cef/libcef/browser/frame_host_impl.h

189 lines
6.8 KiB
C
Raw Normal View History

// Copyright (c) 2012 The Chromium Embedded Framework Authors. All rights
// reserved. Use of this source code is governed by a BSD-style license that can
// be found in the LICENSE file.
#ifndef CEF_LIBCEF_BROWSER_FRAME_HOST_IMPL_H_
#define CEF_LIBCEF_BROWSER_FRAME_HOST_IMPL_H_
#pragma once
Move message routing from CefBrowser to CefFrame (see issue #2498). This change moves the SendProcessMessage method from CefBrowser to CefFrame and adds CefBrowser parameters to OnProcessMessageReceived and OnDraggableRegionsChanged. The internal implementation has changed as follows: - Frame IDs are now a 64-bit combination of the 32-bit render_process_id and render_routing_id values that uniquely identify a RenderFrameHost (RFH). - CefFrameHostImpl objects are now managed by CefBrowserInfo with life span tied to RFH expectations. Specifically, a CefFrameHostImpl object representing a sub-frame will be created when a RenderFrame is created in the renderer process and detached when the associated RenderFrame is deleted or the renderer process in which it runs has died. - The CefFrameHostImpl object representing the main frame will always be valid but the underlying RFH (and associated frame ID) may change over time as a result of cross-origin navigations. Despite these changes calling LoadURL on the main frame object in the browser process will always navigate as expected. - Speculative RFHs, which may be created as a result of a cross-origin navigation and discarded if that navigation is not committed, are now handled correctly (e.g. ignored in most cases until they're committed). - It is less likely, but still possible, to receive a CefFrame object with an invalid frame ID (ID < 0). This can happen in cases where a RFH has not yet been created for a sub-frame. For example, when OnBeforeBrowse is called before initiating navigation in a previously nonexisting sub-frame. To test: All tests pass with NetworkService enabled and disabled.
2019-05-24 22:23:43 +02:00
#include <memory>
#include <queue>
#include <string>
#include "include/cef_frame.h"
#include "base/synchronization/lock.h"
#include "cef/libcef/common/mojom/cef.mojom.h"
#include "mojo/public/cpp/bindings/receiver_set.h"
#include "mojo/public/cpp/bindings/remote.h"
Move message routing from CefBrowser to CefFrame (see issue #2498). This change moves the SendProcessMessage method from CefBrowser to CefFrame and adds CefBrowser parameters to OnProcessMessageReceived and OnDraggableRegionsChanged. The internal implementation has changed as follows: - Frame IDs are now a 64-bit combination of the 32-bit render_process_id and render_routing_id values that uniquely identify a RenderFrameHost (RFH). - CefFrameHostImpl objects are now managed by CefBrowserInfo with life span tied to RFH expectations. Specifically, a CefFrameHostImpl object representing a sub-frame will be created when a RenderFrame is created in the renderer process and detached when the associated RenderFrame is deleted or the renderer process in which it runs has died. - The CefFrameHostImpl object representing the main frame will always be valid but the underlying RFH (and associated frame ID) may change over time as a result of cross-origin navigations. Despite these changes calling LoadURL on the main frame object in the browser process will always navigate as expected. - Speculative RFHs, which may be created as a result of a cross-origin navigation and discarded if that navigation is not committed, are now handled correctly (e.g. ignored in most cases until they're committed). - It is less likely, but still possible, to receive a CefFrame object with an invalid frame ID (ID < 0). This can happen in cases where a RFH has not yet been created for a sub-frame. For example, when OnBeforeBrowse is called before initiating navigation in a previously nonexisting sub-frame. To test: All tests pass with NetworkService enabled and disabled.
2019-05-24 22:23:43 +02:00
#include "ui/base/page_transition_types.h"
namespace content {
class RenderFrameHost;
Move message routing from CefBrowser to CefFrame (see issue #2498). This change moves the SendProcessMessage method from CefBrowser to CefFrame and adds CefBrowser parameters to OnProcessMessageReceived and OnDraggableRegionsChanged. The internal implementation has changed as follows: - Frame IDs are now a 64-bit combination of the 32-bit render_process_id and render_routing_id values that uniquely identify a RenderFrameHost (RFH). - CefFrameHostImpl objects are now managed by CefBrowserInfo with life span tied to RFH expectations. Specifically, a CefFrameHostImpl object representing a sub-frame will be created when a RenderFrame is created in the renderer process and detached when the associated RenderFrame is deleted or the renderer process in which it runs has died. - The CefFrameHostImpl object representing the main frame will always be valid but the underlying RFH (and associated frame ID) may change over time as a result of cross-origin navigations. Despite these changes calling LoadURL on the main frame object in the browser process will always navigate as expected. - Speculative RFHs, which may be created as a result of a cross-origin navigation and discarded if that navigation is not committed, are now handled correctly (e.g. ignored in most cases until they're committed). - It is less likely, but still possible, to receive a CefFrame object with an invalid frame ID (ID < 0). This can happen in cases where a RFH has not yet been created for a sub-frame. For example, when OnBeforeBrowse is called before initiating navigation in a previously nonexisting sub-frame. To test: All tests pass with NetworkService enabled and disabled.
2019-05-24 22:23:43 +02:00
struct Referrer;
} // namespace content
class GURL;
class CefBrowserInfo;
Create a ChromeBrowserHostImpl for every Chrome tab (see issue #2969) The Browser object represents the top-level Chrome browser window. One or more tabs (WebContents) are then owned by the Browser object via TabStripModel. A new Browser object can be created programmatically using "new Browser" or Browser::Create, or as a result of user action such as dragging a tab out of an existing window. New or existing tabs can also be added to an already existing Browser object. The Browser object acts as the WebContentsDelegate for all attached tabs. CEF integration requires WebContentsDelegate callbacks and notification of tab attach/detach. To support this integration we add a cef::BrowserDelegate (ChromeBrowserDelegate) member that is created in the Browser constructor and receives delegation for the Browser callbacks. ChromeBrowserDelegate creates a new ChromeBrowserHostImpl when a tab is added to a Browser for the first time, and that ChromeBrowserHostImpl continues to exist until the tab's WebContents is destroyed. The associated WebContents object does not change, but the Browser object will change when the tab is dragged between windows. CEF callback logic is shared between the chrome and alloy runtimes where possible. This shared logic has been extracted from CefBrowserHostImpl to create new CefBrowserHostBase and CefBrowserContentsDelegate classes. The CefBrowserHostImpl class is now only used with the alloy runtime and will be renamed to AlloyBrowserHostImpl in a future commit.
2020-09-18 00:24:08 +02:00
class CefBrowserHostBase;
Move message routing from CefBrowser to CefFrame (see issue #2498). This change moves the SendProcessMessage method from CefBrowser to CefFrame and adds CefBrowser parameters to OnProcessMessageReceived and OnDraggableRegionsChanged. The internal implementation has changed as follows: - Frame IDs are now a 64-bit combination of the 32-bit render_process_id and render_routing_id values that uniquely identify a RenderFrameHost (RFH). - CefFrameHostImpl objects are now managed by CefBrowserInfo with life span tied to RFH expectations. Specifically, a CefFrameHostImpl object representing a sub-frame will be created when a RenderFrame is created in the renderer process and detached when the associated RenderFrame is deleted or the renderer process in which it runs has died. - The CefFrameHostImpl object representing the main frame will always be valid but the underlying RFH (and associated frame ID) may change over time as a result of cross-origin navigations. Despite these changes calling LoadURL on the main frame object in the browser process will always navigate as expected. - Speculative RFHs, which may be created as a result of a cross-origin navigation and discarded if that navigation is not committed, are now handled correctly (e.g. ignored in most cases until they're committed). - It is less likely, but still possible, to receive a CefFrame object with an invalid frame ID (ID < 0). This can happen in cases where a RFH has not yet been created for a sub-frame. For example, when OnBeforeBrowse is called before initiating navigation in a previously nonexisting sub-frame. To test: All tests pass with NetworkService enabled and disabled.
2019-05-24 22:23:43 +02:00
// Implementation of CefFrame. CefFrameHostImpl objects should always be created
// or retrieved via CefBrowerInfo.
class CefFrameHostImpl : public CefFrame, public cef::mojom::BrowserFrame {
public:
// Create a temporary sub-frame.
Move message routing from CefBrowser to CefFrame (see issue #2498). This change moves the SendProcessMessage method from CefBrowser to CefFrame and adds CefBrowser parameters to OnProcessMessageReceived and OnDraggableRegionsChanged. The internal implementation has changed as follows: - Frame IDs are now a 64-bit combination of the 32-bit render_process_id and render_routing_id values that uniquely identify a RenderFrameHost (RFH). - CefFrameHostImpl objects are now managed by CefBrowserInfo with life span tied to RFH expectations. Specifically, a CefFrameHostImpl object representing a sub-frame will be created when a RenderFrame is created in the renderer process and detached when the associated RenderFrame is deleted or the renderer process in which it runs has died. - The CefFrameHostImpl object representing the main frame will always be valid but the underlying RFH (and associated frame ID) may change over time as a result of cross-origin navigations. Despite these changes calling LoadURL on the main frame object in the browser process will always navigate as expected. - Speculative RFHs, which may be created as a result of a cross-origin navigation and discarded if that navigation is not committed, are now handled correctly (e.g. ignored in most cases until they're committed). - It is less likely, but still possible, to receive a CefFrame object with an invalid frame ID (ID < 0). This can happen in cases where a RFH has not yet been created for a sub-frame. For example, when OnBeforeBrowse is called before initiating navigation in a previously nonexisting sub-frame. To test: All tests pass with NetworkService enabled and disabled.
2019-05-24 22:23:43 +02:00
CefFrameHostImpl(scoped_refptr<CefBrowserInfo> browser_info,
int64_t parent_frame_id);
// Create a frame backed by a RFH and owned by CefBrowserInfo.
CefFrameHostImpl(scoped_refptr<CefBrowserInfo> browser_info,
content::RenderFrameHost* render_frame_host);
CefFrameHostImpl(const CefFrameHostImpl&) = delete;
CefFrameHostImpl& operator=(const CefFrameHostImpl&) = delete;
~CefFrameHostImpl() override;
// CefFrame methods
bool IsValid() override;
void Undo() override;
void Redo() override;
void Cut() override;
void Copy() override;
void Paste() override;
void Delete() override;
void SelectAll() override;
void ViewSource() override;
void GetSource(CefRefPtr<CefStringVisitor> visitor) override;
void GetText(CefRefPtr<CefStringVisitor> visitor) override;
void LoadRequest(CefRefPtr<CefRequest> request) override;
void LoadURL(const CefString& url) override;
void ExecuteJavaScript(const CefString& jsCode,
const CefString& scriptUrl,
int startLine) override;
bool IsMain() override;
bool IsFocused() override;
CefString GetName() override;
int64 GetIdentifier() override;
CefRefPtr<CefFrame> GetParent() override;
CefString GetURL() override;
CefRefPtr<CefBrowser> GetBrowser() override;
CefRefPtr<CefV8Context> GetV8Context() override;
void VisitDOM(CefRefPtr<CefDOMVisitor> visitor) override;
CefRefPtr<CefURLRequest> CreateURLRequest(
CefRefPtr<CefRequest> request,
CefRefPtr<CefURLRequestClient> client) override;
Move message routing from CefBrowser to CefFrame (see issue #2498). This change moves the SendProcessMessage method from CefBrowser to CefFrame and adds CefBrowser parameters to OnProcessMessageReceived and OnDraggableRegionsChanged. The internal implementation has changed as follows: - Frame IDs are now a 64-bit combination of the 32-bit render_process_id and render_routing_id values that uniquely identify a RenderFrameHost (RFH). - CefFrameHostImpl objects are now managed by CefBrowserInfo with life span tied to RFH expectations. Specifically, a CefFrameHostImpl object representing a sub-frame will be created when a RenderFrame is created in the renderer process and detached when the associated RenderFrame is deleted or the renderer process in which it runs has died. - The CefFrameHostImpl object representing the main frame will always be valid but the underlying RFH (and associated frame ID) may change over time as a result of cross-origin navigations. Despite these changes calling LoadURL on the main frame object in the browser process will always navigate as expected. - Speculative RFHs, which may be created as a result of a cross-origin navigation and discarded if that navigation is not committed, are now handled correctly (e.g. ignored in most cases until they're committed). - It is less likely, but still possible, to receive a CefFrame object with an invalid frame ID (ID < 0). This can happen in cases where a RFH has not yet been created for a sub-frame. For example, when OnBeforeBrowse is called before initiating navigation in a previously nonexisting sub-frame. To test: All tests pass with NetworkService enabled and disabled.
2019-05-24 22:23:43 +02:00
void SendProcessMessage(CefProcessId target_process,
CefRefPtr<CefProcessMessage> message) override;
bool is_temporary() const { return frame_id_ == kInvalidFrameId; }
void SetFocused(bool focused);
Move message routing from CefBrowser to CefFrame (see issue #2498). This change moves the SendProcessMessage method from CefBrowser to CefFrame and adds CefBrowser parameters to OnProcessMessageReceived and OnDraggableRegionsChanged. The internal implementation has changed as follows: - Frame IDs are now a 64-bit combination of the 32-bit render_process_id and render_routing_id values that uniquely identify a RenderFrameHost (RFH). - CefFrameHostImpl objects are now managed by CefBrowserInfo with life span tied to RFH expectations. Specifically, a CefFrameHostImpl object representing a sub-frame will be created when a RenderFrame is created in the renderer process and detached when the associated RenderFrame is deleted or the renderer process in which it runs has died. - The CefFrameHostImpl object representing the main frame will always be valid but the underlying RFH (and associated frame ID) may change over time as a result of cross-origin navigations. Despite these changes calling LoadURL on the main frame object in the browser process will always navigate as expected. - Speculative RFHs, which may be created as a result of a cross-origin navigation and discarded if that navigation is not committed, are now handled correctly (e.g. ignored in most cases until they're committed). - It is less likely, but still possible, to receive a CefFrame object with an invalid frame ID (ID < 0). This can happen in cases where a RFH has not yet been created for a sub-frame. For example, when OnBeforeBrowse is called before initiating navigation in a previously nonexisting sub-frame. To test: All tests pass with NetworkService enabled and disabled.
2019-05-24 22:23:43 +02:00
void RefreshAttributes();
// Notification that a move or resize of the renderer's containing window has
// started. Used on Windows and Linux with the Alloy runtime.
void NotifyMoveOrResizeStarted();
// Load the specified request.
void LoadRequest(cef::mojom::RequestParamsPtr params);
Move message routing from CefBrowser to CefFrame (see issue #2498). This change moves the SendProcessMessage method from CefBrowser to CefFrame and adds CefBrowser parameters to OnProcessMessageReceived and OnDraggableRegionsChanged. The internal implementation has changed as follows: - Frame IDs are now a 64-bit combination of the 32-bit render_process_id and render_routing_id values that uniquely identify a RenderFrameHost (RFH). - CefFrameHostImpl objects are now managed by CefBrowserInfo with life span tied to RFH expectations. Specifically, a CefFrameHostImpl object representing a sub-frame will be created when a RenderFrame is created in the renderer process and detached when the associated RenderFrame is deleted or the renderer process in which it runs has died. - The CefFrameHostImpl object representing the main frame will always be valid but the underlying RFH (and associated frame ID) may change over time as a result of cross-origin navigations. Despite these changes calling LoadURL on the main frame object in the browser process will always navigate as expected. - Speculative RFHs, which may be created as a result of a cross-origin navigation and discarded if that navigation is not committed, are now handled correctly (e.g. ignored in most cases until they're committed). - It is less likely, but still possible, to receive a CefFrame object with an invalid frame ID (ID < 0). This can happen in cases where a RFH has not yet been created for a sub-frame. For example, when OnBeforeBrowse is called before initiating navigation in a previously nonexisting sub-frame. To test: All tests pass with NetworkService enabled and disabled.
2019-05-24 22:23:43 +02:00
// Load the specified URL.
void LoadURLWithExtras(const std::string& url,
const content::Referrer& referrer,
ui::PageTransition transition,
const std::string& extra_headers);
// Send a command to the renderer for execution.
void SendCommand(const std::string& command);
void SendCommandWithResponse(
const std::string& command,
cef::mojom::RenderFrame::SendCommandWithResponseCallback
response_callback);
Move message routing from CefBrowser to CefFrame (see issue #2498). This change moves the SendProcessMessage method from CefBrowser to CefFrame and adds CefBrowser parameters to OnProcessMessageReceived and OnDraggableRegionsChanged. The internal implementation has changed as follows: - Frame IDs are now a 64-bit combination of the 32-bit render_process_id and render_routing_id values that uniquely identify a RenderFrameHost (RFH). - CefFrameHostImpl objects are now managed by CefBrowserInfo with life span tied to RFH expectations. Specifically, a CefFrameHostImpl object representing a sub-frame will be created when a RenderFrame is created in the renderer process and detached when the associated RenderFrame is deleted or the renderer process in which it runs has died. - The CefFrameHostImpl object representing the main frame will always be valid but the underlying RFH (and associated frame ID) may change over time as a result of cross-origin navigations. Despite these changes calling LoadURL on the main frame object in the browser process will always navigate as expected. - Speculative RFHs, which may be created as a result of a cross-origin navigation and discarded if that navigation is not committed, are now handled correctly (e.g. ignored in most cases until they're committed). - It is less likely, but still possible, to receive a CefFrame object with an invalid frame ID (ID < 0). This can happen in cases where a RFH has not yet been created for a sub-frame. For example, when OnBeforeBrowse is called before initiating navigation in a previously nonexisting sub-frame. To test: All tests pass with NetworkService enabled and disabled.
2019-05-24 22:23:43 +02:00
// Send JavaScript to the renderer for execution.
void SendJavaScript(const std::u16string& jsCode,
const std::string& scriptUrl,
int startLine);
Create a ChromeBrowserHostImpl for every Chrome tab (see issue #2969) The Browser object represents the top-level Chrome browser window. One or more tabs (WebContents) are then owned by the Browser object via TabStripModel. A new Browser object can be created programmatically using "new Browser" or Browser::Create, or as a result of user action such as dragging a tab out of an existing window. New or existing tabs can also be added to an already existing Browser object. The Browser object acts as the WebContentsDelegate for all attached tabs. CEF integration requires WebContentsDelegate callbacks and notification of tab attach/detach. To support this integration we add a cef::BrowserDelegate (ChromeBrowserDelegate) member that is created in the Browser constructor and receives delegation for the Browser callbacks. ChromeBrowserDelegate creates a new ChromeBrowserHostImpl when a tab is added to a Browser for the first time, and that ChromeBrowserHostImpl continues to exist until the tab's WebContents is destroyed. The associated WebContents object does not change, but the Browser object will change when the tab is dragged between windows. CEF callback logic is shared between the chrome and alloy runtimes where possible. This shared logic has been extracted from CefBrowserHostImpl to create new CefBrowserHostBase and CefBrowserContentsDelegate classes. The CefBrowserHostImpl class is now only used with the alloy runtime and will be renamed to AlloyBrowserHostImpl in a future commit.
2020-09-18 00:24:08 +02:00
// Called from CefBrowserHostBase::DidStopLoading.
Move message routing from CefBrowser to CefFrame (see issue #2498). This change moves the SendProcessMessage method from CefBrowser to CefFrame and adds CefBrowser parameters to OnProcessMessageReceived and OnDraggableRegionsChanged. The internal implementation has changed as follows: - Frame IDs are now a 64-bit combination of the 32-bit render_process_id and render_routing_id values that uniquely identify a RenderFrameHost (RFH). - CefFrameHostImpl objects are now managed by CefBrowserInfo with life span tied to RFH expectations. Specifically, a CefFrameHostImpl object representing a sub-frame will be created when a RenderFrame is created in the renderer process and detached when the associated RenderFrame is deleted or the renderer process in which it runs has died. - The CefFrameHostImpl object representing the main frame will always be valid but the underlying RFH (and associated frame ID) may change over time as a result of cross-origin navigations. Despite these changes calling LoadURL on the main frame object in the browser process will always navigate as expected. - Speculative RFHs, which may be created as a result of a cross-origin navigation and discarded if that navigation is not committed, are now handled correctly (e.g. ignored in most cases until they're committed). - It is less likely, but still possible, to receive a CefFrame object with an invalid frame ID (ID < 0). This can happen in cases where a RFH has not yet been created for a sub-frame. For example, when OnBeforeBrowse is called before initiating navigation in a previously nonexisting sub-frame. To test: All tests pass with NetworkService enabled and disabled.
2019-05-24 22:23:43 +02:00
void MaybeSendDidStopLoading();
void ExecuteJavaScriptWithUserGestureForTests(const CefString& javascript);
// Returns the RFH associated with this frame. Must be called on the UI
// thread.
Move message routing from CefBrowser to CefFrame (see issue #2498). This change moves the SendProcessMessage method from CefBrowser to CefFrame and adds CefBrowser parameters to OnProcessMessageReceived and OnDraggableRegionsChanged. The internal implementation has changed as follows: - Frame IDs are now a 64-bit combination of the 32-bit render_process_id and render_routing_id values that uniquely identify a RenderFrameHost (RFH). - CefFrameHostImpl objects are now managed by CefBrowserInfo with life span tied to RFH expectations. Specifically, a CefFrameHostImpl object representing a sub-frame will be created when a RenderFrame is created in the renderer process and detached when the associated RenderFrame is deleted or the renderer process in which it runs has died. - The CefFrameHostImpl object representing the main frame will always be valid but the underlying RFH (and associated frame ID) may change over time as a result of cross-origin navigations. Despite these changes calling LoadURL on the main frame object in the browser process will always navigate as expected. - Speculative RFHs, which may be created as a result of a cross-origin navigation and discarded if that navigation is not committed, are now handled correctly (e.g. ignored in most cases until they're committed). - It is less likely, but still possible, to receive a CefFrame object with an invalid frame ID (ID < 0). This can happen in cases where a RFH has not yet been created for a sub-frame. For example, when OnBeforeBrowse is called before initiating navigation in a previously nonexisting sub-frame. To test: All tests pass with NetworkService enabled and disabled.
2019-05-24 22:23:43 +02:00
content::RenderFrameHost* GetRenderFrameHost() const;
Move message routing from CefBrowser to CefFrame (see issue #2498). This change moves the SendProcessMessage method from CefBrowser to CefFrame and adds CefBrowser parameters to OnProcessMessageReceived and OnDraggableRegionsChanged. The internal implementation has changed as follows: - Frame IDs are now a 64-bit combination of the 32-bit render_process_id and render_routing_id values that uniquely identify a RenderFrameHost (RFH). - CefFrameHostImpl objects are now managed by CefBrowserInfo with life span tied to RFH expectations. Specifically, a CefFrameHostImpl object representing a sub-frame will be created when a RenderFrame is created in the renderer process and detached when the associated RenderFrame is deleted or the renderer process in which it runs has died. - The CefFrameHostImpl object representing the main frame will always be valid but the underlying RFH (and associated frame ID) may change over time as a result of cross-origin navigations. Despite these changes calling LoadURL on the main frame object in the browser process will always navigate as expected. - Speculative RFHs, which may be created as a result of a cross-origin navigation and discarded if that navigation is not committed, are now handled correctly (e.g. ignored in most cases until they're committed). - It is less likely, but still possible, to receive a CefFrame object with an invalid frame ID (ID < 0). This can happen in cases where a RFH has not yet been created for a sub-frame. For example, when OnBeforeBrowse is called before initiating navigation in a previously nonexisting sub-frame. To test: All tests pass with NetworkService enabled and disabled.
2019-05-24 22:23:43 +02:00
// Owned frame objects will be detached explicitly when the associated
// RenderFrame is deleted. Temporary frame objects will be detached
// implicitly via CefBrowserInfo::browser() returning nullptr. Returns true
// if this was the first call to Detach() for the frame.
bool Detach();
Fix draggable region update with BackForwardCache enabled (see issue #2421) When BackForwardCache is enabled and the user navigates the main frame back/forward a new RFH may be created for an existing main frame GlobalId value and CefFrameHostImpl (e.g. an object that was previously Detach()ed after main frame navigation called SetMainFrame, but for which RenderFrameDeleted was not subsequently called due to insertion in the BackForwardCache). In this case we can re-attach the new RFH to the existing main frame CefFrameHostImpl in RenderFrameHostStateChanged and resume processing of messages. Swapping back/forward to an existing (already loaded) renderer does not trigger new notifications for draggable regions (e.g. RenderFrameObserver:: DraggableRegionsChanged is not called by default). We therefore explicitly request an update of draggable regions by sending the DidStopLoading message to the renderer. A new |reattached| parameter is added to CefFrameHandler::OnFrameAttached to support identification of BackForwardCache usage by the client. To test with unit tests: Run `ceftests --gtest_filter=DraggableRegionsTest.DraggableRegionsCrossOrigin --enable-features=BackForwardCache` To test manually: 1. Run `cefclient --enable-features=BackForwardCache --use-views --url=http://tests/draggable`, note that draggable regions work. 2. Load https://www.google.com via the address bar, note that draggable regions are removed. 3. Go back to http://tests/draggable, note that draggable regions work. 4. Go forward to https://www.google.com, note that draggable regions are removed.
2021-09-15 13:40:08 +02:00
// A frame has swapped to active status from prerendering or the back-forward
// cache. We may need to re-attach if the RFH has changed. See
// https://crbug.com/1179502#c8 for additional background.
void MaybeReAttach(scoped_refptr<CefBrowserInfo> browser_info,
content::RenderFrameHost* render_frame_host);
// cef::mojom::BrowserFrame methods forwarded from CefBrowserFrame.
void SendMessage(const std::string& name, base::Value arguments) override;
void FrameAttached(mojo::PendingRemote<cef::mojom::RenderFrame> render_frame,
bool reattached) override;
void DidFinishFrameLoad(const GURL& validated_url,
int32_t http_status_code) override;
void UpdateDraggableRegions(
absl::optional<std::vector<cef::mojom::DraggableRegionEntryPtr>> regions)
override;
Move message routing from CefBrowser to CefFrame (see issue #2498). This change moves the SendProcessMessage method from CefBrowser to CefFrame and adds CefBrowser parameters to OnProcessMessageReceived and OnDraggableRegionsChanged. The internal implementation has changed as follows: - Frame IDs are now a 64-bit combination of the 32-bit render_process_id and render_routing_id values that uniquely identify a RenderFrameHost (RFH). - CefFrameHostImpl objects are now managed by CefBrowserInfo with life span tied to RFH expectations. Specifically, a CefFrameHostImpl object representing a sub-frame will be created when a RenderFrame is created in the renderer process and detached when the associated RenderFrame is deleted or the renderer process in which it runs has died. - The CefFrameHostImpl object representing the main frame will always be valid but the underlying RFH (and associated frame ID) may change over time as a result of cross-origin navigations. Despite these changes calling LoadURL on the main frame object in the browser process will always navigate as expected. - Speculative RFHs, which may be created as a result of a cross-origin navigation and discarded if that navigation is not committed, are now handled correctly (e.g. ignored in most cases until they're committed). - It is less likely, but still possible, to receive a CefFrame object with an invalid frame ID (ID < 0). This can happen in cases where a RFH has not yet been created for a sub-frame. For example, when OnBeforeBrowse is called before initiating navigation in a previously nonexisting sub-frame. To test: All tests pass with NetworkService enabled and disabled.
2019-05-24 22:23:43 +02:00
static const int64_t kMainFrameId;
static const int64_t kFocusedFrameId;
static const int64_t kUnspecifiedFrameId;
static const int64_t kInvalidFrameId;
2020-02-14 22:58:58 +01:00
// PageTransition type for explicit navigations. This must pass the check in
// ContentBrowserClient::IsExplicitNavigation for debug URLs (HandleDebugURL)
// to work as expected.
static const ui::PageTransition kPageTransitionExplicit;
Move message routing from CefBrowser to CefFrame (see issue #2498). This change moves the SendProcessMessage method from CefBrowser to CefFrame and adds CefBrowser parameters to OnProcessMessageReceived and OnDraggableRegionsChanged. The internal implementation has changed as follows: - Frame IDs are now a 64-bit combination of the 32-bit render_process_id and render_routing_id values that uniquely identify a RenderFrameHost (RFH). - CefFrameHostImpl objects are now managed by CefBrowserInfo with life span tied to RFH expectations. Specifically, a CefFrameHostImpl object representing a sub-frame will be created when a RenderFrame is created in the renderer process and detached when the associated RenderFrame is deleted or the renderer process in which it runs has died. - The CefFrameHostImpl object representing the main frame will always be valid but the underlying RFH (and associated frame ID) may change over time as a result of cross-origin navigations. Despite these changes calling LoadURL on the main frame object in the browser process will always navigate as expected. - Speculative RFHs, which may be created as a result of a cross-origin navigation and discarded if that navigation is not committed, are now handled correctly (e.g. ignored in most cases until they're committed). - It is less likely, but still possible, to receive a CefFrame object with an invalid frame ID (ID < 0). This can happen in cases where a RFH has not yet been created for a sub-frame. For example, when OnBeforeBrowse is called before initiating navigation in a previously nonexisting sub-frame. To test: All tests pass with NetworkService enabled and disabled.
2019-05-24 22:23:43 +02:00
private:
int64 GetFrameId() const;
scoped_refptr<CefBrowserInfo> GetBrowserInfo() const;
Create a ChromeBrowserHostImpl for every Chrome tab (see issue #2969) The Browser object represents the top-level Chrome browser window. One or more tabs (WebContents) are then owned by the Browser object via TabStripModel. A new Browser object can be created programmatically using "new Browser" or Browser::Create, or as a result of user action such as dragging a tab out of an existing window. New or existing tabs can also be added to an already existing Browser object. The Browser object acts as the WebContentsDelegate for all attached tabs. CEF integration requires WebContentsDelegate callbacks and notification of tab attach/detach. To support this integration we add a cef::BrowserDelegate (ChromeBrowserDelegate) member that is created in the Browser constructor and receives delegation for the Browser callbacks. ChromeBrowserDelegate creates a new ChromeBrowserHostImpl when a tab is added to a Browser for the first time, and that ChromeBrowserHostImpl continues to exist until the tab's WebContents is destroyed. The associated WebContents object does not change, but the Browser object will change when the tab is dragged between windows. CEF callback logic is shared between the chrome and alloy runtimes where possible. This shared logic has been extracted from CefBrowserHostImpl to create new CefBrowserHostBase and CefBrowserContentsDelegate classes. The CefBrowserHostImpl class is now only used with the alloy runtime and will be renamed to AlloyBrowserHostImpl in a future commit.
2020-09-18 00:24:08 +02:00
CefRefPtr<CefBrowserHostBase> GetBrowserHostBase() const;
Move message routing from CefBrowser to CefFrame (see issue #2498). This change moves the SendProcessMessage method from CefBrowser to CefFrame and adds CefBrowser parameters to OnProcessMessageReceived and OnDraggableRegionsChanged. The internal implementation has changed as follows: - Frame IDs are now a 64-bit combination of the 32-bit render_process_id and render_routing_id values that uniquely identify a RenderFrameHost (RFH). - CefFrameHostImpl objects are now managed by CefBrowserInfo with life span tied to RFH expectations. Specifically, a CefFrameHostImpl object representing a sub-frame will be created when a RenderFrame is created in the renderer process and detached when the associated RenderFrame is deleted or the renderer process in which it runs has died. - The CefFrameHostImpl object representing the main frame will always be valid but the underlying RFH (and associated frame ID) may change over time as a result of cross-origin navigations. Despite these changes calling LoadURL on the main frame object in the browser process will always navigate as expected. - Speculative RFHs, which may be created as a result of a cross-origin navigation and discarded if that navigation is not committed, are now handled correctly (e.g. ignored in most cases until they're committed). - It is less likely, but still possible, to receive a CefFrame object with an invalid frame ID (ID < 0). This can happen in cases where a RFH has not yet been created for a sub-frame. For example, when OnBeforeBrowse is called before initiating navigation in a previously nonexisting sub-frame. To test: All tests pass with NetworkService enabled and disabled.
2019-05-24 22:23:43 +02:00
// Send an action to the remote RenderFrame. This will queue the action if the
// remote frame is not yet attached.
using RenderFrameType = mojo::Remote<cef::mojom::RenderFrame>;
using RenderFrameAction = base::OnceCallback<void(const RenderFrameType&)>;
void SendToRenderFrame(const std::string& function_name,
RenderFrameAction action);
Move message routing from CefBrowser to CefFrame (see issue #2498). This change moves the SendProcessMessage method from CefBrowser to CefFrame and adds CefBrowser parameters to OnProcessMessageReceived and OnDraggableRegionsChanged. The internal implementation has changed as follows: - Frame IDs are now a 64-bit combination of the 32-bit render_process_id and render_routing_id values that uniquely identify a RenderFrameHost (RFH). - CefFrameHostImpl objects are now managed by CefBrowserInfo with life span tied to RFH expectations. Specifically, a CefFrameHostImpl object representing a sub-frame will be created when a RenderFrame is created in the renderer process and detached when the associated RenderFrame is deleted or the renderer process in which it runs has died. - The CefFrameHostImpl object representing the main frame will always be valid but the underlying RFH (and associated frame ID) may change over time as a result of cross-origin navigations. Despite these changes calling LoadURL on the main frame object in the browser process will always navigate as expected. - Speculative RFHs, which may be created as a result of a cross-origin navigation and discarded if that navigation is not committed, are now handled correctly (e.g. ignored in most cases until they're committed). - It is less likely, but still possible, to receive a CefFrame object with an invalid frame ID (ID < 0). This can happen in cases where a RFH has not yet been created for a sub-frame. For example, when OnBeforeBrowse is called before initiating navigation in a previously nonexisting sub-frame. To test: All tests pass with NetworkService enabled and disabled.
2019-05-24 22:23:43 +02:00
void OnRenderFrameDisconnect();
Fix draggable region update with BackForwardCache enabled (see issue #2421) When BackForwardCache is enabled and the user navigates the main frame back/forward a new RFH may be created for an existing main frame GlobalId value and CefFrameHostImpl (e.g. an object that was previously Detach()ed after main frame navigation called SetMainFrame, but for which RenderFrameDeleted was not subsequently called due to insertion in the BackForwardCache). In this case we can re-attach the new RFH to the existing main frame CefFrameHostImpl in RenderFrameHostStateChanged and resume processing of messages. Swapping back/forward to an existing (already loaded) renderer does not trigger new notifications for draggable regions (e.g. RenderFrameObserver:: DraggableRegionsChanged is not called by default). We therefore explicitly request an update of draggable regions by sending the DidStopLoading message to the renderer. A new |reattached| parameter is added to CefFrameHandler::OnFrameAttached to support identification of BackForwardCache usage by the client. To test with unit tests: Run `ceftests --gtest_filter=DraggableRegionsTest.DraggableRegionsCrossOrigin --enable-features=BackForwardCache` To test manually: 1. Run `cefclient --enable-features=BackForwardCache --use-views --url=http://tests/draggable`, note that draggable regions work. 2. Load https://www.google.com via the address bar, note that draggable regions are removed. 3. Go back to http://tests/draggable, note that draggable regions work. 4. Go forward to https://www.google.com, note that draggable regions are removed.
2021-09-15 13:40:08 +02:00
Move message routing from CefBrowser to CefFrame (see issue #2498). This change moves the SendProcessMessage method from CefBrowser to CefFrame and adds CefBrowser parameters to OnProcessMessageReceived and OnDraggableRegionsChanged. The internal implementation has changed as follows: - Frame IDs are now a 64-bit combination of the 32-bit render_process_id and render_routing_id values that uniquely identify a RenderFrameHost (RFH). - CefFrameHostImpl objects are now managed by CefBrowserInfo with life span tied to RFH expectations. Specifically, a CefFrameHostImpl object representing a sub-frame will be created when a RenderFrame is created in the renderer process and detached when the associated RenderFrame is deleted or the renderer process in which it runs has died. - The CefFrameHostImpl object representing the main frame will always be valid but the underlying RFH (and associated frame ID) may change over time as a result of cross-origin navigations. Despite these changes calling LoadURL on the main frame object in the browser process will always navigate as expected. - Speculative RFHs, which may be created as a result of a cross-origin navigation and discarded if that navigation is not committed, are now handled correctly (e.g. ignored in most cases until they're committed). - It is less likely, but still possible, to receive a CefFrame object with an invalid frame ID (ID < 0). This can happen in cases where a RFH has not yet been created for a sub-frame. For example, when OnBeforeBrowse is called before initiating navigation in a previously nonexisting sub-frame. To test: All tests pass with NetworkService enabled and disabled.
2019-05-24 22:23:43 +02:00
const bool is_main_frame_;
// The following members may be read/modified from any thread. All access must
// be protected by |state_lock_|.
mutable base::Lock state_lock_;
int64 frame_id_;
Move message routing from CefBrowser to CefFrame (see issue #2498). This change moves the SendProcessMessage method from CefBrowser to CefFrame and adds CefBrowser parameters to OnProcessMessageReceived and OnDraggableRegionsChanged. The internal implementation has changed as follows: - Frame IDs are now a 64-bit combination of the 32-bit render_process_id and render_routing_id values that uniquely identify a RenderFrameHost (RFH). - CefFrameHostImpl objects are now managed by CefBrowserInfo with life span tied to RFH expectations. Specifically, a CefFrameHostImpl object representing a sub-frame will be created when a RenderFrame is created in the renderer process and detached when the associated RenderFrame is deleted or the renderer process in which it runs has died. - The CefFrameHostImpl object representing the main frame will always be valid but the underlying RFH (and associated frame ID) may change over time as a result of cross-origin navigations. Despite these changes calling LoadURL on the main frame object in the browser process will always navigate as expected. - Speculative RFHs, which may be created as a result of a cross-origin navigation and discarded if that navigation is not committed, are now handled correctly (e.g. ignored in most cases until they're committed). - It is less likely, but still possible, to receive a CefFrame object with an invalid frame ID (ID < 0). This can happen in cases where a RFH has not yet been created for a sub-frame. For example, when OnBeforeBrowse is called before initiating navigation in a previously nonexisting sub-frame. To test: All tests pass with NetworkService enabled and disabled.
2019-05-24 22:23:43 +02:00
scoped_refptr<CefBrowserInfo> browser_info_;
bool is_focused_;
CefString url_;
CefString name_;
int64 parent_frame_id_;
Move message routing from CefBrowser to CefFrame (see issue #2498). This change moves the SendProcessMessage method from CefBrowser to CefFrame and adds CefBrowser parameters to OnProcessMessageReceived and OnDraggableRegionsChanged. The internal implementation has changed as follows: - Frame IDs are now a 64-bit combination of the 32-bit render_process_id and render_routing_id values that uniquely identify a RenderFrameHost (RFH). - CefFrameHostImpl objects are now managed by CefBrowserInfo with life span tied to RFH expectations. Specifically, a CefFrameHostImpl object representing a sub-frame will be created when a RenderFrame is created in the renderer process and detached when the associated RenderFrame is deleted or the renderer process in which it runs has died. - The CefFrameHostImpl object representing the main frame will always be valid but the underlying RFH (and associated frame ID) may change over time as a result of cross-origin navigations. Despite these changes calling LoadURL on the main frame object in the browser process will always navigate as expected. - Speculative RFHs, which may be created as a result of a cross-origin navigation and discarded if that navigation is not committed, are now handled correctly (e.g. ignored in most cases until they're committed). - It is less likely, but still possible, to receive a CefFrame object with an invalid frame ID (ID < 0). This can happen in cases where a RFH has not yet been created for a sub-frame. For example, when OnBeforeBrowse is called before initiating navigation in a previously nonexisting sub-frame. To test: All tests pass with NetworkService enabled and disabled.
2019-05-24 22:23:43 +02:00
// The following members are only accessed on the UI thread.
content::RenderFrameHost* render_frame_host_ = nullptr;
std::queue<std::pair<std::string, RenderFrameAction>>
queued_renderer_actions_;
Move message routing from CefBrowser to CefFrame (see issue #2498). This change moves the SendProcessMessage method from CefBrowser to CefFrame and adds CefBrowser parameters to OnProcessMessageReceived and OnDraggableRegionsChanged. The internal implementation has changed as follows: - Frame IDs are now a 64-bit combination of the 32-bit render_process_id and render_routing_id values that uniquely identify a RenderFrameHost (RFH). - CefFrameHostImpl objects are now managed by CefBrowserInfo with life span tied to RFH expectations. Specifically, a CefFrameHostImpl object representing a sub-frame will be created when a RenderFrame is created in the renderer process and detached when the associated RenderFrame is deleted or the renderer process in which it runs has died. - The CefFrameHostImpl object representing the main frame will always be valid but the underlying RFH (and associated frame ID) may change over time as a result of cross-origin navigations. Despite these changes calling LoadURL on the main frame object in the browser process will always navigate as expected. - Speculative RFHs, which may be created as a result of a cross-origin navigation and discarded if that navigation is not committed, are now handled correctly (e.g. ignored in most cases until they're committed). - It is less likely, but still possible, to receive a CefFrame object with an invalid frame ID (ID < 0). This can happen in cases where a RFH has not yet been created for a sub-frame. For example, when OnBeforeBrowse is called before initiating navigation in a previously nonexisting sub-frame. To test: All tests pass with NetworkService enabled and disabled.
2019-05-24 22:23:43 +02:00
mojo::Remote<cef::mojom::RenderFrame> render_frame_;
Move message routing from CefBrowser to CefFrame (see issue #2498). This change moves the SendProcessMessage method from CefBrowser to CefFrame and adds CefBrowser parameters to OnProcessMessageReceived and OnDraggableRegionsChanged. The internal implementation has changed as follows: - Frame IDs are now a 64-bit combination of the 32-bit render_process_id and render_routing_id values that uniquely identify a RenderFrameHost (RFH). - CefFrameHostImpl objects are now managed by CefBrowserInfo with life span tied to RFH expectations. Specifically, a CefFrameHostImpl object representing a sub-frame will be created when a RenderFrame is created in the renderer process and detached when the associated RenderFrame is deleted or the renderer process in which it runs has died. - The CefFrameHostImpl object representing the main frame will always be valid but the underlying RFH (and associated frame ID) may change over time as a result of cross-origin navigations. Despite these changes calling LoadURL on the main frame object in the browser process will always navigate as expected. - Speculative RFHs, which may be created as a result of a cross-origin navigation and discarded if that navigation is not committed, are now handled correctly (e.g. ignored in most cases until they're committed). - It is less likely, but still possible, to receive a CefFrame object with an invalid frame ID (ID < 0). This can happen in cases where a RFH has not yet been created for a sub-frame. For example, when OnBeforeBrowse is called before initiating navigation in a previously nonexisting sub-frame. To test: All tests pass with NetworkService enabled and disabled.
2019-05-24 22:23:43 +02:00
IMPLEMENT_REFCOUNTING(CefFrameHostImpl);
};
#endif // CEF_LIBCEF_BROWSER_FRAME_HOST_IMPL_H_