Another big bump in packages and buildroot

buildroot

@@ -1 +1 @@
-Subproject commit 45464c7c1a5b15493545bd784629440f1db7d381
+Subproject commit b8909c9e9e93bd46e7ea0ca34269bb1c1e087108

buildroot-external/board/ovos/raspberrypi/rootfs-overlay/usr/libexec/ovos-i2csound

@@ -197,8 +197,7 @@ main() {
             sleep 3 # Allow some time to fully initialise the hardware / driver
         fi
         xvf3510-flash --direct "/usr/lib/firmware/xvf3510/app_xvf3510_int_spi_boot_v4_2_0.bin"
-        # Initializing Texas Instruments 5806 Amplifier
+
-        /usr/bin/tas5806-init
         if [[ ${detection_results[SJ201LED]} == true ]] ; then
             echo "Found revision-6 SJ-201 board"
             # Initializing and resetting LED ring

buildroot-external/board/ovos/raspberrypi/rootfs-overlay/usr/share/alsa-card-profile/mixer/profile-sets/sj201.conf

@@ -1,10 +1,10 @@
-# /usr/share/alsa-card-profile/mixer/profile-sets/xvf3510.conf
+# /usr/share/alsa-card-profile/mixer/profile-sets/sj201.conf
 
 [General]
 auto-profiles = no
 
 [Mapping xvf3510-asr]
-device-strings = hw:%f
+device-strings = hw:%f,1
 channel-map = front-left
 exact-channels = yes
 fallback = yes
@@ -13,7 +13,7 @@ priority = 2
 direction = input
 
 [Mapping xvf3510-comms]
-device-strings = hw:%f
+device-strings = hw:%f,1
 channel-map = front-right
 exact-channels = yes
 fallback = yes
@@ -21,23 +21,23 @@ paths-input = xvf3510-comms
 priority = 3
 direction = input
 
-[Mapping xvf3510-stereo-output]
+[Mapping tas5806md-stereo-output]
-device-strings = hw:%f
+device-strings = hw:%f,0
-channel-map = front-left,front-right
+channel-map = left,right
 exact-channels = yes
 fallback = yes
-paths-output = xvf3510-stereo-output
+paths-output = tas5805md-stereo-output
 direction = output
 priority = 2
 
-[Profile output:xvf3510-stereo-output+input:xvf3510-asr]
+[Profile output:tas5806md-stereo-output+input:xvf3510-asr]
-output-mappings = xvf3510-stereo-output
+output-mappings = tas5806md-stereo-output
 input-mappings = xvf3510-asr
 priority = 100
 skip-probe = yes
 
-[Profile output:xvf3510-stereo-output]
+[Profile output:tas5806md-stereo-output]
-output-mappings = xvf3510-stereo-output
+output-mappings = tas5806md-stereo-output
 priority = 4
 skip-probe = yes
 

buildroot-external/configs/rpi4_64_defconfig

@@ -2,7 +2,8 @@ BR2_aarch64=y
 BR2_cortex_a72=y
 BR2_TOOLCHAIN_EXTERNAL=y
 BR2_TOOLCHAIN_EXTERNAL_BOOTLIN=y
-BR2_TOOLCHAIN_EXTERNAL_BOOTLIN_AARCH64_GLIBC_STABLE=y
+BR2_TOOLCHAIN_GLIBC_GCONV_LIBS_COPY=y
+BR2_WGET="wget --passive-ftp -nd -t 3"
 BR2_DL_DIR="../../downloads"
 BR2_CCACHE=y
 BR2_CCACHE_DIR="ccache"
@@ -29,7 +30,7 @@ BR2_ROOTFS_POST_IMAGE_SCRIPT="$(BR2_EXTERNAL)/scripts/post-image.sh"
 BR2_ROOTFS_POST_SCRIPT_ARGS="$(BR2_EXTERNAL)/board/ovos/raspberrypi/rpi4"
 BR2_LINUX_KERNEL=y
 BR2_LINUX_KERNEL_CUSTOM_TARBALL=y
-BR2_LINUX_KERNEL_CUSTOM_TARBALL_LOCATION="$(call github,raspberrypi,linux,37573248884ec252165a246df21642c52573f013)/linux-37573248884ec252165a246df21642c52573f013.tar.gz"
+BR2_LINUX_KERNEL_CUSTOM_TARBALL_LOCATION="$(call github,raspberrypi,linux,e0c78d59082aaadb95fc301af239c991686a1822)/linux-e0c78d59082aaadb95fc301af239c991686a1822.tar.gz"
 BR2_LINUX_KERNEL_DEFCONFIG="bcm2711"
 BR2_LINUX_KERNEL_CONFIG_FRAGMENT_FILES="$(BR2_EXTERNAL)/kernel/ovos.config $(BR2_EXTERNAL)/kernel/device-drivers.config $(BR2_EXTERNAL)/kernel/docker.config $(BR2_EXTERNAL)/board/ovos/raspberrypi/kernel.config"
 BR2_LINUX_KERNEL_LZ4=y
@@ -174,6 +175,8 @@ BR2_PACKAGE_TIFF=y
 BR2_PACKAGE_WEBP=y
 BR2_PACKAGE_WIREPLUMBER=y
 BR2_PACKAGE_ZBAR=y
+BR2_PACKAGE_LIBGPIOD2=y
+BR2_PACKAGE_LIBGPIOD2_TOOLS=y
 BR2_PACKAGE_LIBINPUT=y
 BR2_PACKAGE_LIBV4L_UTILS=y
 BR2_PACKAGE_JSON_GLIB=y

buildroot-external/package/vocalfusion/vocalfusion.hash

@@ -1,2 +1,2 @@
 # Locally computed
-sha256  198eed5d409d79aa58d2db6a29073efce96b2fb6efaedbe1851c705f58f50633  vocalfusion-5ca7f45cb5b679859fb251fdc870571a75dfb0a7.tar.gz
+sha256  c4b36d37efca5806db70a295ff0c0057899db6851a7488a37a81a9c83bc3e770  vocalfusion-7302017594244e9575da9848bb894460ecf3354c.tar.gz

buildroot-external/package/vocalfusion/vocalfusion.mk

@@ -4,7 +4,7 @@
 #
 ################################################################################
 
-VOCALFUSION_VERSION = 5ca7f45cb5b679859fb251fdc870571a75dfb0a7
+VOCALFUSION_VERSION = 7302017594244e9575da9848bb894460ecf3354c
 VOCALFUSION_SITE = $(call github,OpenVoiceOS,VocalFusionDriver,$(VOCALFUSION_VERSION))
 VOCALFUSION_MODULE_SUBDIRS = driver
 

buildroot-external/patches/linux/0001-sched-Constrain-locks-in-sched_submit_work.patch

@@ -1,7 +1,7 @@
-From 75831a0c7ffb6d0882e51932376528634e26c979 Mon Sep 17 00:00:00 2001
+From 64fda55272af2f6281bb12f2b2add77d95c1ca18 Mon Sep 17 00:00:00 2001
 From: Peter Zijlstra <peterz@infradead.org>
 Date: Fri, 8 Sep 2023 18:22:48 +0200
-Subject: [PATCH 001/198] sched: Constrain locks in sched_submit_work()
+Subject: [PATCH 001/196] sched: Constrain locks in sched_submit_work()
 
 Even though sched_submit_work() is ran from preemptible context,
 it is discouraged to have it use blocking locks due to the recursion
@@ -50,5 +50,5 @@ index 1f91e2c12731..73949b8a55d2 100644
  
  static void sched_update_worker(struct task_struct *tsk)
 -- 
-2.44.0
+2.45.1
 

buildroot-external/patches/linux/0002-locking-rtmutex-Avoid-unconditional-slowpath-for-DEB.patch

@@ -1,7 +1,7 @@
-From b37a6d8e83b287d53965b7a90e912a9b43d39fd0 Mon Sep 17 00:00:00 2001
+From 5c3a150e1c7cb9488ad89b655bfd9fc460e2a2f9 Mon Sep 17 00:00:00 2001
 From: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
 Date: Fri, 8 Sep 2023 18:22:49 +0200
-Subject: [PATCH 002/198] locking/rtmutex: Avoid unconditional slowpath for
+Subject: [PATCH 002/196] locking/rtmutex: Avoid unconditional slowpath for
  DEBUG_RT_MUTEXES
 
 With DEBUG_RT_MUTEXES enabled the fast-path rt_mutex_cmpxchg_acquire()
@@ -82,5 +82,5 @@ index d1473c624105..c7196de838ed 100644
  			ww_mutex_set_context_fastpath(lock, ww_ctx);
  		return 0;
 -- 
-2.44.0
+2.45.1
 

buildroot-external/patches/linux/0003-sched-Extract-__schedule_loop.patch

@@ -1,7 +1,7 @@
-From 1878b10b7153990220aa3a02b8c92e1528701093 Mon Sep 17 00:00:00 2001
+From 274c3a06b39727d2ceea622ec9504725ad066758 Mon Sep 17 00:00:00 2001
 From: Thomas Gleixner <tglx@linutronix.de>
 Date: Fri, 8 Sep 2023 18:22:50 +0200
-Subject: [PATCH 003/198] sched: Extract __schedule_loop()
+Subject: [PATCH 003/196] sched: Extract __schedule_loop()
 
 There are currently two implementations of this basic __schedule()
 loop, and there is soon to be a third.
@@ -59,5 +59,5 @@ index 73949b8a55d2..4498af52cf47 100644
  NOKPROBE_SYMBOL(schedule_rtlock);
  #endif
 -- 
-2.44.0
+2.45.1
 

buildroot-external/patches/linux/0004-sched-Provide-rt_mutex-specific-scheduler-helpers.patch

@@ -1,7 +1,7 @@
-From d779fa7b0b348557ed9e2f0a3a5a7710e1aa5c89 Mon Sep 17 00:00:00 2001
+From 7e8cc292a114b7d286d1e01eabe11dad82341a8b Mon Sep 17 00:00:00 2001
 From: Peter Zijlstra <peterz@infradead.org>
 Date: Fri, 8 Sep 2023 18:22:51 +0200
-Subject: [PATCH 004/198] sched: Provide rt_mutex specific scheduler helpers
+Subject: [PATCH 004/196] sched: Provide rt_mutex specific scheduler helpers
 
 With PREEMPT_RT there is a rt_mutex recursion problem where
 sched_submit_work() can use an rtlock (aka spinlock_t). More
@@ -133,5 +133,5 @@ index 4498af52cf47..d703c5427cf2 100644
  {
  	if (pi_task)
 -- 
-2.44.0
+2.45.1
 

buildroot-external/patches/linux/0005-locking-rtmutex-Use-rt_mutex-specific-scheduler-help.patch

@@ -1,7 +1,7 @@
-From 0655b5650cdb7f54ec9ab9ccf5fcf15136d0bf56 Mon Sep 17 00:00:00 2001
+From 5762f7281a1fdd82c3d062c45b22c923e60ec13b Mon Sep 17 00:00:00 2001
 From: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
 Date: Fri, 8 Sep 2023 18:22:52 +0200
-Subject: [PATCH 005/198] locking/rtmutex: Use rt_mutex specific scheduler
+Subject: [PATCH 005/196] locking/rtmutex: Use rt_mutex specific scheduler
  helpers
 
 Have rt_mutex use the rt_mutex specific scheduler helpers to avoid
@@ -187,5 +187,5 @@ index 48a19ed8486d..842037b2ba54 100644
  /*
   * The common functions which get wrapped into the rwlock API.
 -- 
-2.44.0
+2.45.1
 

buildroot-external/patches/linux/0006-locking-rtmutex-Add-a-lockdep-assert-to-catch-potent.patch

@@ -1,7 +1,7 @@
-From b7040e508fc47a6a766cba8d7f827b521d97dc83 Mon Sep 17 00:00:00 2001
+From b71ab9837960957eba5540fa4f8cbdff716d109a Mon Sep 17 00:00:00 2001
 From: Thomas Gleixner <tglx@linutronix.de>
 Date: Fri, 8 Sep 2023 18:22:53 +0200
-Subject: [PATCH 006/198] locking/rtmutex: Add a lockdep assert to catch
+Subject: [PATCH 006/196] locking/rtmutex: Add a lockdep assert to catch
  potential nested blocking
 
 There used to be a BUG_ON(current->pi_blocked_on) in the lock acquisition
@@ -62,5 +62,5 @@ index 842037b2ba54..38e292454fcc 100644
  		rtlock_slowlock(rtm);
  }
 -- 
-2.44.0
+2.45.1
 

buildroot-external/patches/linux/0007-futex-pi-Fix-recursive-rt_mutex-waiter-state.patch

@@ -1,7 +1,7 @@
-From f873113440e07c042dc805df19c8e2ecd3fd5839 Mon Sep 17 00:00:00 2001
+From 2343a071fe4d7b166460763b1c136087413162de Mon Sep 17 00:00:00 2001
 From: Peter Zijlstra <peterz@infradead.org>
 Date: Fri, 15 Sep 2023 17:19:44 +0200
-Subject: [PATCH 007/198] futex/pi: Fix recursive rt_mutex waiter state
+Subject: [PATCH 007/196] futex/pi: Fix recursive rt_mutex waiter state
 
 Some new assertions pointed out that the existing code has nested rt_mutex wait
 state in the futex code.
@@ -200,5 +200,5 @@ index cba8b1a6a4cc..4c73e0b81acc 100644
  		/*
  		 * Fixup the pi_state owner and possibly acquire the lock if we
 -- 
-2.44.0
+2.45.1
 

buildroot-external/patches/linux/0008-signal-Add-proper-comment-about-the-preempt-disable-.patch

@@ -1,7 +1,7 @@
-From 3905f3b627b3ff024c9521d2be49a5077ff79184 Mon Sep 17 00:00:00 2001
+From d491a188fa496d6b2cdf75506baf2f0b9c05f9be Mon Sep 17 00:00:00 2001
 From: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
 Date: Thu, 3 Aug 2023 12:09:31 +0200
-Subject: [PATCH 008/198] signal: Add proper comment about the preempt-disable
+Subject: [PATCH 008/196] signal: Add proper comment about the preempt-disable
  in ptrace_stop().
 
 Commit 53da1d9456fe7 ("fix ptrace slowness") added a preempt-disable section
@@ -48,5 +48,5 @@ index 09019017d669..051ed8114cd4 100644
  	preempt_disable();
  	read_unlock(&tasklist_lock);
 -- 
-2.44.0
+2.45.1
 

buildroot-external/patches/linux/0009-signal-Don-t-disable-preemption-in-ptrace_stop-on-PR.patch

@@ -1,7 +1,7 @@
-From 95d0354ab790443cc09ef6185c09be99540a33f5 Mon Sep 17 00:00:00 2001
+From a1d2d7b91bc31bbfbfbc05438ecbe88fe2d54202 Mon Sep 17 00:00:00 2001
 From: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
 Date: Thu, 3 Aug 2023 12:09:32 +0200
-Subject: [PATCH 009/198] signal: Don't disable preemption in ptrace_stop() on
+Subject: [PATCH 009/196] signal: Don't disable preemption in ptrace_stop() on
  PREEMPT_RT.
 
 On PREEMPT_RT keeping preemption disabled during the invocation of
@@ -49,5 +49,5 @@ index 051ed8114cd4..b71026341056 100644
  	cgroup_leave_frozen(true);
  
 -- 
-2.44.0
+2.45.1
 

buildroot-external/patches/linux/0010-drm-amd-display-Remove-migrate_en-dis-from-dc_fpu_be.patch

@@ -1,7 +1,7 @@
-From 72f23865ddf0ce1b0a37393e990eaaad3d8d4c1d Mon Sep 17 00:00:00 2001
+From 623644e53c2a6223a210481f10e12d2018b6217b Mon Sep 17 00:00:00 2001
 From: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
 Date: Thu, 21 Sep 2023 16:15:12 +0200
-Subject: [PATCH 010/198] drm/amd/display: Remove migrate_en/dis from
+Subject: [PATCH 010/196] drm/amd/display: Remove migrate_en/dis from
  dc_fpu_begin().
 
 This is a revert of the commit mentioned below while it is not wrong, as
@@ -87,5 +87,5 @@ index 172aa10a8800..86f4c0e04654 100644
  		if (cpu_has_feature(CPU_FTR_VSX_COMP)) {
  			disable_kernel_vsx();
 -- 
-2.44.0
+2.45.1
 

buildroot-external/patches/linux/0011-drm-amd-display-Simplify-the-per-CPU-usage.patch

@@ -1,7 +1,7 @@
-From fcb8291bf9d00b262c0d719c4fd11099b5e2407e Mon Sep 17 00:00:00 2001
+From 5249a4a63e601d0bcb87908ce51dc0b62f6623d4 Mon Sep 17 00:00:00 2001
 From: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
 Date: Thu, 21 Sep 2023 16:15:13 +0200
-Subject: [PATCH 011/198] drm/amd/display: Simplify the per-CPU usage.
+Subject: [PATCH 011/196] drm/amd/display: Simplify the per-CPU usage.
 
 The fpu_recursion_depth counter is used to ensure that dc_fpu_begin()
 can be invoked multiple times while the FPU-disable function itself is
@@ -128,5 +128,5 @@ index 86f4c0e04654..8bd5926b47e0 100644
 +	preempt_enable();
  }
 -- 
-2.44.0
+2.45.1
 

buildroot-external/patches/linux/0012-drm-amd-display-Add-a-warning-if-the-FPU-is-used-out.patch

@@ -1,7 +1,7 @@
-From c9e3099dae058e513e74091141f71dfd9e67aefa Mon Sep 17 00:00:00 2001
+From fafd90c1efec381f2a8a462e9debebe092a8b048 Mon Sep 17 00:00:00 2001
 From: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
 Date: Thu, 21 Sep 2023 16:15:14 +0200
-Subject: [PATCH 012/198] drm/amd/display: Add a warning if the FPU is used
+Subject: [PATCH 012/196] drm/amd/display: Add a warning if the FPU is used
  outside from task context.
 
 Add a warning if the FPU is used from any context other than task
@@ -27,5 +27,5 @@ index 8bd5926b47e0..4ae4720535a5 100644
  	depth = __this_cpu_inc_return(fpu_recursion_depth);
  
 -- 
-2.44.0
+2.45.1
 

buildroot-external/patches/linux/0013-drm-amd-display-Move-the-memory-allocation-out-of-dc.patch

@@ -1,7 +1,7 @@
-From 660089faa4f04d68ff2dbce32b7ccd8532978704 Mon Sep 17 00:00:00 2001
+From 247c1f664220f315889e927b71ea7aa7c9bee733 Mon Sep 17 00:00:00 2001
 From: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
 Date: Thu, 21 Sep 2023 16:15:15 +0200
-Subject: [PATCH 013/198] drm/amd/display: Move the memory allocation out of
+Subject: [PATCH 013/196] drm/amd/display: Move the memory allocation out of
  dcn21_validate_bandwidth_fp().
 
 dcn21_validate_bandwidth_fp() is invoked while FPU access has been
@@ -92,5 +92,5 @@ index c51badf7b68a..a81a0b9e6884 100644
  
  void dcn21_clk_mgr_set_bw_params_wm_table(struct clk_bw_params *bw_params);
 -- 
-2.44.0
+2.45.1
 

buildroot-external/patches/linux/0014-drm-amd-display-Move-the-memory-allocation-out-of-dc.patch

@@ -1,7 +1,7 @@
-From a9ce8a34cfe43f0ea168ad2efea0fd0c1fd14a2a Mon Sep 17 00:00:00 2001
+From 4e5f84f3f362e463a2f4b3b678e6f14a4c1022b5 Mon Sep 17 00:00:00 2001
 From: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
 Date: Thu, 21 Sep 2023 16:15:16 +0200
-Subject: [PATCH 014/198] drm/amd/display: Move the memory allocation out of
+Subject: [PATCH 014/196] drm/amd/display: Move the memory allocation out of
  dcn20_validate_bandwidth_fp().
 
 dcn20_validate_bandwidth_fp() is invoked while FPU access has been
@@ -126,5 +126,5 @@ index a81a0b9e6884..b6c34198ddc8 100644
  			     struct pp_smu_wm_range_sets *ranges,
  			     struct _vcs_dpi_soc_bounding_box_st *loaded_bb);
 -- 
-2.44.0
+2.45.1
 

buildroot-external/patches/linux/0015-net-Avoid-the-IPI-to-free-the.patch

@@ -1,7 +1,7 @@
-From 26b7ede776b83df57ce0ab06a5c545490759070b Mon Sep 17 00:00:00 2001
+From 3080305e309931d30a95a7f597fd336d8c18abfc Mon Sep 17 00:00:00 2001
 From: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
 Date: Mon, 15 Aug 2022 17:29:50 +0200
-Subject: [PATCH 015/198] net: Avoid the IPI to free the
+Subject: [PATCH 015/196] net: Avoid the IPI to free the
 
 skb_attempt_defer_free() collects a skbs, which was allocated on a
 remote CPU, on a per-CPU list. These skbs are either freed on that
@@ -105,10 +105,10 @@ index 1f6c8945f2ec..1e8928cd3c75 100644
  
  		init_gro_hash(&sd->backlog);
 diff --git a/net/core/skbuff.c b/net/core/skbuff.c
-index 60876262b3fb..02e2bab1ed8d 100644
+index f0a9ef1aeaa2..682175af439d 100644
 --- a/net/core/skbuff.c
 +++ b/net/core/skbuff.c
-@@ -6852,8 +6852,13 @@ nodefer:	__kfree_skb(skb);
+@@ -6863,8 +6863,13 @@ nodefer:	__kfree_skb(skb);
  	/* Make sure to trigger NET_RX_SOFTIRQ on the remote CPU
  	 * if we are unlucky enough (this seems very unlikely).
  	 */
@@ -124,5 +124,5 @@ index 60876262b3fb..02e2bab1ed8d 100644
  
  static void skb_splice_csum_page(struct sk_buff *skb, struct page *page,
 -- 
-2.44.0
+2.45.1
 

buildroot-external/patches/linux/0016-x86-Allow-to-enable-RT.patch

@@ -1,7 +1,7 @@
-From 98c9c62ae579439b1f83ddbeb9d9cf04842c1b6e Mon Sep 17 00:00:00 2001
+From bd995cd727d2224a50948e9b438bfe8047ee1b32 Mon Sep 17 00:00:00 2001
 From: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
 Date: Wed, 7 Aug 2019 18:15:38 +0200
-Subject: [PATCH 016/198] x86: Allow to enable RT
+Subject: [PATCH 016/196] x86: Allow to enable RT
 
 Allow to select RT.
 
@@ -12,7 +12,7 @@ Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
  1 file changed, 1 insertion(+)
 
 diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig
-index 4b81e884a614..b9c1a286dddc 100644
+index be9248e5cb71..0b9640069679 100644
 --- a/arch/x86/Kconfig
 +++ b/arch/x86/Kconfig
 @@ -28,6 +28,7 @@ config X86_64
@@ -24,5 +24,5 @@ index 4b81e884a614..b9c1a286dddc 100644
  	select HAVE_ARCH_SOFT_DIRTY
  	select MODULES_USE_ELF_RELA
 -- 
-2.44.0
+2.45.1
 

buildroot-external/patches/linux/0017-x86-Enable-RT-also-on-32bit.patch

@@ -1,7 +1,7 @@
-From b474a9ddbb498398c30bc4905b3926eee6f6abed Mon Sep 17 00:00:00 2001
+From 07b4a5b59a1e0dc9174bf6c59e2678ddea5643a7 Mon Sep 17 00:00:00 2001
 From: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
 Date: Thu, 7 Nov 2019 17:49:20 +0100
-Subject: [PATCH 017/198] x86: Enable RT also on 32bit
+Subject: [PATCH 017/196] x86: Enable RT also on 32bit
 
 Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
 Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
@@ -10,7 +10,7 @@ Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
  1 file changed, 1 insertion(+), 1 deletion(-)
 
 diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig
-index b9c1a286dddc..f774dc9f97f5 100644
+index 0b9640069679..282313172756 100644
 --- a/arch/x86/Kconfig
 +++ b/arch/x86/Kconfig
 @@ -28,7 +28,6 @@ config X86_64
@@ -21,7 +21,7 @@ index b9c1a286dddc..f774dc9f97f5 100644
  	select ARCH_USE_CMPXCHG_LOCKREF
  	select HAVE_ARCH_SOFT_DIRTY
  	select MODULES_USE_ELF_RELA
-@@ -118,6 +117,7 @@ config X86
+@@ -119,6 +118,7 @@ config X86
  	select ARCH_USES_CFI_TRAPS		if X86_64 && CFI_CLANG
  	select ARCH_SUPPORTS_LTO_CLANG
  	select ARCH_SUPPORTS_LTO_CLANG_THIN
@@ -30,5 +30,5 @@ index b9c1a286dddc..f774dc9f97f5 100644
  	select ARCH_USE_MEMTEST
  	select ARCH_USE_QUEUED_RWLOCKS
 -- 
-2.44.0
+2.45.1
 

buildroot-external/patches/linux/0018-sched-rt-Don-t-try-push-tasks-if-there-are-none.patch

@@ -1,7 +1,7 @@
-From ff02a1bafacf77d91927e5ac7556abfb0f598d34 Mon Sep 17 00:00:00 2001
+From db46aebeac180f931ba8691024ee135c07858583 Mon Sep 17 00:00:00 2001
 From: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
 Date: Tue, 1 Aug 2023 17:26:48 +0200
-Subject: [PATCH 018/198] sched/rt: Don't try push tasks if there are none.
+Subject: [PATCH 018/196] sched/rt: Don't try push tasks if there are none.
 
 I have a RT task X at a high priority and cyclictest on each CPU with
 lower priority than X's. If X is active and each CPU wakes their own
@@ -59,5 +59,5 @@ index 4ac36eb4cdee..acd1510e8d47 100644
  		rd->rto_cpu = -1;
  
 -- 
-2.44.0
+2.45.1
 

buildroot-external/patches/linux/0019-softirq-Use-a-dedicated-thread-for-timer-wakeups.patch

@@ -1,7 +1,7 @@
-From c5863cc5e1158351c86d38ac26d1d77066869be3 Mon Sep 17 00:00:00 2001
+From c7e01a04ed53f115cb3af580ed462135aa6b71b2 Mon Sep 17 00:00:00 2001
 From: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
 Date: Wed, 1 Dec 2021 17:41:09 +0100
-Subject: [PATCH 019/198] softirq: Use a dedicated thread for timer wakeups.
+Subject: [PATCH 019/196] softirq: Use a dedicated thread for timer wakeups.
 
 A timer/hrtimer softirq is raised in-IRQ context. With threaded
 interrupts enabled or on PREEMPT_RT this leads to waking the ksoftirqd
@@ -229,5 +229,5 @@ index 63a8ce7177dd..7cad6fe3c035 100644
  
  /*
 -- 
-2.44.0
+2.45.1
 

buildroot-external/patches/linux/0020-rcutorture-Also-force-sched-priority-to-timersd-on-b.patch

@@ -1,7 +1,7 @@
-From 51aa5b4ef3775ca0af1535f4b542b60fce91c8c8 Mon Sep 17 00:00:00 2001
+From 7c7aa2fd849aea3a7921810889b8d085bc57eed2 Mon Sep 17 00:00:00 2001
 From: Frederic Weisbecker <frederic@kernel.org>
 Date: Tue, 5 Apr 2022 03:07:51 +0200
-Subject: [PATCH 020/198] rcutorture: Also force sched priority to timersd on
+Subject: [PATCH 020/196] rcutorture: Also force sched priority to timersd on
  boosting test.
 
 ksoftirqd is statically boosted to the priority level right above the
@@ -76,5 +76,5 @@ index c29c30106eb8..1277abc94228 100644
  
  static unsigned int local_pending_timers(void)
 -- 
-2.44.0
+2.45.1
 

buildroot-external/patches/linux/0021-tick-Fix-timer-storm-since-introduction-of-timersd.patch

@@ -1,7 +1,7 @@
-From 0132df07a607045a682de87475561db9920cfca9 Mon Sep 17 00:00:00 2001
+From 9d79040c2c1c1f48b290b9cee53e2ad94fe595d3 Mon Sep 17 00:00:00 2001
 From: Frederic Weisbecker <frederic@kernel.org>
 Date: Tue, 5 Apr 2022 03:07:52 +0200
-Subject: [PATCH 021/198] tick: Fix timer storm since introduction of timersd
+Subject: [PATCH 021/196] tick: Fix timer storm since introduction of timersd
 
 If timers are pending while the tick is reprogrammed on nohz_mode, the
 next expiry is not armed to fire now, it is delayed one jiffy forward
@@ -111,5 +111,5 @@ index 55cbc49f70d1..1a0ed106b192 100644
  
  static ktime_t tick_nohz_next_event(struct tick_sched *ts, int cpu)
 -- 
-2.44.0
+2.45.1
 

buildroot-external/patches/linux/0022-softirq-Wake-ktimers-thread-also-in-softirq.patch

@@ -1,7 +1,7 @@
-From fbec5e78e9d2283fef8ff7252549bf51a1eaeb5e Mon Sep 17 00:00:00 2001
+From 0e32a7eea788ed21fcc70c30fd603fdc76b00ac8 Mon Sep 17 00:00:00 2001
 From: Junxiao Chang <junxiao.chang@intel.com>
 Date: Mon, 20 Feb 2023 09:12:20 +0100
-Subject: [PATCH 022/198] softirq: Wake ktimers thread also in softirq.
+Subject: [PATCH 022/196] softirq: Wake ktimers thread also in softirq.
 
 If the hrtimer is raised while a softirq is processed then it does not
 wake the corresponding ktimers thread. This is due to the optimisation in the
@@ -45,5 +45,5 @@ index a4d359e2c2b5..c2474cc4fa51 100644
  	tick_irq_exit();
  }
 -- 
-2.44.0
+2.45.1
 

buildroot-external/patches/linux/0023-zram-Replace-bit-spinlocks-with-spinlock_t-for-PREEM.patch

@@ -1,7 +1,7 @@
-From 39c5469af04f9921f0cb8533346802ea57d7d9ef Mon Sep 17 00:00:00 2001
+From 57cccbf81b65507bd497f519ccfa101c32b2754c Mon Sep 17 00:00:00 2001
 From: Mike Galbraith <umgwanakikbuti@gmail.com>
 Date: Thu, 31 Mar 2016 04:08:28 +0200
-Subject: [PATCH 023/198] zram: Replace bit spinlocks with spinlock_t for
+Subject: [PATCH 023/196] zram: Replace bit spinlocks with spinlock_t for
  PREEMPT_RT.
 
 The bit spinlock disables preemption. The spinlock_t lock becomes a sleeping
@@ -98,5 +98,5 @@ index ca7a15bd4845..e64eb607eb45 100644
  	ktime_t ac_time;
  #endif
 -- 
-2.44.0
+2.45.1
 

buildroot-external/patches/linux/0024-preempt-Put-preempt_enable-within-an-instrumentation.patch

@@ -1,7 +1,7 @@
-From 46baab63c3d5465d00a87f9b88c96049b58f9a62 Mon Sep 17 00:00:00 2001
+From a622600aa33f630c975961c557bc1b42173a7ff6 Mon Sep 17 00:00:00 2001
 From: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
 Date: Wed, 8 Mar 2023 16:29:38 +0100
-Subject: [PATCH 024/198] preempt: Put preempt_enable() within an
+Subject: [PATCH 024/196] preempt: Put preempt_enable() within an
  instrumentation*() section.
 
 Callers of preempt_enable() can be within an noinstr section leading to:
@@ -48,5 +48,5 @@ index 9aa6358a1a16..cd16f0330fba 100644
  
  #define preempt_check_resched() \
 -- 
-2.44.0
+2.45.1
 

buildroot-external/patches/linux/0025-sched-core-Provide-a-method-to-check-if-a-task-is-PI.patch

@@ -1,7 +1,7 @@
-From 3dac5e9dbebc192a58df61cb7701ae93e24fc653 Mon Sep 17 00:00:00 2001
+From 4ae4b72fbf397e10c5dd99e5a16d05738e7731f9 Mon Sep 17 00:00:00 2001
 From: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
 Date: Fri, 4 Aug 2023 13:30:37 +0200
-Subject: [PATCH 025/198] sched/core: Provide a method to check if a task is
+Subject: [PATCH 025/196] sched/core: Provide a method to check if a task is
  PI-boosted.
 
 Provide a method to check if a task inherited the priority from another
@@ -57,5 +57,5 @@ index d703c5427cf2..c731c53d6bfd 100644
   * yield - yield the current processor to other threads.
   *
 -- 
-2.44.0
+2.45.1
 

buildroot-external/patches/linux/0026-softirq-Add-function-to-preempt-serving-softirqs.patch

@@ -1,7 +1,7 @@
-From 397fb739b7dea6e8c472d112720511dad74d6253 Mon Sep 17 00:00:00 2001
+From d21a69c84700a97a5acdca48a49c6dab62fa93e6 Mon Sep 17 00:00:00 2001
 From: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
 Date: Fri, 4 Aug 2023 13:30:38 +0200
-Subject: [PATCH 026/198] softirq: Add function to preempt serving softirqs.
+Subject: [PATCH 026/196] softirq: Add function to preempt serving softirqs.
 
 Add a functionality for the softirq handler to preempt its current work
 if needed. The softirq core has no particular state. It reads and resets
@@ -63,5 +63,5 @@ index c2474cc4fa51..cae0ae2e2b0b 100644
   * Invoked from ksoftirqd_run() outside of the interrupt disabled section
   * to acquire the per CPU local lock for reentrancy protection.
 -- 
-2.44.0
+2.45.1
 

buildroot-external/patches/linux/0027-time-Allow-to-preempt-after-a-callback.patch

@@ -1,7 +1,7 @@
-From 3e49fb4989a74e55e5b1829a79f0d68d30b0b956 Mon Sep 17 00:00:00 2001
+From d23ffc79747b058efb25071c175fab84a6aef4a0 Mon Sep 17 00:00:00 2001
 From: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
 Date: Fri, 4 Aug 2023 13:30:39 +0200
-Subject: [PATCH 027/198] time: Allow to preempt after a callback.
+Subject: [PATCH 027/196] time: Allow to preempt after a callback.
 
 The TIMER_SOFTIRQ handler invokes timer callbacks of the expired timers.
 Before each invocation the timer_base::lock is dropped. The only lock
@@ -48,5 +48,5 @@ index 7cad6fe3c035..b3fbe97d1e34 100644
  		raw_spin_lock_irq(&base->lock);
  	}
 -- 
-2.44.0
+2.45.1
 

buildroot-external/patches/linux/0028-serial-core-Use-lock-wrappers.patch

@@ -1,7 +1,7 @@
-From 75dbd89b7e5564256b898403840f9539d444f2c2 Mon Sep 17 00:00:00 2001
+From 6c5fd34375840faafa52dc7fcdd2af0ae03f8dc9 Mon Sep 17 00:00:00 2001
 From: Thomas Gleixner <tglx@linutronix.de>
 Date: Thu, 14 Sep 2023 20:43:19 +0206
-Subject: [PATCH 028/198] serial: core: Use lock wrappers
+Subject: [PATCH 028/196] serial: core: Use lock wrappers
 MIME-Version: 1.0
 Content-Type: text/plain; charset=UTF-8
 Content-Transfer-Encoding: 8bit
@@ -94,5 +94,5 @@ index a7d5fa892be2..678409c47b88 100644
  #endif	/* CONFIG_MAGIC_SYSRQ_SERIAL */
  
 -- 
-2.44.0
+2.45.1
 

buildroot-external/patches/linux/0029-serial-21285-Use-port-lock-wrappers.patch

@@ -1,7 +1,7 @@
-From 6b27426c469aa7fc79fa5a11cde33d61ddb53619 Mon Sep 17 00:00:00 2001
+From 6deb325a028322c4a4e7b28cbd3b9ec25f80d6a0 Mon Sep 17 00:00:00 2001
 From: Thomas Gleixner <tglx@linutronix.de>
 Date: Thu, 14 Sep 2023 20:43:20 +0206
-Subject: [PATCH 029/198] serial: 21285: Use port lock wrappers
+Subject: [PATCH 029/196] serial: 21285: Use port lock wrappers
 
 When a serial port is used for kernel console output, then all
 modifications to the UART registers which are done from other contexts,
@@ -76,5 +76,5 @@ index d756fcc884cb..4de0c975ebdc 100644
  
  static const char *serial21285_type(struct uart_port *port)
 -- 
-2.44.0
+2.45.1
 

buildroot-external/patches/linux/0030-serial-8250_aspeed_vuart-Use-port-lock-wrappers.patch

@@ -1,7 +1,7 @@
-From d02b1946cdc46642addfbe651d817e86e57100fa Mon Sep 17 00:00:00 2001
+From cca56d164cac4c49bcfbfa86cb969ad793e86416 Mon Sep 17 00:00:00 2001
 From: Thomas Gleixner <tglx@linutronix.de>
 Date: Thu, 14 Sep 2023 20:43:21 +0206
-Subject: [PATCH 030/198] serial: 8250_aspeed_vuart: Use port lock wrappers
+Subject: [PATCH 030/196] serial: 8250_aspeed_vuart: Use port lock wrappers
 
 When a serial port is used for kernel console output, then all
 modifications to the UART registers which are done from other contexts,
@@ -62,5 +62,5 @@ index 4a9e71b2dbbc..021949f252f8 100644
  	lsr = serial_port_in(port, UART_LSR);
  
 -- 
-2.44.0
+2.45.1
 

buildroot-external/patches/linux/0031-serial-8250_bcm7271-Use-port-lock-wrappers.patch

@@ -1,7 +1,7 @@
-From 90d9cb7552d841a19d1d926e51135c8b8c549a98 Mon Sep 17 00:00:00 2001
+From 2db644ab7d72fad6b37df65a4851616312692caf Mon Sep 17 00:00:00 2001
 From: Thomas Gleixner <tglx@linutronix.de>
 Date: Thu, 14 Sep 2023 20:43:22 +0206
-Subject: [PATCH 031/198] serial: 8250_bcm7271: Use port lock wrappers
+Subject: [PATCH 031/196] serial: 8250_bcm7271: Use port lock wrappers
 
 When a serial port is used for kernel console output, then all
 modifications to the UART registers which are done from other contexts,
@@ -152,5 +152,5 @@ index aa5aff046756..ff0662c68725 100644
  
  	return 0;
 -- 
-2.44.0
+2.45.1
 

buildroot-external/patches/linux/0032-serial-8250-Use-port-lock-wrappers.patch

@@ -1,7 +1,7 @@
-From 3094c040b5193510b335425dac817f6420cbd506 Mon Sep 17 00:00:00 2001
+From 02148da4732ac5295f4b3285b970becd7b236da9 Mon Sep 17 00:00:00 2001
 From: Thomas Gleixner <tglx@linutronix.de>
 Date: Thu, 14 Sep 2023 20:43:23 +0206
-Subject: [PATCH 032/198] serial: 8250: Use port lock wrappers
+Subject: [PATCH 032/196] serial: 8250: Use port lock wrappers
 MIME-Version: 1.0
 Content-Type: text/plain; charset=UTF-8
 Content-Transfer-Encoding: 8bit
@@ -468,5 +468,5 @@ index a17803da83f8..cba5a1b1030f 100644
  
  static unsigned int probe_baud(struct uart_port *port)
 -- 
-2.44.0
+2.45.1
 

buildroot-external/patches/linux/0033-serial-8250_dma-Use-port-lock-wrappers.patch

@@ -1,7 +1,7 @@
-From b975b09242cda03dfa24bc5859e09dcf0719455e Mon Sep 17 00:00:00 2001
+From 18ff09af02da7e776929e679f07d525b9696cf02 Mon Sep 17 00:00:00 2001
 From: Thomas Gleixner <tglx@linutronix.de>
 Date: Thu, 14 Sep 2023 20:43:24 +0206
-Subject: [PATCH 033/198] serial: 8250_dma: Use port lock wrappers
+Subject: [PATCH 033/196] serial: 8250_dma: Use port lock wrappers
 MIME-Version: 1.0
 Content-Type: text/plain; charset=UTF-8
 Content-Transfer-Encoding: 8bit
@@ -81,5 +81,5 @@ index 7fa66501792d..8b30ca8fdd3f 100644
  
  int serial8250_tx_dma(struct uart_8250_port *p)
 -- 
-2.44.0
+2.45.1
 

buildroot-external/patches/linux/0034-serial-8250_dw-Use-port-lock-wrappers.patch

@@ -1,7 +1,7 @@
-From 8062148a5d7d2dc9fc70ae165872f28d378a4bbc Mon Sep 17 00:00:00 2001
+From 15d8a9cc288fb357d7e88d18443499acc485a8f3 Mon Sep 17 00:00:00 2001
 From: Thomas Gleixner <tglx@linutronix.de>
 Date: Thu, 14 Sep 2023 20:43:25 +0206
-Subject: [PATCH 034/198] serial: 8250_dw: Use port lock wrappers
+Subject: [PATCH 034/196] serial: 8250_dw: Use port lock wrappers
 MIME-Version: 1.0
 Content-Type: text/plain; charset=UTF-8
 Content-Transfer-Encoding: 8bit
@@ -70,5 +70,5 @@ index a1f2259cc9a9..53c284bb271d 100644
  		if (status & (UART_LSR_DR | UART_LSR_BI)) {
  			dw8250_writel_ext(p, RZN1_UART_RDMACR, 0);
 -- 
-2.44.0
+2.45.1
 

buildroot-external/patches/linux/0035-serial-8250_exar-Use-port-lock-wrappers.patch

@@ -1,7 +1,7 @@
-From 387ef2cfac20a43865414aedc210dc3164ca23b0 Mon Sep 17 00:00:00 2001
+From fcdc4f7bddd9c1296f49c8ab212556c65541f091 Mon Sep 17 00:00:00 2001
 From: Thomas Gleixner <tglx@linutronix.de>
 Date: Thu, 14 Sep 2023 20:43:26 +0206
-Subject: [PATCH 035/198] serial: 8250_exar: Use port lock wrappers
+Subject: [PATCH 035/196] serial: 8250_exar: Use port lock wrappers
 
 When a serial port is used for kernel console output, then all
 modifications to the UART registers which are done from other contexts,
@@ -53,5 +53,5 @@ index 4d20f3aa280c..342786064590 100644
  	return serial8250_do_startup(port);
  }
 -- 
-2.44.0
+2.45.1
 

buildroot-external/patches/linux/0036-serial-8250_fsl-Use-port-lock-wrappers.patch

@@ -1,7 +1,7 @@
-From 2ffed8195b499f3c084e339c606e3caedf0734ad Mon Sep 17 00:00:00 2001
+From e8d089bbe434c9b15ac5664ff08008dc7e0e3878 Mon Sep 17 00:00:00 2001
 From: Thomas Gleixner <tglx@linutronix.de>
 Date: Thu, 14 Sep 2023 20:43:27 +0206
-Subject: [PATCH 036/198] serial: 8250_fsl: Use port lock wrappers
+Subject: [PATCH 036/196] serial: 8250_fsl: Use port lock wrappers
 
 When a serial port is used for kernel console output, then all
 modifications to the UART registers which are done from other contexts,
@@ -64,5 +64,5 @@ index 6af4e1c1210a..f522eb5026c9 100644
  	}
  
 -- 
-2.44.0
+2.45.1
 

buildroot-external/patches/linux/0037-serial-8250_mtk-Use-port-lock-wrappers.patch

@@ -1,7 +1,7 @@
-From a6146c1416cf4ac69b8f86a70c567bd9c5f59b37 Mon Sep 17 00:00:00 2001
+From c3cdebecf01d8cd7e7421441fa6a6cc29bef4ad0 Mon Sep 17 00:00:00 2001
 From: Thomas Gleixner <tglx@linutronix.de>
 Date: Thu, 14 Sep 2023 20:43:28 +0206
-Subject: [PATCH 037/198] serial: 8250_mtk: Use port lock wrappers
+Subject: [PATCH 037/196] serial: 8250_mtk: Use port lock wrappers
 
 When a serial port is used for kernel console output, then all
 modifications to the UART registers which are done from other contexts,
@@ -78,5 +78,5 @@ index 74da5676ce67..23457daae8a1 100644
  	if (tty_termios_baud_rate(termios))
  		tty_termios_encode_baud_rate(termios, baud, baud);
 -- 
-2.44.0
+2.45.1
 

buildroot-external/patches/linux/0038-serial-8250_omap-Use-port-lock-wrappers.patch

@@ -1,7 +1,7 @@
-From a3c3a5aa6741a585fb4bd88a812667d3c8090e59 Mon Sep 17 00:00:00 2001
+From f9959f0ba207be470f5be435892eef3ae7ce6f76 Mon Sep 17 00:00:00 2001
 From: Thomas Gleixner <tglx@linutronix.de>
 Date: Thu, 14 Sep 2023 20:43:29 +0206
-Subject: [PATCH 038/198] serial: 8250_omap: Use port lock wrappers
+Subject: [PATCH 038/196] serial: 8250_omap: Use port lock wrappers
 
 When a serial port is used for kernel console output, then all
 modifications to the UART registers which are done from other contexts,
@@ -237,5 +237,5 @@ index 346167afe9e1..db5519ce0192 100644
  
  	priv->latency = priv->calc_latency;
 -- 
-2.44.0
+2.45.1
 

buildroot-external/patches/linux/0039-serial-8250_pci1xxxx-Use-port-lock-wrappers.patch

@@ -1,7 +1,7 @@
-From dcbb92ff385851014ce2adf8fc88f539bab834da Mon Sep 17 00:00:00 2001
+From 4ebaf505e5fbbb2afb5bd4f5f48adb577fb39315 Mon Sep 17 00:00:00 2001
 From: Thomas Gleixner <tglx@linutronix.de>
 Date: Thu, 14 Sep 2023 20:43:30 +0206
-Subject: [PATCH 039/198] serial: 8250_pci1xxxx: Use port lock wrappers
+Subject: [PATCH 039/196] serial: 8250_pci1xxxx: Use port lock wrappers
 
 When a serial port is used for kernel console output, then all
 modifications to the UART registers which are done from other contexts,
@@ -67,5 +67,5 @@ index a3b25779d921..53e238c8cc89 100644
  	mutex_unlock(&tport->mutex);
  }
 -- 
-2.44.0
+2.45.1
 

buildroot-external/patches/linux/0040-serial-altera_jtaguart-Use-port-lock-wrappers.patch

@@ -1,7 +1,7 @@
-From 2e16f769f7b52fd39a09514d755ddacf44fcda84 Mon Sep 17 00:00:00 2001
+From 6fbcb9f97af265fa1c92e1f95ef0530bb0a5f204 Mon Sep 17 00:00:00 2001
 From: Thomas Gleixner <tglx@linutronix.de>
 Date: Thu, 14 Sep 2023 20:43:31 +0206
-Subject: [PATCH 040/198] serial: altera_jtaguart: Use port lock wrappers
+Subject: [PATCH 040/196] serial: altera_jtaguart: Use port lock wrappers
 
 When a serial port is used for kernel console output, then all
 modifications to the UART registers which are done from other contexts,
@@ -134,5 +134,5 @@ index 5fab4c978891..7090b251dd4d 100644
  #endif
  
 -- 
-2.44.0
+2.45.1
 

buildroot-external/patches/linux/0041-serial-altera_uart-Use-port-lock-wrappers.patch

@@ -1,7 +1,7 @@
-From e5557701fa9a5373b8f6b511dbd3fbf3ac51534a Mon Sep 17 00:00:00 2001
+From 112dc89a8aea09edaed7b3226b5be6a9b8242141 Mon Sep 17 00:00:00 2001
 From: Thomas Gleixner <tglx@linutronix.de>
 Date: Thu, 14 Sep 2023 20:43:32 +0206
-Subject: [PATCH 041/198] serial: altera_uart: Use port lock wrappers
+Subject: [PATCH 041/196] serial: altera_uart: Use port lock wrappers
 
 When a serial port is used for kernel console output, then all
 modifications to the UART registers which are done from other contexts,
@@ -117,5 +117,5 @@ index a9c41942190c..77835ac68df2 100644
  	if (port->irq)
  		free_irq(port->irq, port);
 -- 
-2.44.0
+2.45.1
 

buildroot-external/patches/linux/0042-serial-amba-pl010-Use-port-lock-wrappers.patch

@@ -1,7 +1,7 @@
-From a575d78c4d0b45758ae1969dc75a4a49e2da6cf0 Mon Sep 17 00:00:00 2001
+From d8f628e5aa4ab5114ef77d8506c3bdfd6f7e8b5d Mon Sep 17 00:00:00 2001
 From: Thomas Gleixner <tglx@linutronix.de>
 Date: Thu, 14 Sep 2023 20:43:33 +0206
-Subject: [PATCH 042/198] serial: amba-pl010: Use port lock wrappers
+Subject: [PATCH 042/196] serial: amba-pl010: Use port lock wrappers
 
 When a serial port is used for kernel console output, then all
 modifications to the UART registers which are done from other contexts,
@@ -113,5 +113,5 @@ index b5a7404cbacb..eabbf8afc9b5 100644
  	}
  }
 -- 
-2.44.0
+2.45.1
 

buildroot-external/patches/linux/0043-serial-amba-pl011-Use-port-lock-wrappers.patch

@@ -1,7 +1,7 @@
-From d9b7b888b11585d0af93ed044d8fdf2fa19db277 Mon Sep 17 00:00:00 2001
+From 7ee23cef36f815349c95b29497c35bda97eba2c4 Mon Sep 17 00:00:00 2001
 From: Thomas Gleixner <tglx@linutronix.de>
 Date: Thu, 14 Sep 2023 20:43:34 +0206
-Subject: [PATCH 043/198] serial: amba-pl011: Use port lock wrappers
+Subject: [PATCH 043/196] serial: amba-pl011: Use port lock wrappers
 
 When a serial port is used for kernel console output, then all
 modifications to the UART registers which are done from other contexts,
@@ -328,5 +328,5 @@ index 362bbcdece0d..16c770311069 100644
  
  	clk_disable(uap->clk);
 -- 
-2.44.0
+2.45.1
 

buildroot-external/patches/linux/0044-serial-apb-Use-port-lock-wrappers.patch

@@ -1,7 +1,7 @@
-From ad2560897d66415d623f218e9a032e7200197264 Mon Sep 17 00:00:00 2001
+From c85c7c75c6c5c59ddd219cc1f9230d60cf19d0b9 Mon Sep 17 00:00:00 2001
 From: Thomas Gleixner <tglx@linutronix.de>
 Date: Thu, 14 Sep 2023 20:43:35 +0206
-Subject: [PATCH 044/198] serial: apb: Use port lock wrappers
+Subject: [PATCH 044/196] serial: apb: Use port lock wrappers
 
 When a serial port is used for kernel console output, then all
 modifications to the UART registers which are done from other contexts,
@@ -77,5 +77,5 @@ index d3cb341f2c55..364599f256db 100644
  
  static const char *apbuart_type(struct uart_port *port)
 -- 
-2.44.0
+2.45.1
 

buildroot-external/patches/linux/0045-serial-ar933x-Use-port-lock-wrappers.patch

@@ -1,7 +1,7 @@
-From c7e0556406938d6434991aeff87e85124c0c5a16 Mon Sep 17 00:00:00 2001
+From 19f8ba43023ff2ba22f8d92d71bd1ac7705ee6cf Mon Sep 17 00:00:00 2001
 From: Thomas Gleixner <tglx@linutronix.de>
 Date: Thu, 14 Sep 2023 20:43:36 +0206
-Subject: [PATCH 045/198] serial: ar933x: Use port lock wrappers
+Subject: [PATCH 045/196] serial: ar933x: Use port lock wrappers
 
 When a serial port is used for kernel console output, then all
 modifications to the UART registers which are done from other contexts,
@@ -145,5 +145,5 @@ index 924c1a89347c..ffd234673177 100644
  	local_irq_restore(flags);
  }
 -- 
-2.44.0
+2.45.1
 

buildroot-external/patches/linux/0046-serial-arc_uart-Use-port-lock-wrappers.patch

@@ -1,7 +1,7 @@
-From 5a0e18332bea1b6453bd4e806c6504138127371d Mon Sep 17 00:00:00 2001
+From 0cd89f0ef7ea21aa9769ef5a405ec8c142685c7b Mon Sep 17 00:00:00 2001
 From: Thomas Gleixner <tglx@linutronix.de>
 Date: Thu, 14 Sep 2023 20:43:37 +0206
-Subject: [PATCH 046/198] serial: arc_uart: Use port lock wrappers
+Subject: [PATCH 046/196] serial: arc_uart: Use port lock wrappers
 
 When a serial port is used for kernel console output, then all
 modifications to the UART registers which are done from other contexts,
@@ -98,5 +98,5 @@ index ad4ae19b6ce3..1aa5b2b49c26 100644
  
  static struct console arc_console = {
 -- 
-2.44.0
+2.45.1
 

buildroot-external/patches/linux/0047-serial-atmel-Use-port-lock-wrappers.patch

@@ -1,7 +1,7 @@
-From f84225dbdb7cd9ef908795d44a815b98818b9e43 Mon Sep 17 00:00:00 2001
+From c5aed341415af407a29c6a9376b0a960b455f91c Mon Sep 17 00:00:00 2001
 From: Thomas Gleixner <tglx@linutronix.de>
 Date: Thu, 14 Sep 2023 20:43:38 +0206
-Subject: [PATCH 047/198] serial: atmel: Use port lock wrappers
+Subject: [PATCH 047/196] serial: atmel: Use port lock wrappers
 
 When a serial port is used for kernel console output, then all
 modifications to the UART registers which are done from other contexts,
@@ -120,5 +120,5 @@ index 88cdafa5ac54..1946fafc3f3e 100644
  	}
  }
 -- 
-2.44.0
+2.45.1
 

buildroot-external/patches/linux/0048-serial-bcm63xx-uart-Use-port-lock-wrappers.patch

@@ -1,7 +1,7 @@
-From 254504b36554b8987691ad1cd81bbb8b798eba0c Mon Sep 17 00:00:00 2001
+From fd2f440a4fa98bdd61c5344811a8b3c53de0e2b4 Mon Sep 17 00:00:00 2001
 From: Thomas Gleixner <tglx@linutronix.de>
 Date: Thu, 14 Sep 2023 20:43:39 +0206
-Subject: [PATCH 048/198] serial: bcm63xx-uart: Use port lock wrappers
+Subject: [PATCH 048/196] serial: bcm63xx-uart: Use port lock wrappers
 
 When a serial port is used for kernel console output, then all
 modifications to the UART registers which are done from other contexts,
@@ -129,5 +129,5 @@ index 0dd8cceb837c..4a08fd5ee61b 100644
  }
  
 -- 
-2.44.0
+2.45.1
 

buildroot-external/patches/linux/0049-serial-cpm_uart-Use-port-lock-wrappers.patch

@@ -1,7 +1,7 @@
-From 3c86efdaa2738e88dd9e7f55652954a93723e501 Mon Sep 17 00:00:00 2001
+From 5428bc92da81ac03fa3530a74ba51e833bbbac01 Mon Sep 17 00:00:00 2001
 From: Thomas Gleixner <tglx@linutronix.de>
 Date: Thu, 14 Sep 2023 20:43:40 +0206
-Subject: [PATCH 049/198] serial: cpm_uart: Use port lock wrappers
+Subject: [PATCH 049/196] serial: cpm_uart: Use port lock wrappers
 
 When a serial port is used for kernel console output, then all
 modifications to the UART registers which are done from other contexts,
@@ -71,5 +71,5 @@ index 626423022d62..be4af6eda4c2 100644
  }
  
 -- 
-2.44.0
+2.45.1
 

buildroot-external/patches/linux/0050-serial-digicolor-Use-port-lock-wrappers.patch

@@ -1,7 +1,7 @@
-From 7bc5b3a4befaa2219dfd5d7c5c069d563afa0a81 Mon Sep 17 00:00:00 2001
+From 64f3446cd9cbba31faf719284c85750b28f22c5d Mon Sep 17 00:00:00 2001
 From: Thomas Gleixner <tglx@linutronix.de>
 Date: Thu, 14 Sep 2023 20:43:41 +0206
-Subject: [PATCH 050/198] serial: digicolor: Use port lock wrappers
+Subject: [PATCH 050/196] serial: digicolor: Use port lock wrappers
 
 When a serial port is used for kernel console output, then all
 modifications to the UART registers which are done from other contexts,
@@ -114,5 +114,5 @@ index 128b5479e813..5004125f3045 100644
  	/* Wait for transmitter to become empty */
  	do {
 -- 
-2.44.0
+2.45.1
 

buildroot-external/patches/linux/0051-serial-dz-Use-port-lock-wrappers.patch

@@ -1,7 +1,7 @@
-From 0ac36a1ae3846dfd22081abfd17040d1fd8fcaae Mon Sep 17 00:00:00 2001
+From e9cac43e4c052afc1b2a76f9e1c6c5f44fbea884 Mon Sep 17 00:00:00 2001
 From: Thomas Gleixner <tglx@linutronix.de>
 Date: Thu, 14 Sep 2023 20:43:42 +0206
-Subject: [PATCH 051/198] serial: dz: Use port lock wrappers
+Subject: [PATCH 051/196] serial: dz: Use port lock wrappers
 
 When a serial port is used for kernel console output, then all
 modifications to the UART registers which are done from other contexts,
@@ -162,5 +162,5 @@ index 667f52e83277..6df7af9edc1c 100644
  	do {
  		trdy = dz_in(dport, DZ_CSR);
 -- 
-2.44.0
+2.45.1
 

buildroot-external/patches/linux/0052-serial-linflexuart-Use-port-lock-wrappers.patch

@@ -1,7 +1,7 @@
-From 1828619da9181f91be6adbe6604899385154c4ce Mon Sep 17 00:00:00 2001
+From c4a981074cc232c31fd8a56c5a2665f7321a3320 Mon Sep 17 00:00:00 2001
 From: Thomas Gleixner <tglx@linutronix.de>
 Date: Thu, 14 Sep 2023 20:43:43 +0206
-Subject: [PATCH 052/198] serial: linflexuart: Use port lock wrappers
+Subject: [PATCH 052/196] serial: linflexuart: Use port lock wrappers
 
 When a serial port is used for kernel console output, then all
 modifications to the UART registers which are done from other contexts,
@@ -144,5 +144,5 @@ index 249cb380c3c6..7fa809a405e8 100644
  
  /*
 -- 
-2.44.0
+2.45.1
 

buildroot-external/patches/linux/0053-serial-fsl_lpuart-Use-port-lock-wrappers.patch

@@ -1,7 +1,7 @@
-From ddae91de984cb3f971fb7456e94c9fc295a49bbb Mon Sep 17 00:00:00 2001
+From 2e2106c3ad0310075bb39b7480ef99896684d657 Mon Sep 17 00:00:00 2001
 From: Thomas Gleixner <tglx@linutronix.de>
 Date: Thu, 14 Sep 2023 20:43:44 +0206
-Subject: [PATCH 053/198] serial: fsl_lpuart: Use port lock wrappers
+Subject: [PATCH 053/196] serial: fsl_lpuart: Use port lock wrappers
 
 When a serial port is used for kernel console output, then all
 modifications to the UART registers which are done from other contexts,
@@ -390,5 +390,5 @@ index 385b41275e8b..71d0cbd74807 100644
  			dmaengine_terminate_sync(sport->dma_tx_chan);
  		}
 -- 
-2.44.0
+2.45.1
 

buildroot-external/patches/linux/0054-serial-icom-Use-port-lock-wrappers.patch

@@ -1,7 +1,7 @@
-From 202602b9b6e46d9c37567e23999aac958fd162a8 Mon Sep 17 00:00:00 2001
+From 828b820890ade060806490d0273c0dcffa63cc9b Mon Sep 17 00:00:00 2001
 From: Thomas Gleixner <tglx@linutronix.de>
 Date: Thu, 14 Sep 2023 20:43:45 +0206
-Subject: [PATCH 054/198] serial: icom: Use port lock wrappers
+Subject: [PATCH 054/196] serial: icom: Use port lock wrappers
 
 When a serial port is used for kernel console output, then all
 modifications to the UART registers which are done from other contexts,
@@ -152,5 +152,5 @@ index 819f957b6b84..a75eafbcbea3 100644
  
  static const char *icom_type(struct uart_port *port)
 -- 
-2.44.0
+2.45.1
 

buildroot-external/patches/linux/0055-serial-imx-Use-port-lock-wrappers.patch

@@ -1,7 +1,7 @@
-From 63366d15914d5b5eb32438f1b7a5fc8be59e0dd9 Mon Sep 17 00:00:00 2001
+From 4f36fa6b8c6cbaa11a181bfb618fd76a1761223b Mon Sep 17 00:00:00 2001
 From: Thomas Gleixner <tglx@linutronix.de>
 Date: Thu, 14 Sep 2023 20:43:46 +0206
-Subject: [PATCH 055/198] serial: imx: Use port lock wrappers
+Subject: [PATCH 055/196] serial: imx: Use port lock wrappers
 
 When a serial port is used for kernel console output, then all
 modifications to the UART registers which are done from other contexts,
@@ -355,5 +355,5 @@ index c77831e91ec2..66420a992539 100644
  
  static void imx_uart_enable_wakeup(struct imx_port *sport, bool on)
 -- 
-2.44.0
+2.45.1
 

buildroot-external/patches/linux/0056-serial-ip22zilog-Use-port-lock-wrappers.patch

@@ -1,7 +1,7 @@
-From 4c21b6f6ec1d1d44387e05e35d0e32e435421ca6 Mon Sep 17 00:00:00 2001
+From 228135349ab2ea8fa33100caf52ff52932c2c94a Mon Sep 17 00:00:00 2001
 From: Thomas Gleixner <tglx@linutronix.de>
 Date: Thu, 14 Sep 2023 20:43:47 +0206
-Subject: [PATCH 056/198] serial: ip22zilog: Use port lock wrappers
+Subject: [PATCH 056/196] serial: ip22zilog: Use port lock wrappers
 
 When a serial port is used for kernel console output, then all
 modifications to the UART registers which are done from other contexts,
@@ -186,5 +186,5 @@ index 845ff706bc59..320b29cd4683 100644
  	if (options)
  		uart_parse_options(options, &baud, &parity, &bits, &flow);
 -- 
-2.44.0
+2.45.1
 

buildroot-external/patches/linux/0057-serial-jsm-Use-port-lock-wrappers.patch

@@ -1,7 +1,7 @@
-From 9d49519691d85841c7bbec5a1b5420d8bb5c2aab Mon Sep 17 00:00:00 2001
+From e545c49e2e642484da7b702385855351b2351656 Mon Sep 17 00:00:00 2001
 From: Thomas Gleixner <tglx@linutronix.de>
 Date: Thu, 14 Sep 2023 20:43:48 +0206
-Subject: [PATCH 057/198] serial: jsm: Use port lock wrappers
+Subject: [PATCH 057/196] serial: jsm: Use port lock wrappers
 
 When a serial port is used for kernel console output, then all
 modifications to the UART registers which are done from other contexts,
@@ -127,5 +127,5 @@ index 222afc270c88..ce0fef7e2c66 100644
  
  static const char *jsm_tty_type(struct uart_port *port)
 -- 
-2.44.0
+2.45.1
 

buildroot-external/patches/linux/0058-serial-liteuart-Use-port-lock-wrappers.patch

@@ -1,7 +1,7 @@
-From 792390c8e24a3be75621990da07994b349ed81bf Mon Sep 17 00:00:00 2001
+From 34a07947702adc2a04e67a62a8524918a41741d2 Mon Sep 17 00:00:00 2001
 From: Thomas Gleixner <tglx@linutronix.de>
 Date: Thu, 14 Sep 2023 20:43:49 +0206
-Subject: [PATCH 058/198] serial: liteuart: Use port lock wrappers
+Subject: [PATCH 058/196] serial: liteuart: Use port lock wrappers
 
 When a serial port is used for kernel console output, then all
 modifications to the UART registers which are done from other contexts,
@@ -111,5 +111,5 @@ index d881cdd2a58f..a25ab1efe38f 100644
  
  static int liteuart_console_setup(struct console *co, char *options)
 -- 
-2.44.0
+2.45.1
 

buildroot-external/patches/linux/0059-serial-lpc32xx_hs-Use-port-lock-wrappers.patch

@@ -1,7 +1,7 @@
-From 4745341be24af5281b708ec6b7c62d92eadf43e8 Mon Sep 17 00:00:00 2001
+From d0705514f666cc1f94f6e14d6e90da9e292ce300 Mon Sep 17 00:00:00 2001
 From: Thomas Gleixner <tglx@linutronix.de>
 Date: Thu, 14 Sep 2023 20:43:50 +0206
-Subject: [PATCH 059/198] serial: lpc32xx_hs: Use port lock wrappers
+Subject: [PATCH 059/196] serial: lpc32xx_hs: Use port lock wrappers
 
 When a serial port is used for kernel console output, then all
 modifications to the UART registers which are done from other contexts,
@@ -149,5 +149,5 @@ index b38fe4728c26..5149a947b7fe 100644
  	/* Don't rewrite B0 */
  	if (tty_termios_baud_rate(termios))
 -- 
-2.44.0
+2.45.1
 

buildroot-external/patches/linux/0060-serial-ma35d1-Use-port-lock-wrappers.patch

@@ -1,7 +1,7 @@
-From df848f9ebfac6dd30358fbdc179b911a60c0ec5b Mon Sep 17 00:00:00 2001
+From e453078fee203a5b4b42d8a09d914275e860a130 Mon Sep 17 00:00:00 2001
 From: Thomas Gleixner <tglx@linutronix.de>
 Date: Thu, 14 Sep 2023 20:43:51 +0206
-Subject: [PATCH 060/198] serial: ma35d1: Use port lock wrappers
+Subject: [PATCH 060/196] serial: ma35d1: Use port lock wrappers
 
 When a serial port is used for kernel console output, then all
 modifications to the UART registers which are done from other contexts,
@@ -118,5 +118,5 @@ index 69da24565b99..73910c54d6be 100644
  
  static int __init ma35d1serial_console_setup(struct console *co, char *options)
 -- 
-2.44.0
+2.45.1
 

buildroot-external/patches/linux/0061-serial-mcf-Use-port-lock-wrappers.patch

@@ -1,7 +1,7 @@
-From 06baf2767bd53167bc4c02da5971c98e12c13397 Mon Sep 17 00:00:00 2001
+From 27398ce8a64a6543cd10239422009eb3fbfe822c Mon Sep 17 00:00:00 2001
 From: Thomas Gleixner <tglx@linutronix.de>
 Date: Thu, 14 Sep 2023 20:43:52 +0206
-Subject: [PATCH 061/198] serial: mcf: Use port lock wrappers
+Subject: [PATCH 061/196] serial: mcf: Use port lock wrappers
 
 When a serial port is used for kernel console output, then all
 modifications to the UART registers which are done from other contexts,
@@ -128,5 +128,5 @@ index 1666ce012e5e..91b15243f6c6 100644
  	return ret;
  }
 -- 
-2.44.0
+2.45.1
 

buildroot-external/patches/linux/0062-serial-men_z135_uart-Use-port-lock-wrappers.patch

@@ -1,7 +1,7 @@
-From 796bb19b5478aa51ebb6ac0fdc39186d59759b27 Mon Sep 17 00:00:00 2001
+From 7b8486ccc60f05c6e2b718fa56672c824870f049 Mon Sep 17 00:00:00 2001
 From: Thomas Gleixner <tglx@linutronix.de>
 Date: Thu, 14 Sep 2023 20:43:53 +0206
-Subject: [PATCH 062/198] serial: men_z135_uart: Use port lock wrappers
+Subject: [PATCH 062/196] serial: men_z135_uart: Use port lock wrappers
 
 When a serial port is used for kernel console output, then all
 modifications to the UART registers which are done from other contexts,
@@ -77,5 +77,5 @@ index d2502aaa3e8c..8048fa542fc4 100644
  
  static const char *men_z135_type(struct uart_port *port)
 -- 
-2.44.0
+2.45.1
 

buildroot-external/patches/linux/0063-serial-meson-Use-port-lock-wrappers.patch

@@ -1,7 +1,7 @@
-From 7b6095010a23aa78ad87b589ff39473ad892011a Mon Sep 17 00:00:00 2001
+From 1edad7f70bc76dd3ef5d83cbee48b4e54fbc4910 Mon Sep 17 00:00:00 2001
 From: Thomas Gleixner <tglx@linutronix.de>
 Date: Thu, 14 Sep 2023 20:43:54 +0206
-Subject: [PATCH 063/198] serial: meson: Use port lock wrappers
+Subject: [PATCH 063/196] serial: meson: Use port lock wrappers
 
 When a serial port is used for kernel console output, then all
 modifications to the UART registers which are done from other contexts,
@@ -169,5 +169,5 @@ index 9388b9ddea3b..4c1d2089a0bb 100644
  }
  
 -- 
-2.44.0
+2.45.1
 

buildroot-external/patches/linux/0064-serial-milbeaut_usio-Use-port-lock-wrappers.patch

@@ -1,7 +1,7 @@
-From e457979d570981b53b0b85d59f0a6bb2cbe3853b Mon Sep 17 00:00:00 2001
+From 1bab933f782b64598058a9f33fd517fef8d39761 Mon Sep 17 00:00:00 2001
 From: Thomas Gleixner <tglx@linutronix.de>
 Date: Thu, 14 Sep 2023 20:43:55 +0206
-Subject: [PATCH 064/198] serial: milbeaut_usio: Use port lock wrappers
+Subject: [PATCH 064/196] serial: milbeaut_usio: Use port lock wrappers
 
 When a serial port is used for kernel console output, then all
 modifications to the UART registers which are done from other contexts,
@@ -102,5 +102,5 @@ index 70a910085e93..db3b81f2aa57 100644
  
  static const char *mlb_usio_type(struct uart_port *port)
 -- 
-2.44.0
+2.45.1
 

buildroot-external/patches/linux/0065-serial-mpc52xx-Use-port-lock-wrappers.patch

@@ -1,7 +1,7 @@
-From 20988af9eed091714c307e7a6d080cf51ef874b1 Mon Sep 17 00:00:00 2001
+From b2d881323fc941835a59fcb7b04229063ed038e0 Mon Sep 17 00:00:00 2001
 From: Thomas Gleixner <tglx@linutronix.de>
 Date: Thu, 14 Sep 2023 20:43:56 +0206
-Subject: [PATCH 065/198] serial: mpc52xx: Use port lock wrappers
+Subject: [PATCH 065/196] serial: mpc52xx: Use port lock wrappers
 
 When a serial port is used for kernel console output, then all
 modifications to the UART registers which are done from other contexts,
@@ -90,5 +90,5 @@ index 916507b8f31d..a252465e745f 100644
  	return ret;
  }
 -- 
-2.44.0
+2.45.1
 

buildroot-external/patches/linux/0066-serial-mps2-uart-Use-port-lock-wrappers.patch

@@ -1,7 +1,7 @@
-From f3a08238f90b3ada6988a984fa2fade2bf26f007 Mon Sep 17 00:00:00 2001
+From c14a3600c3dd52147c1a57aa143ec9990b574e9a Mon Sep 17 00:00:00 2001
 From: Thomas Gleixner <tglx@linutronix.de>
 Date: Thu, 14 Sep 2023 20:43:57 +0206
-Subject: [PATCH 066/198] serial: mps2-uart: Use port lock wrappers
+Subject: [PATCH 066/196] serial: mps2-uart: Use port lock wrappers
 
 When a serial port is used for kernel console output, then all
 modifications to the UART registers which are done from other contexts,
@@ -104,5 +104,5 @@ index ea5a7911cb15..2a4c09f3a834 100644
  	if (tty_termios_baud_rate(termios))
  		tty_termios_encode_baud_rate(termios, baud, baud);
 -- 
-2.44.0
+2.45.1
 

buildroot-external/patches/linux/0067-serial-msm-Use-port-lock-wrappers.patch

@@ -1,7 +1,7 @@
-From 9b9a28a033ae863d23d071bba13f6c34d154e3bb Mon Sep 17 00:00:00 2001
+From e3a5c39a1a636317789826af30b17b6246765ead Mon Sep 17 00:00:00 2001
 From: Thomas Gleixner <tglx@linutronix.de>
 Date: Thu, 14 Sep 2023 20:43:58 +0206
-Subject: [PATCH 067/198] serial: msm: Use port lock wrappers
+Subject: [PATCH 067/196] serial: msm: Use port lock wrappers
 
 When a serial port is used for kernel console output, then all
 modifications to the UART registers which are done from other contexts,
@@ -186,5 +186,5 @@ index 90953e679e38..597264b546fd 100644
  	local_irq_restore(flags);
  }
 -- 
-2.44.0
+2.45.1
 

buildroot-external/patches/linux/0068-serial-mvebu-uart-Use-port-lock-wrappers.patch

@@ -1,7 +1,7 @@
-From 2afc44181b5734d06a4719ac7d4b12264dce9deb Mon Sep 17 00:00:00 2001
+From 5a1d9e8fd848e7897e845f875a9e3ea452ee7bd6 Mon Sep 17 00:00:00 2001
 From: Thomas Gleixner <tglx@linutronix.de>
 Date: Thu, 14 Sep 2023 20:43:59 +0206
-Subject: [PATCH 068/198] serial: mvebu-uart: Use port lock wrappers
+Subject: [PATCH 068/196] serial: mvebu-uart: Use port lock wrappers
 
 When a serial port is used for kernel console output, then all
 modifications to the UART registers which are done from other contexts,
@@ -109,5 +109,5 @@ index ea924e9b913b..0255646bc175 100644
  
  static int mvebu_uart_console_setup(struct console *co, char *options)
 -- 
-2.44.0
+2.45.1
 

buildroot-external/patches/linux/0069-serial-omap-Use-port-lock-wrappers.patch

@@ -1,7 +1,7 @@
-From c6aeabe6504b5812d8063d40f9c34010a160fef0 Mon Sep 17 00:00:00 2001
+From 0ab202f454a3d83a598711bf7799e6765d40f155 Mon Sep 17 00:00:00 2001
 From: Thomas Gleixner <tglx@linutronix.de>
 Date: Thu, 14 Sep 2023 20:44:00 +0206
-Subject: [PATCH 069/198] serial: omap: Use port lock wrappers
+Subject: [PATCH 069/196] serial: omap: Use port lock wrappers
 
 When a serial port is used for kernel console output, then all
 modifications to the UART registers which are done from other contexts,
@@ -181,5 +181,5 @@ index 135a838f517a..f4c6ff806465 100644
  }
  
 -- 
-2.44.0
+2.45.1
 

buildroot-external/patches/linux/0070-serial-owl-Use-port-lock-wrappers.patch

@@ -1,7 +1,7 @@
-From aed618ec8041d94adf724a33348ac7f6ed5d2f52 Mon Sep 17 00:00:00 2001
+From bfaaddbadbff583fdc536e3fe6ed4c744ec580dd Mon Sep 17 00:00:00 2001
 From: Thomas Gleixner <tglx@linutronix.de>
 Date: Thu, 14 Sep 2023 20:44:01 +0206
-Subject: [PATCH 070/198] serial: owl: Use port lock wrappers
+Subject: [PATCH 070/196] serial: owl: Use port lock wrappers
 
 When a serial port is used for kernel console output, then all
 modifications to the UART registers which are done from other contexts,
@@ -148,5 +148,5 @@ index e99970a9437f..919f5e5aa0f1 100644
  	local_irq_restore(flags);
  }
 -- 
-2.44.0
+2.45.1
 

buildroot-external/patches/linux/0071-serial-pch-Use-port-lock-wrappers.patch

@@ -1,7 +1,7 @@
-From 6052105716d7de512abe91f59e0bcbfb1d3e5978 Mon Sep 17 00:00:00 2001
+From 7e9f1690bf3dd4a42b27d94951a42fa85a95fc5a Mon Sep 17 00:00:00 2001
 From: Thomas Gleixner <tglx@linutronix.de>
 Date: Thu, 14 Sep 2023 20:44:02 +0206
-Subject: [PATCH 071/198] serial: pch: Use port lock wrappers
+Subject: [PATCH 071/196] serial: pch: Use port lock wrappers
 
 When a serial port is used for kernel console output, then all
 modifications to the UART registers which are done from other contexts,
@@ -81,5 +81,5 @@ index cc83b772b7ca..436cc6d52a11 100644
  		spin_unlock(&priv->lock);
  	local_irq_restore(flags);
 -- 
-2.44.0
+2.45.1
 

buildroot-external/patches/linux/0072-serial-pic32-Use-port-lock-wrappers.patch

@@ -1,7 +1,7 @@
-From a3e16abc02be270ef158758fb129e8be54e40577 Mon Sep 17 00:00:00 2001
+From 8ff603444ac36cb84658125b311387497a651259 Mon Sep 17 00:00:00 2001
 From: Thomas Gleixner <tglx@linutronix.de>
 Date: Thu, 14 Sep 2023 20:44:03 +0206
-Subject: [PATCH 072/198] serial: pic32: Use port lock wrappers
+Subject: [PATCH 072/196] serial: pic32: Use port lock wrappers
 
 When a serial port is used for kernel console output, then all
 modifications to the UART registers which are done from other contexts,
@@ -119,5 +119,5 @@ index e308d5022b3f..3a95bf5d55d3 100644
  
  /* serial core request to claim uart iomem */
 -- 
-2.44.0
+2.45.1
 

buildroot-external/patches/linux/0073-serial-pmac_zilog-Use-port-lock-wrappers.patch

@@ -1,7 +1,7 @@
-From 8b2afd65acea3ba83a71dde9d62262f9242a5dd7 Mon Sep 17 00:00:00 2001
+From 8c95c6f02e0582acd5dc7d5742b845f1a04aa53f Mon Sep 17 00:00:00 2001
 From: Thomas Gleixner <tglx@linutronix.de>
 Date: Thu, 14 Sep 2023 20:44:04 +0206
-Subject: [PATCH 073/198] serial: pmac_zilog: Use port lock wrappers
+Subject: [PATCH 073/196] serial: pmac_zilog: Use port lock wrappers
 
 When a serial port is used for kernel console output, then all
 modifications to the UART registers which are done from other contexts,
@@ -37,10 +37,10 @@ Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
  1 file changed, 26 insertions(+), 26 deletions(-)
 
 diff --git a/drivers/tty/serial/pmac_zilog.c b/drivers/tty/serial/pmac_zilog.c
-index 13668ffdb1e7..c8bf08c19c64 100644
+index 29bc80d39e8b..77691fbbf779 100644
 --- a/drivers/tty/serial/pmac_zilog.c
 +++ b/drivers/tty/serial/pmac_zilog.c
-@@ -246,9 +246,9 @@ static bool pmz_receive_chars(struct uart_pmac_port *uap)
+@@ -245,9 +245,9 @@ static bool pmz_receive_chars(struct uart_pmac_port *uap)
  #endif /* USE_CTRL_O_SYSRQ */
  		if (uap->port.sysrq) {
  			int swallow;
@@ -52,7 +52,7 @@ index 13668ffdb1e7..c8bf08c19c64 100644
  			if (swallow)
  				goto next_char;
  		}
-@@ -435,7 +435,7 @@ static irqreturn_t pmz_interrupt(int irq, void *dev_id)
+@@ -421,7 +421,7 @@ static irqreturn_t pmz_interrupt(int irq, void *dev_id)
  	uap_a = pmz_get_port_A(uap);
  	uap_b = uap_a->mate;
  
@@ -61,7 +61,7 @@ index 13668ffdb1e7..c8bf08c19c64 100644
  	r3 = read_zsreg(uap_a, R3);
  
  	/* Channel A */
-@@ -456,14 +456,14 @@ static irqreturn_t pmz_interrupt(int irq, void *dev_id)
+@@ -442,14 +442,14 @@ static irqreturn_t pmz_interrupt(int irq, void *dev_id)
  		rc = IRQ_HANDLED;
  	}
   skip_a:
@@ -78,7 +78,7 @@ index 13668ffdb1e7..c8bf08c19c64 100644
  	push = false;
  	if (r3 & (CHBEXT | CHBTxIP | CHBRxIP)) {
  		if (!ZS_IS_OPEN(uap_b)) {
-@@ -481,7 +481,7 @@ static irqreturn_t pmz_interrupt(int irq, void *dev_id)
+@@ -467,7 +467,7 @@ static irqreturn_t pmz_interrupt(int irq, void *dev_id)
  		rc = IRQ_HANDLED;
  	}
   skip_b:
@@ -87,7 +87,7 @@ index 13668ffdb1e7..c8bf08c19c64 100644
  	if (push)
  		tty_flip_buffer_push(&uap->port.state->port);
  
-@@ -497,9 +497,9 @@ static inline u8 pmz_peek_status(struct uart_pmac_port *uap)
+@@ -483,9 +483,9 @@ static inline u8 pmz_peek_status(struct uart_pmac_port *uap)
  	unsigned long flags;
  	u8 status;
  	
@@ -99,7 +99,7 @@ index 13668ffdb1e7..c8bf08c19c64 100644
  
  	return status;
  }
-@@ -685,7 +685,7 @@ static void pmz_break_ctl(struct uart_port *port, int break_state)
+@@ -671,7 +671,7 @@ static void pmz_break_ctl(struct uart_port *port, int break_state)
  	else
  		clear_bits |= SND_BRK;
  
@@ -108,7 +108,7 @@ index 13668ffdb1e7..c8bf08c19c64 100644
  
  	new_reg = (uap->curregs[R5] | set_bits) & ~clear_bits;
  	if (new_reg != uap->curregs[R5]) {
-@@ -693,7 +693,7 @@ static void pmz_break_ctl(struct uart_port *port, int break_state)
+@@ -679,7 +679,7 @@ static void pmz_break_ctl(struct uart_port *port, int break_state)
  		write_zsreg(uap, R5, uap->curregs[R5]);
  	}
  
@@ -117,7 +117,7 @@ index 13668ffdb1e7..c8bf08c19c64 100644
  }
  
  #ifdef CONFIG_PPC_PMAC
-@@ -865,18 +865,18 @@ static void pmz_irda_reset(struct uart_pmac_port *uap)
+@@ -851,18 +851,18 @@ static void pmz_irda_reset(struct uart_pmac_port *uap)
  {
  	unsigned long flags;
  
@@ -140,7 +140,7 @@ index 13668ffdb1e7..c8bf08c19c64 100644
  	msleep(10);
  }
  
-@@ -896,9 +896,9 @@ static int pmz_startup(struct uart_port *port)
+@@ -882,9 +882,9 @@ static int pmz_startup(struct uart_port *port)
  	 * initialize the chip
  	 */
  	if (!ZS_IS_CONS(uap)) {
@@ -152,7 +152,7 @@ index 13668ffdb1e7..c8bf08c19c64 100644
  	}	
  	sprintf(uap->irq_name, PMACZILOG_NAME"%d", uap->port.line);
  	if (request_irq(uap->port.irq, pmz_interrupt, IRQF_SHARED,
-@@ -921,9 +921,9 @@ static int pmz_startup(struct uart_port *port)
+@@ -907,9 +907,9 @@ static int pmz_startup(struct uart_port *port)
  		pmz_irda_reset(uap);
  
  	/* Enable interrupt requests for the channel */
@@ -164,7 +164,7 @@ index 13668ffdb1e7..c8bf08c19c64 100644
  
  	return 0;
  }
-@@ -933,7 +933,7 @@ static void pmz_shutdown(struct uart_port *port)
+@@ -919,7 +919,7 @@ static void pmz_shutdown(struct uart_port *port)
  	struct uart_pmac_port *uap = to_pmz(port);
  	unsigned long flags;
  
@@ -173,7 +173,7 @@ index 13668ffdb1e7..c8bf08c19c64 100644
  
  	/* Disable interrupt requests for the channel */
  	pmz_interrupt_control(uap, 0);
-@@ -948,19 +948,19 @@ static void pmz_shutdown(struct uart_port *port)
+@@ -934,19 +934,19 @@ static void pmz_shutdown(struct uart_port *port)
  		pmz_maybe_update_regs(uap);
  	}
  
@@ -196,7 +196,7 @@ index 13668ffdb1e7..c8bf08c19c64 100644
  }
  
  /* Shared by TTY driver and serial console setup.  The port lock is held
-@@ -1247,7 +1247,7 @@ static void pmz_set_termios(struct uart_port *port, struct ktermios *termios,
+@@ -1233,7 +1233,7 @@ static void pmz_set_termios(struct uart_port *port, struct ktermios *termios,
  	struct uart_pmac_port *uap = to_pmz(port);
  	unsigned long flags;
  
@@ -205,7 +205,7 @@ index 13668ffdb1e7..c8bf08c19c64 100644
  
  	/* Disable IRQs on the port */
  	pmz_interrupt_control(uap, 0);
-@@ -1259,7 +1259,7 @@ static void pmz_set_termios(struct uart_port *port, struct ktermios *termios,
+@@ -1245,7 +1245,7 @@ static void pmz_set_termios(struct uart_port *port, struct ktermios *termios,
  	if (ZS_IS_OPEN(uap))
  		pmz_interrupt_control(uap, 1);
  
@@ -214,7 +214,7 @@ index 13668ffdb1e7..c8bf08c19c64 100644
  }
  
  static const char *pmz_type(struct uart_port *port)
-@@ -1896,7 +1896,7 @@ static void pmz_console_write(struct console *con, const char *s, unsigned int c
+@@ -1882,7 +1882,7 @@ static void pmz_console_write(struct console *con, const char *s, unsigned int c
  	struct uart_pmac_port *uap = &pmz_ports[con->index];
  	unsigned long flags;
  
@@ -223,7 +223,7 @@ index 13668ffdb1e7..c8bf08c19c64 100644
  
  	/* Turn of interrupts and enable the transmitter. */
  	write_zsreg(uap, R1, uap->curregs[1] & ~TxINT_ENAB);
-@@ -1908,7 +1908,7 @@ static void pmz_console_write(struct console *con, const char *s, unsigned int c
+@@ -1894,7 +1894,7 @@ static void pmz_console_write(struct console *con, const char *s, unsigned int c
  	write_zsreg(uap, R1, uap->curregs[1]);
  	/* Don't disable the transmitter. */
  
@@ -233,5 +233,5 @@ index 13668ffdb1e7..c8bf08c19c64 100644
  
  /*
 -- 
-2.44.0
+2.45.1
 

buildroot-external/patches/linux/0074-serial-pxa-Use-port-lock-wrappers.patch

@@ -1,7 +1,7 @@
-From 562160975c4f9073ed4f010cc11718b5134a42fd Mon Sep 17 00:00:00 2001
+From 8fdc9a63d87ff3c5b232e900181bf9214dd1b961 Mon Sep 17 00:00:00 2001
 From: Thomas Gleixner <tglx@linutronix.de>
 Date: Thu, 14 Sep 2023 20:44:05 +0206
-Subject: [PATCH 074/198] serial: pxa: Use port lock wrappers
+Subject: [PATCH 074/196] serial: pxa: Use port lock wrappers
 
 When a serial port is used for kernel console output, then all
 modifications to the UART registers which are done from other contexts,
@@ -151,5 +151,5 @@ index 73c60f5ea027..46e70e155aab 100644
  	clk_disable(up->clk);
  
 -- 
-2.44.0
+2.45.1
 

buildroot-external/patches/linux/0075-serial-qcom-geni-Use-port-lock-wrappers.patch

@@ -1,7 +1,7 @@
-From 1f68c281021058402d7afdc27d8a3787271ce0c1 Mon Sep 17 00:00:00 2001
+From 797f20809e0cf5d124e9455d039f59f1989769cc Mon Sep 17 00:00:00 2001
 From: Thomas Gleixner <tglx@linutronix.de>
 Date: Thu, 14 Sep 2023 20:44:06 +0206
-Subject: [PATCH 075/198] serial: qcom-geni: Use port lock wrappers
+Subject: [PATCH 075/196] serial: qcom-geni: Use port lock wrappers
 
 When a serial port is used for kernel console output, then all
 modifications to the UART registers which are done from other contexts,
@@ -72,5 +72,5 @@ index 2e1b1c827dfe..549909644011 100644
  	m_irq_status = readl(uport->membase + SE_GENI_M_IRQ_STATUS);
  	s_irq_status = readl(uport->membase + SE_GENI_S_IRQ_STATUS);
 -- 
-2.44.0
+2.45.1
 

buildroot-external/patches/linux/0076-serial-rda-Use-port-lock-wrappers.patch

@@ -1,7 +1,7 @@
-From c1952a62d5c169b632e1a01092ad0360cc16335a Mon Sep 17 00:00:00 2001
+From bec076ae9bfb37045b447f79ff00da285ca4282e Mon Sep 17 00:00:00 2001
 From: Thomas Gleixner <tglx@linutronix.de>
 Date: Thu, 14 Sep 2023 20:44:07 +0206
-Subject: [PATCH 076/198] serial: rda: Use port lock wrappers
+Subject: [PATCH 076/196] serial: rda: Use port lock wrappers
 
 When a serial port is used for kernel console output, then all
 modifications to the UART registers which are done from other contexts,
@@ -178,5 +178,5 @@ index be5c842b5ba9..d824c8318f33 100644
  	local_irq_restore(flags);
  }
 -- 
-2.44.0
+2.45.1
 

buildroot-external/patches/linux/0077-serial-rp2-Use-port-lock-wrappers.patch

@@ -1,7 +1,7 @@
-From 8437e789125eee68ce6dfa6f9416112aca4d0886 Mon Sep 17 00:00:00 2001
+From 1c41be64f53557ffc322939b84583528f2eaa48b Mon Sep 17 00:00:00 2001
 From: Thomas Gleixner <tglx@linutronix.de>
 Date: Thu, 14 Sep 2023 20:44:08 +0206
-Subject: [PATCH 077/198] serial: rp2: Use port lock wrappers
+Subject: [PATCH 077/196] serial: rp2: Use port lock wrappers
 
 When a serial port is used for kernel console output, then all
 modifications to the UART registers which are done from other contexts,
@@ -115,5 +115,5 @@ index de220ac8ca54..d46a81cddfcd 100644
  
  static const char *rp2_uart_type(struct uart_port *port)
 -- 
-2.44.0
+2.45.1
 

buildroot-external/patches/linux/0078-serial-sa1100-Use-port-lock-wrappers.patch

@@ -1,7 +1,7 @@
-From 6845a4152e1754bf40372d61bbf7c2398e3f4399 Mon Sep 17 00:00:00 2001
+From 1be172160f21847df23f6b6de47a17bc21c4e4ab Mon Sep 17 00:00:00 2001
 From: Thomas Gleixner <tglx@linutronix.de>
 Date: Thu, 14 Sep 2023 20:44:09 +0206
-Subject: [PATCH 078/198] serial: sa1100: Use port lock wrappers
+Subject: [PATCH 078/196] serial: sa1100: Use port lock wrappers
 
 When a serial port is used for kernel console output, then all
 modifications to the UART registers which are done from other contexts,
@@ -118,5 +118,5 @@ index ad011f1e2f4d..be7bcd75d9f4 100644
  
  static const char *sa1100_type(struct uart_port *port)
 -- 
-2.44.0
+2.45.1
 

buildroot-external/patches/linux/0079-serial-samsung_tty-Use-port-lock-wrappers.patch

@@ -1,7 +1,7 @@
-From 9372712a3d7f5dd1ce1fdee77c5bbdfbbb4b01bf Mon Sep 17 00:00:00 2001
+From 19fce9567f035d97964d26ec6f75987db8cc09c8 Mon Sep 17 00:00:00 2001
 From: Thomas Gleixner <tglx@linutronix.de>
 Date: Thu, 14 Sep 2023 20:44:10 +0206
-Subject: [PATCH 079/198] serial: samsung_tty: Use port lock wrappers
+Subject: [PATCH 079/196] serial: samsung_tty: Use port lock wrappers
 
 When a serial port is used for kernel console output, then all
 modifications to the UART registers which are done from other contexts,
@@ -246,5 +246,5 @@ index 5a4d88e13471..a82b65155f6e 100644
  
  /* Shouldn't be __init, as it can be instantiated from other module */
 -- 
-2.44.0
+2.45.1
 

buildroot-external/patches/linux/0080-serial-sb1250-duart-Use-port-lock-wrappers.patch

@@ -1,7 +1,7 @@
-From a9a1289498cb842a55d57ede4ff1b2bd96b7a1b9 Mon Sep 17 00:00:00 2001
+From e678498df469db89f4ab187fc8adabcf3eb37d12 Mon Sep 17 00:00:00 2001
 From: Thomas Gleixner <tglx@linutronix.de>
 Date: Thu, 14 Sep 2023 20:44:11 +0206
-Subject: [PATCH 080/198] serial: sb1250-duart: Use port lock wrappers
+Subject: [PATCH 080/196] serial: sb1250-duart: Use port lock wrappers
 
 When a serial port is used for kernel console output, then all
 modifications to the UART registers which are done from other contexts,
@@ -86,5 +86,5 @@ index f3cd69346482..dbec29d9a6c3 100644
  
  static int __init sbd_console_setup(struct console *co, char *options)
 -- 
-2.44.0
+2.45.1
 

buildroot-external/patches/linux/0081-serial-sc16is7xx-Use-port-lock-wrappers.patch

@@ -1,7 +1,7 @@
-From d303da34308c0d86ec48943f96a9f66d8e039e68 Mon Sep 17 00:00:00 2001
+From 03d8f5cb73c37e6fc29a5edde7d64923fdb99921 Mon Sep 17 00:00:00 2001
 From: Thomas Gleixner <tglx@linutronix.de>
 Date: Thu, 14 Sep 2023 20:44:12 +0206
-Subject: [PATCH 081/198] serial: sc16is7xx: Use port lock wrappers
+Subject: [PATCH 081/196] serial: sc16is7xx: Use port lock wrappers
 
 When a serial port is used for kernel console output, then all
 modifications to the UART registers which are done from other contexts,
@@ -60,5 +60,5 @@ index f75b8bceb8ca..2d7470457af4 100644
  
  static void sc16is7xx_reconf_rs485(struct uart_port *port)
 -- 
-2.44.0
+2.45.1
 

buildroot-external/patches/linux/0082-serial-tegra-Use-port-lock-wrappers.patch

@@ -1,7 +1,7 @@
-From 66442db9d3a607c2bdfd84ed1a331813f2dd026a Mon Sep 17 00:00:00 2001
+From eff9dad159fcc1615e9fe23d932174f224aa484c Mon Sep 17 00:00:00 2001
 From: Thomas Gleixner <tglx@linutronix.de>
 Date: Thu, 14 Sep 2023 20:44:13 +0206
-Subject: [PATCH 082/198] serial: tegra: Use port lock wrappers
+Subject: [PATCH 082/196] serial: tegra: Use port lock wrappers
 
 When a serial port is used for kernel console output, then all
 modifications to the UART registers which are done from other contexts,
@@ -177,5 +177,5 @@ index d4ec943cb8e9..6d4006b41975 100644
  
  static const char *tegra_uart_type(struct uart_port *u)
 -- 
-2.44.0
+2.45.1
 

buildroot-external/patches/linux/0083-serial-core-Use-port-lock-wrappers.patch

@@ -1,7 +1,7 @@
-From 1d1af26137b4e240e05f8da2a093bb74708411af Mon Sep 17 00:00:00 2001
+From 6f61eb0c15964cb8a36dddebdc2c6a2b95f72faa Mon Sep 17 00:00:00 2001
 From: Thomas Gleixner <tglx@linutronix.de>
 Date: Thu, 14 Sep 2023 20:44:14 +0206
-Subject: [PATCH 083/198] serial: core: Use port lock wrappers
+Subject: [PATCH 083/196] serial: core: Use port lock wrappers
 
 When a serial port is used for kernel console output, then all
 modifications to the UART registers which are done from other contexts,
@@ -38,7 +38,7 @@ Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
  2 files changed, 48 insertions(+), 48 deletions(-)
 
 diff --git a/drivers/tty/serial/serial_core.c b/drivers/tty/serial/serial_core.c
-index 4c81210ad9b3..fc59ba702752 100644
+index 2eceef54e0b3..6cd64ccc2035 100644
 --- a/drivers/tty/serial/serial_core.c
 +++ b/drivers/tty/serial/serial_core.c
 @@ -79,7 +79,7 @@ static inline void uart_port_deref(struct uart_port *uport)
@@ -92,7 +92,7 @@ index 4c81210ad9b3..fc59ba702752 100644
  }
  
  /*
-@@ -702,11 +702,11 @@ static void uart_send_xchar(struct tty_struct *tty, char ch)
+@@ -715,11 +715,11 @@ static void uart_send_xchar(struct tty_struct *tty, char ch)
  	if (port->ops->send_xchar)
  		port->ops->send_xchar(port, ch);
  	else {
@@ -106,7 +106,7 @@ index 4c81210ad9b3..fc59ba702752 100644
  	}
  	uart_port_deref(port);
  }
-@@ -1085,9 +1085,9 @@ static int uart_tiocmget(struct tty_struct *tty)
+@@ -1098,9 +1098,9 @@ static int uart_tiocmget(struct tty_struct *tty)
  
  	if (!tty_io_error(tty)) {
  		result = uport->mctrl;
@@ -118,7 +118,7 @@ index 4c81210ad9b3..fc59ba702752 100644
  	}
  out:
  	mutex_unlock(&port->mutex);
-@@ -1223,16 +1223,16 @@ static int uart_wait_modem_status(struct uart_state *state, unsigned long arg)
+@@ -1236,16 +1236,16 @@ static int uart_wait_modem_status(struct uart_state *state, unsigned long arg)
  	uport = uart_port_ref(state);
  	if (!uport)
  		return -EIO;
@@ -139,7 +139,7 @@ index 4c81210ad9b3..fc59ba702752 100644
  
  		set_current_state(TASK_INTERRUPTIBLE);
  
-@@ -1277,9 +1277,9 @@ static int uart_get_icount(struct tty_struct *tty,
+@@ -1290,9 +1290,9 @@ static int uart_get_icount(struct tty_struct *tty,
  	uport = uart_port_ref(state);
  	if (!uport)
  		return -EIO;
@@ -151,7 +151,7 @@ index 4c81210ad9b3..fc59ba702752 100644
  	uart_port_deref(uport);
  
  	icount->cts         = cnow.cts;
-@@ -1432,9 +1432,9 @@ static int uart_rs485_config(struct uart_port *port)
+@@ -1445,9 +1445,9 @@ static int uart_rs485_config(struct uart_port *port)
  	uart_set_rs485_termination(port, rs485);
  	uart_set_rs485_rx_during_tx(port, rs485);
  
@@ -163,7 +163,7 @@ index 4c81210ad9b3..fc59ba702752 100644
  	if (ret) {
  		memset(rs485, 0, sizeof(*rs485));
  		/* unset GPIOs */
-@@ -1451,9 +1451,9 @@ static int uart_get_rs485_config(struct uart_port *port,
+@@ -1464,9 +1464,9 @@ static int uart_get_rs485_config(struct uart_port *port,
  	unsigned long flags;
  	struct serial_rs485 aux;
  
@@ -175,7 +175,7 @@ index 4c81210ad9b3..fc59ba702752 100644
  
  	if (copy_to_user(rs485, &aux, sizeof(aux)))
  		return -EFAULT;
-@@ -1481,7 +1481,7 @@ static int uart_set_rs485_config(struct tty_struct *tty, struct uart_port *port,
+@@ -1494,7 +1494,7 @@ static int uart_set_rs485_config(struct tty_struct *tty, struct uart_port *port,
  	uart_set_rs485_termination(port, &rs485);
  	uart_set_rs485_rx_during_tx(port, &rs485);
  
@@ -184,7 +184,7 @@ index 4c81210ad9b3..fc59ba702752 100644
  	ret = port->rs485_config(port, &tty->termios, &rs485);
  	if (!ret) {
  		port->rs485 = rs485;
-@@ -1490,7 +1490,7 @@ static int uart_set_rs485_config(struct tty_struct *tty, struct uart_port *port,
+@@ -1503,7 +1503,7 @@ static int uart_set_rs485_config(struct tty_struct *tty, struct uart_port *port,
  		if (!(rs485.flags & SER_RS485_ENABLED))
  			port->ops->set_mctrl(port, port->mctrl);
  	}
@@ -193,7 +193,7 @@ index 4c81210ad9b3..fc59ba702752 100644
  	if (ret) {
  		/* restore old GPIO settings */
  		gpiod_set_value_cansleep(port->rs485_term_gpio,
-@@ -1515,9 +1515,9 @@ static int uart_get_iso7816_config(struct uart_port *port,
+@@ -1528,9 +1528,9 @@ static int uart_get_iso7816_config(struct uart_port *port,
  	if (!port->iso7816_config)
  		return -ENOTTY;
  
@@ -205,7 +205,7 @@ index 4c81210ad9b3..fc59ba702752 100644
  
  	if (copy_to_user(iso7816, &aux, sizeof(aux)))
  		return -EFAULT;
-@@ -1546,9 +1546,9 @@ static int uart_set_iso7816_config(struct uart_port *port,
+@@ -1559,9 +1559,9 @@ static int uart_set_iso7816_config(struct uart_port *port,
  		if (iso7816.reserved[i])
  			return -EINVAL;
  
@@ -217,7 +217,7 @@ index 4c81210ad9b3..fc59ba702752 100644
  	if (ret)
  		return ret;
  
-@@ -1765,9 +1765,9 @@ static void uart_tty_port_shutdown(struct tty_port *port)
+@@ -1778,9 +1778,9 @@ static void uart_tty_port_shutdown(struct tty_port *port)
  	if (WARN(!uport, "detached port still initialized!\n"))
  		return;
  
@@ -227,14 +227,15 @@ index 4c81210ad9b3..fc59ba702752 100644
 -	spin_unlock_irq(&uport->lock);
 +	uart_port_unlock_irq(uport);
  
+ 	serial_base_port_shutdown(uport);
  	uart_port_shutdown(port);
- 
+@@ -1795,11 +1795,11 @@ static void uart_tty_port_shutdown(struct tty_port *port)
-@@ -1781,10 +1781,10 @@ static void uart_tty_port_shutdown(struct tty_port *port)
  	/*
  	 * Free the transmit buffer.
  	 */
 -	spin_lock_irq(&uport->lock);
 +	uart_port_lock_irq(uport);
+ 	uart_circ_clear(&state->xmit);
  	buf = state->xmit.buf;
  	state->xmit.buf = NULL;
 -	spin_unlock_irq(&uport->lock);
@@ -242,7 +243,7 @@ index 4c81210ad9b3..fc59ba702752 100644
  
  	free_page((unsigned long)buf);
  
-@@ -1927,10 +1927,10 @@ static bool uart_carrier_raised(struct tty_port *port)
+@@ -1942,10 +1942,10 @@ static bool uart_carrier_raised(struct tty_port *port)
  	 */
  	if (WARN_ON(!uport))
  		return true;
@@ -255,7 +256,7 @@ index 4c81210ad9b3..fc59ba702752 100644
  	uart_port_deref(uport);
  
  	return mctrl & TIOCM_CAR;
-@@ -2047,9 +2047,9 @@ static void uart_line_info(struct seq_file *m, struct uart_driver *drv, int i)
+@@ -2062,9 +2062,9 @@ static void uart_line_info(struct seq_file *m, struct uart_driver *drv, int i)
  		pm_state = state->pm_state;
  		if (pm_state != UART_PM_STATE_ON)
  			uart_change_pm(state, UART_PM_STATE_ON);
@@ -267,7 +268,7 @@ index 4c81210ad9b3..fc59ba702752 100644
  		if (pm_state != UART_PM_STATE_ON)
  			uart_change_pm(state, pm_state);
  
-@@ -2388,9 +2388,9 @@ int uart_suspend_port(struct uart_driver *drv, struct uart_port *uport)
+@@ -2403,9 +2403,9 @@ int uart_suspend_port(struct uart_driver *drv, struct uart_port *uport)
  	 */
  	if (!console_suspend_enabled && uart_console(uport)) {
  		if (uport->ops->start_rx) {
@@ -279,7 +280,7 @@ index 4c81210ad9b3..fc59ba702752 100644
  		}
  		goto unlock;
  	}
-@@ -2405,7 +2405,7 @@ int uart_suspend_port(struct uart_driver *drv, struct uart_port *uport)
+@@ -2420,7 +2420,7 @@ int uart_suspend_port(struct uart_driver *drv, struct uart_port *uport)
  		tty_port_set_suspended(port, true);
  		tty_port_set_initialized(port, false);
  
@@ -288,7 +289,7 @@ index 4c81210ad9b3..fc59ba702752 100644
  		ops->stop_tx(uport);
  		if (!(uport->rs485.flags & SER_RS485_ENABLED))
  			ops->set_mctrl(uport, 0);
-@@ -2413,7 +2413,7 @@ int uart_suspend_port(struct uart_driver *drv, struct uart_port *uport)
+@@ -2428,7 +2428,7 @@ int uart_suspend_port(struct uart_driver *drv, struct uart_port *uport)
  		mctrl = uport->mctrl;
  		uport->mctrl = 0;
  		ops->stop_rx(uport);
@@ -297,7 +298,7 @@ index 4c81210ad9b3..fc59ba702752 100644
  
  		/*
  		 * Wait for the transmitter to empty.
-@@ -2485,9 +2485,9 @@ int uart_resume_port(struct uart_driver *drv, struct uart_port *uport)
+@@ -2500,9 +2500,9 @@ int uart_resume_port(struct uart_driver *drv, struct uart_port *uport)
  			uart_change_pm(state, UART_PM_STATE_ON);
  		uport->ops->set_termios(uport, &termios, NULL);
  		if (!console_suspend_enabled && uport->ops->start_rx) {
@@ -309,7 +310,7 @@ index 4c81210ad9b3..fc59ba702752 100644
  		}
  		if (console_suspend_enabled)
  			console_start(uport->cons);
-@@ -2498,10 +2498,10 @@ int uart_resume_port(struct uart_driver *drv, struct uart_port *uport)
+@@ -2513,10 +2513,10 @@ int uart_resume_port(struct uart_driver *drv, struct uart_port *uport)
  		int ret;
  
  		uart_change_pm(state, UART_PM_STATE_ON);
@@ -322,7 +323,7 @@ index 4c81210ad9b3..fc59ba702752 100644
  		if (console_suspend_enabled || !uart_console(uport)) {
  			/* Protected by port mutex for now */
  			struct tty_struct *tty = port->tty;
-@@ -2511,11 +2511,11 @@ int uart_resume_port(struct uart_driver *drv, struct uart_port *uport)
+@@ -2526,11 +2526,11 @@ int uart_resume_port(struct uart_driver *drv, struct uart_port *uport)
  				if (tty)
  					uart_change_line_settings(tty, state, NULL);
  				uart_rs485_config(uport);
@@ -336,7 +337,7 @@ index 4c81210ad9b3..fc59ba702752 100644
  				tty_port_set_initialized(port, true);
  			} else {
  				/*
-@@ -2627,11 +2627,11 @@ uart_configure_port(struct uart_driver *drv, struct uart_state *state,
+@@ -2642,11 +2642,11 @@ uart_configure_port(struct uart_driver *drv, struct uart_state *state,
  		 * keep the DTR setting that is set in uart_set_options()
  		 * We probably don't need a spinlock around this, but
  		 */
@@ -351,22 +352,26 @@ index 4c81210ad9b3..fc59ba702752 100644
  		uart_rs485_config(port);
  
 diff --git a/drivers/tty/serial/serial_port.c b/drivers/tty/serial/serial_port.c
-index 0b3cef3c323b..72b6f4f326e2 100644
+index d622a9297f65..7d51e66ec88b 100644
 --- a/drivers/tty/serial/serial_port.c
 +++ b/drivers/tty/serial/serial_port.c
-@@ -35,10 +35,10 @@ static int serial_port_runtime_resume(struct device *dev)
+@@ -35,14 +35,14 @@ static int serial_port_runtime_resume(struct device *dev)
  		goto out;
  
  	/* Flush any pending TX for the port */
 -	spin_lock_irqsave(&port->lock, flags);
 +	uart_port_lock_irqsave(port, &flags);
+ 	if (!port_dev->tx_enabled)
+ 		goto unlock;
  	if (__serial_port_busy(port))
  		port->ops->start_tx(port);
+ 
+ unlock:
 -	spin_unlock_irqrestore(&port->lock, flags);
 +	uart_port_unlock_irqrestore(port, flags);
  
  out:
  	pm_runtime_mark_last_busy(dev);
 -- 
-2.44.0
+2.45.1
 

buildroot-external/patches/linux/0084-serial-mctrl_gpio-Use-port-lock-wrappers.patch

@@ -1,7 +1,7 @@
-From 6c67e782fccb3ff27f786fe76a440707709ab23b Mon Sep 17 00:00:00 2001
+From 23f8714bb0b3ed5c66b6203258b7e44753b22494 Mon Sep 17 00:00:00 2001
 From: Thomas Gleixner <tglx@linutronix.de>
 Date: Thu, 14 Sep 2023 20:44:15 +0206
-Subject: [PATCH 084/198] serial: mctrl_gpio: Use port lock wrappers
+Subject: [PATCH 084/196] serial: mctrl_gpio: Use port lock wrappers
 
 When a serial port is used for kernel console output, then all
 modifications to the UART registers which are done from other contexts,
@@ -59,5 +59,5 @@ index 7d5aaa8d422b..e51ca593ab86 100644
  	return IRQ_HANDLED;
  }
 -- 
-2.44.0
+2.45.1
 

buildroot-external/patches/linux/0085-serial-txx9-Use-port-lock-wrappers.patch

@@ -1,7 +1,7 @@
-From 8f48330aefb07e35529c2d31392935c3375d9074 Mon Sep 17 00:00:00 2001
+From 49fd397127db89100b4b36d41d078c73064a2e99 Mon Sep 17 00:00:00 2001
 From: Thomas Gleixner <tglx@linutronix.de>
 Date: Thu, 14 Sep 2023 20:44:16 +0206
-Subject: [PATCH 085/198] serial: txx9: Use port lock wrappers
+Subject: [PATCH 085/196] serial: txx9: Use port lock wrappers
 
 When a serial port is used for kernel console output, then all
 modifications to the UART registers which are done from other contexts,
@@ -135,5 +135,5 @@ index be08fb6f749c..eaa980722455 100644
  
  static void
 -- 
-2.44.0
+2.45.1
 

buildroot-external/patches/linux/0086-serial-sh-sci-Use-port-lock-wrappers.patch

@@ -1,7 +1,7 @@
-From 00e0ec0aeb7f915808d1772bc479c823de21c2d8 Mon Sep 17 00:00:00 2001
+From c51cb1cc8704b0d8ff63e91cbd7a6d4fd2e46743 Mon Sep 17 00:00:00 2001
 From: Thomas Gleixner <tglx@linutronix.de>
 Date: Thu, 14 Sep 2023 20:44:17 +0206
-Subject: [PATCH 086/198] serial: sh-sci: Use port lock wrappers
+Subject: [PATCH 086/196] serial: sh-sci: Use port lock wrappers
 
 When a serial port is used for kernel console output, then all
 modifications to the UART registers which are done from other contexts,
@@ -303,5 +303,5 @@ index a560b729fa3b..84ab434c94ba 100644
  
  static int serial_console_setup(struct console *co, char *options)
 -- 
-2.44.0
+2.45.1
 

buildroot-external/patches/linux/0087-serial-sifive-Use-port-lock-wrappers.patch

@@ -1,7 +1,7 @@
-From 964adde6bb8848877f53d30a33ad1cabba18ee8f Mon Sep 17 00:00:00 2001
+From bcdc73beb8560a4df916f430735cb50f5e1a183d Mon Sep 17 00:00:00 2001
 From: Thomas Gleixner <tglx@linutronix.de>
 Date: Thu, 14 Sep 2023 20:44:18 +0206
-Subject: [PATCH 087/198] serial: sifive: Use port lock wrappers
+Subject: [PATCH 087/196] serial: sifive: Use port lock wrappers
 
 When a serial port is used for kernel console output, then all
 modifications to the UART registers which are done from other contexts,
@@ -103,5 +103,5 @@ index d195c5de52e7..b296e57a9dee 100644
  }
  
 -- 
-2.44.0
+2.45.1
 

buildroot-external/patches/linux/0088-serial-sprd-Use-port-lock-wrappers.patch

@@ -1,7 +1,7 @@
-From 3b9ed6c95a036b76547ea9a369d0a353fd81b72e Mon Sep 17 00:00:00 2001
+From 4b60d142cf08c5470367870165430ee8e904e784 Mon Sep 17 00:00:00 2001
 From: Thomas Gleixner <tglx@linutronix.de>
 Date: Thu, 14 Sep 2023 20:44:19 +0206
-Subject: [PATCH 088/198] serial: sprd: Use port lock wrappers
+Subject: [PATCH 088/196] serial: sprd: Use port lock wrappers
 
 When a serial port is used for kernel console output, then all
 modifications to the UART registers which are done from other contexts,
@@ -163,5 +163,5 @@ index f328fa57231f..f257525f9299 100644
  
  static int sprd_console_setup(struct console *co, char *options)
 -- 
-2.44.0
+2.45.1
 

buildroot-external/patches/linux/0089-serial-st-asc-Use-port-lock-wrappers.patch

@@ -1,7 +1,7 @@
-From e52ba1ff3e44ce867023e6c23c97edfd8dbc3388 Mon Sep 17 00:00:00 2001
+From d3da0499339bd417294360e9c9310f6d0bc29672 Mon Sep 17 00:00:00 2001
 From: Thomas Gleixner <tglx@linutronix.de>
 Date: Thu, 14 Sep 2023 20:44:20 +0206
-Subject: [PATCH 089/198] serial: st-asc: Use port lock wrappers
+Subject: [PATCH 089/196] serial: st-asc: Use port lock wrappers
 
 When a serial port is used for kernel console output, then all
 modifications to the UART registers which are done from other contexts,
@@ -111,5 +111,5 @@ index 92b9f6894006..a821f5d76a26 100644
  
  static int asc_console_setup(struct console *co, char *options)
 -- 
-2.44.0
+2.45.1
 

buildroot-external/patches/linux/0090-serial-stm32-Use-port-lock-wrappers.patch

@@ -1,7 +1,7 @@
-From acbbd819705ab82602bbf45a18a584abb4d83efc Mon Sep 17 00:00:00 2001
+From 62bae6347efa388fc68a191b955c9433e4dc3a6e Mon Sep 17 00:00:00 2001
 From: Thomas Gleixner <tglx@linutronix.de>
 Date: Thu, 14 Sep 2023 20:44:21 +0206
-Subject: [PATCH 090/198] serial: stm32: Use port lock wrappers
+Subject: [PATCH 090/196] serial: stm32: Use port lock wrappers
 
 When a serial port is used for kernel console output, then all
 modifications to the UART registers which are done from other contexts,
@@ -37,7 +37,7 @@ Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
  1 file changed, 19 insertions(+), 19 deletions(-)
 
 diff --git a/drivers/tty/serial/stm32-usart.c b/drivers/tty/serial/stm32-usart.c
-index e5f933beb6c0..d8fe1ca75ac4 100644
+index 9ef90bb30a47..b963f9ccb070 100644
 --- a/drivers/tty/serial/stm32-usart.c
 +++ b/drivers/tty/serial/stm32-usart.c
 @@ -535,7 +535,7 @@ static void stm32_usart_rx_dma_complete(void *arg)
@@ -61,7 +61,7 @@ index e5f933beb6c0..d8fe1ca75ac4 100644
  }
  
  static void stm32_usart_tx_interrupt_enable(struct uart_port *port)
-@@ -887,7 +887,7 @@ static irqreturn_t stm32_usart_interrupt(int irq, void *ptr)
+@@ -892,7 +892,7 @@ static irqreturn_t stm32_usart_interrupt(int irq, void *ptr)
  	if (!stm32_port->throttled) {
  		if (((sr & USART_SR_RXNE) && !stm32_usart_rx_dma_started(stm32_port)) ||
  		    ((sr & USART_SR_ERR_MASK) && stm32_usart_rx_dma_started(stm32_port))) {
@@ -70,7 +70,7 @@ index e5f933beb6c0..d8fe1ca75ac4 100644
  			size = stm32_usart_receive_chars(port, false);
  			uart_unlock_and_check_sysrq(port);
  			if (size)
-@@ -896,14 +896,14 @@ static irqreturn_t stm32_usart_interrupt(int irq, void *ptr)
+@@ -902,15 +902,15 @@ static irqreturn_t stm32_usart_interrupt(int irq, void *ptr)
  	}
  
  	if ((sr & USART_SR_TXE) && !(stm32_port->tx_ch)) {
@@ -79,6 +79,7 @@ index e5f933beb6c0..d8fe1ca75ac4 100644
  		stm32_usart_transmit_chars(port);
 -		spin_unlock(&port->lock);
 +		uart_port_unlock(port);
+ 		ret = IRQ_HANDLED;
  	}
  
  	/* Receiver timeout irq for DMA RX */
@@ -88,7 +89,7 @@ index e5f933beb6c0..d8fe1ca75ac4 100644
  		size = stm32_usart_receive_chars(port, false);
  		uart_unlock_and_check_sysrq(port);
  		if (size)
-@@ -991,7 +991,7 @@ static void stm32_usart_throttle(struct uart_port *port)
+@@ -999,7 +999,7 @@ static void stm32_usart_throttle(struct uart_port *port)
  	const struct stm32_usart_offsets *ofs = &stm32_port->info->ofs;
  	unsigned long flags;
  
@@ -97,7 +98,7 @@ index e5f933beb6c0..d8fe1ca75ac4 100644
  
  	/*
  	 * Pause DMA transfer, so the RX data gets queued into the FIFO.
-@@ -1004,7 +1004,7 @@ static void stm32_usart_throttle(struct uart_port *port)
+@@ -1012,7 +1012,7 @@ static void stm32_usart_throttle(struct uart_port *port)
  		stm32_usart_clr_bits(port, ofs->cr3, stm32_port->cr3_irq);
  
  	stm32_port->throttled = true;
@@ -106,7 +107,7 @@ index e5f933beb6c0..d8fe1ca75ac4 100644
  }
  
  /* Unthrottle the remote, the input buffer can now accept data. */
-@@ -1014,7 +1014,7 @@ static void stm32_usart_unthrottle(struct uart_port *port)
+@@ -1022,7 +1022,7 @@ static void stm32_usart_unthrottle(struct uart_port *port)
  	const struct stm32_usart_offsets *ofs = &stm32_port->info->ofs;
  	unsigned long flags;
  
@@ -115,7 +116,7 @@ index e5f933beb6c0..d8fe1ca75ac4 100644
  	stm32_usart_set_bits(port, ofs->cr1, stm32_port->cr1_irq);
  	if (stm32_port->cr3_irq)
  		stm32_usart_set_bits(port, ofs->cr3, stm32_port->cr3_irq);
-@@ -1028,7 +1028,7 @@ static void stm32_usart_unthrottle(struct uart_port *port)
+@@ -1036,7 +1036,7 @@ static void stm32_usart_unthrottle(struct uart_port *port)
  	if (stm32_port->rx_ch)
  		stm32_usart_rx_dma_start_or_resume(port);
  
@@ -124,7 +125,7 @@ index e5f933beb6c0..d8fe1ca75ac4 100644
  }
  
  /* Receive stop */
-@@ -1156,7 +1156,7 @@ static void stm32_usart_set_termios(struct uart_port *port,
+@@ -1165,7 +1165,7 @@ static void stm32_usart_set_termios(struct uart_port *port,
  
  	baud = uart_get_baud_rate(port, termios, old, 0, port->uartclk / 8);
  
@@ -133,7 +134,7 @@ index e5f933beb6c0..d8fe1ca75ac4 100644
  
  	ret = readl_relaxed_poll_timeout_atomic(port->membase + ofs->isr,
  						isr,
-@@ -1347,7 +1347,7 @@ static void stm32_usart_set_termios(struct uart_port *port,
+@@ -1356,7 +1356,7 @@ static void stm32_usart_set_termios(struct uart_port *port,
  	writel_relaxed(cr1, port->membase + ofs->cr1);
  
  	stm32_usart_set_bits(port, ofs->cr1, BIT(cfg->uart_enable_bit));
@@ -142,7 +143,7 @@ index e5f933beb6c0..d8fe1ca75ac4 100644
  
  	/* Handle modem control interrupts */
  	if (UART_ENABLE_MS(port, termios->c_cflag))
-@@ -1397,9 +1397,9 @@ static void stm32_usart_pm(struct uart_port *port, unsigned int state,
+@@ -1406,9 +1406,9 @@ static void stm32_usart_pm(struct uart_port *port, unsigned int state,
  		pm_runtime_get_sync(port->dev);
  		break;
  	case UART_PM_STATE_OFF:
@@ -154,7 +155,7 @@ index e5f933beb6c0..d8fe1ca75ac4 100644
  		pm_runtime_put_sync(port->dev);
  		break;
  	}
-@@ -1882,9 +1882,9 @@ static void stm32_usart_console_write(struct console *co, const char *s,
+@@ -1891,9 +1891,9 @@ static void stm32_usart_console_write(struct console *co, const char *s,
  	int locked = 1;
  
  	if (oops_in_progress)
@@ -166,7 +167,7 @@ index e5f933beb6c0..d8fe1ca75ac4 100644
  
  	/* Save and disable interrupts, enable the transmitter */
  	old_cr1 = readl_relaxed(port->membase + ofs->cr1);
-@@ -1898,7 +1898,7 @@ static void stm32_usart_console_write(struct console *co, const char *s,
+@@ -1907,7 +1907,7 @@ static void stm32_usart_console_write(struct console *co, const char *s,
  	writel_relaxed(old_cr1, port->membase + ofs->cr1);
  
  	if (locked)
@@ -175,7 +176,7 @@ index e5f933beb6c0..d8fe1ca75ac4 100644
  }
  
  static int stm32_usart_console_setup(struct console *co, char *options)
-@@ -2033,7 +2033,7 @@ static int __maybe_unused stm32_usart_serial_en_wakeup(struct uart_port *port,
+@@ -2042,7 +2042,7 @@ static int __maybe_unused stm32_usart_serial_en_wakeup(struct uart_port *port,
  		 * low-power mode.
  		 */
  		if (stm32_port->rx_ch) {
@@ -185,5 +186,5 @@ index e5f933beb6c0..d8fe1ca75ac4 100644
  			if (!stm32_usart_rx_dma_pause(stm32_port))
  				size += stm32_usart_receive_chars(port, true);
 -- 
-2.44.0
+2.45.1
 

buildroot-external/patches/linux/0091-serial-sunhv-Use-port-lock-wrappers.patch

@@ -1,7 +1,7 @@
-From ac2136f55b70ee185bab436362a4fdac219baa04 Mon Sep 17 00:00:00 2001
+From d3c89bc1efcf59a2977a263219ba612770939508 Mon Sep 17 00:00:00 2001
 From: Thomas Gleixner <tglx@linutronix.de>
 Date: Thu, 14 Sep 2023 20:44:22 +0206
-Subject: [PATCH 091/198] serial: sunhv: Use port lock wrappers
+Subject: [PATCH 091/196] serial: sunhv: Use port lock wrappers
 
 When a serial port is used for kernel console output, then all
 modifications to the UART registers which are done from other contexts,
@@ -150,5 +150,5 @@ index c671d674bce4..5bfc0040f17b 100644
  
  static struct console sunhv_console = {
 -- 
-2.44.0
+2.45.1
 

buildroot-external/patches/linux/0092-serial-sunplus-uart-Use-port-lock-wrappers.patch

@@ -1,7 +1,7 @@
-From 1932ef3f8abb0d8bd225c3a4e1ee829c61fb9fdf Mon Sep 17 00:00:00 2001
+From 71bb6e938e8f3b5575787a6e86c609e7ade985fb Mon Sep 17 00:00:00 2001
 From: Thomas Gleixner <tglx@linutronix.de>
 Date: Thu, 14 Sep 2023 20:44:23 +0206
-Subject: [PATCH 092/198] serial: sunplus-uart: Use port lock wrappers
+Subject: [PATCH 092/196] serial: sunplus-uart: Use port lock wrappers
 
 When a serial port is used for kernel console output, then all
 modifications to the UART registers which are done from other contexts,
@@ -147,5 +147,5 @@ index 3aacd5eb414c..4251f4e1ba99 100644
  	local_irq_restore(flags);
  }
 -- 
-2.44.0
+2.45.1
 

buildroot-external/patches/linux/0093-serial-sunsab-Use-port-lock-wrappers.patch

@@ -1,7 +1,7 @@
-From 278ee5a1d6e11f88fbd8dd7f08a722c3f0a48c6f Mon Sep 17 00:00:00 2001
+From 1a78999e5e39fae53bac42f870e5247ec3dac661 Mon Sep 17 00:00:00 2001
 From: Thomas Gleixner <tglx@linutronix.de>
 Date: Thu, 14 Sep 2023 20:44:24 +0206
-Subject: [PATCH 093/198] serial: sunsab: Use port lock wrappers
+Subject: [PATCH 093/196] serial: sunsab: Use port lock wrappers
 
 When a serial port is used for kernel console output, then all
 modifications to the UART registers which are done from other contexts,
@@ -177,5 +177,5 @@ index 40eeaf835bba..6aa51a6f8063 100644
  	return 0;
  }
 -- 
-2.44.0
+2.45.1
 

buildroot-external/patches/linux/0094-serial-sunsu-Use-port-lock-wrappers.patch

@@ -1,7 +1,7 @@
-From cd6e22436efc826fa3762bc274700b39a875fddc Mon Sep 17 00:00:00 2001
+From b0902b28c8707ce4c7cee3539b8085ceb6efe005 Mon Sep 17 00:00:00 2001
 From: Thomas Gleixner <tglx@linutronix.de>
 Date: Thu, 14 Sep 2023 20:44:25 +0206
-Subject: [PATCH 094/198] serial: sunsu: Use port lock wrappers
+Subject: [PATCH 094/196] serial: sunsu: Use port lock wrappers
 
 When a serial port is used for kernel console output, then all
 modifications to the UART registers which are done from other contexts,
@@ -220,5 +220,5 @@ index 58a4342ad0f9..1e051cc2591c 100644
  
  /*
 -- 
-2.44.0
+2.45.1