cef/libcef/browser/browser_info.h

261 lines
10 KiB
C
Raw Normal View History

// Copyright (c) 2012 The Chromium Embedded Framework Authors. All rights
// reserved. Use of this source code is governed by a BSD-style license that can
// be found in the LICENSE file.
#ifndef CEF_LIBCEF_BROWSER_BROWSER_INFO_H_
#define CEF_LIBCEF_BROWSER_BROWSER_INFO_H_
#pragma once
#include <queue>
#include <set>
Move message routing from CefBrowser to CefFrame (see issue #2498). This change moves the SendProcessMessage method from CefBrowser to CefFrame and adds CefBrowser parameters to OnProcessMessageReceived and OnDraggableRegionsChanged. The internal implementation has changed as follows: - Frame IDs are now a 64-bit combination of the 32-bit render_process_id and render_routing_id values that uniquely identify a RenderFrameHost (RFH). - CefFrameHostImpl objects are now managed by CefBrowserInfo with life span tied to RFH expectations. Specifically, a CefFrameHostImpl object representing a sub-frame will be created when a RenderFrame is created in the renderer process and detached when the associated RenderFrame is deleted or the renderer process in which it runs has died. - The CefFrameHostImpl object representing the main frame will always be valid but the underlying RFH (and associated frame ID) may change over time as a result of cross-origin navigations. Despite these changes calling LoadURL on the main frame object in the browser process will always navigate as expected. - Speculative RFHs, which may be created as a result of a cross-origin navigation and discarded if that navigation is not committed, are now handled correctly (e.g. ignored in most cases until they're committed). - It is less likely, but still possible, to receive a CefFrame object with an invalid frame ID (ID < 0). This can happen in cases where a RFH has not yet been created for a sub-frame. For example, when OnBeforeBrowse is called before initiating navigation in a previously nonexisting sub-frame. To test: All tests pass with NetworkService enabled and disabled.
2019-05-24 22:23:43 +02:00
#include <unordered_map>
#include "include/internal/cef_ptr.h"
#include "libcef/common/values_impl.h"
Move message routing from CefBrowser to CefFrame (see issue #2498). This change moves the SendProcessMessage method from CefBrowser to CefFrame and adds CefBrowser parameters to OnProcessMessageReceived and OnDraggableRegionsChanged. The internal implementation has changed as follows: - Frame IDs are now a 64-bit combination of the 32-bit render_process_id and render_routing_id values that uniquely identify a RenderFrameHost (RFH). - CefFrameHostImpl objects are now managed by CefBrowserInfo with life span tied to RFH expectations. Specifically, a CefFrameHostImpl object representing a sub-frame will be created when a RenderFrame is created in the renderer process and detached when the associated RenderFrame is deleted or the renderer process in which it runs has died. - The CefFrameHostImpl object representing the main frame will always be valid but the underlying RFH (and associated frame ID) may change over time as a result of cross-origin navigations. Despite these changes calling LoadURL on the main frame object in the browser process will always navigate as expected. - Speculative RFHs, which may be created as a result of a cross-origin navigation and discarded if that navigation is not committed, are now handled correctly (e.g. ignored in most cases until they're committed). - It is less likely, but still possible, to receive a CefFrame object with an invalid frame ID (ID < 0). This can happen in cases where a RFH has not yet been created for a sub-frame. For example, when OnBeforeBrowse is called before initiating navigation in a previously nonexisting sub-frame. To test: All tests pass with NetworkService enabled and disabled.
2019-05-24 22:23:43 +02:00
#include "base/containers/unique_ptr_adapters.h"
#include "base/functional/callback.h"
#include "base/memory/ref_counted.h"
Create a ChromeBrowserHostImpl for every Chrome tab (see issue #2969) The Browser object represents the top-level Chrome browser window. One or more tabs (WebContents) are then owned by the Browser object via TabStripModel. A new Browser object can be created programmatically using "new Browser" or Browser::Create, or as a result of user action such as dragging a tab out of an existing window. New or existing tabs can also be added to an already existing Browser object. The Browser object acts as the WebContentsDelegate for all attached tabs. CEF integration requires WebContentsDelegate callbacks and notification of tab attach/detach. To support this integration we add a cef::BrowserDelegate (ChromeBrowserDelegate) member that is created in the Browser constructor and receives delegation for the Browser callbacks. ChromeBrowserDelegate creates a new ChromeBrowserHostImpl when a tab is added to a Browser for the first time, and that ChromeBrowserHostImpl continues to exist until the tab's WebContents is destroyed. The associated WebContents object does not change, but the Browser object will change when the tab is dragged between windows. CEF callback logic is shared between the chrome and alloy runtimes where possible. This shared logic has been extracted from CefBrowserHostImpl to create new CefBrowserHostBase and CefBrowserContentsDelegate classes. The CefBrowserHostImpl class is now only used with the alloy runtime and will be renamed to AlloyBrowserHostImpl in a future commit.
2020-09-18 00:24:08 +02:00
#include "base/memory/weak_ptr.h"
#include "base/synchronization/lock.h"
#include "base/values.h"
#include "content/public/browser/global_routing_id.h"
#include "content/public/browser/render_frame_host.h"
Move message routing from CefBrowser to CefFrame (see issue #2498). This change moves the SendProcessMessage method from CefBrowser to CefFrame and adds CefBrowser parameters to OnProcessMessageReceived and OnDraggableRegionsChanged. The internal implementation has changed as follows: - Frame IDs are now a 64-bit combination of the 32-bit render_process_id and render_routing_id values that uniquely identify a RenderFrameHost (RFH). - CefFrameHostImpl objects are now managed by CefBrowserInfo with life span tied to RFH expectations. Specifically, a CefFrameHostImpl object representing a sub-frame will be created when a RenderFrame is created in the renderer process and detached when the associated RenderFrame is deleted or the renderer process in which it runs has died. - The CefFrameHostImpl object representing the main frame will always be valid but the underlying RFH (and associated frame ID) may change over time as a result of cross-origin navigations. Despite these changes calling LoadURL on the main frame object in the browser process will always navigate as expected. - Speculative RFHs, which may be created as a result of a cross-origin navigation and discarded if that navigation is not committed, are now handled correctly (e.g. ignored in most cases until they're committed). - It is less likely, but still possible, to receive a CefFrame object with an invalid frame ID (ID < 0). This can happen in cases where a RFH has not yet been created for a sub-frame. For example, when OnBeforeBrowse is called before initiating navigation in a previously nonexisting sub-frame. To test: All tests pass with NetworkService enabled and disabled.
2019-05-24 22:23:43 +02:00
Create a ChromeBrowserHostImpl for every Chrome tab (see issue #2969) The Browser object represents the top-level Chrome browser window. One or more tabs (WebContents) are then owned by the Browser object via TabStripModel. A new Browser object can be created programmatically using "new Browser" or Browser::Create, or as a result of user action such as dragging a tab out of an existing window. New or existing tabs can also be added to an already existing Browser object. The Browser object acts as the WebContentsDelegate for all attached tabs. CEF integration requires WebContentsDelegate callbacks and notification of tab attach/detach. To support this integration we add a cef::BrowserDelegate (ChromeBrowserDelegate) member that is created in the Browser constructor and receives delegation for the Browser callbacks. ChromeBrowserDelegate creates a new ChromeBrowserHostImpl when a tab is added to a Browser for the first time, and that ChromeBrowserHostImpl continues to exist until the tab's WebContents is destroyed. The associated WebContents object does not change, but the Browser object will change when the tab is dragged between windows. CEF callback logic is shared between the chrome and alloy runtimes where possible. This shared logic has been extracted from CefBrowserHostImpl to create new CefBrowserHostBase and CefBrowserContentsDelegate classes. The CefBrowserHostImpl class is now only used with the alloy runtime and will be renamed to AlloyBrowserHostImpl in a future commit.
2020-09-18 00:24:08 +02:00
class CefBrowserHostBase;
class CefFrameHandler;
Move message routing from CefBrowser to CefFrame (see issue #2498). This change moves the SendProcessMessage method from CefBrowser to CefFrame and adds CefBrowser parameters to OnProcessMessageReceived and OnDraggableRegionsChanged. The internal implementation has changed as follows: - Frame IDs are now a 64-bit combination of the 32-bit render_process_id and render_routing_id values that uniquely identify a RenderFrameHost (RFH). - CefFrameHostImpl objects are now managed by CefBrowserInfo with life span tied to RFH expectations. Specifically, a CefFrameHostImpl object representing a sub-frame will be created when a RenderFrame is created in the renderer process and detached when the associated RenderFrame is deleted or the renderer process in which it runs has died. - The CefFrameHostImpl object representing the main frame will always be valid but the underlying RFH (and associated frame ID) may change over time as a result of cross-origin navigations. Despite these changes calling LoadURL on the main frame object in the browser process will always navigate as expected. - Speculative RFHs, which may be created as a result of a cross-origin navigation and discarded if that navigation is not committed, are now handled correctly (e.g. ignored in most cases until they're committed). - It is less likely, but still possible, to receive a CefFrame object with an invalid frame ID (ID < 0). This can happen in cases where a RFH has not yet been created for a sub-frame. For example, when OnBeforeBrowse is called before initiating navigation in a previously nonexisting sub-frame. To test: All tests pass with NetworkService enabled and disabled.
2019-05-24 22:23:43 +02:00
class CefFrameHostImpl;
// CefBrowserInfo is used to associate a browser ID and render view/process
Create a ChromeBrowserHostImpl for every Chrome tab (see issue #2969) The Browser object represents the top-level Chrome browser window. One or more tabs (WebContents) are then owned by the Browser object via TabStripModel. A new Browser object can be created programmatically using "new Browser" or Browser::Create, or as a result of user action such as dragging a tab out of an existing window. New or existing tabs can also be added to an already existing Browser object. The Browser object acts as the WebContentsDelegate for all attached tabs. CEF integration requires WebContentsDelegate callbacks and notification of tab attach/detach. To support this integration we add a cef::BrowserDelegate (ChromeBrowserDelegate) member that is created in the Browser constructor and receives delegation for the Browser callbacks. ChromeBrowserDelegate creates a new ChromeBrowserHostImpl when a tab is added to a Browser for the first time, and that ChromeBrowserHostImpl continues to exist until the tab's WebContents is destroyed. The associated WebContents object does not change, but the Browser object will change when the tab is dragged between windows. CEF callback logic is shared between the chrome and alloy runtimes where possible. This shared logic has been extracted from CefBrowserHostImpl to create new CefBrowserHostBase and CefBrowserContentsDelegate classes. The CefBrowserHostImpl class is now only used with the alloy runtime and will be renamed to AlloyBrowserHostImpl in a future commit.
2020-09-18 00:24:08 +02:00
// IDs with a particular CefBrowserHostBase. Render view/process IDs may change
// during the lifetime of a single CefBrowserHostBase.
//
Move message routing from CefBrowser to CefFrame (see issue #2498). This change moves the SendProcessMessage method from CefBrowser to CefFrame and adds CefBrowser parameters to OnProcessMessageReceived and OnDraggableRegionsChanged. The internal implementation has changed as follows: - Frame IDs are now a 64-bit combination of the 32-bit render_process_id and render_routing_id values that uniquely identify a RenderFrameHost (RFH). - CefFrameHostImpl objects are now managed by CefBrowserInfo with life span tied to RFH expectations. Specifically, a CefFrameHostImpl object representing a sub-frame will be created when a RenderFrame is created in the renderer process and detached when the associated RenderFrame is deleted or the renderer process in which it runs has died. - The CefFrameHostImpl object representing the main frame will always be valid but the underlying RFH (and associated frame ID) may change over time as a result of cross-origin navigations. Despite these changes calling LoadURL on the main frame object in the browser process will always navigate as expected. - Speculative RFHs, which may be created as a result of a cross-origin navigation and discarded if that navigation is not committed, are now handled correctly (e.g. ignored in most cases until they're committed). - It is less likely, but still possible, to receive a CefFrame object with an invalid frame ID (ID < 0). This can happen in cases where a RFH has not yet been created for a sub-frame. For example, when OnBeforeBrowse is called before initiating navigation in a previously nonexisting sub-frame. To test: All tests pass with NetworkService enabled and disabled.
2019-05-24 22:23:43 +02:00
// CefBrowserInfo objects are managed by CefBrowserInfoManager and should not be
// created directly.
class CefBrowserInfo : public base::RefCountedThreadSafe<CefBrowserInfo> {
public:
CefBrowserInfo(int browser_id,
bool is_popup,
Move message routing from CefBrowser to CefFrame (see issue #2498). This change moves the SendProcessMessage method from CefBrowser to CefFrame and adds CefBrowser parameters to OnProcessMessageReceived and OnDraggableRegionsChanged. The internal implementation has changed as follows: - Frame IDs are now a 64-bit combination of the 32-bit render_process_id and render_routing_id values that uniquely identify a RenderFrameHost (RFH). - CefFrameHostImpl objects are now managed by CefBrowserInfo with life span tied to RFH expectations. Specifically, a CefFrameHostImpl object representing a sub-frame will be created when a RenderFrame is created in the renderer process and detached when the associated RenderFrame is deleted or the renderer process in which it runs has died. - The CefFrameHostImpl object representing the main frame will always be valid but the underlying RFH (and associated frame ID) may change over time as a result of cross-origin navigations. Despite these changes calling LoadURL on the main frame object in the browser process will always navigate as expected. - Speculative RFHs, which may be created as a result of a cross-origin navigation and discarded if that navigation is not committed, are now handled correctly (e.g. ignored in most cases until they're committed). - It is less likely, but still possible, to receive a CefFrame object with an invalid frame ID (ID < 0). This can happen in cases where a RFH has not yet been created for a sub-frame. For example, when OnBeforeBrowse is called before initiating navigation in a previously nonexisting sub-frame. To test: All tests pass with NetworkService enabled and disabled.
2019-05-24 22:23:43 +02:00
bool is_windowless,
chrome: Add support for Alloy style browsers and windows (see #3681) Split the Alloy runtime into bootstrap and style components. Support creation of Alloy style browsers and windows with the Chrome runtime. Chrome runtime (`--enable-chrome-runtime`) + Alloy style (`--use-alloy-style`) supports Views (`--use-views`), native parent (`--use-native`) and windowless rendering (`--off-screen-rendering-enabled`). Print preview is supported in all cases except with windowless rendering on all platforms and native parent on MacOS. It is disabled by default with Alloy style for legacy compatibility. Where supported it can be enabled or disabled globally using `--[enable|disable]-print-preview` or configured on a per-RequestContext basis using the `printing.print_preview_disabled` preference. It also behaves as expected when triggered via the PDF viewer print button. Chrome runtime + Alloy style behavior differs from Alloy runtime in the following significant ways: - Supports Chrome error pages by default. - DevTools popups are Chrome style only (cannot be windowless). - The Alloy extension API will not supported. Chrome runtime + Alloy style passes all expected Alloy ceftests except the following: - `DisplayTest.AutoResize` (Alloy extension API not supported) - `DownloadTest.*` (Download API not yet supported) - `ExtensionTest.*` (Alloy extension API not supported) This change also adds Chrome runtime support for CefContextMenuHandler::RunContextMenu (see #3293). This change also explicitly blocks (and doesn't retry) FrameAttached requests from PDF viewer and print preview excluded frames (see #3664). Known issues specific to Chrome runtime + Alloy style: - DevTools popup with windowless rendering doesn't load successfully. Use windowed rendering or remote debugging as a workaround. - Chrome style Window with Alloy style BrowserView (`--use-alloy-style --use-chrome-style-window`) does not show Chrome theme changes. To test: - Run `ceftests --enable-chrome-runtime --use-alloy-style [--use-chrome-style-window] [--use-views|--use-native] --gtest_filter=...` - Run `cefclient --enable-chrome-runtime --use-alloy-style [--use-chrome-style-window] [--use-views|--use-native|--off-screen-rendering-enabled]` - Run `cefsimple --enable-chrome-runtime --use-alloy-style [--use-views]`
2024-04-17 18:01:26 +02:00
bool print_preview_enabled,
CefRefPtr<CefDictionaryValue> extra_info);
CefBrowserInfo(const CefBrowserInfo&) = delete;
CefBrowserInfo& operator=(const CefBrowserInfo&) = delete;
int browser_id() const { return browser_id_; }
bool is_popup() const { return is_popup_; }
Implement off-screen rendering support using delegated rendering (issue #1257). This implementation supports both GPU compositing and software compositing (used when GPU is not supported or when passing `--disable-gpu --disable-gpu-compositing` command-line flags). GPU-accelerated features (WebGL and 3D CSS) that did not work with the previous off-screen rendering implementation do work with this implementation when GPU support is available. Rendering now operates on a per-frame basis. The frame rate is configurable via CefBrowserSettings.windowless_frame_rate up to a maximum of 60fps (potentially limited by how fast the system can generate new frames). CEF generates a bitmap from the compositor backing and passes it to CefRenderHandler::OnPaint. The previous CefRenderHandler/CefBrowserHost API for off-screen rendering has been restored mostly as-is with some minor changes: - CefBrowserHost::Invalidate no longer accepts a CefRect region argument. Instead of invalidating a specific region it now triggers generation of a new frame. - The |dirtyRects| argument to CefRenderHandler::OnPaint will now always be a single CefRect representing the whole view (frame) size. Previously, invalidated regions were listed separately. - Linux: CefBrowserHost::SendKeyEvent now expects X11 event information instead of GTK event information. See cefclient for an example of converting GTK events to the necessary format. - Sizes passed to the CefRenderHandler OnPaint and OnPopupSize methods are now already DPI scaled. Previously, the client had to perform DPI scaling. - Includes drag&drop implementation from issue #1032. - Includes unit test fixes from issue #1245. git-svn-id: https://chromiumembedded.googlecode.com/svn/trunk@1751 5089003a-bbd8-11dd-ad1f-f1f9622dbc98
2014-07-01 00:30:29 +02:00
bool is_windowless() const { return is_windowless_; }
chrome: Add support for Alloy style browsers and windows (see #3681) Split the Alloy runtime into bootstrap and style components. Support creation of Alloy style browsers and windows with the Chrome runtime. Chrome runtime (`--enable-chrome-runtime`) + Alloy style (`--use-alloy-style`) supports Views (`--use-views`), native parent (`--use-native`) and windowless rendering (`--off-screen-rendering-enabled`). Print preview is supported in all cases except with windowless rendering on all platforms and native parent on MacOS. It is disabled by default with Alloy style for legacy compatibility. Where supported it can be enabled or disabled globally using `--[enable|disable]-print-preview` or configured on a per-RequestContext basis using the `printing.print_preview_disabled` preference. It also behaves as expected when triggered via the PDF viewer print button. Chrome runtime + Alloy style behavior differs from Alloy runtime in the following significant ways: - Supports Chrome error pages by default. - DevTools popups are Chrome style only (cannot be windowless). - The Alloy extension API will not supported. Chrome runtime + Alloy style passes all expected Alloy ceftests except the following: - `DisplayTest.AutoResize` (Alloy extension API not supported) - `DownloadTest.*` (Download API not yet supported) - `ExtensionTest.*` (Alloy extension API not supported) This change also adds Chrome runtime support for CefContextMenuHandler::RunContextMenu (see #3293). This change also explicitly blocks (and doesn't retry) FrameAttached requests from PDF viewer and print preview excluded frames (see #3664). Known issues specific to Chrome runtime + Alloy style: - DevTools popup with windowless rendering doesn't load successfully. Use windowed rendering or remote debugging as a workaround. - Chrome style Window with Alloy style BrowserView (`--use-alloy-style --use-chrome-style-window`) does not show Chrome theme changes. To test: - Run `ceftests --enable-chrome-runtime --use-alloy-style [--use-chrome-style-window] [--use-views|--use-native] --gtest_filter=...` - Run `cefclient --enable-chrome-runtime --use-alloy-style [--use-chrome-style-window] [--use-views|--use-native|--off-screen-rendering-enabled]` - Run `cefsimple --enable-chrome-runtime --use-alloy-style [--use-views]`
2024-04-17 18:01:26 +02:00
bool print_preview_enabled() const { return print_preview_enabled_; }
CefRefPtr<CefDictionaryValue> extra_info() const { return extra_info_; }
Move message routing from CefBrowser to CefFrame (see issue #2498). This change moves the SendProcessMessage method from CefBrowser to CefFrame and adds CefBrowser parameters to OnProcessMessageReceived and OnDraggableRegionsChanged. The internal implementation has changed as follows: - Frame IDs are now a 64-bit combination of the 32-bit render_process_id and render_routing_id values that uniquely identify a RenderFrameHost (RFH). - CefFrameHostImpl objects are now managed by CefBrowserInfo with life span tied to RFH expectations. Specifically, a CefFrameHostImpl object representing a sub-frame will be created when a RenderFrame is created in the renderer process and detached when the associated RenderFrame is deleted or the renderer process in which it runs has died. - The CefFrameHostImpl object representing the main frame will always be valid but the underlying RFH (and associated frame ID) may change over time as a result of cross-origin navigations. Despite these changes calling LoadURL on the main frame object in the browser process will always navigate as expected. - Speculative RFHs, which may be created as a result of a cross-origin navigation and discarded if that navigation is not committed, are now handled correctly (e.g. ignored in most cases until they're committed). - It is less likely, but still possible, to receive a CefFrame object with an invalid frame ID (ID < 0). This can happen in cases where a RFH has not yet been created for a sub-frame. For example, when OnBeforeBrowse is called before initiating navigation in a previously nonexisting sub-frame. To test: All tests pass with NetworkService enabled and disabled.
2019-05-24 22:23:43 +02:00
// May return NULL if the browser has not yet been created or if the browser
// has been destroyed.
Create a ChromeBrowserHostImpl for every Chrome tab (see issue #2969) The Browser object represents the top-level Chrome browser window. One or more tabs (WebContents) are then owned by the Browser object via TabStripModel. A new Browser object can be created programmatically using "new Browser" or Browser::Create, or as a result of user action such as dragging a tab out of an existing window. New or existing tabs can also be added to an already existing Browser object. The Browser object acts as the WebContentsDelegate for all attached tabs. CEF integration requires WebContentsDelegate callbacks and notification of tab attach/detach. To support this integration we add a cef::BrowserDelegate (ChromeBrowserDelegate) member that is created in the Browser constructor and receives delegation for the Browser callbacks. ChromeBrowserDelegate creates a new ChromeBrowserHostImpl when a tab is added to a Browser for the first time, and that ChromeBrowserHostImpl continues to exist until the tab's WebContents is destroyed. The associated WebContents object does not change, but the Browser object will change when the tab is dragged between windows. CEF callback logic is shared between the chrome and alloy runtimes where possible. This shared logic has been extracted from CefBrowserHostImpl to create new CefBrowserHostBase and CefBrowserContentsDelegate classes. The CefBrowserHostImpl class is now only used with the alloy runtime and will be renamed to AlloyBrowserHostImpl in a future commit.
2020-09-18 00:24:08 +02:00
CefRefPtr<CefBrowserHostBase> browser() const;
Move message routing from CefBrowser to CefFrame (see issue #2498). This change moves the SendProcessMessage method from CefBrowser to CefFrame and adds CefBrowser parameters to OnProcessMessageReceived and OnDraggableRegionsChanged. The internal implementation has changed as follows: - Frame IDs are now a 64-bit combination of the 32-bit render_process_id and render_routing_id values that uniquely identify a RenderFrameHost (RFH). - CefFrameHostImpl objects are now managed by CefBrowserInfo with life span tied to RFH expectations. Specifically, a CefFrameHostImpl object representing a sub-frame will be created when a RenderFrame is created in the renderer process and detached when the associated RenderFrame is deleted or the renderer process in which it runs has died. - The CefFrameHostImpl object representing the main frame will always be valid but the underlying RFH (and associated frame ID) may change over time as a result of cross-origin navigations. Despite these changes calling LoadURL on the main frame object in the browser process will always navigate as expected. - Speculative RFHs, which may be created as a result of a cross-origin navigation and discarded if that navigation is not committed, are now handled correctly (e.g. ignored in most cases until they're committed). - It is less likely, but still possible, to receive a CefFrame object with an invalid frame ID (ID < 0). This can happen in cases where a RFH has not yet been created for a sub-frame. For example, when OnBeforeBrowse is called before initiating navigation in a previously nonexisting sub-frame. To test: All tests pass with NetworkService enabled and disabled.
2019-05-24 22:23:43 +02:00
Create a ChromeBrowserHostImpl for every Chrome tab (see issue #2969) The Browser object represents the top-level Chrome browser window. One or more tabs (WebContents) are then owned by the Browser object via TabStripModel. A new Browser object can be created programmatically using "new Browser" or Browser::Create, or as a result of user action such as dragging a tab out of an existing window. New or existing tabs can also be added to an already existing Browser object. The Browser object acts as the WebContentsDelegate for all attached tabs. CEF integration requires WebContentsDelegate callbacks and notification of tab attach/detach. To support this integration we add a cef::BrowserDelegate (ChromeBrowserDelegate) member that is created in the Browser constructor and receives delegation for the Browser callbacks. ChromeBrowserDelegate creates a new ChromeBrowserHostImpl when a tab is added to a Browser for the first time, and that ChromeBrowserHostImpl continues to exist until the tab's WebContents is destroyed. The associated WebContents object does not change, but the Browser object will change when the tab is dragged between windows. CEF callback logic is shared between the chrome and alloy runtimes where possible. This shared logic has been extracted from CefBrowserHostImpl to create new CefBrowserHostBase and CefBrowserContentsDelegate classes. The CefBrowserHostImpl class is now only used with the alloy runtime and will be renamed to AlloyBrowserHostImpl in a future commit.
2020-09-18 00:24:08 +02:00
// Set or clear the browser. Called from CefBrowserHostBase InitializeBrowser
Move message routing from CefBrowser to CefFrame (see issue #2498). This change moves the SendProcessMessage method from CefBrowser to CefFrame and adds CefBrowser parameters to OnProcessMessageReceived and OnDraggableRegionsChanged. The internal implementation has changed as follows: - Frame IDs are now a 64-bit combination of the 32-bit render_process_id and render_routing_id values that uniquely identify a RenderFrameHost (RFH). - CefFrameHostImpl objects are now managed by CefBrowserInfo with life span tied to RFH expectations. Specifically, a CefFrameHostImpl object representing a sub-frame will be created when a RenderFrame is created in the renderer process and detached when the associated RenderFrame is deleted or the renderer process in which it runs has died. - The CefFrameHostImpl object representing the main frame will always be valid but the underlying RFH (and associated frame ID) may change over time as a result of cross-origin navigations. Despite these changes calling LoadURL on the main frame object in the browser process will always navigate as expected. - Speculative RFHs, which may be created as a result of a cross-origin navigation and discarded if that navigation is not committed, are now handled correctly (e.g. ignored in most cases until they're committed). - It is less likely, but still possible, to receive a CefFrame object with an invalid frame ID (ID < 0). This can happen in cases where a RFH has not yet been created for a sub-frame. For example, when OnBeforeBrowse is called before initiating navigation in a previously nonexisting sub-frame. To test: All tests pass with NetworkService enabled and disabled.
2019-05-24 22:23:43 +02:00
// (to set) and DestroyBrowser (to clear).
Create a ChromeBrowserHostImpl for every Chrome tab (see issue #2969) The Browser object represents the top-level Chrome browser window. One or more tabs (WebContents) are then owned by the Browser object via TabStripModel. A new Browser object can be created programmatically using "new Browser" or Browser::Create, or as a result of user action such as dragging a tab out of an existing window. New or existing tabs can also be added to an already existing Browser object. The Browser object acts as the WebContentsDelegate for all attached tabs. CEF integration requires WebContentsDelegate callbacks and notification of tab attach/detach. To support this integration we add a cef::BrowserDelegate (ChromeBrowserDelegate) member that is created in the Browser constructor and receives delegation for the Browser callbacks. ChromeBrowserDelegate creates a new ChromeBrowserHostImpl when a tab is added to a Browser for the first time, and that ChromeBrowserHostImpl continues to exist until the tab's WebContents is destroyed. The associated WebContents object does not change, but the Browser object will change when the tab is dragged between windows. CEF callback logic is shared between the chrome and alloy runtimes where possible. This shared logic has been extracted from CefBrowserHostImpl to create new CefBrowserHostBase and CefBrowserContentsDelegate classes. The CefBrowserHostImpl class is now only used with the alloy runtime and will be renamed to AlloyBrowserHostImpl in a future commit.
2020-09-18 00:24:08 +02:00
void SetBrowser(CefRefPtr<CefBrowserHostBase> browser);
Move message routing from CefBrowser to CefFrame (see issue #2498). This change moves the SendProcessMessage method from CefBrowser to CefFrame and adds CefBrowser parameters to OnProcessMessageReceived and OnDraggableRegionsChanged. The internal implementation has changed as follows: - Frame IDs are now a 64-bit combination of the 32-bit render_process_id and render_routing_id values that uniquely identify a RenderFrameHost (RFH). - CefFrameHostImpl objects are now managed by CefBrowserInfo with life span tied to RFH expectations. Specifically, a CefFrameHostImpl object representing a sub-frame will be created when a RenderFrame is created in the renderer process and detached when the associated RenderFrame is deleted or the renderer process in which it runs has died. - The CefFrameHostImpl object representing the main frame will always be valid but the underlying RFH (and associated frame ID) may change over time as a result of cross-origin navigations. Despite these changes calling LoadURL on the main frame object in the browser process will always navigate as expected. - Speculative RFHs, which may be created as a result of a cross-origin navigation and discarded if that navigation is not committed, are now handled correctly (e.g. ignored in most cases until they're committed). - It is less likely, but still possible, to receive a CefFrame object with an invalid frame ID (ID < 0). This can happen in cases where a RFH has not yet been created for a sub-frame. For example, when OnBeforeBrowse is called before initiating navigation in a previously nonexisting sub-frame. To test: All tests pass with NetworkService enabled and disabled.
2019-05-24 22:23:43 +02:00
// Called after OnBeforeClose and before SetBrowser(nullptr). This will cause
// browser() and GetMainFrame() to return nullptr as expected by
// CefFrameHandler callbacks. Note that this differs from calling
// SetBrowser(nullptr) because the WebContents has not yet been destroyed and
// further frame-related callbacks are expected.
void SetClosing();
Move message routing from CefBrowser to CefFrame (see issue #2498). This change moves the SendProcessMessage method from CefBrowser to CefFrame and adds CefBrowser parameters to OnProcessMessageReceived and OnDraggableRegionsChanged. The internal implementation has changed as follows: - Frame IDs are now a 64-bit combination of the 32-bit render_process_id and render_routing_id values that uniquely identify a RenderFrameHost (RFH). - CefFrameHostImpl objects are now managed by CefBrowserInfo with life span tied to RFH expectations. Specifically, a CefFrameHostImpl object representing a sub-frame will be created when a RenderFrame is created in the renderer process and detached when the associated RenderFrame is deleted or the renderer process in which it runs has died. - The CefFrameHostImpl object representing the main frame will always be valid but the underlying RFH (and associated frame ID) may change over time as a result of cross-origin navigations. Despite these changes calling LoadURL on the main frame object in the browser process will always navigate as expected. - Speculative RFHs, which may be created as a result of a cross-origin navigation and discarded if that navigation is not committed, are now handled correctly (e.g. ignored in most cases until they're committed). - It is less likely, but still possible, to receive a CefFrame object with an invalid frame ID (ID < 0). This can happen in cases where a RFH has not yet been created for a sub-frame. For example, when OnBeforeBrowse is called before initiating navigation in a previously nonexisting sub-frame. To test: All tests pass with NetworkService enabled and disabled.
2019-05-24 22:23:43 +02:00
// Ensure that a frame record exists for |host|. Called for the main frame
// when the RenderView is created, or for a sub-frame when the associated
// RenderFrame is created in the renderer process.
// Called from CefBrowserContentsDelegate::RenderFrameCreated.
void MaybeCreateFrame(content::RenderFrameHost* host);
Move message routing from CefBrowser to CefFrame (see issue #2498). This change moves the SendProcessMessage method from CefBrowser to CefFrame and adds CefBrowser parameters to OnProcessMessageReceived and OnDraggableRegionsChanged. The internal implementation has changed as follows: - Frame IDs are now a 64-bit combination of the 32-bit render_process_id and render_routing_id values that uniquely identify a RenderFrameHost (RFH). - CefFrameHostImpl objects are now managed by CefBrowserInfo with life span tied to RFH expectations. Specifically, a CefFrameHostImpl object representing a sub-frame will be created when a RenderFrame is created in the renderer process and detached when the associated RenderFrame is deleted or the renderer process in which it runs has died. - The CefFrameHostImpl object representing the main frame will always be valid but the underlying RFH (and associated frame ID) may change over time as a result of cross-origin navigations. Despite these changes calling LoadURL on the main frame object in the browser process will always navigate as expected. - Speculative RFHs, which may be created as a result of a cross-origin navigation and discarded if that navigation is not committed, are now handled correctly (e.g. ignored in most cases until they're committed). - It is less likely, but still possible, to receive a CefFrame object with an invalid frame ID (ID < 0). This can happen in cases where a RFH has not yet been created for a sub-frame. For example, when OnBeforeBrowse is called before initiating navigation in a previously nonexisting sub-frame. To test: All tests pass with NetworkService enabled and disabled.
2019-05-24 22:23:43 +02:00
// Used to track state changes such as entering/exiting the BackForwardCache.
// Called from CefBrowserContentsDelegate::RenderFrameHostStateChanged.
void FrameHostStateChanged(
content::RenderFrameHost* host,
content::RenderFrameHost::LifecycleState old_state,
content::RenderFrameHost::LifecycleState new_state);
Move message routing from CefBrowser to CefFrame (see issue #2498). This change moves the SendProcessMessage method from CefBrowser to CefFrame and adds CefBrowser parameters to OnProcessMessageReceived and OnDraggableRegionsChanged. The internal implementation has changed as follows: - Frame IDs are now a 64-bit combination of the 32-bit render_process_id and render_routing_id values that uniquely identify a RenderFrameHost (RFH). - CefFrameHostImpl objects are now managed by CefBrowserInfo with life span tied to RFH expectations. Specifically, a CefFrameHostImpl object representing a sub-frame will be created when a RenderFrame is created in the renderer process and detached when the associated RenderFrame is deleted or the renderer process in which it runs has died. - The CefFrameHostImpl object representing the main frame will always be valid but the underlying RFH (and associated frame ID) may change over time as a result of cross-origin navigations. Despite these changes calling LoadURL on the main frame object in the browser process will always navigate as expected. - Speculative RFHs, which may be created as a result of a cross-origin navigation and discarded if that navigation is not committed, are now handled correctly (e.g. ignored in most cases until they're committed). - It is less likely, but still possible, to receive a CefFrame object with an invalid frame ID (ID < 0). This can happen in cases where a RFH has not yet been created for a sub-frame. For example, when OnBeforeBrowse is called before initiating navigation in a previously nonexisting sub-frame. To test: All tests pass with NetworkService enabled and disabled.
2019-05-24 22:23:43 +02:00
// Remove the frame record for |host|. Called for the main frame when the
// RenderView is destroyed, or for a sub-frame when the associated RenderFrame
// is destroyed in the renderer process.
Create a ChromeBrowserHostImpl for every Chrome tab (see issue #2969) The Browser object represents the top-level Chrome browser window. One or more tabs (WebContents) are then owned by the Browser object via TabStripModel. A new Browser object can be created programmatically using "new Browser" or Browser::Create, or as a result of user action such as dragging a tab out of an existing window. New or existing tabs can also be added to an already existing Browser object. The Browser object acts as the WebContentsDelegate for all attached tabs. CEF integration requires WebContentsDelegate callbacks and notification of tab attach/detach. To support this integration we add a cef::BrowserDelegate (ChromeBrowserDelegate) member that is created in the Browser constructor and receives delegation for the Browser callbacks. ChromeBrowserDelegate creates a new ChromeBrowserHostImpl when a tab is added to a Browser for the first time, and that ChromeBrowserHostImpl continues to exist until the tab's WebContents is destroyed. The associated WebContents object does not change, but the Browser object will change when the tab is dragged between windows. CEF callback logic is shared between the chrome and alloy runtimes where possible. This shared logic has been extracted from CefBrowserHostImpl to create new CefBrowserHostBase and CefBrowserContentsDelegate classes. The CefBrowserHostImpl class is now only used with the alloy runtime and will be renamed to AlloyBrowserHostImpl in a future commit.
2020-09-18 00:24:08 +02:00
// Called from CefBrowserContentsDelegate::RenderFrameDeleted or
Move message routing from CefBrowser to CefFrame (see issue #2498). This change moves the SendProcessMessage method from CefBrowser to CefFrame and adds CefBrowser parameters to OnProcessMessageReceived and OnDraggableRegionsChanged. The internal implementation has changed as follows: - Frame IDs are now a 64-bit combination of the 32-bit render_process_id and render_routing_id values that uniquely identify a RenderFrameHost (RFH). - CefFrameHostImpl objects are now managed by CefBrowserInfo with life span tied to RFH expectations. Specifically, a CefFrameHostImpl object representing a sub-frame will be created when a RenderFrame is created in the renderer process and detached when the associated RenderFrame is deleted or the renderer process in which it runs has died. - The CefFrameHostImpl object representing the main frame will always be valid but the underlying RFH (and associated frame ID) may change over time as a result of cross-origin navigations. Despite these changes calling LoadURL on the main frame object in the browser process will always navigate as expected. - Speculative RFHs, which may be created as a result of a cross-origin navigation and discarded if that navigation is not committed, are now handled correctly (e.g. ignored in most cases until they're committed). - It is less likely, but still possible, to receive a CefFrame object with an invalid frame ID (ID < 0). This can happen in cases where a RFH has not yet been created for a sub-frame. For example, when OnBeforeBrowse is called before initiating navigation in a previously nonexisting sub-frame. To test: All tests pass with NetworkService enabled and disabled.
2019-05-24 22:23:43 +02:00
// CefMimeHandlerViewGuestDelegate::OnGuestDetached.
void RemoveFrame(content::RenderFrameHost* host);
// Returns the main frame object. This object will remain valid until the
// browser is destroyed even though the indentifier may change with cross-
// origin navigations. Furthermore, calling LoadURL on this object will always
// behave as expected because the call is routed through the browser's
// NavigationController.
CefRefPtr<CefFrameHostImpl> GetMainFrame();
// Creates a temporary sub-frame object for situations during navigation or
// resource loading where a RFH does not yet exist. If |parent_frame_id|
// is invalid the current main frame will be specified as the parent.
// Temporary frame objects are not tracked but will be implicitly detached
// on browser destruction.
CefRefPtr<CefFrameHostImpl> CreateTempSubFrame(
const content::GlobalRenderFrameHostId& parent_global_id);
Move message routing from CefBrowser to CefFrame (see issue #2498). This change moves the SendProcessMessage method from CefBrowser to CefFrame and adds CefBrowser parameters to OnProcessMessageReceived and OnDraggableRegionsChanged. The internal implementation has changed as follows: - Frame IDs are now a 64-bit combination of the 32-bit render_process_id and render_routing_id values that uniquely identify a RenderFrameHost (RFH). - CefFrameHostImpl objects are now managed by CefBrowserInfo with life span tied to RFH expectations. Specifically, a CefFrameHostImpl object representing a sub-frame will be created when a RenderFrame is created in the renderer process and detached when the associated RenderFrame is deleted or the renderer process in which it runs has died. - The CefFrameHostImpl object representing the main frame will always be valid but the underlying RFH (and associated frame ID) may change over time as a result of cross-origin navigations. Despite these changes calling LoadURL on the main frame object in the browser process will always navigate as expected. - Speculative RFHs, which may be created as a result of a cross-origin navigation and discarded if that navigation is not committed, are now handled correctly (e.g. ignored in most cases until they're committed). - It is less likely, but still possible, to receive a CefFrame object with an invalid frame ID (ID < 0). This can happen in cases where a RFH has not yet been created for a sub-frame. For example, when OnBeforeBrowse is called before initiating navigation in a previously nonexisting sub-frame. To test: All tests pass with NetworkService enabled and disabled.
2019-05-24 22:23:43 +02:00
// Returns the frame object matching the specified host or nullptr if no match
// is found. Must be called on the UI thread.
Move message routing from CefBrowser to CefFrame (see issue #2498). This change moves the SendProcessMessage method from CefBrowser to CefFrame and adds CefBrowser parameters to OnProcessMessageReceived and OnDraggableRegionsChanged. The internal implementation has changed as follows: - Frame IDs are now a 64-bit combination of the 32-bit render_process_id and render_routing_id values that uniquely identify a RenderFrameHost (RFH). - CefFrameHostImpl objects are now managed by CefBrowserInfo with life span tied to RFH expectations. Specifically, a CefFrameHostImpl object representing a sub-frame will be created when a RenderFrame is created in the renderer process and detached when the associated RenderFrame is deleted or the renderer process in which it runs has died. - The CefFrameHostImpl object representing the main frame will always be valid but the underlying RFH (and associated frame ID) may change over time as a result of cross-origin navigations. Despite these changes calling LoadURL on the main frame object in the browser process will always navigate as expected. - Speculative RFHs, which may be created as a result of a cross-origin navigation and discarded if that navigation is not committed, are now handled correctly (e.g. ignored in most cases until they're committed). - It is less likely, but still possible, to receive a CefFrame object with an invalid frame ID (ID < 0). This can happen in cases where a RFH has not yet been created for a sub-frame. For example, when OnBeforeBrowse is called before initiating navigation in a previously nonexisting sub-frame. To test: All tests pass with NetworkService enabled and disabled.
2019-05-24 22:23:43 +02:00
CefRefPtr<CefFrameHostImpl> GetFrameForHost(
const content::RenderFrameHost* host,
bool prefer_speculative = false) const;
Move message routing from CefBrowser to CefFrame (see issue #2498). This change moves the SendProcessMessage method from CefBrowser to CefFrame and adds CefBrowser parameters to OnProcessMessageReceived and OnDraggableRegionsChanged. The internal implementation has changed as follows: - Frame IDs are now a 64-bit combination of the 32-bit render_process_id and render_routing_id values that uniquely identify a RenderFrameHost (RFH). - CefFrameHostImpl objects are now managed by CefBrowserInfo with life span tied to RFH expectations. Specifically, a CefFrameHostImpl object representing a sub-frame will be created when a RenderFrame is created in the renderer process and detached when the associated RenderFrame is deleted or the renderer process in which it runs has died. - The CefFrameHostImpl object representing the main frame will always be valid but the underlying RFH (and associated frame ID) may change over time as a result of cross-origin navigations. Despite these changes calling LoadURL on the main frame object in the browser process will always navigate as expected. - Speculative RFHs, which may be created as a result of a cross-origin navigation and discarded if that navigation is not committed, are now handled correctly (e.g. ignored in most cases until they're committed). - It is less likely, but still possible, to receive a CefFrame object with an invalid frame ID (ID < 0). This can happen in cases where a RFH has not yet been created for a sub-frame. For example, when OnBeforeBrowse is called before initiating navigation in a previously nonexisting sub-frame. To test: All tests pass with NetworkService enabled and disabled.
2019-05-24 22:23:43 +02:00
// Returns the frame object matching the specified ID/token or nullptr if no
// match is found. Safe to call from any thread.
CefRefPtr<CefFrameHostImpl> GetFrameForGlobalId(
const content::GlobalRenderFrameHostId& global_id,
bool prefer_speculative = false) const;
CefRefPtr<CefFrameHostImpl> GetFrameForGlobalToken(
const content::GlobalRenderFrameHostToken& global_token,
bool prefer_speculative = false) const;
Move message routing from CefBrowser to CefFrame (see issue #2498). This change moves the SendProcessMessage method from CefBrowser to CefFrame and adds CefBrowser parameters to OnProcessMessageReceived and OnDraggableRegionsChanged. The internal implementation has changed as follows: - Frame IDs are now a 64-bit combination of the 32-bit render_process_id and render_routing_id values that uniquely identify a RenderFrameHost (RFH). - CefFrameHostImpl objects are now managed by CefBrowserInfo with life span tied to RFH expectations. Specifically, a CefFrameHostImpl object representing a sub-frame will be created when a RenderFrame is created in the renderer process and detached when the associated RenderFrame is deleted or the renderer process in which it runs has died. - The CefFrameHostImpl object representing the main frame will always be valid but the underlying RFH (and associated frame ID) may change over time as a result of cross-origin navigations. Despite these changes calling LoadURL on the main frame object in the browser process will always navigate as expected. - Speculative RFHs, which may be created as a result of a cross-origin navigation and discarded if that navigation is not committed, are now handled correctly (e.g. ignored in most cases until they're committed). - It is less likely, but still possible, to receive a CefFrame object with an invalid frame ID (ID < 0). This can happen in cases where a RFH has not yet been created for a sub-frame. For example, when OnBeforeBrowse is called before initiating navigation in a previously nonexisting sub-frame. To test: All tests pass with NetworkService enabled and disabled.
2019-05-24 22:23:43 +02:00
// Returns all non-speculative frame objects that currently exist. Safe to
// call from any thread.
using FrameHostList = std::set<CefRefPtr<CefFrameHostImpl>>;
Move message routing from CefBrowser to CefFrame (see issue #2498). This change moves the SendProcessMessage method from CefBrowser to CefFrame and adds CefBrowser parameters to OnProcessMessageReceived and OnDraggableRegionsChanged. The internal implementation has changed as follows: - Frame IDs are now a 64-bit combination of the 32-bit render_process_id and render_routing_id values that uniquely identify a RenderFrameHost (RFH). - CefFrameHostImpl objects are now managed by CefBrowserInfo with life span tied to RFH expectations. Specifically, a CefFrameHostImpl object representing a sub-frame will be created when a RenderFrame is created in the renderer process and detached when the associated RenderFrame is deleted or the renderer process in which it runs has died. - The CefFrameHostImpl object representing the main frame will always be valid but the underlying RFH (and associated frame ID) may change over time as a result of cross-origin navigations. Despite these changes calling LoadURL on the main frame object in the browser process will always navigate as expected. - Speculative RFHs, which may be created as a result of a cross-origin navigation and discarded if that navigation is not committed, are now handled correctly (e.g. ignored in most cases until they're committed). - It is less likely, but still possible, to receive a CefFrame object with an invalid frame ID (ID < 0). This can happen in cases where a RFH has not yet been created for a sub-frame. For example, when OnBeforeBrowse is called before initiating navigation in a previously nonexisting sub-frame. To test: All tests pass with NetworkService enabled and disabled.
2019-05-24 22:23:43 +02:00
FrameHostList GetAllFrames() const;
Create a ChromeBrowserHostImpl for every Chrome tab (see issue #2969) The Browser object represents the top-level Chrome browser window. One or more tabs (WebContents) are then owned by the Browser object via TabStripModel. A new Browser object can be created programmatically using "new Browser" or Browser::Create, or as a result of user action such as dragging a tab out of an existing window. New or existing tabs can also be added to an already existing Browser object. The Browser object acts as the WebContentsDelegate for all attached tabs. CEF integration requires WebContentsDelegate callbacks and notification of tab attach/detach. To support this integration we add a cef::BrowserDelegate (ChromeBrowserDelegate) member that is created in the Browser constructor and receives delegation for the Browser callbacks. ChromeBrowserDelegate creates a new ChromeBrowserHostImpl when a tab is added to a Browser for the first time, and that ChromeBrowserHostImpl continues to exist until the tab's WebContents is destroyed. The associated WebContents object does not change, but the Browser object will change when the tab is dragged between windows. CEF callback logic is shared between the chrome and alloy runtimes where possible. This shared logic has been extracted from CefBrowserHostImpl to create new CefBrowserHostBase and CefBrowserContentsDelegate classes. The CefBrowserHostImpl class is now only used with the alloy runtime and will be renamed to AlloyBrowserHostImpl in a future commit.
2020-09-18 00:24:08 +02:00
class NavigationLock final : public base::RefCounted<NavigationLock> {
private:
friend class CefBrowserInfo;
friend class base::RefCounted<NavigationLock>;
2024-01-21 20:18:09 +01:00
// All usage is via friend declaration. NOLINTNEXTLINE
Create a ChromeBrowserHostImpl for every Chrome tab (see issue #2969) The Browser object represents the top-level Chrome browser window. One or more tabs (WebContents) are then owned by the Browser object via TabStripModel. A new Browser object can be created programmatically using "new Browser" or Browser::Create, or as a result of user action such as dragging a tab out of an existing window. New or existing tabs can also be added to an already existing Browser object. The Browser object acts as the WebContentsDelegate for all attached tabs. CEF integration requires WebContentsDelegate callbacks and notification of tab attach/detach. To support this integration we add a cef::BrowserDelegate (ChromeBrowserDelegate) member that is created in the Browser constructor and receives delegation for the Browser callbacks. ChromeBrowserDelegate creates a new ChromeBrowserHostImpl when a tab is added to a Browser for the first time, and that ChromeBrowserHostImpl continues to exist until the tab's WebContents is destroyed. The associated WebContents object does not change, but the Browser object will change when the tab is dragged between windows. CEF callback logic is shared between the chrome and alloy runtimes where possible. This shared logic has been extracted from CefBrowserHostImpl to create new CefBrowserHostBase and CefBrowserContentsDelegate classes. The CefBrowserHostImpl class is now only used with the alloy runtime and will be renamed to AlloyBrowserHostImpl in a future commit.
2020-09-18 00:24:08 +02:00
NavigationLock();
2024-01-21 20:18:09 +01:00
// All usage is via friend declaration. NOLINTNEXTLINE
Create a ChromeBrowserHostImpl for every Chrome tab (see issue #2969) The Browser object represents the top-level Chrome browser window. One or more tabs (WebContents) are then owned by the Browser object via TabStripModel. A new Browser object can be created programmatically using "new Browser" or Browser::Create, or as a result of user action such as dragging a tab out of an existing window. New or existing tabs can also be added to an already existing Browser object. The Browser object acts as the WebContentsDelegate for all attached tabs. CEF integration requires WebContentsDelegate callbacks and notification of tab attach/detach. To support this integration we add a cef::BrowserDelegate (ChromeBrowserDelegate) member that is created in the Browser constructor and receives delegation for the Browser callbacks. ChromeBrowserDelegate creates a new ChromeBrowserHostImpl when a tab is added to a Browser for the first time, and that ChromeBrowserHostImpl continues to exist until the tab's WebContents is destroyed. The associated WebContents object does not change, but the Browser object will change when the tab is dragged between windows. CEF callback logic is shared between the chrome and alloy runtimes where possible. This shared logic has been extracted from CefBrowserHostImpl to create new CefBrowserHostBase and CefBrowserContentsDelegate classes. The CefBrowserHostImpl class is now only used with the alloy runtime and will be renamed to AlloyBrowserHostImpl in a future commit.
2020-09-18 00:24:08 +02:00
~NavigationLock();
base::OnceClosure pending_action_;
base::WeakPtrFactory<NavigationLock> weak_ptr_factory_;
};
// Block navigation actions on NavigationLock life span. Must be called on the
// UI thread.
scoped_refptr<NavigationLock> CreateNavigationLock();
// Returns true if navigation actions are currently blocked. If this method
// returns true the most recent |pending_action| will be executed on the UI
// thread once the navigation lock is released. Must be called on the UI
// thread.
bool IsNavigationLocked(base::OnceClosure pending_action);
using FrameNotifyOnceAction =
base::OnceCallback<void(CefRefPtr<CefFrameHandler>)>;
// Specifies a CefFrameHandler notification action whose execution may need
// to be blocked on release of a potentially held NotificationStateLock. If no
// CefFrameHandler exists then the action will be discarded without executing.
// If the NotificationStateLock is not currently held then the action will be
// executed immediately.
void MaybeExecuteFrameNotification(FrameNotifyOnceAction pending_action);
Fix draggable region update with BackForwardCache enabled (see issue #2421) When BackForwardCache is enabled and the user navigates the main frame back/forward a new RFH may be created for an existing main frame GlobalId value and CefFrameHostImpl (e.g. an object that was previously Detach()ed after main frame navigation called SetMainFrame, but for which RenderFrameDeleted was not subsequently called due to insertion in the BackForwardCache). In this case we can re-attach the new RFH to the existing main frame CefFrameHostImpl in RenderFrameHostStateChanged and resume processing of messages. Swapping back/forward to an existing (already loaded) renderer does not trigger new notifications for draggable regions (e.g. RenderFrameObserver:: DraggableRegionsChanged is not called by default). We therefore explicitly request an update of draggable regions by sending the DidStopLoading message to the renderer. A new |reattached| parameter is added to CefFrameHandler::OnFrameAttached to support identification of BackForwardCache usage by the client. To test with unit tests: Run `ceftests --gtest_filter=DraggableRegionsTest.DraggableRegionsCrossOrigin --enable-features=BackForwardCache` To test manually: 1. Run `cefclient --enable-features=BackForwardCache --use-views --url=http://tests/draggable`, note that draggable regions work. 2. Load https://www.google.com via the address bar, note that draggable regions are removed. 3. Go back to http://tests/draggable, note that draggable regions work. 4. Go forward to https://www.google.com, note that draggable regions are removed.
2021-09-15 13:40:08 +02:00
void MaybeNotifyDraggableRegionsChanged(
CefRefPtr<CefBrowserHostBase> browser,
CefRefPtr<CefFrameHostImpl> frame,
std::vector<CefDraggableRegion> draggable_regions);
Move message routing from CefBrowser to CefFrame (see issue #2498). This change moves the SendProcessMessage method from CefBrowser to CefFrame and adds CefBrowser parameters to OnProcessMessageReceived and OnDraggableRegionsChanged. The internal implementation has changed as follows: - Frame IDs are now a 64-bit combination of the 32-bit render_process_id and render_routing_id values that uniquely identify a RenderFrameHost (RFH). - CefFrameHostImpl objects are now managed by CefBrowserInfo with life span tied to RFH expectations. Specifically, a CefFrameHostImpl object representing a sub-frame will be created when a RenderFrame is created in the renderer process and detached when the associated RenderFrame is deleted or the renderer process in which it runs has died. - The CefFrameHostImpl object representing the main frame will always be valid but the underlying RFH (and associated frame ID) may change over time as a result of cross-origin navigations. Despite these changes calling LoadURL on the main frame object in the browser process will always navigate as expected. - Speculative RFHs, which may be created as a result of a cross-origin navigation and discarded if that navigation is not committed, are now handled correctly (e.g. ignored in most cases until they're committed). - It is less likely, but still possible, to receive a CefFrame object with an invalid frame ID (ID < 0). This can happen in cases where a RFH has not yet been created for a sub-frame. For example, when OnBeforeBrowse is called before initiating navigation in a previously nonexisting sub-frame. To test: All tests pass with NetworkService enabled and disabled.
2019-05-24 22:23:43 +02:00
private:
friend class base::RefCountedThreadSafe<CefBrowserInfo>;
Move message routing from CefBrowser to CefFrame (see issue #2498). This change moves the SendProcessMessage method from CefBrowser to CefFrame and adds CefBrowser parameters to OnProcessMessageReceived and OnDraggableRegionsChanged. The internal implementation has changed as follows: - Frame IDs are now a 64-bit combination of the 32-bit render_process_id and render_routing_id values that uniquely identify a RenderFrameHost (RFH). - CefFrameHostImpl objects are now managed by CefBrowserInfo with life span tied to RFH expectations. Specifically, a CefFrameHostImpl object representing a sub-frame will be created when a RenderFrame is created in the renderer process and detached when the associated RenderFrame is deleted or the renderer process in which it runs has died. - The CefFrameHostImpl object representing the main frame will always be valid but the underlying RFH (and associated frame ID) may change over time as a result of cross-origin navigations. Despite these changes calling LoadURL on the main frame object in the browser process will always navigate as expected. - Speculative RFHs, which may be created as a result of a cross-origin navigation and discarded if that navigation is not committed, are now handled correctly (e.g. ignored in most cases until they're committed). - It is less likely, but still possible, to receive a CefFrame object with an invalid frame ID (ID < 0). This can happen in cases where a RFH has not yet been created for a sub-frame. For example, when OnBeforeBrowse is called before initiating navigation in a previously nonexisting sub-frame. To test: All tests pass with NetworkService enabled and disabled.
2019-05-24 22:23:43 +02:00
virtual ~CefBrowserInfo();
Move message routing from CefBrowser to CefFrame (see issue #2498). This change moves the SendProcessMessage method from CefBrowser to CefFrame and adds CefBrowser parameters to OnProcessMessageReceived and OnDraggableRegionsChanged. The internal implementation has changed as follows: - Frame IDs are now a 64-bit combination of the 32-bit render_process_id and render_routing_id values that uniquely identify a RenderFrameHost (RFH). - CefFrameHostImpl objects are now managed by CefBrowserInfo with life span tied to RFH expectations. Specifically, a CefFrameHostImpl object representing a sub-frame will be created when a RenderFrame is created in the renderer process and detached when the associated RenderFrame is deleted or the renderer process in which it runs has died. - The CefFrameHostImpl object representing the main frame will always be valid but the underlying RFH (and associated frame ID) may change over time as a result of cross-origin navigations. Despite these changes calling LoadURL on the main frame object in the browser process will always navigate as expected. - Speculative RFHs, which may be created as a result of a cross-origin navigation and discarded if that navigation is not committed, are now handled correctly (e.g. ignored in most cases until they're committed). - It is less likely, but still possible, to receive a CefFrame object with an invalid frame ID (ID < 0). This can happen in cases where a RFH has not yet been created for a sub-frame. For example, when OnBeforeBrowse is called before initiating navigation in a previously nonexisting sub-frame. To test: All tests pass with NetworkService enabled and disabled.
2019-05-24 22:23:43 +02:00
struct FrameInfo {
~FrameInfo();
inline bool IsCurrentMainFrame() const {
return frame_ && is_main_frame_ && !is_speculative_ && !is_in_bfcache_;
}
Move message routing from CefBrowser to CefFrame (see issue #2498). This change moves the SendProcessMessage method from CefBrowser to CefFrame and adds CefBrowser parameters to OnProcessMessageReceived and OnDraggableRegionsChanged. The internal implementation has changed as follows: - Frame IDs are now a 64-bit combination of the 32-bit render_process_id and render_routing_id values that uniquely identify a RenderFrameHost (RFH). - CefFrameHostImpl objects are now managed by CefBrowserInfo with life span tied to RFH expectations. Specifically, a CefFrameHostImpl object representing a sub-frame will be created when a RenderFrame is created in the renderer process and detached when the associated RenderFrame is deleted or the renderer process in which it runs has died. - The CefFrameHostImpl object representing the main frame will always be valid but the underlying RFH (and associated frame ID) may change over time as a result of cross-origin navigations. Despite these changes calling LoadURL on the main frame object in the browser process will always navigate as expected. - Speculative RFHs, which may be created as a result of a cross-origin navigation and discarded if that navigation is not committed, are now handled correctly (e.g. ignored in most cases until they're committed). - It is less likely, but still possible, to receive a CefFrame object with an invalid frame ID (ID < 0). This can happen in cases where a RFH has not yet been created for a sub-frame. For example, when OnBeforeBrowse is called before initiating navigation in a previously nonexisting sub-frame. To test: All tests pass with NetworkService enabled and disabled.
2019-05-24 22:23:43 +02:00
content::RenderFrameHost* host_;
content::GlobalRenderFrameHostId global_id_;
Move message routing from CefBrowser to CefFrame (see issue #2498). This change moves the SendProcessMessage method from CefBrowser to CefFrame and adds CefBrowser parameters to OnProcessMessageReceived and OnDraggableRegionsChanged. The internal implementation has changed as follows: - Frame IDs are now a 64-bit combination of the 32-bit render_process_id and render_routing_id values that uniquely identify a RenderFrameHost (RFH). - CefFrameHostImpl objects are now managed by CefBrowserInfo with life span tied to RFH expectations. Specifically, a CefFrameHostImpl object representing a sub-frame will be created when a RenderFrame is created in the renderer process and detached when the associated RenderFrame is deleted or the renderer process in which it runs has died. - The CefFrameHostImpl object representing the main frame will always be valid but the underlying RFH (and associated frame ID) may change over time as a result of cross-origin navigations. Despite these changes calling LoadURL on the main frame object in the browser process will always navigate as expected. - Speculative RFHs, which may be created as a result of a cross-origin navigation and discarded if that navigation is not committed, are now handled correctly (e.g. ignored in most cases until they're committed). - It is less likely, but still possible, to receive a CefFrame object with an invalid frame ID (ID < 0). This can happen in cases where a RFH has not yet been created for a sub-frame. For example, when OnBeforeBrowse is called before initiating navigation in a previously nonexisting sub-frame. To test: All tests pass with NetworkService enabled and disabled.
2019-05-24 22:23:43 +02:00
bool is_main_frame_;
bool is_speculative_;
bool is_in_bfcache_ = false;
Move message routing from CefBrowser to CefFrame (see issue #2498). This change moves the SendProcessMessage method from CefBrowser to CefFrame and adds CefBrowser parameters to OnProcessMessageReceived and OnDraggableRegionsChanged. The internal implementation has changed as follows: - Frame IDs are now a 64-bit combination of the 32-bit render_process_id and render_routing_id values that uniquely identify a RenderFrameHost (RFH). - CefFrameHostImpl objects are now managed by CefBrowserInfo with life span tied to RFH expectations. Specifically, a CefFrameHostImpl object representing a sub-frame will be created when a RenderFrame is created in the renderer process and detached when the associated RenderFrame is deleted or the renderer process in which it runs has died. - The CefFrameHostImpl object representing the main frame will always be valid but the underlying RFH (and associated frame ID) may change over time as a result of cross-origin navigations. Despite these changes calling LoadURL on the main frame object in the browser process will always navigate as expected. - Speculative RFHs, which may be created as a result of a cross-origin navigation and discarded if that navigation is not committed, are now handled correctly (e.g. ignored in most cases until they're committed). - It is less likely, but still possible, to receive a CefFrame object with an invalid frame ID (ID < 0). This can happen in cases where a RFH has not yet been created for a sub-frame. For example, when OnBeforeBrowse is called before initiating navigation in a previously nonexisting sub-frame. To test: All tests pass with NetworkService enabled and disabled.
2019-05-24 22:23:43 +02:00
CefRefPtr<CefFrameHostImpl> frame_;
};
void SetMainFrame(CefRefPtr<CefBrowserHostBase> browser,
CefRefPtr<CefFrameHostImpl> frame);
void MaybeNotifyFrameCreated(CefRefPtr<CefFrameHostImpl> frame);
void MaybeNotifyFrameDetached(CefRefPtr<CefBrowserHostBase> browser,
CefRefPtr<CefFrameHostImpl> frame);
void MaybeNotifyMainFrameChanged(CefRefPtr<CefBrowserHostBase> browser,
CefRefPtr<CefFrameHostImpl> old_frame,
CefRefPtr<CefFrameHostImpl> new_frame);
void RemoveAllFrames(CefRefPtr<CefBrowserHostBase> old_browser);
chrome: Add support for Alloy style browsers and windows (see #3681) Split the Alloy runtime into bootstrap and style components. Support creation of Alloy style browsers and windows with the Chrome runtime. Chrome runtime (`--enable-chrome-runtime`) + Alloy style (`--use-alloy-style`) supports Views (`--use-views`), native parent (`--use-native`) and windowless rendering (`--off-screen-rendering-enabled`). Print preview is supported in all cases except with windowless rendering on all platforms and native parent on MacOS. It is disabled by default with Alloy style for legacy compatibility. Where supported it can be enabled or disabled globally using `--[enable|disable]-print-preview` or configured on a per-RequestContext basis using the `printing.print_preview_disabled` preference. It also behaves as expected when triggered via the PDF viewer print button. Chrome runtime + Alloy style behavior differs from Alloy runtime in the following significant ways: - Supports Chrome error pages by default. - DevTools popups are Chrome style only (cannot be windowless). - The Alloy extension API will not supported. Chrome runtime + Alloy style passes all expected Alloy ceftests except the following: - `DisplayTest.AutoResize` (Alloy extension API not supported) - `DownloadTest.*` (Download API not yet supported) - `ExtensionTest.*` (Alloy extension API not supported) This change also adds Chrome runtime support for CefContextMenuHandler::RunContextMenu (see #3293). This change also explicitly blocks (and doesn't retry) FrameAttached requests from PDF viewer and print preview excluded frames (see #3664). Known issues specific to Chrome runtime + Alloy style: - DevTools popup with windowless rendering doesn't load successfully. Use windowed rendering or remote debugging as a workaround. - Chrome style Window with Alloy style BrowserView (`--use-alloy-style --use-chrome-style-window`) does not show Chrome theme changes. To test: - Run `ceftests --enable-chrome-runtime --use-alloy-style [--use-chrome-style-window] [--use-views|--use-native] --gtest_filter=...` - Run `cefclient --enable-chrome-runtime --use-alloy-style [--use-chrome-style-window] [--use-views|--use-native|--off-screen-rendering-enabled]` - Run `cefsimple --enable-chrome-runtime --use-alloy-style [--use-views]`
2024-04-17 18:01:26 +02:00
const int browser_id_;
const bool is_popup_;
const bool is_windowless_;
const bool print_preview_enabled_;
Move message routing from CefBrowser to CefFrame (see issue #2498). This change moves the SendProcessMessage method from CefBrowser to CefFrame and adds CefBrowser parameters to OnProcessMessageReceived and OnDraggableRegionsChanged. The internal implementation has changed as follows: - Frame IDs are now a 64-bit combination of the 32-bit render_process_id and render_routing_id values that uniquely identify a RenderFrameHost (RFH). - CefFrameHostImpl objects are now managed by CefBrowserInfo with life span tied to RFH expectations. Specifically, a CefFrameHostImpl object representing a sub-frame will be created when a RenderFrame is created in the renderer process and detached when the associated RenderFrame is deleted or the renderer process in which it runs has died. - The CefFrameHostImpl object representing the main frame will always be valid but the underlying RFH (and associated frame ID) may change over time as a result of cross-origin navigations. Despite these changes calling LoadURL on the main frame object in the browser process will always navigate as expected. - Speculative RFHs, which may be created as a result of a cross-origin navigation and discarded if that navigation is not committed, are now handled correctly (e.g. ignored in most cases until they're committed). - It is less likely, but still possible, to receive a CefFrame object with an invalid frame ID (ID < 0). This can happen in cases where a RFH has not yet been created for a sub-frame. For example, when OnBeforeBrowse is called before initiating navigation in a previously nonexisting sub-frame. To test: All tests pass with NetworkService enabled and disabled.
2019-05-24 22:23:43 +02:00
CefRefPtr<CefDictionaryValue> extra_info_;
Create a ChromeBrowserHostImpl for every Chrome tab (see issue #2969) The Browser object represents the top-level Chrome browser window. One or more tabs (WebContents) are then owned by the Browser object via TabStripModel. A new Browser object can be created programmatically using "new Browser" or Browser::Create, or as a result of user action such as dragging a tab out of an existing window. New or existing tabs can also be added to an already existing Browser object. The Browser object acts as the WebContentsDelegate for all attached tabs. CEF integration requires WebContentsDelegate callbacks and notification of tab attach/detach. To support this integration we add a cef::BrowserDelegate (ChromeBrowserDelegate) member that is created in the Browser constructor and receives delegation for the Browser callbacks. ChromeBrowserDelegate creates a new ChromeBrowserHostImpl when a tab is added to a Browser for the first time, and that ChromeBrowserHostImpl continues to exist until the tab's WebContents is destroyed. The associated WebContents object does not change, but the Browser object will change when the tab is dragged between windows. CEF callback logic is shared between the chrome and alloy runtimes where possible. This shared logic has been extracted from CefBrowserHostImpl to create new CefBrowserHostBase and CefBrowserContentsDelegate classes. The CefBrowserHostImpl class is now only used with the alloy runtime and will be renamed to AlloyBrowserHostImpl in a future commit.
2020-09-18 00:24:08 +02:00
// Navigation will be blocked while |navigation_lock_| exists.
// Only accessed on the UI thread.
base::WeakPtr<NavigationLock> navigation_lock_;
// Used instead of |base::AutoLock(lock_)| in situations that might generate
// CefFrameHandler notifications. Any notifications passed to
// MaybeExecuteFrameNotification() will be queued until the lock is released,
// and then executed in order. Only accessed on the UI thread.
class NotificationStateLock final {
public:
explicit NotificationStateLock(CefBrowserInfo* browser_info);
~NotificationStateLock();
protected:
friend class CefBrowserInfo;
CefBrowserInfo* const browser_info_;
CefRefPtr<CefFrameHandler> frame_handler_;
std::unique_ptr<base::AutoLock> browser_info_lock_scope_;
std::queue<FrameNotifyOnceAction> queue_;
};
mutable base::Lock notification_lock_;
// These members must be protected by |notification_lock_|.
NotificationStateLock* notification_state_lock_ = nullptr;
CefRefPtr<CefFrameHandler> frame_handler_;
mutable base::Lock lock_;
// The below members must be protected by |lock_|.
Create a ChromeBrowserHostImpl for every Chrome tab (see issue #2969) The Browser object represents the top-level Chrome browser window. One or more tabs (WebContents) are then owned by the Browser object via TabStripModel. A new Browser object can be created programmatically using "new Browser" or Browser::Create, or as a result of user action such as dragging a tab out of an existing window. New or existing tabs can also be added to an already existing Browser object. The Browser object acts as the WebContentsDelegate for all attached tabs. CEF integration requires WebContentsDelegate callbacks and notification of tab attach/detach. To support this integration we add a cef::BrowserDelegate (ChromeBrowserDelegate) member that is created in the Browser constructor and receives delegation for the Browser callbacks. ChromeBrowserDelegate creates a new ChromeBrowserHostImpl when a tab is added to a Browser for the first time, and that ChromeBrowserHostImpl continues to exist until the tab's WebContents is destroyed. The associated WebContents object does not change, but the Browser object will change when the tab is dragged between windows. CEF callback logic is shared between the chrome and alloy runtimes where possible. This shared logic has been extracted from CefBrowserHostImpl to create new CefBrowserHostBase and CefBrowserContentsDelegate classes. The CefBrowserHostImpl class is now only used with the alloy runtime and will be renamed to AlloyBrowserHostImpl in a future commit.
2020-09-18 00:24:08 +02:00
CefRefPtr<CefBrowserHostBase> browser_;
Move message routing from CefBrowser to CefFrame (see issue #2498). This change moves the SendProcessMessage method from CefBrowser to CefFrame and adds CefBrowser parameters to OnProcessMessageReceived and OnDraggableRegionsChanged. The internal implementation has changed as follows: - Frame IDs are now a 64-bit combination of the 32-bit render_process_id and render_routing_id values that uniquely identify a RenderFrameHost (RFH). - CefFrameHostImpl objects are now managed by CefBrowserInfo with life span tied to RFH expectations. Specifically, a CefFrameHostImpl object representing a sub-frame will be created when a RenderFrame is created in the renderer process and detached when the associated RenderFrame is deleted or the renderer process in which it runs has died. - The CefFrameHostImpl object representing the main frame will always be valid but the underlying RFH (and associated frame ID) may change over time as a result of cross-origin navigations. Despite these changes calling LoadURL on the main frame object in the browser process will always navigate as expected. - Speculative RFHs, which may be created as a result of a cross-origin navigation and discarded if that navigation is not committed, are now handled correctly (e.g. ignored in most cases until they're committed). - It is less likely, but still possible, to receive a CefFrame object with an invalid frame ID (ID < 0). This can happen in cases where a RFH has not yet been created for a sub-frame. For example, when OnBeforeBrowse is called before initiating navigation in a previously nonexisting sub-frame. To test: All tests pass with NetworkService enabled and disabled.
2019-05-24 22:23:43 +02:00
// Owner of FrameInfo structs.
using FrameInfoSet =
std::set<std::unique_ptr<FrameInfo>, base::UniquePtrComparator>;
Move message routing from CefBrowser to CefFrame (see issue #2498). This change moves the SendProcessMessage method from CefBrowser to CefFrame and adds CefBrowser parameters to OnProcessMessageReceived and OnDraggableRegionsChanged. The internal implementation has changed as follows: - Frame IDs are now a 64-bit combination of the 32-bit render_process_id and render_routing_id values that uniquely identify a RenderFrameHost (RFH). - CefFrameHostImpl objects are now managed by CefBrowserInfo with life span tied to RFH expectations. Specifically, a CefFrameHostImpl object representing a sub-frame will be created when a RenderFrame is created in the renderer process and detached when the associated RenderFrame is deleted or the renderer process in which it runs has died. - The CefFrameHostImpl object representing the main frame will always be valid but the underlying RFH (and associated frame ID) may change over time as a result of cross-origin navigations. Despite these changes calling LoadURL on the main frame object in the browser process will always navigate as expected. - Speculative RFHs, which may be created as a result of a cross-origin navigation and discarded if that navigation is not committed, are now handled correctly (e.g. ignored in most cases until they're committed). - It is less likely, but still possible, to receive a CefFrame object with an invalid frame ID (ID < 0). This can happen in cases where a RFH has not yet been created for a sub-frame. For example, when OnBeforeBrowse is called before initiating navigation in a previously nonexisting sub-frame. To test: All tests pass with NetworkService enabled and disabled.
2019-05-24 22:23:43 +02:00
FrameInfoSet frame_info_set_;
// Map a global ID to one frame. These IDs are guaranteed to uniquely
// identify a RFH for its complete lifespan. See documentation on
// RenderFrameHost::GetFrameTreeNodeId() for background.
using FrameIDMap = std::unordered_map<content::GlobalRenderFrameHostId,
FrameInfo*,
content::GlobalRenderFrameHostIdHasher>;
Move message routing from CefBrowser to CefFrame (see issue #2498). This change moves the SendProcessMessage method from CefBrowser to CefFrame and adds CefBrowser parameters to OnProcessMessageReceived and OnDraggableRegionsChanged. The internal implementation has changed as follows: - Frame IDs are now a 64-bit combination of the 32-bit render_process_id and render_routing_id values that uniquely identify a RenderFrameHost (RFH). - CefFrameHostImpl objects are now managed by CefBrowserInfo with life span tied to RFH expectations. Specifically, a CefFrameHostImpl object representing a sub-frame will be created when a RenderFrame is created in the renderer process and detached when the associated RenderFrame is deleted or the renderer process in which it runs has died. - The CefFrameHostImpl object representing the main frame will always be valid but the underlying RFH (and associated frame ID) may change over time as a result of cross-origin navigations. Despite these changes calling LoadURL on the main frame object in the browser process will always navigate as expected. - Speculative RFHs, which may be created as a result of a cross-origin navigation and discarded if that navigation is not committed, are now handled correctly (e.g. ignored in most cases until they're committed). - It is less likely, but still possible, to receive a CefFrame object with an invalid frame ID (ID < 0). This can happen in cases where a RFH has not yet been created for a sub-frame. For example, when OnBeforeBrowse is called before initiating navigation in a previously nonexisting sub-frame. To test: All tests pass with NetworkService enabled and disabled.
2019-05-24 22:23:43 +02:00
FrameIDMap frame_id_map_;
// Map of global token to global ID.
using FrameTokenToIdMap = std::map<content::GlobalRenderFrameHostToken,
content::GlobalRenderFrameHostId>;
FrameTokenToIdMap frame_token_to_id_map_;
Move message routing from CefBrowser to CefFrame (see issue #2498). This change moves the SendProcessMessage method from CefBrowser to CefFrame and adds CefBrowser parameters to OnProcessMessageReceived and OnDraggableRegionsChanged. The internal implementation has changed as follows: - Frame IDs are now a 64-bit combination of the 32-bit render_process_id and render_routing_id values that uniquely identify a RenderFrameHost (RFH). - CefFrameHostImpl objects are now managed by CefBrowserInfo with life span tied to RFH expectations. Specifically, a CefFrameHostImpl object representing a sub-frame will be created when a RenderFrame is created in the renderer process and detached when the associated RenderFrame is deleted or the renderer process in which it runs has died. - The CefFrameHostImpl object representing the main frame will always be valid but the underlying RFH (and associated frame ID) may change over time as a result of cross-origin navigations. Despite these changes calling LoadURL on the main frame object in the browser process will always navigate as expected. - Speculative RFHs, which may be created as a result of a cross-origin navigation and discarded if that navigation is not committed, are now handled correctly (e.g. ignored in most cases until they're committed). - It is less likely, but still possible, to receive a CefFrame object with an invalid frame ID (ID < 0). This can happen in cases where a RFH has not yet been created for a sub-frame. For example, when OnBeforeBrowse is called before initiating navigation in a previously nonexisting sub-frame. To test: All tests pass with NetworkService enabled and disabled.
2019-05-24 22:23:43 +02:00
// The current main frame.
CefRefPtr<CefFrameHostImpl> main_frame_;
// True if the browser is currently closing.
bool is_closing_ = false;
Fix draggable region update with BackForwardCache enabled (see issue #2421) When BackForwardCache is enabled and the user navigates the main frame back/forward a new RFH may be created for an existing main frame GlobalId value and CefFrameHostImpl (e.g. an object that was previously Detach()ed after main frame navigation called SetMainFrame, but for which RenderFrameDeleted was not subsequently called due to insertion in the BackForwardCache). In this case we can re-attach the new RFH to the existing main frame CefFrameHostImpl in RenderFrameHostStateChanged and resume processing of messages. Swapping back/forward to an existing (already loaded) renderer does not trigger new notifications for draggable regions (e.g. RenderFrameObserver:: DraggableRegionsChanged is not called by default). We therefore explicitly request an update of draggable regions by sending the DidStopLoading message to the renderer. A new |reattached| parameter is added to CefFrameHandler::OnFrameAttached to support identification of BackForwardCache usage by the client. To test with unit tests: Run `ceftests --gtest_filter=DraggableRegionsTest.DraggableRegionsCrossOrigin --enable-features=BackForwardCache` To test manually: 1. Run `cefclient --enable-features=BackForwardCache --use-views --url=http://tests/draggable`, note that draggable regions work. 2. Load https://www.google.com via the address bar, note that draggable regions are removed. 3. Go back to http://tests/draggable, note that draggable regions work. 4. Go forward to https://www.google.com, note that draggable regions are removed.
2021-09-15 13:40:08 +02:00
// Only accessed on the UI thread.
std::vector<CefDraggableRegion> draggable_regions_;
};
#endif // CEF_LIBCEF_BROWSER_BROWSER_INFO_H_