Prior to this change the user had to repeatedly tap "Load more" when
scrolling. This is tedious for the user.
In addition, the previous code had bugs that meant that not all statuses
were being loaded. Users could leave the app for a while (overnight,
say), and when returning would discover far fewer statuses than had
actually been posted.
Fix this, following the architecture first introduced for notifications
(Fragment -> ViewModel -> Repository -> Source/Mediator).
- Load statuses for cached and non-cached timelines using Paging3
- Show Failures during a load, and the user can retry
- Delete the "Reading order" preference, it is no longer necessary
The previous code did not credit all third party code used in the app,
or provide access to the licenses.
Fix this by adopting the "aboutlibraries" library, which processes
dependencies at build time and generates a list of dependencies,
versions, and license information to display to the user.
Use this to also ensure that the non-source dependencies (artwork,
emoji) are given appropriate credit.
Migrate to touchimageview from photoview, and adjust the touch logic to correctly handle single finger drag, two finger pinch/stretch, flings, taps, and swipes.
As before, the features are:
- Single tap, show/hide controls and media description
- Double tap, zoom in/out
- Single finger drag up/down, scale/translate image, dismiss if scrolled too far
- Single finger drag left/right
- When not zoomed, swipe to next image if multiple images present
- When zoomed, scroll to edge of image, then to next image if multiple images present
- Two finger pinch/zoom, zoom in/out on the image
Behaviour differences to previous code
1. Bug fix: The image can't get "stuck" when zoomed, and impossible to scroll
2. Bug fix: Pinching is not mis-interpreted as a fling, closing the image
3. Bug fix: The zoom state of images is not lost or misinterpreted when the user swipes through multiple images
4. Bug fix: Double-tap zooms all the way, instead of stopping
5. Tapping outside the image does not dismiss it, controls and description show/hide
Fixes https://github.com/tuskyapp/Tusky/issues/3562, https://github.com/tuskyapp/Tusky/issues/2297
* Enforce lint cleanliness when building
The volume of lintable issues is growing. To stem the tide:
1. Add `app/lint-baseline.xml`, which contains the current set of lint issues.
Any issue appearing here will not cause the build to fail.
2. Move lint configuration settings in to `lint.xml`.
3. Update the lint configuration so that any issue (i.e., any issue not
in lint-baseline.xml) causes a build failure.
4. Add the lint tasks as depedency when assembling an APK, to ensure the
lint checks are run.
* lint: Convert launcher images to webp
* Move lint.xml location
* Don't lint when assembling
* Update baseline
* Show the difference between edited statuses
Diff each status against the previous version, comparing the different
HTML as XML to produce a structured diff.
Mark new content with `<ins>`, deleted content with `<del>`.
Convert these to styled spans in `ViewEditsAdapter`.
* Update diffx to 1.1.1
Fixes issue with diffs splitting on accented characters
* Style edited strings with Android spans
Don't use HTML spans and try and format them, create real Android spans.
Do this with a custom tag handler that can add custom spans that set the
text paint appropriately.
* Lint
* Move colors in to theme_colors.xml
* Draw a roundrect for the backoround, add start/end padding
Make the background slightlysofter by drawing it as a roundrect.
Make the spans easier to understand by padding the start/end of each one with
the width of a " " character. This is visual only, the underlying text is not
changed.
* Catch exceptions when parsing XML
* Move sorting in to Dispatchers.Default coroutine
* Scope the loader type
* Remove alpha
* Unmodified output from "Convert Java to Kotlin" on NotificationsFragment.java
* Bare minimum changes to get this to compile and run
- Use `lateinit` for `eventhub`, `adapter`, `preferences`, and `scrolllistener`
- Removed override for accountManager, it can be used from the superclass
- Add `?.` where non-nullity could not (yet) be guaranteed
- Remove `?` from type lists where non-nullity is guaranteed
- Explicitly convert lists to mutable where necessary
- Delete unused function `findReplyPosition`
* Remove all unnecessary non-null (!!) assertions
The previous change meant some values are no longer nullable. Remove the
non-null assertions.
* Lint ListStatusAccessibilityDelegate call
- Remove redundant constructor
- Move block outside of `()`
* Use `let` when handling compose button visibility on scroll
* Replace a `requireNonNull` with `!!`
* Remove redundant return values
* Remove or rename unused lambda parameters
* Remove unnecessary type parameters
* Remove unnecessary null checks
* Replace cascading-if statement with `when`
* Simplify calculation of `topId`
* Use more appropriate list properties and methods
- Access the last value with `.last()`
- Access the last index with `.lastIndex`
- Replace logical-chain with `asRightOrNull` and `?.`
- `.isNotEmpty()`, not `!...isEmpty()`
* Inline unnecessary variable
* Use PrefKeys constants instead of bare strings
* Use `requireContext()` instead of `context!!`
* Replace deprecated `onActivityCreated()` with `onViewCreated()`
* Remove unnecessary variable setting
* Replace `size == 0` check with `isEmpty()`
* Format with ktlint, no functionality changes
* Convert NotifcationsAdapter to Kotlin
Does not compile, this is the unchanged output of the "Convert to Kotlin"
function
* Minimum changes to get NotificationsAdapter to compile
* Remove unnecessary visibility modifiers
* Use `isNotEmpty()`
* Remove unused lambda parameters
* Convert cascading-if to `when`
* Simplifiy assignment op
* Use explicit argument names with `copy()`
* Use `.firstOrNull()` instead of `if`
* Mark as lateinit to avoid unnecessary null checks
* Format with ktlint, whitespace changes only
* Bare minimum necessary to demonstrate paging in notifications
Create `NotificationsPagingSource`. This uses a new `notifications2()` API
call, which will exist until all the code has been adapted. Instead of
using placeholders,
Create `NotificationsPagingAdapter` (will replace `NotificationsAdapater`)
to consume this data.
Expose the paging source view a new `NotificationsViewModel` `flow`, and
submit new pages to the adapter as they are available in
`NotificationsFragment`.
Comment out any other code in `NotificationsFragment` that deals with
loading data from the network. This will be updated as necessary, either
here, or in the view model.
Lots of functionality is missing, including:
- Different views for different notification types
- Starting at the remembered notification position
- Interacting with notifications
- Adjusting the UI state to match the loading state
These will be added incrementally.
* Migrate StatusNotificationViewHolder impl. to NotificationsPagingAdapter
With this change `NotificationsPagingAdapter` shows notifications about a
status correctly.
- Introduce a `ViewHolder` abstract class that all Notification view holders
derive from. Modify the fallback view holder to use this.
- Implement `StatusNotificationViewHolder`. Much of the code is from the
existing implementation in the `NotificationAdapater`.
- The original code split the code that binds values to views between the
adapter's `bindViewHolder` method and the view holder's methods.
In this code, all of the binding code is in the view holder, in a `bind`
method. This is called by the adapter's `bindViewHolder` method. This keeps
all the binding logic in the view holder, where it belongs.
- The new `StatusNotificationViewHolder` uses view binding to access its views
instead of `findViewById`.
- Logically, information about whether to show sensitive media, or open
content warnings should be part of the `StatusDisplayOptions`. So add those
as fields, and populate them appropriately.
This affects code outside notification handling, which will be adjusted
later.
* Note some TODOs to complete before the PR is finished
* Extract StatusNotificationViewHolder to a new file
* Add TODO for NotificationViewData.Concrete
* Convert the adapter to take NotificationViewData.Concrete
* Add a view holder for regular status notifications
* Migrate Follow and FollowRequest notifications
* Migrate report notifications
* Convert onViewThread to use the adapter data
* Convert onViewMedia to use the adapter data
* Convert onMore to use the adapter data
* Convert onReply to use the adapter data
* Convert NotificationViewData to Kotlin
* Re-implement the reblog functionality
- Move reblogging in to the view model
- Update the UI via the adapter's `snapshot()` and `notifyItemChanged()`
methods
* Re-implement the favourite functionality
Same approach as reblog
* Re-implement the bookmark functionality
Same approach as reblog
* Add TODO re StatusActionListener interface
* Add TODO re event handling
* Re-implementing the voting functionality
* Re-implement viewing hidden content
- Hidden media
- Content behind a content warning
* Add a TODO re pinning
* Re-implement "Show more" / "Show less"
* Delete unused updateStatus() function
* Comment out the scroll listener for the moment
* Re-implement applying filters to notifications
Introduce `NotificationsRepository`, to provide access to the notifications
stream.
When changing the filters the flow is as follows:
- User clicks "Apply" in the fragment.
- Fragment calls `viewModel.accept()` with a `UiAction.ApplyFilter` (new
class).
- View model maintains a private flow of incoming UI actions. The new action
is emitted to that flow.
- In view model, `notificationFilter` waits for `.ApplyFilter` actions, and
ensures the filter is saved, then emits it.
- In view model, `pagingDataFlow` waits for new items from
`notificationsFilter` and fetches the notifications from the repository in
response. The repository provides `Notification`, so the model maps them to
`NotificationViewData.Concrete` for display by the adapter.
- In view model the UI state also waits for new items from
`notificationsFilter` and emits a new `UiState` every time the filter is
changed.
When opening the fragment for the first time:
- All of the above machinery, but `notificationFilter` also fetches the filter
from the active account and emits that first. This triggers the first fetch
and the first update of `uiState`.
Also:
- Add TODOs for functionality that is not implemented yet
- Delete a lot of dead code from NotificationsFragment
* Include important preference values in `uiState`
Listen to the flow of eventHub events, filtered to preference changes that
are relevant to the notification view.
When preferences change (or when the view model starts), fetch the current
values, and include them in `uiState`.
Remove preference handling from `NotificationsFragment`, and just use
the values from `uiState`.
Adjust how the `useAbsoluteTime` preference is handled. The previous code
loaded new content (via a diffutil) in to the adapter, which would trigger
a re-binding of the timestamp.
As the adapter content is immutable, the new code simply triggers a
re-binding of the views that are currently visible on screen.
* Update UI in response to different load states
Notifications can be loaded at the top and bottom of the timeline. Add a
new layout to show the progress of these loads, and any errors that can
occur.
Catch network errors in `NotificationsPagingSource` and convert to
`LoadState.Error`.
Add a header/footer to the notifications list to show the load state.
Collect the load state from the adapter, use this to drive the visibility
of different views.
* Save and restore the last read notification ID
Use this when fetching notifications, to centre the list around the
notification that was last read.
* Call notifyItemRangeChanged with the correct parameters
* Don't try and save list position if there are no items in the list
* Show/hide the "Nothing to see" view appropriately
* Update comments
* Handle the case where the notification key no longer exists
* Re-implement support for showMediaPreview and other settings
* Re-implement "hide FAB when scrolling" preference
* Delete dead code
* Delete Notifications Adapater and Placeholder types
* Remove NotificationViewData.Concrete subclass
Now there's no Placeholder, everything is a NotificationViewData.
* Improve how notification pages are loaded if the first notification is missing or filtered
* Re-implement clear notifications, show errors
* s/default/from/
* Add missing headers
* Don't process bookmarking via EventHub
- Initiating a bookmark is triggered by the fragment sending a
StatusUiAction.Bookmark
- View model receives this, makes API call, waits for response, emits either
a success or failure state
- Fragment collects success/failure states, updates the UI accordingly
* Don't process favourites via EventHub
* Don't process reblog via EventHub
* Don't process poll votes with EventHub
This removes EventHub from the fragment
* Respond to follow requests via the view model
* Docs and cleanup
* Typo and editing pass
* Minor edits for clarity
* Remove newline in diagram
* Reorder sequence diagram
* s/authorize/accept/
* s/pagingDataFlow/pagingData/
* Add brief KDoc
* Try and fetch a full first page of notifications
* Call the API method `notifications` again
* Log UI errors at the point of handling
* Remove unused variable
* Replace String.format() with interpolation
* Convert NotificationViewData to data class
* Rename copy() to make(), to avoid confusion with default copy() method
* Lint
* Update app/src/main/res/layout/simple_list_item_1.xml
* Update app/src/main/java/com/keylesspalace/tusky/components/notifications/NotificationsPagingAdapter.kt
* Update app/src/main/java/com/keylesspalace/tusky/components/notifications/NotificationsViewModel.kt
* Update app/src/main/java/com/keylesspalace/tusky/fragment/NotificationsFragment.kt
* Update app/src/main/java/com/keylesspalace/tusky/viewdata/NotificationViewData.kt
* Initial NotificationsViewModel tests
* Add missing import
* More tests, some cleanup
* Comments, re-order some code
* Set StateRestorationPolicy.PREVENT_WHEN_EMPTY
* Mark clearNotifications() as "suspend"
* Catch exceptions from clearNotifications and emit
* Update TODOs with explanations
* Ensure initial fetch uses a null ID
* Stop/start collecting pagingData based on the lifecycle
* Don't hide the list while refreshing
* Refresh notifications on mutes and blocks
* Update tests now clearNotifications is a suspend fun
* Add "Refresh" menu to NotificationsFragment
* Use account.name over account.displayName
* Update app/src/main/java/com/keylesspalace/tusky/fragment/NotificationsFragment.kt
Co-authored-by: Konrad Pozniak <connyduck@users.noreply.github.com>
* Mark layoutmanager as lateinit
* Mark layoutmanager as lateinit
* Refactor generating UI text
* Add Copyright header
* Correctly apply notification filters
* Show follow request header in notifications
* Wait for follow request actions to complete, so the reqeuest is sent
* Remove duplicate copyright header
* Revert copyright change in unmodified file
* Null check response body
* Move NotificationsFragment to component.notifications
* Use viewlifecycleowner.lifecyclescope
* Show notification filter as a dialog rather than a popup window
The popup window:
- Is inconsistent UI
- Requires a custom layout
- Didn't play nicely with viewbinding
* Refresh adapter on block/mute
* Scroll up slightly when new content is loaded
* Restore progressbar
* Lint
* Update app/src/main/res/layout/simple_list_item_1.xml
---------
Co-authored-by: Konrad Pozniak <connyduck@users.noreply.github.com>
Not all Robolectric tests interact with activities, so lazy loading the activity can speed them up.
I benchmarked the impact with gradle-profiler. Each test run performed 6 warmup runs, and then 10 benchmarked runs with and without this change.
Without this change (all values rounded to nearest second):
Mean: 151
Median: 149
P75: 157
StdDev: 10
With this change:
Mean: 127
Median: 125
P75: 130
StdDev: 7
So a ~ 18% reduction in median and P75 times,
This uses unusual code provided by Mikhail Lopatkin of Gradle Inc:
https://github.com/gradle/gradle/issues/23914#issuecomment-1431909019
It wraps the git sha function in a "value source". This allows it to interact correctly with configuration caching.
Because the code is longer than before, it is now broken out into its own file getGitSha.gradle.
* Add initial feature for viewing trending graphs. Currently only views hash tag trends.
Contains API additions, tab additions and a set of trending components.
* Add clickable system through a LinkListener. Duplicates a little code from SFragment.
* Add accessibility description.
* The background for the graph should match the background for black theme too.
* Add error handling through a state flow system using existing code as an example.
* Graphing: Use a primary and a secondary line. Remove under line fill. Apply line thickness. Dotted end of line.
* Trending changes: New layout for trending: Cell. Use ViewBinding. Add padding to RecyclerView to stop the FAB from hiding content. Multiple bugs in GraphView resolved. Wide (landscape, for example) will show 4 columns, portrait will show 2. Remove unused base holder class. ViewModel invalidate scoping changed. Some renaming to variables made. For uses and accounts, use longs. These could be big numbers eventually. TagViewHolder renamed to TrendingTagViewHolder.
* Trending changes: Remove old layout. Update cell textsizes and use proper string. Remove bad comment.
* Trending changes: Refresh the main drawer when the tabs are edited. This will allow the trending item to toggle.
* Trending changes: Add a trending activity to be able to view the trending data from the main drawer.
* Trending changes: The title text should be changed to Trending Hashtags.
* Trending changes: Add meta color to draw axis etc. Draw the date boundaries on the graph. Remove dates from each cell and place them in the list as a header. Graphs should be proportional to the highest historical value. Add a new interface to control whether the FAB should be visible (important when switching tabs, the state is lost). Add header to the adapter and viewdata structures. Add QOL extensions for getting the dates from history.
* Trending changes: Refresh FAB through the main activity and FabFragment interface. Trending has no FAB.
* Trending changes: Make graph proportional to the highest usage value. Fixes to the graph ratio calculations.
* Trending changes: KtLintFix
* Trending changes: Remove accidental build gradle change. Remove trending cases. Remove unused progress. Set drawer button addition explicitly to false, leaving the code there for future issue #3010. Remove unnecessary arguments for intent. Remove media preview preferences, there is nothing to preview. No padding between hashtag symbol and text. Do not ellipsize hashtags.
* Trending changes: Use bottomsheet slide in animation helper for opening the hashtag intent. Remove explicit layout height from the XML and apply it to the view holder itself. The height was not being respected in XML.
* Use some platform standards for styling
- Align on an 8dp grid
- Use android:attr for paddingStart and paddingEnd
- Use textAppearanceListItem variants
- Adjust constraints to handle different size containers
* Correct lineWidth calculations
Previous code didn't convert the value to pixels, so it was always displaying
as a hairline stroke, irrespective of the value in the layout file.
While I'm here, rename from lineThickness to lineWidth, to be consistent
with parameters like strokeWidth.
* Does not need to inherit from FabFragment
* Rename to TrendingAdapter
"Paging" in the adapter name is a misnomer here
* Clean up comments, use full class name as tag
* Simplify TrendingViewModel
- Remove unncessary properties
- Fetch tags and map in invalidate()
- emptyList() instead of listOf() for clarity
* Remove line dividers, use X-axis to separate content
Experiment with UI -- instead of dividers between each item, draw an explicit
x-axis for each chart, and add a little more vertical padding, to see if that
provides a cleaner separation between the content
* Adjust date format
- Show day and year
- Use platform attributes for size
* Locale-aware format of numbers
Format numbers < 100,000 by inserting locale-aware separators. Numbers larger
are scaled and have K, M, G, ... etc suffix appended.
* Prevent a crash if viewData is empty
Don't access viewData without first checking if it's empty. This can be the
case if the server returned an empty list for some reason, or the data has
been filtered.
* Filter out tags the user has filtered from their home timeline
Invalidate the list if the user's preferences change, as that may indicate
they've changed their filters.
* Experiment with alternative layout
* Set chart height to 160dp to align to an 8dp grid
* Draw ticks that are 5% the height of the x-axis
* Legend adjustments
- Use tuskyblue for the ticks
- Wrap legend components in a layout so they can have a dedicated background
- Use a 60% transparent background for the legend to retain legibility
if lines go under it
* Bezier curves, shorter cell height
* More tweaks
- List tags in order of popularity, most popular first
- Make it clear that uses/accounts in the legend are totals, not current
- Show current values at end of the chart
* Hide FAB
* Fix crash, it's not always hosted in an ActionButtonActivity
* Arrange totals vertically in landscape layout
* Always add the Trending drawer menu if it's not a tab
* Revert unrelated whitespace changes
* One more whitespace revert
---------
Co-authored-by: Nik Clayton <nik@ngo.org.uk>
Robolectric normally swallows output from `Log.*` calls in tests and
the code under test. This can make debugging failing tests more
difficult than it needs to be.
Set `robolectric.logging.enabled` to `true` to enable the logs.
* update to Api 33, fix some deprecations
* fix deprecated serializable/parcelable methods
* ask for notification permission
* fix code formatting
* add back comment in PreferencesActivity
Nik Clayton
Goooler
Conny Duck
Conny Duck
mcclure
David Edwards
Jake Wharton
Konrad Pozniak
Eva Tatarka
Colin Lee