rixty
/
OpenVoiceOS
mirror of https://github.com/OpenVoiceOS/OpenVoiceOS
1
1
Fork 0
Code Issues Releases Wiki Activity
OpenVoiceOS/buildroot-external/patches/linux/0083-serial-core-Use-port-l...

373 lines
13 KiB
Diff
Raw Blame History

From 1d1af26137b4e240e05f8da2a093bb74708411af Mon Sep 17 00:00:00 2001
From: Thomas Gleixner <tglx@linutronix.de>
Date: Thu, 14 Sep 2023 20:44:14 +0206
Subject: [PATCH 083/198] serial: core: Use port lock wrappers
When a serial port is used for kernel console output, then all
modifications to the UART registers which are done from other contexts,
e.g. getty, termios, are interference points for the kernel console.
So far this has been ignored and the printk output is based on the
principle of hope. The rework of the console infrastructure which aims to
support threaded and atomic consoles, requires to mark sections which
modify the UART registers as unsafe. This allows the atomic write function
to make informed decisions and eventually to restore operational state. It
also allows to prevent the regular UART code from modifying UART registers
while printk output is in progress.
All modifications of UART registers are guarded by the UART port lock,
which provides an obvious synchronization point with the console
infrastructure.
To avoid adding this functionality to all UART drivers, wrap the
spin_[un]lock*() invocations for uart_port::lock into helper functions
which just contain the spin_[un]lock*() invocations for now. In a
subsequent step these helpers will gain the console synchronization
mechanisms.
Converted with coccinelle. No functional change.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: John Ogness <john.ogness@linutronix.de>
Link: https://lore.kernel.org/r/20230914183831.587273-58-john.ogness@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
---
drivers/tty/serial/serial_core.c | 92 ++++++++++++++++----------------
drivers/tty/serial/serial_port.c | 4 +-
2 files changed, 48 insertions(+), 48 deletions(-)
diff --git a/drivers/tty/serial/serial_core.c b/drivers/tty/serial/serial_core.c
index 4c81210ad9b3..fc59ba702752 100644
--- a/drivers/tty/serial/serial_core.c
+++ b/drivers/tty/serial/serial_core.c
@@ -79,7 +79,7 @@ static inline void uart_port_deref(struct uart_port *uport)
({ \
struct uart_port *__uport = uart_port_ref(state); \
if (__uport) \
- spin_lock_irqsave(&__uport->lock, flags); \
+ uart_port_lock_irqsave(__uport, &flags); \
__uport; \
})
@@ -87,7 +87,7 @@ static inline void uart_port_deref(struct uart_port *uport)
({ \
struct uart_port *__uport = uport; \
if (__uport) { \
- spin_unlock_irqrestore(&__uport->lock, flags); \
+ uart_port_unlock_irqrestore(__uport, flags); \
uart_port_deref(__uport); \
} \
})
@@ -179,12 +179,12 @@ uart_update_mctrl(struct uart_port *port, unsigned int set, unsigned int clear)
unsigned long flags;
unsigned int old;
- spin_lock_irqsave(&port->lock, flags);
+ uart_port_lock_irqsave(port, &flags);
old = port->mctrl;
port->mctrl = (old & ~clear) | set;
if (old != port->mctrl && !(port->rs485.flags & SER_RS485_ENABLED))
port->ops->set_mctrl(port, port->mctrl);
- spin_unlock_irqrestore(&port->lock, flags);
+ uart_port_unlock_irqrestore(port, flags);
}
#define uart_set_mctrl(port, set) uart_update_mctrl(port, set, 0)
@@ -219,7 +219,7 @@ static void uart_change_line_settings(struct tty_struct *tty, struct uart_state
/*
* Set modem status enables based on termios cflag
*/
- spin_lock_irq(&uport->lock);
+ uart_port_lock_irq(uport);
if (termios->c_cflag & CRTSCTS)
uport->status |= UPSTAT_CTS_ENABLE;
else
@@ -240,7 +240,7 @@ static void uart_change_line_settings(struct tty_struct *tty, struct uart_state
else
__uart_start(state);
}
- spin_unlock_irq(&uport->lock);
+ uart_port_unlock_irq(uport);
}
/*
@@ -702,11 +702,11 @@ static void uart_send_xchar(struct tty_struct *tty, char ch)
if (port->ops->send_xchar)
port->ops->send_xchar(port, ch);
else {
- spin_lock_irqsave(&port->lock, flags);
+ uart_port_lock_irqsave(port, &flags);
port->x_char = ch;
if (ch)
port->ops->start_tx(port);
- spin_unlock_irqrestore(&port->lock, flags);
+ uart_port_unlock_irqrestore(port, flags);
}
uart_port_deref(port);
}
@@ -1085,9 +1085,9 @@ static int uart_tiocmget(struct tty_struct *tty)
if (!tty_io_error(tty)) {
result = uport->mctrl;
- spin_lock_irq(&uport->lock);
+ uart_port_lock_irq(uport);
result |= uport->ops->get_mctrl(uport);
- spin_unlock_irq(&uport->lock);
+ uart_port_unlock_irq(uport);
}
out:
mutex_unlock(&port->mutex);
@@ -1223,16 +1223,16 @@ static int uart_wait_modem_status(struct uart_state *state, unsigned long arg)
uport = uart_port_ref(state);
if (!uport)
return -EIO;
- spin_lock_irq(&uport->lock);
+ uart_port_lock_irq(uport);
memcpy(&cprev, &uport->icount, sizeof(struct uart_icount));
uart_enable_ms(uport);
- spin_unlock_irq(&uport->lock);
+ uart_port_unlock_irq(uport);
add_wait_queue(&port->delta_msr_wait, &wait);
for (;;) {
- spin_lock_irq(&uport->lock);
+ uart_port_lock_irq(uport);
memcpy(&cnow, &uport->icount, sizeof(struct uart_icount));
- spin_unlock_irq(&uport->lock);
+ uart_port_unlock_irq(uport);
set_current_state(TASK_INTERRUPTIBLE);
@@ -1277,9 +1277,9 @@ static int uart_get_icount(struct tty_struct *tty,
uport = uart_port_ref(state);
if (!uport)
return -EIO;
- spin_lock_irq(&uport->lock);
+ uart_port_lock_irq(uport);
memcpy(&cnow, &uport->icount, sizeof(struct uart_icount));
- spin_unlock_irq(&uport->lock);
+ uart_port_unlock_irq(uport);
uart_port_deref(uport);
icount->cts = cnow.cts;
@@ -1432,9 +1432,9 @@ static int uart_rs485_config(struct uart_port *port)
uart_set_rs485_termination(port, rs485);
uart_set_rs485_rx_during_tx(port, rs485);
- spin_lock_irqsave(&port->lock, flags);
+ uart_port_lock_irqsave(port, &flags);
ret = port->rs485_config(port, NULL, rs485);
- spin_unlock_irqrestore(&port->lock, flags);
+ uart_port_unlock_irqrestore(port, flags);
if (ret) {
memset(rs485, 0, sizeof(*rs485));
/* unset GPIOs */
@@ -1451,9 +1451,9 @@ static int uart_get_rs485_config(struct uart_port *port,
unsigned long flags;
struct serial_rs485 aux;
- spin_lock_irqsave(&port->lock, flags);
+ uart_port_lock_irqsave(port, &flags);
aux = port->rs485;
- spin_unlock_irqrestore(&port->lock, flags);
+ uart_port_unlock_irqrestore(port, flags);
if (copy_to_user(rs485, &aux, sizeof(aux)))
return -EFAULT;
@@ -1481,7 +1481,7 @@ static int uart_set_rs485_config(struct tty_struct *tty, struct uart_port *port,
uart_set_rs485_termination(port, &rs485);
uart_set_rs485_rx_during_tx(port, &rs485);
- spin_lock_irqsave(&port->lock, flags);
+ uart_port_lock_irqsave(port, &flags);
ret = port->rs485_config(port, &tty->termios, &rs485);
if (!ret) {
port->rs485 = rs485;
@@ -1490,7 +1490,7 @@ static int uart_set_rs485_config(struct tty_struct *tty, struct uart_port *port,
if (!(rs485.flags & SER_RS485_ENABLED))
port->ops->set_mctrl(port, port->mctrl);
}
- spin_unlock_irqrestore(&port->lock, flags);
+ uart_port_unlock_irqrestore(port, flags);
if (ret) {
/* restore old GPIO settings */
gpiod_set_value_cansleep(port->rs485_term_gpio,
@@ -1515,9 +1515,9 @@ static int uart_get_iso7816_config(struct uart_port *port,
if (!port->iso7816_config)
return -ENOTTY;
- spin_lock_irqsave(&port->lock, flags);
+ uart_port_lock_irqsave(port, &flags);
aux = port->iso7816;
- spin_unlock_irqrestore(&port->lock, flags);
+ uart_port_unlock_irqrestore(port, flags);
if (copy_to_user(iso7816, &aux, sizeof(aux)))
return -EFAULT;
@@ -1546,9 +1546,9 @@ static int uart_set_iso7816_config(struct uart_port *port,
if (iso7816.reserved[i])
return -EINVAL;
- spin_lock_irqsave(&port->lock, flags);
+ uart_port_lock_irqsave(port, &flags);
ret = port->iso7816_config(port, &iso7816);
- spin_unlock_irqrestore(&port->lock, flags);
+ uart_port_unlock_irqrestore(port, flags);
if (ret)
return ret;
@@ -1765,9 +1765,9 @@ static void uart_tty_port_shutdown(struct tty_port *port)
if (WARN(!uport, "detached port still initialized!\n"))
return;
- spin_lock_irq(&uport->lock);
+ uart_port_lock_irq(uport);
uport->ops->stop_rx(uport);
- spin_unlock_irq(&uport->lock);
+ uart_port_unlock_irq(uport);
uart_port_shutdown(port);
@@ -1781,10 +1781,10 @@ static void uart_tty_port_shutdown(struct tty_port *port)
/*
* Free the transmit buffer.
*/
- spin_lock_irq(&uport->lock);
+ uart_port_lock_irq(uport);
buf = state->xmit.buf;
state->xmit.buf = NULL;
- spin_unlock_irq(&uport->lock);
+ uart_port_unlock_irq(uport);
free_page((unsigned long)buf);
@@ -1927,10 +1927,10 @@ static bool uart_carrier_raised(struct tty_port *port)
*/
if (WARN_ON(!uport))
return true;
- spin_lock_irq(&uport->lock);
+ uart_port_lock_irq(uport);
uart_enable_ms(uport);
mctrl = uport->ops->get_mctrl(uport);
- spin_unlock_irq(&uport->lock);
+ uart_port_unlock_irq(uport);
uart_port_deref(uport);
return mctrl & TIOCM_CAR;
@@ -2047,9 +2047,9 @@ static void uart_line_info(struct seq_file *m, struct uart_driver *drv, int i)
pm_state = state->pm_state;
if (pm_state != UART_PM_STATE_ON)
uart_change_pm(state, UART_PM_STATE_ON);
- spin_lock_irq(&uport->lock);
+ uart_port_lock_irq(uport);
status = uport->ops->get_mctrl(uport);
- spin_unlock_irq(&uport->lock);
+ uart_port_unlock_irq(uport);
if (pm_state != UART_PM_STATE_ON)
uart_change_pm(state, pm_state);
@@ -2388,9 +2388,9 @@ int uart_suspend_port(struct uart_driver *drv, struct uart_port *uport)
*/
if (!console_suspend_enabled && uart_console(uport)) {
if (uport->ops->start_rx) {
- spin_lock_irq(&uport->lock);
+ uart_port_lock_irq(uport);
uport->ops->stop_rx(uport);
- spin_unlock_irq(&uport->lock);
+ uart_port_unlock_irq(uport);
}
goto unlock;
}
@@ -2405,7 +2405,7 @@ int uart_suspend_port(struct uart_driver *drv, struct uart_port *uport)
tty_port_set_suspended(port, true);
tty_port_set_initialized(port, false);
- spin_lock_irq(&uport->lock);
+ uart_port_lock_irq(uport);
ops->stop_tx(uport);
if (!(uport->rs485.flags & SER_RS485_ENABLED))
ops->set_mctrl(uport, 0);
@@ -2413,7 +2413,7 @@ int uart_suspend_port(struct uart_driver *drv, struct uart_port *uport)
mctrl = uport->mctrl;
uport->mctrl = 0;
ops->stop_rx(uport);
- spin_unlock_irq(&uport->lock);
+ uart_port_unlock_irq(uport);
/*
* Wait for the transmitter to empty.
@@ -2485,9 +2485,9 @@ int uart_resume_port(struct uart_driver *drv, struct uart_port *uport)
uart_change_pm(state, UART_PM_STATE_ON);
uport->ops->set_termios(uport, &termios, NULL);
if (!console_suspend_enabled && uport->ops->start_rx) {
- spin_lock_irq(&uport->lock);
+ uart_port_lock_irq(uport);
uport->ops->start_rx(uport);
- spin_unlock_irq(&uport->lock);
+ uart_port_unlock_irq(uport);
}
if (console_suspend_enabled)
console_start(uport->cons);
@@ -2498,10 +2498,10 @@ int uart_resume_port(struct uart_driver *drv, struct uart_port *uport)
int ret;
uart_change_pm(state, UART_PM_STATE_ON);
- spin_lock_irq(&uport->lock);
+ uart_port_lock_irq(uport);
if (!(uport->rs485.flags & SER_RS485_ENABLED))
ops->set_mctrl(uport, 0);
- spin_unlock_irq(&uport->lock);
+ uart_port_unlock_irq(uport);
if (console_suspend_enabled || !uart_console(uport)) {
/* Protected by port mutex for now */
struct tty_struct *tty = port->tty;
@@ -2511,11 +2511,11 @@ int uart_resume_port(struct uart_driver *drv, struct uart_port *uport)
if (tty)
uart_change_line_settings(tty, state, NULL);
uart_rs485_config(uport);
- spin_lock_irq(&uport->lock);
+ uart_port_lock_irq(uport);
if (!(uport->rs485.flags & SER_RS485_ENABLED))
ops->set_mctrl(uport, uport->mctrl);
ops->start_tx(uport);
- spin_unlock_irq(&uport->lock);
+ uart_port_unlock_irq(uport);
tty_port_set_initialized(port, true);
} else {
/*
@@ -2627,11 +2627,11 @@ uart_configure_port(struct uart_driver *drv, struct uart_state *state,
* keep the DTR setting that is set in uart_set_options()
* We probably don't need a spinlock around this, but
*/
- spin_lock_irqsave(&port->lock, flags);
+ uart_port_lock_irqsave(port, &flags);
port->mctrl &= TIOCM_DTR;
if (!(port->rs485.flags & SER_RS485_ENABLED))
port->ops->set_mctrl(port, port->mctrl);
- spin_unlock_irqrestore(&port->lock, flags);
+ uart_port_unlock_irqrestore(port, flags);
uart_rs485_config(port);
diff --git a/drivers/tty/serial/serial_port.c b/drivers/tty/serial/serial_port.c
index 0b3cef3c323b..72b6f4f326e2 100644
--- a/drivers/tty/serial/serial_port.c
+++ b/drivers/tty/serial/serial_port.c
@@ -35,10 +35,10 @@ static int serial_port_runtime_resume(struct device *dev)
goto out;
/* Flush any pending TX for the port */
- spin_lock_irqsave(&port->lock, flags);
+ uart_port_lock_irqsave(port, &flags);
if (__serial_port_busy(port))
port->ops->start_tx(port);
- spin_unlock_irqrestore(&port->lock, flags);
+ uart_port_unlock_irqrestore(port, flags);
out:
pm_runtime_mark_last_busy(dev);
--
2.44.0
Reference in New Issue View Git Blame Copy Permalink