{Front,Side,Back}ElementIsCpe is an array (per-channel). The check for
pPce->{Front,Side,Back}ElementIsCpe without an index checks the address
of the array, and will always evaluate to true. The elTagSce++
statements are unreachable.
Change-Id: If530371788a44038c500d6f9f7ac67681f77cc71
This code depends on narrowing hex literals to a signed long, which
trips -Wc++11-narrowing (the fix would be to explicitly cast each
value to signed).
Change-Id: I581a02ef0eeee5a2d95ce0ff2ec6f7ff26f3a074
Revise decoder output delay determination. The output delay consisted of
concealment and limiter delay. SBR delay was not covered but must be
considered for gapless playback delay compensation.
Bug 9428126
Change-Id: I67483712c284de9b5378694f9db7acbed2547dd7
Provide relevant DRC metadata information via API needed for DRC
presentation mode wrapper.
Bug 9428126
Change-Id: I827cd6bdfd2a8799c21935ae32af23739c90a9b6
Improve flushing and seeking.
Add field to the API stream info structure signaling the additional output
delay for flushing and delay compensation.
Bug 9428126
Change-Id: I808412905563ea3de50a2e77a9b5dfee829cd2ed
Introduce time domain limiter. The module is per default enabled for all
AAC-LC and HE-AAC v1/2 streams. For all ER-AAC-LD and ER-AAC-ELD streams
the limiter is disabled per default. The feature can be en- or disabled
via dynamic API parameter. Note that the limiter introduces an additional
output delay which depends on the module parameters and the streams
sampling rate.
Bug 9428126
Change-Id: I299a072340b33e2c324facbd347a72c8de3d380e
The libSYS/include/machine_type.h header file states LONG should be
"Data type representing 4 byte signed integer on all supported
platforms" but only provided for defining LONG as INT and ULONG as
UINT when __x86_64__ was defined. This has been changed to when
__LP64__ is defined, so that it also applies to AArch64. The change
to libFDK/include/common_fix.h is then needed to get the project to
compile.
Change-Id: Iea42d7eca97dcc9da772a05b207d134cb999a72a
Signed-off-by: Marcus Oakland <marcus.oakland@arm.com>
* AAC-Encoder
- Introduce ELD auto configurator to get predefined configuration at given
bitrate and sampling rate. The configurator selects SBR on/off and if SBR
enabled distinguishes between dualrate and downsampled SBR. In default
configuration the ELD auto configurator is enabled.
Modified file(s):
libAACenc\include\aacenc_lib.h
libAACenc\src\aacenc_lib.cpp
Bug 9428126
Change-Id: I01acc9c37e57c4154b3a818d496d538b7f8b227d
* AAC-Encoder
- Revise explicit signaling method which is required for downsampled SBR.
The parameter is optional and default configuration is implicit signaling
for dualrate SBR as before. In case of downsampled SBR and HE-AAC explicit
signaling is configured as default.
Modified file(s):
documentation\aacEncoder.pdf
libAACenc\include\aacenc_lib.h
libAACenc\src\aacenc_lib.cpp
libMpegTPEnc\src\tpenc_asc.cpp
libMpegTPEnc\src\version
libSYS\include\FDK_audio.h
libSYS\src\genericStds.cpp
Bug 9428126
Change-Id: I35138140346f17384d109ee5829be9ea5bab80fc
* AAC-Decoder
- Improved PCE handling for saver (re-)configuration and metadata processing.
Modified file(s):
libAACdec/src/aacdecoder.cpp
libAACdec/src/aacdecoder_lib.cpp
- Transport layer changes (config found) -> to be evaluated.
Modified file(s):
libMpegTPDec/include/tpdec_lib.h
libMpegTPDec/src/tpdec_latm.h
libMpegTPDec/src/version
libMpegTPDec/src/tpdec_asc.cpp
libMpegTPDec/src/tpdec_lib.cpp
libMpegTPDec/src/tpdec_adts.cpp
libMpegTPDec/src/tpdec_latm.cpp
libSYS/include/FDK_audio.h
libSYS/src/genericStds.cpp
- Enable concealment state machine to skip states if the corresponding
parameter is set to zero.
Modified file(s):
libAACdec/src/conceal.cpp
- Add some more sanity checks to avoid segmentation faults especially when
setting dynamic API params.
Modified file(s):
libAACdec/src/aacdecoder_lib.cpp
- Fix to do a fail-safe initialization of IMDCT for all channels even with
corrupt streams.
Modified file(s):
libAACdec/src/aacdecoder.cpp
- HCR decoder fix (remove warnings).
Modified file(s):
libAACdec/src/block.cpp
- Fix border calculation in SBR decoder's LPP transposer patch determination.
Modified file(s):
libSBRdec/src/env_dec.cpp
libSBRdec/src/sbrdecoder.cpp
libSBRdec/src/lpp_tran.cpp
Bug 9428126
Change-Id: Ib415b702b88a7ec8e9a55789d79cafb39296d26b
* AAC-Decoder
- Only set the program reference level if it has changed compared to the
previous value. This allows setting it on a frame-by-frame basis without
limitations.
Modified file(s):
libAACdec/src/aacdec_drc.cpp
libAACdec/src/aacdec_drc.h
- Add expiry counter for the program reference level.
Modified file(s):
libAACdec/src/aacdec_drc.cpp
libAACdec/src/aacdec_drc_types.h
- Disable scaling of light compression gain values when heavy compression
mode is enabled to have the full light compression as fallback if no heavy
values are available.
Modified file(s):
libAACdec/src/aacdec_drc.cpp
libAACdec/src/aacdecoder_lib.cpp
libAACdec/src/aacdec_drc_types.h
- Change initialization and channel disabling to improve start-up behavior in
SBR decoder.
Modified file(s):
libSBRdec/src/sbrdecoder.cpp
libSBRdec/src/sbrdec_drc.cpp
Bug 9428126
Change-Id: Ie1d3949c53910506da2547d32fe3bf6ee7606eb4
AAC encoder: Connect SBR and PS header repetition rate with AACENC_HEADER_PERIOD
parameter of the encoder API.
Bug 9428126
Change-Id: Ia1ab965de9eaa2ac229d0c395a337cbd4d20cba1
AAC encoder: Make the bit rate limiting functionality more stable for multichannel
configurations where element bit rate for SBR can differ significantly.
Bug 9428126
Change-Id: I35b134c5b3c160a8f5a16b4314782b731fe49cd8
SBR encoder: Introduce coupling energy ratio limitation to prevent undesirable SBR band
amplification while decoding.
Bug 9428126
Change-Id: I18a77cd1a178fff7531b490779a29a0df7d993af
AAC Encoder: Saturate quantizer shift value to prevent
undefined behaviour.
In very rare cases the shift value 'totalShift = (16-4)-(3*(totalShift>>2))'
can be greater than accu data width. If you apply a shift with more then
31 bit the result depends on the architecture and is not defined in C.
For certain platforms zeros are shifted in. That would be our desired behaviour.
On other platforms the shift will be applied as modulo. For example >>34
would be applied as >>2. To prevent this discrepancy the shift value
is limited/saturated to DFRACT_BITS-1. 'accu >>= fixMin(totalShift,DFRACT_BITS-1)'.
Bug 9428126
Change-Id: I27177654c4dc22cf899bc35dad9cdd040dccb02d
* AAC-Encoder
- Remove source snippets related to unsupported frame length of 960.
- Adjust minBits initialization for disabled VBR configuration.
Modified file(s):
libAACenc/src/aacenc.h
libAACenc/src/aacenc_lib.cpp
libAACenc/src/aacenc_tns.cpp
libAACenc/src/bandwidth.cpp
libAACenc/src/psy_const.h
libAACenc/src/transform.h
- Revise encoder parameter restrictions: "Error Resilient(ER) AAC Low Complexity"
is not supported. Where the AAC part of the FDK encoder threw an
initialization error, now the aacEncoder_SetParam() returns an error
before initialization if the application tries to configure this
audio object type.
Modified file(s):
libAACenc/src/aacenc_lib.cpp
* SYS-Library
- Portability fix for Mingw32.
Modified file(s):
libSYS/include/machine_type.h
- Minor changes.
Modified file(s):
libSYS/include/wav_file.h
libSYS/src/wav_file.cpp
libSYS/src/cmdl_parser.cpp
libSYS/src/genericStds.cpp
Bug 9428126
Change-Id: I9fa44923d34f033d0dc607f2b85abacb8a85eb61
- Update disclaimer in all source files.
- Increment library version in each FDK sub-module.
Bug 9428126
Change-Id: I490b96d4ee472246b01483202b0bb4f1e9c2a5d7
From Fraunhofer:
* AAC Decoder
- Stick to the written MPEG standard instead of the MPEG reference software
in terms of reference level normalization. Always set the program reference
level equal to the target level. This disables level normalization using a
default level for streams without embedded metadata.
Modified file(s):
libAACdec\src\aacdec_drc.cpp
- Fix downmix channel assignment when using a WAV output channel ordering.
Modified file(s):
libPCMutils\src\pcmutils_lib.cpp
- Retain signal accuracy and prevent LSB alteration when no level correction
needs to be done.
Modified file(s):
libAACdec\src\aacdec_drc.h
libAACdec\src\aacdec_drc.cpp
libSBRdec\src\sbrdecoder.cpp
libSBRdec\src\sbr_dec.cpp
libSBRdec\src\sbrdec_drc.cpp
- Align metadata processing with reference implementation.
Modified file(s):
libAACdec\src\aacdec_drc.h
libAACdec\src\aacdecoder.cpp
* AAC-Encoder
- Prevent potential overflow in energy calculation after TNS processing.
Modified file(s):
libAACenc\src\band_nrg.cpp
- Added saturation for number of relevant lines which are used in pe
calculation.
Modified file(s):
libAACenc\src\line_pe.cpp
- Removed obsolete files.
Deleded file(s):
libAACenc\src\tns_param.h
libAACenc\src\tns_param.cpp
* FDK-Library
- Added x86 Count Leading Zeros intrinsic.
Modified file(s):
libFDK\include\clz.h
Added file(s):
libFDK\include\x86\clz_x86.h
- Fixed compilation for MIPS GCC-4.4 and higher.
Modified file(s):
libFDK\include\mips\cplx_mul.h
libFDK\include\mips\fixmul_mips.h
Change-Id: I4be65f07f88d412224c7fddc3f054e8f451176cc
Chih-Hung Hsieh
Dan Albert
Glenn Kasten
Keun-young Park
Duane Sand
Jean-Michel Trivi
Marcus Oakland
Elliott Hughes
John Grossman