This probably doesn't fix the root cause, but at least fixes
the issues found in this particular fuzzed sample.
Compared to the previous fix in 39e13c1acb,
this doesn't break HE-AACv2 encoding, by allowing the case with
usb==no_channels.
Fixes: 1973/clusterfuzz-testcase-minimized-6319232084082688
Found-by: continuous fuzzing process https://github.com/google/oss-fuzz/tree/master/projects/ffmpeg
This reverts commit 39e13c1acb.
This turned out to break HE-AACv2 encoding. Will look for a better
fix for the issue found by the fuzzed sample.
This fixes issue #69.
This probably doesn't fix the root cause, but at least fixes
the issues found in this particular fuzzed sample.
Fixes: 1973/clusterfuzz-testcase-minimized-6319232084082688
Found-by: continuous fuzzing process https://github.com/google/oss-fuzz/tree/master/projects/ffmpeg
Clang warns about this being deprecated, when building without specifying
-std=c++98.
This doesn't give any measurable encoding speed impact on ARM or AArch64,
on neither GCC nor Clang.
Change-Id: I63a0bbd1dccb97547522da188ee585d4d8127c29
This fixes building in C++11 mode, which normally errors out
on narrowing hex literals to signed long.
This is similar to what was done in git commit ef30836651
(change id I64d19a8a8059c5a96386b1eaac297fd2469515f8), completing
the fix for that category of issues.
Change-Id: I1907bc947d43bf44910fb2b34bf2b31c0e53aa53
The fixmuldiv functions don't need inline assembly to be fast
in this architecture; the compiler (both clang and GCC) figure
out to use the optimal instructions for this (which is 2 instruction
sequence), and when letting the compiler emit the instructions
instead of using inline assembly, the compiler is able to
interleave those instructions with other instructions,
improving scheduling, making it even faster than when using
inline assembly.
Overall, this gives about 50% speedup.
* AAC-Decoder
- Add support for AOT 20 (ER-AAC scalable) (base layer only)
- Add support for AAC as used in Digital Radio Mondiale (DRM30/DRM+)
Modified file(s):
libAACdec/src/aacdecoder.cpp
libAACdec/src/aacdecoder_lib.cpp
libFDK/src/FDK_core.cpp
libFDK/src/FDK_tools_rom.cpp
libMpegTPDec/src/tpdec_asc.cpp
libMpegTPDec/src/tpdec_lib.cpp
libMpegTPDec/src/version
libSBRdec/include/sbrdecoder.h
libSBRdec/src/env_extr.h
libSBRdec/src/sbrdecoder.cpp
Added file(s):
libMpegTPDec/src/tpdec_drm.cpp
libMpegTPDec/src/tpdec_drm.h
- Fix sanity check in HCR module that was performed at the wrong point in time.
Modified file(s):
libAACdec/src/aacdecoder_lib.cpp
libAACdec/src/block.cpp
- Extend core sampling rate support up to 96 kHz.
Modified file(s):
libAACdec/src/aac_rom.cpp
libAACdec/src/aacdecoder.cpp
libAACdec/src/aacdecoder_lib.cpp
- Return correct audio output channel description according number of output
channels.
Modified file(s):
libAACdec/src/aacdecoder_lib.cpp
- Indroduce decoder intern output buffer. This change allows to use framework
output buffer with the actual size of the deocder output channels.
Modified file(s):
libAACdec/include/aacdecoder_lib.h
libAACdec/src/aacdecoder.h
libAACdec/src/aacdecoder_lib.cpp
* SBR-Decoder
- Increase robustness for erroneous input data.
- Improve error concealment performance.
- Fix handling of lowest sub-band for LD-SBR
Modified file(s):
libAACdec/src/aacdecoder.cpp
libAACdec/src/aacdecoder_lib.cpp
libSBRdec/src/env_calc.cpp
libSBRdec/src/env_dec.cpp
libSBRdec/src/env_extr.cpp
libSBRdec/src/env_extr.h
libSBRdec/src/sbr_dec.cpp
libSBRdec/src/sbr_rom.cpp
libSBRdec/src/sbr_rom.h
libSBRdec/src/sbrdecoder.cpp
- Add QMF delay compensation for ELD v2 streams decoded with the complex
low delay filter-bank.
Modified file(s):
libSBRdec/src/sbr_dec.cpp
libSBRdec/src/sbr_dec.h
libSBRdec/src/sbrdecoder.cpp
- Introduce a different handling of frames to be flushed
dependent on whether there are delayed frames available or not.
Modified file(s):
libSBRdec/src/sbr_ram.h
libSBRdec/src/sbrdecoder.cpp
- Calculate the correct number of samples for dual-mono copy in case of no
available PS data.
Modified file(s):
libSBRdec/src/sbrdecoder.cpp
* SYS-Library
- Change include order of genericStds.h to prevent conflict with definitions
which are also used in math.h.
Modified file(s):
libSYS/src/genericStds.cpp
Change-Id: I3ecffbad85f39b056213107955cfadbeb3f4b6e1
Building __DATE__/__TIME__ into the binaries means that every build will
create different binaries, even if all the sources are identical. This
also means that any libraries including this one will need to be patched
during every OTA.
Nothing appears to use the build_date/build_time fields, so just replace
them with empty strings.
Bug: 24204119
Change-Id: I9543eb388a1e8ab9284df9035a62fc8942cdc082
Replace the assembler code by the equivalent in C. This way it will work
for every MIPS ISA. Now the check for __mips_isa_rev < 6 is no longer
necessary, so remove it.
Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Only enable code using mips32/mips64 instructions if the compiler is targetting
this ISA. (integer madd and msub instructions aren't available in the
``canonical'' mips ISAs)
This is a bug fix patch from Fraunhofer, amending/replacing/extending
the previous commit which only extended the table to 55 elements.
(In my previous fix, 55 seemed to be enough for the issue at hand at
least. A few of the coefficients had slightly different rounding than
what Fraunhofer had used though).
This will show up in AOSP in the next code drop as well.
For sample rates >= 64 kHz with short blocks, the largest sfb
width is 36, which after grouping can be multiplied with 3,
ending up as 108. GetInvInt needs to be able to support
the largest grouped sfb width, divided by two (3 * 36 / 2 = 54).
This fixes VBR encoding with sample rates >= 64 kHz.
The libSYS/include/machine_type.h header file states LONG should be
"Data type representing 4 byte signed integer on all supported
platforms" but only provided for defining LONG as INT and ULONG as
UINT when __x86_64__ was defined. This has been changed to when
__LP64__ is defined, so that it also applies to AArch64. The change
to libFDK/include/common_fix.h is then needed to get the project to
compile.
Change-Id: Iea42d7eca97dcc9da772a05b207d134cb999a72a
Signed-off-by: Marcus Oakland <marcus.oakland@arm.com>
- Update disclaimer in all source files.
- Increment library version in each FDK sub-module.
Bug 9428126
Change-Id: I490b96d4ee472246b01483202b0bb4f1e9c2a5d7
From Fraunhofer:
* AAC Decoder
- Stick to the written MPEG standard instead of the MPEG reference software
in terms of reference level normalization. Always set the program reference
level equal to the target level. This disables level normalization using a
default level for streams without embedded metadata.
Modified file(s):
libAACdec\src\aacdec_drc.cpp
- Fix downmix channel assignment when using a WAV output channel ordering.
Modified file(s):
libPCMutils\src\pcmutils_lib.cpp
- Retain signal accuracy and prevent LSB alteration when no level correction
needs to be done.
Modified file(s):
libAACdec\src\aacdec_drc.h
libAACdec\src\aacdec_drc.cpp
libSBRdec\src\sbrdecoder.cpp
libSBRdec\src\sbr_dec.cpp
libSBRdec\src\sbrdec_drc.cpp
- Align metadata processing with reference implementation.
Modified file(s):
libAACdec\src\aacdec_drc.h
libAACdec\src\aacdecoder.cpp
* AAC-Encoder
- Prevent potential overflow in energy calculation after TNS processing.
Modified file(s):
libAACenc\src\band_nrg.cpp
- Added saturation for number of relevant lines which are used in pe
calculation.
Modified file(s):
libAACenc\src\line_pe.cpp
- Removed obsolete files.
Deleded file(s):
libAACenc\src\tns_param.h
libAACenc\src\tns_param.cpp
* FDK-Library
- Added x86 Count Leading Zeros intrinsic.
Modified file(s):
libFDK\include\clz.h
Added file(s):
libFDK\include\x86\clz_x86.h
- Fixed compilation for MIPS GCC-4.4 and higher.
Modified file(s):
libFDK\include\mips\cplx_mul.h
libFDK\include\mips\fixmul_mips.h
Change-Id: I4be65f07f88d412224c7fddc3f054e8f451176cc
Latest code drop from Fraunhofer:
* AAC-Decoder
- Expanded AAC-LD/ELD decoder TNS max band tables to avoid wrong data
access for sampling rates <22kHz and >48kHz.
Modified file(s):
libAACdec\src\aacdec_tns.cpp
libAACdec\src\aac_rom.h
libAACdec\src\aac_rom.cpp
- Fixed ELD synthesis QMF filterbank scaling for downsampled SBR.
Modified file(s):
libFDK\src\qmf.cpp
* AAC-Encoder
- Fixed bit rate limiting for lower limit as introduced in the Delivery 2012-05-11.
Modified file(s):
libAACenc\include\aacenc_lib.h
libAACenc\src\aacenc.h
libAACenc\src\aacenc.cpp
libSBRenc\src\sbr_rom.h
libSBRenc\src\sbr_rom.cpp
- Allow negative prediction gain as meaning that there is no coding gain.
Make use of scaleValueSaturate in gauss window calculation.
Modified file(s):
libAACenc\src\aacenc_tns.cpp
- Added energy saturation to prevent overflow in short blocks.
Modified file(s):
libAACenc\src\grp_data.cpp
- Perform scalefactor adaption in case quantized lines are out of valid range.
Modified file(s):
libAACenc\src\quantize.cpp
- Interrupt quantization loop when no spectral data is available.
Adjustments in bitreservoir adaption.
Modified file(s):
libAACenc\src\qc_main.cpp
- Indroduced dynamic scaling in none missing harmonic energy lowering compensation.
Modified file(s):
libSBRenc\src\env_est.cpp
* FDK-Library
- Fixed saturation for negative values in scaleValueSaturate.
Modified file(s):
libFDK\include\scale.h
Change-Id: If830ea65caef6b5554281e4b7a77a8b2e08825ce
Martin Storsjo
Fraunhofer IIS FDK
Robert Kausch
Lexyan
Guillaume Smaha
Jean-Michel Trivi
Timothy Gu
Dan Willemsen
Vicente Olivert Riera
Jasper Lievisse Adriaanse
Duane Sand
Mark Harris
Glenn Kasten
Marcus Oakland
Keun young Park
Raghu Gandham
The Android Open Source Project