 0 1 0 1 0 1 0 0 0",
"x x x x x x x x i i i i i i i i";
;
memory "lock"
size = 1;
min_write_delay = 2000;
max_write_delay = 2000;
read = "0 1 0 1 1 0 0 0 0 0 0 0 0 0 0 0",
"x x x x x x x x x x o o o o o o";
write = "1 0 1 0 1 1 0 0 1 1 1 x x x x x",
"x x x x x x x x 1 1 i i i i i i";
;
memory "calibration"
size = 4;
read = "0 0 1 1 1 0 0 0 0 0 x x x x x x",
"0 0 0 0 0 0 a1 a0 o o o o o o o o";
;
memory "signature"
size = 3;
read = "0 0 1 1 0 0 0 0 x x x x x x x x",
"x x x x x x a1 a0 o o o o o o o o";
;
;
#------------------------------------------------------------
# ATtiny26
#------------------------------------------------------------
part
id = "t26";
desc = "ATtiny26";
stk500_devcode = 0x21;
avr910_devcode = 0x5e;
signature = 0x1e 0x91 0x09;
pagel = 0xb3;
bs2 = 0xb2;
chip_erase_delay = 9000;
pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1",
"x x x x x x x x x x x x x x x x";
chip_erase = "1 0 1 0 1 1 0 0 1 0 0 x x x x x",
"x x x x x x x x x x x x x x x x";
timeout = 200;
stabdelay = 100;
cmdexedelay = 25;
synchloops = 32;
bytedelay = 0;
pollindex = 3;
pollvalue = 0x53;
predelay = 1;
postdelay = 1;
pollmethod = 0;
pp_controlstack =
0xC4, 0xE4, 0xC4, 0xE4, 0xCC, 0xEC, 0xCC, 0xEC,
0xD4, 0xF4, 0xD4, 0xF4, 0xDC, 0xFC, 0xDC, 0xFC,
0xC8, 0xE8, 0xD8, 0xF8, 0x4C, 0x6C, 0x5C, 0x7C,
0xEC, 0xBC, 0x00, 0x06, 0x00, 0x00, 0x00, 0x00;
hventerstabdelay = 100;
progmodedelay = 0;
latchcycles = 5;
togglevtg = 1;
poweroffdelay = 15;
resetdelayms = 2;
resetdelayus = 0;
hvleavestabdelay = 15;
chiperasepulsewidth = 0;
chiperasepolltimeout = 10;
programfusepulsewidth = 0;
programfusepolltimeout = 5;
programlockpulsewidth = 0;
programlockpolltimeout = 5;
memory "eeprom"
size = 128;
min_write_delay = 9000;
max_write_delay = 9000;
readback_p1 = 0xff;
readback_p2 = 0xff;
read = "1 0 1 0 0 0 0 0 x x x x x x x x",
"x a6 a5 a4 a3 a2 a1 a0 o o o o o o o o";
write = "1 1 0 0 0 0 0 0 x x x x x x x x",
"x a6 a5 a4 a3 a2 a1 a0 i i i i i i i i";
mode = 0x04;
delay = 10;
blocksize = 64;
readsize = 256;
;
memory "flash"
paged = yes;
size = 2048;
page_size = 32;
num_pages = 64;
min_write_delay = 4500;
max_write_delay = 4500;
readback_p1 = 0xff;
readback_p2 = 0xff;
read_lo = " 0 0 1 0 0 0 0 0",
" x x x x x x a9 a8",
" a7 a6 a5 a4 a3 a2 a1 a0",
" o o o o o o o o";
read_hi = " 0 0 1 0 1 0 0 0",
" x x x x x x a9 a8",
" a7 a6 a5 a4 a3 a2 a1 a0",
" o o o o o o o o";
loadpage_lo = " 0 1 0 0 0 0 0 0",
" x x x x x x x x",
" x x x x a3 a2 a1 a0",
" i i i i i i i i";
loadpage_hi = " 0 1 0 0 1 0 0 0",
" x x x x x x x x",
" x x x x a3 a2 a1 a0",
" i i i i i i i i";
writepage = " 0 1 0 0 1 1 0 0",
" x x x x x x a9 a8",
" a7 a6 a5 a4 x x x x",
" x x x x x x x x";
mode = 0x21;
delay = 6;
blocksize = 16;
readsize = 256;
;
memory "signature"
size = 3;
read = "0 0 1 1 0 0 0 0 x x x x x x x x",
"0 0 0 0 0 0 a1 a0 o o o o o o o o";
;
memory "lock"
size = 1;
read = "0 1 0 1 1 0 0 0 x x x x x x x x",
"x x x x x x x x x x x x x x o o";
write = "1 0 1 0 1 1 0 0 1 1 1 1 1 1 i i",
"x x x x x x x x x x x x x x x x";
min_write_delay = 9000;
max_write_delay = 9000;
;
memory "lfuse"
size = 1;
write = "1 0 1 0 1 1 0 0 1 0 1 0 0 0 0 0",
"x x x x x x x x i i i i i i i i";
read = "0 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0",
"x x x x x x x x o o o o o o o o";
min_write_delay = 9000;
max_write_delay = 9000;
;
memory "hfuse"
size = 1;
write = "1 0 1 0 1 1 0 0 1 0 1 0 1 0 0 0",
"x x x x x x x x x x x i i i i i";
read = "0 1 0 1 1 0 0 0 0 0 0 0 1 0 0 0",
"x x x x x x x x x x x o o o o o";
min_write_delay = 9000;
max_write_delay = 9000;
;
memory "calibration"
size = 4;
read = "0 0 1 1 1 0 0 0 x x x x x x x x",
"0 0 0 0 0 0 a1 a0 o o o o o o o o";
;
;
#------------------------------------------------------------
# ATtiny261
#------------------------------------------------------------
# Close to ATtiny26
part
id = "t261";
desc = "ATtiny261";
has_debugwire = yes;
flash_instr = 0xB4, 0x00, 0x10;
eeprom_instr = 0xBB, 0xFF, 0xBB, 0xEE, 0xBB, 0xCC, 0xB2, 0x0D,
0xBC, 0x00, 0xB4, 0x00, 0xBA, 0x0D, 0xBB, 0xBC,
0x99, 0xE1, 0xBB, 0xAC;
# stk500_devcode = 0x21;
# avr910_devcode = 0x5e;
signature = 0x1e 0x91 0x0c;
pagel = 0xb3;
bs2 = 0xb2;
chip_erase_delay = 4000;
pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1",
"x x x x x x x x x x x x x x x x";
chip_erase = "1 0 1 0 1 1 0 0 1 0 0 x x x x x",
"x x x x x x x x x x x x x x x x";
timeout = 200;
stabdelay = 100;
cmdexedelay = 25;
synchloops = 32;
bytedelay = 0;
pollindex = 3;
pollvalue = 0x53;
predelay = 1;
postdelay = 1;
pollmethod = 0;
pp_controlstack =
0xC4, 0xE4, 0xC4, 0xE4, 0xCC, 0xEC, 0xCC, 0xEC,
0xD4, 0xF4, 0xD4, 0xF4, 0xDC, 0xFC, 0xDC, 0xFC,
0xC8, 0xE8, 0xD8, 0xF8, 0x4C, 0x6C, 0x5C, 0x7C,
0xEC, 0xBC, 0x00, 0x06, 0x00, 0x00, 0x00, 0x00;
hventerstabdelay = 100;
progmodedelay = 0;
latchcycles = 5;
togglevtg = 1;
poweroffdelay = 15;
resetdelayms = 2;
resetdelayus = 0;
hvleavestabdelay = 15;
chiperasepulsewidth = 0;
chiperasepolltimeout = 10;
programfusepulsewidth = 0;
programfusepolltimeout = 5;
programlockpulsewidth = 0;
programlockpolltimeout = 5;
ocdrev = 1;
memory "eeprom"
paged = no;
size = 128;
page_size = 4;
num_pages = 32;
min_write_delay = 4000;
max_write_delay = 4000;
readback_p1 = 0xff;
readback_p2 = 0xff;
read = "1 0 1 0 0 0 0 0 x x x x x x x x",
"x a6 a5 a4 a3 a2 a1 a0 o o o o o o o o";
write = "1 1 0 0 0 0 0 0 x x x x x x x x",
"x a6 a5 a4 a3 a2 a1 a0 i i i i i i i i";
loadpage_lo = " 1 1 0 0 0 0 0 1",
" 0 0 0 0 0 0 0 0",
" 0 0 0 0 0 0 a1 a0",
" i i i i i i i i";
writepage = " 1 1 0 0 0 0 1 0",
" 0 0 x x x x x x",
" x a6 a5 a4 a3 a2 0 0",
" x x x x x x x x";
mode = 0x41;
delay = 10;
blocksize = 4;
readsize = 256;
;
memory "flash"
paged = yes;
size = 2048;
page_size = 32;
num_pages = 64;
min_write_delay = 4500;
max_write_delay = 4500;
readback_p1 = 0xff;
readback_p2 = 0xff;
read_lo = " 0 0 1 0 0 0 0 0",
" x x x x x x a9 a8",
" a7 a6 a5 a4 a3 a2 a1 a0",
" o o o o o o o o";
read_hi = " 0 0 1 0 1 0 0 0",
" x x x x x x a9 a8",
" a7 a6 a5 a4 a3 a2 a1 a0",
" o o o o o o o o";
loadpage_lo = " 0 1 0 0 0 0 0 0",
" x x x x x x x x",
" x x x x a3 a2 a1 a0",
" i i i i i i i i";
loadpage_hi = " 0 1 0 0 1 0 0 0",
" x x x x x x x x",
" x x x x a3 a2 a1 a0",
" i i i i i i i i";
writepage = " 0 1 0 0 1 1 0 0",
" x x x x x x a9 a8",
" a7 a6 a5 a4 x x x x",
" x x x x x x x x";
mode = 0x41;
delay = 6;
blocksize = 32;
readsize = 256;
;
memory "signature"
size = 3;
read = "0 0 1 1 0 0 0 0 x x x x x x x x",
"0 0 0 0 0 0 a1 a0 o o o o o o o o";
;
memory "lock"
size = 1;
read = "0 1 0 1 1 0 0 0 x x x x x x x x",
"x x x x x x x x x x x x x x o o";
write = "1 0 1 0 1 1 0 0 1 1 1 1 1 1 i i",
"x x x x x x x x x x x x x x x x";
min_write_delay = 4500;
max_write_delay = 4500;
;
memory "lfuse"
size = 1;
write = "1 0 1 0 1 1 0 0 1 0 1 0 0 0 0 0",
"x x x x x x x x i i i i i i i i";
read = "0 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0",
"x x x x x x x x o o o o o o o o";
min_write_delay = 4500;
max_write_delay = 4500;
;
memory "hfuse"
size = 1;
write = "1 0 1 0 1 1 0 0 1 0 1 0 1 0 0 0",
"x x x x x x x x i i i i i i i i";
read = "0 1 0 1 1 0 0 0 0 0 0 0 1 0 0 0",
"x x x x x x x x o o o o o o o o";
min_write_delay = 4500;
max_write_delay = 4500;
;
memory "efuse"
size = 1;
write = "1 0 1 0 1 1 0 0 1 0 1 0 0 1 0 0",
"x x x x x x x x x x x x x x x i";
read = "0 1 0 1 0 0 0 0 0 0 0 0 1 0 0 0",
"x x x x x x x x x x x x x x x o";
min_write_delay = 4500;
max_write_delay = 4500;
;
memory "calibration"
size = 1;
read = "0 0 1 1 1 0 0 0 x x x x x x x x",
"0 0 0 0 0 0 0 0 o o o o o o o o";
;
;
#------------------------------------------------------------
# ATtiny461
#------------------------------------------------------------
# Close to ATtiny261
part
id = "t461";
desc = "ATtiny461";
has_debugwire = yes;
flash_instr = 0xB4, 0x00, 0x10;
eeprom_instr = 0xBB, 0xFF, 0xBB, 0xEE, 0xBB, 0xCC, 0xB2, 0x0D,
0xBC, 0x00, 0xB4, 0x00, 0xBA, 0x0D, 0xBB, 0xBC,
0x99, 0xE1, 0xBB, 0xAC;
# stk500_devcode = 0x21;
# avr910_devcode = 0x5e;
signature = 0x1e 0x92 0x08;
pagel = 0xb3;
bs2 = 0xb2;
chip_erase_delay = 4000;
pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1",
"x x x x x x x x x x x x x x x x";
chip_erase = "1 0 1 0 1 1 0 0 1 0 0 x x x x x",
"x x x x x x x x x x x x x x x x";
timeout = 200;
stabdelay = 100;
cmdexedelay = 25;
synchloops = 32;
bytedelay = 0;
pollindex = 3;
pollvalue = 0x53;
predelay = 1;
postdelay = 1;
pollmethod = 0;
pp_controlstack =
0xC4, 0xE4, 0xC4, 0xE4, 0xCC, 0xEC, 0xCC, 0xEC,
0xD4, 0xF4, 0xD4, 0xF4, 0xDC, 0xFC, 0xDC, 0xFC,
0xC8, 0xE8, 0xD8, 0xF8, 0x4C, 0x6C, 0x5C, 0x7C,
0xEC, 0xBC, 0x00, 0x06, 0x00, 0x00, 0x00, 0x00;
hventerstabdelay = 100;
progmodedelay = 0;
latchcycles = 5;
togglevtg = 1;
poweroffdelay = 15;
resetdelayms = 2;
resetdelayus = 0;
hvleavestabdelay = 15;
chiperasepulsewidth = 0;
chiperasepolltimeout = 10;
programfusepulsewidth = 0;
programfusepolltimeout = 5;
programlockpulsewidth = 0;
programlockpolltimeout = 5;
ocdrev = 1;
memory "eeprom"
paged = no;
size = 256;
page_size = 4;
num_pages = 64;
min_write_delay = 4000;
max_write_delay = 4000;
readback_p1 = 0xff;
readback_p2 = 0xff;
read = " 1 0 1 0 0 0 0 0 x x x x x x x x",
"a7 a6 a5 a4 a3 a2 a1 a0 o o o o o o o o";
write = " 1 1 0 0 0 0 0 0 x x x x x x x x",
"a7 a6 a5 a4 a3 a2 a1 a0 i i i i i i i i";
loadpage_lo = " 1 1 0 0 0 0 0 1",
" 0 0 0 0 0 0 0 0",
" 0 0 0 0 0 0 a1 a0",
" i i i i i i i i";
writepage = " 1 1 0 0 0 0 1 0",
" 0 0 x x x x x x",
" a7 a6 a5 a4 a3 a2 0 0",
" x x x x x x x x";
mode = 0x41;
delay = 10;
blocksize = 4;
readsize = 256;
;
memory "flash"
paged = yes;
size = 4096;
page_size = 64;
num_pages = 64;
min_write_delay = 4500;
max_write_delay = 4500;
readback_p1 = 0xff;
readback_p2 = 0xff;
read_lo = " 0 0 1 0 0 0 0 0",
" x x x x x a10 a9 a8",
" a7 a6 a5 a4 a3 a2 a1 a0",
" o o o o o o o o";
read_hi = " 0 0 1 0 1 0 0 0",
" x x x x x a10 a9 a8",
" a7 a6 a5 a4 a3 a2 a1 a0",
" o o o o o o o o";
loadpage_lo = " 0 1 0 0 0 0 0 0",
" x x x x x x x x",
" x x x a4 a3 a2 a1 a0",
" i i i i i i i i";
loadpage_hi = " 0 1 0 0 1 0 0 0",
" x x x x x x x x",
" x x x a4 a3 a2 a1 a0",
" i i i i i i i i";
writepage = " 0 1 0 0 1 1 0 0",
" x x x x x a10 a9 a8",
" a7 a6 a5 x x x x x",
" x x x x x x x x";
mode = 0x41;
delay = 6;
blocksize = 64;
readsize = 256;
;
memory "signature"
size = 3;
read = "0 0 1 1 0 0 0 0 x x x x x x x x",
"0 0 0 0 0 0 a1 a0 o o o o o o o o";
;
memory "lock"
size = 1;
read = "0 1 0 1 1 0 0 0 x x x x x x x x",
"x x x x x x x x x x x x x x o o";
write = "1 0 1 0 1 1 0 0 1 1 1 1 1 1 i i",
"x x x x x x x x x x x x x x x x";
min_write_delay = 4500;
max_write_delay = 4500;
;
memory "lfuse"
size = 1;
write = "1 0 1 0 1 1 0 0 1 0 1 0 0 0 0 0",
"x x x x x x x x i i i i i i i i";
read = "0 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0",
"x x x x x x x x o o o o o o o o";
min_write_delay = 4500;
max_write_delay = 4500;
;
memory "hfuse"
size = 1;
write = "1 0 1 0 1 1 0 0 1 0 1 0 1 0 0 0",
"x x x x x x x x i i i i i i i i";
read = "0 1 0 1 1 0 0 0 0 0 0 0 1 0 0 0",
"x x x x x x x x o o o o o o o o";
min_write_delay = 4500;
max_write_delay = 4500;
;
memory "efuse"
size = 1;
write = "1 0 1 0 1 1 0 0 1 0 1 0 0 1 0 0",
"x x x x x x x x x x x x x x x i";
read = "0 1 0 1 0 0 0 0 0 0 0 0 1 0 0 0",
"x x x x x x x x x x x x x x x o";
min_write_delay = 4500;
max_write_delay = 4500;
;
memory "calibration"
size = 1;
read = "0 0 1 1 1 0 0 0 x x x x x x x x",
"0 0 0 0 0 0 0 0 o o o o o o o o";
;
;
#------------------------------------------------------------
# ATtiny861
#------------------------------------------------------------
# Close to ATtiny461
part
id = "t861";
desc = "ATtiny861";
has_debugwire = yes;
flash_instr = 0xB4, 0x00, 0x10;
eeprom_instr = 0xBB, 0xFF, 0xBB, 0xEE, 0xBB, 0xCC, 0xB2, 0x0D,
0xBC, 0x00, 0xB4, 0x00, 0xBA, 0x0D, 0xBB, 0xBC,
0x99, 0xE1, 0xBB, 0xAC;
# stk500_devcode = 0x21;
# avr910_devcode = 0x5e;
signature = 0x1e 0x93 0x0d;
pagel = 0xb3;
bs2 = 0xb2;
chip_erase_delay = 4000;
pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1",
"x x x x x x x x x x x x x x x x";
chip_erase = "1 0 1 0 1 1 0 0 1 0 0 x x x x x",
"x x x x x x x x x x x x x x x x";
timeout = 200;
stabdelay = 100;
cmdexedelay = 25;
synchloops = 32;
bytedelay = 0;
pollindex = 3;
pollvalue = 0x53;
predelay = 1;
postdelay = 1;
pollmethod = 0;
pp_controlstack =
0xC4, 0xE4, 0xC4, 0xE4, 0xCC, 0xEC, 0xCC, 0xEC,
0xD4, 0xF4, 0xD4, 0xF4, 0xDC, 0xFC, 0xDC, 0xFC,
0xC8, 0xE8, 0xD8, 0xF8, 0x4C, 0x6C, 0x5C, 0x7C,
0xEC, 0xBC, 0x00, 0x06, 0x00, 0x00, 0x00, 0x00;
hventerstabdelay = 100;
progmodedelay = 0;
latchcycles = 5;
togglevtg = 1;
poweroffdelay = 15;
resetdelayms = 2;
resetdelayus = 0;
hvleavestabdelay = 15;
chiperasepulsewidth = 0;
chiperasepolltimeout = 10;
programfusepulsewidth = 0;
programfusepolltimeout = 5;
programlockpulsewidth = 0;
programlockpolltimeout = 5;
ocdrev = 1;
memory "eeprom"
paged = no;
size = 512;
num_pages = 128;
page_size = 4;
min_write_delay = 4000;
max_write_delay = 4000;
readback_p1 = 0xff;
readback_p2 = 0xff;
read = " 1 0 1 0 0 0 0 0 x x x x x x x a8",
"a7 a6 a5 a4 a3 a2 a1 a0 o o o o o o o o";
write = " 1 1 0 0 0 0 0 0 x x x x x x x a8",
"a7 a6 a5 a4 a3 a2 a1 a0 i i i i i i i i";
loadpage_lo = " 1 1 0 0 0 0 0 1",
" 0 0 0 0 0 0 0 0",
" 0 0 0 0 0 0 a1 a0",
" i i i i i i i i";
writepage = " 1 1 0 0 0 0 1 0",
" 0 0 x x x x x a8",
" a7 a6 a5 a4 a3 a2 0 0",
" x x x x x x x x";
mode = 0x41;
delay = 10;
blocksize = 4;
readsize = 256;
;
memory "flash"
paged = yes;
size = 8192;
page_size = 64;
num_pages = 128;
min_write_delay = 4500;
max_write_delay = 4500;
readback_p1 = 0xff;
readback_p2 = 0xff;
read_lo = " 0 0 1 0 0 0 0 0",
" x x x x a11 a10 a9 a8",
" a7 a6 a5 a4 a3 a2 a1 a0",
" o o o o o o o o";
read_hi = " 0 0 1 0 1 0 0 0",
" x x x x a11 a10 a9 a8",
" a7 a6 a5 a4 a3 a2 a1 a0",
" o o o o o o o o";
loadpage_lo = " 0 1 0 0 0 0 0 0",
" x x x x x x x x",
" x x x a4 a3 a2 a1 a0",
" i i i i i i i i";
loadpage_hi = " 0 1 0 0 1 0 0 0",
" x x x x x x x x",
" x x x a4 a3 a2 a1 a0",
" i i i i i i i i";
writepage = " 0 1 0 0 1 1 0 0",
" x x x x a11 a10 a9 a8",
" a7 a6 a5 x x x x x",
" x x x x x x x x";
mode = 0x41;
delay = 6;
blocksize = 64;
readsize = 256;
;
memory "signature"
size = 3;
read = "0 0 1 1 0 0 0 0 x x x x x x x x",
"0 0 0 0 0 0 a1 a0 o o o o o o o o";
;
memory "lock"
size = 1;
read = "0 1 0 1 1 0 0 0 x x x x x x x x",
"x x x x x x x x x x x x x x o o";
write = "1 0 1 0 1 1 0 0 1 1 1 1 1 1 i i",
"x x x x x x x x x x x x x x x x";
min_write_delay = 4500;
max_write_delay = 4500;
;
memory "lfuse"
size = 1;
write = "1 0 1 0 1 1 0 0 1 0 1 0 0 0 0 0",
"x x x x x x x x i i i i i i i i";
read = "0 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0",
"x x x x x x x x o o o o o o o o";
min_write_delay = 4500;
max_write_delay = 4500;
;
memory "hfuse"
size = 1;
write = "1 0 1 0 1 1 0 0 1 0 1 0 1 0 0 0",
"x x x x x x x x i i i i i i i i";
read = "0 1 0 1 1 0 0 0 0 0 0 0 1 0 0 0",
"x x x x x x x x o o o o o o o o";
min_write_delay = 4500;
max_write_delay = 4500;
;
memory "efuse"
size = 1;
write = "1 0 1 0 1 1 0 0 1 0 1 0 0 1 0 0",
"x x x x x x x x x x x x x x x i";
read = "0 1 0 1 0 0 0 0 0 0 0 0 1 0 0 0",
"x x x x x x x x x x x x x x x o";
min_write_delay = 4500;
max_write_delay = 4500;
;
memory "calibration"
size = 1;
read = "0 0 1 1 1 0 0 0 x x x x x x x x",
"0 0 0 0 0 0 0 0 o o o o o o o o";
;
;
#------------------------------------------------------------
# ATmega48
#------------------------------------------------------------
part
id = "m48";
desc = "ATmega48";
has_debugwire = yes;
flash_instr = 0xB6, 0x01, 0x11;
eeprom_instr = 0xBD, 0xF2, 0xBD, 0xE1, 0xBB, 0xCF, 0xB4, 0x00,
0xBE, 0x01, 0xB6, 0x01, 0xBC, 0x00, 0xBB, 0xBF,
0x99, 0xF9, 0xBB, 0xAF;
stk500_devcode = 0x59;
# avr910_devcode = 0x;
signature = 0x1e 0x92 0x05;
pagel = 0xd7;
bs2 = 0xc2;
chip_erase_delay = 45000;
pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1",
"x x x x x x x x x x x x x x x x";
chip_erase = "1 0 1 0 1 1 0 0 1 0 0 x x x x x",
"x x x x x x x x x x x x x x x x";
timeout = 200;
stabdelay = 100;
cmdexedelay = 25;
synchloops = 32;
bytedelay = 0;
pollindex = 3;
pollvalue = 0x53;
predelay = 1;
postdelay = 1;
pollmethod = 1;
pp_controlstack =
0x0E, 0x1E, 0x0F, 0x1F, 0x2E, 0x3E, 0x2F, 0x3F,
0x4E, 0x5E, 0x4F, 0x5F, 0x6E, 0x7E, 0x6F, 0x7F,
0x66, 0x76, 0x67, 0x77, 0x6A, 0x7A, 0x6B, 0x7B,
0xBE, 0xFD, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00;
hventerstabdelay = 100;
progmodedelay = 0;
latchcycles = 5;
togglevtg = 1;
poweroffdelay = 15;
resetdelayms = 1;
resetdelayus = 0;
hvleavestabdelay = 15;
resetdelay = 15;
chiperasepulsewidth = 0;
chiperasepolltimeout = 10;
programfusepulsewidth = 0;
programfusepolltimeout = 5;
programlockpulsewidth = 0;
programlockpolltimeout = 5;
ocdrev = 1;
memory "eeprom"
paged = no;
page_size = 4;
size = 256;
min_write_delay = 3600;
max_write_delay = 3600;
readback_p1 = 0xff;
readback_p2 = 0xff;
read = " 1 0 1 0 0 0 0 0",
" 0 0 0 x x x x x",
" a7 a6 a5 a4 a3 a2 a1 a0",
" o o o o o o o o";
write = " 1 1 0 0 0 0 0 0",
" 0 0 0 x x x x x",
" a7 a6 a5 a4 a3 a2 a1 a0",
" i i i i i i i i";
loadpage_lo = " 1 1 0 0 0 0 0 1",
" 0 0 0 0 0 0 0 0",
" 0 0 0 0 0 0 a1 a0",
" i i i i i i i i";
writepage = " 1 1 0 0 0 0 1 0",
" 0 0 x x x x x x",
" a7 a6 a5 a4 a3 a2 0 0",
" x x x x x x x x";
mode = 0x41;
delay = 20;
blocksize = 4;
readsize = 256;
;
memory "flash"
paged = yes;
size = 4096;
page_size = 64;
num_pages = 64;
min_write_delay = 4500;
max_write_delay = 4500;
readback_p1 = 0x00;
readback_p2 = 0x00;
read_lo = " 0 0 1 0 0 0 0 0",
" 0 0 0 0 0 a10 a9 a8",
" a7 a6 a5 a4 a3 a2 a1 a0",
" o o o o o o o o";
read_hi = " 0 0 1 0 1 0 0 0",
" 0 0 0 0 0 a10 a9 a8",
" a7 a6 a5 a4 a3 a2 a1 a0",
" o o o o o o o o";
loadpage_lo = " 0 1 0 0 0 0 0 0",
" 0 0 0 x x x x x",
" x x x a4 a3 a2 a1 a0",
" i i i i i i i i";
loadpage_hi = " 0 1 0 0 1 0 0 0",
" 0 0 0 x x x x x",
" x x x a4 a3 a2 a1 a0",
" i i i i i i i i";
writepage = " 0 1 0 0 1 1 0 0",
" 0 0 0 0 0 a10 a9 a8",
" a7 a6 a5 x x x x x",
" x x x x x x x x";
mode = 0x41;
delay = 6;
blocksize = 64;
readsize = 256;
;
memory "lfuse"
size = 1;
min_write_delay = 4500;
max_write_delay = 4500;
read = "0 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0",
"x x x x x x x x o o o o o o o o";
write = "1 0 1 0 1 1 0 0 1 0 1 0 0 0 0 0",
"x x x x x x x x i i i i i i i i";
;
memory "hfuse"
size = 1;
min_write_delay = 4500;
max_write_delay = 4500;
read = "0 1 0 1 1 0 0 0 0 0 0 0 1 0 0 0",
"x x x x x x x x o o o o o o o o";
write = "1 0 1 0 1 1 0 0 1 0 1 0 1 0 0 0",
"x x x x x x x x i i i i i i i i";
;
memory "efuse"
size = 1;
min_write_delay = 4500;
max_write_delay = 4500;
read = "0 1 0 1 0 0 0 0 0 0 0 0 1 0 0 0",
"x x x x x x x x x x x x x x x o";
write = "1 0 1 0 1 1 0 0 1 0 1 0 0 1 0 0",
"x x x x x x x x x x x x x x x i";
;
memory "lock"
size = 1;
min_write_delay = 4500;
max_write_delay = 4500;
read = "0 1 0 1 1 0 0 0 0 0 0 0 0 0 0 0",
"x x x x x x x x x x o o o o o o";
write = "1 0 1 0 1 1 0 0 1 1 1 x x x x x",
"x x x x x x x x 1 1 i i i i i i";
;
memory "calibration"
size = 1;
read = "0 0 1 1 1 0 0 0 0 0 0 x x x x x",
"0 0 0 0 0 0 0 0 o o o o o o o o";
;
memory "signature"
size = 3;
read = "0 0 1 1 0 0 0 0 0 0 0 x x x x x",
"x x x x x x a1 a0 o o o o o o o o";
;
;
#------------------------------------------------------------
# ATmega48P
#------------------------------------------------------------
part parent "m48"
id = "m48p";
desc = "ATmega48P";
signature = 0x1e 0x92 0x0a;
ocdrev = 1;
;
#------------------------------------------------------------
# ATmega88
#------------------------------------------------------------
part
id = "m88";
desc = "ATmega88";
has_debugwire = yes;
flash_instr = 0xB6, 0x01, 0x11;
eeprom_instr = 0xBD, 0xF2, 0xBD, 0xE1, 0xBB, 0xCF, 0xB4, 0x00,
0xBE, 0x01, 0xB6, 0x01, 0xBC, 0x00, 0xBB, 0xBF,
0x99, 0xF9, 0xBB, 0xAF;
stk500_devcode = 0x73;
# avr910_devcode = 0x;
signature = 0x1e 0x93 0x0a;
pagel = 0xd7;
bs2 = 0xc2;
chip_erase_delay = 9000;
pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1",
"x x x x x x x x x x x x x x x x";
chip_erase = "1 0 1 0 1 1 0 0 1 0 0 x x x x x",
"x x x x x x x x x x x x x x x x";
timeout = 200;
stabdelay = 100;
cmdexedelay = 25;
synchloops = 32;
bytedelay = 0;
pollindex = 3;
pollvalue = 0x53;
predelay = 1;
postdelay = 1;
pollmethod = 1;
pp_controlstack =
0x0E, 0x1E, 0x0F, 0x1F, 0x2E, 0x3E, 0x2F, 0x3F,
0x4E, 0x5E, 0x4F, 0x5F, 0x6E, 0x7E, 0x6F, 0x7F,
0x66, 0x76, 0x67, 0x77, 0x6A, 0x7A, 0x6B, 0x7B,
0xBE, 0xFD, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00;
hventerstabdelay = 100;
progmodedelay = 0;
latchcycles = 5;
togglevtg = 1;
poweroffdelay = 15;
resetdelayms = 1;
resetdelayus = 0;
hvleavestabdelay = 15;
resetdelay = 15;
chiperasepulsewidth = 0;
chiperasepolltimeout = 10;
programfusepulsewidth = 0;
programfusepolltimeout = 5;
programlockpulsewidth = 0;
programlockpolltimeout = 5;
ocdrev = 1;
memory "eeprom"
paged = no;
page_size = 4;
size = 512;
min_write_delay = 3600;
max_write_delay = 3600;
readback_p1 = 0xff;
readback_p2 = 0xff;
read = " 1 0 1 0 0 0 0 0",
" 0 0 0 x x x x a8",
" a7 a6 a5 a4 a3 a2 a1 a0",
" o o o o o o o o";
write = " 1 1 0 0 0 0 0 0",
" 0 0 0 x x x x a8",
" a7 a6 a5 a4 a3 a2 a1 a0",
" i i i i i i i i";
loadpage_lo = " 1 1 0 0 0 0 0 1",
" 0 0 0 0 0 0 0 0",
" 0 0 0 0 0 0 a1 a0",
" i i i i i i i i";
writepage = " 1 1 0 0 0 0 1 0",
" 0 0 x x x x x a8",
" a7 a6 a5 a4 a3 a2 0 0",
" x x x x x x x x";
mode = 0x41;
delay = 20;
blocksize = 4;
readsize = 256;
;
memory "flash"
paged = yes;
size = 8192;
page_size = 64;
num_pages = 128;
min_write_delay = 4500;
max_write_delay = 4500;
readback_p1 = 0xff;
readback_p2 = 0xff;
read_lo = " 0 0 1 0 0 0 0 0",
" 0 0 0 0 a11 a10 a9 a8",
" a7 a6 a5 a4 a3 a2 a1 a0",
" o o o o o o o o";
read_hi = " 0 0 1 0 1 0 0 0",
" 0 0 0 0 a11 a10 a9 a8",
" a7 a6 a5 a4 a3 a2 a1 a0",
" o o o o o o o o";
loadpage_lo = " 0 1 0 0 0 0 0 0",
" 0 0 0 x x x x x",
" x x x a4 a3 a2 a1 a0",
" i i i i i i i i";
loadpage_hi = " 0 1 0 0 1 0 0 0",
" 0 0 0 x x x x x",
" x x x a4 a3 a2 a1 a0",
" i i i i i i i i";
writepage = " 0 1 0 0 1 1 0 0",
" 0 0 0 0 a11 a10 a9 a8",
" a7 a6 a5 x x x x x",
" x x x x x x x x";
mode = 0x41;
delay = 6;
blocksize = 64;
readsize = 256;
;
memory "lfuse"
size = 1;
min_write_delay = 4500;
max_write_delay = 4500;
read = "0 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0",
"x x x x x x x x o o o o o o o o";
write = "1 0 1 0 1 1 0 0 1 0 1 0 0 0 0 0",
"x x x x x x x x i i i i i i i i";
;
memory "hfuse"
size = 1;
min_write_delay = 4500;
max_write_delay = 4500;
read = "0 1 0 1 1 0 0 0 0 0 0 0 1 0 0 0",
"x x x x x x x x o o o o o o o o";
write = "1 0 1 0 1 1 0 0 1 0 1 0 1 0 0 0",
"x x x x x x x x i i i i i i i i";
;
memory "efuse"
size = 1;
min_write_delay = 4500;
max_write_delay = 4500;
read = "0 1 0 1 0 0 0 0 0 0 0 0 1 0 0 0",
"x x x x x x x x x x x x x o o o";
write = "1 0 1 0 1 1 0 0 1 0 1 0 0 1 0 0",
"x x x x x x x x x x x x x i i i";
;
memory "lock"
size = 1;
min_write_delay = 4500;
max_write_delay = 4500;
read = "0 1 0 1 1 0 0 0 0 0 0 0 0 0 0 0",
"x x x x x x x x x x o o o o o o";
write = "1 0 1 0 1 1 0 0 1 1 1 x x x x x",
"x x x x x x x x 1 1 i i i i i i";
;
memory "calibration"
size = 1;
read = "0 0 1 1 1 0 0 0 0 0 0 x x x x x",
"0 0 0 0 0 0 0 0 o o o o o o o o";
;
memory "signature"
size = 3;
read = "0 0 1 1 0 0 0 0 0 0 0 x x x x x",
"x x x x x x a1 a0 o o o o o o o o";
;
;
#------------------------------------------------------------
# ATmega88P
#------------------------------------------------------------
part parent "m88"
id = "m88p";
desc = "ATmega88P";
signature = 0x1e 0x93 0x0f;
ocdrev = 1;
;
#------------------------------------------------------------
# ATmega168
#------------------------------------------------------------
part
id = "m168";
desc = "ATmega168";
has_debugwire = yes;
flash_instr = 0xB6, 0x01, 0x11;
eeprom_instr = 0xBD, 0xF2, 0xBD, 0xE1, 0xBB, 0xCF, 0xB4, 0x00,
0xBE, 0x01, 0xB6, 0x01, 0xBC, 0x00, 0xBB, 0xBF,
0x99, 0xF9, 0xBB, 0xAF;
stk500_devcode = 0x86;
# avr910_devcode = 0x;
signature = 0x1e 0x94 0x06;
pagel = 0xd7;
bs2 = 0xc2;
chip_erase_delay = 9000;
pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1",
"x x x x x x x x x x x x x x x x";
chip_erase = "1 0 1 0 1 1 0 0 1 0 0 x x x x x",
"x x x x x x x x x x x x x x x x";
timeout = 200;
stabdelay = 100;
cmdexedelay = 25;
synchloops = 32;
bytedelay = 0;
pollindex = 3;
pollvalue = 0x53;
predelay = 1;
postdelay = 1;
pollmethod = 1;
pp_controlstack =
0x0E, 0x1E, 0x0F, 0x1F, 0x2E, 0x3E, 0x2F, 0x3F,
0x4E, 0x5E, 0x4F, 0x5F, 0x6E, 0x7E, 0x6F, 0x7F,
0x66, 0x76, 0x67, 0x77, 0x6A, 0x7A, 0x6B, 0x7B,
0xBE, 0xFD, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00;
hventerstabdelay = 100;
progmodedelay = 0;
latchcycles = 5;
togglevtg = 1;
poweroffdelay = 15;
resetdelayms = 1;
resetdelayus = 0;
hvleavestabdelay = 15;
resetdelay = 15;
chiperasepulsewidth = 0;
chiperasepolltimeout = 10;
programfusepulsewidth = 0;
programfusepolltimeout = 5;
programlockpulsewidth = 0;
programlockpolltimeout = 5;
ocdrev = 1;
memory "eeprom"
paged = no;
page_size = 4;
size = 512;
min_write_delay = 3600;
max_write_delay = 3600;
readback_p1 = 0xff;
readback_p2 = 0xff;
read = " 1 0 1 0 0 0 0 0",
" 0 0 0 x x x x a8",
" a7 a6 a5 a4 a3 a2 a1 a0",
" o o o o o o o o";
write = " 1 1 0 0 0 0 0 0",
" 0 0 0 x x x x a8",
" a7 a6 a5 a4 a3 a2 a1 a0",
" i i i i i i i i";
loadpage_lo = " 1 1 0 0 0 0 0 1",
" 0 0 0 0 0 0 0 0",
" 0 0 0 0 0 0 a1 a0",
" i i i i i i i i";
writepage = " 1 1 0 0 0 0 1 0",
" 0 0 x x x x x a8",
" a7 a6 a5 a4 a3 a2 0 0",
" x x x x x x x x";
mode = 0x41;
delay = 20;
blocksize = 4;
readsize = 256;
;
memory "flash"
paged = yes;
size = 16384;
page_size = 128;
num_pages = 128;
min_write_delay = 4500;
max_write_delay = 4500;
readback_p1 = 0xff;
readback_p2 = 0xff;
read_lo = " 0 0 1 0 0 0 0 0",
" 0 0 0 a12 a11 a10 a9 a8",
" a7 a6 a5 a4 a3 a2 a1 a0",
" o o o o o o o o";
read_hi = " 0 0 1 0 1 0 0 0",
" 0 0 0 a12 a11 a10 a9 a8",
" a7 a6 a5 a4 a3 a2 a1 a0",
" o o o o o o o o";
loadpage_lo = " 0 1 0 0 0 0 0 0",
" 0 0 0 x x x x x",
" x x a5 a4 a3 a2 a1 a0",
" i i i i i i i i";
loadpage_hi = " 0 1 0 0 1 0 0 0",
" 0 0 0 x x x x x",
" x x a5 a4 a3 a2 a1 a0",
" i i i i i i i i";
writepage = " 0 1 0 0 1 1 0 0",
" 0 0 0 a12 a11 a10 a9 a8",
" a7 a6 x x x x x x",
" x x x x x x x x";
mode = 0x41;
delay = 6;
blocksize = 128;
readsize = 256;
;
memory "lfuse"
size = 1;
min_write_delay = 4500;
max_write_delay = 4500;
read = "0 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0",
"x x x x x x x x o o o o o o o o";
write = "1 0 1 0 1 1 0 0 1 0 1 0 0 0 0 0",
"x x x x x x x x i i i i i i i i";
;
memory "hfuse"
size = 1;
min_write_delay = 4500;
max_write_delay = 4500;
read = "0 1 0 1 1 0 0 0 0 0 0 0 1 0 0 0",
"x x x x x x x x o o o o o o o o";
write = "1 0 1 0 1 1 0 0 1 0 1 0 1 0 0 0",
"x x x x x x x x i i i i i i i i";
;
memory "efuse"
size = 1;
min_write_delay = 4500;
max_write_delay = 4500;
read = "0 1 0 1 0 0 0 0 0 0 0 0 1 0 0 0",
"x x x x x x x x x x x x x o o o";
write = "1 0 1 0 1 1 0 0 1 0 1 0 0 1 0 0",
"x x x x x x x x x x x x x i i i";
;
memory "lock"
size = 1;
min_write_delay = 4500;
max_write_delay = 4500;
read = "0 1 0 1 1 0 0 0 0 0 0 0 0 0 0 0",
"x x x x x x x x x x o o o o o o";
write = "1 0 1 0 1 1 0 0 1 1 1 x x x x x",
"x x x x x x x x 1 1 i i i i i i";
;
memory "calibration"
size = 1;
read = "0 0 1 1 1 0 0 0 0 0 0 x x x x x",
"0 0 0 0 0 0 0 0 o o o o o o o o";
;
memory "signature"
size = 3;
read = "0 0 1 1 0 0 0 0 0 0 0 x x x x x",
"x x x x x x a1 a0 o o o o o o o o";
;
;
#------------------------------------------------------------
# ATmega168P
#------------------------------------------------------------
part parent "m168"
id = "m168p";
desc = "ATmega168P";
signature = 0x1e 0x94 0x0b;
ocdrev = 1;
;
#------------------------------------------------------------
# ATtiny88
#------------------------------------------------------------
part
id = "t88";
desc = "ATtiny88";
has_debugwire = yes;
flash_instr = 0xB6, 0x01, 0x11;
eeprom_instr = 0xBD, 0xF2, 0xBD, 0xE1, 0xBB, 0xCF, 0xB4, 0x00,
0xBE, 0x01, 0xB6, 0x01, 0xBC, 0x00, 0xBB, 0xBF,
0x99, 0xF9, 0xBB, 0xAF;
stk500_devcode = 0x73;
# avr910_devcode = 0x;
signature = 0x1e 0x93 0x11;
pagel = 0xd7;
bs2 = 0xc2;
chip_erase_delay = 9000;
pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1",
"x x x x x x x x x x x x x x x x";
chip_erase = "1 0 1 0 1 1 0 0 1 0 0 x x x x x",
"x x x x x x x x x x x x x x x x";
timeout = 200;
stabdelay = 100;
cmdexedelay = 25;
synchloops = 32;
bytedelay = 0;
pollindex = 3;
pollvalue = 0x53;
predelay = 1;
postdelay = 1;
pollmethod = 1;
pp_controlstack =
0x0E, 0x1E, 0x0F, 0x1F, 0x2E, 0x3E, 0x2F, 0x3F,
0x4E, 0x5E, 0x4F, 0x5F, 0x6E, 0x7E, 0x6F, 0x7F,
0x66, 0x76, 0x67, 0x77, 0x6A, 0x7A, 0x6B, 0x7B,
0xBE, 0xFD, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00;
hventerstabdelay = 100;
progmodedelay = 0;
latchcycles = 5;
togglevtg = 1;
poweroffdelay = 15;
resetdelayms = 1;
resetdelayus = 0;
hvleavestabdelay = 15;
resetdelay = 15;
chiperasepulsewidth = 0;
chiperasepolltimeout = 10;
programfusepulsewidth = 0;
programfusepolltimeout = 5;
programlockpulsewidth = 0;
programlockpolltimeout = 5;
ocdrev = 1;
memory "eeprom"
paged = no;
page_size = 4;
size = 64;
min_write_delay = 3600;
max_write_delay = 3600;
readback_p1 = 0xff;
readback_p2 = 0xff;
read = " 1 0 1 0 0 0 0 0",
" 0 0 0 x x x x x",
" x a6 a5 a4 a3 a2 a1 a0",
" o o o o o o o o";
write = " 1 1 0 0 0 0 0 0",
" 0 0 0 x x x x x",
" x a6 a5 a4 a3 a2 a1 a0",
" i i i i i i i i";
loadpage_lo = " 1 1 0 0 0 0 0 1",
" 0 0 0 0 0 0 0 0",
" 0 0 0 0 0 0 a1 a0",
" i i i i i i i i";
writepage = " 1 1 0 0 0 0 1 0",
" 0 0 x x x x x x",
" x a6 a5 a4 a3 a2 0 0",
" x x x x x x x x";
mode = 0x41;
delay = 20;
blocksize = 4;
readsize = 64;
;
memory "flash"
paged = yes;
size = 8192;
page_size = 64;
num_pages = 128;
min_write_delay = 4500;
max_write_delay = 4500;
readback_p1 = 0xff;
readback_p2 = 0xff;
read_lo = " 0 0 1 0 0 0 0 0",
" 0 0 0 0 a11 a10 a9 a8",
" a7 a6 a5 a4 a3 a2 a1 a0",
" o o o o o o o o";
read_hi = " 0 0 1 0 1 0 0 0",
" 0 0 0 0 a11 a10 a9 a8",
" a7 a6 a5 a4 a3 a2 a1 a0",
" o o o o o o o o";
loadpage_lo = " 0 1 0 0 0 0 0 0",
" 0 0 0 x x x x x",
" x x x a4 a3 a2 a1 a0",
" i i i i i i i i";
loadpage_hi = " 0 1 0 0 1 0 0 0",
" 0 0 0 x x x x x",
" x x x a4 a3 a2 a1 a0",
" i i i i i i i i";
writepage = " 0 1 0 0 1 1 0 0",
" 0 0 0 0 a11 a10 a9 a8",
" a7 a6 a5 x x x x x",
" x x x x x x x x";
mode = 0x41;
delay = 6;
blocksize = 64;
readsize = 256;
;
memory "lfuse"
size = 1;
min_write_delay = 4500;
max_write_delay = 4500;
read = "0 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0",
"x x x x x x x x o o o o o o o o";
write = "1 0 1 0 1 1 0 0 1 0 1 0 0 0 0 0",
"x x x x x x x x i i i i i i i i";
;
memory "hfuse"
size = 1;
min_write_delay = 4500;
max_write_delay = 4500;
read = "0 1 0 1 1 0 0 0 0 0 0 0 1 0 0 0",
"x x x x x x x x o o o o o o o o";
write = "1 0 1 0 1 1 0 0 1 0 1 0 1 0 0 0",
"x x x x x x x x i i i i i i i i";
;
memory "efuse"
size = 1;
min_write_delay = 4500;
max_write_delay = 4500;
read = "0 1 0 1 0 0 0 0 0 0 0 0 1 0 0 0",
"x x x x x x x x x x x x x o o o";
write = "1 0 1 0 1 1 0 0 1 0 1 0 0 1 0 0",
"x x x x x x x x x x x x x x x i";
;
memory "lock"
size = 1;
min_write_delay = 4500;
max_write_delay = 4500;
read = "0 1 0 1 1 0 0 0 0 0 0 0 0 0 0 0",
"x x x x x x x x x x o o o o o o";
write = "1 0 1 0 1 1 0 0 1 1 1 x x x x x",
"x x x x x x x x 1 1 i i i i i i";
;
memory "calibration"
size = 1;
read = "0 0 1 1 1 0 0 0 0 0 0 x x x x x",
"0 0 0 0 0 0 0 0 o o o o o o o o";
;
memory "signature"
size = 3;
read = "0 0 1 1 0 0 0 0 0 0 0 x x x x x",
"x x x x x x a1 a0 o o o o o o o o";
;
;
#------------------------------------------------------------
# ATmega328
#------------------------------------------------------------
part
id = "m328";
desc = "ATmega328";
has_debugwire = yes;
flash_instr = 0xB6, 0x01, 0x11;
eeprom_instr = 0xBD, 0xF2, 0xBD, 0xE1, 0xBB, 0xCF, 0xB4, 0x00,
0xBE, 0x01, 0xB6, 0x01, 0xBC, 0x00, 0xBB, 0xBF,
0x99, 0xF9, 0xBB, 0xAF;
stk500_devcode = 0x86;
# avr910_devcode = 0x;
signature = 0x1e 0x95 0x14;
pagel = 0xd7;
bs2 = 0xc2;
chip_erase_delay = 9000;
pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1",
"x x x x x x x x x x x x x x x x";
chip_erase = "1 0 1 0 1 1 0 0 1 0 0 x x x x x",
"x x x x x x x x x x x x x x x x";
timeout = 200;
stabdelay = 100;
cmdexedelay = 25;
synchloops = 32;
bytedelay = 0;
pollindex = 3;
pollvalue = 0x53;
predelay = 1;
postdelay = 1;
pollmethod = 1;
pp_controlstack =
0x0E, 0x1E, 0x0F, 0x1F, 0x2E, 0x3E, 0x2F, 0x3F,
0x4E, 0x5E, 0x4F, 0x5F, 0x6E, 0x7E, 0x6F, 0x7F,
0x66, 0x76, 0x67, 0x77, 0x6A, 0x7A, 0x6B, 0x7B,
0xBE, 0xFD, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00;
hventerstabdelay = 100;
progmodedelay = 0;
latchcycles = 5;
togglevtg = 1;
poweroffdelay = 15;
resetdelayms = 1;
resetdelayus = 0;
hvleavestabdelay = 15;
resetdelay = 15;
chiperasepulsewidth = 0;
chiperasepolltimeout = 10;
programfusepulsewidth = 0;
programfusepolltimeout = 5;
programlockpulsewidth = 0;
programlockpolltimeout = 5;
ocdrev = 1;
memory "eeprom"
paged = no;
page_size = 4;
size = 1024;
min_write_delay = 3600;
max_write_delay = 3600;
readback_p1 = 0xff;
readback_p2 = 0xff;
read = " 1 0 1 0 0 0 0 0",
" 0 0 0 x x x a9 a8",
" a7 a6 a5 a4 a3 a2 a1 a0",
" o o o o o o o o";
write = " 1 1 0 0 0 0 0 0",
" 0 0 0 x x x a9 a8",
" a7 a6 a5 a4 a3 a2 a1 a0",
" i i i i i i i i";
loadpage_lo = " 1 1 0 0 0 0 0 1",
" 0 0 0 0 0 0 0 0",
" 0 0 0 0 0 0 a1 a0",
" i i i i i i i i";
writepage = " 1 1 0 0 0 0 1 0",
" 0 0 x x x x a9 a8",
" a7 a6 a5 a4 a3 a2 0 0",
" x x x x x x x x";
mode = 0x41;
delay = 20;
blocksize = 4;
readsize = 256;
;
memory "flash"
paged = yes;
size = 32768;
page_size = 128;
num_pages = 256;
min_write_delay = 4500;
max_write_delay = 4500;
readback_p1 = 0xff;
readback_p2 = 0xff;
read_lo = " 0 0 1 0 0 0 0 0",
" 0 0 a13 a12 a11 a10 a9 a8",
" a7 a6 a5 a4 a3 a2 a1 a0",
" o o o o o o o o";
read_hi = " 0 0 1 0 1 0 0 0",
" 0 0 a13 a12 a11 a10 a9 a8",
" a7 a6 a5 a4 a3 a2 a1 a0",
" o o o o o o o o";
loadpage_lo = " 0 1 0 0 0 0 0 0",
" 0 0 0 x x x x x",
" x x a5 a4 a3 a2 a1 a0",
" i i i i i i i i";
loadpage_hi = " 0 1 0 0 1 0 0 0",
" 0 0 0 x x x x x",
" x x a5 a4 a3 a2 a1 a0",
" i i i i i i i i";
writepage = " 0 1 0 0 1 1 0 0",
" 0 0 a13 a12 a11 a10 a9 a8",
" a7 a6 x x x x x x",
" x x x x x x x x";
mode = 0x41;
delay = 6;
blocksize = 128;
readsize = 256;
;
memory "lfuse"
size = 1;
min_write_delay = 4500;
max_write_delay = 4500;
read = "0 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0",
"x x x x x x x x o o o o o o o o";
write = "1 0 1 0 1 1 0 0 1 0 1 0 0 0 0 0",
"x x x x x x x x i i i i i i i i";
;
memory "hfuse"
size = 1;
min_write_delay = 4500;
max_write_delay = 4500;
read = "0 1 0 1 1 0 0 0 0 0 0 0 1 0 0 0",
"x x x x x x x x o o o o o o o o";
write = "1 0 1 0 1 1 0 0 1 0 1 0 1 0 0 0",
"x x x x x x x x i i i i i i i i";
;
memory "efuse"
size = 1;
min_write_delay = 4500;
max_write_delay = 4500;
read = "0 1 0 1 0 0 0 0 0 0 0 0 1 0 0 0",
"x x x x x x x x x x x x x o o o";
write = "1 0 1 0 1 1 0 0 1 0 1 0 0 1 0 0",
"x x x x x x x x x x x x x i i i";
;
memory "lock"
size = 1;
min_write_delay = 4500;
max_write_delay = 4500;
read = "0 1 0 1 1 0 0 0 0 0 0 0 0 0 0 0",
"x x x x x x x x x x o o o o o o";
write = "1 0 1 0 1 1 0 0 1 1 1 x x x x x",
"x x x x x x x x 1 1 i i i i i i";
;
memory "calibration"
size = 1;
read = "0 0 1 1 1 0 0 0 0 0 0 x x x x x",
"0 0 0 0 0 0 0 0 o o o o o o o o";
;
memory "signature"
size = 3;
read = "0 0 1 1 0 0 0 0 0 0 0 x x x x x",
"x x x x x x a1 a0 o o o o o o o o";
;
;
part parent "m328"
id = "m328p";
desc = "ATmega328P";
signature = 0x1e 0x95 0x0F;
ocdrev = 1;
;
#------------------------------------------------------------
# ATtiny2313
#------------------------------------------------------------
part
id = "t2313";
desc = "ATtiny2313";
has_debugwire = yes;
flash_instr = 0xB2, 0x0F, 0x1F;
eeprom_instr = 0xBB, 0xFE, 0xBB, 0xEE, 0xBB, 0xCC, 0xB2, 0x0D,
0xBA, 0x0F, 0xB2, 0x0F, 0xBA, 0x0D, 0xBB, 0xBC,
0x99, 0xE1, 0xBB, 0xAC;
stk500_devcode = 0x23;
## Use the ATtiny26 devcode:
avr910_devcode = 0x5e;
signature = 0x1e 0x91 0x0a;
pagel = 0xD4;
bs2 = 0xD6;
reset = io;
chip_erase_delay = 9000;
pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1",
"x x x x x x x x x x x x x x x x";
chip_erase = "1 0 1 0 1 1 0 0 1 0 0 x x x x x",
"x x x x x x x x x x x x x x x x";
timeout = 200;
stabdelay = 100;
cmdexedelay = 25;
synchloops = 32;
bytedelay = 0;
pollindex = 3;
pollvalue = 0x53;
predelay = 1;
postdelay = 1;
pollmethod = 1;
pp_controlstack =
0x0E, 0x1E, 0x0E, 0x1E, 0x2E, 0x3E, 0x2E, 0x3E,
0x4E, 0x5E, 0x4E, 0x5E, 0x6E, 0x7E, 0x6E, 0x7E,
0x26, 0x36, 0x66, 0x76, 0x2A, 0x3A, 0x6A, 0x7A,
0x2E, 0xFD, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00;
hventerstabdelay = 100;
progmodedelay = 0;
latchcycles = 5;
togglevtg = 1;
poweroffdelay = 15;
resetdelayms = 1;
resetdelayus = 0;
hvleavestabdelay = 15;
chiperasepulsewidth = 0;
chiperasepolltimeout = 10;
programfusepulsewidth = 0;
programfusepolltimeout = 5;
programlockpulsewidth = 0;
programlockpolltimeout = 5;
ocdrev = 0;
memory "eeprom"
size = 128;
paged = no;
page_size = 4;
min_write_delay = 4000;
max_write_delay = 4500;
readback_p1 = 0xff;
readback_p2 = 0xff;
read = "1 0 1 0 0 0 0 0 0 0 0 x x x x x",
"x a6 a5 a4 a3 a2 a1 a0 o o o o o o o o";
write = "1 1 0 0 0 0 0 0 0 0 0 x x x x x",
"x a6 a5 a4 a3 a2 a1 a0 i i i i i i i i";
loadpage_lo = " 1 1 0 0 0 0 0 1",
" 0 0 0 0 0 0 0 0",
" 0 0 0 0 0 0 a1 a0",
" i i i i i i i i";
writepage = " 1 1 0 0 0 0 1 0",
" 0 0 x x x x x x",
" x a6 a5 a4 a3 a2 0 0",
" x x x x x x x x";
mode = 0x41;
delay = 6;
blocksize = 4;
readsize = 256;
;
memory "flash"
paged = yes;
size = 2048;
page_size = 32;
num_pages = 64;
min_write_delay = 4500;
max_write_delay = 4500;
readback_p1 = 0xff;
readback_p2 = 0xff;
read_lo = " 0 0 1 0 0 0 0 0",
" 0 0 0 0 0 0 a9 a8",
" a7 a6 a5 a4 a3 a2 a1 a0",
" o o o o o o o o";
read_hi = " 0 0 1 0 1 0 0 0",
" 0 0 0 0 0 0 a9 a8",
" a7 a6 a5 a4 a3 a2 a1 a0",
" o o o o o o o o";
# The information in the data sheet of April/2004 is wrong, this works:
loadpage_lo = " 0 1 0 0 0 0 0 0",
" 0 0 0 x x x x x",
" x x x x a3 a2 a1 a0",
" i i i i i i i i";
# The information in the data sheet of April/2004 is wrong, this works:
loadpage_hi = " 0 1 0 0 1 0 0 0",
" 0 0 0 x x x x x",
" x x x x a3 a2 a1 a0",
" i i i i i i i i";
# The information in the data sheet of April/2004 is wrong, this works:
writepage = " 0 1 0 0 1 1 0 0",
" 0 0 0 0 0 0 a9 a8",
" a7 a6 a5 a4 x x x x",
" x x x x x x x x";
mode = 0x41;
delay = 6;
blocksize = 32;
readsize = 256;
;
# ATtiny2313 has Signature Bytes: 0x1E 0x91 0x0A.
memory "signature"
size = 3;
read = "0 0 1 1 0 0 0 0 0 0 0 x x x x x",
"x x x x x x a1 a0 o o o o o o o o";
;
memory "lock"
size = 1;
write = "1 0 1 0 1 1 0 0 1 1 1 x x x x x",
"x x x x x x x x 1 1 i i i i i i";
read = "0 1 0 1 1 0 0 0 0 0 0 0 0 0 0 0",
"x x x x x x x x x x o o o o o o";
min_write_delay = 9000;
max_write_delay = 9000;
;
memory "lfuse"
size = 1;
write = "1 0 1 0 1 1 0 0 1 0 1 0 0 0 0 0",
"x x x x x x x x i i i i i i i i";
read = "0 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0",
"x x x x x x x x o o o o o o o o";
min_write_delay = 9000;
max_write_delay = 9000;
;
memory "hfuse"
size = 1;
write = "1 0 1 0 1 1 0 0 1 0 1 0 1 0 0 0",
"x x x x x x x x i i i i i i i i";
read = "0 1 0 1 1 0 0 0 0 0 0 0 1 0 0 0",
"x x x x x x x x o o o o o o o o";
min_write_delay = 9000;
max_write_delay = 9000;
;
memory "efuse"
size = 1;
write = "1 0 1 0 1 1 0 0 1 0 1 0 0 1 0 0",
"x x x x x x x x x x x x x x x i";
read = "0 1 0 1 0 0 0 0 0 0 0 0 1 0 0 0",
"x x x x x x x x o o o o o o o o";
min_write_delay = 9000;
max_write_delay = 9000;
;
# The Tiny2313 has calibration data for both 4 MHz and 8 MHz.
# The information in the data sheet of April/2004 is wrong, this works:
memory "calibration"
size = 2;
read = "0 0 1 1 1 0 0 0 0 0 0 x x x x x",
"0 0 0 0 0 0 0 a0 o o o o o o o o";
;
;
#------------------------------------------------------------
# ATtiny4313
#------------------------------------------------------------
part
id = "t4313";
desc = "ATtiny4313";
has_debugwire = yes;
flash_instr = 0xB2, 0x0F, 0x1F;
eeprom_instr = 0xBB, 0xFE, 0xBB, 0xEE, 0xBB, 0xCC, 0xB2, 0x0D,
0xBA, 0x0F, 0xB2, 0x0F, 0xBA, 0x0D, 0xBB, 0xBC,
0x99, 0xE1, 0xBB, 0xAC;
stk500_devcode = 0x23;
## Use the ATtiny26 devcode:
avr910_devcode = 0x5e;
signature = 0x1e 0x92 0x0d;
pagel = 0xD4;
bs2 = 0xD6;
reset = io;
chip_erase_delay = 9000;
pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1",
"x x x x x x x x x x x x x x x x";
chip_erase = "1 0 1 0 1 1 0 0 1 0 0 x x x x x",
"x x x x x x x x x x x x x x x x";
timeout = 200;
stabdelay = 100;
cmdexedelay = 25;
synchloops = 32;
bytedelay = 0;
pollindex = 3;
pollvalue = 0x53;
predelay = 1;
postdelay = 1;
pollmethod = 1;
pp_controlstack =
0x0E, 0x1E, 0x0E, 0x1E, 0x2E, 0x3E, 0x2E, 0x3E,
0x4E, 0x5E, 0x4E, 0x5E, 0x6E, 0x7E, 0x6E, 0x7E,
0x26, 0x36, 0x66, 0x76, 0x2A, 0x3A, 0x6A, 0x7A,
0x2E, 0xFD, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00;
hventerstabdelay = 100;
progmodedelay = 0;
latchcycles = 5;
togglevtg = 1;
poweroffdelay = 15;
resetdelayms = 1;
resetdelayus = 0;
hvleavestabdelay = 15;
chiperasepulsewidth = 0;
chiperasepolltimeout = 10;
programfusepulsewidth = 0;
programfusepolltimeout = 5;
programlockpulsewidth = 0;
programlockpolltimeout = 5;
ocdrev = 0;
memory "eeprom"
size = 256;
paged = no;
page_size = 4;
min_write_delay = 4000;
max_write_delay = 4500;
readback_p1 = 0xff;
readback_p2 = 0xff;
read = "1 0 1 0 0 0 0 0 0 0 0 x x x x x",
"a7 a6 a5 a4 a3 a2 a1 a0 o o o o o o o o";
write = "1 1 0 0 0 0 0 0 0 0 0 x x x x x",
"a7 a6 a5 a4 a3 a2 a1 a0 i i i i i i i i";
loadpage_lo = " 1 1 0 0 0 0 0 1",
" 0 0 0 0 0 0 0 0",
" 0 0 0 0 0 0 a1 a0",
" i i i i i i i i";
writepage = " 1 1 0 0 0 0 1 0",
" 0 0 x x x x x x",
" a7 a6 a5 a4 a3 a2 0 0",
" x x x x x x x x";
mode = 0x41;
delay = 6;
blocksize = 4;
readsize = 256;
;
memory "flash"
paged = yes;
size = 4096;
page_size = 64;
num_pages = 64;
min_write_delay = 4500;
max_write_delay = 4500;
readback_p1 = 0xff;
readback_p2 = 0xff;
read_lo = " 0 0 1 0 0 0 0 0",
" 0 0 0 0 0 a10 a9 a8",
" a7 a6 a5 a4 a3 a2 a1 a0",
" o o o o o o o o";
read_hi = " 0 0 1 0 1 0 0 0",
" 0 0 0 0 0 a10 a9 a8",
" a7 a6 a5 a4 a3 a2 a1 a0",
" o o o o o o o o";
loadpage_lo = " 0 1 0 0 0 0 0 0",
" 0 0 0 x x x x x",
" x x x a4 a3 a2 a1 a0",
" i i i i i i i i";
loadpage_hi = " 0 1 0 0 1 0 0 0",
" 0 0 0 x x x x x",
" x x x a4 a3 a2 a1 a0",
" i i i i i i i i";
writepage = " 0 1 0 0 1 1 0 0",
" 0 0 0 0 0 a10 a9 a8",
" a7 a6 a5 x x x x x",
" x x x x x x x x";
mode = 0x41;
delay = 6;
blocksize = 32;
readsize = 256;
;
# ATtiny4313 has Signature Bytes: 0x1E 0x92 0x0D.
memory "signature"
size = 3;
read = "0 0 1 1 0 0 0 0 0 0 0 x x x x x",
"x x x x x x a1 a0 o o o o o o o o";
;
memory "lock"
size = 1;
write = "1 0 1 0 1 1 0 0 1 1 1 x x x x x",
"x x x x x x x x 1 1 i i i i i i";
read = "0 1 0 1 1 0 0 0 0 0 0 0 0 0 0 0",
"x x x x x x x x x x o o o o o o";
min_write_delay = 9000;
max_write_delay = 9000;
;
memory "lfuse"
size = 1;
write = "1 0 1 0 1 1 0 0 1 0 1 0 0 0 0 0",
"x x x x x x x x i i i i i i i i";
read = "0 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0",
"x x x x x x x x o o o o o o o o";
min_write_delay = 9000;
max_write_delay = 9000;
;
memory "hfuse"
size = 1;
write = "1 0 1 0 1 1 0 0 1 0 1 0 1 0 0 0",
"x x x x x x x x i i i i i i i i";
read = "0 1 0 1 1 0 0 0 0 0 0 0 1 0 0 0",
"x x x x x x x x o o o o o o o o";
min_write_delay = 9000;
max_write_delay = 9000;
;
memory "efuse"
size = 1;
write = "1 0 1 0 1 1 0 0 1 0 1 0 0 1 0 0",
"x x x x x x x x x x x x x x x i";
read = "0 1 0 1 0 0 0 0 0 0 0 0 1 0 0 0",
"x x x x x x x x o o o o o o o o";
min_write_delay = 9000;
max_write_delay = 9000;
;
memory "calibration"
size = 2;
read = "0 0 1 1 1 0 0 0 0 0 0 x x x x x",
"0 0 0 0 0 0 0 a0 o o o o o o o o";
;
;
#------------------------------------------------------------
# AT90PWM2
#------------------------------------------------------------
part
id = "pwm2";
desc = "AT90PWM2";
has_debugwire = yes;
flash_instr = 0xB6, 0x01, 0x11;
eeprom_instr = 0xBD, 0xF2, 0xBD, 0xE1, 0xBB, 0xCF, 0xB4, 0x00,
0xBE, 0x01, 0xB6, 0x01, 0xBC, 0x00, 0xBB, 0xBF,
0x99, 0xF9, 0xBB, 0xAF;
stk500_devcode = 0x65;
## avr910_devcode = ?;
signature = 0x1e 0x93 0x81;
pagel = 0xD8;
bs2 = 0xE2;
reset = io;
chip_erase_delay = 9000;
pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1",
"x x x x x x x x x x x x x x x x";
chip_erase = "1 0 1 0 1 1 0 0 1 0 0 x x x x x",
"x x x x x x x x x x x x x x x x";
timeout = 200;
stabdelay = 100;
cmdexedelay = 25;
synchloops = 32;
bytedelay = 0;
pollindex = 3;
pollvalue = 0x53;
predelay = 1;
postdelay = 1;
pollmethod = 1;
pp_controlstack =
0x0E, 0x1E, 0x0F, 0x1F, 0x2E, 0x3E, 0x2F, 0x3F,
0x4E, 0x5E, 0x4F, 0x5F, 0x6E, 0x7E, 0x6F, 0x7F,
0x66, 0x76, 0x67, 0x77, 0x6A, 0x7A, 0x6B, 0x7B,
0xBE, 0xFD, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00;
hventerstabdelay = 100;
progmodedelay = 0;
latchcycles = 5;
togglevtg = 1;
poweroffdelay = 15;
resetdelayms = 1;
resetdelayus = 0;
hvleavestabdelay = 15;
chiperasepulsewidth = 0;
chiperasepolltimeout = 10;
programfusepulsewidth = 0;
programfusepolltimeout = 5;
programlockpulsewidth = 0;
programlockpolltimeout = 5;
memory "eeprom"
size = 512;
paged = no;
page_size = 4;
min_write_delay = 4000;
max_write_delay = 4500;
readback_p1 = 0xff;
readback_p2 = 0xff;
read = "1 0 1 0 0 0 0 0 0 0 0 x x x x a8",
"a7 a6 a5 a4 a3 a2 a1 a0 o o o o o o o o";
write = "1 1 0 0 0 0 0 0 0 0 0 x x x x a8",
"a7 a6 a5 a4 a3 a2 a1 a0 i i i i i i i i";
loadpage_lo = " 1 1 0 0 0 0 0 1",
" 0 0 0 0 0 0 0 0",
" 0 0 0 0 0 0 a1 a0",
" i i i i i i i i";
writepage = " 1 1 0 0 0 0 1 0",
" 0 0 x x x x x x",
" a7 a6 a5 a4 a3 a2 0 0",
" x x x x x x x x";
mode = 0x41;
delay = 6;
blocksize = 4;
readsize = 256;
;
memory "flash"
paged = yes;
size = 8192;
page_size = 64;
num_pages = 128;
min_write_delay = 4500;
max_write_delay = 4500;
readback_p1 = 0xff;
readback_p2 = 0xff;
read_lo = " 0 0 1 0 0 0 0 0",
" 0 0 0 0 a11 a10 a9 a8",
" a7 a6 a5 a4 a3 a2 a1 a0",
" o o o o o o o o";
read_hi = " 0 0 1 0 1 0 0 0",
" 0 0 0 0 a11 a10 a9 a8",
" a7 a6 a5 a4 a3 a2 a1 a0",
" o o o o o o o o";
loadpage_lo = " 0 1 0 0 0 0 0 0",
" 0 0 0 x x x x x",
" x x x a4 a3 a2 a1 a0",
" i i i i i i i i";
loadpage_hi = " 0 1 0 0 1 0 0 0",
" 0 0 0 x x x x x",
" x x x a4 a3 a2 a1 a0",
" i i i i i i i i";
writepage = " 0 1 0 0 1 1 0 0",
" 0 0 0 0 a11 a10 a9 a8",
" a7 a6 a5 x x x x x",
" x x x x x x x x";
mode = 0x41;
delay = 6;
blocksize = 64;
readsize = 256;
;
# AT90PWM2 has Signature Bytes: 0x1E 0x93 0x81.
memory "signature"
size = 3;
read = "0 0 1 1 0 0 0 0 0 0 x x x x x x",
"x x x x x x a1 a0 o o o o o o o o";
;
memory "lock"
size = 1;
write = "1 0 1 0 1 1 0 0 1 1 1 x x x x x",
"x x x x x x x x 1 1 i i i i i i";
read = "0 1 0 1 1 0 0 0 0 0 0 0 0 0 0 0",
"x x x x x x x x x x o o o o o o";
min_write_delay = 9000;
max_write_delay = 9000;
;
memory "lfuse"
size = 1;
write = "1 0 1 0 1 1 0 0 1 0 1 0 0 0 0 0",
"x x x x x x x x i i i i i i i i";
read = "0 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0",
"x x x x x x x x o o o o o o o o";
min_write_delay = 9000;
max_write_delay = 9000;
;
memory "hfuse"
size = 1;
write = "1 0 1 0 1 1 0 0 1 0 1 0 1 0 0 0",
"x x x x x x x x i i i i i i i i";
read = "0 1 0 1 1 0 0 0 0 0 0 0 1 0 0 0",
"x x x x x x x x o o o o o o o o";
min_write_delay = 9000;
max_write_delay = 9000;
;
memory "efuse"
size = 1;
write = "1 0 1 0 1 1 0 0 1 0 1 0 0 1 0 0",
"x x x x x x x x i i i i i i i i";
read = "0 1 0 1 0 0 0 0 0 0 0 0 1 0 0 0",
"x x x x x x x x o o o o o o o o";
min_write_delay = 9000;
max_write_delay = 9000;
;
memory "calibration"
size = 1;
read = "0 0 1 1 1 0 0 0 0 0 0 x x x x x",
"0 0 0 0 0 0 0 0 o o o o o o o o";
;
;
#------------------------------------------------------------
# AT90PWM3
#------------------------------------------------------------
# Completely identical to AT90PWM2 (including the signature!)
part parent "pwm2"
id = "pwm3";
desc = "AT90PWM3";
;
#------------------------------------------------------------
# AT90PWM2B
#------------------------------------------------------------
# Same as AT90PWM2 but different signature.
part parent "pwm2"
id = "pwm2b";
desc = "AT90PWM2B";
signature = 0x1e 0x93 0x83;
ocdrev = 1;
;
#------------------------------------------------------------
# AT90PWM3B
#------------------------------------------------------------
# Completely identical to AT90PWM2B (including the signature!)
part parent "pwm2b"
id = "pwm3b";
desc = "AT90PWM3B";
ocdrev = 1;
;
#------------------------------------------------------------
# AT90PWM316
#------------------------------------------------------------
# Similar to AT90PWM3B, but with 16 kiB flash, 512 B EEPROM, and 1024 B SRAM.
part parent "pwm3b"
id = "pwm316";
desc = "AT90PWM316";
signature = 0x1e 0x94 0x83;
ocdrev = 1;
memory "flash"
paged = yes;
size = 16384;
page_size = 128;
num_pages = 128;
min_write_delay = 4500;
max_write_delay = 4500;
readback_p1 = 0xff;
readback_p2 = 0xff;
read_lo = " 0 0 1 0 0 0 0 0",
" 0 0 a13 a12 a11 a10 a9 a8",
" a7 a6 a5 a4 a3 a2 a1 a0",
" o o o o o o o o";
read_hi = " 0 0 1 0 1 0 0 0",
" 0 0 a13 a12 a11 a10 a9 a8",
" a7 a6 a5 a4 a3 a2 a1 a0",
" o o o o o o o o";
loadpage_lo = " 0 1 0 0 0 0 0 0",
" 0 0 x x x x x x",
" x x a5 a4 a3 a2 a1 a0",
" i i i i i i i i";
loadpage_hi = " 0 1 0 0 1 0 0 0",
" 0 0 x x x x x x",
" x x a5 a4 a3 a2 a1 a0",
" i i i i i i i i";
writepage = " 0 1 0 0 1 1 0 0",
" 0 0 a13 a12 a11 a10 a9 a8",
" a7 a6 x x x x x x",
" x x x x x x x x";
mode = 0x21;
delay = 6;
blocksize = 128;
readsize = 256;
;
;
#------------------------------------------------------------
# ATtiny25
#------------------------------------------------------------
part
id = "t25";
desc = "ATtiny25";
has_debugwire = yes;
flash_instr = 0xB4, 0x02, 0x12;
eeprom_instr = 0xBB, 0xFF, 0xBB, 0xEE, 0xBB, 0xCC, 0xB2, 0x0D,
0xBC, 0x02, 0xB4, 0x02, 0xBA, 0x0D, 0xBB, 0xBC,
0x99, 0xE1, 0xBB, 0xAC;
## no STK500 devcode in XML file, use the ATtiny45 one
stk500_devcode = 0x14;
## avr910_devcode = ?;
## Try the AT90S2313 devcode:
avr910_devcode = 0x20;
signature = 0x1e 0x91 0x08;
reset = io;
chip_erase_delay = 4500;
pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1",
"x x x x x x x x x x x x x x x x";
chip_erase = "1 0 1 0 1 1 0 0 1 0 0 x x x x x",
"x x x x x x x x x x x x x x x x";
timeout = 200;
stabdelay = 100;
cmdexedelay = 25;
synchloops = 32;
bytedelay = 0;
pollindex = 3;
pollvalue = 0x53;
predelay = 1;
postdelay = 1;
pollmethod = 1;
hvsp_controlstack =
0x4C, 0x0C, 0x1C, 0x2C, 0x3C, 0x64, 0x74, 0x66,
0x68, 0x78, 0x68, 0x68, 0x7A, 0x6A, 0x68, 0x78,
0x78, 0x7D, 0x6D, 0x0C, 0x80, 0x40, 0x20, 0x10,
0x11, 0x08, 0x04, 0x02, 0x03, 0x08, 0x04, 0x00;
hventerstabdelay = 100;
hvspcmdexedelay = 0;
synchcycles = 6;
latchcycles = 1;
togglevtg = 1;
poweroffdelay = 25;
resetdelayms = 1;
resetdelayus = 0;
hvleavestabdelay = 100;
resetdelay = 25;
chiperasepolltimeout = 40;
chiperasetime = 0;
programfusepolltimeout = 25;
programlockpolltimeout = 25;
ocdrev = 1;
memory "eeprom"
size = 128;
paged = no;
page_size = 4;
min_write_delay = 4000;
max_write_delay = 4500;
readback_p1 = 0xff;
readback_p2 = 0xff;
read = "1 0 1 0 0 0 0 0 0 0 0 x x x x x",
"x a6 a5 a4 a3 a2 a1 a0 o o o o o o o o";
write = "1 1 0 0 0 0 0 0 0 0 0 x x x x x",
"x a6 a5 a4 a3 a2 a1 a0 i i i i i i i i";
loadpage_lo = " 1 1 0 0 0 0 0 1",
" 0 0 0 0 0 0 0 0",
" 0 0 0 0 0 0 a1 a0",
" i i i i i i i i";
writepage = " 1 1 0 0 0 0 1 0",
" 0 0 x x x x x x",
" x a6 a5 a4 a3 a2 0 0",
" x x x x x x x x";
mode = 0x41;
delay = 6;
blocksize = 4;
readsize = 256;
;
memory "flash"
paged = yes;
size = 2048;
page_size = 32;
num_pages = 64;
min_write_delay = 4500;
max_write_delay = 4500;
readback_p1 = 0xff;
readback_p2 = 0xff;
read_lo = " 0 0 1 0 0 0 0 0",
" 0 0 0 0 0 0 a9 a8",
" a7 a6 a5 a4 a3 a2 a1 a0",
" o o o o o o o o";
read_hi = " 0 0 1 0 1 0 0 0",
" 0 0 0 0 0 0 a9 a8",
" a7 a6 a5 a4 a3 a2 a1 a0",
" o o o o o o o o";
loadpage_lo = " 0 1 0 0 0 0 0 0",
" 0 0 0 x x x x x",
" x x x x a3 a2 a1 a0",
" i i i i i i i i";
loadpage_hi = " 0 1 0 0 1 0 0 0",
" 0 0 0 x x x x x",
" x x x x a3 a2 a1 a0",
" i i i i i i i i";
writepage = " 0 1 0 0 1 1 0 0",
" 0 0 0 0 0 0 a9 a8",
" a7 a6 a5 a4 x x x x",
" x x x x x x x x";
mode = 0x41;
delay = 6;
blocksize = 32;
readsize = 256;
;
# ATtiny25 has Signature Bytes: 0x1E 0x91 0x08.
memory "signature"
size = 3;
read = "0 0 1 1 0 0 0 0 0 0 0 x x x x x",
"x x x x x x a1 a0 o o o o o o o o";
;
memory "lock"
size = 1;
write = "1 0 1 0 1 1 0 0 1 1 1 x x x x x",
"x x x x x x x x 1 1 i i i i i i";
min_write_delay = 9000;
max_write_delay = 9000;
;
memory "lfuse"
size = 1;
write = "1 0 1 0 1 1 0 0 1 0 1 0 0 0 0 0",
"x x x x x x x x i i i i i i i i";
read = "0 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0",
"x x x x x x x x o o o o o o o o";
min_write_delay = 9000;
max_write_delay = 9000;
;
memory "hfuse"
size = 1;
write = "1 0 1 0 1 1 0 0 1 0 1 0 1 0 0 0",
"x x x x x x x x i i i i i i i i";
read = "0 1 0 1 1 0 0 0 0 0 0 0 1 0 0 0",
"x x x x x x x x o o o o o o o o";
min_write_delay = 9000;
max_write_delay = 9000;
;
memory "efuse"
size = 1;
write = "1 0 1 0 1 1 0 0 1 0 1 0 0 1 0 0",
"x x x x x x x x x x x x x x x i";
read = "0 1 0 1 0 0 0 0 0 0 0 0 1 0 0 0",
"x x x x x x x x o o o o o o o o";
min_write_delay = 9000;
max_write_delay = 9000;
;
memory "calibration"
size = 2;
read = "0 0 1 1 1 0 0 0 0 0 0 x x x x x",
"0 0 0 0 0 0 0 a0 o o o o o o o o";
;
;
#------------------------------------------------------------
# ATtiny45
#------------------------------------------------------------
part
id = "t45";
desc = "ATtiny45";
has_debugwire = yes;
flash_instr = 0xB4, 0x02, 0x12;
eeprom_instr = 0xBB, 0xFF, 0xBB, 0xEE, 0xBB, 0xCC, 0xB2, 0x0D,
0xBC, 0x02, 0xB4, 0x02, 0xBA, 0x0D, 0xBB, 0xBC,
0x99, 0xE1, 0xBB, 0xAC;
stk500_devcode = 0x14;
## avr910_devcode = ?;
## Try the AT90S2313 devcode:
avr910_devcode = 0x20;
signature = 0x1e 0x92 0x06;
reset = io;
chip_erase_delay = 4500;
pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1",
"x x x x x x x x x x x x x x x x";
chip_erase = "1 0 1 0 1 1 0 0 1 0 0 x x x x x",
"x x x x x x x x x x x x x x x x";
timeout = 200;
stabdelay = 100;
cmdexedelay = 25;
synchloops = 32;
bytedelay = 0;
pollindex = 3;
pollvalue = 0x53;
predelay = 1;
postdelay = 1;
pollmethod = 1;
hvsp_controlstack =
0x4C, 0x0C, 0x1C, 0x2C, 0x3C, 0x64, 0x74, 0x66,
0x68, 0x78, 0x68, 0x68, 0x7A, 0x6A, 0x68, 0x78,
0x78, 0x7D, 0x6D, 0x0C, 0x80, 0x40, 0x20, 0x10,
0x11, 0x08, 0x04, 0x02, 0x03, 0x08, 0x04, 0x00;
hventerstabdelay = 100;
progmodedelay = 0;
hvspcmdexedelay = 0;
synchcycles = 6;
latchcycles = 1;
togglevtg = 1;
poweroffdelay = 25;
resetdelayms = 1;
resetdelayus = 0;
hvleavestabdelay = 100;
resetdelay = 25;
chiperasepolltimeout = 40;
chiperasetime = 0;
programfusepolltimeout = 25;
programlockpolltimeout = 25;
ocdrev = 1;
memory "eeprom"
size = 256;
page_size = 4;
min_write_delay = 4000;
max_write_delay = 4500;
readback_p1 = 0xff;
readback_p2 = 0xff;
read = "1 0 1 0 0 0 0 0 0 0 0 x x x x x",
"a7 a6 a5 a4 a3 a2 a1 a0 o o o o o o o o";
write = "1 1 0 0 0 0 0 0 0 0 0 x x x x x",
"a7 a6 a5 a4 a3 a2 a1 a0 i i i i i i i i";
loadpage_lo = " 1 1 0 0 0 0 0 1",
" 0 0 0 0 0 0 0 0",
" 0 0 0 0 0 0 a1 a0",
" i i i i i i i i";
writepage = " 1 1 0 0 0 0 1 0",
" 0 0 x x x x x x",
" a7 a6 a5 a4 a3 a2 0 0",
" x x x x x x x x";
mode = 0x41;
delay = 6;
blocksize = 4;
readsize = 256;
;
memory "flash"
paged = yes;
size = 4096;
page_size = 64;
num_pages = 64;
min_write_delay = 4500;
max_write_delay = 4500;
readback_p1 = 0xff;
readback_p2 = 0xff;
read_lo = " 0 0 1 0 0 0 0 0",
" 0 0 0 0 0 a10 a9 a8",
" a7 a6 a5 a4 a3 a2 a1 a0",
" o o o o o o o o";
read_hi = " 0 0 1 0 1 0 0 0",
" 0 0 0 0 0 a10 a9 a8",
" a7 a6 a5 a4 a3 a2 a1 a0",
" o o o o o o o o";
loadpage_lo = " 0 1 0 0 0 0 0 0",
" 0 0 0 x x x x x",
" x x x a4 a3 a2 a1 a0",
" i i i i i i i i";
loadpage_hi = " 0 1 0 0 1 0 0 0",
" 0 0 0 x x x x x",
" x x x a4 a3 a2 a1 a0",
" i i i i i i i i";
writepage = " 0 1 0 0 1 1 0 0",
" 0 0 0 0 0 a10 a9 a8",
" a7 a6 a5 x x x x x",
" x x x x x x x x";
mode = 0x41;
delay = 6;
blocksize = 32;
readsize = 256;
;
# ATtiny45 has Signature Bytes: 0x1E 0x92 0x08. (Data sheet 2586C-AVR-06/05 (doc2586.pdf) indicates otherwise!)
memory "signature"
size = 3;
read = "0 0 1 1 0 0 0 0 0 0 0 x x x x x",
"x x x x x x a1 a0 o o o o o o o o";
;
memory "lock"
size = 1;
write = "1 0 1 0 1 1 0 0 1 1 1 x x x x x",
"x x x x x x x x 1 1 i i i i i i";
min_write_delay = 9000;
max_write_delay = 9000;
;
memory "lfuse"
size = 1;
write = "1 0 1 0 1 1 0 0 1 0 1 0 0 0 0 0",
"x x x x x x x x i i i i i i i i";
read = "0 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0",
"x x x x x x x x o o o o o o o o";
min_write_delay = 9000;
max_write_delay = 9000;
;
memory "hfuse"
size = 1;
write = "1 0 1 0 1 1 0 0 1 0 1 0 1 0 0 0",
"x x x x x x x x i i i i i i i i";
read = "0 1 0 1 1 0 0 0 0 0 0 0 1 0 0 0",
"x x x x x x x x o o o o o o o o";
min_write_delay = 9000;
max_write_delay = 9000;
;
memory "efuse"
size = 1;
write = "1 0 1 0 1 1 0 0 1 0 1 0 0 1 0 0",
"x x x x x x x x x x x x x x x i";
read = "0 1 0 1 0 0 0 0 0 0 0 0 1 0 0 0",
"x x x x x x x x o o o o o o o o";
min_write_delay = 9000;
max_write_delay = 9000;
;
memory "calibration"
size = 2;
read = "0 0 1 1 1 0 0 0 0 0 0 x x x x x",
"0 0 0 0 0 0 0 a0 o o o o o o o o";
;
;
#------------------------------------------------------------
# ATtiny85
#------------------------------------------------------------
part
id = "t85";
desc = "ATtiny85";
has_debugwire = yes;
flash_instr = 0xB4, 0x02, 0x12;
eeprom_instr = 0xBB, 0xFF, 0xBB, 0xEE, 0xBB, 0xCC, 0xB2, 0x0D,
0xBC, 0x02, 0xB4, 0x02, 0xBA, 0x0D, 0xBB, 0xBC,
0x99, 0xE1, 0xBB, 0xAC;
## no STK500 devcode in XML file, use the ATtiny45 one
stk500_devcode = 0x14;
## avr910_devcode = ?;
## Try the AT90S2313 devcode:
avr910_devcode = 0x20;
signature = 0x1e 0x93 0x0b;
reset = io;
chip_erase_delay = 4500;
pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1",
"x x x x x x x x x x x x x x x x";
chip_erase = "1 0 1 0 1 1 0 0 1 0 0 x x x x x",
"x x x x x x x x x x x x x x x x";
timeout = 200;
stabdelay = 100;
cmdexedelay = 25;
synchloops = 32;
bytedelay = 0;
pollindex = 3;
pollvalue = 0x53;
predelay = 1;
postdelay = 1;
pollmethod = 1;
hvsp_controlstack =
0x4C, 0x0C, 0x1C, 0x2C, 0x3C, 0x64, 0x74, 0x66,
0x68, 0x78, 0x68, 0x68, 0x7A, 0x6A, 0x68, 0x78,
0x78, 0x7D, 0x6D, 0x0C, 0x80, 0x40, 0x20, 0x10,
0x11, 0x08, 0x04, 0x02, 0x03, 0x08, 0x04, 0x00;
hventerstabdelay = 100;
hvspcmdexedelay = 0;
synchcycles = 6;
latchcycles = 1;
togglevtg = 1;
poweroffdelay = 25;
resetdelayms = 1;
resetdelayus = 0;
hvleavestabdelay = 100;
resetdelay = 25;
chiperasepolltimeout = 40;
chiperasetime = 0;
programfusepolltimeout = 25;
programlockpolltimeout = 25;
ocdrev = 1;
memory "eeprom"
size = 512;
paged = no;
page_size = 4;
min_write_delay = 4000;
max_write_delay = 4500;
readback_p1 = 0xff;
readback_p2 = 0xff;
read = "1 0 1 0 0 0 0 0 0 0 0 x x x x a8",
"a7 a6 a5 a4 a3 a2 a1 a0 o o o o o o o o";
write = "1 1 0 0 0 0 0 0 0 0 0 x x x x a8",
"a7 a6 a5 a4 a3 a2 a1 a0 i i i i i i i i";
loadpage_lo = " 1 1 0 0 0 0 0 1",
" 0 0 0 0 0 0 0 0",
" 0 0 0 0 0 0 a1 a0",
" i i i i i i i i";
writepage = " 1 1 0 0 0 0 1 0",
" 0 0 x x x x x a8",
" a7 a6 a5 a4 a3 a2 0 0",
" x x x x x x x x";
mode = 0x41;
delay = 6;
blocksize = 4;
readsize = 256;
;
memory "flash"
paged = yes;
size = 8192;
page_size = 64;
num_pages = 128;
min_write_delay = 4500;
max_write_delay = 4500;
readback_p1 = 0xff;
readback_p2 = 0xff;
read_lo = " 0 0 1 0 0 0 0 0",
" 0 0 0 0 a11 a10 a9 a8",
" a7 a6 a5 a4 a3 a2 a1 a0",
" o o o o o o o o";
read_hi = " 0 0 1 0 1 0 0 0",
" 0 0 0 0 a11 a10 a9 a8",
" a7 a6 a5 a4 a3 a2 a1 a0",
" o o o o o o o o";
loadpage_lo = " 0 1 0 0 0 0 0 0",
" 0 0 0 x x x x x",
" x x x a4 a3 a2 a1 a0",
" i i i i i i i i";
loadpage_hi = " 0 1 0 0 1 0 0 0",
" 0 0 0 x x x x x",
" x x x a4 a3 a2 a1 a0",
" i i i i i i i i";
writepage = " 0 1 0 0 1 1 0 0",
" 0 0 0 0 a11 a10 a9 a8",
" a7 a6 a5 x x x x x",
" x x x x x x x x";
mode = 0x41;
delay = 6;
blocksize = 32;
readsize = 256;
;
# ATtiny85 has Signature Bytes: 0x1E 0x93 0x08.
memory "signature"
size = 3;
read = "0 0 1 1 0 0 0 0 0 0 0 x x x x x",
"x x x x x x a1 a0 o o o o o o o o";
;
memory "lock"
size = 1;
write = "1 0 1 0 1 1 0 0 1 1 1 x x x x x",
"x x x x x x x x 1 1 i i i i i i";
min_write_delay = 9000;
max_write_delay = 9000;
;
memory "lfuse"
size = 1;
write = "1 0 1 0 1 1 0 0 1 0 1 0 0 0 0 0",
"x x x x x x x x i i i i i i i i";
read = "0 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0",
"x x x x x x x x o o o o o o o o";
min_write_delay = 9000;
max_write_delay = 9000;
;
memory "hfuse"
size = 1;
write = "1 0 1 0 1 1 0 0 1 0 1 0 1 0 0 0",
"x x x x x x x x i i i i i i i i";
read = "0 1 0 1 1 0 0 0 0 0 0 0 1 0 0 0",
"x x x x x x x x o o o o o o o o";
min_write_delay = 9000;
max_write_delay = 9000;
;
memory "efuse"
size = 1;
write = "1 0 1 0 1 1 0 0 1 0 1 0 0 1 0 0",
"x x x x x x x x x x x x x x x i";
read = "0 1 0 1 0 0 0 0 0 0 0 0 1 0 0 0",
"x x x x x x x x o o o o o o o o";
min_write_delay = 9000;
max_write_delay = 9000;
;
memory "calibration"
size = 2;
read = "0 0 1 1 1 0 0 0 0 0 0 x x x x x",
"0 0 0 0 0 0 0 a0 o o o o o o o o";
;
;
#------------------------------------------------------------
# ATmega640
#------------------------------------------------------------
# Almost same as ATmega1280, except for different memory sizes
part
id = "m640";
desc = "ATmega640";
signature = 0x1e 0x96 0x08;
has_jtag = yes;
# stk500_devcode = 0xB2;
# avr910_devcode = 0x43;
chip_erase_delay = 9000;
pagel = 0xD7;
bs2 = 0xA0;
reset = dedicated;
pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1",
"x x x x x x x x x x x x x x x x";
chip_erase = "1 0 1 0 1 1 0 0 1 0 0 0 0 0 0 0",
"x x x x x x x x x x x x x x x x";
timeout = 200;
stabdelay = 100;
cmdexedelay = 25;
synchloops = 32;
bytedelay = 0;
pollindex = 3;
pollvalue = 0x53;
predelay = 1;
postdelay = 1;
pollmethod = 1;
pp_controlstack =
0x0E, 0x1E, 0x0F, 0x1F, 0x2E, 0x3E, 0x2F, 0x3F,
0x4E, 0x5E, 0x4F, 0x5F, 0x6E, 0x7E, 0x6F, 0x7F,
0x66, 0x76, 0x67, 0x77, 0x6A, 0x7A, 0x6B, 0x7B,
0xBE, 0xFD, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00;
hventerstabdelay = 100;
progmodedelay = 0;
latchcycles = 5;
togglevtg = 1;
poweroffdelay = 15;
resetdelayms = 1;
resetdelayus = 0;
hvleavestabdelay = 15;
chiperasepulsewidth = 0;
chiperasepolltimeout = 10;
programfusepulsewidth = 0;
programfusepolltimeout = 5;
programlockpulsewidth = 0;
programlockpolltimeout = 5;
idr = 0x31;
spmcr = 0x57;
rampz = 0x3b;
allowfullpagebitstream = no;
ocdrev = 3;
memory "eeprom"
paged = no; /* leave this "no" */
page_size = 8; /* for parallel programming */
size = 4096;
min_write_delay = 9000;
max_write_delay = 9000;
readback_p1 = 0x00;
readback_p2 = 0x00;
read = " 1 0 1 0 0 0 0 0",
" x x x x a11 a10 a9 a8",
" a7 a6 a5 a4 a3 a2 a1 a0",
" o o o o o o o o";
write = " 1 1 0 0 0 0 0 0",
" x x x x a11 a10 a9 a8",
" a7 a6 a5 a4 a3 a2 a1 a0",
" i i i i i i i i";
loadpage_lo = " 1 1 0 0 0 0 0 1",
" 0 0 0 0 0 0 0 0",
" 0 0 0 0 0 a2 a1 a0",
" i i i i i i i i";
writepage = " 1 1 0 0 0 0 1 0",
" 0 0 x x a11 a10 a9 a8",
" a7 a6 a5 a4 a3 0 0 0",
" x x x x x x x x";
mode = 0x41;
delay = 10;
blocksize = 8;
readsize = 256;
;
memory "flash"
paged = yes;
size = 65536;
page_size = 256;
num_pages = 256;
min_write_delay = 4500;
max_write_delay = 4500;
readback_p1 = 0x00;
readback_p2 = 0x00;
read_lo = " 0 0 1 0 0 0 0 0",
" 0 a14 a13 a12 a11 a10 a9 a8",
" a7 a6 a5 a4 a3 a2 a1 a0",
" o o o o o o o o";
read_hi = " 0 0 1 0 1 0 0 0",
" 0 a14 a13 a12 a11 a10 a9 a8",
" a7 a6 a5 a4 a3 a2 a1 a0",
" o o o o o o o o";
loadpage_lo = " 0 1 0 0 0 0 0 0",
" x x x x x x x x",
" x a6 a5 a4 a3 a2 a1 a0",
" i i i i i i i i";
loadpage_hi = " 0 1 0 0 1 0 0 0",
" x x x x x x x x",
" x a6 a5 a4 a3 a2 a1 a0",
" i i i i i i i i";
writepage = " 0 1 0 0 1 1 0 0",
" 0 a14 a13 a12 a11 a10 a9 a8",
" a7 x x x x x x x",
" x x x x x x x x";
mode = 0x41;
delay = 10;
blocksize = 256;
readsize = 256;
;
memory "lfuse"
size = 1;
write = "1 0 1 0 1 1 0 0 1 0 1 0 0 0 0 0",
"x x x x x x x x i i i i i i i i";
read = "0 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0",
"x x x x x x x x o o o o o o o o";
min_write_delay = 9000;
max_write_delay = 9000;
;
memory "hfuse"
size = 1;
write = "1 0 1 0 1 1 0 0 1 0 1 0 1 0 0 0",
"x x x x x x x x i i i i i i i i";
read = "0 1 0 1 1 0 0 0 0 0 0 0 1 0 0 0",
"x x x x x x x x o o o o o o o o";
min_write_delay = 9000;
max_write_delay = 9000;
;
memory "efuse"
size = 1;
write = "1 0 1 0 1 1 0 0 1 0 1 0 0 1 0 0",
"x x x x x x x x x x x x x i i i";
read = "0 1 0 1 0 0 0 0 0 0 0 0 1 0 0 0",
"x x x x x x x x o o o o o o o o";
min_write_delay = 9000;
max_write_delay = 9000;
;
memory "lock"
size = 1;
read = "0 1 0 1 1 0 0 0 0 0 0 0 0 0 0 0",
"x x x x x x x x x x o o o o o o";
write = "1 0 1 0 1 1 0 0 1 1 1 x x x x x",
"x x x x x x x x 1 1 i i i i i i";
min_write_delay = 9000;
max_write_delay = 9000;
;
memory "calibration"
size = 1;
read = "0 0 1 1 1 0 0 0 x x x x x x x x",
"0 0 0 0 0 0 0 0 o o o o o o o o";
;
memory "signature"
size = 3;
read = "0 0 1 1 0 0 0 0 x x x x x x x x",
"x x x x x x a1 a0 o o o o o o o o";
;
;
#------------------------------------------------------------
# ATmega1280
#------------------------------------------------------------
part
id = "m1280";
desc = "ATmega1280";
signature = 0x1e 0x97 0x03;
has_jtag = yes;
# stk500_devcode = 0xB2;
# avr910_devcode = 0x43;
chip_erase_delay = 9000;
pagel = 0xD7;
bs2 = 0xA0;
reset = dedicated;
pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1",
"x x x x x x x x x x x x x x x x";
chip_erase = "1 0 1 0 1 1 0 0 1 0 0 0 0 0 0 0",
"x x x x x x x x x x x x x x x x";
timeout = 200;
stabdelay = 100;
cmdexedelay = 25;
synchloops = 32;
bytedelay = 0;
pollindex = 3;
pollvalue = 0x53;
predelay = 1;
postdelay = 1;
pollmethod = 1;
pp_controlstack =
0x0E, 0x1E, 0x0F, 0x1F, 0x2E, 0x3E, 0x2F, 0x3F,
0x4E, 0x5E, 0x4F, 0x5F, 0x6E, 0x7E, 0x6F, 0x7F,
0x66, 0x76, 0x67, 0x77, 0x6A, 0x7A, 0x6B, 0x7B,
0xBE, 0xFD, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00;
hventerstabdelay = 100;
progmodedelay = 0;
latchcycles = 5;
togglevtg = 1;
poweroffdelay = 15;
resetdelayms = 1;
resetdelayus = 0;
hvleavestabdelay = 15;
chiperasepulsewidth = 0;
chiperasepolltimeout = 10;
programfusepulsewidth = 0;
programfusepolltimeout = 5;
programlockpulsewidth = 0;
programlockpolltimeout = 5;
idr = 0x31;
spmcr = 0x57;
rampz = 0x3b;
allowfullpagebitstream = no;
ocdrev = 3;
memory "eeprom"
paged = no; /* leave this "no" */
page_size = 8; /* for parallel programming */
size = 4096;
min_write_delay = 9000;
max_write_delay = 9000;
readback_p1 = 0x00;
readback_p2 = 0x00;
read = " 1 0 1 0 0 0 0 0",
" x x x x a11 a10 a9 a8",
" a7 a6 a5 a4 a3 a2 a1 a0",
" o o o o o o o o";
write = " 1 1 0 0 0 0 0 0",
" x x x x a11 a10 a9 a8",
" a7 a6 a5 a4 a3 a2 a1 a0",
" i i i i i i i i";
loadpage_lo = " 1 1 0 0 0 0 0 1",
" 0 0 0 0 0 0 0 0",
" 0 0 0 0 0 a2 a1 a0",
" i i i i i i i i";
writepage = " 1 1 0 0 0 0 1 0",
" 0 0 x x a11 a10 a9 a8",
" a7 a6 a5 a4 a3 0 0 0",
" x x x x x x x x";
mode = 0x41;
delay = 10;
blocksize = 8;
readsize = 256;
;
memory "flash"
paged = yes;
size = 131072;
page_size = 256;
num_pages = 512;
min_write_delay = 4500;
max_write_delay = 4500;
readback_p1 = 0x00;
readback_p2 = 0x00;
read_lo = " 0 0 1 0 0 0 0 0",
"a15 a14 a13 a12 a11 a10 a9 a8",
" a7 a6 a5 a4 a3 a2 a1 a0",
" o o o o o o o o";
read_hi = " 0 0 1 0 1 0 0 0",
"a15 a14 a13 a12 a11 a10 a9 a8",
" a7 a6 a5 a4 a3 a2 a1 a0",
" o o o o o o o o";
loadpage_lo = " 0 1 0 0 0 0 0 0",
" x x x x x x x x",
" x a6 a5 a4 a3 a2 a1 a0",
" i i i i i i i i";
loadpage_hi = " 0 1 0 0 1 0 0 0",
" x x x x x x x x",
" x a6 a5 a4 a3 a2 a1 a0",
" i i i i i i i i";
writepage = " 0 1 0 0 1 1 0 0",
"a15 a14 a13 a12 a11 a10 a9 a8",
" a7 x x x x x x x",
" x x x x x x x x";
mode = 0x41;
delay = 10;
blocksize = 256;
readsize = 256;
;
memory "lfuse"
size = 1;
write = "1 0 1 0 1 1 0 0 1 0 1 0 0 0 0 0",
"x x x x x x x x i i i i i i i i";
read = "0 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0",
"x x x x x x x x o o o o o o o o";
min_write_delay = 9000;
max_write_delay = 9000;
;
memory "hfuse"
size = 1;
write = "1 0 1 0 1 1 0 0 1 0 1 0 1 0 0 0",
"x x x x x x x x i i i i i i i i";
read = "0 1 0 1 1 0 0 0 0 0 0 0 1 0 0 0",
"x x x x x x x x o o o o o o o o";
min_write_delay = 9000;
max_write_delay = 9000;
;
memory "efuse"
size = 1;
write = "1 0 1 0 1 1 0 0 1 0 1 0 0 1 0 0",
"x x x x x x x x x x x x x i i i";
read = "0 1 0 1 0 0 0 0 0 0 0 0 1 0 0 0",
"x x x x x x x x o o o o o o o o";
min_write_delay = 9000;
max_write_delay = 9000;
;
memory "lock"
size = 1;
read = "0 1 0 1 1 0 0 0 0 0 0 0 0 0 0 0",
"x x x x x x x x x x o o o o o o";
write = "1 0 1 0 1 1 0 0 1 1 1 x x x x x",
"x x x x x x x x 1 1 i i i i i i";
min_write_delay = 9000;
max_write_delay = 9000;
;
memory "calibration"
size = 1;
read = "0 0 1 1 1 0 0 0 x x x x x x x x",
"0 0 0 0 0 0 0 0 o o o o o o o o";
;
memory "signature"
size = 3;
read = "0 0 1 1 0 0 0 0 x x x x x x x x",
"x x x x x x a1 a0 o o o o o o o o";
;
;
#------------------------------------------------------------
# ATmega1281
#------------------------------------------------------------
# Identical to ATmega1280
part parent "m1280"
id = "m1281";
desc = "ATmega1281";
signature = 0x1e 0x97 0x04;
ocdrev = 3;
;
#------------------------------------------------------------
# ATmega2560
#------------------------------------------------------------
part
id = "m2560";
desc = "ATmega2560";
signature = 0x1e 0x98 0x01;
has_jtag = yes;
stk500_devcode = 0xB2;
# avr910_devcode = 0x43;
chip_erase_delay = 9000;
pagel = 0xD7;
bs2 = 0xA0;
reset = dedicated;
pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1",
"x x x x x x x x x x x x x x x x";
chip_erase = "1 0 1 0 1 1 0 0 1 0 0 0 0 0 0 0",
"x x x x x x x x x x x x x x x x";
timeout = 200;
stabdelay = 100;
cmdexedelay = 25;
synchloops = 32;
bytedelay = 0;
pollindex = 3;
pollvalue = 0x53;
predelay = 1;
postdelay = 1;
pollmethod = 1;
pp_controlstack =
0x0E, 0x1E, 0x0F, 0x1F, 0x2E, 0x3E, 0x2F, 0x3F,
0x4E, 0x5E, 0x4F, 0x5F, 0x6E, 0x7E, 0x6F, 0x7F,
0x66, 0x76, 0x67, 0x77, 0x6A, 0x7A, 0x6B, 0x7B,
0xBE, 0xFD, 0x00, 0x01, 0x00, 0x00, 0x00, 0x02;
hventerstabdelay = 100;
progmodedelay = 0;
latchcycles = 5;
togglevtg = 1;
poweroffdelay = 15;
resetdelayms = 1;
resetdelayus = 0;
hvleavestabdelay = 15;
chiperasepulsewidth = 0;
chiperasepolltimeout = 10;
programfusepulsewidth = 0;
programfusepolltimeout = 5;
programlockpulsewidth = 0;
programlockpolltimeout = 5;
idr = 0x31;
spmcr = 0x57;
rampz = 0x3b;
allowfullpagebitstream = no;
ocdrev = 4;
memory "eeprom"
paged = no; /* leave this "no" */
page_size = 8; /* for parallel programming */
size = 4096;
min_write_delay = 9000;
max_write_delay = 9000;
readback_p1 = 0x00;
readback_p2 = 0x00;
read = " 1 0 1 0 0 0 0 0",
" x x x x a11 a10 a9 a8",
" a7 a6 a5 a4 a3 a2 a1 a0",
" o o o o o o o o";
write = " 1 1 0 0 0 0 0 0",
" x x x x a11 a10 a9 a8",
" a7 a6 a5 a4 a3 a2 a1 a0",
" i i i i i i i i";
loadpage_lo = " 1 1 0 0 0 0 0 1",
" 0 0 0 0 0 0 0 0",
" 0 0 0 0 0 a2 a1 a0",
" i i i i i i i i";
writepage = " 1 1 0 0 0 0 1 0",
" 0 0 x x a11 a10 a9 a8",
" a7 a6 a5 a4 a3 0 0 0",
" x x x x x x x x";
mode = 0x41;
delay = 10;
blocksize = 8;
readsize = 256;
;
memory "flash"
paged = yes;
size = 262144;
page_size = 256;
num_pages = 1024;
min_write_delay = 4500;
max_write_delay = 4500;
readback_p1 = 0x00;
readback_p2 = 0x00;
read_lo = " 0 0 1 0 0 0 0 0",
"a15 a14 a13 a12 a11 a10 a9 a8",
" a7 a6 a5 a4 a3 a2 a1 a0",
" o o o o o o o o";
read_hi = " 0 0 1 0 1 0 0 0",
"a15 a14 a13 a12 a11 a10 a9 a8",
" a7 a6 a5 a4 a3 a2 a1 a0",
" o o o o o o o o";
loadpage_lo = " 0 1 0 0 0 0 0 0",
" x x x x x x x x",
" x a6 a5 a4 a3 a2 a1 a0",
" i i i i i i i i";
loadpage_hi = " 0 1 0 0 1 0 0 0",
" x x x x x x x x",
" x a6 a5 a4 a3 a2 a1 a0",
" i i i i i i i i";
writepage = " 0 1 0 0 1 1 0 0",
"a15 a14 a13 a12 a11 a10 a9 a8",
" a7 x x x x x x x",
" x x x x x x x x";
load_ext_addr = " 0 1 0 0 1 1 0 1",
" 0 0 0 0 0 0 0 0",
" 0 0 0 0 0 0 0 a16",
" 0 0 0 0 0 0 0 0";
mode = 0x41;
delay = 10;
blocksize = 256;
readsize = 256;
;
memory "lfuse"
size = 1;
write = "1 0 1 0 1 1 0 0 1 0 1 0 0 0 0 0",
"x x x x x x x x i i i i i i i i";
read = "0 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0",
"x x x x x x x x o o o o o o o o";
min_write_delay = 9000;
max_write_delay = 9000;
;
memory "hfuse"
size = 1;
write = "1 0 1 0 1 1 0 0 1 0 1 0 1 0 0 0",
"x x x x x x x x i i i i i i i i";
read = "0 1 0 1 1 0 0 0 0 0 0 0 1 0 0 0",
"x x x x x x x x o o o o o o o o";
min_write_delay = 9000;
max_write_delay = 9000;
;
memory "efuse"
size = 1;
write = "1 0 1 0 1 1 0 0 1 0 1 0 0 1 0 0",
"x x x x x x x x x x x x x i i i";
read = "0 1 0 1 0 0 0 0 0 0 0 0 1 0 0 0",
"x x x x x x x x o o o o o o o o";
min_write_delay = 9000;
max_write_delay = 9000;
;
memory "lock"
size = 1;
read = "0 1 0 1 1 0 0 0 0 0 0 0 0 0 0 0",
"x x x x x x x x x x o o o o o o";
write = "1 0 1 0 1 1 0 0 1 1 1 x x x x x",
"x x x x x x x x 1 1 i i i i i i";
min_write_delay = 9000;
max_write_delay = 9000;
;
memory "calibration"
size = 1;
read = "0 0 1 1 1 0 0 0 x x x x x x x x",
"0 0 0 0 0 0 0 0 o o o o o o o o";
;
memory "signature"
size = 3;
read = "0 0 1 1 0 0 0 0 x x x x x x x x",
"x x x x x x a1 a0 o o o o o o o o";
;
;
#------------------------------------------------------------
# ATmega2561
#------------------------------------------------------------
part parent "m2560"
id = "m2561";
desc = "ATmega2561";
signature = 0x1e 0x98 0x02;
ocdrev = 4;
;
#------------------------------------------------------------
# ATmega128RFA1
#------------------------------------------------------------
# Identical to ATmega2561 but half the ROM
part parent "m2561"
id = "m128rfa1";
desc = "ATmega128RFA1";
signature = 0x1e 0xa7 0x01;
chip_erase_delay = 55000;
bs2 = 0xE2;
ocdrev = 3;
memory "flash"
paged = yes;
size = 131072;
page_size = 256;
num_pages = 512;
min_write_delay = 50000;
max_write_delay = 50000;
readback_p1 = 0x00;
readback_p2 = 0x00;
read_lo = " 0 0 1 0 0 0 0 0",
"a15 a14 a13 a12 a11 a10 a9 a8",
" a7 a6 a5 a4 a3 a2 a1 a0",
" o o o o o o o o";
read_hi = " 0 0 1 0 1 0 0 0",
"a15 a14 a13 a12 a11 a10 a9 a8",
" a7 a6 a5 a4 a3 a2 a1 a0",
" o o o o o o o o";
loadpage_lo = " 0 1 0 0 0 0 0 0",
" x x x x x x x x",
" x a6 a5 a4 a3 a2 a1 a0",
" i i i i i i i i";
loadpage_hi = " 0 1 0 0 1 0 0 0",
" x x x x x x x x",
" x a6 a5 a4 a3 a2 a1 a0",
" i i i i i i i i";
writepage = " 0 1 0 0 1 1 0 0",
"a15 a14 a13 a12 a11 a10 a9 a8",
" a7 x x x x x x x",
" x x x x x x x x";
mode = 0x41;
delay = 20;
blocksize = 256;
readsize = 256;
;
;
#------------------------------------------------------------
# ATmega256RFR2
#------------------------------------------------------------
part parent "m2561"
id = "m256rfr2";
desc = "ATmega256RFR2";
signature = 0x1e 0xa8 0x02;
chip_erase_delay = 18500;
bs2 = 0xE2;
memory "eeprom"
paged = no; /* leave this "no" */
page_size = 8; /* for parallel programming */
size = 8192;
min_write_delay = 13000;
max_write_delay = 13000;
readback_p1 = 0x00;
readback_p2 = 0x00;
read = " 1 0 1 0 0 0 0 0",
" x x x a12 a11 a10 a9 a8",
" a7 a6 a5 a4 a3 a2 a1 a0",
" o o o o o o o o";
write = " 1 1 0 0 0 0 0 0",
" x x x a12 a11 a10 a9 a8",
" a7 a6 a5 a4 a3 a2 a1 a0",
" i i i i i i i i";
loadpage_lo = " 1 1 0 0 0 0 0 1",
" 0 0 0 0 0 0 0 0",
" 0 0 0 0 0 a2 a1 a0",
" i i i i i i i i";
writepage = " 1 1 0 0 0 0 1 0",
" 0 0 x a12 a11 a10 a9 a8",
" a7 a6 a5 a4 a3 0 0 0",
" x x x x x x x x";
mode = 0x41;
delay = 10;
blocksize = 8;
readsize = 256;
;
ocdrev = 4;
;
#------------------------------------------------------------
# ATmega128RFR2
#------------------------------------------------------------
part parent "m128rfa1"
id = "m128rfr2";
desc = "ATmega128RFR2";
signature = 0x1e 0xa7 0x02;
ocdrev = 3;
;
#------------------------------------------------------------
# ATmega64RFR2
#------------------------------------------------------------
part parent "m128rfa1"
id = "m64rfr2";
desc = "ATmega64RFR2";
signature = 0x1e 0xa6 0x02;
ocdrev = 3;
memory "flash"
paged = yes;
size = 65536;
page_size = 256;
num_pages = 256;
min_write_delay = 50000;
max_write_delay = 50000;
readback_p1 = 0x00;
readback_p2 = 0x00;
read_lo = " 0 0 1 0 0 0 0 0",
" 0 a14 a13 a12 a11 a10 a9 a8",
" a7 a6 a5 a4 a3 a2 a1 a0",
" o o o o o o o o";
read_hi = " 0 0 1 0 1 0 0 0",
" 0 a14 a13 a12 a11 a10 a9 a8",
" a7 a6 a5 a4 a3 a2 a1 a0",
" o o o o o o o o";
loadpage_lo = " 0 1 0 0 0 0 0 0",
" x x x x x x x x",
" x a6 a5 a4 a3 a2 a1 a0",
" i i i i i i i i";
loadpage_hi = " 0 1 0 0 1 0 0 0",
" x x x x x x x x",
" x a6 a5 a4 a3 a2 a1 a0",
" i i i i i i i i";
writepage = " 0 1 0 0 1 1 0 0",
" 0 a14 a13 a12 a11 a10 a9 a8",
" a7 x x x x x x x",
" x x x x x x x x";
mode = 0x41;
delay = 20;
blocksize = 256;
readsize = 256;
;
memory "eeprom"
paged = no; /* leave this "no" */
page_size = 8; /* for parallel programming */
size = 2048;
min_write_delay = 13000;
max_write_delay = 13000;
readback_p1 = 0x00;
readback_p2 = 0x00;
read = " 1 0 1 0 0 0 0 0",
" x x x x x a10 a9 a8",
" a7 a6 a5 a4 a3 a2 a1 a0",
" o o o o o o o o";
write = " 1 1 0 0 0 0 0 0",
" x x x x x a10 a9 a8",
" a7 a6 a5 a4 a3 a2 a1 a0",
" i i i i i i i i";
loadpage_lo = " 1 1 0 0 0 0 0 1",
" 0 0 0 0 0 0 0 0",
" 0 0 0 0 0 a2 a1 a0",
" i i i i i i i i";
writepage = " 1 1 0 0 0 0 1 0",
" 0 0 x x x a10 a9 a8",
" a7 a6 a5 a4 a3 0 0 0",
" x x x x x x x x";
mode = 0x41;
delay = 10;
blocksize = 8;
readsize = 256;
;
;
#------------------------------------------------------------
# ATmega2564RFR2
#------------------------------------------------------------
part parent "m256rfr2"
id = "m2564rfr2";
desc = "ATmega2564RFR2";
signature = 0x1e 0xa8 0x03;
;
#------------------------------------------------------------
# ATmega1284RFR2
#------------------------------------------------------------
part parent "m128rfr2"
id = "m1284rfr2";
desc = "ATmega1284RFR2";
signature = 0x1e 0xa7 0x03;
;
#------------------------------------------------------------
# ATmega644RFR2
#------------------------------------------------------------
part parent "m64rfr2"
id = "m644rfr2";
desc = "ATmega644RFR2";
signature = 0x1e 0xa6 0x03;
;
#------------------------------------------------------------
# ATtiny24
#------------------------------------------------------------
part
id = "t24";
desc = "ATtiny24";
has_debugwire = yes;
flash_instr = 0xB4, 0x07, 0x17;
eeprom_instr = 0xBB, 0xFF, 0xBB, 0xEE, 0xBB, 0xCC, 0xB2, 0x0D,
0xBC, 0x07, 0xB4, 0x07, 0xBA, 0x0D, 0xBB, 0xBC,
0x99, 0xE1, 0xBB, 0xAC;
## no STK500 devcode in XML file, use the ATtiny45 one
stk500_devcode = 0x14;
## avr910_devcode = ?;
## Try the AT90S2313 devcode:
avr910_devcode = 0x20;
signature = 0x1e 0x91 0x0b;
reset = io;
chip_erase_delay = 4500;
pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1",
"x x x x x x x x x x x x x x x x";
chip_erase = "1 0 1 0 1 1 0 0 1 0 0 x x x x x",
"x x x x x x x x x x x x x x x x";
timeout = 200;
stabdelay = 100;
cmdexedelay = 25;
synchloops = 32;
bytedelay = 0;
pollindex = 3;
pollvalue = 0x53;
predelay = 1;
postdelay = 1;
pollmethod = 1;
hvsp_controlstack =
0x4C, 0x0C, 0x1C, 0x2C, 0x3C, 0x64, 0x74, 0x66,
0x68, 0x78, 0x68, 0x68, 0x7A, 0x6A, 0x68, 0x78,
0x78, 0x7D, 0x6D, 0x0C, 0x80, 0x40, 0x20, 0x10,
0x11, 0x08, 0x04, 0x02, 0x03, 0x08, 0x04, 0x0F;
hventerstabdelay = 100;
hvspcmdexedelay = 0;
synchcycles = 6;
latchcycles = 1;
togglevtg = 1;
poweroffdelay = 25;
resetdelayms = 0;
resetdelayus = 70;
hvleavestabdelay = 100;
resetdelay = 25;
chiperasepolltimeout = 40;
chiperasetime = 0;
programfusepolltimeout = 25;
programlockpolltimeout = 25;
ocdrev = 1;
memory "eeprom"
size = 128;
paged = no;
page_size = 4;
min_write_delay = 4000;
max_write_delay = 4500;
readback_p1 = 0xff;
readback_p2 = 0xff;
read = "1 0 1 0 0 0 0 0 0 0 0 x x x x x",
"x a6 a5 a4 a3 a2 a1 a0 o o o o o o o o";
write = "1 1 0 0 0 0 0 0 0 0 0 x x x x x",
"x a6 a5 a4 a3 a2 a1 a0 i i i i i i i i";
loadpage_lo = " 1 1 0 0 0 0 0 1",
" 0 0 0 0 0 0 0 0",
" 0 0 0 0 0 0 a1 a0",
" i i i i i i i i";
writepage = " 1 1 0 0 0 0 1 0",
" 0 0 x x x x x x",
" x a6 a5 a4 a3 a2 0 0",
" x x x x x x x x";
mode = 0x41;
delay = 6;
blocksize = 4;
readsize = 256;
;
memory "flash"
paged = yes;
size = 2048;
page_size = 32;
num_pages = 64;
min_write_delay = 4500;
max_write_delay = 4500;
readback_p1 = 0xff;
readback_p2 = 0xff;
read_lo = " 0 0 1 0 0 0 0 0",
" 0 0 0 0 0 0 a9 a8",
" a7 a6 a5 a4 a3 a2 a1 a0",
" o o o o o o o o";
read_hi = " 0 0 1 0 1 0 0 0",
" 0 0 0 0 0 0 a9 a8",
" a7 a6 a5 a4 a3 a2 a1 a0",
" o o o o o o o o";
loadpage_lo = " 0 1 0 0 0 0 0 0",
" 0 0 0 x x x x x",
" x x x x a3 a2 a1 a0",
" i i i i i i i i";
loadpage_hi = " 0 1 0 0 1 0 0 0",
" 0 0 0 x x x x x",
" x x x x a3 a2 a1 a0",
" i i i i i i i i";
writepage = " 0 1 0 0 1 1 0 0",
" 0 0 0 0 0 0 a9 a8",
" a7 a6 a5 a4 x x x x",
" x x x x x x x x";
mode = 0x41;
delay = 6;
blocksize = 32;
readsize = 256;
;
# ATtiny24 has Signature Bytes: 0x1E 0x91 0x0B.
memory "signature"
size = 3;
read = "0 0 1 1 0 0 0 0 0 0 0 x x x x x",
"x x x x x x a1 a0 o o o o o o o o";
;
memory "lock"
size = 1;
write = "1 0 1 0 1 1 0 0 1 1 1 x x x x x",
"x x x x x x x x x x x x x x i i";
read = "0 1 0 1 1 0 0 0 0 0 0 0 0 0 0 0",
"0 0 0 0 0 0 0 0 o o o o o o o o";
min_write_delay = 9000;
max_write_delay = 9000;
;
memory "lfuse"
size = 1;
write = "1 0 1 0 1 1 0 0 1 0 1 0 0 0 0 0",
"x x x x x x x x i i i i i i i i";
read = "0 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0",
"x x x x x x x x o o o o o o o o";
min_write_delay = 9000;
max_write_delay = 9000;
;
memory "hfuse"
size = 1;
write = "1 0 1 0 1 1 0 0 1 0 1 0 1 0 0 0",
"x x x x x x x x i i i i i i i i";
read = "0 1 0 1 1 0 0 0 0 0 0 0 1 0 0 0",
"x x x x x x x x o o o o o o o o";
min_write_delay = 9000;
max_write_delay = 9000;
;
memory "efuse"
size = 1;
write = "1 0 1 0 1 1 0 0 1 0 1 0 0 1 0 0",
"x x x x x x x x x x x x x x x i";
read = "0 1 0 1 0 0 0 0 0 0 0 0 1 0 0 0",
"x x x x x x x x o o o o o o o o";
min_write_delay = 9000;
max_write_delay = 9000;
;
memory "calibration"
size = 1;
read = "0 0 1 1 1 0 0 0 0 0 0 x x x x x",
"0 0 0 0 0 0 0 a0 o o o o o o o o";
;
;
#------------------------------------------------------------
# ATtiny44
#------------------------------------------------------------
part
id = "t44";
desc = "ATtiny44";
has_debugwire = yes;
flash_instr = 0xB4, 0x07, 0x17;
eeprom_instr = 0xBB, 0xFF, 0xBB, 0xEE, 0xBB, 0xCC, 0xB2, 0x0D,
0xBC, 0x07, 0xB4, 0x07, 0xBA, 0x0D, 0xBB, 0xBC,
0x99, 0xE1, 0xBB, 0xAC;
## no STK500 devcode in XML file, use the ATtiny45 one
stk500_devcode = 0x14;
## avr910_devcode = ?;
## Try the AT90S2313 devcode:
avr910_devcode = 0x20;
signature = 0x1e 0x92 0x07;
reset = io;
chip_erase_delay = 4500;
pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1",
"x x x x x x x x x x x x x x x x";
chip_erase = "1 0 1 0 1 1 0 0 1 0 0 x x x x x",
"x x x x x x x x x x x x x x x x";
timeout = 200;
stabdelay = 100;
cmdexedelay = 25;
synchloops = 32;
bytedelay = 0;
pollindex = 3;
pollvalue = 0x53;
predelay = 1;
postdelay = 1;
pollmethod = 1;
hvsp_controlstack =
0x4C, 0x0C, 0x1C, 0x2C, 0x3C, 0x64, 0x74, 0x66,
0x68, 0x78, 0x68, 0x68, 0x7A, 0x6A, 0x68, 0x78,
0x78, 0x7D, 0x6D, 0x0C, 0x80, 0x40, 0x20, 0x10,
0x11, 0x08, 0x04, 0x02, 0x03, 0x08, 0x04, 0x0F;
hventerstabdelay = 100;
hvspcmdexedelay = 0;
synchcycles = 6;
latchcycles = 1;
togglevtg = 1;
poweroffdelay = 25;
resetdelayms = 0;
resetdelayus = 70;
hvleavestabdelay = 100;
resetdelay = 25;
chiperasepolltimeout = 40;
chiperasetime = 0;
programfusepolltimeout = 25;
programlockpolltimeout = 25;
ocdrev = 1;
memory "eeprom"
size = 256;
paged = no;
page_size = 4;
min_write_delay = 4000;
max_write_delay = 4500;
readback_p1 = 0xff;
readback_p2 = 0xff;
read = "1 0 1 0 0 0 0 0 0 0 0 x x x x x",
"a7 a6 a5 a4 a3 a2 a1 a0 o o o o o o o o";
write = "1 1 0 0 0 0 0 0 0 0 0 x x x x x",
"a7 a6 a5 a4 a3 a2 a1 a0 i i i i i i i i";
loadpage_lo = " 1 1 0 0 0 0 0 1",
" 0 0 0 0 0 0 0 0",
" 0 0 0 0 0 0 a1 a0",
" i i i i i i i i";
writepage = " 1 1 0 0 0 0 1 0",
" 0 0 x x x x x x",
" x a6 a5 a4 a3 a2 0 0",
" x x x x x x x x";
mode = 0x41;
delay = 6;
blocksize = 4;
readsize = 256;
;
memory "flash"
paged = yes;
size = 4096;
page_size = 64;
num_pages = 64;
min_write_delay = 4500;
max_write_delay = 4500;
readback_p1 = 0xff;
readback_p2 = 0xff;
read_lo = " 0 0 1 0 0 0 0 0",
" 0 0 0 0 0 a10 a9 a8",
" a7 a6 a5 a4 a3 a2 a1 a0",
" o o o o o o o o";
read_hi = " 0 0 1 0 1 0 0 0",
" 0 0 0 0 0 a10 a9 a8",
" a7 a6 a5 a4 a3 a2 a1 a0",
" o o o o o o o o";
loadpage_lo = " 0 1 0 0 0 0 0 0",
" 0 0 0 x x x x x",
" x x x a4 a3 a2 a1 a0",
" i i i i i i i i";
loadpage_hi = " 0 1 0 0 1 0 0 0",
" 0 0 0 x x x x x",
" x x x a4 a3 a2 a1 a0",
" i i i i i i i i";
writepage = " 0 1 0 0 1 1 0 0",
" 0 0 0 0 0 a10 a9 a8",
" a7 a6 a5 x x x x x",
" x x x x x x x x";
mode = 0x41;
delay = 6;
blocksize = 32;
readsize = 256;
;
# ATtiny44 has Signature Bytes: 0x1E 0x92 0x07.
memory "signature"
size = 3;
read = "0 0 1 1 0 0 0 0 0 0 0 x x x x x",
"x x x x x x a1 a0 o o o o o o o o";
;
memory "lock"
size = 1;
write = "1 0 1 0 1 1 0 0 1 1 1 x x x x x",
"x x x x x x x x x x x x x x i i";
read = "0 1 0 1 1 0 0 0 0 0 0 0 0 0 0 0",
"0 0 0 0 0 0 0 0 o o o o o o o o";
min_write_delay = 9000;
max_write_delay = 9000;
;
memory "lfuse"
size = 1;
write = "1 0 1 0 1 1 0 0 1 0 1 0 0 0 0 0",
"x x x x x x x x i i i i i i i i";
read = "0 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0",
"x x x x x x x x o o o o o o o o";
min_write_delay = 9000;
max_write_delay = 9000;
;
memory "hfuse"
size = 1;
write = "1 0 1 0 1 1 0 0 1 0 1 0 1 0 0 0",
"x x x x x x x x i i i i i i i i";
read = "0 1 0 1 1 0 0 0 0 0 0 0 1 0 0 0",
"x x x x x x x x o o o o o o o o";
min_write_delay = 9000;
max_write_delay = 9000;
;
memory "efuse"
size = 1;
write = "1 0 1 0 1 1 0 0 1 0 1 0 0 1 0 0",
"x x x x x x x x x x x x x x x i";
read = "0 1 0 1 0 0 0 0 0 0 0 0 1 0 0 0",
"x x x x x x x x o o o o o o o o";
min_write_delay = 9000;
max_write_delay = 9000;
;
memory "calibration"
size = 1;
read = "0 0 1 1 1 0 0 0 0 0 0 x x x x x",
"0 0 0 0 0 0 0 a0 o o o o o o o o";
;
;
#------------------------------------------------------------
# ATtiny84
#------------------------------------------------------------
part
id = "t84";
desc = "ATtiny84";
has_debugwire = yes;
flash_instr = 0xB4, 0x07, 0x17;
eeprom_instr = 0xBB, 0xFF, 0xBB, 0xEE, 0xBB, 0xCC, 0xB2, 0x0D,
0xBC, 0x07, 0xB4, 0x07, 0xBA, 0x0D, 0xBB, 0xBC,
0x99, 0xE1, 0xBB, 0xAC;
## no STK500 devcode in XML file, use the ATtiny45 one
stk500_devcode = 0x14;
## avr910_devcode = ?;
## Try the AT90S2313 devcode:
avr910_devcode = 0x20;
signature = 0x1e 0x93 0x0c;
reset = io;
chip_erase_delay = 4500;
pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1",
"x x x x x x x x x x x x x x x x";
chip_erase = "1 0 1 0 1 1 0 0 1 0 0 x x x x x",
"x x x x x x x x x x x x x x x x";
timeout = 200;
stabdelay = 100;
cmdexedelay = 25;
synchloops = 32;
bytedelay = 0;
pollindex = 3;
pollvalue = 0x53;
predelay = 1;
postdelay = 1;
pollmethod = 1;
hvsp_controlstack =
0x4C, 0x0C, 0x1C, 0x2C, 0x3C, 0x64, 0x74, 0x66,
0x68, 0x78, 0x68, 0x68, 0x7A, 0x6A, 0x68, 0x78,
0x78, 0x7D, 0x6D, 0x0C, 0x80, 0x40, 0x20, 0x10,
0x11, 0x08, 0x04, 0x02, 0x03, 0x08, 0x04, 0x0F;
hventerstabdelay = 100;
hvspcmdexedelay = 0;
synchcycles = 6;
latchcycles = 1;
togglevtg = 1;
poweroffdelay = 25;
resetdelayms = 0;
resetdelayus = 70;
hvleavestabdelay = 100;
resetdelay = 25;
chiperasepolltimeout = 40;
chiperasetime = 0;
programfusepolltimeout = 25;
programlockpolltimeout = 25;
ocdrev = 1;
memory "eeprom"
size = 512;
paged = no;
page_size = 4;
min_write_delay = 4000;
max_write_delay = 4500;
readback_p1 = 0xff;
readback_p2 = 0xff;
read = "1 0 1 0 0 0 0 0 0 0 0 x x x x a8",
"a7 a6 a5 a4 a3 a2 a1 a0 o o o o o o o o";
write = "1 1 0 0 0 0 0 0 0 0 0 x x x x a8",
"a7 a6 a5 a4 a3 a2 a1 a0 i i i i i i i i";
loadpage_lo = " 1 1 0 0 0 0 0 1",
" 0 0 0 0 0 0 0 0",
" 0 0 0 0 0 0 a1 a0",
" i i i i i i i i";
writepage = " 1 1 0 0 0 0 1 0",
" 0 0 x x x x x x",
" x a6 a5 a4 a3 a2 0 0",
" x x x x x x x x";
mode = 0x41;
delay = 6;
blocksize = 4;
readsize = 256;
;
memory "flash"
paged = yes;
size = 8192;
page_size = 64;
num_pages = 128;
min_write_delay = 4500;
max_write_delay = 4500;
readback_p1 = 0xff;
readback_p2 = 0xff;
read_lo = " 0 0 1 0 0 0 0 0",
" 0 0 0 0 a11 a10 a9 a8",
" a7 a6 a5 a4 a3 a2 a1 a0",
" o o o o o o o o";
read_hi = " 0 0 1 0 1 0 0 0",
" 0 0 0 0 a11 a10 a9 a8",
" a7 a6 a5 a4 a3 a2 a1 a0",
" o o o o o o o o";
loadpage_lo = " 0 1 0 0 0 0 0 0",
" 0 0 0 x x x x x",
" x x x a4 a3 a2 a1 a0",
" i i i i i i i i";
loadpage_hi = " 0 1 0 0 1 0 0 0",
" 0 0 0 x x x x x",
" x x x a4 a3 a2 a1 a0",
" i i i i i i i i";
writepage = " 0 1 0 0 1 1 0 0",
" 0 0 0 0 a11 a10 a9 a8",
" a7 a6 a5 x x x x x",
" x x x x x x x x";
mode = 0x41;
delay = 6;
blocksize = 32;
readsize = 256;
;
# ATtiny84 has Signature Bytes: 0x1E 0x93 0x0C.
memory "signature"
size = 3;
read = "0 0 1 1 0 0 0 0 0 0 0 x x x x x",
"x x x x x x a1 a0 o o o o o o o o";
;
memory "lock"
size = 1;
write = "1 0 1 0 1 1 0 0 1 1 1 x x x x x",
"x x x x x x x x x x x x x x i i";
read = "0 1 0 1 1 0 0 0 0 0 0 0 0 0 0 0",
"0 0 0 0 0 0 0 0 o o o o o o o o";
min_write_delay = 9000;
max_write_delay = 9000;
;
memory "lfuse"
size = 1;
write = "1 0 1 0 1 1 0 0 1 0 1 0 0 0 0 0",
"x x x x x x x x i i i i i i i i";
read = "0 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0",
"x x x x x x x x o o o o o o o o";
min_write_delay = 9000;
max_write_delay = 9000;
;
memory "hfuse"
size = 1;
write = "1 0 1 0 1 1 0 0 1 0 1 0 1 0 0 0",
"x x x x x x x x i i i i i i i i";
read = "0 1 0 1 1 0 0 0 0 0 0 0 1 0 0 0",
"x x x x x x x x o o o o o o o o";
min_write_delay = 9000;
max_write_delay = 9000;
;
memory "efuse"
size = 1;
write = "1 0 1 0 1 1 0 0 1 0 1 0 0 1 0 0",
"x x x x x x x x x x x x x x x i";
read = "0 1 0 1 0 0 0 0 0 0 0 0 1 0 0 0",
"x x x x x x x x o o o o o o o o";
min_write_delay = 9000;
max_write_delay = 9000;
;
memory "calibration"
size = 1;
read = "0 0 1 1 1 0 0 0 0 0 0 x x x x x",
"0 0 0 0 0 0 0 a0 o o o o o o o o";
;
;
#------------------------------------------------------------
# ATtiny43U
#------------------------------------------------------------
part
id = "t43u";
desc = "ATtiny43u";
has_debugwire = yes;
flash_instr = 0xB4, 0x07, 0x17;
eeprom_instr = 0xBB, 0xFF, 0xBB, 0xEE, 0xBB, 0xCC, 0xB2, 0x0D,
0xBC, 0x07, 0xB4, 0x07, 0xBA, 0x0D, 0xBB, 0xBC,
0x99, 0xE1, 0xBB, 0xAC;
stk500_devcode = 0x14;
## avr910_devcode = ?;
## Try the AT90S2313 devcode:
avr910_devcode = 0x20;
signature = 0x1e 0x92 0x0C;
reset = io;
chip_erase_delay = 1000;
pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1",
"x x x x x x x x x x x x x x x x";
chip_erase = "1 0 1 0 1 1 0 0 1 0 0 x x x x x",
"x x x x x x x x x x x x x x x x";
timeout = 200;
stabdelay = 100;
cmdexedelay = 25;
synchloops = 32;
bytedelay = 0;
pollindex = 3;
pollvalue = 0x53;
predelay = 1;
postdelay = 1;
pollmethod = 1;
pp_controlstack = 0x0E, 0x1E, 0x0E, 0x1E, 0x2E, 0x3E, 0x2E, 0x3E, 0x4E, 0x5E,
0x4E, 0x5E, 0x6E, 0x7E, 0x6E, 0x7E, 0x06, 0x16, 0x46, 0x56,
0x0A, 0x1A, 0x4A, 0x5A, 0x1E, 0x7C, 0x00, 0x01, 0x00, 0x00,
0x00, 0x00;
hventerstabdelay = 100;
progmodedelay = 0;
hvspcmdexedelay = 0;
latchcycles = 5;
togglevtg = 1;
poweroffdelay = 20;
resetdelayms = 1;
resetdelayus = 0;
hvleavestabdelay = 15;
resetdelay = 15;
chiperasepulsewidth = 0;
chiperasepolltimeout = 10;
programfusepulsewidth = 0;
programfusepolltimeout = 5;
programlockpulsewidth = 0;
programlockpolltimeout = 5;
memory "eeprom"
size = 64;
paged = yes;
page_size = 4;
num_pages = 16;
min_write_delay = 4000;
max_write_delay = 4500;
readback_p1 = 0xff;
readback_p2 = 0xff;
read = "1 0 1 0 0 0 0 0 0 0 0 x x x x x",
"0 0 a4 a3 a2 a1 a0 o o o o o o o o";
write = "1 1 0 0 0 0 0 0 0 0 0 x x x x x",
"0 0 a5 a4 a3 a2 a1 a0 i i i i i i i i";
loadpage_lo = " 1 1 0 0 0 0 0 1",
" 0 0 0 0 0 0 0 0",
" 0 0 0 0 0 0 a1 a0",
" i i i i i i i i";
writepage = " 1 1 0 0 0 0 1 0",
" 0 0 x x x x x x",
" 0 0 a5 a4 a3 a2 0 0",
" x x x x x x x x";
mode = 0x41;
delay = 5;
blocksize = 4;
readsize = 256;
;
memory "flash"
paged = yes;
size = 4096;
page_size = 64;
num_pages = 64;
min_write_delay = 4500;
max_write_delay = 4500;
readback_p1 = 0xff;
readback_p2 = 0xff;
read_lo = " 0 0 1 0 0 0 0 0",
" 0 0 0 0 0 a10 a9 a8",
" a7 a6 a5 a4 a3 a2 a1 a0",
" o o o o o o o o";
read_hi = " 0 0 1 0 1 0 0 0",
" 0 0 0 0 0 a10 a9 a8",
" a7 a6 a5 a4 a3 a2 a1 a0",
" o o o o o o o o";
loadpage_lo = " 0 1 0 0 0 0 0 0",
" 0 0 0 x x x x x",
" x x x a4 a3 a2 a1 a0",
" i i i i i i i i";
loadpage_hi = " 0 1 0 0 1 0 0 0",
" 0 0 0 x x x x x",
" x x x a4 a3 a2 a1 a0",
" i i i i i i i i";
writepage = " 0 1 0 0 1 1 0 0",
" 0 0 0 0 0 a10 a9 a8",
" a7 a6 a5 x x x x x",
" x x x x x x x x";
mode = 0x41;
delay = 10;
blocksize = 64;
readsize = 256;
;
memory "signature"
size = 3;
read = "0 0 1 1 0 0 0 0 0 0 0 x x x x x",
"x x x x x x a1 a0 o o o o o o o o";
;
memory "lock"
size = 1;
write = "1 0 1 0 1 1 0 0 1 1 1 x x x x x",
"x x x x x x x x 1 1 i i i i i i";
min_write_delay = 4500;
max_write_delay = 4500;
;
memory "lfuse"
size = 1;
write = "1 0 1 0 1 1 0 0 1 0 1 0 0 0 0 0",
"x x x x x x x x i i i i i i i i";
read = "0 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0",
"x x x x x x x x o o o o o o o o";
min_write_delay = 4500;
max_write_delay = 4500;
;
memory "hfuse"
size = 1;
write = "1 0 1 0 1 1 0 0 1 0 1 0 1 0 0 0",
"x x x x x x x x i i i i i i i i";
read = "0 1 0 1 1 0 0 0 0 0 0 0 1 0 0 0",
"x x x x x x x x o o o o o o o o";
min_write_delay = 4500;
max_write_delay = 4500;
;
memory "efuse"
size = 1;
write = "1 0 1 0 1 1 0 0 1 0 1 0 0 1 0 0",
"x x x x x x x x x x x x x x x i";
read = "0 1 0 1 0 0 0 0 0 0 0 0 1 0 0 0",
"x x x x x x x x o o o o o o o o";
min_write_delay = 4500;
max_write_delay = 4500;
;
memory "calibration"
size = 2;
read = "0 0 1 1 1 0 0 0 0 0 0 x x x x x",
"0 0 0 0 0 0 0 a0 o o o o o o o o";
;
;
#------------------------------------------------------------
# ATmega32u4
#------------------------------------------------------------
part
id = "m32u4";
desc = "ATmega32U4";
signature = 0x1e 0x95 0x87;
usbpid = 0x2ff4;
has_jtag = yes;
# stk500_devcode = 0xB2;
# avr910_devcode = 0x43;
chip_erase_delay = 9000;
pagel = 0xD7;
bs2 = 0xA0;
reset = dedicated;
pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1",
"x x x x x x x x x x x x x x x x";
chip_erase = "1 0 1 0 1 1 0 0 1 0 0 0 0 0 0 0",
"x x x x x x x x x x x x x x x x";
timeout = 200;
stabdelay = 100;
cmdexedelay = 25;
synchloops = 32;
bytedelay = 0;
pollindex = 3;
pollvalue = 0x53;
predelay = 1;
postdelay = 1;
pollmethod = 1;
pp_controlstack =
0x0E, 0x1E, 0x0F, 0x1F, 0x2E, 0x3E, 0x2F, 0x3F,
0x4E, 0x5E, 0x4F, 0x5F, 0x6E, 0x7E, 0x6F, 0x7F,
0x66, 0x76, 0x67, 0x77, 0x6A, 0x7A, 0x6B, 0x7B,
0xBE, 0xFD, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00;
hventerstabdelay = 100;
progmodedelay = 0;
latchcycles = 5;
togglevtg = 1;
poweroffdelay = 15;
resetdelayms = 1;
resetdelayus = 0;
hvleavestabdelay = 15;
chiperasepulsewidth = 0;
chiperasepolltimeout = 10;
programfusepulsewidth = 0;
programfusepolltimeout = 5;
programlockpulsewidth = 0;
programlockpolltimeout = 5;
idr = 0x31;
spmcr = 0x57;
rampz = 0x3b;
allowfullpagebitstream = no;
ocdrev = 3;
memory "eeprom"
paged = no; /* leave this "no" */
page_size = 4; /* for parallel programming */
size = 1024;
min_write_delay = 9000;
max_write_delay = 9000;
readback_p1 = 0x00;
readback_p2 = 0x00;
read = " 1 0 1 0 0 0 0 0",
" x x x x x a10 a9 a8",
" a7 a6 a5 a4 a3 a2 a1 a0",
" o o o o o o o o";
write = " 1 1 0 0 0 0 0 0",
" x x x x x a10 a9 a8",
" a7 a6 a5 a4 a3 a2 a1 a0",
" i i i i i i i i";
loadpage_lo = " 1 1 0 0 0 0 0 1",
" 0 0 0 0 0 0 0 0",
" 0 0 0 0 0 a2 a1 a0",
" i i i i i i i i";
writepage = " 1 1 0 0 0 0 1 0",
" 0 0 x x x a10 a9 a8",
" a7 a6 a5 a4 a3 0 0 0",
" x x x x x x x x";
mode = 0x41;
delay = 20;
blocksize = 4;
readsize = 256;
;
memory "flash"
paged = yes;
size = 32768;
page_size = 128;
num_pages = 256;
min_write_delay = 4500;
max_write_delay = 4500;
readback_p1 = 0x00;
readback_p2 = 0x00;
read_lo = " 0 0 1 0 0 0 0 0",
" 0 a14 a13 a12 a11 a10 a9 a8",
" a7 a6 a5 a4 a3 a2 a1 a0",
" o o o o o o o o";
read_hi = " 0 0 1 0 1 0 0 0",
" 0 a14 a13 a12 a11 a10 a9 a8",
" a7 a6 a5 a4 a3 a2 a1 a0",
" o o o o o o o o";
loadpage_lo = " 0 1 0 0 0 0 0 0",
" x x x x x x x x",
" x x a5 a4 a3 a2 a1 a0",
" i i i i i i i i";
loadpage_hi = " 0 1 0 0 1 0 0 0",
" x x x x x x x x",
" x x a5 a4 a3 a2 a1 a0",
" i i i i i i i i";
writepage = " 0 1 0 0 1 1 0 0",
" a15 a14 a13 a12 a11 a10 a9 a8",
" a7 a6 x x x x x x",
" x x x x x x x x";
mode = 0x41;
delay = 6;
blocksize = 128;
readsize = 256;
;
memory "lfuse"
size = 1;
write = "1 0 1 0 1 1 0 0 1 0 1 0 0 0 0 0",
"x x x x x x x x i i i i i i i i";
read = "0 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0",
"x x x x x x x x o o o o o o o o";
min_write_delay = 9000;
max_write_delay = 9000;
;
memory "hfuse"
size = 1;
write = "1 0 1 0 1 1 0 0 1 0 1 0 1 0 0 0",
"x x x x x x x x i i i i i i i i";
read = "0 1 0 1 1 0 0 0 0 0 0 0 1 0 0 0",
"x x x x x x x x o o o o o o o o";
min_write_delay = 9000;
max_write_delay = 9000;
;
memory "efuse"
size = 1;
write = "1 0 1 0 1 1 0 0 1 0 1 0 0 1 0 0",
"x x x x x x x x x x x x i i i i";
read = "0 1 0 1 0 0 0 0 0 0 0 0 1 0 0 0",
"x x x x x x x x o o o o o o o o";
min_write_delay = 9000;
max_write_delay = 9000;
;
memory "lock"
size = 1;
read = "0 1 0 1 1 0 0 0 0 0 0 0 0 0 0 0",
"x x x x x x x x x x o o o o o o";
write = "1 0 1 0 1 1 0 0 1 1 1 x x x x x",
"x x x x x x x x 1 1 i i i i i i";
min_write_delay = 9000;
max_write_delay = 9000;
;
memory "calibration"
size = 1;
read = "0 0 1 1 1 0 0 0 x x x x x x x x",
"0 0 0 0 0 0 0 0 o o o o o o o o";
;
memory "signature"
size = 3;
read = "0 0 1 1 0 0 0 0 x x x x x x x x",
"x x x x x x a1 a0 o o o o o o o o";
;
;
#------------------------------------------------------------
# AT90USB646
#------------------------------------------------------------
part
id = "usb646";
desc = "AT90USB646";
signature = 0x1e 0x96 0x82;
usbpid = 0x2ff9;
has_jtag = yes;
# stk500_devcode = 0xB2;
# avr910_devcode = 0x43;
chip_erase_delay = 9000;
pagel = 0xD7;
bs2 = 0xA0;
reset = dedicated;
pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1",
"x x x x x x x x x x x x x x x x";
chip_erase = "1 0 1 0 1 1 0 0 1 0 0 0 0 0 0 0",
"x x x x x x x x x x x x x x x x";
timeout = 200;
stabdelay = 100;
cmdexedelay = 25;
synchloops = 32;
bytedelay = 0;
pollindex = 3;
pollvalue = 0x53;
predelay = 1;
postdelay = 1;
pollmethod = 1;
pp_controlstack =
0x0E, 0x1E, 0x0F, 0x1F, 0x2E, 0x3E, 0x2F, 0x3F,
0x4E, 0x5E, 0x4F, 0x5F, 0x6E, 0x7E, 0x6F, 0x7F,
0x66, 0x76, 0x67, 0x77, 0x6A, 0x7A, 0x6B, 0x7B,
0xBE, 0xFD, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00;
hventerstabdelay = 100;
progmodedelay = 0;
latchcycles = 5;
togglevtg = 1;
poweroffdelay = 15;
resetdelayms = 1;
resetdelayus = 0;
hvleavestabdelay = 15;
chiperasepulsewidth = 0;
chiperasepolltimeout = 10;
programfusepulsewidth = 0;
programfusepolltimeout = 5;
programlockpulsewidth = 0;
programlockpolltimeout = 5;
idr = 0x31;
spmcr = 0x57;
rampz = 0x3b;
allowfullpagebitstream = no;
ocdrev = 3;
memory "eeprom"
paged = no; /* leave this "no" */
page_size = 8; /* for parallel programming */
size = 2048;
min_write_delay = 9000;
max_write_delay = 9000;
readback_p1 = 0x00;
readback_p2 = 0x00;
read = " 1 0 1 0 0 0 0 0",
" x x x x x a10 a9 a8",
" a7 a6 a5 a4 a3 a2 a1 a0",
" o o o o o o o o";
write = " 1 1 0 0 0 0 0 0",
" x x x x x a10 a9 a8",
" a7 a6 a5 a4 a3 a2 a1 a0",
" i i i i i i i i";
loadpage_lo = " 1 1 0 0 0 0 0 1",
" 0 0 0 0 0 0 0 0",
" 0 0 0 0 0 a2 a1 a0",
" i i i i i i i i";
writepage = " 1 1 0 0 0 0 1 0",
" 0 0 x x x a10 a9 a8",
" a7 a6 a5 a4 a3 0 0 0",
" x x x x x x x x";
mode = 0x41;
delay = 10;
blocksize = 8;
readsize = 256;
;
memory "flash"
paged = yes;
size = 65536;
page_size = 256;
num_pages = 256;
min_write_delay = 4500;
max_write_delay = 4500;
readback_p1 = 0x00;
readback_p2 = 0x00;
read_lo = " 0 0 1 0 0 0 0 0",
" 0 a14 a13 a12 a11 a10 a9 a8",
" a7 a6 a5 a4 a3 a2 a1 a0",
" o o o o o o o o";
read_hi = " 0 0 1 0 1 0 0 0",
" 0 a14 a13 a12 a11 a10 a9 a8",
" a7 a6 a5 a4 a3 a2 a1 a0",
" o o o o o o o o";
loadpage_lo = " 0 1 0 0 0 0 0 0",
" x x x x x x x x",
" x a6 a5 a4 a3 a2 a1 a0",
" i i i i i i i i";
loadpage_hi = " 0 1 0 0 1 0 0 0",
" x x x x x x x x",
" x a6 a5 a4 a3 a2 a1 a0",
" i i i i i i i i";
writepage = " 0 1 0 0 1 1 0 0",
" 0 a14 a13 a12 a11 a10 a9 a8",
" a7 x x x x x x x",
" x x x x x x x x";
mode = 0x41;
delay = 6;
blocksize = 256;
readsize = 256;
;
memory "lfuse"
size = 1;
write = "1 0 1 0 1 1 0 0 1 0 1 0 0 0 0 0",
"x x x x x x x x i i i i i i i i";
read = "0 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0",
"x x x x x x x x o o o o o o o o";
min_write_delay = 9000;
max_write_delay = 9000;
;
memory "hfuse"
size = 1;
write = "1 0 1 0 1 1 0 0 1 0 1 0 1 0 0 0",
"x x x x x x x x i i i i i i i i";
read = "0 1 0 1 1 0 0 0 0 0 0 0 1 0 0 0",
"x x x x x x x x o o o o o o o o";
min_write_delay = 9000;
max_write_delay = 9000;
;
memory "efuse"
size = 1;
write = "1 0 1 0 1 1 0 0 1 0 1 0 0 1 0 0",
"x x x x x x x x x x x x i i i i";
read = "0 1 0 1 0 0 0 0 0 0 0 0 1 0 0 0",
"x x x x x x x x o o o o o o o o";
min_write_delay = 9000;
max_write_delay = 9000;
;
memory "lock"
size = 1;
read = "0 1 0 1 1 0 0 0 0 0 0 0 0 0 0 0",
"x x x x x x x x x x o o o o o o";
write = "1 0 1 0 1 1 0 0 1 1 1 x x x x x",
"x x x x x x x x 1 1 i i i i i i";
min_write_delay = 9000;
max_write_delay = 9000;
;
memory "calibration"
size = 1;
read = "0 0 1 1 1 0 0 0 x x x x x x x x",
"0 0 0 0 0 0 0 0 o o o o o o o o";
;
memory "signature"
size = 3;
read = "0 0 1 1 0 0 0 0 x x x x x x x x",
"x x x x x x a1 a0 o o o o o o o o";
;
;
#------------------------------------------------------------
# AT90USB647
#------------------------------------------------------------
# identical to AT90USB646
part parent "usb646"
id = "usb647";
desc = "AT90USB647";
signature = 0x1e 0x96 0x82;
ocdrev = 3;
;
#------------------------------------------------------------
# AT90USB1286
#------------------------------------------------------------
part
id = "usb1286";
desc = "AT90USB1286";
signature = 0x1e 0x97 0x82;
usbpid = 0x2ffb;
has_jtag = yes;
# stk500_devcode = 0xB2;
# avr910_devcode = 0x43;
chip_erase_delay = 9000;
pagel = 0xD7;
bs2 = 0xA0;
reset = dedicated;
pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1",
"x x x x x x x x x x x x x x x x";
chip_erase = "1 0 1 0 1 1 0 0 1 0 0 0 0 0 0 0",
"x x x x x x x x x x x x x x x x";
timeout = 200;
stabdelay = 100;
cmdexedelay = 25;
synchloops = 32;
bytedelay = 0;
pollindex = 3;
pollvalue = 0x53;
predelay = 1;
postdelay = 1;
pollmethod = 1;
pp_controlstack =
0x0E, 0x1E, 0x0F, 0x1F, 0x2E, 0x3E, 0x2F, 0x3F,
0x4E, 0x5E, 0x4F, 0x5F, 0x6E, 0x7E, 0x6F, 0x7F,
0x66, 0x76, 0x67, 0x77, 0x6A, 0x7A, 0x6B, 0x7B,
0xBE, 0xFD, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00;
hventerstabdelay = 100;
progmodedelay = 0;
latchcycles = 5;
togglevtg = 1;
poweroffdelay = 15;
resetdelayms = 1;
resetdelayus = 0;
hvleavestabdelay = 15;
chiperasepulsewidth = 0;
chiperasepolltimeout = 10;
programfusepulsewidth = 0;
programfusepolltimeout = 5;
programlockpulsewidth = 0;
programlockpolltimeout = 5;
idr = 0x31;
spmcr = 0x57;
rampz = 0x3b;
allowfullpagebitstream = no;
ocdrev = 3;
memory "eeprom"
paged = no; /* leave this "no" */
page_size = 8; /* for parallel programming */
size = 4096;
min_write_delay = 9000;
max_write_delay = 9000;
readback_p1 = 0x00;
readback_p2 = 0x00;
read = " 1 0 1 0 0 0 0 0",
" x x x x a11 a10 a9 a8",
" a7 a6 a5 a4 a3 a2 a1 a0",
" o o o o o o o o";
write = " 1 1 0 0 0 0 0 0",
" x x x x a11 a10 a9 a8",
" a7 a6 a5 a4 a3 a2 a1 a0",
" i i i i i i i i";
loadpage_lo = " 1 1 0 0 0 0 0 1",
" 0 0 0 0 0 0 0 0",
" 0 0 0 0 0 a2 a1 a0",
" i i i i i i i i";
writepage = " 1 1 0 0 0 0 1 0",
" 0 0 x x x a10 a9 a8",
" a7 a6 a5 a4 a3 0 0 0",
" x x x x x x x x";
mode = 0x41;
delay = 10;
blocksize = 8;
readsize = 256;
;
memory "flash"
paged = yes;
size = 131072;
page_size = 256;
num_pages = 512;
min_write_delay = 4500;
max_write_delay = 4500;
readback_p1 = 0x00;
readback_p2 = 0x00;
read_lo = " 0 0 1 0 0 0 0 0",
"a15 a14 a13 a12 a11 a10 a9 a8",
" a7 a6 a5 a4 a3 a2 a1 a0",
" o o o o o o o o";
read_hi = " 0 0 1 0 1 0 0 0",
"a15 a14 a13 a12 a11 a10 a9 a8",
" a7 a6 a5 a4 a3 a2 a1 a0",
" o o o o o o o o";
loadpage_lo = " 0 1 0 0 0 0 0 0",
" x x x x x x x x",
" x a6 a5 a4 a3 a2 a1 a0",
" i i i i i i i i";
loadpage_hi = " 0 1 0 0 1 0 0 0",
" x x x x x x x x",
" x a6 a5 a4 a3 a2 a1 a0",
" i i i i i i i i";
writepage = " 0 1 0 0 1 1 0 0",
"a15 a14 a13 a12 a11 a10 a9 a8",
" a7 x x x x x x x",
" x x x x x x x x";
mode = 0x41;
delay = 6;
blocksize = 256;
readsize = 256;
;
memory "lfuse"
size = 1;
write = "1 0 1 0 1 1 0 0 1 0 1 0 0 0 0 0",
"x x x x x x x x i i i i i i i i";
read = "0 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0",
"x x x x x x x x o o o o o o o o";
min_write_delay = 9000;
max_write_delay = 9000;
;
memory "hfuse"
size = 1;
write = "1 0 1 0 1 1 0 0 1 0 1 0 1 0 0 0",
"x x x x x x x x i i i i i i i i";
read = "0 1 0 1 1 0 0 0 0 0 0 0 1 0 0 0",
"x x x x x x x x o o o o o o o o";
min_write_delay = 9000;
max_write_delay = 9000;
;
memory "efuse"
size = 1;
write = "1 0 1 0 1 1 0 0 1 0 1 0 0 1 0 0",
"x x x x x x x x x x x x i i i i";
read = "0 1 0 1 0 0 0 0 0 0 0 0 1 0 0 0",
"x x x x x x x x o o o o o o o o";
min_write_delay = 9000;
max_write_delay = 9000;
;
memory "lock"
size = 1;
read = "0 1 0 1 1 0 0 0 0 0 0 0 0 0 0 0",
"x x x x x x x x x x o o o o o o";
write = "1 0 1 0 1 1 0 0 1 1 1 x x x x x",
"x x x x x x x x 1 1 i i i i i i";
min_write_delay = 9000;
max_write_delay = 9000;
;
memory "calibration"
size = 1;
read = "0 0 1 1 1 0 0 0 x x x x x x x x",
"0 0 0 0 0 0 0 0 o o o o o o o o";
;
memory "signature"
size = 3;
read = "0 0 1 1 0 0 0 0 x x x x x x x x",
"x x x x x x a1 a0 o o o o o o o o";
;
;
#------------------------------------------------------------
# AT90USB1287
#------------------------------------------------------------
# identical to AT90USB1286
part parent "usb1286"
id = "usb1287";
desc = "AT90USB1287";
signature = 0x1e 0x97 0x82;
ocdrev = 3;
;
#------------------------------------------------------------
# AT90USB162
#------------------------------------------------------------
part
id = "usb162";
desc = "AT90USB162";
has_jtag = no;
has_debugwire = yes;
signature = 0x1e 0x94 0x82;
usbpid = 0x2ffa;
chip_erase_delay = 9000;
reset = io;
pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1",
"x x x x x x x x x x x x x x x x";
chip_erase = "1 0 1 0 1 1 0 0 1 0 0 x x x x x",
"x x x x x x x x x x x x x x x x";
pagel = 0xD7;
bs2 = 0xC6;
timeout = 200;
stabdelay = 100;
cmdexedelay = 25;
synchloops = 32;
bytedelay = 0;
pollindex = 3;
pollvalue = 0x53;
predelay = 1;
postdelay = 1;
pollmethod = 1;
pp_controlstack =
0x0E, 0x1E, 0x0F, 0x1F, 0x2E, 0x3E, 0x2F, 0x3F,
0x4E, 0x5E, 0x4F, 0x5F, 0x6E, 0x7E, 0x6F, 0x7F,
0x66, 0x76, 0x67, 0x77, 0x6A, 0x7A, 0x6B, 0x7B,
0xBE, 0xFD, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00;
hventerstabdelay = 100;
progmodedelay = 0;
latchcycles = 5;
togglevtg = 1;
poweroffdelay = 15;
resetdelayms = 1;
resetdelayus = 0;
hvleavestabdelay = 15;
chiperasepulsewidth = 0;
chiperasepolltimeout = 10;
programfusepulsewidth = 0;
programfusepolltimeout = 5;
programlockpulsewidth = 0;
programlockpolltimeout = 5;
ocdrev = 1;
memory "eeprom"
paged = no; /* leave this "no" */
page_size = 4; /* for parallel programming */
size = 512;
num_pages = 128;
min_write_delay = 9000;
max_write_delay = 9000;
readback_p1 = 0x00;
readback_p2 = 0x00;
read = " 1 0 1 0 0 0 0 0",
" 0 0 0 0 a11 a10 a9 a8",
" a7 a6 a5 a4 a3 a2 a1 a0",
" o o o o o o o o";
write = " 1 1 0 0 0 0 0 0",
" 0 0 0 0 a11 a10 a9 a8",
" a7 a6 a5 a4 a3 a2 a1 a0",
" i i i i i i i i";
loadpage_lo = " 1 1 0 0 0 0 0 1",
" 0 0 0 0 0 0 0 0",
" 0 0 0 0 0 0 a1 a0",
" i i i i i i i i";
writepage = " 1 1 0 0 0 0 1 0",
" 0 0 0 0 a11 a10 a9 a8",
" a7 a6 a5 a4 a3 a2 0 0",
" x x x x x x x x";
mode = 0x41;
delay = 20;
blocksize = 4;
readsize = 256;
;
memory "flash"
paged = yes;
size = 16384;
page_size = 128;
num_pages = 128;
min_write_delay = 4500;
max_write_delay = 4500;
readback_p1 = 0x00;
readback_p2 = 0x00;
read_lo = " 0 0 1 0 0 0 0 0",
"a15 a14 a13 a12 a11 a10 a9 a8",
" a7 a6 a5 a4 a3 a2 a1 a0",
" o o o o o o o o";
read_hi = " 0 0 1 0 1 0 0 0",
"a15 a14 a13 a12 a11 a10 a9 a8",
" a7 a6 a5 a4 a3 a2 a1 a0",
" o o o o o o o o";
loadpage_lo = " 0 1 0 0 0 0 0 0",
" x x x x x x x x",
" x x a5 a4 a3 a2 a1 a0",
" i i i i i i i i";
loadpage_hi = " 0 1 0 0 1 0 0 0",
" x x x x x x x x",
" x x a5 a4 a3 a2 a1 a0",
" i i i i i i i i";
writepage = " 0 1 0 0 1 1 0 0",
"a15 a14 a13 a12 a11 a10 a9 a8",
" a7 a6 x x x x x x",
" x x x x x x x x";
mode = 0x41;
delay = 6;
blocksize = 128;
readsize = 256;
;
memory "lfuse"
size = 1;
write = "1 0 1 0 1 1 0 0 1 0 1 0 0 0 0 0",
"x x x x x x x x i i i i i i i i";
read = "0 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0",
"x x x x x x x x o o o o o o o o";
min_write_delay = 9000;
max_write_delay = 9000;
;
memory "hfuse"
size = 1;
write = "1 0 1 0 1 1 0 0 1 0 1 0 1 0 0 0",
"x x x x x x x x i i i i i i i i";
read = "0 1 0 1 1 0 0 0 0 0 0 0 1 0 0 0",
"x x x x x x x x o o o o o o o o";
min_write_delay = 9000;
max_write_delay = 9000;
;
memory "efuse"
size = 1;
write = "1 0 1 0 1 1 0 0 1 0 1 0 0 1 0 0",
"x x x x x x x x i i i i i i i i";
read = "0 1 0 1 0 0 0 0 0 0 0 0 1 0 0 0",
"x x x x x x x x o o o o o o o o";
min_write_delay = 9000;
max_write_delay = 9000;
;
memory "lock"
size = 1;
read = "0 1 0 1 1 0 0 0 0 0 0 0 0 0 0 0",
"x x x x x x x x x x o o o o o o";
write = "1 0 1 0 1 1 0 0 1 1 1 x x x x x",
"x x x x x x x x 1 1 i i i i i i";
min_write_delay = 9000;
max_write_delay = 9000;
;
memory "calibration"
size = 1;
read = "0 0 1 1 1 0 0 0 0 0 0 x x x x x",
"0 0 0 0 0 0 0 0 o o o o o o o o";
;
memory "signature"
size = 3;
read = "0 0 1 1 0 0 0 0 0 0 0 x x x x x",
"x x x x x x a1 a0 o o o o o o o o";
;
;
#------------------------------------------------------------
# AT90USB82
#------------------------------------------------------------
# Changes against AT90USB162 (beside IDs)
# memory "flash"
# size = 8192;
# num_pages = 64;
part
id = "usb82";
desc = "AT90USB82";
has_jtag = no;
has_debugwire = yes;
signature = 0x1e 0x93 0x82;
usbpid = 0x2ff7;
chip_erase_delay = 9000;
reset = io;
pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1",
"x x x x x x x x x x x x x x x x";
chip_erase = "1 0 1 0 1 1 0 0 1 0 0 x x x x x",
"x x x x x x x x x x x x x x x x";
pagel = 0xD7;
bs2 = 0xC6;
timeout = 200;
stabdelay = 100;
cmdexedelay = 25;
synchloops = 32;
bytedelay = 0;
pollindex = 3;
pollvalue = 0x53;
predelay = 1;
postdelay = 1;
pollmethod = 1;
pp_controlstack =
0x0E, 0x1E, 0x0F, 0x1F, 0x2E, 0x3E, 0x2F, 0x3F,
0x4E, 0x5E, 0x4F, 0x5F, 0x6E, 0x7E, 0x6F, 0x7F,
0x66, 0x76, 0x67, 0x77, 0x6A, 0x7A, 0x6B, 0x7B,
0xBE, 0xFD, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00;
hventerstabdelay = 100;
progmodedelay = 0;
latchcycles = 5;
togglevtg = 1;
poweroffdelay = 15;
resetdelayms = 1;
resetdelayus = 0;
hvleavestabdelay = 15;
chiperasepulsewidth = 0;
chiperasepolltimeout = 10;
programfusepulsewidth = 0;
programfusepolltimeout = 5;
programlockpulsewidth = 0;
programlockpolltimeout = 5;
ocdrev = 1;
memory "eeprom"
paged = no; /* leave this "no" */
page_size = 4; /* for parallel programming */
size = 512;
num_pages = 128;
min_write_delay = 9000;
max_write_delay = 9000;
readback_p1 = 0x00;
readback_p2 = 0x00;
read = " 1 0 1 0 0 0 0 0",
" 0 0 0 0 a11 a10 a9 a8",
" a7 a6 a5 a4 a3 a2 a1 a0",
" o o o o o o o o";
write = " 1 1 0 0 0 0 0 0",
" 0 0 0 0 a11 a10 a9 a8",
" a7 a6 a5 a4 a3 a2 a1 a0",
" i i i i i i i i";
loadpage_lo = " 1 1 0 0 0 0 0 1",
" 0 0 0 0 0 0 0 0",
" 0 0 0 0 0 0 a1 a0",
" i i i i i i i i";
writepage = " 1 1 0 0 0 0 1 0",
" 0 0 0 0 a11 a10 a9 a8",
" a7 a6 a5 a4 a3 a2 0 0",
" x x x x x x x x";
mode = 0x41;
delay = 20;
blocksize = 4;
readsize = 256;
;
memory "flash"
paged = yes;
size = 8192;
page_size = 128;
num_pages = 64;
min_write_delay = 4500;
max_write_delay = 4500;
readback_p1 = 0x00;
readback_p2 = 0x00;
read_lo = " 0 0 1 0 0 0 0 0",
"a15 a14 a13 a12 a11 a10 a9 a8",
" a7 a6 a5 a4 a3 a2 a1 a0",
" o o o o o o o o";
read_hi = " 0 0 1 0 1 0 0 0",
"a15 a14 a13 a12 a11 a10 a9 a8",
" a7 a6 a5 a4 a3 a2 a1 a0",
" o o o o o o o o";
loadpage_lo = " 0 1 0 0 0 0 0 0",
" x x x x x x x x",
" x x a5 a4 a3 a2 a1 a0",
" i i i i i i i i";
loadpage_hi = " 0 1 0 0 1 0 0 0",
" x x x x x x x x",
" x x a5 a4 a3 a2 a1 a0",
" i i i i i i i i";
writepage = " 0 1 0 0 1 1 0 0",
"a15 a14 a13 a12 a11 a10 a9 a8",
" a7 a6 x x x x x x",
" x x x x x x x x";
mode = 0x41;
delay = 6;
blocksize = 128;
readsize = 256;
;
memory "lfuse"
size = 1;
write = "1 0 1 0 1 1 0 0 1 0 1 0 0 0 0 0",
"x x x x x x x x i i i i i i i i";
read = "0 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0",
"x x x x x x x x o o o o o o o o";
min_write_delay = 9000;
max_write_delay = 9000;
;
memory "hfuse"
size = 1;
write = "1 0 1 0 1 1 0 0 1 0 1 0 1 0 0 0",
"x x x x x x x x i i i i i i i i";
read = "0 1 0 1 1 0 0 0 0 0 0 0 1 0 0 0",
"x x x x x x x x o o o o o o o o";
min_write_delay = 9000;
max_write_delay = 9000;
;
memory "efuse"
size = 1;
write = "1 0 1 0 1 1 0 0 1 0 1 0 0 1 0 0",
"x x x x x x x x i i i i i i i i";
read = "0 1 0 1 0 0 0 0 0 0 0 0 1 0 0 0",
"x x x x x x x x o o o o o o o o";
min_write_delay = 9000;
max_write_delay = 9000;
;
memory "lock"
size = 1;
read = "0 1 0 1 1 0 0 0 0 0 0 0 0 0 0 0",
"x x x x x x x x x x o o o o o o";
write = "1 0 1 0 1 1 0 0 1 1 1 x x x x x",
"x x x x x x x x 1 1 i i i i i i";
min_write_delay = 9000;
max_write_delay = 9000;
;
memory "calibration"
size = 1;
read = "0 0 1 1 1 0 0 0 0 0 0 x x x x x",
"0 0 0 0 0 0 0 0 o o o o o o o o";
;
memory "signature"
size = 3;
read = "0 0 1 1 0 0 0 0 0 0 0 x x x x x",
"x x x x x x a1 a0 o o o o o o o o";
;
;
#------------------------------------------------------------
# ATmega32U2
#------------------------------------------------------------
# Changes against AT90USB162 (beside IDs)
# memory "flash"
# size = 32768;
# num_pages = 256;
# memory "eeprom"
# size = 1024;
# num_pages = 256;
part
id = "m32u2";
desc = "ATmega32U2";
has_jtag = no;
has_debugwire = yes;
signature = 0x1e 0x95 0x8a;
usbpid = 0x2ff0;
chip_erase_delay = 9000;
reset = io;
pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1",
"x x x x x x x x x x x x x x x x";
chip_erase = "1 0 1 0 1 1 0 0 1 0 0 x x x x x",
"x x x x x x x x x x x x x x x x";
pagel = 0xD7;
bs2 = 0xC6;
timeout = 200;
stabdelay = 100;
cmdexedelay = 25;
synchloops = 32;
bytedelay = 0;
pollindex = 3;
pollvalue = 0x53;
predelay = 1;
postdelay = 1;
pollmethod = 1;
pp_controlstack =
0x0E, 0x1E, 0x0F, 0x1F, 0x2E, 0x3E, 0x2F, 0x3F,
0x4E, 0x5E, 0x4F, 0x5F, 0x6E, 0x7E, 0x6F, 0x7F,
0x66, 0x76, 0x67, 0x77, 0x6A, 0x7A, 0x6B, 0x7B,
0xBE, 0xFD, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00;
hventerstabdelay = 100;
progmodedelay = 0;
latchcycles = 5;
togglevtg = 1;
poweroffdelay = 15;
resetdelayms = 1;
resetdelayus = 0;
hvleavestabdelay = 15;
chiperasepulsewidth = 0;
chiperasepolltimeout = 10;
programfusepulsewidth = 0;
programfusepolltimeout = 5;
programlockpulsewidth = 0;
programlockpolltimeout = 5;
ocdrev = 1;
memory "eeprom"
paged = no; /* leave this "no" */
page_size = 4; /* for parallel programming */
size = 1024;
num_pages = 256;
min_write_delay = 9000;
max_write_delay = 9000;
readback_p1 = 0x00;
readback_p2 = 0x00;
read = " 1 0 1 0 0 0 0 0",
" 0 0 0 0 a11 a10 a9 a8",
" a7 a6 a5 a4 a3 a2 a1 a0",
" o o o o o o o o";
write = " 1 1 0 0 0 0 0 0",
" 0 0 0 0 a11 a10 a9 a8",
" a7 a6 a5 a4 a3 a2 a1 a0",
" i i i i i i i i";
loadpage_lo = " 1 1 0 0 0 0 0 1",
" 0 0 0 0 0 0 0 0",
" 0 0 0 0 0 0 a1 a0",
" i i i i i i i i";
writepage = " 1 1 0 0 0 0 1 0",
" 0 0 0 0 a11 a10 a9 a8",
" a7 a6 a5 a4 a3 a2 0 0",
" x x x x x x x x";
mode = 0x41;
delay = 20;
blocksize = 4;
readsize = 256;
;
memory "flash"
paged = yes;
size = 32768;
page_size = 128;
num_pages = 256;
min_write_delay = 4500;
max_write_delay = 4500;
readback_p1 = 0x00;
readback_p2 = 0x00;
read_lo = " 0 0 1 0 0 0 0 0",
"a15 a14 a13 a12 a11 a10 a9 a8",
" a7 a6 a5 a4 a3 a2 a1 a0",
" o o o o o o o o";
read_hi = " 0 0 1 0 1 0 0 0",
"a15 a14 a13 a12 a11 a10 a9 a8",
" a7 a6 a5 a4 a3 a2 a1 a0",
" o o o o o o o o";
loadpage_lo = " 0 1 0 0 0 0 0 0",
" x x x x x x x x",
" x x a5 a4 a3 a2 a1 a0",
" i i i i i i i i";
loadpage_hi = " 0 1 0 0 1 0 0 0",
" x x x x x x x x",
" x x a5 a4 a3 a2 a1 a0",
" i i i i i i i i";
writepage = " 0 1 0 0 1 1 0 0",
"a15 a14 a13 a12 a11 a10 a9 a8",
" a7 a6 x x x x x x",
" x x x x x x x x";
mode = 0x41;
delay = 6;
blocksize = 128;
readsize = 256;
;
memory "lfuse"
size = 1;
write = "1 0 1 0 1 1 0 0 1 0 1 0 0 0 0 0",
"x x x x x x x x i i i i i i i i";
read = "0 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0",
"x x x x x x x x o o o o o o o o";
min_write_delay = 9000;
max_write_delay = 9000;
;
memory "hfuse"
size = 1;
write = "1 0 1 0 1 1 0 0 1 0 1 0 1 0 0 0",
"x x x x x x x x i i i i i i i i";
read = "0 1 0 1 1 0 0 0 0 0 0 0 1 0 0 0",
"x x x x x x x x o o o o o o o o";
min_write_delay = 9000;
max_write_delay = 9000;
;
memory "efuse"
size = 1;
write = "1 0 1 0 1 1 0 0 1 0 1 0 0 1 0 0",
"x x x x x x x x i i i i i i i i";
read = "0 1 0 1 0 0 0 0 0 0 0 0 1 0 0 0",
"x x x x x x x x o o o o o o o o";
min_write_delay = 9000;
max_write_delay = 9000;
;
memory "lock"
size = 1;
read = "0 1 0 1 1 0 0 0 0 0 0 0 0 0 0 0",
"x x x x x x x x x x o o o o o o";
write = "1 0 1 0 1 1 0 0 1 1 1 x x x x x",
"x x x x x x x x 1 1 i i i i i i";
min_write_delay = 9000;
max_write_delay = 9000;
;
memory "calibration"
size = 1;
read = "0 0 1 1 1 0 0 0 0 0 0 x x x x x",
"0 0 0 0 0 0 0 0 o o o o o o o o";
;
memory "signature"
size = 3;
read = "0 0 1 1 0 0 0 0 0 0 0 x x x x x",
"x x x x x x a1 a0 o o o o o o o o";
;
;
#------------------------------------------------------------
# ATmega16U2
#------------------------------------------------------------
# Changes against ATmega32U2 (beside IDs)
# memory "flash"
# size = 16384;
# num_pages = 128;
# memory "eeprom"
# size = 512;
# num_pages = 128;
part
id = "m16u2";
desc = "ATmega16U2";
has_jtag = no;
has_debugwire = yes;
signature = 0x1e 0x94 0x89;
usbpid = 0x2fef;
chip_erase_delay = 9000;
reset = io;
pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1",
"x x x x x x x x x x x x x x x x";
chip_erase = "1 0 1 0 1 1 0 0 1 0 0 x x x x x",
"x x x x x x x x x x x x x x x x";
pagel = 0xD7;
bs2 = 0xC6;
timeout = 200;
stabdelay = 100;
cmdexedelay = 25;
synchloops = 32;
bytedelay = 0;
pollindex = 3;
pollvalue = 0x53;
predelay = 1;
postdelay = 1;
pollmethod = 1;
pp_controlstack =
0x0E, 0x1E, 0x0F, 0x1F, 0x2E, 0x3E, 0x2F, 0x3F,
0x4E, 0x5E, 0x4F, 0x5F, 0x6E, 0x7E, 0x6F, 0x7F,
0x66, 0x76, 0x67, 0x77, 0x6A, 0x7A, 0x6B, 0x7B,
0xBE, 0xFD, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00;
hventerstabdelay = 100;
progmodedelay = 0;
latchcycles = 5;
togglevtg = 1;
poweroffdelay = 15;
resetdelayms = 1;
resetdelayus = 0;
hvleavestabdelay = 15;
chiperasepulsewidth = 0;
chiperasepolltimeout = 10;
programfusepulsewidth = 0;
programfusepolltimeout = 5;
programlockpulsewidth = 0;
programlockpolltimeout = 5;
ocdrev = 1;
memory "eeprom"
paged = no; /* leave this "no" */
page_size = 4; /* for parallel programming */
size = 512;
num_pages = 128;
min_write_delay = 9000;
max_write_delay = 9000;
readback_p1 = 0x00;
readback_p2 = 0x00;
read = " 1 0 1 0 0 0 0 0",
" 0 0 0 0 a11 a10 a9 a8",
" a7 a6 a5 a4 a3 a2 a1 a0",
" o o o o o o o o";
write = " 1 1 0 0 0 0 0 0",
" 0 0 0 0 a11 a10 a9 a8",
" a7 a6 a5 a4 a3 a2 a1 a0",
" i i i i i i i i";
loadpage_lo = " 1 1 0 0 0 0 0 1",
" 0 0 0 0 0 0 0 0",
" 0 0 0 0 0 0 a1 a0",
" i i i i i i i i";
writepage = " 1 1 0 0 0 0 1 0",
" 0 0 0 0 a11 a10 a9 a8",
" a7 a6 a5 a4 a3 a2 0 0",
" x x x x x x x x";
mode = 0x41;
delay = 20;
blocksize = 4;
readsize = 256;
;
memory "flash"
paged = yes;
size = 16384;
page_size = 128;
num_pages = 128;
min_write_delay = 4500;
max_write_delay = 4500;
readback_p1 = 0x00;
readback_p2 = 0x00;
read_lo = " 0 0 1 0 0 0 0 0",
"a15 a14 a13 a12 a11 a10 a9 a8",
" a7 a6 a5 a4 a3 a2 a1 a0",
" o o o o o o o o";
read_hi = " 0 0 1 0 1 0 0 0",
"a15 a14 a13 a12 a11 a10 a9 a8",
" a7 a6 a5 a4 a3 a2 a1 a0",
" o o o o o o o o";
loadpage_lo = " 0 1 0 0 0 0 0 0",
" x x x x x x x x",
" x x a5 a4 a3 a2 a1 a0",
" i i i i i i i i";
loadpage_hi = " 0 1 0 0 1 0 0 0",
" x x x x x x x x",
" x x a5 a4 a3 a2 a1 a0",
" i i i i i i i i";
writepage = " 0 1 0 0 1 1 0 0",
"a15 a14 a13 a12 a11 a10 a9 a8",
" a7 a6 x x x x x x",
" x x x x x x x x";
mode = 0x41;
delay = 6;
blocksize = 128;
readsize = 256;
;
memory "lfuse"
size = 1;
write = "1 0 1 0 1 1 0 0 1 0 1 0 0 0 0 0",
"x x x x x x x x i i i i i i i i";
read = "0 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0",
"x x x x x x x x o o o o o o o o";
min_write_delay = 9000;
max_write_delay = 9000;
;
memory "hfuse"
size = 1;
write = "1 0 1 0 1 1 0 0 1 0 1 0 1 0 0 0",
"x x x x x x x x i i i i i i i i";
read = "0 1 0 1 1 0 0 0 0 0 0 0 1 0 0 0",
"x x x x x x x x o o o o o o o o";
min_write_delay = 9000;
max_write_delay = 9000;
;
memory "efuse"
size = 1;
write = "1 0 1 0 1 1 0 0 1 0 1 0 0 1 0 0",
"x x x x x x x x i i i i i i i i";
read = "0 1 0 1 0 0 0 0 0 0 0 0 1 0 0 0",
"x x x x x x x x o o o o o o o o";
min_write_delay = 9000;
max_write_delay = 9000;
;
memory "lock"
size = 1;
read = "0 1 0 1 1 0 0 0 0 0 0 0 0 0 0 0",
"x x x x x x x x x x o o o o o o";
write = "1 0 1 0 1 1 0 0 1 1 1 x x x x x",
"x x x x x x x x 1 1 i i i i i i";
min_write_delay = 9000;
max_write_delay = 9000;
;
memory "calibration"
size = 1;
read = "0 0 1 1 1 0 0 0 0 0 0 x x x x x",
"0 0 0 0 0 0 0 0 o o o o o o o o";
;
memory "signature"
size = 3;
read = "0 0 1 1 0 0 0 0 0 0 0 x x x x x",
"x x x x x x a1 a0 o o o o o o o o";
;
;
#------------------------------------------------------------
# ATmega8U2
#------------------------------------------------------------
# Changes against ATmega16U2 (beside IDs)
# memory "flash"
# size = 8192;
# page_size = 64;
# blocksize = 64;
part
id = "m8u2";
desc = "ATmega8U2";
has_jtag = no;
has_debugwire = yes;
signature = 0x1e 0x93 0x89;
usbpid = 0x2fee;
chip_erase_delay = 9000;
reset = io;
pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1",
"x x x x x x x x x x x x x x x x";
chip_erase = "1 0 1 0 1 1 0 0 1 0 0 x x x x x",
"x x x x x x x x x x x x x x x x";
pagel = 0xD7;
bs2 = 0xC6;
timeout = 200;
stabdelay = 100;
cmdexedelay = 25;
synchloops = 32;
bytedelay = 0;
pollindex = 3;
pollvalue = 0x53;
predelay = 1;
postdelay = 1;
pollmethod = 1;
pp_controlstack =
0x0E, 0x1E, 0x0F, 0x1F, 0x2E, 0x3E, 0x2F, 0x3F,
0x4E, 0x5E, 0x4F, 0x5F, 0x6E, 0x7E, 0x6F, 0x7F,
0x66, 0x76, 0x67, 0x77, 0x6A, 0x7A, 0x6B, 0x7B,
0xBE, 0xFD, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00;
hventerstabdelay = 100;
progmodedelay = 0;
latchcycles = 5;
togglevtg = 1;
poweroffdelay = 15;
resetdelayms = 1;
resetdelayus = 0;
hvleavestabdelay = 15;
chiperasepulsewidth = 0;
chiperasepolltimeout = 10;
programfusepulsewidth = 0;
programfusepolltimeout = 5;
programlockpulsewidth = 0;
programlockpolltimeout = 5;
ocdrev = 1;
memory "eeprom"
paged = no; /* leave this "no" */
page_size = 4; /* for parallel programming */
size = 512;
num_pages = 128;
min_write_delay = 9000;
max_write_delay = 9000;
readback_p1 = 0x00;
readback_p2 = 0x00;
read = " 1 0 1 0 0 0 0 0",
" 0 0 0 0 a11 a10 a9 a8",
" a7 a6 a5 a4 a3 a2 a1 a0",
" o o o o o o o o";
write = " 1 1 0 0 0 0 0 0",
" 0 0 0 0 a11 a10 a9 a8",
" a7 a6 a5 a4 a3 a2 a1 a0",
" i i i i i i i i";
loadpage_lo = " 1 1 0 0 0 0 0 1",
" 0 0 0 0 0 0 0 0",
" 0 0 0 0 0 0 a1 a0",
" i i i i i i i i";
writepage = " 1 1 0 0 0 0 1 0",
" 0 0 0 0 a11 a10 a9 a8",
" a7 a6 a5 a4 a3 a2 0 0",
" x x x x x x x x";
mode = 0x41;
delay = 20;
blocksize = 4;
readsize = 256;
;
memory "flash"
paged = yes;
size = 8192;
page_size = 64;
num_pages = 128;
min_write_delay = 4500;
max_write_delay = 4500;
readback_p1 = 0x00;
readback_p2 = 0x00;
read_lo = " 0 0 1 0 0 0 0 0",
"a15 a14 a13 a12 a11 a10 a9 a8",
" a7 a6 a5 a4 a3 a2 a1 a0",
" o o o o o o o o";
read_hi = " 0 0 1 0 1 0 0 0",
"a15 a14 a13 a12 a11 a10 a9 a8",
" a7 a6 a5 a4 a3 a2 a1 a0",
" o o o o o o o o";
loadpage_lo = " 0 1 0 0 0 0 0 0",
" x x x x x x x x",
" x x a5 a4 a3 a2 a1 a0",
" i i i i i i i i";
loadpage_hi = " 0 1 0 0 1 0 0 0",
" x x x x x x x x",
" x x a5 a4 a3 a2 a1 a0",
" i i i i i i i i";
writepage = " 0 1 0 0 1 1 0 0",
"a15 a14 a13 a12 a11 a10 a9 a8",
" a7 a6 x x x x x x",
" x x x x x x x x";
mode = 0x41;
delay = 6;
blocksize = 64;
readsize = 256;
;
memory "lfuse"
size = 1;
write = "1 0 1 0 1 1 0 0 1 0 1 0 0 0 0 0",
"x x x x x x x x i i i i i i i i";
read = "0 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0",
"x x x x x x x x o o o o o o o o";
min_write_delay = 9000;
max_write_delay = 9000;
;
memory "hfuse"
size = 1;
write = "1 0 1 0 1 1 0 0 1 0 1 0 1 0 0 0",
"x x x x x x x x i i i i i i i i";
read = "0 1 0 1 1 0 0 0 0 0 0 0 1 0 0 0",
"x x x x x x x x o o o o o o o o";
min_write_delay = 9000;
max_write_delay = 9000;
;
memory "efuse"
size = 1;
write = "1 0 1 0 1 1 0 0 1 0 1 0 0 1 0 0",
"x x x x x x x x i i i i i i i i";
read = "0 1 0 1 0 0 0 0 0 0 0 0 1 0 0 0",
"x x x x x x x x o o o o o o o o";
min_write_delay = 9000;
max_write_delay = 9000;
;
memory "lock"
size = 1;
read = "0 1 0 1 1 0 0 0 0 0 0 0 0 0 0 0",
"x x x x x x x x x x o o o o o o";
write = "1 0 1 0 1 1 0 0 1 1 1 x x x x x",
"x x x x x x x x 1 1 i i i i i i";
min_write_delay = 9000;
max_write_delay = 9000;
;
memory "calibration"
size = 1;
read = "0 0 1 1 1 0 0 0 0 0 0 x x x x x",
"0 0 0 0 0 0 0 0 o o o o o o o o";
;
memory "signature"
size = 3;
read = "0 0 1 1 0 0 0 0 0 0 0 x x x x x",
"x x x x x x a1 a0 o o o o o o o o";
;
;
#------------------------------------------------------------
# ATmega325
#------------------------------------------------------------
part
id = "m325";
desc = "ATmega325";
signature = 0x1e 0x95 0x05;
has_jtag = yes;
# stk500_devcode = 0x??; # No STK500v1 support?
# avr910_devcode = 0x??; # Try the ATmega16 one
avr910_devcode = 0x74;
pagel = 0xd7;
bs2 = 0xa0;
chip_erase_delay = 9000;
pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1",
"0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0";
chip_erase = "1 0 1 0 1 1 0 0 1 0 0 0 0 0 0 0",
"0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0";
timeout = 200;
stabdelay = 100;
cmdexedelay = 25;
synchloops = 32;
bytedelay = 0;
pollindex = 3;
pollvalue = 0x53;
predelay = 1;
postdelay = 1;
pollmethod = 1;
pp_controlstack =
0x0E, 0x1E, 0x0F, 0x1F, 0x2E, 0x3E, 0x2F, 0x3F,
0x4E, 0x5E, 0x4F, 0x5F, 0x6E, 0x7E, 0x6F, 0x7F,
0x66, 0x76, 0x67, 0x77, 0x6A, 0x7A, 0x6B, 0x7B,
0xBE, 0xFD, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00;
hventerstabdelay = 100;
progmodedelay = 0;
latchcycles = 5;
togglevtg = 1;
poweroffdelay = 15;
resetdelayms = 1;
resetdelayus = 0;
hvleavestabdelay = 15;
chiperasepulsewidth = 0;
chiperasepolltimeout = 10;
programfusepulsewidth = 0;
programfusepolltimeout = 5;
programlockpulsewidth = 0;
programlockpolltimeout = 5;
idr = 0x31;
spmcr = 0x57;
allowfullpagebitstream = no;
ocdrev = 3;
memory "eeprom"
paged = no; /* leave this "no" */
page_size = 4; /* for parallel programming */
size = 1024;
min_write_delay = 9000;
max_write_delay = 9000;
readback_p1 = 0xff;
readback_p2 = 0xff;
read = " 1 0 1 0 0 0 0 0",
" 0 0 0 0 0 0 a9 a8",
" a7 a6 a5 a4 a3 a2 a1 a0",
" o o o o o o o o";
write = " 1 1 0 0 0 0 0 0",
" 0 0 0 0 0 0 a9 a8",
" a7 a6 a5 a4 a3 a2 a1 a0",
" i i i i i i i i";
loadpage_lo = " 1 1 0 0 0 0 0 1",
" 0 0 0 0 0 0 0 0",
" 0 0 0 0 0 0 a1 a0",
" i i i i i i i i";
writepage = " 1 1 0 0 0 0 1 0",
" 0 0 0 0 0 0 a9 a8",
" a7 a6 a5 a4 a3 a2 0 0",
" x x x x x x x x";
mode = 0x41;
delay = 10;
blocksize = 4;
readsize = 256;
;
memory "flash"
paged = yes;
size = 32768;
page_size = 128;
num_pages = 256;
min_write_delay = 4500;
max_write_delay = 4500;
readback_p1 = 0xff;
readback_p2 = 0xff;
read_lo = " 0 0 1 0 0 0 0 0",
" 0 a14 a13 a12 a11 a10 a9 a8",
" a7 a6 a5 a4 a3 a2 a1 a0",
" o o o o o o o o";
read_hi = " 0 0 1 0 1 0 0 0",
" 0 a14 a13 a12 a11 a10 a9 a8",
" a7 a6 a5 a4 a3 a2 a1 a0",
" o o o o o o o o";
loadpage_lo = " 0 1 0 0 0 0 0 0",
" 0 0 0 0 0 0 0 0",
" a7 a6 a5 a4 a3 a2 a1 a0",
" i i i i i i i i";
loadpage_hi = " 0 1 0 0 1 0 0 0",
" 0 0 0 0 0 0 0 0",
" a7 a6 a5 a4 a3 a2 a1 a0",
" i i i i i i i i";
writepage = " 0 1 0 0 1 1 0 0",
" 0 a14 a13 a12 a11 a10 a9 a8",
" a7 a6 a5 a4 a3 a2 a1 a0",
" x x x x x x x x";
mode = 0x41;
delay = 10;
blocksize = 128;
readsize = 256;
;
memory "lock"
size = 1;
read = "0 1 0 1 1 0 0 0 0 0 0 0 0 0 0 0",
"x x x x x x x x x x o o o o o o";
write = "1 0 1 0 1 1 0 0 1 1 1 0 0 0 0 0",
"0 0 0 0 0 0 0 0 1 1 i i i i i i";
min_write_delay = 9000;
max_write_delay = 9000;
;
memory "lfuse"
size = 1;
read = "0 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0",
"0 0 0 0 0 0 0 0 o o o o o o o o";
write = "1 0 1 0 1 1 0 0 1 0 1 0 0 0 0 0",
"0 0 0 0 0 0 0 0 i i i i i i i i";
min_write_delay = 9000;
max_write_delay = 9000;
;
memory "hfuse"
size = 1;
read = "0 1 0 1 1 0 0 0 0 0 0 0 1 0 0 0",
"0 0 0 0 0 0 0 0 o o o o o o o o";
write = "1 0 1 0 1 1 0 0 1 0 1 0 1 0 0 0",
"0 0 0 0 0 0 0 0 i i i i i i i i";
min_write_delay = 9000;
max_write_delay = 9000;
;
memory "efuse"
size = 1;
read = "0 1 0 1 0 0 0 0 0 0 0 0 1 0 0 0",
"0 0 0 0 0 0 0 0 o o o o o o o o";
write = "1 0 1 0 1 1 0 0 1 0 1 0 0 1 0 0",
"0 0 0 0 0 0 0 0 1 1 1 1 1 i i i";
min_write_delay = 9000;
max_write_delay = 9000;
;
memory "signature"
size = 3;
read = "0 0 1 1 0 0 0 0 0 0 0 0 0 0 0 0",
"0 0 0 0 0 0 a1 a0 o o o o o o o o";
;
memory "calibration"
size = 1;
read = "0 0 1 1 1 0 0 0 0 0 0 0 0 0 0 0",
"0 0 0 0 0 0 0 0 o o o o o o o o";
;
;
#------------------------------------------------------------
# ATmega645
#------------------------------------------------------------
part
id = "m645";
desc = "ATmega645";
signature = 0x1E 0x96 0x05;
has_jtag = yes;
# stk500_devcode = 0x??; # No STK500v1 support?
# avr910_devcode = 0x??; # Try the ATmega16 one
avr910_devcode = 0x74;
pagel = 0xd7;
bs2 = 0xa0;
chip_erase_delay = 9000;
pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1",
"0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0";
chip_erase = "1 0 1 0 1 1 0 0 1 0 0 0 0 0 0 0",
"0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0";
timeout = 200;
stabdelay = 100;
cmdexedelay = 25;
synchloops = 32;
bytedelay = 0;
pollindex = 3;
pollvalue = 0x53;
predelay = 1;
postdelay = 1;
pollmethod = 1;
pp_controlstack =
0x0E, 0x1E, 0x0F, 0x1F, 0x2E, 0x3E, 0x2F, 0x3F,
0x4E, 0x5E, 0x4F, 0x5F, 0x6E, 0x7E, 0x6F, 0x7F,
0x66, 0x76, 0x67, 0x77, 0x6A, 0x7A, 0x6B, 0x7B,
0xBE, 0xFD, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00;
hventerstabdelay = 100;
progmodedelay = 0;
latchcycles = 5;
togglevtg = 1;
poweroffdelay = 15;
resetdelayms = 1;
resetdelayus = 0;
hvleavestabdelay = 15;
chiperasepulsewidth = 0;
chiperasepolltimeout = 10;
programfusepulsewidth = 0;
programfusepolltimeout = 5;
programlockpulsewidth = 0;
programlockpolltimeout = 5;
idr = 0x31;
spmcr = 0x57;
allowfullpagebitstream = no;
ocdrev = 3;
memory "eeprom"
paged = no; /* leave this "no" */
page_size = 8; /* for parallel programming */
size = 2048;
min_write_delay = 9000;
max_write_delay = 9000;
readback_p1 = 0xff;
readback_p2 = 0xff;
read = " 1 0 1 0 0 0 0 0",
" 0 0 0 0 0 a10 a9 a8",
" a7 a6 a5 a4 a3 a2 a1 a0",
" o o o o o o o o";
write = " 1 1 0 0 0 0 0 0",
" 0 0 0 0 0 a10 a9 a8",
" a7 a6 a5 a4 a3 a2 a1 a0",
" i i i i i i i i";
loadpage_lo = " 1 1 0 0 0 0 0 1",
" 0 0 0 0 0 0 0 0",
" 0 0 0 0 0 a2 a1 a0",
" i i i i i i i i";
writepage = " 1 1 0 0 0 0 1 0",
" 0 0 0 0 0 a10 a9 a8",
" a7 a6 a5 a4 a3 0 0 0",
" x x x x x x x x";
mode = 0x41;
delay = 10;
blocksize = 8;
readsize = 256;
;
memory "flash"
paged = yes;
size = 65536;
page_size = 256;
num_pages = 256;
min_write_delay = 4500;
max_write_delay = 4500;
readback_p1 = 0xff;
readback_p2 = 0xff;
read_lo = " 0 0 1 0 0 0 0 0",
" a15 a14 a13 a12 a11 a10 a9 a8",
" a7 a6 a5 a4 a3 a2 a1 a0",
" o o o o o o o o";
read_hi = " 0 0 1 0 1 0 0 0",
" a15 a14 a13 a12 a11 a10 a9 a8",
" a7 a6 a5 a4 a3 a2 a1 a0",
" o o o o o o o o";
loadpage_lo = " 0 1 0 0 0 0 0 0",
" 0 0 0 0 0 0 0 0",
" a7 a6 a5 a4 a3 a2 a1 a0",
" i i i i i i i i";
loadpage_hi = " 0 1 0 0 1 0 0 0",
" 0 0 0 0 0 0 0 0",
" a7 a6 a5 a4 a3 a2 a1 a0",
" i i i i i i i i";
writepage = " 0 1 0 0 1 1 0 0",
" a15 a14 a13 a12 a11 a10 a9 a8",
" a7 a6 a5 a4 a3 a2 a1 a0",
" 0 0 0 0 0 0 0 0";
mode = 0x41;
delay = 10;
blocksize = 128;
readsize = 256;
;
memory "lock"
size = 1;
read = "0 1 0 1 1 0 0 0 0 0 0 0 0 0 0 0",
"x x x x x x x x x x o o o o o o";
write = "1 0 1 0 1 1 0 0 1 1 1 0 0 0 0 0",
"0 0 0 0 0 0 0 0 1 1 i i i i i i";
min_write_delay = 9000;
max_write_delay = 9000;
;
memory "lfuse"
size = 1;
read = "0 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0",
"0 0 0 0 0 0 0 0 o o o o o o o o";
write = "1 0 1 0 1 1 0 0 1 0 1 0 0 0 0 0",
"0 0 0 0 0 0 0 0 i i i i i i i i";
min_write_delay = 9000;
max_write_delay = 9000;
;
memory "hfuse"
size = 1;
read = "0 1 0 1 1 0 0 0 0 0 0 0 1 0 0 0",
"0 0 0 0 0 0 0 0 o o o o o o o o";
write = "1 0 1 0 1 1 0 0 1 0 1 0 1 0 0 0",
"0 0 0 0 0 0 0 0 i i i i i i i i";
min_write_delay = 9000;
max_write_delay = 9000;
;
memory "efuse"
size = 1;
read = "0 1 0 1 0 0 0 0 0 0 0 0 1 0 0 0",
"0 0 0 0 0 0 0 0 o o o o o o o o";
write = "1 0 1 0 1 1 0 0 1 0 1 0 0 1 0 0",
"0 0 0 0 0 0 0 0 1 1 1 1 1 i i i";
min_write_delay = 9000;
max_write_delay = 9000;
;
memory "signature"
size = 3;
read = "0 0 1 1 0 0 0 0 0 0 0 0 0 0 0 0",
"0 0 0 0 0 0 a1 a0 o o o o o o o o";
;
memory "calibration"
size = 1;
read = "0 0 1 1 1 0 0 0 0 0 0 0 0 0 0 0",
"0 0 0 0 0 0 0 0 o o o o o o o o";
;
;
#------------------------------------------------------------
# ATmega3250
#------------------------------------------------------------
part parent "m325"
id = "m3250";
desc = "ATmega3250";
signature = 0x1E 0x95 0x06;
ocdrev = 3;
;
#------------------------------------------------------------
# ATmega6450
#------------------------------------------------------------
part parent "m645"
id = "m6450";
desc = "ATmega6450";
signature = 0x1E 0x96 0x06;
ocdrev = 3;
;
#------------------------------------------------------------
# AVR XMEGA family common values
#------------------------------------------------------------
part
id = ".xmega";
desc = "AVR XMEGA family common values";
has_pdi = yes;
nvm_base = 0x01c0;
mcu_base = 0x0090;
memory "signature"
size = 3;
offset = 0x1000090;
;
memory "prodsig"
size = 0x32;
offset = 0x8e0200;
page_size = 0x32;
readsize = 0x32;
;
memory "fuse1"
size = 1;
offset = 0x8f0021;
;
memory "fuse2"
size = 1;
offset = 0x8f0022;
;
memory "fuse4"
size = 1;
offset = 0x8f0024;
;
memory "fuse5"
size = 1;
offset = 0x8f0025;
;
memory "lock"
size = 1;
offset = 0x8f0027;
;
memory "data"
# SRAM, only used to supply the offset
offset = 0x1000000;
;
;
#------------------------------------------------------------
# ATxmega16A4U
#------------------------------------------------------------
part parent ".xmega"
id = "x16a4u";
desc = "ATxmega16A4U";
signature = 0x1e 0x94 0x41;
usbpid = 0x2fe3;
memory "eeprom"
size = 0x400;
offset = 0x8c0000;
page_size = 0x20;
readsize = 0x100;
;
memory "application"
size = 0x4000;
offset = 0x800000;
page_size = 0x100;
readsize = 0x100;
;
memory "apptable"
size = 0x1000;
offset = 0x803000;
page_size = 0x100;
readsize = 0x100;
;
memory "boot"
size = 0x1000;
offset = 0x804000;
page_size = 0x100;
readsize = 0x100;
;
memory "flash"
size = 0x5000;
offset = 0x800000;
page_size = 0x100;
readsize = 0x100;
;
memory "usersig"
size = 0x100;
offset = 0x8e0400;
page_size = 0x100;
readsize = 0x100;
;
;
#------------------------------------------------------------
# ATxmega16C4
#------------------------------------------------------------
part parent "x16a4u"
id = "x16c4";
desc = "ATxmega16C4";
signature = 0x1e 0x95 0x44;
;
#------------------------------------------------------------
# ATxmega16D4
#------------------------------------------------------------
part parent "x16a4u"
id = "x16d4";
desc = "ATxmega16D4";
signature = 0x1e 0x94 0x42;
;
#------------------------------------------------------------
# ATxmega16A4
#------------------------------------------------------------
part parent "x16a4u"
id = "x16a4";
desc = "ATxmega16A4";
signature = 0x1e 0x94 0x41;
has_jtag = yes;
memory "fuse0"
size = 1;
offset = 0x8f0020;
;
;
#------------------------------------------------------------
# ATxmega32A4U
#------------------------------------------------------------
part parent ".xmega"
id = "x32a4u";
desc = "ATxmega32A4U";
signature = 0x1e 0x95 0x41;
usbpid = 0x2fe4;
memory "eeprom"
size = 0x400;
offset = 0x8c0000;
page_size = 0x20;
readsize = 0x100;
;
memory "application"
size = 0x8000;
offset = 0x800000;
page_size = 0x100;
readsize = 0x100;
;
memory "apptable"
size = 0x1000;
offset = 0x807000;
page_size = 0x100;
readsize = 0x100;
;
memory "boot"
size = 0x1000;
offset = 0x808000;
page_size = 0x100;
readsize = 0x100;
;
memory "flash"
size = 0x9000;
offset = 0x800000;
page_size = 0x100;
readsize = 0x100;
;
memory "usersig"
size = 0x100;
offset = 0x8e0400;
page_size = 0x100;
readsize = 0x100;
;
;
#------------------------------------------------------------
# ATxmega32C4
#------------------------------------------------------------
part parent "x32a4u"
id = "x32c4";
desc = "ATxmega32C4";
signature = 0x1e 0x94 0x43;
;
#------------------------------------------------------------
# ATxmega32D4
#------------------------------------------------------------
part parent "x32a4u"
id = "x32d4";
desc = "ATxmega32D4";
signature = 0x1e 0x95 0x42;
;
#------------------------------------------------------------
# ATxmega32A4
#------------------------------------------------------------
part parent "x32a4u"
id = "x32a4";
desc = "ATxmega32A4";
signature = 0x1e 0x95 0x41;
has_jtag = yes;
memory "fuse0"
size = 1;
offset = 0x8f0020;
;
;
#------------------------------------------------------------
# ATxmega64A4U
#------------------------------------------------------------
part parent ".xmega"
id = "x64a4u";
desc = "ATxmega64A4U";
signature = 0x1e 0x96 0x46;
usbpid = 0x2fe5;
memory "eeprom"
size = 0x800;
offset = 0x8c0000;
page_size = 0x20;
readsize = 0x100;
;
memory "application"
size = 0x10000;
offset = 0x800000;
page_size = 0x100;
readsize = 0x100;
;
memory "apptable"
size = 0x1000;
offset = 0x80f000;
page_size = 0x100;
readsize = 0x100;
;
memory "boot"
size = 0x1000;
offset = 0x810000;
page_size = 0x100;
readsize = 0x100;
;
memory "flash"
size = 0x11000;
offset = 0x800000;
page_size = 0x100;
readsize = 0x100;
;
memory "usersig"
size = 0x100;
offset = 0x8e0400;
page_size = 0x100;
readsize = 0x100;
;
;
#------------------------------------------------------------
# ATxmega64C3
#------------------------------------------------------------
part parent "x64a4u"
id = "x64c3";
desc = "ATxmega64C3";
signature = 0x1e 0x96 0x49;
usbpid = 0x2fd6;
;
#------------------------------------------------------------
# ATxmega64D3
#------------------------------------------------------------
part parent "x64a4u"
id = "x64d3";
desc = "ATxmega64D3";
signature = 0x1e 0x96 0x4a;
;
#------------------------------------------------------------
# ATxmega64D4
#------------------------------------------------------------
part parent "x64a4u"
id = "x64d4";
desc = "ATxmega64D4";
signature = 0x1e 0x96 0x47;
;
#------------------------------------------------------------
# ATxmega64A1
#------------------------------------------------------------
part parent "x64a4u"
id = "x64a1";
desc = "ATxmega64A1";
signature = 0x1e 0x96 0x4e;
has_jtag = yes;
memory "fuse0"
size = 1;
offset = 0x8f0020;
;
;
#------------------------------------------------------------
# ATxmega64A1U
#------------------------------------------------------------
part parent "x64a1"
id = "x64a1u";
desc = "ATxmega64A1U";
signature = 0x1e 0x96 0x4e;
usbpid = 0x2fe8;
;
#------------------------------------------------------------
# ATxmega64A3
#------------------------------------------------------------
part parent "x64a1"
id = "x64a3";
desc = "ATxmega64A3";
signature = 0x1e 0x96 0x42;
;
#------------------------------------------------------------
# ATxmega64A3U
#------------------------------------------------------------
part parent "x64a1"
id = "x64a3u";
desc = "ATxmega64A3U";
signature = 0x1e 0x96 0x42;
usbpid = 0x2fe5;
;
#------------------------------------------------------------
# ATxmega64A4
#------------------------------------------------------------
part parent "x64a1"
id = "x64a4";
desc = "ATxmega64A4";
signature = 0x1e 0x96 0x46;
;
#------------------------------------------------------------
# ATxmega64B1
#------------------------------------------------------------
part parent "x64a1"
id = "x64b1";
desc = "ATxmega64B1";
signature = 0x1e 0x96 0x52;
usbpid = 0x2fe1;
;
#------------------------------------------------------------
# ATxmega64B3
#------------------------------------------------------------
part parent "x64a1"
id = "x64b3";
desc = "ATxmega64B3";
signature = 0x1e 0x96 0x51;
usbpid = 0x2fdf;
;
#------------------------------------------------------------
# ATxmega128C3
#------------------------------------------------------------
part parent ".xmega"
id = "x128c3";
desc = "ATxmega128C3";
signature = 0x1e 0x97 0x52;
usbpid = 0x2fd7;
memory "eeprom"
size = 0x800;
offset = 0x8c0000;
page_size = 0x20;
readsize = 0x100;
;
memory "application"
size = 0x20000;
offset = 0x800000;
page_size = 0x200;
readsize = 0x100;
;
memory "apptable"
size = 0x2000;
offset = 0x81e000;
page_size = 0x200;
readsize = 0x100;
;
memory "boot"
size = 0x2000;
offset = 0x820000;
page_size = 0x200;
readsize = 0x100;
;
memory "flash"
size = 0x22000;
offset = 0x800000;
page_size = 0x200;
readsize = 0x100;
;
memory "usersig"
size = 0x200;
offset = 0x8e0400;
page_size = 0x200;
readsize = 0x100;
;
;
#------------------------------------------------------------
# ATxmega128D3
#------------------------------------------------------------
part parent "x128c3"
id = "x128d3";
desc = "ATxmega128D3";
signature = 0x1e 0x97 0x48;
;
#------------------------------------------------------------
# ATxmega128D4
#------------------------------------------------------------
part parent "x128c3"
id = "x128d4";
desc = "ATxmega128D4";
signature = 0x1e 0x97 0x47;
;
#------------------------------------------------------------
# ATxmega128A1
#------------------------------------------------------------
part parent "x128c3"
id = "x128a1";
desc = "ATxmega128A1";
signature = 0x1e 0x97 0x4c;
has_jtag = yes;
memory "fuse0"
size = 1;
offset = 0x8f0020;
;
;
#------------------------------------------------------------
# ATxmega128A1 revision D
#------------------------------------------------------------
part parent "x128a1"
id = "x128a1d";
desc = "ATxmega128A1revD";
signature = 0x1e 0x97 0x41;
;
#------------------------------------------------------------
# ATxmega128A1U
#------------------------------------------------------------
part parent "x128a1"
id = "x128a1u";
desc = "ATxmega128A1U";
signature = 0x1e 0x97 0x4c;
usbpid = 0x2fed;
;
#------------------------------------------------------------
# ATxmega128A3
#------------------------------------------------------------
part parent "x128a1"
id = "x128a3";
desc = "ATxmega128A3";
signature = 0x1e 0x97 0x42;
;
#------------------------------------------------------------
# ATxmega128A3U
#------------------------------------------------------------
part parent "x128a1"
id = "x128a3u";
desc = "ATxmega128A3U";
signature = 0x1e 0x97 0x42;
usbpid = 0x2fe6;
;
#------------------------------------------------------------
# ATxmega128A4
#------------------------------------------------------------
part parent ".xmega"
id = "x128a4";
desc = "ATxmega128A4";
signature = 0x1e 0x97 0x46;
has_jtag = yes;
memory "eeprom"
size = 0x800;
offset = 0x8c0000;
page_size = 0x20;
readsize = 0x100;
;
memory "application"
size = 0x20000;
offset = 0x800000;
page_size = 0x200;
readsize = 0x100;
;
memory "apptable"
size = 0x1000;
offset = 0x81f000;
page_size = 0x200;
readsize = 0x100;
;
memory "boot"
size = 0x2000;
offset = 0x820000;
page_size = 0x200;
readsize = 0x100;
;
memory "flash"
size = 0x22000;
offset = 0x800000;
page_size = 0x200;
readsize = 0x100;
;
memory "usersig"
size = 0x200;
offset = 0x8e0400;
page_size = 0x200;
readsize = 0x100;
;
memory "fuse0"
size = 1;
offset = 0x8f0020;
;
;
#------------------------------------------------------------
# ATxmega128A4U
#------------------------------------------------------------
part parent ".xmega"
id = "x128a4u";
desc = "ATxmega128A4U";
signature = 0x1e 0x97 0x46;
usbpid = 0x2fde;
memory "eeprom"
size = 0x800;
offset = 0x8c0000;
page_size = 0x20;
readsize = 0x100;
;
memory "application"
size = 0x20000;
offset = 0x800000;
page_size = 0x100;
readsize = 0x100;
;
memory "apptable"
size = 0x1000;
offset = 0x81f000;
page_size = 0x100;
readsize = 0x100;
;
memory "boot"
size = 0x2000;
offset = 0x820000;
page_size = 0x100;
readsize = 0x100;
;
memory "flash"
size = 0x22000;
offset = 0x800000;
page_size = 0x100;
readsize = 0x100;
;
memory "usersig"
size = 0x100;
offset = 0x8e0400;
page_size = 0x100;
readsize = 0x100;
;
;
#------------------------------------------------------------
# ATxmega128B1
#------------------------------------------------------------
part parent ".xmega"
id = "x128b1";
desc = "ATxmega128B1";
signature = 0x1e 0x97 0x4d;
usbpid = 0x2fea;
has_jtag = yes;
memory "eeprom"
size = 0x800;
offset = 0x8c0000;
page_size = 0x20;
readsize = 0x100;
;
memory "application"
size = 0x20000;
offset = 0x800000;
page_size = 0x100;
readsize = 0x100;
;
memory "apptable"
size = 0x2000;
offset = 0x81e000;
page_size = 0x100;
readsize = 0x100;
;
memory "boot"
size = 0x2000;
offset = 0x820000;
page_size = 0x100;
readsize = 0x100;
;
memory "flash"
size = 0x22000;
offset = 0x800000;
page_size = 0x100;
readsize = 0x100;
;
memory "usersig"
size = 0x100;
offset = 0x8e0400;
page_size = 0x100;
readsize = 0x100;
;
memory "fuse0"
size = 1;
offset = 0x8f0020;
;
;
#------------------------------------------------------------
# ATxmega128B3
#------------------------------------------------------------
part parent "x128b1"
id = "x128b3";
desc = "ATxmega128B3";
signature = 0x1e 0x97 0x4b;
usbpid = 0x2fe0;
;
#------------------------------------------------------------
# ATxmega192C3
#------------------------------------------------------------
part parent ".xmega"
id = "x192c3";
desc = "ATxmega192C3";
signature = 0x1e 0x97 0x51;
# usbpid = 0x2f??;
memory "eeprom"
size = 0x800;
offset = 0x8c0000;
page_size = 0x20;
readsize = 0x100;
;
memory "application"
size = 0x30000;
offset = 0x800000;
page_size = 0x200;
readsize = 0x100;
;
memory "apptable"
size = 0x2000;
offset = 0x82e000;
page_size = 0x200;
readsize = 0x100;
;
memory "boot"
size = 0x2000;
offset = 0x830000;
page_size = 0x200;
readsize = 0x100;
;
memory "flash"
size = 0x32000;
offset = 0x800000;
page_size = 0x200;
readsize = 0x100;
;
memory "usersig"
size = 0x200;
offset = 0x8e0400;
page_size = 0x200;
readsize = 0x100;
;
;
#------------------------------------------------------------
# ATxmega192D3
#------------------------------------------------------------
part parent "x192c3"
id = "x192d3";
desc = "ATxmega192D3";
signature = 0x1e 0x97 0x49;
;
#------------------------------------------------------------
# ATxmega192A1
#------------------------------------------------------------
part parent "x192c3"
id = "x192a1";
desc = "ATxmega192A1";
signature = 0x1e 0x97 0x4e;
has_jtag = yes;
memory "fuse0"
size = 1;
offset = 0x8f0020;
;
;
#------------------------------------------------------------
# ATxmega192A3
#------------------------------------------------------------
part parent "x192a1"
id = "x192a3";
desc = "ATxmega192A3";
signature = 0x1e 0x97 0x44;
;
#------------------------------------------------------------
# ATxmega192A3U
#------------------------------------------------------------
part parent "x192a1"
id = "x192a3u";
desc = "ATxmega192A3U";
signature = 0x1e 0x97 0x44;
usbpid = 0x2fe7;
;
#------------------------------------------------------------
# ATxmega256C3
#------------------------------------------------------------
part parent ".xmega"
id = "x256c3";
desc = "ATxmega256C3";
signature = 0x1e 0x98 0x46;
usbpid = 0x2fda;
memory "eeprom"
size = 0x1000;
offset = 0x8c0000;
page_size = 0x20;
readsize = 0x100;
;
memory "application"
size = 0x40000;
offset = 0x800000;
page_size = 0x200;
readsize = 0x100;
;
memory "apptable"
size = 0x2000;
offset = 0x83e000;
page_size = 0x200;
readsize = 0x100;
;
memory "boot"
size = 0x2000;
offset = 0x840000;
page_size = 0x200;
readsize = 0x100;
;
memory "flash"
size = 0x42000;
offset = 0x800000;
page_size = 0x200;
readsize = 0x100;
;
memory "usersig"
size = 0x200;
offset = 0x8e0400;
page_size = 0x200;
readsize = 0x100;
;
;
#------------------------------------------------------------
# ATxmega256D3
#------------------------------------------------------------
part parent "x256c3"
id = "x256d3";
desc = "ATxmega256D3";
signature = 0x1e 0x98 0x44;
;
#------------------------------------------------------------
# ATxmega256A1
#------------------------------------------------------------
part parent "x256c3"
id = "x256a1";
desc = "ATxmega256A1";
signature = 0x1e 0x98 0x46;
has_jtag = yes;
memory "fuse0"
size = 1;
offset = 0x8f0020;
;
;
#------------------------------------------------------------
# ATxmega256A3
#------------------------------------------------------------
part parent "x256a1"
id = "x256a3";
desc = "ATxmega256A3";
signature = 0x1e 0x98 0x42;
;
#------------------------------------------------------------
# ATxmega256A3U
#------------------------------------------------------------
part parent "x256a1"
id = "x256a3u";
desc = "ATxmega256A3U";
signature = 0x1e 0x98 0x42;
usbpid = 0x2fec;
;
#------------------------------------------------------------
# ATxmega256A3B
#------------------------------------------------------------
part parent "x256a1"
id = "x256a3b";
desc = "ATxmega256A3B";
signature = 0x1e 0x98 0x43;
;
#------------------------------------------------------------
# ATxmega256A3BU
#------------------------------------------------------------
part parent "x256a1"
id = "x256a3bu";
desc = "ATxmega256A3BU";
signature = 0x1e 0x98 0x43;
usbpid = 0x2fe2;
;
#------------------------------------------------------------
# ATxmega384C3
#------------------------------------------------------------
part parent ".xmega"
id = "x384c3";
desc = "ATxmega384C3";
signature = 0x1e 0x98 0x45;
usbpid = 0x2fdb;
memory "eeprom"
size = 0x1000;
offset = 0x8c0000;
page_size = 0x20;
readsize = 0x100;
;
memory "application"
size = 0x60000;
offset = 0x800000;
page_size = 0x200;
readsize = 0x100;
;
memory "apptable"
size = 0x2000;
offset = 0x85e000;
page_size = 0x200;
readsize = 0x100;
;
memory "boot"
size = 0x2000;
offset = 0x860000;
page_size = 0x200;
readsize = 0x100;
;
memory "flash"
size = 0x62000;
offset = 0x800000;
page_size = 0x200;
readsize = 0x100;
;
memory "usersig"
size = 0x200;
offset = 0x8e0400;
page_size = 0x200;
readsize = 0x100;
;
;
#------------------------------------------------------------
# ATxmega384D3
#------------------------------------------------------------
part parent "x384c3"
id = "x384d3";
desc = "ATxmega384D3";
signature = 0x1e 0x98 0x47;
;
#------------------------------------------------------------
# ATxmega8E5
#------------------------------------------------------------
part parent ".xmega"
id = "x8e5";
desc = "ATxmega8E5";
signature = 0x1e 0x93 0x41;
memory "eeprom"
size = 0x0200;
offset = 0x08c0000;
page_size = 0x20;
readsize = 0x100;
;
memory "application"
size = 0x2000;
offset = 0x0800000;
page_size = 0x80;
readsize = 0x100;
;
memory "apptable"
size = 0x800;
offset = 0x00801800;
page_size = 0x80;
readsize = 0x100;
;
memory "boot"
size = 0x800;
offset = 0x00802000;
page_size = 0x80;
readsize = 0x100;
;
memory "flash"
size = 0x2800;
offset = 0x0800000;
page_size = 0x80;
readsize = 0x100;
;
memory "usersig"
size = 0x80;
offset = 0x8e0400;
page_size = 0x80;
readsize = 0x100;
;
;
#------------------------------------------------------------
# ATxmega16E5
#------------------------------------------------------------
part parent ".xmega"
id = "x16e5";
desc = "ATxmega16E5";
signature = 0x1e 0x94 0x45;
memory "eeprom"
size = 0x0200;
offset = 0x08c0000;
page_size = 0x20;
readsize = 0x100;
;
memory "application"
size = 0x4000;
offset = 0x0800000;
page_size = 0x80;
readsize = 0x100;
;
memory "apptable"
size = 0x1000;
offset = 0x00803000;
page_size = 0x80;
readsize = 0x100;
;
memory "boot"
size = 0x1000;
offset = 0x00804000;
page_size = 0x80;
readsize = 0x100;
;
memory "flash"
size = 0x5000;
offset = 0x0800000;
page_size = 0x80;
readsize = 0x100;
;
memory "usersig"
size = 0x80;
offset = 0x8e0400;
page_size = 0x80;
readsize = 0x100;
;
;
#------------------------------------------------------------
# ATxmega32E5
#------------------------------------------------------------
part parent ".xmega"
id = "x32e5";
desc = "ATxmega32E5";
signature = 0x1e 0x95 0x4c;
memory "eeprom"
size = 0x0400;
offset = 0x08c0000;
page_size = 0x20;
readsize = 0x100;
;
memory "application"
size = 0x8000;
offset = 0x0800000;
page_size = 0x80;
readsize = 0x100;
;
memory "apptable"
size = 0x1000;
offset = 0x00807000;
page_size = 0x80;
readsize = 0x100;
;
memory "boot"
size = 0x1000;
offset = 0x00808000;
page_size = 0x80;
readsize = 0x100;
;
memory "flash"
size = 0x9000;
offset = 0x0800000;
page_size = 0x80;
readsize = 0x100;
;
memory "usersig"
size = 0x80;
offset = 0x8e0400;
page_size = 0x80;
readsize = 0x100;
;
;
#------------------------------------------------------------
# AVR32UC3A0512
#------------------------------------------------------------
part
id = "uc3a0512";
desc = "AT32UC3A0512";
signature = 0xED 0xC0 0x3F;
has_jtag = yes;
is_avr32 = yes;
memory "flash"
paged = yes;
page_size = 512; # bytes
readsize = 512; # bytes
num_pages = 1024; # could be set dynamicly
size = 0x00080000; # could be set dynamicly
offset = 0x80000000;
;
;
part parent "uc3a0512"
id = "ucr2";
desc = "deprecated, use 'uc3a0512'";
;
#------------------------------------------------------------
# ATtiny1634.
#------------------------------------------------------------
part
id = "t1634";
desc = "ATtiny1634";
has_debugwire = yes;
flash_instr = 0xB6, 0x01, 0x11;
eeprom_instr = 0xBD, 0xF2, 0xBD, 0xE1, 0xBB, 0xCF, 0xB4, 0x00,
0xBE, 0x01, 0xB6, 0x01, 0xBC, 0x00, 0xBB, 0xBF,
0x99, 0xF9, 0xBB, 0xAF;
stk500_devcode = 0x86;
# avr910_devcode = 0x;
signature = 0x1e 0x94 0x12;
pagel = 0xB3;
bs2 = 0xB1;
reset = io;
chip_erase_delay = 9000;
pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1",
"x x x x x x x x x x x x x x x x";
chip_erase = "1 0 1 0 1 1 0 0 1 0 0 x x x x x",
"x x x x x x x x x x x x x x x x";
timeout = 200;
stabdelay = 100;
cmdexedelay = 25;
synchloops = 32;
bytedelay = 0;
pollindex = 3;
pollvalue = 0x53;
predelay = 1;
postdelay = 1;
pollmethod = 1;
pp_controlstack =
0x0E, 0x1E, 0x0E, 0x1E, 0x2E, 0x3E, 0x2E, 0x3E,
0x4E, 0x5E, 0x4E, 0x5E, 0x6E, 0x7E, 0x6E, 0x7E,
0x26, 0x36, 0x66, 0x76, 0x2A, 0x3A, 0x6A, 0x7A,
0x2E, 0xFD, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00;
hventerstabdelay = 100;
progmodedelay = 0;
latchcycles = 0;
togglevtg = 1;
poweroffdelay = 15;
resetdelayms = 1;
resetdelayus = 0;
hvleavestabdelay = 15;
resetdelay = 15;
chiperasepulsewidth = 0;
chiperasepolltimeout = 10;
programfusepulsewidth = 0;
programfusepolltimeout = 5;
programlockpulsewidth = 0;
programlockpolltimeout = 5;
memory "eeprom"
paged = no;
page_size = 4;
size = 256;
min_write_delay = 3600;
max_write_delay = 3600;
readback_p1 = 0xff;
readback_p2 = 0xff;
read = " 1 0 1 0 0 0 0 0",
" 0 0 0 x x x x a8",
" a7 a6 a5 a4 a3 a2 a1 a0",
" o o o o o o o o";
write = " 1 1 0 0 0 0 0 0",
" 0 0 0 x x x x a8",
" a7 a6 a5 a4 a3 a2 a1 a0",
" i i i i i i i i";
loadpage_lo = " 1 1 0 0 0 0 0 1",
" 0 0 0 0 0 0 0 0",
" 0 0 0 0 0 0 a1 a0",
" i i i i i i i i";
writepage = " 1 1 0 0 0 0 1 0",
" 0 0 x x x x x a8",
" a7 a6 a5 a4 a3 a2 0 0",
" x x x x x x x x";
mode = 0x41;
delay = 5;
blocksize = 4;
readsize = 256;
;
memory "flash"
paged = yes;
size = 16384;
page_size = 32;
num_pages = 512;
min_write_delay = 4500;
max_write_delay = 4500;
readback_p1 = 0xff;
readback_p2 = 0xff;
read_lo = " 0 0 1 0 0 0 0 0",
" 0 0 0 a12 a11 a10 a9 a8",
" a7 a6 a5 a4 a3 a2 a1 a0",
" o o o o o o o o";
read_hi = " 0 0 1 0 1 0 0 0",
" 0 0 0 a12 a11 a10 a9 a8",
" a7 a6 a5 a4 a3 a2 a1 a0",
" o o o o o o o o";
loadpage_lo = " 0 1 0 0 0 0 0 0",
" 0 0 0 x x x x x",
" x x a5 a4 a3 a2 a1 a0",
" i i i i i i i i";
loadpage_hi = " 0 1 0 0 1 0 0 0",
" 0 0 0 x x x x x",
" x x a5 a4 a3 a2 a1 a0",
" i i i i i i i i";
writepage = " 0 1 0 0 1 1 0 0",
" 0 0 0 a12 a11 a10 a9 a8",
" a7 a6 x x x x x x",
" x x x x x x x x";
mode = 0x41;
delay = 6;
blocksize = 128;
readsize = 256;
;
memory "lfuse"
size = 1;
min_write_delay = 4500;
max_write_delay = 4500;
read = "0 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0",
"x x x x x x x x o o o o o o o o";
write = "1 0 1 0 1 1 0 0 1 0 1 0 0 0 0 0",
"x x x x x x x x i i i i i i i i";
;
memory "hfuse"
size = 1;
min_write_delay = 4500;
max_write_delay = 4500;
read = "0 1 0 1 1 0 0 0 0 0 0 0 1 0 0 0",
"x x x x x x x x o o o o o o o o";
write = "1 0 1 0 1 1 0 0 1 0 1 0 1 0 0 0",
"x x x x x x x x i i i i i i i i";
;
memory "efuse"
size = 1;
min_write_delay = 4500;
max_write_delay = 4500;
read = "0 1 0 1 0 0 0 0 0 0 0 0 1 0 0 0",
"x x x x x x x x x x x o o o o o";
write = "1 0 1 0 1 1 0 0 1 0 1 0 0 1 0 0",
"x x x x x x x x x x x i i i i i";
;
memory "lock"
size = 1;
min_write_delay = 4500;
max_write_delay = 4500;
read = "0 1 0 1 1 0 0 0 0 0 0 0 0 0 0 0",
"x x x x x x x x x x x x x x o o";
write = "1 0 1 0 1 1 0 0 1 1 1 x x x x x",
"x x x x x x x x 1 1 1 1 1 1 i i";
;
memory "calibration"
size = 1;
read = "0 0 1 1 1 0 0 0 0 0 0 x x x x x",
"0 0 0 0 0 0 0 0 o o o o o o o o";
;
memory "signature"
size = 3;
read = "0 0 1 1 0 0 0 0 0 0 0 x x x x x",
"x x x x x x a1 a0 o o o o o o o o";
;
;
#------------------------------------------------------------
# Common values for reduced core tinys (4/5/9/10/20/40)
#------------------------------------------------------------
part
id = ".reduced_core_tiny";
desc = "Common values for reduced core tinys";
has_tpi = yes;
memory "signature"
size = 3;
offset = 0x3fc0;
page_size = 16;
;
memory "fuse"
size = 1;
offset = 0x3f40;
page_size = 16;
blocksize = 4;
;
memory "calibration"
size = 1;
offset = 0x3f80;
page_size = 16;
;
memory "lockbits"
size = 1;
offset = 0x3f00;
page_size = 16;
;
;
#------------------------------------------------------------
# ATtiny4
#------------------------------------------------------------
part parent ".reduced_core_tiny"
id = "t4";
desc = "ATtiny4";
signature = 0x1e 0x8f 0x0a;
memory "flash"
size = 512;
offset = 0x4000;
page_size = 16;
blocksize = 128;
;
;
#------------------------------------------------------------
# ATtiny5
#------------------------------------------------------------
part parent "t4"
id = "t5";
desc = "ATtiny5";
signature = 0x1e 0x8f 0x09;
;
#------------------------------------------------------------
# ATtiny9
#------------------------------------------------------------
part parent ".reduced_core_tiny"
id = "t9";
desc = "ATtiny9";
signature = 0x1e 0x90 0x08;
memory "flash"
size = 1024;
offset = 0x4000;
page_size = 16;
blocksize = 128;
;
;
#------------------------------------------------------------
# ATtiny10
#------------------------------------------------------------
part parent "t9"
id = "t10";
desc = "ATtiny10";
signature = 0x1e 0x90 0x03;
;
#------------------------------------------------------------
# ATtiny20
#------------------------------------------------------------
part parent ".reduced_core_tiny"
id = "t20";
desc = "ATtiny20";
signature = 0x1e 0x91 0x0F;
memory "flash"
size = 2048;
offset = 0x4000;
page_size = 16;
blocksize = 128;
;
;
#------------------------------------------------------------
# ATtiny40
#------------------------------------------------------------
part parent ".reduced_core_tiny"
id = "t40";
desc = "ATtiny40";
signature = 0x1e 0x92 0x0E;
memory "flash"
size = 4096;
offset = 0x4000;
page_size = 64;
blocksize = 128;
;
;
#------------------------------------------------------------
# ATmega406
#------------------------------------------------------------
part
id = "m406";
desc = "ATMEGA406";
has_jtag = yes;
signature = 0x1e 0x95 0x07;
# STK500 parameters (parallel programming IO lines)
pagel = 0xa7;
bs2 = 0xa0;
serial = no;
parallel = yes;
# STK500v2 HV programming parameters, from XML
pp_controlstack = 0x0e, 0x1e, 0x0f, 0x1f, 0x2e, 0x3e, 0x2f, 0x3f,
0x4e, 0x5e, 0x4f, 0x5f, 0x6e, 0x7e, 0x6f, 0x7f,
0x66, 0x76, 0x67, 0x77, 0x6a, 0x7a, 0x6b, 0x7b,
0xbe, 0xfd, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00;
# JTAG ICE mkII parameters, also from XML files
allowfullpagebitstream = no;
enablepageprogramming = yes;
idr = 0x51;
rampz = 0x00;
spmcr = 0x57;
eecr = 0x3f;
memory "eeprom"
paged = no;
size = 512;
page_size = 4;
blocksize = 4;
readsize = 4;
num_pages = 128;
;
memory "flash"
paged = yes;
size = 40960;
page_size = 128;
blocksize = 128;
readsize = 128;
num_pages = 320;
;
memory "hfuse"
size = 1;
;
memory "lfuse"
size = 1;
;
memory "lockbits"
size = 1;
;
memory "signature"
size = 3;
;
;