MycroftOS: Split rootfs overlay into board specifics folders

buildroot-external/board/raspberrypi/rootfs-overlay/etc/dnsmasq.conf

@@ -0,0 +1,2 @@
+interface=ap0
+address=/#/172.16.127.1

buildroot-external/board/raspberrypi/rootfs-overlay/etc/iptables.rules

@@ -0,0 +1,13 @@
+*nat
+:PREROUTING ACCEPT [14:1672]
+:INPUT ACCEPT [13:1640]
+:OUTPUT ACCEPT [24:1440]
+:POSTROUTING ACCEPT [24:1440]
+-A PREROUTING -p tcp -m tcp --dport 80 -j DNAT --to-destination 172.16.127.1
+-A PREROUTING -p tcp -m tcp --dport 443 -j DNAT --to-destination 172.16.127.1
+COMMIT
+*filter
+:INPUT ACCEPT [60540:12954317]
+:FORWARD ACCEPT [0:0]
+:OUTPUT ACCEPT [56210:7390098]
+COMMIT

buildroot-external/board/raspberrypi/rootfs-overlay/etc/modprobe.d/alsa-base.conf

@@ -0,0 +1,4 @@
+options snd_usb_audio index=0
+options snd_usb_audio ignore_ctl_error=1
+options snd_bcm2835 index=1
+options snd slots=snd_usb_audio,snd_bcm2835

buildroot-external/board/raspberrypi/rootfs-overlay/etc/nginx/nginx.conf

@@ -0,0 +1,28 @@
+
+worker_processes  1;
+
+events {
+        worker_connections  1024;
+}
+
+http {
+    include       mime.types;
+    default_type  application/octet-stream;
+    sendfile        on;
+    keepalive_timeout  65;
+
+    server {
+        listen       80;
+        server_name  MycroftOS;
+        root         /opt/mycroft/wifisetup/templates;
+
+        # For iOS
+        if ($http_user_agent ~* (CaptiveNetworkSupport) ) {
+                return 302 http://172.16.127.1:88/hotspot.html;
+        }
+        # For others
+        location / {
+                return 302 http://172.16.127.1:88/;
+        }
+    }
+}

buildroot-external/board/raspberrypi/rootfs-overlay/etc/pip.conf

@@ -0,0 +1,3 @@
+[global]
+only-binary=:all:
+extra-index-url=https://www.piwheels.org/simple

buildroot-external/board/raspberrypi/rootfs-overlay/etc/pulse/seeed-voicecard-4mic-daemon.conf

@@ -0,0 +1,94 @@
+# This file is part of PulseAudio.
+#
+# PulseAudio is free software; you can redistribute it and/or modify
+# it under the terms of the GNU Lesser General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+#
+# PulseAudio is distributed in the hope that it will be useful, but
+# WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+# General Public License for more details.
+#
+# You should have received a copy of the GNU Lesser General Public License
+# along with PulseAudio; if not, see <http://www.gnu.org/licenses/>.
+
+## Configuration file for the PulseAudio daemon. See pulse-daemon.conf(5) for
+## more information. Default values are commented out.  Use either ; or # for
+## commenting.
+
+; daemonize = no
+; fail = yes
+; allow-module-loading = yes
+; allow-exit = yes
+; use-pid-file = yes
+; system-instance = no
+; local-server-type = user
+; enable-shm = yes
+; enable-memfd = yes
+; shm-size-bytes = 0 # setting this 0 will use the system-default, usually 64 MiB
+; lock-memory = no
+; cpu-limit = no
+
+; high-priority = yes
+; nice-level = -11
+
+; realtime-scheduling = yes
+; realtime-priority = 5
+
+; exit-idle-time = 20
+; scache-idle-time = 20
+
+; dl-search-path = (depends on architecture)
+
+; load-default-script-file = yes
+; default-script-file = /etc/pulse/default.pa
+
+; log-target = auto
+; log-level = notice
+; log-meta = no
+; log-time = no
+; log-backtrace = 0
+
+; resample-method = speex-float-1
+; enable-remixing = yes
+; enable-lfe-remixing = no
+; lfe-crossover-freq = 0
+
+; flat-volumes = yes
+
+; rlimit-fsize = -1
+; rlimit-data = -1
+; rlimit-stack = -1
+; rlimit-core = -1
+; rlimit-as = -1
+; rlimit-rss = -1
+; rlimit-nproc = -1
+; rlimit-nofile = 256
+; rlimit-memlock = -1
+; rlimit-locks = -1
+; rlimit-sigpending = -1
+; rlimit-msgqueue = -1
+; rlimit-nice = 31
+; rlimit-rtprio = 9
+; rlimit-rttime = 200000
+
+; default-sample-format = s16le
+; default-sample-rate = 96000
+; alternate-sample-rate = 48000
+; default-sample-channels = 4
+; default-channel-map = front-left,front-right
+
+; default-fragments = 4
+; default-fragment-size-msec = 25
+
+; enable-deferred-volume = yes
+; deferred-volume-safety-margin-usec = 8000
+; deferred-volume-extra-delay-usec = 0
+
+# MycroftOS Audio Settings
+avoid-resampling = yes
+default-sample-format = s24le
+default-sample-rate = 48000
+alternate-sample-rate = 44100
+default-sample-channels = 4

buildroot-external/board/raspberrypi/rootfs-overlay/etc/pulse/seeed-voicecard-4mic-default.pa

@@ -0,0 +1,153 @@
+#!/usr/bin/pulseaudio -nF
+#
+# This file is part of PulseAudio.
+#
+# PulseAudio is free software; you can redistribute it and/or modify it
+# under the terms of the GNU Lesser General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+#
+# PulseAudio is distributed in the hope that it will be useful, but
+# WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+# General Public License for more details.
+#
+# You should have received a copy of the GNU Lesser General Public License
+# along with PulseAudio; if not, see <http://www.gnu.org/licenses/>.
+
+# This startup script is used only if PulseAudio is started per-user
+# (i.e. not in system mode)
+
+.fail
+
+### Automatically restore the volume of streams and devices
+load-module module-device-restore
+load-module module-stream-restore
+load-module module-card-restore
+
+### Automatically augment property information from .desktop files
+### stored in /usr/share/application
+load-module module-augment-properties
+
+### Should be after module-*-restore but before module-*-detect
+load-module module-switch-on-port-available
+
+### Load audio drivers statically
+### (it's probably better to not load these drivers manually, but instead
+### use module-udev-detect -- see below -- for doing this automatically)
+#load-module module-alsa-sink device="hw:1,0" channels=8 rate=48000 format=s32le
+#load-module module-alsa-source device="hw:1,0" channels=8 rate=48000 format=s32le
+#load-module module-oss device="/dev/dsp" sink_name=output source_name=input
+#load-module module-oss-mmap device="/dev/dsp" sink_name=output source_name=input
+#load-module module-null-sink
+#load-module module-pipe-sink
+
+### Automatically load driver modules depending on the hardware available
+.ifexists module-udev-detect.so
+load-module module-udev-detect tsched=0
+#channels=8 rate=48000 format=s32le
+.else
+### Use the static hardware detection module (for systems that lack udev support)
+load-module module-detect
+.endif
+
+### Automatically connect sink and source if JACK server is present
+.ifexists module-jackdbus-detect.so
+.nofail
+load-module module-jackdbus-detect channels=2
+.fail
+.endif
+
+### Automatically load driver modules for Bluetooth hardware
+.ifexists module-bluetooth-policy.so
+load-module module-bluetooth-policy
+.endif
+
+.ifexists module-bluetooth-discover.so
+load-module module-bluetooth-discover
+.endif
+
+### Load several protocols
+.ifexists module-esound-protocol-unix.so
+load-module module-esound-protocol-unix
+.endif
+load-module module-native-protocol-unix auth-anonymous=1
+
+### Network access (may be configured with paprefs, so leave this commented
+### here if you plan to use paprefs)
+#load-module module-esound-protocol-tcp
+load-module module-native-protocol-tcp auth-ip-acl=127.0.0.1;192.168.0.0/16;172.16.0.0/12;10.0.0.0/8 auth-anonymous=1
+load-module module-zeroconf-publish
+
+### Load the RTP receiver module (also configured via paprefs, see above)
+#load-module module-rtp-recv
+
+### Load the RTP sender module (also configured via paprefs, see above)
+#load-module module-null-sink sink_name=rtp format=s16be channels=2 rate=44100 sink_properties="device.description='RTP Multicast Sink'"
+#load-module module-rtp-send source=rtp.monitor
+
+### Load additional modules from GConf settings. This can be configured with the paprefs tool.
+### Please keep in mind that the modules configured by paprefs might conflict with manually
+### loaded modules.
+.ifexists module-gconf.so
+.nofail
+load-module module-gconf
+.fail
+.endif
+
+### Automatically restore the default sink/source when changed by the user
+### during runtime
+### NOTE: This should be loaded as early as possible so that subsequent modules
+### that look up the default sink/source get the right value
+load-module module-default-device-restore
+
+### Automatically move streams to the default sink if the sink they are
+### connected to dies, similar for sources
+load-module module-rescue-streams
+
+### Make sure we always have a sink around, even if it is a null sink.
+load-module module-always-sink
+
+### Honour intended role device property
+load-module module-intended-roles
+
+### Automatically suspend sinks/sources that become idle for too long
+load-module module-suspend-on-idle
+
+### If autoexit on idle is enabled we want to make sure we only quit
+### when no local session needs us anymore.
+.ifexists module-console-kit.so
+load-module module-console-kit
+.endif
+.ifexists module-systemd-login.so
+load-module module-systemd-login
+.endif
+
+### Enable positioned event sounds
+load-module module-position-event-sounds
+
+### Cork music/video streams when a phone stream is active
+load-module module-role-cork
+
+### Modules to allow autoloading of filters (such as echo cancellation)
+### on demand. module-filter-heuristics tries to determine what filters
+### make sense, and module-filter-apply does the heavy-lifting of
+### loading modules and rerouting streams.
+load-module module-filter-heuristics
+load-module module-filter-apply
+
+### Make some devices default
+#set-default-sink output
+#set-default-source input
+#set-default-source alsa_input.platform-soc_sound.seeed-source
+#set-default-sink alsa_output.platform-soc_sound.seeed-sink
+
+### MycroftOS Audio Settings
+unload-module module-suspend-on-idle
+unload-module module-role-cork
+load-module module-role-ducking
+
+### Enable Echo/Noise-Cancellation
+#load-module module-echo-cancel aec_method=webrtc source_name=echoCancel_source sink_name=echoCancel_sink
+#set-default-source echoCancel_source
+#set-default-sink echoCancel_sink

buildroot-external/board/raspberrypi/rootfs-overlay/etc/pulse/seeed-voicecard-8mic-daemon.conf

@@ -0,0 +1,94 @@
+# This file is part of PulseAudio.
+#
+# PulseAudio is free software; you can redistribute it and/or modify
+# it under the terms of the GNU Lesser General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+#
+# PulseAudio is distributed in the hope that it will be useful, but
+# WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+# General Public License for more details.
+#
+# You should have received a copy of the GNU Lesser General Public License
+# along with PulseAudio; if not, see <http://www.gnu.org/licenses/>.
+
+## Configuration file for the PulseAudio daemon. See pulse-daemon.conf(5) for
+## more information. Default values are commented out.  Use either ; or # for
+## commenting.
+
+; daemonize = no
+; fail = yes
+; allow-module-loading = yes
+; allow-exit = yes
+; use-pid-file = yes
+; system-instance = no
+; local-server-type = user
+; enable-shm = yes
+; enable-memfd = yes
+; shm-size-bytes = 0 # setting this 0 will use the system-default, usually 64 MiB
+; lock-memory = no
+; cpu-limit = no
+
+; high-priority = yes
+; nice-level = -11
+
+; realtime-scheduling = yes
+; realtime-priority = 5
+
+; exit-idle-time = 20
+; scache-idle-time = 20
+
+; dl-search-path = (depends on architecture)
+
+; load-default-script-file = yes
+; default-script-file = /etc/pulse/default.pa
+
+; log-target = auto
+; log-level = notice
+; log-meta = no
+; log-time = no
+; log-backtrace = 0
+
+; resample-method = speex-float-1
+; enable-remixing = yes
+; enable-lfe-remixing = no
+; lfe-crossover-freq = 0
+
+; flat-volumes = yes
+
+; rlimit-fsize = -1
+; rlimit-data = -1
+; rlimit-stack = -1
+; rlimit-core = -1
+; rlimit-as = -1
+; rlimit-rss = -1
+; rlimit-nproc = -1
+; rlimit-nofile = 256
+; rlimit-memlock = -1
+; rlimit-locks = -1
+; rlimit-sigpending = -1
+; rlimit-msgqueue = -1
+; rlimit-nice = 31
+; rlimit-rtprio = 9
+; rlimit-rttime = 200000
+
+; default-sample-format = s32le
+; default-sample-rate = 96000
+; alternate-sample-rate = 48000
+; default-sample-channels = 8
+; default-channel-map = front-left,front-right
+
+; default-fragments = 4
+; default-fragment-size-msec = 25
+
+; enable-deferred-volume = yes
+; deferred-volume-safety-margin-usec = 8000
+; deferred-volume-extra-delay-usec = 0
+
+# MycroftOS Audio Settings
+avoid-resampling = yes
+default-sample-format = s24le
+default-sample-rate = 48000
+alternate-sample-rate = 44100
+default-sample-channels = 8

buildroot-external/board/raspberrypi/rootfs-overlay/etc/pulse/seeed-voicecard-8mic-default.pa

@@ -0,0 +1,154 @@
+#!/usr/bin/pulseaudio -nF
+#
+# This file is part of PulseAudio.
+#
+# PulseAudio is free software; you can redistribute it and/or modify it
+# under the terms of the GNU Lesser General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+#
+# PulseAudio is distributed in the hope that it will be useful, but
+# WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+# General Public License for more details.
+#
+# You should have received a copy of the GNU Lesser General Public License
+# along with PulseAudio; if not, see <http://www.gnu.org/licenses/>.
+
+# This startup script is used only if PulseAudio is started per-user
+# (i.e. not in system mode)
+
+.fail
+
+### Automatically restore the volume of streams and devices
+load-module module-device-restore
+load-module module-stream-restore
+load-module module-card-restore
+
+### Automatically augment property information from .desktop files
+### stored in /usr/share/application
+load-module module-augment-properties
+
+### Should be after module-*-restore but before module-*-detect
+load-module module-switch-on-port-available
+
+### Load audio drivers statically
+### (it's probably better to not load these drivers manually, but instead
+### use module-udev-detect -- see below -- for doing this automatically)
+#load-module module-alsa-sink device="hw:1,0" channels=8 rate=48000 format=s32le
+#load-module module-alsa-source device="hw:1,0" channels=8 rate=48000 format=s32le
+#load-module module-oss device="/dev/dsp" sink_name=output source_name=input
+#load-module module-oss-mmap device="/dev/dsp" sink_name=output source_name=input
+#load-module module-null-sink
+#load-module module-pipe-sink
+
+### Automatically load driver modules depending on the hardware available
+.ifexists module-udev-detect.so
+load-module module-udev-detect tsched=0
+#channels=8 rate=48000 format=s32le
+.else
+### Use the static hardware detection module (for systems that lack udev support)
+load-module module-detect
+.endif
+
+### Automatically connect sink and source if JACK server is present
+.ifexists module-jackdbus-detect.so
+.nofail
+load-module module-jackdbus-detect channels=2
+.fail
+.endif
+
+### Automatically load driver modules for Bluetooth hardware
+.ifexists module-bluetooth-policy.so
+load-module module-bluetooth-policy
+.endif
+
+.ifexists module-bluetooth-discover.so
+load-module module-bluetooth-discover
+.endif
+
+### Load several protocols
+.ifexists module-esound-protocol-unix.so
+load-module module-esound-protocol-unix
+.endif
+load-module module-native-protocol-unix auth-anonymous=1
+
+### Network access (may be configured with paprefs, so leave this commented
+### here if you plan to use paprefs)
+#load-module module-esound-protocol-tcp
+load-module module-native-protocol-tcp auth-ip-acl=127.0.0.1;192.168.0.0/16;172.16.0.0/12;10.0.0.0/8 auth-anonymous=1
+load-module module-zeroconf-publish
+
+### Load the RTP receiver module (also configured via paprefs, see above)
+#load-module module-rtp-recv
+
+### Load the RTP sender module (also configured via paprefs, see above)
+#load-module module-null-sink sink_name=rtp format=s16be channels=2 rate=44100 sink_properties="device.description='RTP Multicast Sink'"
+#load-module module-rtp-send source=rtp.monitor
+
+### Load additional modules from GConf settings. This can be configured with the paprefs tool.
+### Please keep in mind that the modules configured by paprefs might conflict with manually
+### loaded modules.
+.ifexists module-gconf.so
+.nofail
+load-module module-gconf
+.fail
+.endif
+
+### Automatically restore the default sink/source when changed by the user
+### during runtime
+### NOTE: This should be loaded as early as possible so that subsequent modules
+### that look up the default sink/source get the right value
+load-module module-default-device-restore
+
+### Automatically move streams to the default sink if the sink they are
+### connected to dies, similar for sources
+load-module module-rescue-streams
+
+### Make sure we always have a sink around, even if it is a null sink.
+load-module module-always-sink
+
+### Honour intended role device property
+load-module module-intended-roles
+
+### Automatically suspend sinks/sources that become idle for too long
+load-module module-suspend-on-idle
+
+### If autoexit on idle is enabled we want to make sure we only quit
+### when no local session needs us anymore.
+.ifexists module-console-kit.so
+load-module module-console-kit
+.endif
+.ifexists module-systemd-login.so
+load-module module-systemd-login
+.endif
+
+### Enable positioned event sounds
+load-module module-position-event-sounds
+
+### Cork music/video streams when a phone stream is active
+load-module module-role-cork
+
+### Modules to allow autoloading of filters (such as echo cancellation)
+### on demand. module-filter-heuristics tries to determine what filters
+### make sense, and module-filter-apply does the heavy-lifting of
+### loading modules and rerouting streams.
+load-module module-filter-heuristics
+load-module module-filter-apply
+
+### Make some devices default
+#set-default-sink output
+#set-default-source input
+#set-default-source alsa_input.platform-soc_sound.seeed-8ch
+#set-default-sink alsa_output.platform-soc_sound.seeed-2ch
+
+### MycroftOS Audio Settings
+unload-module module-suspend-on-idle
+unload-module module-role-cork
+load-module module-role-ducking
+
+### Enable Echo/Noise-Cancellation
+#load-module module-echo-cancel aec_method=webrtc source_name=echoCancel_source sink_name=echoCancel_sink
+#set-default-source echoCancel_source
+#set-default-sink echoCancel_sink
+

buildroot-external/board/raspberrypi/rootfs-overlay/etc/systemd/network/wifi.network.ap

@@ -0,0 +1,7 @@
+[Match]
+Name=ap0
+[Network]
+Address=172.16.127.1/28
+DHCPServer=yes
+[DHCPServer]
+DNS=172.16.127.1

buildroot-external/board/raspberrypi/rootfs-overlay/etc/systemd/network/wifi.network.client

@@ -0,0 +1,6 @@
+[Match]
+Name=wlan0
+[Network]
+DHCP=ipv4
+[DHCP]
+RouteMetric=20

buildroot-external/board/raspberrypi/rootfs-overlay/etc/systemd/resolved.conf

@@ -0,0 +1,24 @@
+#  This file is part of systemd.
+#
+#  systemd is free software; you can redistribute it and/or modify it
+#  under the terms of the GNU Lesser General Public License as published by
+#  the Free Software Foundation; either version 2.1 of the License, or
+#  (at your option) any later version.
+#
+# Entries in this file show the compile time defaults.
+# You can change settings by editing this file.
+# Defaults can be restored by simply deleting this file.
+#
+# See resolved.conf(5) for details
+
+[Resolve]
+#DNS=
+#FallbackDNS=8.8.8.8 8.8.4.4 2001:4860:4860::8888 2001:4860:4860::8844
+#Domains=
+#LLMNR=yes
+#MulticastDNS=yes
+#DNSSEC=no
+#DNSOverTLS=no
+#Cache=yes
+DNSStubListener=no
+#ReadEtcHosts=yes

buildroot-external/board/raspberrypi/rootfs-overlay/etc/udev/rules.d/70-ap-interface.rules

@@ -0,0 +1 @@
+SUBSYSTEM=="net", KERNEL=="wlan*", ACTION=="add", RUN+="/sbin/iw dev %k interface add ap%n type __ap"

buildroot-external/board/raspberrypi/rootfs-overlay/etc/udev/rules.d/99-com.rules

@@ -0,0 +1,13 @@
+SUBSYSTEM=="input", GROUP="input", MODE="0660"
+SUBSYSTEM=="i2c-dev", GROUP="i2c", MODE="0660"
+SUBSYSTEM=="spidev", GROUP="spi", MODE="0660"
+SUBSYSTEM=="bcm2835-gpiomem", GROUP="gpio", MODE="0660"
+SUBSYSTEM=="argon-*", GROUP="video", MODE="0660"
+SUBSYSTEM=="rpivid-*", GROUP="video", MODE="0660"
+
+SUBSYSTEM=="gpio", GROUP="gpio", MODE="0660"
+SUBSYSTEM=="gpio*", PROGRAM="/bin/sh -c '\
+        chown -R root:gpio /sys/class/gpio && chmod -R 770 /sys/class/gpio;\
+        chown -R root:gpio /sys/devices/virtual/gpio && chmod -R 770 /sys/devices/virtual/gpio;\
+        chown -R root:gpio /sys$devpath && chmod -R 770 /sys$devpath\
+'"

buildroot-external/board/raspberrypi/rootfs-overlay/home/mycroft/.mycroft/precise/hey-mycroft.pb.params

@@ -0,0 +1 @@
+{"window_t": 0.1, "hop_t": 0.05, "buffer_t": 1.5, "sample_rate": 16000, "sample_depth": 2, "n_mfcc": 13, "n_filt": 20, "n_fft": 512}

buildroot-external/board/raspberrypi/rootfs-overlay/home/mycroft/.mycroft/precise/precise-engine/include/python3.4m/pyconfig.h

@@ -0,0 +1,79 @@
+#if defined(__linux__)
+# if defined(__x86_64__) && defined(__LP64__)
+#  include <x86_64-linux-gnu/python3.4m/pyconfig.h>
+# elif defined(__x86_64__) && defined(__ILP32__)
+#  include <x86_64-linux-gnux32/python3.4m/pyconfig.h>
+# elif defined(__i386__)
+#  include <i386-linux-gnu/python3.4m/pyconfig.h>
+# elif defined(__aarch64__) && defined(__AARCH64EL__)
+#  include <aarch64-linux-gnu/python3.4m/pyconfig.h>
+# elif defined(__alpha__)
+#  include <alpha-linux-gnu/python3.4m/pyconfig.h>
+# elif defined(__ARM_EABI__) && defined(__ARM_PCS_VFP)
+#  include <arm-linux-gnueabihf/python3.4m/pyconfig.h>
+# elif defined(__ARM_EABI__) && !defined(__ARM_PCS_VFP)
+#  include <arm-linux-gnueabi/python3.4m/pyconfig.h>
+# elif defined(__hppa__)
+#  include <hppa-linux-gnu/python3.4m/pyconfig.h>
+# elif defined(__ia64__)
+#  include <ia64-linux-gnu/python3.4m/pyconfig.h>
+# elif defined(__m68k__) && !defined(__mcoldfire__)
+#  include <m68k-linux-gnu/python3.4m/pyconfig.h>
+# elif defined(__mips_hard_float) && defined(_MIPSEL)
+#  if _MIPS_SIM == _ABIO32
+#   include <mipsel-linux-gnu/python3.4m/pyconfig.h>
+#  elif _MIPS_SIM == _ABIN32
+#   include <mips64el-linux-gnuabin32/python3.4m/pyconfig.h>
+#  elif _MIPS_SIM == _ABI64
+#   include <mips64el-linux-gnuabi64/python3.4m/pyconfig.h>
+#  else
+#   error unknown multiarch location for pyconfig.h
+#  endif
+# elif defined(__mips_hard_float)
+#  if _MIPS_SIM == _ABIO32
+#   include <mips-linux-gnu/python3.4m/pyconfig.h>
+#  elif _MIPS_SIM == _ABIN32
+#   include <mips64-linux-gnuabin32/python3.4m/pyconfig.h>
+#  elif _MIPS_SIM == _ABI64
+#   include <mips64-linux-gnuabi64/python3.4m/pyconfig.h>
+#  else
+#   error unknown multiarch location for pyconfig.h
+#  endif
+# elif defined(__or1k__)
+#  include <or1k-linux-gnu/python3.4m/pyconfig.h>
+# elif defined(__powerpc__) && defined(__SPE__)
+#  include <powerpc-linux-gnuspe/python3.4m/pyconfig.h>
+# elif defined(__powerpc64__)
+#  if defined(__LITTLE_ENDIAN__)
+#    include <powerpc64le-linux-gnu/python3.4m/pyconfig.h>
+#  else
+#    include <powerpc64-linux-gnu/python3.4m/pyconfig.h>
+#  endif
+# elif defined(__powerpc__)
+#  include <powerpc-linux-gnu/python3.4m/pyconfig.h>
+# elif defined(__s390x__)
+#  include <s390x-linux-gnu/python3.4m/pyconfig.h>
+# elif defined(__s390__)
+#  include <s390-linux-gnu/python3.4m/pyconfig.h>
+# elif defined(__sh__) && defined(__LITTLE_ENDIAN__)
+#  include <sh4-linux-gnu/python3.4m/pyconfig.h>
+# elif defined(__sparc__) && defined(__arch64__)
+#  include <sparc64-linux-gnu/python3.4m/pyconfig.h>
+# elif defined(__sparc__)
+#  include <sparc-linux-gnu/python3.4m/pyconfig.h>
+# else
+#   error unknown multiarch location for pyconfig.h
+# endif
+#elif defined(__FreeBSD_kernel__)
+# if defined(__LP64__)
+#  include <x86_64-kfreebsd-gnu/python3.4m/pyconfig.h>
+# elif defined(__i386__)
+#  include <i386-kfreebsd-gnu/python3.4m/pyconfig.h>
+# else
+#   error unknown multiarch location for pyconfig.h
+# endif
+#elif defined(__gnu_hurd__)
+# include <i386-gnu/python3.4m/pyconfig.h>
+#else
+# error unknown multiarch location for pyconfig.h
+#endif

buildroot-external/board/raspberrypi/rootfs-overlay/home/mycroft/.mycroft/precise/precise-engine/lib2to3/Grammar.txt

@@ -0,0 +1,159 @@
+# Grammar for 2to3. This grammar supports Python 2.x and 3.x.
+
+# Note:  Changing the grammar specified in this file will most likely
+#        require corresponding changes in the parser module
+#        (../Modules/parsermodule.c).  If you can't make the changes to
+#        that module yourself, please co-ordinate the required changes
+#        with someone who can; ask around on python-dev for help.  Fred
+#        Drake <fdrake@acm.org> will probably be listening there.
+
+# NOTE WELL: You should also follow all the steps listed in PEP 306,
+# "How to Change Python's Grammar"
+
+# Commands for Kees Blom's railroad program
+#diagram:token NAME
+#diagram:token NUMBER
+#diagram:token STRING
+#diagram:token NEWLINE
+#diagram:token ENDMARKER
+#diagram:token INDENT
+#diagram:output\input python.bla
+#diagram:token DEDENT
+#diagram:output\textwidth 20.04cm\oddsidemargin  0.0cm\evensidemargin 0.0cm
+#diagram:rules
+
+# Start symbols for the grammar:
+#	file_input is a module or sequence of commands read from an input file;
+#	single_input is a single interactive statement;
+#	eval_input is the input for the eval() and input() functions.
+# NB: compound_stmt in single_input is followed by extra NEWLINE!
+file_input: (NEWLINE | stmt)* ENDMARKER
+single_input: NEWLINE | simple_stmt | compound_stmt NEWLINE
+eval_input: testlist NEWLINE* ENDMARKER
+
+decorator: '@' dotted_name [ '(' [arglist] ')' ] NEWLINE
+decorators: decorator+
+decorated: decorators (classdef | funcdef)
+funcdef: 'def' NAME parameters ['->' test] ':' suite
+parameters: '(' [typedargslist] ')'
+typedargslist: ((tfpdef ['=' test] ',')*
+                ('*' [tname] (',' tname ['=' test])* [',' '**' tname] | '**' tname)
+                | tfpdef ['=' test] (',' tfpdef ['=' test])* [','])
+tname: NAME [':' test]
+tfpdef: tname | '(' tfplist ')'
+tfplist: tfpdef (',' tfpdef)* [',']
+varargslist: ((vfpdef ['=' test] ',')*
+              ('*' [vname] (',' vname ['=' test])*  [',' '**' vname] | '**' vname)
+              | vfpdef ['=' test] (',' vfpdef ['=' test])* [','])
+vname: NAME
+vfpdef: vname | '(' vfplist ')'
+vfplist: vfpdef (',' vfpdef)* [',']
+
+stmt: simple_stmt | compound_stmt
+simple_stmt: small_stmt (';' small_stmt)* [';'] NEWLINE
+small_stmt: (expr_stmt | print_stmt  | del_stmt | pass_stmt | flow_stmt |
+             import_stmt | global_stmt | exec_stmt | assert_stmt)
+expr_stmt: testlist_star_expr (augassign (yield_expr|testlist) |
+                     ('=' (yield_expr|testlist_star_expr))*)
+testlist_star_expr: (test|star_expr) (',' (test|star_expr))* [',']
+augassign: ('+=' | '-=' | '*=' | '@=' | '/=' | '%=' | '&=' | '|=' | '^=' |
+            '<<=' | '>>=' | '**=' | '//=')
+# For normal assignments, additional restrictions enforced by the interpreter
+print_stmt: 'print' ( [ test (',' test)* [','] ] |
+                      '>>' test [ (',' test)+ [','] ] )
+del_stmt: 'del' exprlist
+pass_stmt: 'pass'
+flow_stmt: break_stmt | continue_stmt | return_stmt | raise_stmt | yield_stmt
+break_stmt: 'break'
+continue_stmt: 'continue'
+return_stmt: 'return' [testlist]
+yield_stmt: yield_expr
+raise_stmt: 'raise' [test ['from' test | ',' test [',' test]]]
+import_stmt: import_name | import_from
+import_name: 'import' dotted_as_names
+import_from: ('from' ('.'* dotted_name | '.'+)
+              'import' ('*' | '(' import_as_names ')' | import_as_names))
+import_as_name: NAME ['as' NAME]
+dotted_as_name: dotted_name ['as' NAME]
+import_as_names: import_as_name (',' import_as_name)* [',']
+dotted_as_names: dotted_as_name (',' dotted_as_name)*
+dotted_name: NAME ('.' NAME)*
+global_stmt: ('global' | 'nonlocal') NAME (',' NAME)*
+exec_stmt: 'exec' expr ['in' test [',' test]]
+assert_stmt: 'assert' test [',' test]
+
+compound_stmt: if_stmt | while_stmt | for_stmt | try_stmt | with_stmt | funcdef | classdef | decorated
+if_stmt: 'if' test ':' suite ('elif' test ':' suite)* ['else' ':' suite]
+while_stmt: 'while' test ':' suite ['else' ':' suite]
+for_stmt: 'for' exprlist 'in' testlist ':' suite ['else' ':' suite]
+try_stmt: ('try' ':' suite
+           ((except_clause ':' suite)+
+	    ['else' ':' suite]
+	    ['finally' ':' suite] |
+	   'finally' ':' suite))
+with_stmt: 'with' with_item (',' with_item)*  ':' suite
+with_item: test ['as' expr]
+with_var: 'as' expr
+# NB compile.c makes sure that the default except clause is last
+except_clause: 'except' [test [(',' | 'as') test]]
+suite: simple_stmt | NEWLINE INDENT stmt+ DEDENT
+
+# Backward compatibility cruft to support:
+# [ x for x in lambda: True, lambda: False if x() ]
+# even while also allowing:
+# lambda x: 5 if x else 2
+# (But not a mix of the two)
+testlist_safe: old_test [(',' old_test)+ [',']]
+old_test: or_test | old_lambdef
+old_lambdef: 'lambda' [varargslist] ':' old_test
+
+test: or_test ['if' or_test 'else' test] | lambdef
+or_test: and_test ('or' and_test)*
+and_test: not_test ('and' not_test)*
+not_test: 'not' not_test | comparison
+comparison: expr (comp_op expr)*
+comp_op: '<'|'>'|'=='|'>='|'<='|'<>'|'!='|'in'|'not' 'in'|'is'|'is' 'not'
+star_expr: '*' expr
+expr: xor_expr ('|' xor_expr)*
+xor_expr: and_expr ('^' and_expr)*
+and_expr: shift_expr ('&' shift_expr)*
+shift_expr: arith_expr (('<<'|'>>') arith_expr)*
+arith_expr: term (('+'|'-') term)*
+term: factor (('*'|'@'|'/'|'%'|'//') factor)*
+factor: ('+'|'-'|'~') factor | power
+power: atom trailer* ['**' factor]
+atom: ('(' [yield_expr|testlist_gexp] ')' |
+       '[' [listmaker] ']' |
+       '{' [dictsetmaker] '}' |
+       '`' testlist1 '`' |
+       NAME | NUMBER | STRING+ | '.' '.' '.')
+listmaker: (test|star_expr) ( comp_for | (',' (test|star_expr))* [','] )
+testlist_gexp: (test|star_expr) ( comp_for | (',' (test|star_expr))* [','] )
+lambdef: 'lambda' [varargslist] ':' test
+trailer: '(' [arglist] ')' | '[' subscriptlist ']' | '.' NAME
+subscriptlist: subscript (',' subscript)* [',']
+subscript: test | [test] ':' [test] [sliceop]
+sliceop: ':' [test]
+exprlist: (expr|star_expr) (',' (expr|star_expr))* [',']
+testlist: test (',' test)* [',']
+dictsetmaker: ( (test ':' test (comp_for | (',' test ':' test)* [','])) |
+                (test (comp_for | (',' test)* [','])) )
+
+classdef: 'class' NAME ['(' [arglist] ')'] ':' suite
+
+arglist: (argument ',')* (argument [',']
+                         |'*' test (',' argument)* [',' '**' test] 
+                         |'**' test)
+argument: test [comp_for] | test '=' test  # Really [keyword '='] test
+
+comp_iter: comp_for | comp_if
+comp_for: 'for' exprlist 'in' testlist_safe [comp_iter]
+comp_if: 'if' old_test [comp_iter]
+
+testlist1: test (',' test)*
+
+# not used in grammar, but may appear in "node" passed from Parser to Compiler
+encoding_decl: NAME
+
+yield_expr: 'yield' [yield_arg]
+yield_arg: 'from' test | testlist

buildroot-external/board/raspberrypi/rootfs-overlay/home/mycroft/.mycroft/precise/precise-engine/lib2to3/PatternGrammar.txt

@@ -0,0 +1,28 @@
+# Copyright 2006 Google, Inc. All Rights Reserved.
+# Licensed to PSF under a Contributor Agreement.
+
+# A grammar to describe tree matching patterns.
+# Not shown here:
+# - 'TOKEN' stands for any token (leaf node)
+# - 'any' stands for any node (leaf or interior)
+# With 'any' we can still specify the sub-structure.
+
+# The start symbol is 'Matcher'.
+
+Matcher: Alternatives ENDMARKER
+
+Alternatives: Alternative ('|' Alternative)*
+
+Alternative: (Unit | NegatedUnit)+
+
+Unit: [NAME '='] ( STRING [Repeater]
+                 | NAME [Details] [Repeater]
+                 | '(' Alternatives ')' [Repeater]
+                 | '[' Alternatives ']'
+		 )
+
+NegatedUnit: 'not' (STRING | NAME [Details] | '(' Alternatives ')')
+
+Repeater: '*' | '+' | '{' NUMBER [',' NUMBER] '}'
+
+Details: '<' Alternatives '>'