newlib/libgloss/bfin/include/defBF514.h

491 lines
27 KiB
C

/*
* The authors hereby grant permission to use, copy, modify, distribute,
* and license this software and its documentation for any purpose, provided
* that existing copyright notices are retained in all copies and that this
* notice is included verbatim in any distributions. No written agreement,
* license, or royalty fee is required for any of the authorized uses.
* Modifications to this software may be copyrighted by their authors
* and need not follow the licensing terms described here, provided that
* the new terms are clearly indicated on the first page of each file where
* they apply.
*/
/*
** Copyright (C) 2009 Analog Devices, Inc.
**
************************************************************************************
**
** This include file contains a list of macro "defines" to enable the programmer
** to use symbolic names for register-access and bit-manipulation.
**
**/
#ifndef _DEF_BF514_H
#define _DEF_BF514_H
/* Include all Core registers and bit definitions */
#include <def_LPBlackfin.h>
/* SYSTEM & MMR ADDRESS DEFINITIONS FOR ADSP-BF514 */
/* Include defBF51x_base.h for the set of #defines that are common to all ADSP-BF51x processors */
#include <defBF51x_base.h>
#ifdef _MISRA_RULES
#pragma diag(push)
#pragma diag(suppress:misra_rule_19_4:"macros violate rule 19.4")
#endif /* _MISRA_RULES */
/* The following are the #defines needed by ADSP-BF514 that are not in the common header */
/* RSI Registers */
#define RSI_PWR_CONTROL 0xFFC03800 /* RSI Power Control Register */
/* legacy register name (below) provided for backwards code compatibility */
#define SDH_PWR_CTL RSI_PWR_CONTROL /* SDH Power Control */
#define RSI_CLK_CONTROL 0xFFC03804 /* RSI Clock Control Register */
/* legacy register name (below) provided for backwards code compatibility */
#define SDH_CLK_CTL RSI_CLK_CONTROL /* SDH Clock Control */
#define RSI_ARGUMENT 0xFFC03808 /* RSI Argument Register */
/* legacy register name (below) provided for backwards code compatibility */
#define SDH_ARGUMENT RSI_ARGUMENT /* SDH Argument */
#define RSI_COMMAND 0xFFC0380C /* RSI Command Register */
/* legacy register name (below) provided for backwards code compatibility */
#define SDH_COMMAND RSI_COMMAND /* SDH Command */
#define RSI_RESP_CMD 0xFFC03810 /* RSI Response Command Register */
/* legacy register name (below) provided for backwards code compatibility */
#define SDH_RESP_CMD RSI_RESP_CMD /* SDH Response Command */
#define RSI_RESPONSE0 0xFFC03814 /* RSI Response Register */
/* legacy register name (below) provided for backwards code compatibility */
#define SDH_RESPONSE0 RSI_RESPONSE0 /* SDH Response0 */
#define RSI_RESPONSE1 0xFFC03818 /* RSI Response Register */
/* legacy register name (below) provided for backwards code compatibility */
#define SDH_RESPONSE1 RSI_RESPONSE1 /* SDH Response1 */
#define RSI_RESPONSE2 0xFFC0381C /* RSI Response Register */
/* legacy register name (below) provided for backwards code compatibility */
#define SDH_RESPONSE2 RSI_RESPONSE2 /* SDH Response2 */
#define RSI_RESPONSE3 0xFFC03820 /* RSI Response Register */
/* legacy register name (below) provided for backwards code compatibility */
#define SDH_RESPONSE3 RSI_RESPONSE3 /* SDH Response3 */
#define RSI_DATA_TIMER 0xFFC03824 /* RSI Data Timer Register */
/* legacy register name (below) provided for backwards code compatibility */
#define SDH_DATA_TIMER RSI_DATA_TIMER /* SDH Data Timer */
#define RSI_DATA_LGTH 0xFFC03828 /* RSI Data Length Register */
/* legacy register name (below) provided for backwards code compatibility */
#define SDH_DATA_LGTH RSI_DATA_LGTH /* SDH Data Length */
#define RSI_DATA_CONTROL 0xFFC0382C /* RSI Data Control Register */
/* legacy register name (below) provided for backwards code compatibility */
#define SDH_DATA_CTL RSI_DATA_CONTROL /* SDH Data Control */
#define RSI_DATA_CNT 0xFFC03830 /* RSI Data Counter Register */
/* legacy register name (below) provided for backwards code compatibility */
#define SDH_DATA_CNT RSI_DATA_CNT /* SDH Data Counter */
#define RSI_STATUS 0xFFC03834 /* RSI Status Register */
/* legacy register name (below) provided for backwards code compatibility */
#define SDH_STATUS RSI_STATUS /* SDH Status */
#define RSI_STATUSCL 0xFFC03838 /* RSI Status Clear Register */
/* legacy register name (below) provided for backwards code compatibility */
#define SDH_STATUS_CLR RSI_STATUSCL /* SDH Status Clear */
#define RSI_MASK0 0xFFC0383C /* RSI Interrupt 0 Mask Register */
/* legacy register name (below) provided for backwards code compatibility */
#define SDH_MASK0 RSI_MASK0 /* SDH Interrupt0 Mask */
#define RSI_MASK1 0xFFC03840 /* RSI Interrupt 1 Mask Register */
/* legacy register name (below) provided for backwards code compatibility */
#define SDH_MASK1 RSI_MASK1 /* SDH Interrupt1 Mask */
#define RSI_FIFO_CNT 0xFFC03848 /* RSI FIFO Counter Register */
/* legacy register name (below) provided for backwards code compatibility */
#define SDH_FIFO_CNT RSI_FIFO_CNT /* SDH FIFO Counter */
#define RSI_CEATA_CONTROL 0xFFC0384C /* RSI CEATA Register */
#define RSI_FIFO 0xFFC03880 /* RSI Data FIFO Register */
/* legacy register name (below) provided for backwards code compatibility */
#define SDH_FIFO RSI_FIFO /* SDH Data FIFO */
#define RSI_ESTAT 0xFFC038C0 /* RSI Exception Status Register */
/* legacy register name (below) provided for backwards code compatibility */
#define SDH_E_STATUS RSI_ESTAT /* SDH Exception Status */
#define RSI_EMASK 0xFFC038C4 /* RSI Exception Mask Register */
/* legacy register name (below) provided for backwards code compatibility */
#define SDH_E_MASK RSI_EMASK /* SDH Exception Mask */
#define RSI_CONFIG 0xFFC038C8 /* RSI Configuration Register */
/* legacy register name (below) provided for backwards code compatibility */
#define SDH_CFG RSI_CONFIG /* SDH Configuration */
#define RSI_RD_WAIT_EN 0xFFC038CC /* RSI Read Wait Enable Register */
/* legacy register name (below) provided for backwards code compatibility */
#define SDH_RD_WAIT_EN RSI_RD_WAIT_EN /* SDH Read Wait Enable */
#define RSI_PID0 0xFFC038D0 /* RSI Peripheral ID Register 0 */
/* legacy register name (below) provided for backwards code compatibility */
#define SDH_PID0 RSI_PID0 /* SDH Peripheral Identification0 */
#define RSI_PID1 0xFFC038D4 /* RSI Peripheral ID Register 1 */
/* legacy register name (below) provided for backwards code compatibility */
#define SDH_PID1 RSI_PID1 /* SDH Peripheral Identification1 */
#define RSI_PID2 0xFFC038D8 /* RSI Peripheral ID Register 2 */
/* legacy register name (below) provided for backwards code compatibility */
#define SDH_PID2 RSI_PID2 /* SDH Peripheral Identification2 */
#define RSI_PID3 0xFFC038DC /* RSI Peripheral ID Register 3 */
/* legacy register name (below) provided for backwards code compatibility */
#define SDH_PID3 RSI_PID3 /* SDH Peripheral Identification3 */
/* RSI Registers */
/* ********************************************************** */
/* SINGLE BIT MACRO PAIRS (bit mask and negated one) */
/* and MULTI BIT READ MACROS */
/* ********************************************************** */
/* Bit masks for RSI_PWR_CONTROL */
#define PWR_ON 0x3 /* Power On */
#define RSI_CMD_OD 0x40 /* Open Drain Output */
/* legacy bit mask (below) provided for backwards code compatibility */
#define SD_CMD_OD RSI_CMD_OD /* Open Drain Output */
/* legacy bit mask (below) provided for backwards code compatibility */
#define nSD_CMD_OD 0x0
/* legacy bit mask (below) provided for backwards code compatibility */
#if 0
#define TBD 0x3c /* TBD */
#endif
/* legacy bit mask (below) provided for backwards code compatibility */
#define ROD_CTL 0x80
/* legacy bit mask (below) provided for backwards code compatibility */
#define nROD_CTL 0x80
/* Bit masks for RSI_CLK_CONTROL */
#define CLKDIV 0xff /* MC_CLK Divisor */
#define CLK_EN 0x100 /* MC_CLK Bus Clock Enable */
/* legacy bit mask (below) provided for backwards code compatibility */
#define CLK_E CLK_EN /* MC_CLK Bus Clock Enable */
/* legacy bit mask (below) provided for backwards code compatibility */
#define nCLK_E 0x0
#define PWR_SV_EN 0x200 /* Power Save Enable */
/* legacy bit mask (below) provided for backwards code compatibility */
#define PWR_SV_E PWR_SV_EN /* Power Save Enable */
/* legacy bit mask (below) provided for backwards code compatibility */
#define nPWR_SV_E 0x0
#define CLKDIV_BYPASS 0x400 /* Bypass Divisor */
/* legacy bit mask (below) provided for backwards code compatibility */
#define nCLKDIV_BYPASS 0x0
#define BUS_MODE 0x1800 /* Bus width selection */
/* legacy bit mask (below) provided for backwards code compatibility */
#define WIDE_BUS 0x0800 /* Wide Bus Mode Enable */
/* legacy bit mask (below) provided for backwards code compatibility */
#define nWIDE_BUS 0x0
/* Bit masks for RSI_COMMAND */
#define CMD_IDX 0x3f /* Command Index */
#define CMD_RSP_EN 0x40 /* Response */
/* legacy bit mask (below) provided for backwards code compatibility */
#define CMD_RSP CMD_RSP_EN /* Response */
/* legacy bit mask (below) provided for backwards code compatibility */
#define nCMD_RSP 0x0
#define CMD_LRSP_EN 0x80 /* Long Response */
/* legacy bit mask (below) provided for backwards code compatibility */
#define CMD_L_RSP CMD_LRSP_EN /* Long Response */
/* legacy bit mask (below) provided for backwards code compatibility */
#define nCMD_L_RSP 0x0
#define CMD_INT_EN 0x100 /* Command Interrupt */
/* legacy bit mask (below) provided for backwards code compatibility */
#define CMD_INT_E CMD_INT_EN /* Command Interrupt */
/* legacy bit mask (below) provided for backwards code compatibility */
#define nCMD_INT_E 0x0
#define CMD_PEND_EN 0x200 /* Command Pending */
/* legacy bit mask (below) provided for backwards code compatibility */
#define CMD_PEND_E CMD_PEND_EN /* Command Pending */
/* legacy bit mask (below) provided for backwards code compatibility */
#define nCMD_PEND_E 0x0
#define CMD_EN 0x400 /* Command Enable */
/* legacy bit mask (below) provided for backwards code compatibility */
#define CMD_E CMD_EN /* Command Enable */
/* legacy bit mask (below) provided for backwards code compatibility */
#define nCMD_E 0x0
/* Bit masks for RSI_RESP_CMD */
#define RESP_CMD 0x3f /* Response Command */
/* Bit masks for RSI_DATA_LGTH */
#define DATA_LENGTH 0xffff /* Data Length */
/* Bit masks for RSI_DATA_CONTROL */
#define DATA_EN 0x1 /* Data Transfer Enable */
/* legacy bit mask (below) provided for backwards code compatibility */
#define DTX_E DATA_EN /* Data Transfer Enable */
/* legacy bit mask (below) provided for backwards code compatibility */
#define nDTX_E 0x0
#define DATA_DIR 0x2 /* Data Transfer Direction */
/* legacy bit mask (below) provided for backwards code compatibility */
#define DTX_DIR DATA_DIR /* Data Transfer Direction */
/* legacy bit mask (below) provided for backwards code compatibility */
#define nDTX_DIR 0x0
#define DATA_MODE 0x4 /* Data Transfer Mode */
/* legacy bit mask (below) provided for backwards code compatibility */
#define DTX_MODE DATA_MODE /* Data Transfer Mode */
/* legacy bit mask (below) provided for backwards code compatibility */
#define nDTX_MODE 0x0
#define DATA_DMA_EN 0x8 /* Data Transfer DMA Enable */
/* legacy bit mask (below) provided for backwards code compatibility */
#define DTX_DMA_E 0x8 /* Data Transfer DMA Enable */
/* legacy bit mask (below) provided for backwards code compatibility */
#define nDTX_DMA_E 0x0
#define DATA_BLK_LGTH 0xf0 /* Data Transfer Block Length */
/* legacy bit mask (below) provided for backwards code compatibility */
#define DTX_BLK_LGTH 0xf0 /* Data Transfer Block Length */
#define CEATA_EN 0x100 /* CE-ATA operation mode enable */
#define CEATA_CCS_EN 0x200 /* CE-ATA CCS mode enable */
/* Bit masks for RSI_DATA_CNT */
#define DATA_COUNT 0xffff /* Data Count */
/* Bit masks for RSI_STATUS */
#define CMD_CRC_FAIL 0x1 /* CMD CRC Fail */
/* legacy bit mask (below) provided for backwards code compatibility */
#define nCMD_CRC_FAIL 0x0
#define DAT_CRC_FAIL 0x2 /* Data CRC Fail */
/* legacy bit mask (below) provided for backwards code compatibility */
#define nDAT_CRC_FAIL 0x0
#define CMD_TIMEOUT 0x4 /* CMD Time Out */
/* legacy bit mask (below) provided for backwards code compatibility */
#define nCMD_TIMEOUT 0x0
#define DAT_TIMEOUT 0x8 /* Data Time Out */
/* legacy bit mask (below) provided for backwards code compatibility */
#define nDAT_TIMEOUT 0x0
#define TX_UNDERRUN 0x10 /* Transmit Underrun */
/* legacy bit mask (below) provided for backwards code compatibility */
#define nTX_UNDERRUN 0x0
#define RX_OVERRUN 0x20 /* Receive Overrun */
/* legacy bit mask (below) provided for backwards code compatibility */
#define nRX_OVERRUN 0x0
#define CMD_RESP_END 0x40 /* CMD Response End */
/* legacy bit mask (below) provided for backwards code compatibility */
#define nCMD_RESP_END 0x0
#define CMD_SENT 0x80 /* CMD Sent */
/* legacy bit mask (below) provided for backwards code compatibility */
#define nCMD_SENT 0x0
#define DAT_END 0x100 /* Data End */
/* legacy bit mask (below) provided for backwards code compatibility */
#define nDAT_END 0x0
#define START_BIT_ERR 0x200 /* Start Bit Error */
/* legacy bit mask (below) provided for backwards code compatibility */
#define nSTART_BIT_ERR 0x0
#define DAT_BLK_END 0x400 /* Data Block End */
/* legacy bit mask (below) provided for backwards code compatibility */
#define nDAT_BLK_END 0x0
#define CMD_ACT 0x800 /* CMD Active */
/* legacy bit mask (below) provided for backwards code compatibility */
#define nCMD_ACT 0x0
#define TX_ACT 0x1000 /* Transmit Active */
/* legacy bit mask (below) provided for backwards code compatibility */
#define nTX_ACT 0x0
#define RX_ACT 0x2000 /* Receive Active */
/* legacy bit mask (below) provided for backwards code compatibility */
#define nRX_ACT 0x0
#define TX_FIFO_STAT 0x4000 /* Transmit FIFO Status */
/* legacy bit mask (below) provided for backwards code compatibility */
#define nTX_FIFO_STAT 0x0
#define RX_FIFO_STAT 0x8000 /* Receive FIFO Status */
/* legacy bit mask (below) provided for backwards code compatibility */
#define nRX_FIFO_STAT 0x0
#define TX_FIFO_FULL 0x10000 /* Transmit FIFO Full */
/* legacy bit mask (below) provided for backwards code compatibility */
#define nTX_FIFO_FULL 0x0
#define RX_FIFO_FULL 0x20000 /* Receive FIFO Full */
/* legacy bit mask (below) provided for backwards code compatibility */
#define nRX_FIFO_FULL 0x0
#define TX_FIFO_ZERO 0x40000 /* Transmit FIFO Empty */
/* legacy bit mask (below) provided for backwards code compatibility */
#define nTX_FIFO_ZERO 0x0
#define RX_DAT_ZERO 0x80000 /* Receive FIFO Empty */
/* legacy bit mask (below) provided for backwards code compatibility */
#define nRX_DAT_ZERO 0x0
#define TX_DAT_RDY 0x100000 /* Transmit Data Available */
/* legacy bit mask (below) provided for backwards code compatibility */
#define nTX_DAT_RDY 0x0
#define RX_FIFO_RDY 0x200000 /* Receive Data Available */
/* legacy bit mask (below) provided for backwards code compatibility */
#define nRX_FIFO_RDY 0x0
/* Bit masks for RSI_STATCL */
#define CMD_CRC_FAIL_STAT 0x1 /* CMD CRC Fail Status */
/* legacy bit mask (below) provided for backwards code compatibility */
#define nCMD_CRC_FAIL_STAT 0x0
#define DAT_CRC_FAIL_STAT 0x2 /* Data CRC Fail Status */
/* legacy bit mask (below) provided for backwards code compatibility */
#define nDAT_CRC_FAIL_STAT 0x0
#define CMD_TIMEOUT_STAT 0x4 /* CMD Time Out Status */
/* legacy bit mask (below) provided for backwards code compatibility */
#define nCMD_TIMEOUT_STAT 0x0
#define DAT_TIMEOUT_STAT 0x8 /* Data Time Out status */
/* legacy bit mask (below) provided for backwards code compatibility */
#define nDAT_TIMEOUT_STAT 0x0
#define TX_UNDERRUN_STAT 0x10 /* Transmit Underrun Status */
/* legacy bit mask (below) provided for backwards code compatibility */
#define nTX_UNDERRUN_STAT 0x0
#define RX_OVERRUN_STAT 0x20 /* Receive Overrun Status */
/* legacy bit mask (below) provided for backwards code compatibility */
#define nRX_OVERRUN_STAT 0x0
#define CMD_RESP_END_STAT 0x40 /* CMD Response End Status */
/* legacy bit mask (below) provided for backwards code compatibility */
#define nCMD_RESP_END_STAT 0x0
#define CMD_SENT_STAT 0x80 /* CMD Sent Status */
/* legacy bit mask (below) provided for backwards code compatibility */
#define nCMD_SENT_STAT 0x0
#define DAT_END_STAT 0x100 /* Data End Status */
/* legacy bit mask (below) provided for backwards code compatibility */
#define nDAT_END_STAT 0x0
#define START_BIT_ERR_STAT 0x200 /* Start Bit Error Status */
/* legacy bit mask (below) provided for backwards code compatibility */
#define nSTART_BIT_ERR_STAT 0x0
#define DAT_BLK_END_STAT 0x400 /* Data Block End Status */
/* legacy bit mask (below) provided for backwards code compatibility */
#define nDAT_BLK_END_STAT 0x0
/* Bit masks for RSI_MASKx */
#define CMD_CRC_FAIL_MASK 0x1 /* CMD CRC Fail Mask */
/* legacy bit mask (below) provided for backwards code compatibility */
#define nCMD_CRC_FAIL_MASK 0x0
#define DAT_CRC_FAIL_MASK 0x2 /* Data CRC Fail Mask */
/* legacy bit mask (below) provided for backwards code compatibility */
#define nDAT_CRC_FAIL_MASK 0x0
#define CMD_TIMEOUT_MASK 0x4 /* CMD Time Out Mask */
/* legacy bit mask (below) provided for backwards code compatibility */
#define nCMD_TIMEOUT_MASK 0x0
#define DAT_TIMEOUT_MASK 0x8 /* Data Time Out Mask */
/* legacy bit mask (below) provided for backwards code compatibility */
#define nDAT_TIMEOUT_MASK 0x0
#define TX_UNDERRUN_MASK 0x10 /* Transmit Underrun Mask */
/* legacy bit mask (below) provided for backwards code compatibility */
#define nTX_UNDERRUN_MASK 0x0
#define RX_OVERRUN_MASK 0x20 /* Receive Overrun Mask */
/* legacy bit mask (below) provided for backwards code compatibility */
#define nRX_OVERRUN_MASK 0x0
#define CMD_RESP_END_MASK 0x40 /* CMD Response End Mask */
/* legacy bit mask (below) provided for backwards code compatibility */
#define nCMD_RESP_END_MASK 0x0
#define CMD_SENT_MASK 0x80 /* CMD Sent Mask */
/* legacy bit mask (below) provided for backwards code compatibility */
#define nCMD_SENT_MASK 0x0
#define DAT_END_MASK 0x100 /* Data End Mask */
/* legacy bit mask (below) provided for backwards code compatibility */
#define nDAT_END_MASK 0x0
#define START_BIT_ERR_MASK 0x200 /* Start Bit Error Mask */
/* legacy bit mask (below) provided for backwards code compatibility */
#define nSTART_BIT_ERR_MASK 0x0
#define DAT_BLK_END_MASK 0x400 /* Data Block End Mask */
/* legacy bit mask (below) provided for backwards code compatibility */
#define nDAT_BLK_END_MASK 0x0
#define CMD_ACT_MASK 0x800 /* CMD Active Mask */
/* legacy bit mask (below) provided for backwards code compatibility */
#define nCMD_ACT_MASK 0x0
#define TX_ACT_MASK 0x1000 /* Transmit Active Mask */
/* legacy bit mask (below) provided for backwards code compatibility */
#define nTX_ACT_MASK 0x0
#define RX_ACT_MASK 0x2000 /* Receive Active Mask */
/* legacy bit mask (below) provided for backwards code compatibility */
#define nRX_ACT_MASK 0x0
#define TX_FIFO_STAT_MASK 0x4000 /* Transmit FIFO Status Mask */
/* legacy bit mask (below) provided for backwards code compatibility */
#define nTX_FIFO_STAT_MASK 0x0
#define RX_FIFO_STAT_MASK 0x8000 /* Receive FIFO Status Mask */
/* legacy bit mask (below) provided for backwards code compatibility */
#define nRX_FIFO_STAT_MASK 0x0
#define TX_FIFO_FULL_MASK 0x10000 /* Transmit FIFO Full Mask */
/* legacy bit mask (below) provided for backwards code compatibility */
#define nTX_FIFO_FULL_MASK 0x0
#define RX_FIFO_FULL_MASK 0x20000 /* Receive FIFO Full Mask */
/* legacy bit mask (below) provided for backwards code compatibility */
#define nRX_FIFO_FULL_MASK 0x0
#define TX_FIFO_ZERO_MASK 0x40000 /* Transmit FIFO Empty Mask */
/* legacy bit mask (below) provided for backwards code compatibility */
#define nTX_FIFO_ZERO_MASK 0x0
#define RX_DAT_ZERO_MASK 0x80000 /* Receive FIFO Empty Mask */
/* legacy bit mask (below) provided for backwards code compatibility */
#define nRX_DAT_ZERO_MASK 0x0
#define TX_DAT_RDY_MASK 0x100000 /* Transmit Data Available Mask */
/* legacy bit mask (below) provided for backwards code compatibility */
#define nTX_DAT_RDY_MASK 0x0
#define RX_FIFO_RDY_MASK 0x200000 /* Receive Data Available Mask */
/* legacy bit mask (below) provided for backwards code compatibility */
#define nRX_FIFO_RDY_MASK 0x0
/* Bit masks for RSI_FIFO_CNT */
#define FIFO_COUNT 0x7fff /* FIFO Count */
/* Bit masks for RSI_CEATA_CONTROL */
#define CEATA_TX_CCSD 0x1 /* Send CE-ATA CCSD sequence */
/* Bit masks for RSI_ESTAT */
#define SDIO_INT_DET 0x2 /* SDIO Int Detected */
/* legacy bit mask (below) provided for backwards code compatibility */
#define nSDIO_INT_DET 0x0
#define SD_CARD_DET 0x10 /* SD Card Detect */
/* legacy bit mask (below) provided for backwards code compatibility */
#define nSD_CARD_DET 0x0
#define CEATA_INT_DET 0x20
/* Bit masks for RSI_EMASK */
#define SDIO_INT_DET_MASK 0x2 /* Mask SDIO Int Detected */
/* legacy bit mask (below) provided for backwards code compatibility */
#define SDIO_MSK SDIO_INT_DET_MASK /* Mask SDIO Int Detected */
/* legacy bit mask (below) provided for backwards code compatibility */
#define nSDIO_MSK 0x0
#define SD_CARD_DET_MASK 0x10 /* Mask Card Detect */
/* legacy bit mask (below) provided for backwards code compatibility */
#define SCD_MASK SD_CARD_DET_MASK /* Mask Card Detect */
/* legacy bit mask (below) provided for backwards code compatibility */
#define nSCD_MSK 0x0
#define CEATA_INT_DET_MASK 0x20
/* Bit masks for RSI_CFG */
/* Left in for backwards compatibility */
#define RSI_CLK_EN 0x1
/* legacy bit mask (below) provided for backwards code compatibility */
#define CLKS_EN RSI_CLK_EN /* Clocks Enable */
/* legacy bit mask (below) provided for backwards code compatibility */
#define nCLKS_EN 0x0
#define SDIO4_EN 0x4 /* SDIO 4-Bit Enable */
/* legacy bit mask (below) provided for backwards code compatibility */
#define SD4E SDIO4_EN /* SDIO 4-Bit Enable */
/* legacy bit mask (below) provided for backwards code compatibility */
#define nSD4E 0x0
#define MW_EN 0x8 /* Moving Window Enable */
/* legacy bit mask (below) provided for backwards code compatibility */
#define MWE MW_EN /* Moving Window Enable */
/* legacy bit mask (below) provided for backwards code compatibility */
#define nMWE 0x0
#define RSI_RST 0x10 /* SDMMC Reset */
/* legacy bit mask (below) provided for backwards code compatibility */
#define SD_RST RSI_RST /* SDMMC Reset */
/* legacy bit mask (below) provided for backwards code compatibility */
#define nSD_RST 0x0
#define PU_DAT 0x20 /* Pull-up SD_DAT */
/* legacy bit mask (below) provided for backwards code compatibility */
#define PUP_SDDAT PU_DAT /* Pull-up SD_DAT */
/* legacy bit mask (below) provided for backwards code compatibility */
#define nPUP_SDDAT 0x0
#define PU_DAT3 0x40 /* Pull-up SD_DAT3 */
/* legacy bit mask (below) provided for backwards code compatibility */
#define PUP_SDDAT3 PU_DAT3 /* Pull-up SD_DAT3 */
/* legacy bit mask (below) provided for backwards code compatibility */
#define nPUP_SDDAT3 0x0
#define PD_DAT3 0x80 /* Pull-down SD_DAT3 */
/* legacy bit mask (below) provided for backwards code compatibility */
#define PD_SDDAT3 PD_DAT3 /* Pull-down SD_DAT3 */
/* legacy bit mask (below) provided for backwards code compatibility */
#define nPD_SDDAT3 0x0
/* Bit masks for RSI_RD_WAIT_EN */
#define SDIO_RWR 0x1 /* Read Wait Request */
/* legacy bit mask (below) provided for backwards code compatibility */
#define RWR SDIO_RWR /* Read Wait Request */
/* legacy bit mask (below) provided for backwards code compatibility */
#define nRWR 0x0
/* Bit masks for RSI_PIDx */
#define RSI_PID 0xff /* RSI Peripheral ID */
#ifdef _MISRA_RULES
#pragma diag(pop)
#endif /* _MISRA_RULES */
#endif /* _DEF_BF514_H */