newlib/Makefile.tpl
Alexandre Oliva 3127effc67 Introduce @unless/@endunless and postbootstrap Makefile targets
This patch turns dependencies of non-bootstrap targets on bootstrap
targets for bootstrap builds into dependencies on stage_last.  This
arrangement gets stage1-bubble to run from stage_last if we haven't
started a bootstrap yet, and to use the current stage otherwise.  This
was already the case of target libs, just not of non-bootstrapped host
modules.

In order to retain preexisting dependencies in non-bootstrap builds,
or in gcc-less builds, this introduces support for @unless/@endunless
pairs in Makefile.in.

There is a remaining possibility of problem if activating, in a tree
configured for bootstrap, a parallel build of two or more modules, at
least one bootstrapped and one not.  In this case, make might decide
to build stage_current and stage_last in parallel, the latter will
start a submake to build stage1 while the initial make, having
satisfied stage_current, proceeds to build the bootstrapped module in
non-bootstrapped configurations.  The two builds will overlap and will
likely conflict.  This situation does NOT arise in normal settings,
however: a post-bootstrap build of all-host all-target will indeed
activate such targets concurrently, but only after building all
bootstrapped modules successfully, and it will have both stage_last
and stage_current targets already satisfied, so the potential race
between builds will not arise.

Another remaining problem, that is slightly expanded with this patch,
is that of an interrupted build in a tree configured for bootstrap,
continued with a non-bootstrapped target.  Target modules that were
not bootstrapped would already fail to complete the current stage when
activated explicitly in the command line for a retry; host modules,
however, would attempt to build their bootstrapped dependencies, which
is what led to the problem of concurrent builds addressed with this
patch.  An interrupted or failed build might still recover correctly,
if the non-bootstrapped target is activated in both builds, because
then make will remove stage_last when its build command is
interrupted, so that it will attempt to recreate it with stage1-bubble
in the second try.  A bootstrap build, however, will not be attempting
to build stage_last, so the file will remain and the retry won't go
through stage1-bubble.  We have lived with that for target modules, so
we can probably live with that for host modules too.

Another undesirable consequence of this change is that non-boostrapped
host modules, in a tree configured for bootstrap, when activated as
make all-<module>, will build all of stage1 instead of only the
module's usual dependencies.  This is intentional and necessary to fix
the parallel-build problem.  If it's not desirable, disabling the
unnecessary bootstrap configuration will suffice to restore the
original set of dependencies.

for  ChangeLog

	* configure.ac: Introduce support for @unless/@endunless.
	* Makefile.tpl (dep-kind): Rewrite with cond; return
	postbootstrap in some cases.
	(make-postboot-dep, postboot-targets): New.
	(dependencies): Do not output postbootstrap dependencies at
	first.  Output non-target ones changed for configure to depend
	on stage_last @if gcc-bootstrap, and the original deps @unless
	gcc-bootstrap.
	* configure.in, Makefile.in: Rebuilt.
2018-06-30 00:12:40 -03:00

1988 lines
70 KiB
Smarty

[+ AutoGen5 template -*- Mode: Makefile -*-
in
+]
# Makefile.in is generated from Makefile.tpl by 'autogen Makefile.def'.
#
# Makefile for directory with subdirs to build.
# Copyright (C) 1990, 1991, 1992, 1993, 1994, 1995, 1996, 1997, 1998,
# 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011
# Free Software Foundation
#
# This file is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation; either version 3 of the License, or
# (at your option) any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program; see the file COPYING3. If not see
# <http://www.gnu.org/licenses/>.
#
# First, test for a proper version of make, but only where one is required.
@if gcc
ifeq (,$(.VARIABLES)) # The variable .VARIABLES, new with 3.80, is never empty.
$(error GNU make version 3.80 or newer is required.)
endif
@endif gcc
# -------------------------------
# Standard Autoconf-set variables
# -------------------------------
VPATH=@srcdir@
build_alias=@build_noncanonical@
build_vendor=@build_vendor@
build_os=@build_os@
build=@build@
host_alias=@host_noncanonical@
host_vendor=@host_vendor@
host_os=@host_os@
host=@host@
target_alias=@target_noncanonical@
target_vendor=@target_vendor@
target_os=@target_os@
target=@target@
program_transform_name = @program_transform_name@
prefix = @prefix@
exec_prefix = @exec_prefix@
srcdir = @srcdir@
bindir = @bindir@
sbindir = @sbindir@
libexecdir = @libexecdir@
datadir = @datadir@
sysconfdir = @sysconfdir@
sharedstatedir = @sharedstatedir@
localstatedir = @localstatedir@
libdir = @libdir@
includedir = @includedir@
oldincludedir = @oldincludedir@
infodir = @infodir@
datarootdir = @datarootdir@
docdir = @docdir@
pdfdir = @pdfdir@
htmldir = @htmldir@
mandir = @mandir@
man1dir = $(mandir)/man1
man2dir = $(mandir)/man2
man3dir = $(mandir)/man3
man4dir = $(mandir)/man4
man5dir = $(mandir)/man5
man6dir = $(mandir)/man6
man7dir = $(mandir)/man7
man8dir = $(mandir)/man8
man9dir = $(mandir)/man9
INSTALL = @INSTALL@
INSTALL_PROGRAM = @INSTALL_PROGRAM@
INSTALL_SCRIPT = @INSTALL_SCRIPT@
INSTALL_DATA = @INSTALL_DATA@
LN = @LN@
LN_S = @LN_S@
MAINT = @MAINT@
MAINTAINER_MODE_FALSE = @MAINTAINER_MODE_FALSE@
MAINTAINER_MODE_TRUE = @MAINTAINER_MODE_TRUE@
# -------------------------------------------------
# Miscellaneous non-standard autoconf-set variables
# -------------------------------------------------
# The gcc driver likes to know the arguments it was configured with.
TOPLEVEL_CONFIGURE_ARGUMENTS=@TOPLEVEL_CONFIGURE_ARGUMENTS@
tooldir = @tooldir@
build_tooldir = @build_tooldir@
# This is the name of the environment variable used for the path to
# the libraries.
RPATH_ENVVAR = @RPATH_ENVVAR@
# On targets where RPATH_ENVVAR is PATH, a subdirectory of the GCC build path
# is used instead of the directory itself to avoid including built
# executables in PATH.
GCC_SHLIB_SUBDIR = @GCC_SHLIB_SUBDIR@
# Build programs are put under this directory.
BUILD_SUBDIR = @build_subdir@
# This is set by the configure script to the arguments to use when configuring
# directories built for the build system.
BUILD_CONFIGARGS = @build_configargs@ --with-build-subdir="$(BUILD_SUBDIR)"
# Linker flags to use on the host, for stage1 or when not
# bootstrapping.
STAGE1_LDFLAGS = @stage1_ldflags@
# Libraries to use on the host, for stage1 or when not bootstrapping.
STAGE1_LIBS = @stage1_libs@
# Linker flags to use for stage2 and later.
POSTSTAGE1_LDFLAGS = @poststage1_ldflags@
# Libraries to use for stage2 and later.
POSTSTAGE1_LIBS = @poststage1_libs@
# This is the list of variables to export in the environment when
# configuring any subdirectory. It must also be exported whenever
# recursing into a build directory in case that directory's Makefile
# re-runs configure.
BASE_EXPORTS = \
FLEX="$(FLEX)"; export FLEX; \
LEX="$(LEX)"; export LEX; \
BISON="$(BISON)"; export BISON; \
YACC="$(YACC)"; export YACC; \
M4="$(M4)"; export M4; \
SED="$(SED)"; export SED; \
AWK="$(AWK)"; export AWK; \
MAKEINFO="$(MAKEINFO)"; export MAKEINFO;
# This is the list of variables to export in the environment when
# configuring subdirectories for the build system.
BUILD_EXPORTS = \
$(BASE_EXPORTS) \
AR="$(AR_FOR_BUILD)"; export AR; \
AS="$(AS_FOR_BUILD)"; export AS; \
CC="$(CC_FOR_BUILD)"; export CC; \
CFLAGS="$(CFLAGS_FOR_BUILD)"; export CFLAGS; \
CONFIG_SHELL="$(SHELL)"; export CONFIG_SHELL; \
CXX="$(CXX_FOR_BUILD)"; export CXX; \
CXXFLAGS="$(CXXFLAGS_FOR_BUILD)"; export CXXFLAGS; \
GCJ="$(GCJ_FOR_BUILD)"; export GCJ; \
GFORTRAN="$(GFORTRAN_FOR_BUILD)"; export GFORTRAN; \
GOC="$(GOC_FOR_BUILD)"; export GOC; \
GOCFLAGS="$(GOCFLAGS_FOR_BUILD)"; export GOCFLAGS; \
DLLTOOL="$(DLLTOOL_FOR_BUILD)"; export DLLTOOL; \
LD="$(LD_FOR_BUILD)"; export LD; \
LDFLAGS="$(LDFLAGS_FOR_BUILD)"; export LDFLAGS; \
NM="$(NM_FOR_BUILD)"; export NM; \
RANLIB="$(RANLIB_FOR_BUILD)"; export RANLIB; \
WINDRES="$(WINDRES_FOR_BUILD)"; export WINDRES; \
WINDMC="$(WINDMC_FOR_BUILD)"; export WINDMC;
# These variables must be set on the make command line for directories
# built for the build system to override those in BASE_FLAGS_TO_PASS.
EXTRA_BUILD_FLAGS = \
CFLAGS="$(CFLAGS_FOR_BUILD)" \
LDFLAGS="$(LDFLAGS_FOR_BUILD)"
# This is the list of directories to built for the host system.
SUBDIRS = @configdirs@
TARGET_CONFIGDIRS = @target_configdirs@
# This is set by the configure script to the arguments to use when configuring
# directories built for the host system.
HOST_CONFIGARGS = @host_configargs@
# Host programs are put under this directory, which is . except if building
# with srcdir=..
HOST_SUBDIR = @host_subdir@
# This is the list of variables to export in the environment when
# configuring subdirectories for the host system. We need to pass
# some to the GCC configure because of its hybrid host/target nature.
HOST_EXPORTS = \
$(BASE_EXPORTS) \
CC="$(CC)"; export CC; \
ADA_CFLAGS="$(ADA_CFLAGS)"; export ADA_CFLAGS; \
CFLAGS="$(CFLAGS)"; export CFLAGS; \
CONFIG_SHELL="$(SHELL)"; export CONFIG_SHELL; \
CXX="$(CXX)"; export CXX; \
CXXFLAGS="$(CXXFLAGS)"; export CXXFLAGS; \
GCJ="$(GCJ)"; export GCJ; \
GFORTRAN="$(GFORTRAN)"; export GFORTRAN; \
GOC="$(GOC)"; export GOC; \
AR="$(AR)"; export AR; \
AS="$(AS)"; export AS; \
CC_FOR_BUILD="$(CC_FOR_BUILD)"; export CC_FOR_BUILD; \
DLLTOOL="$(DLLTOOL)"; export DLLTOOL; \
LD="$(LD)"; export LD; \
LDFLAGS="$(STAGE1_LDFLAGS) $(LDFLAGS)"; export LDFLAGS; \
NM="$(NM)"; export NM; \
RANLIB="$(RANLIB)"; export RANLIB; \
WINDRES="$(WINDRES)"; export WINDRES; \
WINDMC="$(WINDMC)"; export WINDMC; \
OBJCOPY="$(OBJCOPY)"; export OBJCOPY; \
OBJDUMP="$(OBJDUMP)"; export OBJDUMP; \
READELF="$(READELF)"; export READELF; \
AR_FOR_TARGET="$(AR_FOR_TARGET)"; export AR_FOR_TARGET; \
AS_FOR_TARGET="$(AS_FOR_TARGET)"; export AS_FOR_TARGET; \
GCC_FOR_TARGET="$(GCC_FOR_TARGET)"; export GCC_FOR_TARGET; \
LD_FOR_TARGET="$(LD_FOR_TARGET)"; export LD_FOR_TARGET; \
NM_FOR_TARGET="$(NM_FOR_TARGET)"; export NM_FOR_TARGET; \
OBJDUMP_FOR_TARGET="$(OBJDUMP_FOR_TARGET)"; export OBJDUMP_FOR_TARGET; \
OBJCOPY_FOR_TARGET="$(OBJCOPY_FOR_TARGET)"; export OBJCOPY_FOR_TARGET; \
RANLIB_FOR_TARGET="$(RANLIB_FOR_TARGET)"; export RANLIB_FOR_TARGET; \
READELF_FOR_TARGET="$(READELF_FOR_TARGET)"; export READELF_FOR_TARGET; \
TOPLEVEL_CONFIGURE_ARGUMENTS="$(TOPLEVEL_CONFIGURE_ARGUMENTS)"; export TOPLEVEL_CONFIGURE_ARGUMENTS; \
HOST_LIBS="$(STAGE1_LIBS)"; export HOST_LIBS; \
GMPLIBS="$(HOST_GMPLIBS)"; export GMPLIBS; \
GMPINC="$(HOST_GMPINC)"; export GMPINC; \
ISLLIBS="$(HOST_ISLLIBS)"; export ISLLIBS; \
ISLINC="$(HOST_ISLINC)"; export ISLINC; \
ISLVER="$(HOST_ISLVER)"; export ISLVER; \
LIBELFLIBS="$(HOST_LIBELFLIBS)"; export LIBELFLIBS; \
LIBELFINC="$(HOST_LIBELFINC)"; export LIBELFINC; \
XGCC_FLAGS_FOR_TARGET="$(XGCC_FLAGS_FOR_TARGET)"; export XGCC_FLAGS_FOR_TARGET; \
@if gcc-bootstrap
$(RPATH_ENVVAR)=`echo "$(TARGET_LIB_PATH)$$$(RPATH_ENVVAR)" | sed 's,::*,:,g;s,^:*,,;s,:*$$,,'`; export $(RPATH_ENVVAR); \
@endif gcc-bootstrap
$(RPATH_ENVVAR)=`echo "$(HOST_LIB_PATH)$$$(RPATH_ENVVAR)" | sed 's,::*,:,g;s,^:*,,;s,:*$$,,'`; export $(RPATH_ENVVAR);
POSTSTAGE1_CXX_EXPORT = \
CXX='$(CXX)'; export CXX; \
CXX_FOR_BUILD='$(CXX_FOR_BUILD)'; export CXX_FOR_BUILD;
@if target-libstdc++-v3-bootstrap
# Override the above if we're bootstrapping C++.
POSTSTAGE1_CXX_EXPORT = \
CXX="$(STAGE_CC_WRAPPER) $$r/$(HOST_SUBDIR)/prev-gcc/xg++$(exeext) \
-B$$r/$(HOST_SUBDIR)/prev-gcc/ -B$(build_tooldir)/bin/ -nostdinc++ \
-B$$r/prev-$(TARGET_SUBDIR)/libstdc++-v3/src/.libs \
-B$$r/prev-$(TARGET_SUBDIR)/libstdc++-v3/libsupc++/.libs \
`if $(LEAN); then echo ' -isystem '; else echo ' -I'; fi`$$r/prev-$(TARGET_SUBDIR)/libstdc++-v3/include/$(TARGET_SUBDIR) \
`if $(LEAN); then echo ' -isystem '; else echo ' -I'; fi`$$r/prev-$(TARGET_SUBDIR)/libstdc++-v3/include \
`if $(LEAN); then echo ' -isystem '; else echo ' -I'; fi`$$s/libstdc++-v3/libsupc++ \
-L$$r/prev-$(TARGET_SUBDIR)/libstdc++-v3/src/.libs \
-L$$r/prev-$(TARGET_SUBDIR)/libstdc++-v3/libsupc++/.libs"; \
export CXX; \
CXX_FOR_BUILD="$$CXX"; export CXX_FOR_BUILD;
@endif target-libstdc++-v3-bootstrap
# Similar, for later GCC stages.
POSTSTAGE1_HOST_EXPORTS = \
$(HOST_EXPORTS) \
CC="$(STAGE_CC_WRAPPER) $$r/$(HOST_SUBDIR)/prev-gcc/xgcc$(exeext) \
-B$$r/$(HOST_SUBDIR)/prev-gcc/ -B$(build_tooldir)/bin/ \
$(XGCC_FLAGS_FOR_TARGET) $$TFLAGS"; export CC; \
CC_FOR_BUILD="$$CC"; export CC_FOR_BUILD; \
$(POSTSTAGE1_CXX_EXPORT) \
$(LTO_EXPORTS) \
GNATBIND="$$r/$(HOST_SUBDIR)/prev-gcc/gnatbind"; export GNATBIND; \
LDFLAGS="$(POSTSTAGE1_LDFLAGS) $(BOOT_LDFLAGS)"; export LDFLAGS; \
HOST_LIBS="$(POSTSTAGE1_LIBS)"; export HOST_LIBS;
# Target libraries are put under this directory:
TARGET_SUBDIR = @target_subdir@
# This is set by the configure script to the arguments to use when configuring
# directories built for the target.
TARGET_CONFIGARGS = @target_configargs@ --with-target-subdir="$(TARGET_SUBDIR)"
# This is the list of variables to export in the environment when
# configuring subdirectories for the target system.
BASE_TARGET_EXPORTS = \
$(BASE_EXPORTS) \
AR="$(AR_FOR_TARGET)"; export AR; \
AS="$(COMPILER_AS_FOR_TARGET)"; export AS; \
CC="$(CC_FOR_TARGET) $(XGCC_FLAGS_FOR_TARGET) $$TFLAGS"; export CC; \
CFLAGS="$(CFLAGS_FOR_TARGET)"; export CFLAGS; \
CONFIG_SHELL="$(SHELL)"; export CONFIG_SHELL; \
CPPFLAGS="$(CPPFLAGS_FOR_TARGET)"; export CPPFLAGS; \
CXXFLAGS="$(CXXFLAGS_FOR_TARGET)"; export CXXFLAGS; \
GCJ="$(GCJ_FOR_TARGET) $(XGCC_FLAGS_FOR_TARGET) $$TFLAGS"; export GCJ; \
GFORTRAN="$(GFORTRAN_FOR_TARGET) $(XGCC_FLAGS_FOR_TARGET) $$TFLAGS"; export GFORTRAN; \
GOC="$(GOC_FOR_TARGET) $(XGCC_FLAGS_FOR_TARGET) $$TFLAGS"; export GOC; \
DLLTOOL="$(DLLTOOL_FOR_TARGET)"; export DLLTOOL; \
LD="$(COMPILER_LD_FOR_TARGET)"; export LD; \
LDFLAGS="$(LDFLAGS_FOR_TARGET)"; export LDFLAGS; \
LIPO="$(LIPO_FOR_TARGET)"; export LIPO; \
NM="$(COMPILER_NM_FOR_TARGET)"; export NM; \
OBJDUMP="$(OBJDUMP_FOR_TARGET)"; export OBJDUMP; \
OBJCOPY="$(OBJCOPY_FOR_TARGET)"; export OBJCOPY; \
RANLIB="$(RANLIB_FOR_TARGET)"; export RANLIB; \
READELF="$(READELF_FOR_TARGET)"; export READELF; \
STRIP="$(STRIP_FOR_TARGET)"; export STRIP; \
WINDRES="$(WINDRES_FOR_TARGET)"; export WINDRES; \
WINDMC="$(WINDMC_FOR_TARGET)"; export WINDMC; \
@if gcc-bootstrap
$(RPATH_ENVVAR)=`echo "$(TARGET_LIB_PATH)$$$(RPATH_ENVVAR)" | sed 's,::*,:,g;s,^:*,,;s,:*$$,,'`; export $(RPATH_ENVVAR); \
@endif gcc-bootstrap
$(RPATH_ENVVAR)=`echo "$(HOST_LIB_PATH)$$$(RPATH_ENVVAR)" | sed 's,::*,:,g;s,^:*,,;s,:*$$,,'`; export $(RPATH_ENVVAR); \
TARGET_CONFIGDIRS="$(TARGET_CONFIGDIRS)"; export TARGET_CONFIGDIRS;
RAW_CXX_TARGET_EXPORTS = \
$(BASE_TARGET_EXPORTS) \
CXX_FOR_TARGET="$(RAW_CXX_FOR_TARGET)"; export CXX_FOR_TARGET; \
CXX="$(RAW_CXX_FOR_TARGET) $(XGCC_FLAGS_FOR_TARGET) $$TFLAGS"; export CXX;
NORMAL_TARGET_EXPORTS = \
$(BASE_TARGET_EXPORTS) \
CXX="$(CXX_FOR_TARGET) $(XGCC_FLAGS_FOR_TARGET) $$TFLAGS"; export CXX;
# Where to find GMP
HOST_GMPLIBS = @gmplibs@
HOST_GMPINC = @gmpinc@
# Where to find isl
HOST_ISLLIBS = @isllibs@
HOST_ISLINC = @islinc@
HOST_ISLVER = @islver@
# Where to find libelf
HOST_LIBELFLIBS = @libelflibs@
HOST_LIBELFINC = @libelfinc@
EXTRA_CONFIGARGS_LIBJAVA = @EXTRA_CONFIGARGS_LIBJAVA@
# ----------------------------------------------
# Programs producing files for the BUILD machine
# ----------------------------------------------
SHELL = @SHELL@
# pwd command to use. Allow user to override default by setting PWDCMD in
# the environment to account for automounters. The make variable must not
# be called PWDCMD, otherwise the value set here is passed to make
# subprocesses and overrides the setting from the user's environment.
# Don't use PWD since it is a common shell environment variable and we
# don't want to corrupt it.
PWD_COMMAND = $${PWDCMD-pwd}
# compilers to use to create programs which must be run in the build
# environment.
AR_FOR_BUILD = @AR_FOR_BUILD@
AS_FOR_BUILD = @AS_FOR_BUILD@
CC_FOR_BUILD = @CC_FOR_BUILD@
CFLAGS_FOR_BUILD = @CFLAGS_FOR_BUILD@
CXXFLAGS_FOR_BUILD = @CXXFLAGS_FOR_BUILD@
CXX_FOR_BUILD = @CXX_FOR_BUILD@
DLLTOOL_FOR_BUILD = @DLLTOOL_FOR_BUILD@
GCJ_FOR_BUILD = @GCJ_FOR_BUILD@
GFORTRAN_FOR_BUILD = @GFORTRAN_FOR_BUILD@
GOC_FOR_BUILD = @GOC_FOR_BUILD@
LDFLAGS_FOR_BUILD = @LDFLAGS_FOR_BUILD@
LD_FOR_BUILD = @LD_FOR_BUILD@
NM_FOR_BUILD = @NM_FOR_BUILD@
RANLIB_FOR_BUILD = @RANLIB_FOR_BUILD@
WINDMC_FOR_BUILD = @WINDMC_FOR_BUILD@
WINDRES_FOR_BUILD = @WINDRES_FOR_BUILD@
# Special variables passed down in EXTRA_GCC_FLAGS. They are defined
# here so that they can be overridden by Makefile fragments.
BUILD_PREFIX = @BUILD_PREFIX@
BUILD_PREFIX_1 = @BUILD_PREFIX_1@
# Flags to pass to stage2 and later makes. They are defined
# here so that they can be overridden by Makefile fragments.
BOOT_CFLAGS= -g -O2
BOOT_LDFLAGS=
BOOT_ADAFLAGS= -gnatpg
AWK = @AWK@
SED = @SED@
BISON = @BISON@
YACC = @YACC@
FLEX = @FLEX@
LEX = @LEX@
M4 = @M4@
MAKEINFO = @MAKEINFO@
EXPECT = @EXPECT@
RUNTEST = @RUNTEST@
AUTO_PROFILE = gcc-auto-profile -c 1000000
# This just becomes part of the MAKEINFO definition passed down to
# sub-makes. It lets flags be given on the command line while still
# using the makeinfo from the object tree.
# (Default to avoid splitting info files by setting the threshold high.)
MAKEINFOFLAGS = --split-size=5000000
# ---------------------------------------------
# Programs producing files for the HOST machine
# ---------------------------------------------
AS = @AS@
AR = @AR@
AR_FLAGS = rc
CC = @CC@
CXX = @CXX@
DLLTOOL = @DLLTOOL@
LD = @LD@
LIPO = @LIPO@
NM = @NM@
OBJCOPY = @OBJCOPY@
OBJDUMP = @OBJDUMP@
RANLIB = @RANLIB@
READELF = @READELF@
STRIP = @STRIP@
WINDRES = @WINDRES@
WINDMC = @WINDMC@
GNATBIND = @GNATBIND@
GNATMAKE = @GNATMAKE@
CFLAGS = @CFLAGS@
LDFLAGS = @LDFLAGS@
LIBCFLAGS = $(CFLAGS)
CXXFLAGS = @CXXFLAGS@
LIBCXXFLAGS = $(CXXFLAGS) -fno-implicit-templates
GOCFLAGS = $(CFLAGS)
CREATE_GCOV = create_gcov
TFLAGS =
# Defaults for all stages; some are overridden below.
STAGE_CFLAGS = $(BOOT_CFLAGS)
STAGE_TFLAGS = $(TFLAGS)
STAGE_CONFIGURE_FLAGS=@stage2_werror_flag@
[+ FOR bootstrap-stage +]
# Defaults for stage [+id+]; some are overridden below.
STAGE[+id+]_CFLAGS = $(STAGE_CFLAGS)
STAGE[+id+]_CXXFLAGS = $(CXXFLAGS)
@if target-libstdc++-v3-bootstrap
# Override the above if we're bootstrapping C++.
STAGE[+id+]_CXXFLAGS = $(STAGE[+id+]_CFLAGS)
@endif target-libstdc++-v3-bootstrap
STAGE[+id+]_TFLAGS = $(STAGE_TFLAGS)
STAGE[+id+]_CONFIGURE_FLAGS = $(STAGE_CONFIGURE_FLAGS)
[+ ENDFOR bootstrap-stage +]
# By default, C and C++ are the only stage1 languages, because they are the
# only ones we require to build with the bootstrap compiler, and also the
# only ones useful for building stage2.
STAGE1_CFLAGS = @stage1_cflags@
STAGE1_CHECKING = @stage1_checking@
STAGE1_LANGUAGES = @stage1_languages@
# * We force-disable intermodule optimizations, even if
# --enable-intermodule was passed, since the installed compiler
# probably can't handle them. Luckily, autoconf always respects
# the last argument when conflicting --enable arguments are passed.
# * Likewise, we force-disable coverage flags, since the installed
# compiler probably has never heard of them.
# * We also disable -Wformat, since older GCCs don't understand newer %s.
STAGE1_CONFIGURE_FLAGS = --disable-intermodule $(STAGE1_CHECKING) \
--disable-coverage --enable-languages="$(STAGE1_LANGUAGES)" \
--disable-build-format-warnings
STAGEprofile_CFLAGS = $(STAGE2_CFLAGS) -fprofile-generate
STAGEprofile_TFLAGS = $(STAGE2_TFLAGS)
STAGEfeedback_CFLAGS = $(STAGE3_CFLAGS) -fprofile-use
STAGEfeedback_TFLAGS = $(STAGE3_TFLAGS)
STAGEautoprofile_CFLAGS = $(STAGE2_CFLAGS) -g
STAGEautoprofile_TFLAGS = $(STAGE2_TFLAGS)
STAGEautofeedback_CFLAGS = $(STAGE3_CFLAGS)
STAGEautofeedback_TFLAGS = $(STAGE3_TFLAGS)
do-compare = @do_compare@
do-compare3 = $(do-compare)
# -----------------------------------------------
# Programs producing files for the TARGET machine
# -----------------------------------------------
AR_FOR_TARGET=@AR_FOR_TARGET@
AS_FOR_TARGET=@AS_FOR_TARGET@
CC_FOR_TARGET=$(STAGE_CC_WRAPPER) @CC_FOR_TARGET@
# If GCC_FOR_TARGET is not overriden on the command line, then this
# variable is passed down to the gcc Makefile, where it is used to
# build libgcc2.a. We define it here so that it can itself be
# overridden on the command line.
GCC_FOR_TARGET=$(STAGE_CC_WRAPPER) @GCC_FOR_TARGET@
CXX_FOR_TARGET=$(STAGE_CC_WRAPPER) @CXX_FOR_TARGET@
RAW_CXX_FOR_TARGET=$(STAGE_CC_WRAPPER) @RAW_CXX_FOR_TARGET@
GCJ_FOR_TARGET=$(STAGE_CC_WRAPPER) @GCJ_FOR_TARGET@
GFORTRAN_FOR_TARGET=$(STAGE_CC_WRAPPER) @GFORTRAN_FOR_TARGET@
GOC_FOR_TARGET=$(STAGE_CC_WRAPPER) @GOC_FOR_TARGET@
DLLTOOL_FOR_TARGET=@DLLTOOL_FOR_TARGET@
LD_FOR_TARGET=@LD_FOR_TARGET@
LIPO_FOR_TARGET=@LIPO_FOR_TARGET@
NM_FOR_TARGET=@NM_FOR_TARGET@
OBJDUMP_FOR_TARGET=@OBJDUMP_FOR_TARGET@
OBJCOPY_FOR_TARGET=@OBJCOPY_FOR_TARGET@
RANLIB_FOR_TARGET=@RANLIB_FOR_TARGET@
READELF_FOR_TARGET=@READELF_FOR_TARGET@
STRIP_FOR_TARGET=@STRIP_FOR_TARGET@
WINDRES_FOR_TARGET=@WINDRES_FOR_TARGET@
WINDMC_FOR_TARGET=@WINDMC_FOR_TARGET@
COMPILER_AS_FOR_TARGET=@COMPILER_AS_FOR_TARGET@
COMPILER_LD_FOR_TARGET=@COMPILER_LD_FOR_TARGET@
COMPILER_NM_FOR_TARGET=@COMPILER_NM_FOR_TARGET@
CFLAGS_FOR_TARGET = @CFLAGS_FOR_TARGET@
CXXFLAGS_FOR_TARGET = @CXXFLAGS_FOR_TARGET@
LIBCFLAGS_FOR_TARGET = $(CFLAGS_FOR_TARGET)
LIBCXXFLAGS_FOR_TARGET = $(CXXFLAGS_FOR_TARGET) -fno-implicit-templates
LDFLAGS_FOR_TARGET = @LDFLAGS_FOR_TARGET@
GOCFLAGS_FOR_TARGET = -O2 -g
FLAGS_FOR_TARGET = @FLAGS_FOR_TARGET@
SYSROOT_CFLAGS_FOR_TARGET = @SYSROOT_CFLAGS_FOR_TARGET@
DEBUG_PREFIX_CFLAGS_FOR_TARGET = @DEBUG_PREFIX_CFLAGS_FOR_TARGET@
XGCC_FLAGS_FOR_TARGET = $(FLAGS_FOR_TARGET) $(SYSROOT_CFLAGS_FOR_TARGET) $(DEBUG_PREFIX_CFLAGS_FOR_TARGET)
# ------------------------------------
# Miscellaneous targets and flag lists
# ------------------------------------
# The first rule in the file had better be this one. Don't put any above it.
# This lives here to allow makefile fragments to contain dependencies.
all:
#### host and target specific makefile fragments come in here.
@target_makefile_frag@
@alphaieee_frag@
@ospace_frag@
@host_makefile_frag@
###
# This is the list of directories that may be needed in RPATH_ENVVAR
# so that programs built for the target machine work.
TARGET_LIB_PATH = [+ FOR target_modules +][+
IF lib_path +]$(TARGET_LIB_PATH_[+module+])[+ ENDIF lib_path +][+
ENDFOR target_modules +]$(HOST_LIB_PATH_gcc)
[+ FOR target_modules +][+ IF lib_path +]
@if target-[+module+]
TARGET_LIB_PATH_[+module+] = $$r/$(TARGET_SUBDIR)/[+module+]/[+lib_path+]:
@endif target-[+module+]
[+ ENDIF lib_path +][+ ENDFOR target_modules +]
# This is the list of directories that may be needed in RPATH_ENVVAR
# so that programs built for the host machine work.
HOST_LIB_PATH = [+ FOR host_modules +][+
IF lib_path +]$(HOST_LIB_PATH_[+module+])[+ ENDIF lib_path +][+
ENDFOR host_modules +]
# Define HOST_LIB_PATH_gcc here, for the sake of TARGET_LIB_PATH, ouch
@if gcc
HOST_LIB_PATH_gcc = $$r/$(HOST_SUBDIR)/gcc$(GCC_SHLIB_SUBDIR):$$r/$(HOST_SUBDIR)/prev-gcc$(GCC_SHLIB_SUBDIR):
@endif gcc
[+ FOR host_modules +][+ IF lib_path +]
@if [+module+]
HOST_LIB_PATH_[+module+] = \
$$r/$(HOST_SUBDIR)/[+module+]/[+lib_path+]:[+ IF bootstrap
+]$$r/$(HOST_SUBDIR)/prev-[+module+]/[+lib_path+]:[+ ENDIF bootstrap +]
@endif [+module+]
[+ ENDIF lib_path +][+ ENDFOR host_modules +]
CXX_FOR_TARGET_FLAG_TO_PASS = \
"CXX_FOR_TARGET=$(CXX_FOR_TARGET)"
@if target-libstdc++-v3
# CXX_FOR_TARGET is tricky to get right for target libs that require a
# functional C++ compiler. When we recurse, if we expand
# CXX_FOR_TARGET before configuring libstdc++-v3, we won't get
# libstdc++ include flags from the script. Instead, we get an
# -funconfigured-* word, so that we'll get errors if this invalid C++
# command line is used for anything, but also so that we can use the
# word to decide whether or not to pass on this CXX_FOR_TARGET. If we
# don't pass it on, sub-make will use the default definition, that
# re-expands it at the time of use, so we'll get it right when we need
# it. One potential exception is the expansion of CXX_FOR_TARGET
# passed down as part of CXX within TARGET_FLAGS, but this wouldn't
# really work, for C++ host programs can't depend on the current-stage
# C++ target library.
CXX_FOR_TARGET_FLAG_TO_PASS = \
$(shell if echo "$(CXX_FOR_TARGET)" | grep " -funconfigured-" > /dev/null; then :; else echo '"CXX_FOR_TARGET=$(CXX_FOR_TARGET)"'; fi)
@endif target-libstdc++-v3
# Flags to pass down to all sub-makes. STAGE*FLAGS,
# MAKEINFO and MAKEINFOFLAGS are explicitly passed here to make them
# overrideable (for a bootstrap build stage1 also builds gcc.info).
BASE_FLAGS_TO_PASS =[+ FOR flags_to_pass +][+ IF optional +] \
"`echo '[+flag+]=$([+flag+])' | sed -e s'/[^=][^=]*=$$/XFOO=/'`"[+ ELSE optional +] \
"[+flag+]=$([+flag+])"[+ ENDIF optional+][+ ENDFOR flags_to_pass +][+ FOR bootstrap-stage +] \
"STAGE[+id+]_CFLAGS=$(STAGE[+id+]_CFLAGS)" \
"STAGE[+id+]_CXXFLAGS=$(STAGE[+id+]_CXXFLAGS)" \
"STAGE[+id+]_TFLAGS=$(STAGE[+id+]_TFLAGS)"[+ ENDFOR bootstrap-stage +] \
$(CXX_FOR_TARGET_FLAG_TO_PASS) \
"TFLAGS=$(TFLAGS)" \
"CONFIG_SHELL=$(SHELL)" \
"MAKEINFO=$(MAKEINFO) $(MAKEINFOFLAGS)" \
$(if $(LSAN_OPTIONS),"LSAN_OPTIONS=$(LSAN_OPTIONS)")
# We leave this in just in case, but it is not needed anymore.
RECURSE_FLAGS_TO_PASS = $(BASE_FLAGS_TO_PASS)
# Flags to pass down to most sub-makes, in which we're building with
# the host environment.
EXTRA_HOST_FLAGS = \
'AR=$(AR)' \
'AS=$(AS)' \
'CC=$(CC)' \
'CXX=$(CXX)' \
'DLLTOOL=$(DLLTOOL)' \
'GCJ=$(GCJ)' \
'GFORTRAN=$(GFORTRAN)' \
'GOC=$(GOC)' \
'LD=$(LD)' \
'LIPO=$(LIPO)' \
'NM=$(NM)' \
'OBJDUMP=$(OBJDUMP)' \
'RANLIB=$(RANLIB)' \
'READELF=$(READELF)' \
'STRIP=$(STRIP)' \
'WINDRES=$(WINDRES)' \
'WINDMC=$(WINDMC)' \
'CREATE_GCOV=$(CREATE_GCOV)'
FLAGS_TO_PASS = $(BASE_FLAGS_TO_PASS) $(EXTRA_HOST_FLAGS)
# Flags to pass to stage1 or when not bootstrapping.
STAGE1_FLAGS_TO_PASS = \
LDFLAGS="$${LDFLAGS}" \
HOST_LIBS="$${HOST_LIBS}"
# Flags to pass to stage2 and later makes.
POSTSTAGE1_FLAGS_TO_PASS = \
CC="$${CC}" CC_FOR_BUILD="$${CC_FOR_BUILD}" \
CXX="$${CXX}" CXX_FOR_BUILD="$${CXX_FOR_BUILD}" \
GNATBIND="$${GNATBIND}" \
LDFLAGS="$${LDFLAGS}" \
HOST_LIBS="$${HOST_LIBS}" \
$(LTO_FLAGS_TO_PASS) \
"`echo 'ADAFLAGS=$(BOOT_ADAFLAGS)' | sed -e s'/[^=][^=]*=$$/XFOO=/'`"
@if gcc-bootstrap
EXTRA_HOST_EXPORTS = if [ $(current_stage) != stage1 ]; then \
$(POSTSTAGE1_HOST_EXPORTS) \
fi;
EXTRA_BOOTSTRAP_FLAGS = CC="$$CC" CXX="$$CXX" LDFLAGS="$$LDFLAGS"
@endif gcc-bootstrap
# Flags to pass down to makes which are built with the target environment.
# The double $ decreases the length of the command line; those variables
# are set in BASE_FLAGS_TO_PASS, and the sub-make will expand them. The
# *_CFLAGS_FOR_TARGET variables are not passed down and most often empty,
# so we expand them here.
EXTRA_TARGET_FLAGS = \
'AR=$$(AR_FOR_TARGET)' \
'AS=$(COMPILER_AS_FOR_TARGET)' \
'CC=$$(CC_FOR_TARGET) $$(XGCC_FLAGS_FOR_TARGET) $$(TFLAGS)' \
'CFLAGS=$$(CFLAGS_FOR_TARGET)' \
'CXX=$$(CXX_FOR_TARGET) -B$$r/$$(TARGET_SUBDIR)/libstdc++-v3/src/.libs \
-B$$r/$$(TARGET_SUBDIR)/libstdc++-v3/libsupc++/.libs \
$$(XGCC_FLAGS_FOR_TARGET) $$(TFLAGS)' \
'CXXFLAGS=$$(CXXFLAGS_FOR_TARGET)' \
'DLLTOOL=$$(DLLTOOL_FOR_TARGET)' \
'GCJ=$$(GCJ_FOR_TARGET) $$(XGCC_FLAGS_FOR_TARGET) $$(TFLAGS)' \
'GFORTRAN=$$(GFORTRAN_FOR_TARGET) $$(XGCC_FLAGS_FOR_TARGET) $$(TFLAGS)' \
'GOC=$$(GOC_FOR_TARGET) $$(XGCC_FLAGS_FOR_TARGET) $$(TFLAGS)' \
'GOCFLAGS=$$(GOCFLAGS_FOR_TARGET)' \
'LD=$(COMPILER_LD_FOR_TARGET)' \
'LDFLAGS=$$(LDFLAGS_FOR_TARGET)' \
'LIBCFLAGS=$$(LIBCFLAGS_FOR_TARGET)' \
'LIBCXXFLAGS=$$(LIBCXXFLAGS_FOR_TARGET)' \
'NM=$(COMPILER_NM_FOR_TARGET)' \
'OBJDUMP=$$(OBJDUMP_FOR_TARGET)' \
'OBJCOPY=$$(OBJCOPY_FOR_TARGET)' \
'RANLIB=$$(RANLIB_FOR_TARGET)' \
'READELF=$$(READELF_FOR_TARGET)' \
'WINDRES=$$(WINDRES_FOR_TARGET)' \
'WINDMC=$$(WINDMC_FOR_TARGET)' \
'XGCC_FLAGS_FOR_TARGET=$(XGCC_FLAGS_FOR_TARGET)' \
'STAGE1_LDFLAGS=$$(POSTSTAGE1_LDFLAGS)' \
'STAGE1_LIBS=$$(POSTSTAGE1_LIBS)' \
"TFLAGS=$$TFLAGS"
TARGET_FLAGS_TO_PASS = $(BASE_FLAGS_TO_PASS) $(EXTRA_TARGET_FLAGS)
# Flags to pass down to gcc. gcc builds a library, libgcc.a, so it
# unfortunately needs the native compiler and the target ar and
# ranlib.
# If any variables are added here, they must be added to do-*, below.
# The BUILD_* variables are a special case, which are used for the gcc
# cross-building scheme.
EXTRA_GCC_FLAGS = \
"GCC_FOR_TARGET=$(GCC_FOR_TARGET)" \
"`echo 'STMP_FIXPROTO=$(STMP_FIXPROTO)' | sed -e s'/[^=][^=]*=$$/XFOO=/'`" \
"`echo 'LIMITS_H_TEST=$(LIMITS_H_TEST)' | sed -e s'/[^=][^=]*=$$/XFOO=/'`"
GCC_FLAGS_TO_PASS = $(BASE_FLAGS_TO_PASS) $(EXTRA_HOST_FLAGS) $(EXTRA_GCC_FLAGS)
@if gcc
BUILD_CONFIG = @BUILD_CONFIG@
ifneq ($(BUILD_CONFIG),)
include $(foreach CONFIG, $(BUILD_CONFIG), $(srcdir)/config/$(CONFIG).mk)
endif
@endif gcc
.PHONY: configure-host
configure-host: [+
FOR host_modules +] \
maybe-configure-[+module+][+
ENDFOR host_modules +]
.PHONY: configure-target
configure-target: [+
FOR target_modules +] \
maybe-configure-target-[+module+][+
ENDFOR target_modules +]
# The target built for a native non-bootstrap build.
.PHONY: all
all:
@if gcc-bootstrap
[ -f stage_final ] || echo stage3 > stage_final
@r=`${PWD_COMMAND}`; export r; \
s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \
$(MAKE) $(RECURSE_FLAGS_TO_PASS) `cat stage_final`-bubble
@endif gcc-bootstrap
@: $(MAKE); $(unstage)
@r=`${PWD_COMMAND}`; export r; \
s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \
@if gcc-bootstrap
if [ -f stage_last ]; then \
TFLAGS="$(STAGE$(shell test ! -f stage_last || sed s,^stage,, stage_last)_TFLAGS)"; \
$(MAKE) $(TARGET_FLAGS_TO_PASS) all-host all-target; \
else \
@endif gcc-bootstrap
$(MAKE) $(RECURSE_FLAGS_TO_PASS) all-host all-target \
@if gcc-bootstrap
; \
fi \
@endif gcc-bootstrap
&& :
.PHONY: all-build
[+ FOR build_modules +]
all-build: maybe-all-build-[+module+][+ ENDFOR build_modules +]
.PHONY: all-host
[+ FOR host_modules +][+ IF bootstrap +]
@if [+module+]-no-bootstrap[+ ENDIF bootstrap +]
all-host: maybe-all-[+module+][+ IF bootstrap +]
@endif [+module+]-no-bootstrap[+ ENDIF bootstrap +][+ ENDFOR host_modules +]
.PHONY: all-target
[+ FOR target_modules +][+ IF bootstrap +]
@if target-[+module+]-no-bootstrap[+ ENDIF bootstrap +]
all-target: maybe-all-target-[+module+][+ IF bootstrap +]
@endif target-[+module+]-no-bootstrap[+
ENDIF bootstrap +][+ ENDFOR target_modules +]
# Do a target for all the subdirectories. A ``make do-X'' will do a
# ``make X'' in all subdirectories (because, in general, there is a
# dependency (below) of X upon do-X, a ``make X'' will also do this,
# but it may do additional work as well).
[+ FOR recursive_targets +]
.PHONY: do-[+make_target+]
do-[+make_target+]:
@: $(MAKE); $(unstage)
@r=`${PWD_COMMAND}`; export r; \
s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \
$(MAKE) $(RECURSE_FLAGS_TO_PASS) [+make_target+]-host \
[+make_target+]-target
.PHONY: [+make_target+]-host
[+ FOR host_modules +]
[+make_target+]-host: maybe-[+make_target+]-[+module+][+ ENDFOR host_modules +]
.PHONY: [+make_target+]-target
[+ FOR target_modules +]
[+make_target+]-target: maybe-[+make_target+]-target-[+module+][+ ENDFOR target_modules +]
[+ ENDFOR recursive_targets +]
# Here are the targets which correspond to the do-X targets.
.PHONY: info installcheck dvi pdf html
.PHONY: install-info install-pdf install-html
.PHONY: clean distclean mostlyclean maintainer-clean realclean
.PHONY: local-clean local-distclean local-maintainer-clean
info: do-info
installcheck: do-installcheck
dvi: do-dvi
pdf: do-pdf
html: do-html
# Make sure makeinfo is built before we do a `make info', if we're
# in fact building texinfo.
do-info: maybe-all-texinfo
install-info: do-install-info dir.info
s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \
if [ -f dir.info ]; then \
$(INSTALL_DATA) dir.info $(DESTDIR)$(infodir)/dir.info; \
else true; fi
install-pdf: do-install-pdf
install-html: do-install-html
local-clean:
-rm -f *.a TEMP errs core *.o *~ \#* TAGS *.E *.log
local-distclean:
-rm -f Makefile config.status config.cache mh-frag mt-frag
-rm -f maybedep.tmp serdep.tmp stage_final
-if [ "$(TARGET_SUBDIR)" != "." ]; then \
rm -rf $(TARGET_SUBDIR); \
else true; fi
-rm -rf $(BUILD_SUBDIR)
-if [ "$(HOST_SUBDIR)" != "." ]; then \
rm -rf $(HOST_SUBDIR); \
else true; fi
-rm -f texinfo/po/Makefile texinfo/po/Makefile.in texinfo/info/Makefile
-rm -f texinfo/doc/Makefile texinfo/po/POTFILES
-rmdir texinfo/doc texinfo/info texinfo/intl texinfo/lib 2>/dev/null
-rmdir texinfo/makeinfo texinfo/po texinfo/util 2>/dev/null
-rmdir fastjar gcc gnattools gotools libcc1 libiberty 2>/dev/null
-rmdir texinfo zlib 2>/dev/null
-find . -name config.cache -exec rm -f {} \; \; 2>/dev/null
local-maintainer-clean:
@echo "This command is intended for maintainers to use;"
@echo "it deletes files that may require special tools to rebuild."
clean: do-clean local-clean
mostlyclean: do-mostlyclean local-clean
distclean: do-distclean local-clean local-distclean
maintainer-clean: local-maintainer-clean do-maintainer-clean local-clean
maintainer-clean: local-distclean
realclean: maintainer-clean
# Check target.
.PHONY: check do-check
check: do-check
# Only include modules actually being configured and built.
.PHONY: check-host
check-host: [+
FOR host_modules +] \
maybe-check-[+module+][+
ENDFOR host_modules +]
.PHONY: check-target
check-target: [+
FOR target_modules +] \
maybe-check-target-[+module+][+
ENDFOR target_modules +]
do-check:
@: $(MAKE); $(unstage)
@r=`${PWD_COMMAND}`; export r; \
s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \
$(MAKE) $(RECURSE_FLAGS_TO_PASS) check-host check-target
# Automated reporting of test results.
warning.log: build.log
$(srcdir)/contrib/warn_summary build.log > $@
mail-report.log:
if test x'$(BOOT_CFLAGS)' != x''; then \
BOOT_CFLAGS='$(BOOT_CFLAGS)'; export BOOT_CFLAGS; \
fi; \
$(srcdir)/contrib/test_summary -t >$@
chmod +x $@
echo If you really want to send e-mail, run ./$@ now
mail-report-with-warnings.log: warning.log
if test x'$(BOOT_CFLAGS)' != x''; then \
BOOT_CFLAGS='$(BOOT_CFLAGS)'; export BOOT_CFLAGS; \
fi; \
$(srcdir)/contrib/test_summary -t -i warning.log >$@
chmod +x $@
echo If you really want to send e-mail, run ./$@ now
# Local Vim config
$(srcdir)/.local.vimrc:
$(LN_S) contrib/vimrc $@
$(srcdir)/.lvimrc:
$(LN_S) contrib/vimrc $@
vimrc: $(srcdir)/.local.vimrc $(srcdir)/.lvimrc
.PHONY: vimrc
# clang-format config
$(srcdir)/.clang-format:
$(LN_S) contrib/clang-format $@
clang-format: $(srcdir)/.clang-format
.PHONY: clang-format
# Installation targets.
.PHONY: install uninstall
install:
@: $(MAKE); $(unstage)
@r=`${PWD_COMMAND}`; export r; \
s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \
$(MAKE) $(RECURSE_FLAGS_TO_PASS) installdirs install-host install-target
.PHONY: install-host-nogcc
install-host-nogcc: [+
FOR host_modules +][+ IF (not (= (get "module") "gcc")) +] \
maybe-install-[+module+][+ ENDIF +][+
ENDFOR host_modules +]
.PHONY: install-host
install-host: [+
FOR host_modules +] \
maybe-install-[+module+][+
ENDFOR host_modules +]
.PHONY: install-target
install-target: [+
FOR target_modules +] \
maybe-install-target-[+module+][+
ENDFOR target_modules +]
uninstall:
@echo "the uninstall target is not supported in this tree"
.PHONY: install.all
install.all: install-no-fixedincludes
@if [ -f ./gcc/Makefile ]; then \
r=`${PWD_COMMAND}`; export r; \
s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \
$(HOST_EXPORTS) \
(cd ./gcc && \
$(MAKE) $(FLAGS_TO_PASS) install-headers); \
else \
true; \
fi
# install-no-fixedincludes is used to allow the elaboration of binary packages
# suitable for distribution, where we cannot include the fixed system header
# files.
.PHONY: install-no-fixedincludes
install-no-fixedincludes: installdirs install-host-nogcc \
install-target gcc-install-no-fixedincludes
.PHONY: install-strip
install-strip:
@: $(MAKE); $(unstage)
@r=`${PWD_COMMAND}`; export r; \
s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \
$(MAKE) $(RECURSE_FLAGS_TO_PASS) installdirs install-strip-host install-strip-target
.PHONY: install-strip-host
install-strip-host: [+
FOR host_modules +] \
maybe-install-strip-[+module+][+
ENDFOR host_modules +]
.PHONY: install-strip-target
install-strip-target: [+
FOR target_modules +] \
maybe-install-strip-target-[+module+][+
ENDFOR target_modules +]
### other supporting targets
MAKEDIRS= \
$(DESTDIR)$(prefix) \
$(DESTDIR)$(exec_prefix)
.PHONY: installdirs
installdirs: mkinstalldirs
$(SHELL) $(srcdir)/mkinstalldirs $(MAKEDIRS)
dir.info: do-install-info
if [ -f $(srcdir)/texinfo/gen-info-dir ]; then \
$(srcdir)/texinfo/gen-info-dir $(DESTDIR)$(infodir) $(srcdir)/texinfo/dir.info-template > dir.info.new; \
mv -f dir.info.new dir.info; \
else true; \
fi
dist:
@echo "Building a full distribution of this tree isn't done"
@echo "via 'make dist'. Check out the etc/ subdirectory"
etags tags: TAGS
# Right now this just builds TAGS in each subdirectory. emacs19 has the
# ability to use several tags files at once, so there is probably no need
# to combine them into one big TAGS file (like CVS 1.3 does). We could
# (if we felt like it) have this Makefile write a piece of elisp which
# the user could load to tell emacs19 where all the TAGS files we just
# built are.
TAGS: do-TAGS
# ------------------------------------
# Macros for configure and all targets
# ------------------------------------
[+ DEFINE configure +]
.PHONY: configure-[+prefix+][+module+] maybe-configure-[+prefix+][+module+]
maybe-configure-[+prefix+][+module+]:
@if gcc-bootstrap
configure-[+prefix+][+module+]: stage_current
@endif gcc-bootstrap
@if [+prefix+][+module+]
maybe-configure-[+prefix+][+module+]: configure-[+prefix+][+module+]
configure-[+prefix+][+module+]: [+ IF bootstrap +][+ ELSE +]
@: $(MAKE); $(unstage)[+ ENDIF bootstrap +]
@r=`${PWD_COMMAND}`; export r; \
s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \
[+ IF check_multilibs
+]echo "Checking multilib configuration for [+module+]..."; \
$(SHELL) $(srcdir)/mkinstalldirs [+subdir+]/[+module+]; \
$(CC_FOR_TARGET) --print-multi-lib > [+subdir+]/[+module+]/multilib.tmp 2> /dev/null; \
if test -r [+subdir+]/[+module+]/multilib.out; then \
if cmp -s [+subdir+]/[+module+]/multilib.tmp [+subdir+]/[+module+]/multilib.out; then \
rm -f [+subdir+]/[+module+]/multilib.tmp; \
else \
rm -f [+subdir+]/[+module+]/Makefile; \
mv [+subdir+]/[+module+]/multilib.tmp [+subdir+]/[+module+]/multilib.out; \
fi; \
else \
mv [+subdir+]/[+module+]/multilib.tmp [+subdir+]/[+module+]/multilib.out; \
fi; \
[+ ENDIF check_multilibs +]test ! -f [+subdir+]/[+module+]/Makefile || exit 0; \
$(SHELL) $(srcdir)/mkinstalldirs [+subdir+]/[+module+]; \
[+exports+] [+extra_exports+] \
echo Configuring in [+subdir+]/[+module+]; \
cd "[+subdir+]/[+module+]" || exit 1; \
case $(srcdir) in \
/* | [A-Za-z]:[\\/]*) topdir=$(srcdir) ;; \
*) topdir=`echo [+subdir+]/[+module+]/ | \
sed -e 's,\./,,g' -e 's,[^/]*/,../,g' `$(srcdir) ;; \
esac; \
module_srcdir=[+? module_srcdir (get "module_srcdir") (get "module")+]; \
[+ IF no-config-site +]rm -f no-such-file || : ; \
CONFIG_SITE=no-such-file [+ ENDIF +]$(SHELL) \
$$s/$$module_srcdir/configure \
--srcdir=$${topdir}/$$module_srcdir \
[+args+] --build=${build_alias} --host=[+host_alias+] \
--target=[+target_alias+] [+extra_configure_flags+] \
|| exit 1
@endif [+prefix+][+module+]
[+ IF bootstrap +]
[+ FOR bootstrap_stage +]
.PHONY: configure-stage[+id+]-[+prefix+][+module+] maybe-configure-stage[+id+]-[+prefix+][+module+]
maybe-configure-stage[+id+]-[+prefix+][+module+]:
@if [+prefix+][+module+]-bootstrap
maybe-configure-stage[+id+]-[+prefix+][+module+]: configure-stage[+id+]-[+prefix+][+module+]
configure-stage[+id+]-[+prefix+][+module+]:
@[ $(current_stage) = stage[+id+] ] || $(MAKE) stage[+id+]-start
@$(SHELL) $(srcdir)/mkinstalldirs [+subdir+]/[+module+]
@r=`${PWD_COMMAND}`; export r; \
s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \
TFLAGS="$(STAGE[+id+]_TFLAGS)"; \
[+ IF check_multilibs
+]echo "Checking multilib configuration for [+module+]..."; \
$(CC_FOR_TARGET) --print-multi-lib > [+subdir+]/[+module+]/multilib.tmp 2> /dev/null; \
if test -r [+subdir+]/[+module+]/multilib.out; then \
if cmp -s [+subdir+]/[+module+]/multilib.tmp [+subdir+]/[+module+]/multilib.out; then \
rm -f [+subdir+]/[+module+]/multilib.tmp; \
else \
rm -f [+subdir+]/[+module+]/Makefile; \
mv [+subdir+]/[+module+]/multilib.tmp [+subdir+]/[+module+]/multilib.out; \
fi; \
else \
mv [+subdir+]/[+module+]/multilib.tmp [+subdir+]/[+module+]/multilib.out; \
fi; \
[+ ENDIF check_multilibs +]test ! -f [+subdir+]/[+module+]/Makefile || exit 0; \
[+exports+][+ IF prev +] \
[+poststage1_exports+][+ ENDIF prev +][+ IF prefix +] \
CFLAGS="$(CFLAGS_FOR_TARGET)"; export CFLAGS; \
CXXFLAGS="$(CXXFLAGS_FOR_TARGET)"; export CXXFLAGS; \
LIBCFLAGS="$(LIBCFLAGS_FOR_TARGET)"; export LIBCFLAGS;[+ ELSE prefix +] \
CFLAGS="$(STAGE[+id+]_CFLAGS)"; export CFLAGS; \
CXXFLAGS="$(STAGE[+id+]_CXXFLAGS)"; export CXXFLAGS;[+ IF prev +] \
LIBCFLAGS="$(STAGE[+id+]_CFLAGS)"[+ ELSE prev +] \
LIBCFLAGS="$(LIBCFLAGS)"[+ ENDIF prev +]; export LIBCFLAGS;[+
ENDIF prefix +] [+extra_exports+] \
echo Configuring stage [+id+] in [+subdir+]/[+module+]; \
$(SHELL) $(srcdir)/mkinstalldirs [+subdir+]/[+module+]; \
cd [+subdir+]/[+module+] || exit 1; \
case $(srcdir) in \
/* | [A-Za-z]:[\\/]*) topdir=$(srcdir) ;; \
*) topdir=`echo [+subdir+]/[+module+]/ | \
sed -e 's,\./,,g' -e 's,[^/]*/,../,g' `$(srcdir) ;; \
esac; \
module_srcdir=[+? module_srcdir (get "module_srcdir") (get "module")+]; \
$(SHELL) $$s/$$module_srcdir/configure \
--srcdir=$${topdir}/$$module_srcdir \
[+args+] --build=${build_alias} --host=[+host_alias+] \
--target=[+target_alias+] \
[+ IF prev +]--with-build-libsubdir=$(HOST_SUBDIR)[+ ENDIF prev +] \
$(STAGE[+id+]_CONFIGURE_FLAGS)[+ IF extra_configure_flags +] \
[+extra_configure_flags+][+ ENDIF extra_configure_flags +]
@endif [+prefix+][+module+]-bootstrap
[+ ENDFOR bootstrap_stage +]
[+ ENDIF bootstrap +]
[+ ENDDEF +]
[+ DEFINE all +]
.PHONY: all-[+prefix+][+module+] maybe-all-[+prefix+][+module+]
maybe-all-[+prefix+][+module+]:
@if gcc-bootstrap
all-[+prefix+][+module+]: stage_current
@endif gcc-bootstrap
@if [+prefix+][+module+]
TARGET-[+prefix+][+module+]=[+
IF all_target +][+all_target+][+ ELSE +]all[+ ENDIF all_target +]
maybe-all-[+prefix+][+module+]: all-[+prefix+][+module+]
all-[+prefix+][+module+]: configure-[+prefix+][+module+][+ IF bootstrap +][+ ELSE +]
@: $(MAKE); $(unstage)[+ ENDIF bootstrap +]
@r=`${PWD_COMMAND}`; export r; \
s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \
[+exports+] [+extra_exports+] \
(cd [+subdir+]/[+module+] && \
$(MAKE) $(BASE_FLAGS_TO_PASS) [+args+] [+stage1_args+] [+extra_make_flags+] \
$(TARGET-[+prefix+][+module+]))
@endif [+prefix+][+module+]
[+ IF bootstrap +]
[+ FOR bootstrap_stage +]
.PHONY: all-stage[+id+]-[+prefix+][+module+] maybe-all-stage[+id+]-[+prefix+][+module+]
.PHONY: clean-stage[+id+]-[+prefix+][+module+] maybe-clean-stage[+id+]-[+prefix+][+module+]
maybe-all-stage[+id+]-[+prefix+][+module+]:
maybe-clean-stage[+id+]-[+prefix+][+module+]:
@if [+prefix+][+module+]-bootstrap
maybe-all-stage[+id+]-[+prefix+][+module+]: all-stage[+id+]-[+prefix+][+module+]
all-stage[+id+]: all-stage[+id+]-[+prefix+][+module+]
TARGET-stage[+id+]-[+prefix+][+module+] = $(TARGET-[+prefix+][+module+])
all-stage[+id+]-[+prefix+][+module+]: configure-stage[+id+]-[+prefix+][+module+]
@[ $(current_stage) = stage[+id+] ] || $(MAKE) stage[+id+]-start
@r=`${PWD_COMMAND}`; export r; \
s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \
TFLAGS="$(STAGE[+id+]_TFLAGS)"; \
[+exports+][+ IF prev +] \
[+poststage1_exports+][+ ENDIF prev +] [+extra_exports+] \
cd [+subdir+]/[+module+] && \
[+autoprofile+] \
$(MAKE) $(BASE_FLAGS_TO_PASS)[+ IF prefix +] \
CFLAGS="$(CFLAGS_FOR_TARGET)" \
CXXFLAGS="$(CXXFLAGS_FOR_TARGET)" \
LIBCFLAGS="$(LIBCFLAGS_FOR_TARGET)"[+ ELSE prefix +] \
CFLAGS="$(STAGE[+id+]_CFLAGS)" \
CXXFLAGS="$(STAGE[+id+]_CXXFLAGS)"[+ IF prev +] \
LIBCFLAGS="$(STAGE[+id+]_CFLAGS)"[+ ELSE prev +] \
LIBCFLAGS="$(LIBCFLAGS)"[+ ENDIF prev +][+ ENDIF prefix +] \
CFLAGS_FOR_TARGET="$(CFLAGS_FOR_TARGET)" \
CXXFLAGS_FOR_TARGET="$(CXXFLAGS_FOR_TARGET)" \
LIBCFLAGS_FOR_TARGET="$(LIBCFLAGS_FOR_TARGET)" \
[+args+] [+IF prev +][+poststage1_args+][+ ELSE prev +] \
[+stage1_args+][+ ENDIF prev +] [+extra_make_flags+] \
TFLAGS="$(STAGE[+id+]_TFLAGS)" [+profile_data+] \
$(TARGET-stage[+id+]-[+prefix+][+module+])
maybe-clean-stage[+id+]-[+prefix+][+module+]: clean-stage[+id+]-[+prefix+][+module+]
clean-stage[+id+]: clean-stage[+id+]-[+prefix+][+module+]
clean-stage[+id+]-[+prefix+][+module+]:
@if [ $(current_stage) = stage[+id+] ]; then \
[ -f [+subdir+]/[+module+]/Makefile ] || exit 0; \
else \
[ -f [+subdir+]/stage[+id+]-[+module+]/Makefile ] || exit 0; \
$(MAKE) stage[+id+]-start; \
fi; \
cd [+subdir+]/[+module+] && \
$(MAKE) [+args+] [+ IF prev +][+poststage1_args+][+ ELSE prev +] \
[+stage1_args+][+ ENDIF prev +] [+extra_make_flags+] clean
@endif [+prefix+][+module+]-bootstrap
[+ ENDFOR bootstrap_stage +]
[+ ENDIF bootstrap +]
[+ ENDDEF +]
# --------------------------------------
# Modules which run on the build machine
# --------------------------------------
[+ FOR build_modules +]
[+ configure prefix="build-" subdir="$(BUILD_SUBDIR)" exports="$(BUILD_EXPORTS)"
host_alias=(get "host" "${build_alias}")
target_alias=(get "target" "${target_alias}")
args="$(BUILD_CONFIGARGS)" no-config-site=true +]
[+ all prefix="build-" subdir="$(BUILD_SUBDIR)" exports="$(BUILD_EXPORTS)"
args="$(EXTRA_BUILD_FLAGS)" +]
[+ ENDFOR build_module +]
# --------------------------------------
# Modules which run on the host machine
# --------------------------------------
[+ FOR host_modules +]
[+ configure prefix="" subdir="$(HOST_SUBDIR)"
exports="$(HOST_EXPORTS)"
poststage1_exports="$(POSTSTAGE1_HOST_EXPORTS)"
host_alias=(get "host" "${host_alias}")
target_alias=(get "target" "${target_alias}")
args="$(HOST_CONFIGARGS)" +]
[+ all prefix="" subdir="$(HOST_SUBDIR)"
exports="$(HOST_EXPORTS)"
poststage1_exports="$(POSTSTAGE1_HOST_EXPORTS)"
args="$(EXTRA_HOST_FLAGS)"
stage1_args="$(STAGE1_FLAGS_TO_PASS)"
poststage1_args="$(POSTSTAGE1_FLAGS_TO_PASS)" +]
.PHONY: check-[+module+] maybe-check-[+module+]
maybe-check-[+module+]:
@if [+module+]
maybe-check-[+module+]: check-[+module+]
[+ IF no_check +]
check-[+module+]:
[+ ELIF no_check_cross +]
# This module is only tested in a native toolchain.
check-[+module+]:
@: $(MAKE); $(unstage)
@if [ '$(host)' = '$(target)' ]; then \
r=`${PWD_COMMAND}`; export r; \
s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \
$(HOST_EXPORTS) [+ IF bootstrap +]$(EXTRA_HOST_EXPORTS)[+
ENDIF bootstrap +] \
(cd $(HOST_SUBDIR)/[+module+] && \
$(MAKE) $(FLAGS_TO_PASS) [+extra_make_flags+][+
IF bootstrap +] $(EXTRA_BOOTSTRAP_FLAGS)[+ ENDIF bootstrap +] check)
fi
[+ ELSE check +]
check-[+module+]:
@: $(MAKE); $(unstage)
@r=`${PWD_COMMAND}`; export r; \
s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \
$(HOST_EXPORTS) [+ IF bootstrap +]$(EXTRA_HOST_EXPORTS)[+
ENDIF bootstrap +] \
(cd $(HOST_SUBDIR)/[+module+] && \
$(MAKE) $(FLAGS_TO_PASS) [+extra_make_flags+][+
IF bootstrap +] $(EXTRA_BOOTSTRAP_FLAGS)[+ ENDIF bootstrap +] check)
[+ ENDIF no_check +]
@endif [+module+]
.PHONY: install-[+module+] maybe-install-[+module+]
maybe-install-[+module+]:
@if [+module+]
maybe-install-[+module+]: install-[+module+]
[+ IF no_install +]
install-[+module+]:
[+ ELSE install +]
install-[+module+]: installdirs
@: $(MAKE); $(unstage)
@r=`${PWD_COMMAND}`; export r; \
s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \
$(HOST_EXPORTS) \
(cd $(HOST_SUBDIR)/[+module+] && \
$(MAKE) $(FLAGS_TO_PASS) [+extra_make_flags+] install)
[+ ENDIF no_install +]
@endif [+module+]
.PHONY: install-strip-[+module+] maybe-install-strip-[+module+]
maybe-install-strip-[+module+]:
@if [+module+]
maybe-install-strip-[+module+]: install-strip-[+module+]
[+ IF no_install +]
install-strip-[+module+]:
[+ ELSE install +]
install-strip-[+module+]: installdirs
@: $(MAKE); $(unstage)
@r=`${PWD_COMMAND}`; export r; \
s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \
$(HOST_EXPORTS) \
(cd $(HOST_SUBDIR)/[+module+] && \
$(MAKE) $(FLAGS_TO_PASS) [+extra_make_flags+] install-strip)
[+ ENDIF no_install +]
@endif [+module+]
# Other targets (info, dvi, pdf, etc.)
[+ FOR recursive_targets +]
.PHONY: maybe-[+make_target+]-[+module+] [+make_target+]-[+module+]
maybe-[+make_target+]-[+module+]:
@if [+module+]
maybe-[+make_target+]-[+module+]: [+make_target+]-[+module+]
[+ IF (match-value? = "missing" (get "make_target") ) +]
# [+module+] doesn't support [+make_target+].
[+make_target+]-[+module+]:
[+ ELSE +]
[+make_target+]-[+module+]: [+
FOR depend +]\
[+depend+]-[+module+] [+
ENDFOR depend +]
@[+ IF bootstrap +][+ ELSE +]: $(MAKE); $(unstage)
@[+ ENDIF bootstrap +][ -f ./[+module+]/Makefile ] || exit 0; \
r=`${PWD_COMMAND}`; export r; \
s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \
$(HOST_EXPORTS) \
for flag in $(EXTRA_HOST_FLAGS) [+extra_make_flags+]; do \
eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \
done; \
echo "Doing [+make_target+] in [+module+]"; \
(cd $(HOST_SUBDIR)/[+module+] && \
$(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \
"CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \
"RANLIB=$${RANLIB}" \
"DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" "WINDMC=$${WINDMC}" \
[+make_target+]) \
|| exit 1
[+ ENDIF +]
@endif [+module+]
[+ ENDFOR recursive_targets +]
[+ ENDFOR host_modules +]
# ---------------------------------------
# Modules which run on the target machine
# ---------------------------------------
[+ FOR target_modules +]
[+ IF raw_cxx +]
[+ configure prefix="target-" subdir="$(TARGET_SUBDIR)"
check_multilibs=true
exports="$(RAW_CXX_TARGET_EXPORTS)"
host_alias=(get "host" "${target_alias}")
target_alias=(get "target" "${target_alias}")
args="$(TARGET_CONFIGARGS)" no-config-site=true +]
[+ all prefix="target-" subdir="$(TARGET_SUBDIR)"
exports="$(RAW_CXX_TARGET_EXPORTS)"
args="$(EXTRA_TARGET_FLAGS) 'CXX=$$(RAW_CXX_FOR_TARGET)' 'CXX_FOR_TARGET=$$(RAW_CXX_FOR_TARGET)'" +]
[+ ELSE +]
[+ configure prefix="target-" subdir="$(TARGET_SUBDIR)"
check_multilibs=true
exports="$(NORMAL_TARGET_EXPORTS)"
host_alias=(get "host" "${target_alias}")
target_alias=(get "target" "${target_alias}")
args="$(TARGET_CONFIGARGS)" no-config-site=true +]
[+ all prefix="target-" subdir="$(TARGET_SUBDIR)"
exports="$(NORMAL_TARGET_EXPORTS)"
args="$(EXTRA_TARGET_FLAGS)" +]
[+ ENDIF +]
.PHONY: check-target-[+module+] maybe-check-target-[+module+]
maybe-check-target-[+module+]:
@if target-[+module+]
maybe-check-target-[+module+]: check-target-[+module+]
[+ IF no_check +]
# Dummy target for uncheckable module.
check-target-[+module+]:
[+ ELSE check +]
check-target-[+module+]:
@: $(MAKE); $(unstage)
@r=`${PWD_COMMAND}`; export r; \
s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \[+
IF raw_cxx +]
$(RAW_CXX_TARGET_EXPORTS) \[+
ELSE normal_cxx +]
$(NORMAL_TARGET_EXPORTS) \[+
ENDIF raw_cxx +]
(cd $(TARGET_SUBDIR)/[+module+] && \
$(MAKE) $(TARGET_FLAGS_TO_PASS) [+
IF raw_cxx
+] 'CXX=$$(RAW_CXX_FOR_TARGET)' 'CXX_FOR_TARGET=$$(RAW_CXX_FOR_TARGET)' [+
ENDIF raw_cxx
+] [+extra_make_flags+] check)
[+ ENDIF no_check +]
@endif target-[+module+]
.PHONY: install-target-[+module+] maybe-install-target-[+module+]
maybe-install-target-[+module+]:
@if target-[+module+]
maybe-install-target-[+module+]: install-target-[+module+]
[+ IF no_install +]
# Dummy target for uninstallable.
install-target-[+module+]:
[+ ELSE install +]
install-target-[+module+]: installdirs
@: $(MAKE); $(unstage)
@r=`${PWD_COMMAND}`; export r; \
s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \[+
IF raw_cxx +]
$(RAW_CXX_TARGET_EXPORTS) \[+
ELSE normal_cxx +]
$(NORMAL_TARGET_EXPORTS) \[+
ENDIF raw_cxx +]
(cd $(TARGET_SUBDIR)/[+module+] && \
$(MAKE) $(TARGET_FLAGS_TO_PASS) [+extra_make_flags+] install)
[+ ENDIF no_install +]
@endif target-[+module+]
.PHONY: install-strip-target-[+module+] maybe-install-strip-target-[+module+]
maybe-install-strip-target-[+module+]:
@if target-[+module+]
maybe-install-strip-target-[+module+]: install-strip-target-[+module+]
[+ IF no_install +]
# Dummy target for uninstallable.
install-strip-target-[+module+]:
[+ ELSE install +]
install-strip-target-[+module+]: installdirs
@: $(MAKE); $(unstage)
@r=`${PWD_COMMAND}`; export r; \
s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \[+
IF raw_cxx +]
$(RAW_CXX_TARGET_EXPORTS) \[+
ELSE normal_cxx +]
$(NORMAL_TARGET_EXPORTS) \[+
ENDIF raw_cxx +]
(cd $(TARGET_SUBDIR)/[+module+] && \
$(MAKE) $(TARGET_FLAGS_TO_PASS) [+extra_make_flags+] install-strip)
[+ ENDIF no_install +]
@endif target-[+module+]
# Other targets (info, dvi, pdf, etc.)
[+ FOR recursive_targets +]
.PHONY: maybe-[+make_target+]-target-[+module+] [+make_target+]-target-[+module+]
maybe-[+make_target+]-target-[+module+]:
@if target-[+module+]
maybe-[+make_target+]-target-[+module+]: [+make_target+]-target-[+module+]
[+ IF (match-value? = "missing" (get "make_target") ) +]
# [+module+] doesn't support [+make_target+].
[+make_target+]-target-[+module+]:
[+ ELSE +]
[+make_target+]-target-[+module+]: [+
FOR depend +]\
[+depend+]-target-[+module+] [+
ENDFOR depend +]
@: $(MAKE); $(unstage)
@[ -f $(TARGET_SUBDIR)/[+module+]/Makefile ] || exit 0; \
r=`${PWD_COMMAND}`; export r; \
s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \[+
IF raw_cxx +]
$(RAW_CXX_TARGET_EXPORTS) \[+
ELSE normal_cxx +]
$(NORMAL_TARGET_EXPORTS) \[+
ENDIF raw_cxx +]
echo "Doing [+make_target+] in $(TARGET_SUBDIR)/[+module+]"; \
for flag in $(EXTRA_TARGET_FLAGS); do \
eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \
done; \
(cd $(TARGET_SUBDIR)/[+module+] && \
$(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \
"CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \
"RANLIB=$${RANLIB}" \
"DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" "WINDMC=$${WINDMC}" \
[+extra_make_flags+] [+make_target+]) \
|| exit 1
[+ ENDIF +]
@endif target-[+module+]
[+ ENDFOR recursive_targets +]
[+ ENDFOR target_modules +]
@if target-libgomp
.PHONY: check-target-libgomp-c++
check-target-libgomp-c++:
$(MAKE) RUNTESTFLAGS="$(RUNTESTFLAGS) c++.exp" check-target-libgomp
@endif target-libgomp
@if target-libitm
.PHONY: check-target-libitm-c++
check-target-libitm-c++:
$(MAKE) RUNTESTFLAGS="$(RUNTESTFLAGS) c++.exp" check-target-libitm
@endif target-libitm
# ----------
# GCC module
# ----------
@if gcc-no-bootstrap
.PHONY: cross
cross: all-build all-gas all-ld
@r=`${PWD_COMMAND}`; export r; \
s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \
$(HOST_EXPORTS) \
echo "Building the C and C++ compiler"; \
cd gcc && $(MAKE) $(GCC_FLAGS_TO_PASS) LANGUAGES="c c++"
@r=`${PWD_COMMAND}`; export r; \
s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \
echo "Building runtime libraries"; \
$(MAKE) $(RECURSE_FLAGS_TO_PASS) LANGUAGES="c c++" all
@endif gcc-no-bootstrap
@if gcc
[+ FOR languages +]
.PHONY: check-gcc-[+language+] check-[+language+]
check-gcc-[+language+]:
r=`${PWD_COMMAND}`; export r; \
s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \
$(HOST_EXPORTS) \
(cd gcc && $(MAKE) $(GCC_FLAGS_TO_PASS) [+gcc-check-target+]);
check-[+language+]: check-gcc-[+language+][+ FOR lib-check-target +] [+ lib-check-target +][+ ENDFOR lib-check-target +]
[+ ENDFOR languages +]
# The gcc part of install-no-fixedincludes, which relies on an intimate
# knowledge of how a number of gcc internal targets (inter)operate. Delegate.
.PHONY: gcc-install-no-fixedincludes
gcc-install-no-fixedincludes:
@if [ -f ./gcc/Makefile ]; then \
r=`${PWD_COMMAND}`; export r; \
s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \
$(HOST_EXPORTS) \
(cd ./gcc \
&& $(MAKE) $(GCC_FLAGS_TO_PASS) install-no-fixedincludes); \
else true; fi
@endif gcc
# ---------------------
# GCC bootstrap support
# ---------------------
# We track the current stage (the one in 'gcc') in the stage_current file.
# stage_last instead tracks the stage that was built last. These targets
# are dummy when toplevel bootstrap is not active.
# While making host and target tools, symlinks to the final stage must be
# there, so $(unstage) should be run at various points. To avoid excessive
# recursive invocations of make, we "inline" them using a variable. These
# must be referenced as ": $(MAKE) ; $(unstage)" rather than "$(unstage)"
# to avoid warnings from the GNU Make job server.
unstage = :
stage = :
current_stage = ""
@if gcc-bootstrap
unstage = if [ -f stage_last ]; then [ -f stage_current ] || $(MAKE) `cat stage_last`-start || exit 1; else :; fi
stage = if [ -f stage_current ]; then $(MAKE) `cat stage_current`-end || exit 1; else :; fi
current_stage = "`cat stage_current 2> /dev/null`"
@endif gcc-bootstrap
.PHONY: unstage stage
unstage:
@: $(MAKE); $(unstage)
stage:
@: $(MAKE); $(stage)
# Disable commands for lean bootstrap.
LEAN = false
# We name the build directories for the various stages "stage1-gcc",
# "stage2-gcc","stage3-gcc", etc.
# Since the 'compare' process will fail (on debugging information) if any
# directory names are different, we need to link the gcc directory for
# the previous stage to a constant name ('prev-gcc'), and to make the name of
# the build directories constant as well. For the latter, we use naked names
# like 'gcc', because the scripts in that directory assume it. We use
# mv on platforms where symlinks to directories do not work or are not
# reliable.
# 'touch' doesn't work right on some platforms.
STAMP = echo timestamp >
# We only want to compare .o files, so set this!
objext = .o
[+ FOR bootstrap-stage +]
.PHONY: stage[+id+]-start stage[+id+]-end
stage[+id+]-start::
@: $(MAKE); $(stage); \
echo stage[+id+] > stage_current; \
echo stage[+id+] > stage_last; \
$(SHELL) $(srcdir)/mkinstalldirs $(HOST_SUBDIR)[+
FOR host_modules +][+ IF bootstrap +]
@if [+ module +]
@cd $(HOST_SUBDIR); [ -d stage[+id+]-[+module+] ] || \
mkdir stage[+id+]-[+module+]; \
mv stage[+id+]-[+module+] [+module+][+ IF prev +]; \
mv stage[+prev+]-[+module+] prev-[+module+] || test -f stage[+prev+]-lean [+ ENDIF prev +]
@endif [+ module +][+ ENDIF bootstrap +][+ ENDFOR host_modules +]
@[ -d stage[+id+]-$(TARGET_SUBDIR) ] || \
mkdir stage[+id+]-$(TARGET_SUBDIR); \
mv stage[+id+]-$(TARGET_SUBDIR) $(TARGET_SUBDIR)[+ IF prev +]; \
mv stage[+prev+]-$(TARGET_SUBDIR) prev-$(TARGET_SUBDIR) || test -f stage[+prev+]-lean [+ ENDIF prev +]
stage[+id+]-end:: [+ FOR host_modules +][+ IF bootstrap +]
@if [+ module +]
@if test -d $(HOST_SUBDIR)/[+module+]; then \
cd $(HOST_SUBDIR); mv [+module+] stage[+id+]-[+module+][+ IF prev +]; \
mv prev-[+module+] stage[+prev+]-[+module+]; : [+ ENDIF prev +]; \
fi
@endif [+ module +][+ ENDIF bootstrap +][+ ENDFOR host_modules +]
@if test -d $(TARGET_SUBDIR); then \
mv $(TARGET_SUBDIR) stage[+id+]-$(TARGET_SUBDIR)[+ IF prev +]; \
mv prev-$(TARGET_SUBDIR) stage[+prev+]-$(TARGET_SUBDIR); : [+ ENDIF prev +]; \
fi
rm -f stage_current
# Bubble a bug fix through all the stages up to stage [+id+]. They are
# remade, but not reconfigured. The next stage (if any) will not be
# reconfigured either.
.PHONY: stage[+id+]-bubble
stage[+id+]-bubble:: [+ IF prev +]stage[+prev+]-bubble[+ ENDIF +]
@r=`${PWD_COMMAND}`; export r; \
s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \
if test -f stage[+id+]-lean [+
IF prev +]|| test -f stage[+prev+]-lean [+ ENDIF prev +]; then \
echo Skipping rebuild of stage[+id+]; \
else \
$(MAKE) stage[+id+]-start; \[+IF lean +]
if $(LEAN); then \
rm -rf stage[+lean+]-*; \
$(STAMP) stage[+lean+]-lean; \
fi; \[+ ENDIF lean +]
$(MAKE) $(RECURSE_FLAGS_TO_PASS) all-stage[+id+]; \
fi[+ IF compare-target +]
$(MAKE) $(RECURSE_FLAGS_TO_PASS) [+compare-target+][+ ENDIF compare-target +]
.PHONY: all-stage[+id+] clean-stage[+id+]
do-clean: clean-stage[+id+]
# FIXME: Will not need to be conditional when toplevel bootstrap is the
# only possibility, but now it conflicts with no-bootstrap rules
@if gcc-bootstrap
[+ IF compare-target +]
[+compare-target+]:
@r=`${PWD_COMMAND}`; export r; \
s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \
if test -f stage[+prev+]-lean; then \
echo Cannot compare object files as stage [+prev+] was deleted.; \
exit 0; \
fi; \
: $(MAKE); $(stage); \
rm -f .bad_compare; \
echo Comparing stages [+prev+] and [+id+]; \
sed=`echo stage[+id+] | sed 's,^stage,,;s,.,.,g'`; \
files=`find stage[+id+]-* -name "*$(objext)" -print | \
sed -n s,^stage$$sed-,,p`; \
for file in $${files}; do \
f1=$$r/stage[+prev+]-$$file; f2=$$r/stage[+id+]-$$file; \
if test ! -f $$f1; then continue; fi; \
$(do-[+compare-target+]) > /dev/null 2>&1; \
if test $$? -eq 1; then \
case $$file in \
@compare_exclusions@) \
echo warning: $$file differs ;; \
*) \
echo $$file differs >> .bad_compare ;; \
esac; \
fi; \
done; \
if [ -f .bad_compare ]; then \
echo "Bootstrap comparison failure!"; \
cat .bad_compare; \
exit 1; \
else \
echo Comparison successful.; \
fi; \
$(STAMP) [+compare-target+][+ IF prev +]
if $(LEAN); then \
rm -rf stage[+prev+]-*; \
$(STAMP) stage[+prev+]-lean; \
fi[+ ENDIF prev +]
[+ ENDIF compare-target +]
[+ IF bootstrap-target +]
.PHONY: [+bootstrap-target+] [+bootstrap-target+]-lean
[+bootstrap-target+]:
echo stage[+id+] > stage_final
@r=`${PWD_COMMAND}`; export r; \
s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \
$(MAKE) $(RECURSE_FLAGS_TO_PASS) stage[+id+]-bubble
@: $(MAKE); $(unstage)
@r=`${PWD_COMMAND}`; export r; \
s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \
TFLAGS="$(STAGE[+id+]_TFLAGS)"; \
$(MAKE) $(TARGET_FLAGS_TO_PASS) all-host all-target
[+bootstrap-target+]-lean:
echo stage[+id+] > stage_final
@r=`${PWD_COMMAND}`; export r; \
s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \
$(MAKE) $(RECURSE_FLAGS_TO_PASS) LEAN=: stage[+id+]-bubble
@: $(MAKE); $(unstage)
@r=`${PWD_COMMAND}`; export r; \
s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \
TFLAGS="$(STAGE[+id+]_TFLAGS)"; \
$(MAKE) $(TARGET_FLAGS_TO_PASS) all-host all-target
[+ ENDIF bootstrap-target +]
# Rules to wipe a stage and all the following ones, also used for cleanstrap
[+ IF prev +]distclean-stage[+prev+]:: distclean-stage[+id+] [+ ENDIF prev +]
.PHONY: distclean-stage[+id+]
distclean-stage[+id+]::
@: $(MAKE); $(stage)
@test "`cat stage_last`" != stage[+id+] || rm -f stage_last
rm -rf stage[+id+]-* [+
IF compare-target +][+compare-target+] [+ ENDIF compare-target +]
[+ IF cleanstrap-target +]
.PHONY: [+cleanstrap-target+]
[+cleanstrap-target+]: do-distclean local-clean
echo stage[+id+] > stage_final
@r=`${PWD_COMMAND}`; export r; \
s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \
$(MAKE) $(RECURSE_FLAGS_TO_PASS) stage[+id+]-bubble
@: $(MAKE); $(unstage)
@r=`${PWD_COMMAND}`; export r; \
s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \
TFLAGS="$(STAGE[+id+]_TFLAGS)"; \
$(MAKE) $(TARGET_FLAGS_TO_PASS) all-host all-target
[+ ENDIF cleanstrap-target +]
@endif gcc-bootstrap
[+ ENDFOR bootstrap-stage +]
stageprofile-end::
$(MAKE) distclean-stagefeedback
stagefeedback-start::
@r=`${PWD_COMMAND}`; export r; \
s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \
for i in prev-*; do \
j=`echo $$i | sed s/^prev-//`; \
cd $$r/$$i && \
{ find . -type d | sort | sed 's,.*,$(SHELL) '"$$s"'/mkinstalldirs "../'$$j'/&",' | $(SHELL); } && \
{ find . -name '*.*da' | sed 's,.*,$(LN) -f "&" "../'$$j'/&",' | $(SHELL); }; \
done
@if gcc-bootstrap
do-distclean: distclean-stage1
# Provide a GCC build when we're building target libraries. This does
# not work as a dependency, just as the minimum necessary to avoid errors.
stage_last:
@r=`${PWD_COMMAND}`; export r; \
s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \
$(MAKE) $(RECURSE_FLAGS_TO_PASS) stage1-bubble
# Same as unstage, but not phony and defaulting to stage1-start. We place
# it in the dependency so that for example `make -j3 all-gcc' works.
stage_current:
@if test -f stage_last; then $(unstage); else $(MAKE) stage1-start; fi
.PHONY: restrap
restrap::
@: $(MAKE); $(stage)
rm -rf stage1-$(TARGET_SUBDIR)[+ FOR bootstrap-stage +][+ IF prev
+] stage[+id+]-*[+ ENDIF prev +][+ ENDFOR bootstrap-stage +]
restrap:: all
@endif gcc-bootstrap
# --------------------------------------
# Dependencies between different modules
# --------------------------------------
# Generic dependencies for target modules on host stuff, especially gcc
@if gcc-bootstrap[+ FOR target_modules +][+ IF bootstrap
+][+ FOR bootstrap_stage +]
configure-stage[+id+]-target-[+module+]: maybe-all-stage[+id+]-gcc[+
ENDFOR +][+ ELSE bootstrap +]
configure-target-[+module+]: stage_last[+
ENDIF bootstrap +][+ ENDFOR target_modules +]
@endif gcc-bootstrap
@if gcc-no-bootstrap[+ FOR target_modules +]
configure-target-[+module+]: maybe-all-gcc[+
ENDFOR target_modules +]
@endif gcc-no-bootstrap
# There are two types of dependencies here: 'hard' dependencies, where one
# module simply won't build without the other; and 'soft' dependencies, where
# if the depended-on module is missing, the depending module will do without
# or find a substitute somewhere (perhaps installed). Soft dependencies
# are made here to depend on a 'maybe-' target. If you're not sure,
# it's safer to use a soft dependency.
[+ ;; These Scheme functions build the bulk of the dependencies.
;; dep-target builds a string like "maybe-all-MODULE_KIND-gcc",
;; where "maybe-" is only included if HARD is not true, and all-gcc
;; is taken from VAR-NAME.
(define dep-target (lambda (module-kind var-name hard)
(string-append
(if hard "" "maybe-")
(dep-subtarget var-name)
module-kind
(dep-module var-name)
)))
;; make-dep builds a dependency from the MODULE and ON AutoGen vars.
(define make-dep (lambda (module-kind on-kind)
(string-append
(dep-target module-kind "module" #t) ": "
(dep-target on-kind "on" (exist? "hard")))))
;; dep-subtarget extracts everything up to the first dash in the given
;; AutoGen variable, for example it extracts "all-" out of "all-gcc".
(define dep-subtarget (lambda (var-name)
(substring (get var-name) 0 (+ 1 (string-index (get var-name) #\-)))))
;; dep-module extracts everything up to the first dash in the given
;; AutoGen variable, for example it extracts "gcc" out of "all-gcc".
(define dep-module (lambda (var-name)
(substring (get var-name) (+ 1 (string-index (get var-name) #\-)))))
;; dep-stage builds a string for the prefix of a bootstrap stage.
(define dep-stage (lambda ()
(string-append
"stage"
(get "id")
"-")))
;; dep-maybe is the same as the AutoGen expression "- hard 'maybe-'"
;; but is written in Scheme.
(define dep-maybe (lambda ()
(if (exist? "hard") "" "maybe-")))
;; dep-kind returns returns "prebootstrap" for configure or build
;; dependencies of bootstrapped modules on a build module
;; (e.g. all-gcc on all-build-bison); "normal" if the dependency is
;; on an "install" target, or if the dependence module is not
;; bootstrapped; otherwise, it returns "bootstrap" or
;; "postbootstrap" depending on whether the dependent module is
;; bootstrapped. All this is only necessary for host and target
;; modules. It might seem like, in order to avoid build races, we
;; might need more elaborate detection between prebootstrap and
;; postbootstrap modules, but there are no host prebootstrap
;; modules. If there were any non-bootstrap host modules that
;; bootstrap modules depended on, we'd get unsatisfied per-stage
;; dependencies on them, which would be immediately noticed.
(define dep-kind (lambda ()
(cond
((and (hash-ref boot-modules (dep-module "module"))
(=* (dep-module "on") "build-"))
"prebootstrap")
((or (= (dep-subtarget "on") "install-")
(not (hash-ref boot-modules (dep-module "on"))))
"normal")
((hash-ref boot-modules (dep-module "module"))
"bootstrap")
(1 "postbootstrap"))))
(define make-postboot-dep (lambda ()
(let ((target (dep-module "module")) (dep "stage_last"))
(unless (= (hash-ref postboot-targets target) dep)
(hash-create-handle! postboot-targets target dep)
;; All non-bootstrap modules' configure target already
;; depend on dep.
(unless (=* target "target-")
(string-append "configure-" target ": " dep "\n"))))))
;; We now build the hash table that is used by dep-kind.
(define boot-modules (make-hash-table 113))
(define postboot-targets (make-hash-table 113))
+]
[+ FOR host_modules +][+
(if (exist? "bootstrap")
(hash-create-handle! boot-modules (get "module") #t))
"" +][+ ENDFOR host_modules +]
[+ FOR target_modules +][+
(if (exist? "bootstrap")
(hash-create-handle! boot-modules (string-append "target-" (get "module")) #t))
"" +][+ ENDFOR target_modules +]
# With all the machinery above in place, it is pretty easy to generate
# dependencies. Host dependencies are a bit more complex because we have
# to check for bootstrap/prebootstrap dependencies. To resolve
# prebootstrap dependencies, prebootstrap modules are gathered in
# a hash table.
[+ FOR dependencies +][+ CASE (dep-kind) +]
[+ == "prebootstrap" +][+ (make-dep "" "") +][+ FOR bootstrap_stage +]
[+ (make-dep (dep-stage) "") +][+ ENDFOR bootstrap_stage +]
[+ == "bootstrap" +][+ (make-dep "" "") +][+ FOR bootstrap_stage +]
[+ (make-dep (dep-stage) (dep-stage)) +][+ ENDFOR bootstrap_stage +]
[+ == "normal" +][+ (make-dep "" "") +]
[+ ESAC +][+ ENDFOR dependencies +]
@if gcc-bootstrap
[+ FOR dependencies +][+ CASE (dep-kind) +]
[+ == "postbootstrap" +][+ (make-postboot-dep) +][+ ESAC +][+
ENDFOR dependencies +]@endif gcc-bootstrap
@unless gcc-bootstrap
[+ FOR dependencies +][+ CASE (dep-kind) +]
[+ == "postbootstrap" +][+ (make-dep "" "") +]
[+ ESAC +][+ ENDFOR dependencies +]@endunless gcc-bootstrap
# Dependencies for target modules on other target modules are
# described by lang_env_dependencies; the defaults apply to anything
# not mentioned there.
[+
;; Predicate for whether LANG was specified in lang_env_dependencies.
(define lang-dep (lambda (lang)
(hash-ref lang-env-deps (string-append (get "module") "-" lang))))
;; Build the hash table we will need.
(define lang-env-deps (make-hash-table 7))
+][+ FOR lang_env_dependencies +][+
(if (exist? "cxx")
(hash-create-handle! lang-env-deps
(string-append (get "module") "-" "cxx") #t))
(if (exist? "no_c")
(hash-create-handle! lang-env-deps
(string-append (get "module") "-" "no_c") #t))
(if (exist? "no_gcc")
(hash-create-handle! lang-env-deps
(string-append (get "module") "-" "no_gcc") #t))
"" +][+ ENDFOR lang_env_dependencies +]
@if gcc-bootstrap[+ FOR target_modules +][+ IF (not (lang-dep "no_gcc"))
+][+ IF bootstrap +][+ FOR bootstrap_stage +]
configure-stage[+id+]-target-[+module+]: maybe-all-stage[+id+]-target-libgcc[+
ENDFOR +][+ ENDIF bootstrap +][+ ENDIF +][+ ENDFOR target_modules +]
@endif gcc-bootstrap
@if gcc-no-bootstrap[+ FOR target_modules +][+ IF (not (lang-dep "no_gcc")) +]
configure-target-[+module+]: maybe-all-target-libgcc[+
ENDIF +][+ ENDFOR target_modules +]
@endif gcc-no-bootstrap
[+ FOR target_modules +][+ IF (not (lang-dep "no_c")) +]
configure-target-[+module+]: maybe-all-target-newlib maybe-all-target-libgloss[+
ENDIF +][+ IF (lang-dep "cxx") +]
configure-target-[+module+]: maybe-all-target-libstdc++-v3[+
ENDIF +]
[+ ENDFOR target_modules +]
CONFIGURE_GDB_TK = @CONFIGURE_GDB_TK@
GDB_TK = @GDB_TK@
INSTALL_GDB_TK = @INSTALL_GDB_TK@
configure-gdb: $(CONFIGURE_GDB_TK)
all-gdb: $(gdbnlmrequirements) $(GDB_TK)
install-gdb: $(INSTALL_GDB_TK)
# Serialization dependencies. Host configures don't work well in parallel to
# each other, due to contention over config.cache. Target configures and
# build configures are similar.
@serialization_dependencies@
# --------------------------------
# Regenerating top level configury
# --------------------------------
# Rebuilding Makefile.in, using autogen.
AUTOGEN = autogen
$(srcdir)/Makefile.in: @MAINT@ $(srcdir)/Makefile.tpl $(srcdir)/Makefile.def
cd $(srcdir) && $(AUTOGEN) Makefile.def
# Rebuilding Makefile.
Makefile: $(srcdir)/Makefile.in config.status
CONFIG_FILES=$@ CONFIG_HEADERS= $(SHELL) ./config.status
config.status: configure
CONFIG_SHELL="$(SHELL)" $(SHELL) ./config.status --recheck
# Rebuilding configure.
AUTOCONF = autoconf
$(srcdir)/configure: @MAINT@ $(srcdir)/configure.ac $(srcdir)/config/acx.m4 \
$(srcdir)/config/override.m4 $(srcdir)/config/proginstall.m4 \
$(srcdir)/config/elf.m4 $(srcdir)/config/isl.m4 \
$(srcdir)/libtool.m4 $(srcdir)/ltoptions.m4 $(srcdir)/ltsugar.m4 \
$(srcdir)/ltversion.m4 $(srcdir)/lt~obsolete.m4
cd $(srcdir) && $(AUTOCONF)
# ------------------------------
# Special directives to GNU Make
# ------------------------------
# Don't pass command-line variables to submakes.
.NOEXPORT:
MAKEOVERRIDES=
# end of Makefile.in