* Version 2.0.34 - Blacklisted names are now also blocked if they appear in `CNAME` pointers. - `dnscrypt-proxy` can now act as a local DoH *server*. Firefox can be configured to use it, so that ESNI can be enabled without bypassing your DNS proxy. * Version 2.0.33 - Fixes an issue that caused some valid queries to return `PARSE_ERROR`. * Version 2.0.32 - On certificate errors, the server name is now logged instead of the provider name, which is generally more useful. - IP addresses for DoH servers that require DNS lookups are now cached for at least 12 hours. - `ignore_system_dns` is now set to `true` by default. - A workaround for a bug in Cisco servers has been implemented. - A corrupted or incomplete resolvers list is now ignored, keeping the last good known cached list until the next update. In addition, logging was improved and unit tests were also added. Awesome contribution from William Elwood, thanks! - On Windows, the network probe immediately returned instead of blocking if `netprobe_timeout` was set to `-1`. This has been fixed. - Expired cached IP addresses now have a grace period, to avoid breaking the service if they temporarily can't be refreshed. - On Windows, the service now returns immediately, solving a long-standing issue when initialization took more than 30 seconds ("The service did not respond to the start or control request in a timely fashion"). Fantastic work by Alison Winters, thanks! - The `SERVER_ERROR` error code has been split into two new error codes: `NETWORK_ERROR` (self-explanatory) and `SERVFAIL` (a response was returned, but it includes a `SERVFAIL` error code). - Responses are now always compressed. * Version 2.0.31 - This version fixes two regressions introduced in version 2.0.29: DoH server couldn't be reached over IPv6 any more, and the proxy couldn't be interrupted while servers were being benchmarked. * Version 2.0.30 - This version fixes a startup issue introduced in version 2.0.29, on systems for which the service cannot be automatically installed (such as OpenBSD and FreeBSD). Reported by @5ch17 and Vinícius Zavam, and fixed by Will Elwood, thanks! * Version 2.0.29 - Support for Anonymized DNS has been added! - Wait before stopping, fixing an issue with Unbound (thanks to Vladimir Bauer) - DNS stamps are now included in the -list-all -json ouptut - The netprobe_timeout setting from the configuration file or command-line was ignored. This has been fixed. - The TTL or cloaked entries can now be adjusted (thanks to Markus Linnala) - Cached IP address from DoH servers now expire (thanks to Markus Linnala) - DNSCrypt certificates can be fetched over Tor and SOCKS proxies - Retries over TCP are faster - Improved logging (thanks to Alison Winters) - Ignore non-TXT records in certificate responses (thanks to Vladimir Bauer) - A lot of internal cleanups, thanks to Markus Linnala. * Version 2.0.28 - Invalid server entries are now skipped instead of preventing a source from being used. Thanks to Alison Winters for the contribution! - Truncated responses are immediately retried over TCP instead of waiting for the client to retry. This reduces the latency for large responses. - Responses sent to the local network are assumed to support at least 1252 bytes packets, and use optional information from EDNS up to 4096 bytes. This also reduces latency. - Logging improvements: servers are not logged for cached, synthetic and cloaked responses. And the forwarder is logged instead of the regular server for forwarded responses. * Version 2.0.27 - The X25519 implementation was changed from using the Go standard implementation to using Cloudflare's CIRCL library. Unfortunately, CIRCL appears to be broken on big-endian systems. That change has been reverted. - All the dependencies have been updated. * Version 2.0.26 - A new plugin was added to prevent Firefox from bypassing the system DNS settings. - New configuration parameter to set how to respond to blocked queries: `blocked_query_response`. Responses can now be empty record sets, REFUSED response codes, or predefined IPv4 and/or IPv6 addresses. - The `refused_code_in_responses` and `blocked_query_response` options have been folded into a new `blocked_query_response` option. - The fallback resolver is now accessed using TCP if `force_tcp` has been set to `true`. - CPU usage when enabling DNSCrypt ephemeral keys has been reduced. - New command-line option: `-show-certs` to print DoH certificate hashes. - Solaris packages are now provided. - DoH servers on a non-standard port, with stamps that don't include IP addresses, and without working system resolvers can now be properly bootstrapped. - A new option, `query_meta`, is now available to add optional records to client queries. * Version 2.0.25 - The example IP address for network probes didn't work on Windows. The example configuration file has been updated and the fallback resolver IP is now used when no netprobe address has been configured. * Version 2.0.24 - The query log now includes the time it took to complete the transaction, the name of the resolver that sent the response and if the response was served from the cache. Thanks to Ferdinand Holzer for his help! - The list of resolvers, sorted by latency, is now printed after all the resolvers have been probed. - The "fastest" load-balancing strategy has been renamed to "first". - On Windows, a nul byte is sent to the netprobe address. This is required to check for connectivity on this platform. Thanks to Mathias Berchtold. - The Malwaredomainlist URL was updated to directly parse the host list. Thanks to Encrypted.Town. - The Python script to generate lists of blacklisted domains is now compatible both with Python 2 and Python 3. Thanks to Simon R. - A warning is now displayed for DoH is requested but the server doesn't speak HTTP/2. - A crash with loaded-balanced sets of cloaked names was fixed. Thanks to @inkblotadmirer for the report. - Resolvers are now tried in random order to avoid favoring the first ones at startup. * Version 2.0.23 - Binaries for FreeBSD/armv7 are now available. - .onion servers are now automatically ignored if Tor routing is not enabled. - Caching of server addresses has been improved, especially when using proxies. - DNSCrypt communications are now automatically forced to using TCP when a SOCKS proxy has been set up. * Version 2.0.22 - The previous version had issues with the .org TLD when used in conjunction with dnsmasq. This has been fixed. * Version 2.0.21 - The change to run the Windows service as `NT AUTHORITY\NetworkService` has been reverted, as it was reported to break logging (Windows only). * Version 2.0.20 - Startup is now *way* faster, especially when using DoH servers. - A new action: `CLOAK` is logged when queries are being cloaked. - A cloaking rule can now map to multiple IPv4 and IPv6 addresses, with load-balancing. - New option: `refused_code_in_responses` to return (or not) a `REFUSED` code on blacklisted queries. This is disabled by default, in order to work around a bug in Android Pie. - Time-based restrictions are now properly handled in the generate-domains-blacklist.py script. - Other improvements have been made to the `generate-domains-blacklist.py` script. - The Windows service is now installed as `NT AUTHORITY\NetworkService`. * Version 2.0.19 - The value for `netprobe_timeout` was read from the command-line, but not from the configuration file any more. This is a regression introduced in the previous version, that has been fixed. - The default value for netprobe timeouts has been raised to 60 seconds. - A hash of the body is added to query parameters when sending DoH queries with the POST method in order to work around badly configured proxies. * Version 2.0.18 - Official builds now support TLS 1.3. - The timeout for the initial connectivity check can now be set from the command line. - An `Accept:` header is now always sent with `GET` queries. - BOMs are now ignored in configuration files. - In addition to SOCKS, HTTP and HTTPS proxies are now supported for DoH servers. * Version 2.0.17 - Go >= 1.11 is now supported - The flipside is that Windows XP is not supported any more :( - When dropping privileges, there is no supervisor process any more. - DNS options used to be cleared from DNS queries, with the exception of flags and payload sizes. This is not the case any more. - DoH queries are smaller, since workarounds are not required any more after Google updated their implementation. * Version 2.0.16 - On Unix-like systems, the server can run as an unprivileged user, and the main process will automatically restart if an error occurs. - pledge() on OpenBSD. - New "offline" mode to serve queries locally without contacting any upstream servers. This can be especially useful along with the cloaking module for local development. - New logo. - TTL of OPT records is properly ignored by the caching module. - The proxy doesn't quit any more if new TCP connections cannot be created. * Version 2.0.15 - Support for proxies (HTTP/SOCKS) was added. All it takes to route all TCP queries to Tor is add `proxy = "socks5://127.0.0.1:9050"` to the configuration file. - Querylog files have a new record indicating the outcome of each transaction. - Pre-built binaries for Linux are statically linked on all architectures. * Version 2.0.14 - Supports DNS-over-HTTPS draft 08. - Netprobes don't use port 0 by default, as this causes issues with Little Snitch and FreeBSD. * Version 2.0.13 - This version fixes a crash when using DoH for queries whose size were a multiple of the block size. Reported by @char101, thanks! * Version 2.0.12 - Further compatibility fixes for Alpine Linux/i386 and Android/i386 have been made. Thanks to @aead for his help! - The proxy will now wait for network connectivity before starting. This is useful if the proxy is automatically started at boot, possibly before the network is fully configured. - The IPv6 blocking module now returns synthetic SOA records to improve compatibility with downstream resolvers and stub resolvers. * Version 2.0.11 - This release fixes a long-standing bug that caused the proxy to block or crash when Position-Independent Executables were produced. This bug only showed up when compiled on (not for) Alpine Linux and Android, for some CPU architectures. - New configuration settings: cache_neg_min_ttl and cache_neg_max_ttl, to clamp the negative caching TTL. * Version 2.0.10 - This version fixes a crash when an incomplete size is sent by a local client for a query over TCP. - Slight performance improvement of DNSCrypt on non-Intel CPUs such as Raspberry Pi. * Version 2.0.9 - Whitelists have been implemented: one a name matches a pattern in the whitelist, rules from the name-based and IP-based blacklists will be bypassed. Whitelists support the same patterns as blacklists, as well as time-based rules, so that some website can be normally blocked, but accessible on specific days or times of the day. - Lists are now faster to load, and large lists require significantly less memory than before. - New options have been added to disable TLS session tickets as well as use a specific cipher suite. See the example configuration file for a recommended configuration to speed up DoH servers on ARM such as Android devices and Raspberry Pi. - The `-service install` command now remembers what the current directory was when the service was installed, in order to later load configuration files with relative paths. - DoH: The "Cache-Control: max-age" header is now ignored. - Patterns can now be prefixed with `=` to do exact matching: `=example.com` matches `example.com` but will not match `www.example.com`. - Patterns are now fully supported by the cloaking module. - A new option was added to use a specific cipher suite instead of the server's provided one. Using RSA+ChaChaPoly over ECDSA+AES-GCM has shown to decrease CPU usage and latency when connecting to Cloudflare, especially on Mips and ARM systems. - The ephemeral keys mode of dnscrypt-proxy v1.x was reimplemented: this creates a new unique key for every single query. * Version 2.0.8 - Multiple URLs can be defined for a source in order to improve resiliency when servers are temporarily unreachable. - Connections over IPv6 will be preferred over IPv4 for DoH servers when using a fallback resolver if `ipv6_servers` is set. - Improvements have been made to the example systemd configuration files. - The chacha20 implementation was updated to possibly fix a bug on Android/x86. - `generate-domains-blacklist.py` can now parse dnsmasq-style rules. - FreeBSD/arm builds have been added. - `dnscrypt-proxy -list -json` and `-list-all -json` now include the remove servers names and IP addresses. * Version 2.0.7 - Bug fix: optional ports were not properly parsed with IPv6 addresses -- thanks to @bleeee for the report and fix. - Bug fix: truncate TCP queries to the prefixed length. - Certificates are force-refreshed after a time jump (e.g. when a system resumes from hibernation). * Version 2.0.6 - Automatic log files rotation was finally implemented. - A new -pidfile command-line option to write the PID file was added. * Version 2.0.5 - Fixes a crash occasionally happening when using DoH servers, with stamps not containing any IP addresses, a DNSSEC-signed name, a non-working system DNS configuration, and a fallback server supporting DNSSEC. * Version 2.0.4 - Fixes a regression with truncated packets. Thanks to @mazesy and @the-w1nd for spotting a case triggering this! * Version 2.0.3 - Load balancing: resolvers that respond promptly, but with bogus responses are now gradually removed from the preferred pool. - Due to popular request, Android binaries are now available! Thanks to @sporif for his help on getting these built. - Binaries are built using Go 1.10-final. * Version 2.0.2 - Properly error out on FreeBSD and other platforms where built-in service installation is not supported yet. - Improved load-balancing algorithm, which should result in lower latency. * Version 2.0.1 - Cached source data were not redownloaded if the proxy was used without interruption. This has been fixed. - If the network is down at startup time, fall back to cached source data, even if is it out of date, and schedule an immediate update after the networks is back. - RTT estimation for DNS-over-HTTP/2 servers was off. This has been fixed. - The generate-domains-blacklist script now has a configurable timeout value, and can produce time-based rules. - The timeout parameter in the example configuration file didn't had the correct name; this has been fixed. - Cache: TTLs are now decreasing.