2a059a73dc
MycroftOS: Raspberry Pi config.txt order changes
2020-08-31 12:13:32 +02:00
565ea1b00f
Revert "MycroftOS: Build, install and use the dtbo files from the kernel sources."
...
This reverts commit 5a108bea9b
2020-08-31 11:57:09 +02:00
c8877117a3
MycroftOS: Sound tweaks and fixes
2020-08-31 11:56:20 +02:00
ad6133fc35
MycroftOS: Change the kernel module loading order for respeaker as well.
2020-08-30 10:38:11 +02:00
df2ee2d4a5
MycroftOS: (experimental) respeaker 2mic pulseaudio support.
2020-08-27 14:11:58 +02:00
2d0064f08f
MycroftOS: Split vc4 overlay loading for pi3 and pi4
2020-08-21 10:54:32 +02:00
e998a5d76a
MycroftOS: Kernel: Start of own kernel config.
...
(Not used as of yet)
2020-08-04 19:35:51 +02:00
5a108bea9b
MycroftOS: Build, install and use the dtbo files from the kernel sources.
...
Instead of the pre-compiled version from the rpi-firmware repository
this to make sute everything is using the same version.
2020-08-04 18:59:41 +02:00
49da648bcf
MycroftOS: Remove the noswap restriction from cmdline.txt
...
- RPI3 uses all memory because of the GUI video needs 256
- This together with Precise and only 1GB available is tricky
2020-07-24 10:04:21 +02:00
a7c71a0b2b
MycroftOS: use the kms driver instead of the fkms driver.
...
- Need to check if the rpi4 works with this. otherwise a split
in files is needed between the two.
2020-07-23 20:31:10 +02:00
684032413f
MycroftOS: Update genimage-raspberrypi3-64.cfg
2020-07-23 19:50:25 +02:00
2beaab7a25
MycroftOS: Migrating to new wifi-connect system.
2020-07-21 09:24:45 +02:00
f4755b898e
MycroftOS: Fix for new rpi-firmware system (rpi4-64 only for now)
2020-07-20 11:15:34 +02:00
08ac7a72d6
MycroftOS: Remove pip binary-only restriction (for now)
2020-07-18 17:25:32 +02:00
9186fb58fe
MycroftOS: More possible fixes.
2020-06-12 09:43:10 +02:00
0b22ac3f40
MycroftOS: Finish refactoring wifi setup system.
2020-06-09 15:36:30 +02:00
00482f6eed
MycroftOS: Remove ap0 udev rule. We will let systemd handle it.
...
To prevent "resource busy" later on in the boot process.
2020-06-09 13:20:25 +02:00
5a15c0e1b4
Revert "MycroftOS: Asign 256 MB memory CMA split"
...
This fails to properly initiate, however setting the GPU memory to 256
already sets this CMA to 256 by default so not needed.
This reverts commit 4e70d00c91
2020-06-09 12:16:18 +02:00
4e70d00c91
MycroftOS: Asign 256 MB memory CMA split
2020-06-08 12:48:51 +02:00
e0c9ea0c6d
MycroftOS: Increase GPU memory assignment to 256MB
2020-06-08 12:16:36 +02:00
fe07bf5bfb
MycroftOS: Refactoring wifi setup system
2020-05-28 09:12:54 +02:00
4bcd8f632f
MycroftOS: GUI: Enable mesa3d VC4 driver
2020-05-17 17:24:05 +02:00
57a7641a1d
MycroftOS: Change console back to serial
2020-04-19 17:38:47 +02:00
78581cf9ef
MycroftOS: Change console to tty5 and don't show systemd status
...
Basically, sssst to the screen again
2020-04-16 12:29:43 +02:00
c2b6e9c9f0
MycroftOS: Enable Broadcom BCM4343* bluetooth HCI by default
2020-04-16 11:47:58 +02:00
b4050b329e
MycroftOS: Make use of systemd preset files for enabling default services.
2020-04-15 15:43:36 +02:00
54d9d757da
MycroftOS: Bring the other boards inline with the splitted
...
rootfs-overlay directories.
2020-04-12 17:18:33 +02:00
eb1e78b817
MycroftOS: Split rootfs overlay into board specifics folders
2020-04-12 15:35:10 +02:00
47eb787d5c
MycroftOS: Initial start of 64bit for RPI4
2020-04-11 16:23:59 +02:00
8bc3fbea37
MycroftOS: Disabled GPIO IRQ as it does not behave correctly on the kernel.
...
- This solves the hangin of the RPI when initiating the respeaker LED skill
2020-01-21 20:37:12 +01:00
2923aa5be2
MycroftOS: Silence the HDMI screen again.
2019-12-22 12:28:16 +01:00
c24ec5c1b7
MycroftOS: Add RPI4 support.
2019-12-10 11:13:25 +01:00
fad8734ec9
MycroftOS: Small changes to cmdline.txt
2019-11-17 13:08:37 +01:00
3bbdddfa01
MycroftOS: Multiple fixes, tweakes, changes and/or reverts.
...
Basically a bunch of staged stuff of before the upgrade of
buildroot and mycroft. If I remember it all correctly;
- Change the folder permissions setup from device_table to
systemd.
- Remove the mycroft user setup from the mycroft.service
package into a systemwide buildroot user_table.txt
- Fix respeaker stuff for systemd system
- Fix sudo system for the mycroft user
- Allow mycroft to SSH into the system. Disallow root login.
- Probably some other fixes and tweaks I forgot about....
2019-09-09 15:25:51 +02:00
d6379f9f99
MycroftOS: Multiple fixes and tweaks.
...
- install locale binary from glibc into target
- allow mycroft to SSH into the box
- add of sudo command / binary
- folder permission issues
2019-02-06 13:03:03 +01:00
c336a9d9eb
MycroftOS: Enabling the SPI driver for the ReSpeaker HAT Skill
2019-01-31 13:43:50 +01:00
931898a1f9
Linux: Raspberry: Move console to serial port.
...
This to prevent kernel critical messages to be send to HDMI
2018-11-14 19:27:43 +01:00
434204415d
Raspberry: Kernel: Small tweaks to cmdline.txt
2018-11-14 14:44:33 +01:00
aa1d662121
MycroftOS: Buildroot: Multiple changes and fixes
...
- Make sure there is no getty being spawned on TTY1
- Switch from Dropbear to Openssh so we can disable locale being sent over
2018-11-12 13:20:09 +01:00
fcb2dcf244
MycroftOS: Switch to 720p instead
2018-11-09 18:38:51 +01:00
cf65f00aaa
MycroftOS: Boot with HDMI safe mode for older screens compatibility.
2018-11-09 09:52:17 +01:00
0d1ea12fc0
MycroftOS: Show a boot splash as early as possible in the bootproces
...
A clean "empty splash.png at boot however the same fbv code can be
used later on in the develoment and proces to show the user where
in the boot / configuration proces we are at.
- "Connect to wifi SSID" user information for the wifi configuration
- But also possible other cofiguration step later on in the wizard
2018-11-06 13:59:01 +01:00
69521b374f
Buildroot: Initial start of the respeaker package
...
- Download latest code from github
- Compile and install kernel modules
- Init script to load the modules
- Copy over all overlays and configuration files
- Init script to start seeed-voicecard bash script
< ... This now needs testing ... >
2018-11-02 17:07:53 +01:00
55846e484a
MycroftOS: Implementation of a very first initial bootable version
...
- Add Buildroot patches to downgrade / upgrade package dependencies
in line with the Mycroft A.I. software stack requirements.
- Add buildroot additional package dependencies in line with the
Mycroft A.I. software stack requirements.
- Update rpi3 defconfig file.
- Implement initial root_fs overlay filestructure.
- Addition of some quick and dirty helper scripts.
- Update of README to reflect these changes.
2018-10-30 15:55:12 +01:00
b68a2beb9e
MycroftOS: Initial setup for rpi3
2018-10-26 19:51:01 +02:00
j1nx
Peter Steenbergen