Previous code was inconsistent about whether or not a notification toast
was shown after copying text (contrary to platform guidelines), and
there was some code duplication.
Fix this with a new `ClipboardUseCase` with a `copyTextTo` method that
handles copying text to the clipboard and showing a message afterwards
(depending on platform level).
Extend the "suggested accounts" accessibility actions to include any
mentions in the account's bio. Links, mentions, and hashtags are now
shown with a button to easily copy them.
Extend the "trending links" accessibility actions with a new "copy link"
action.
Consolidate common functionality in to the new
`PachliRecyclerviewAccessibilityDelegate` base class.
The copy button meant that some dialogs did not return the item click.
Fix this by having the adapter listen for clicks and forward them on.
Pre-emptively move the adapter to core.ui, as it's going to be useful
for the other accessiblity delegates.
Fixes#1108
This makes it easier to share links from a regular timeline (where text
is not selectable).
Listen for long clicks on spans by launching a delayed runnable that
waits `getLongPressTimeout()` ms before sending an intent that shows the
share sheet for the clicked span.
If the span's link is not the same as the text (e.g., it's a mention or
a hashtag) then the text of the span is also sent as the title to show
in the share sheet.
While I'm here, the official LinkMovementMethodCompat does the same job
as NoTrailingSpaceLinkMovementMethod, so delete the latter code in
favour of the former.
Fixes#695
Provide two new lab preferences for controlling the layout and content
of main navigation tabs.
Tabs can now be justfied to start, end, or fully (if room). Start/end
justification may put the tabs closer to the user's fingers, depending
on how they hold the device. Fully justified uses the full width of the
tab bar (if the tabs don't require scrolling).
The content can be set to one of:
- Icon only (previous behaviour)
- Text only
- Icon with text beside
- Icon with text below
Fixes#336
The existing code downloaded any attachments to the user's "Downloads"
folder. If the user is logged in with several accounts these downloads
will be mixed up together.
Fix this by adding a new preference that allows the user to specify the
downloads should be placed in a sub-folder per account, named after the
account.
To do this:
- Add an interface for enums that can be used as preferences, with
properties for the string resource to display and the value to store.
- Add `EnumListPreference`, a `ListPreference` that allows the user to
choose between different enum values.
- Add a `DownloadLocation` enum and preference key so the user can
choose the location.
- Add a `core.domain` module, with a use case for downloading URLs that
respect's the user's download preference. Use this use-case everywhere
that files are currently downloaded.
Fixes#938
Previous code didn't set the textDirection for the status content, so
the first para of RTL text might be rendered incorrectly.
In addition, mentions and tags weren't BIDI wrapped, so would appear as
"foo@" and "foo#" in RTL statuses, instead of "@foo" and "#foo".
Fix both of these issues.
Fixes#870
Clean up the notification handling code and fix a lot of bugs, hopefully
without introducing new ones in the process.
Specific bugs discovered and fixed:
- The code that tried to sync notification filtering state between the
server and Pachli could fail, leaving things in an inconsistent state,
resulting in dropped notifications. Remove that code, do filtering
client-side.
- Logging out of an account would disable push notifications for all
accounts.
- If any account did not support push notifications then push
notifications were disabled for all accounts.
- If any account did not support push notifications the user was
prompted to log out of all accounts. Drop that entirely.
- The UnifiedPush library could get to a state where configuring the
notification mechanism would silently fail,
The preferences UI now has a section for notifications, showing:
- The Unified Push distributor in use (if any)
- A mechanism to change the distributor
- Per-account configuration and notification fetch details
- Battery optimisation state
General changes:
- Update to UnifiedPush library 2.4.0.
- NotificationFetcher.fetchAndShow() can now fetch a single account's
notifications, or all accounts, depending on data passed to the worker.
- Use ApiResult for `push/subscription` responses.
- Drop the "needs migration" terminology for the more specific "has push
scope", to make it clear what the issue with the account is.
Mastodon supports in-query search operators, such as `has:image`,
`language:en`, or `in:library`. Previously the user had to enter them in
to the query directly.
This provides a chip-based UI that allows the user to set values for
these operators.
## Server
- Add new search capabilities to record the faceted search features the
server reports.
- Update definitions for Mastodon, Friendica, and GoToSocial to specify
which versions of the operations they support.
## SearchOperator / SearchOperatorViewData
- Represents each supported operator and associated viewdata.
## SearchActivity / activity_search.xml
- Conditionally display a chip for each facet depending on the server's
level of support.
- Implement the UI for each chip. They display dialogs of varying levels
of complexity depending on the underlying operation.
## FragmentSearch
- Display the progress as a LinearProgressIndicator instead of an
indeterminate ProgressBar. This makes it more visible under the search
facets.
Previously, if a status was filtered with "WARN" and was shown in the
timeline with the name of the filter, and the user then decided to
change
that filter, they had to:
1. Open the left navigation menu
2. Navigate to "Account preferences"
3. Open "Filters"
4. Find the filter they want to edit, tap it
5. Make the change, and save
6. "Back" to the list of filters
7. "Back" to "Account preferences"
8. "Back" to the timeline
That's a lot of clicks for a simple action.
Change this. Now the filtered status includes an "Edit filter" button
that takes the user directly to step 5, and when they press "Back" they
return directly to the timeline.
To do this create a new filter action, `onEditFilterById`. Update the
listeners to launch `EditFilterActivity` if appropriate.
Modify `item_status_filtered.xml` to show the new button.
Update the accessibility delegate to show just the "Show anyway" and
"Edit filter" actions. Modify `FilterableStatusViewHolder` to expose
the information it needs to do this.
Mastodon now supports additional (optional) author information to show
as a byline on preview cards.
Use this (if included), to show the author's avatar, name, and link to
their profile. If tapped a click on a new `Target.BYLINE` target is
registered allowing fragments/activities to launch
`ViewProfileActivity`.
Include this as an action in `ListStatusAccessibilityDelegate`, and
provide `TrendingLinksAccessibilityDelegate` to provide accessibility
actions when viewing trending links.
Previous code did not provide whitespace between different media labels
when media is not loaded.
In addition, the icon for the media was centre-aligned vertically with
the text, making it difficult to scan and determine when one media label
ends and another one starts.
Fix this by adding an 8dp margin between the media labels, and using a
TextView subclass that vertically aligns the media icon with the first
line of text.
Set the compound drawables with relative alignment, so they behave
appropriately in RTL layouts.
Fixes#751.
Implement suggestions as a new `feature:suggestions` module, with
associated activity, fragment, etc.
Suggested accounts are shown with their normal information, as well as
information about the number of follows / followers, and a guide to
posting frequency, so the user can make a more informed decision about
whether to follow or not.
In the previous code `PachliError` could correctly chain errors and
generate error messages, `ApiError` didn't, which is why there was the
temporary `ApiError.fmt()` extension function.
Rewrite `ApiError` to implement `PachliError` so it gets these benefits
and to reduce the number of different error-handling mechanisms in the
code.
Main changes:
- `PachliError` is now an interface so it can be extended by other
error interfaces.
- All the `ApiError` subclasses implement `PachliError`, and can
specify the error string and interpolated variables at the point of
declaration.
- Update `ListsRepository` and `ServerRepository` to return
`PachliError` subclasses.
Previous code was inconsistent about using getServerErrorMessage() and
whether or not the case where getServerErrorMessage() returns null was
handled.
Switch to using getErrorString() which does handle the null case and
always returns a usable string.
Some string resources are rendered temporarily unused by this change.
They will be used again soon, so configure lint to ignore them at the
moment.
Use `unicodeWrap` when inserting placeholders in error messages so they
set the correct text direction.
Update some strings with formatting directives to (a) include `_fmt`
in the name, and (b) use `%1$s` instead of `%s`.
Previous code was inconsistent about how and when the FAB was hidden if
the user had set the relevant preference.
- Sometimes the FAB has hidden by setting the visibility to false, which
removed it with no animation.
- Sometimes the value of the preference was checked once, when the
fragment or activity was created.
- Some timelines didn't show the FAB (Hashtags, Favourites, Bookmarks,
TrendingLinks, TrendingStatuses).
- Logic for figuring out which `ComposeActivity` intent to use was
scattered across different files.
Improve this by:
- Expose changes to the `FAB_HIDE` preference in the relevant viewmodels
as a flow the UI component can collect.
- Centralise the show/hide logic in a new `ActionButtonScrollListener`
class, and always using `show()`/`hide()` to animate the transition.
- Centralise the logic for creating the `ComposeActivity` intent in
`TabViewData`.
Previous code would handle some expected exceptions (IO, HTTP) when
fetching a timeline, and show them to the user. Any other exception
would crash.
Now, surface all exceptions. Treat IO and HTTP exceptions as retryable
and show the "Retry" option, all others are considered non-retryable.
Provide a specific error string for exceptions caused by bad JSON.
Previous code used custom regular expressions to extract URLs, hashtags,
and mentions from text while the user was writing a post. These were
inconsistent with the ones that Mastodon uses so the derived character
count could be wrong.
As well as being visually incorrect this could prevent the user from
posting a status that was within the length limit, or allow them to
attempt to post a status that was over the length limit (which would
then fail).
Fix this by dropping the homegrown regular expressions and using the
same text parsing library that Mastodon users; twitter-text. This has
been converted to Kotlin and the functionality related to Twitter
specific features has been removed.
The hashtag handling has been adjusted, as Mastodon is more permissive
about the positions where hashtags can appear than Twitter is, in
particular, a hashtag does not need to be preceded with whitespace if
the tag appears after some scripts, such as Hirigana.
Previous code expected callers to typically provide the drawable and the
error message string resource, resulting in duplicate code at many
callsites.
Replace with three canned messages for empty containers, generic errors,
and network errors respectively. The images for these are fixed, the
caller may choose a different string resource for the error if there is
a more specific option.
Update and simplify the call sites.
Move `ListsActivity`, along with fragments and viewmodels, to a new
`feature:lists` module.
Previous code used the `item_follow_request` layout, which was not
ideal, so update it to use a dedicated layout, `item_account_in_list`.
The UI uses strings and views originally defined in the main app, so
move them elsewhere so they can be re-used.
- `BackgroundMessageView` moves to `core.ui`.
- `Lazy` moves to `core.common`.
- `ThrowableExtensions` split; the extensions specific to throwables
from network activity move to `core.network`, others move to `core.ui`.
- `BindingHolder` moves to `core.ui`
- Shared drawables and strings move to `core.ui`.
Some users report that Pachli is not retrieving/displaying notifications
in a timely fashion.
To assist in diagnosing these errors, provide an additional set of tabs
on the "About" screen that contain information about how Pachli is
fetching notifications, and if not, why not.
Allow the user to save notification related logs and other details to a
file that can be attached to an e-mail or bug report.
Recording data:
- Provide a `NotificationConfig` singleton with properties to record
different aspects of the notification configuration. Update these
properties as different notification actions occur.
- Store logs in a `LogEntryEntity` table. Log events of interest with a
new `Timber` `LogEntryTree` that is planted in all cases.
- Add `PruneLogEntryEntityWorker` to trim saved logs to the last 48
hours.
Display:
- Add a `NotificationFragment` to `AboutActivity`. It hosts two other
fragments in tabs to show details from `NotificationConfig` and the
relevant logs, as well as controls for interacting with them.
Bug fixes:
- Filter out notifications with a null tag when processing active
notifications, prevents an NPE crash
Other changes:
- Log more details when errors occur so the bug reports are more helpful
- Use format strings so any overhead of building the string is only
incurred if the message is actually logged
- Pass throwables as the first parameter so they are logged with the
stacktrace
Previously, `AboutActivity` had buttons and links to show the privacy
policy and licenses of dependencies.
Change this to a selection of fragments in tabs, one tab each for:
- General "About" information
- Licenses
- Privacy Policy
The information shown hasn't changed, but this lays the groundwork for
including additional tabs in the future for information like server
rules, detected capabilities, or troubleshooting information.
Nik Clayton
Languages add-on
Weblate (bot)
Weblate (bot)
Ricky From Hong Kong
Aindriú Mac Giolla Eoin
Miles Krell
ButterflyOfFire
