* cygheap.cc: Include security.h.
* grp.cc (internal_getgrent): New function.
(getgroups): Rearranged using `internal_getgrent' and the new
`cygsid' class.
* passwd.cc (internal_getpwent): New function.
* sec_acl.cc: Use new `cygsid' class throughout.
(acl_access): Use `internal_getgrent' instead of `getgrent'.
* sec_helper.cc: Use new `cygsid' class throughout.
(get_id_from_sid): Use `internal_getgrent' instead of `getgrent'.
Use `internal_getpwent' instead of `getpwent'.
* security.cc: Use new `cygsid' class throughout.
* security.h: Move `MAX_SID_LEN' from winsup.h to here.
Add extern declarations for `internal_getgrent' and `internal_getpwent'.
(class cygsid): New class.
* shared.cc (sec_user): Use new `cygsid' class.
* syscalls.cc (seteuid): Try to set owner to user and primary group to
current group in impersonation token before performing impersonation.
(setegid): Try to set primary group in process token to the new group
if ntsec is on.
* uinfo.cc (internal_getlogin): Use new `cygsid' class.
Try to set owner to user and primary group to current group in process
token if the process has been started from a non cygwin process.
(uinfo_init): Set primary group only if the process has been started
from a non cygwin process.
* winsup.h: Move define for `MAX_SID_LEN' to security.h.
* fhandler.h (fhandler_base::set_open_status): New method. Stores original
open status.
(fhandler_base::get_open_status): New method. Retrieves original open status.
(fhandler_base::reset_to_open_binmode): New method.
* fhandler.cc (fhandler_base::open): Save open status.
(fhandler_base::init): Ditto.
* fhandler_clipboard.cc (fhandler_clipboard::open): Ditto.
* fhandler_console.cc (fhandler_console::open): Ditto.
* fhandler_dsp.cc (fhandler_dsp::open): Ditto.
* fhandler_dev_mem.cc (fhandler_dev_mem::open): Ditto.
* fhandler_dev_random.cc (fhandler_dev_random::open): Ditto.
* fhandler_serial.cc (fhandler_serial::open): Ditto.
* fhandler_tty_slave.cc (fhandler_tty_slave::open): Ditto.
* fhandler_tty_master.cc (fhandler_tty_master::open): Ditto.
* fhandler_dev_zero.cc (fhandler_dev_zero::open): Ditto.
* syscalls.cc (setmode): Rework so that 0 mode value causes reversion to open
state.
* fhandler_tty_slave.cc (fhandler_tty_slave::read): Use correct multiplier when
converting from deciseconds to milliseconds.
is set to PCHECK_ADJUST when a case clash is given for the last
component in path.
(symlink_info::case_check): Ditto.
* syscalls.cc (_rename): Avoid overwriting an already existing file
if a case clash is given even if pcheck_case is set to PCHECK_ADJUST.
* environ.cc: Add extern declaration for `pcheck_case'.
(check_case_init): New function.
(struct parse_thing): Add "check_case" option.
* errno.cc (_sys_nerrlist): Add text for ECASECLASH.
(strerror): Add case branch for ECASECLASH.
* fhandler.cc (fhandler_disk_file::open): Check for case clash.
* path.cc: Add global variable `pcheck_case'.
(struct symlink_info): Add member `case_clash' and method `case_check'.
(path_prefix_p_): Call `pathnmatch' instead of `strncasematch'.
(pathnmatch): New funtion.
(pathmatch): Ditto.
(path_conv::check): Add handling for case checking.
(symlink): Check for case clash.
(symlink_info::check): Add parameter for case checking.
Handle case checking.
(symlink_info::case_check): New method.
(chdir): Don't use unconverted path if pcheck_case==PCHECK_STRICT.
* path.h: Add extern declarations for `pathmatch' and
`pathnmatch'.
(enum case_checking): New enumeration type describing
the case checking behaviour of path conversion routines.
(class path_conv): Add member `case_clash'.
* syscalls.cc (_link): Check for case clash.
element.
* path.cc (mount_info::getmntent): Report "/cygdrive" drives when mounted
drives are exhausted.
(fillout_mntent): New function.
(mount_item::getmntent): Use fillout_mntent.
(cygdrives_mntent): New function. Returns next available "/cygdrive".
(setmntent): Initialize available "/cygdrives".
* syscalls.cc: Remove some if 0'ed code.
* times.cc (timezone): Use more descriptive variable name.
(sigframe::~sigframe): Use unregister method.
(sigframe::call_signal_handler): Declare new method.
* exceptions.cc (sigframe::call_signal_handler): New method. Unregisters
current sigframe before calling signal handler.
(setup_handler): Clear waiting threads prior to arming signal_arrived.
* syscalls.cc (_read): Change goto to loop. Recalculate sigframe inside of
loop so that constructor is called when appropriate.
* wait.cc (wait4): Ditto.
* signal.cc: Change "sig" to "signal" in debugging messages throughout.
* sigproc.cc: Ditto.
(class suffix_scan): Add `lnk_state' flag.
(suffix_scan::lnk_match): Return state of `lnk_state' now.
(suffix_scan::has): Changed behaviour if file has `.lnk' suffix.
(suffix_scan::next): Set `lnk_state' where appropriate.
(symlink_info::check): Fix a wrong `break'.
* syscalls.cc (chown_worker): Change debug statement to reflect
lchown fix.
(lchown): Call chown_worker with `PC_SYM_NOFOLLOW' instead of
`PC_SYM_IGNORE'.
chrisiasci@aol.com).
* cygwin.din: Add a new, internally used export - _check_for_executable.
* dcrt0.cc (dll_crt0_1): Set _check_for_executable for older binaries. Pass
user_data to premain functions.
* fhandler.cc (fhandler_disk_file::open): Only check for executable if the
linked program is intereested in the executable bit.
(fhandler_disk_file::check_execable_p): Delete.
* fhandler.h (executable_states): New enumeration of various states of
executable bit caring.
(fhandler_base::set_execable_p): New method.
* fhandler_termios.cc (fhandler_termios::line_edit): Flag when a signal has
been sent to the tty. Return -1 when this is so.
* fhandler_console.cc (fhandler_console::read): Return -1 when signal sending
character encountered.
* path.cc (path_conv::check): Record when path refers to a disk device. Move
executable extension check here.
(check_sysfile): Accomodate new EXEC path states.
(has_suffix): Remove.
(next_suffix): Remove.
(class suffix_scan): New clas.
(suffix_scan::has): New method.
(suffix_scan:next): New method.
(symlink_info::check): Use suffix_scan method to control for scanning for
suffixes.
* path.h (path_conv::exec_state): New method.
* perprocess.h: Make "C" friendly.
* include/cygwin/version.h: Define CYGWIN_VERSION_CHECK_FOR_S_IEXEC. Bump
CYGWIN_VERSION_API_MINOR.
* include/sys/cygwin.h: Change premain declarations.
* winsup.h: Move __cplusplus test to after builtin defines.
* autoload.cc: Add LoadDLLinitfunc for ole32.dll.
Add LoadDLLfuncEx statements for CoInitialize@4, CoUninitialize@0
and CoCreateInstance@20.
* dir.cc (dir_suffixes): New datastructure.
(readdir): Check for R/O *.lnk files to hide the suffix.
(opendir): Use `dir_suffixes' in path conversion.
(rmdir): Ditto.
* fhandler.cc (fhandler_disk_file::fstat): Add S_IFLNK flag
before calling `get_file_attribute'. Take FILE_ATTRIBUTE_READONLY
into account only if the file is no symlink.
* path.cc (inner_suffixes): New datastructure.
(SYMLINKATTR): Eliminated.
(path_conv::check): Use `inner_suffixes' on inner path components.
(shortcut_header): New global static variable.
(shortcut_initalized): Ditto.
(create_shortcut_header): New function.
(cmp_shortcut_header): Ditto.
(symlink): Create symlinks by creating windows shortcuts. Preserve
the old code.
(symlink_info::check_shortcut): New method.
(symlink_info::check_sysfile): Ditto.
(symlink_info::check): Check for shortcuts. Move code reading
old system attribute symlinks into symlink_info::check_sysfile().
(chdir): Use `dir_suffixes' in path conversion.
* security.cc (get_file_attribute): Check for S_IFLNK flag.
Force 0777 permissions then.
* spawn.cc (std_suffixes): Add ".lnk" suffix.
* syscalls.cc (_unlink): Use `inner_suffixes' in path conversion.
Check for shortcut symlinks to eliminate R/O attribute before
calling DeleteFile().
(stat_suffixes): Add ".lnk" suffix.
(stat_worker): Force 0777 permissions if file is a symlink.
does.
* cygheap.cc (init_cheap): Don't specify a load address for the heap. It
doesn't work on #!*& Windows 9x.
(cygheap_init): Move GetUserName to memory_init.
* dcrt0.cc (dll_crt0_1): Call new memory_init functin, eliminate call to
heap_init.
* heap.cc (heap_init): Improve error output.
* heap.h: Correct some declarations.
* shared.cc (mount_table_init): Remove.
(memory_init): Renamed from shared_init. Reorganize to accomodate strange
Windows 9x problems with cygheap/heap interaction.
* shared_info.h: Rename shared_init to memory_init.
* child_info.h (child_info): Move shared_h, console_h to cygheap. Add mount_h.
* cygheap.h (init_cygheap): Add shared_h, console_h.
* cygheap.cc (init_cheap): Initialize heap at a fixed location after the shared
memory regions. Initialize cygheap->user name here.
* dcrt0.cc (dll_crt0_1): Call getpagesize () to initialize constants. Remove
cygheap_init since it is done in shared_init now.
(_dll_crt0): Initialize mount_h, remove shared_h and console_h initialization.
* fhandler_console.cc (console_shared_h): Eliminate.
(get_tty_stuff): Use cygheap->console_h rather than console_shared_h.
* heap.cc (heap_init): Use page size constant calculated earlier in
initialization.
* shared.cc: Eliminate cygwin_shared_h. Add cygwin_mount_h.
(mount_table_init): New function for initializing a user mount table.
(open_shared_file_map): Use constant for shared memory region. Initialize
cygheap and mount table here.
(open_shared): Improve debugging output.
(shared_info::initialize): Eliminate call to mount.init.
(shared_terminate): Use cygheap->shared_h. Close cygwin_mount_h.
(open_shared_file_map): Eliminate.
* shared_info.h (mount_info): Add a version field.
(shared_align_past): New macro for calculating location for shared memory
regions.
* sigproc.cc (init_child_info): Eliminate shared_h, console_h.
* spawn.cc (spawn_guts): Pass on cygwin_mount_h iff not a different user.
* syscalls.cc (system_info): New global holding system memory defaults.
(getpagesize): Use system_info.
* uinfo.cc (internal_getlogin): Only fill in user name if nonexistent.
* winsup.h: Declare system_info.
* passwd.cc (read_etc_passwd): Use cygheap->user.name () rather than retrieving
the name again.
* exceptions.cc (sig_handle_tty_stop): Move setting of PID_STOPPED to earlier
in interrupt.
((interrupt_setup): i.e., here.
(sig_handle): Don't queue multiple SIGSTOPS.
* fhandler.h (bg_check_types): Enumerate return value of bg_check for clarity.
* signal.cc (kill_pgrp): Minor cleanup.
* fhandler_termios.cc (fhandler_termios::bg_check): Use enumerated type for
function return. Don't raise signal if a signal is already queued.
* fhandler_console.cc (fhandler_console::read): Use enumerated return type for
bg_check.
* select.cc: Ditto, throughout.
* read.cc: Ditto, throughout.
* termios.cc: Ditto, throughout.
(_read): YA interrupt detect simplification.
* wait.cc (wait4): Ditto.
* signal.cc (sigaction): Don't treat SIGCONT specially.
* exceptions.cc (interrupt_setup): Save sa_flags of interrupted signal for
later use.
(sig_handler): Default any stopping signal to SIGSTOP.
(call_signal_handler): New function.
(sigdelayed0): New function.
* sigproc.cc (sigproc_init): Initialize SIGSTOP sigaction for special behavior.
* sigproc.h: Define call_signal_handler.
* syscalls.cc (_read): Allow restartable signal behavior.
`smbntsec'.
* path.cc (path_conv::check): Check path for being a remote path.
If so and `allow_smbntsec' is set to FALSE, set has_acls to FALSE.
* security.cc: Add global definition for `allow_smbntsec'.
* security.h: Add extern declaration for `allow_smbntsec'.
* fhandler.cc (fhandler_disk_file::open): Eliminate extern declaration
of `allow_ntsec'.
* syscalls.cc: Ditto.
(cygheap_root::~cygheap_root): Ditto.
(cygheap_root::operator=): Ditto.
(cygheap_user::~cygheap_user): Ditto.
(cygheap_user::set_name): Ditto.
(cygheap_user::set_logsrv): Ditto.
(cygheap_user::set_domain): Ditto.
(cygheap_user::set_sid): Ditto.
* cygheap.h (cygheap_root): New class.
(cygheap_user): Ditto.
(init_cygheap): Change type of `root' member to cygheap_root.
Add `user' member.
* dir.cc (opendir): Use new `cygheap_root' class.
* dcrt0.cc (dll_crt0_1): Use new `cygheap_user' class.
* fork.cc (fork_parent): Ditto.
* grp.cc (getgroups): Ditto.
* passwd.cc (search_for): Ditto.
* path.cc: Use new `cygheap_root' class throughout.
* pinfo.h (_pinfo): Remove `use_psid'. Move `username', `psid',
`logsrv', `domain', `orig_{uid,gid}' and `real_{uid,gid}' to
cygheap_user class.
* security.cc: Use new `cygheap_user' class throughout.
* shared.cc (sec_user): Ditto.
* sigproc.cc (proc_subproc): Remove copy statements for user
related information moved to `cygheap_user' class.
* spawn.cc (spawn_guts): Invalidate current chroot settings
when creating Windows environment. Use new `cygheap_user' class.
* syscalls.cc: Use new `cygheap_user' class throughout.
* uinfo.cc: Ditto.
* uinfo.cc (internal_getlogin): Change parameters to reflect the
move of user information to cygheap.
heap.
* child_info.h (child_info): Change pointer type of cygheap to init_cygheap.
* cygheap.cc (init_cheap): Point cygheap_max after contents of cygheap. Move
some stuff into cygheap.h.
* dir.cc (opendir): Change to use root and rootlen in cygheap rather than in
myself.
(mkdir): Change to use umask in cygheap rather than in myself.
* path.cc: Ditto, throughout.
* syscalls.cc (_open): Ditto. Change to use umask in cygheap rather than in
myself.
(chroot): Change to allocate root dir on the cygwin heap.
(umask): Change to use umask in cygheap rather than in myself.
(cygwin_bind): Ditto.
* sigproc.cc (proc_subproc): Don't copy umask or root stuff as this happens
automatically now.
* pinfo.h (_pinfo): Migrate stuff out of here and into init_cheap.
* dcrt0.cc (dll_crt0_1): Call cygheap_init later in startup for first cygwin
process.
execed process to avoid a race.
* sigproc.cc (wait_subproc): Print more info when a WFSO error occurs.
* automode.c: New file.
* syscalls.cc (close_all_files): Streamline slightly.
* cygheap.cc (ccalloc): Clear *entire* allocated array.
process has never created any children.
* fork.cc (fork): Set flag indicating that there is another process with our
process group.
* spawn.cc (spawn_guts): Ditto.
* pinfo.h (set_has_pgid_children): New methods for setting when process has
children in its process group.
* syscalls.cc (setpgid): Clear has_gid_children if pgid changes.
active.
* syscalls.cc (_read): Don't clear errno.
* sigproc.cc (wait_sig): Don't scan the waiting process list after a SIGCHLD if
there are no zombies to reap.
* winsup.h: Use __builtin_strcmp.
* environ.cc (posify): Don't initialize len unless it is required
(from DJ Delorie <dj@redhat.com>).
PROC_ADDCHILD. Return 0 when terminated child has just been reparented.
(wait_subproc): Only send SIGCHLD when proc_subproc returns != 0.
* strace.cc (strace::vsprntf): Only strip .exe extension from program name.
* dcrt0.cc (dll_crt0_1): Call signal_fixup_after_exec where appropriate. Set
myself->uid from parent version. Just use ThreadItem Init method. Close or
store hexec_proc as appropriate.
(_dll_crt0): Store user_data->forkee here so that proper tests can be made
subsequently.
(do_exit): Remove hExeced stuff.
* environ.cc (environ_init): Accept environ count as well as environ pointer.
* environ.h: Reflect above change.
* pinfo.cc (pinfo_init): Ditto. Accept environ count.
(fixup_in_spawned_child): Remove.
* spawn.cc (spawn_guts): Move signal code to dll_crt0_1. Don't suspend execing
process since it is no longer necessary. Store envc.
* exceptions.cc (signal_fixup_after_exec): New function.
(call_handler): Remove hExeced test.
* child_info.h (cygheap_exec_info): Store envc as well as envp.
(child_info_spawn): Store hexec_proc so that it can be closed in child.
* path.cc (normalize_posix_path): Avoid intermediate use of temporary cwd buf.
(normalize_win32_path): Ditto.
(cwdstuff::get_initial): Always set lock.
* sigproc.h: Remove hExeced.
* strace.cc (strace::vsprntf): Modify to accomodate for lack of hExeced.
* thread.cc (MTinterface::Init): Merge Init1 and ClearReent into this method.
(MTinterface::Init1): Eliminate.
(MTinterface::ClearReent): Eliminate.
* thread.h: Reflect above changes.
* include/sys/strace.h (strace): Make microseconds() public. Make various
functions 'regparm', throughout.
* pinfo.h (_pinfo): Inline simple signal manipulation functions. Requires
inclusion of thread.h which was removed from .cc files, where appropriate.
throughout.
* pinfo.cc: Eliminate signal manipulation functions.
(_pinfo::exit): Calculate total rusage for exiting process here.
* cygheap.cc (size2bucket): Eliminate.
(init_buckets): Ditto.
(_cmalloc): Calculate size and bits in a loop rather than going through a
function call.
(_crealloc): Use stored array index to calculate allocated size.
* spawn.cc (spawn_guts): Use _pinfo exit method to exit, calculating cpu usage.
console_handler_thread_waiter. It is obsolete.
(ctrl_c_handler): Don't use console_handler_thread_waiter.
* path.cc (hash_path_name): Fix handling of relative names. Make case
insensitive.
* path.h (suffix_info): Use initializers.
* pinfo.h (_pinfo): Avoid initializers for null case.
* resource.cc (fill_rusage): Zero rest of rusage structure.
* security.cc (set_process_privileges): Don't reopen parent process. Just use
hMainProc.
* signal.cc (signal): Track when a signal handler has been used.
(sigaction): Ditto.
* sigproc.cc (pchildren): Use default initializer.
(zombies): Ditto.
(sigproc_terminate): Avoid closing handles that will be closed on exit anyway.
(wait_sig): Send signal to "parent" on EXECing, not FORKing.
(wait_subproc): Send SIGCHLD here rather than in proc_wait to avoid potential
muto conflicts.
* sigproc.h (sigthread): Don't initialize to zero. It's the default.
* spawn.cc (spawn_guts): Fill in resources from exec parent prior to
termination.
* sync.h (muto): Don't initialize to zero.
* syscalls.cc (close_all_files): Use one lock around entire loop and call
fhandler close/release stuff directly.
(_read): Don't use ready_for_read if there are not signal handlers active.
* dcrt0.cc (dll_crt0_1): Fix display of "title".
(do_exit): Use pinfo exit method to exit.
(__api_fatal): Ditto.
* exceptions.cc (signal_exit): Ditto.
* fork.cc (fork_child): Remove debugging stuff. Use pinfo_fixup_after fork in
place of exec_fixup_after_fork.
* pinfo.cc (pinfo_fixup_after_fork): New method.
(pinfo_fixup_in_spawned_child): Ditto.
(_pinfo::exit): New method.
(_pinfo::init): Remove recursion. Detect pathological case where pinfo
structure already exists for new pid.
* pinfo.h (_pinfo): Reorganize slightly. Add new method and new function
declarations.
* sigproc.cc (proc_exists): Previous simplification was a little to simple.
Try harder to detect if a process exists.
(proc_terminate): Use PID_EXITED setting to determine if process is still
around.
(WFSO): Remove debugging statement.
(WFMO): Ditto.
* spawn.cc (exec_fixup_after_fork): Eliminate.
(spawn_guts): Always set old_title to NULL. Is it really needed? Move
hexec_proc to pinfo.cc. Call pinfo_fixup_in_spawned_child to eliminate handle
link after a spawn.
* include/sys/cygwin.h: Remove PID_NOT_IN_USE. Add PID_EXITED.
* fhandler.cc (fhandler_base::fstat): Move to inline method in fhandler.h.
(fhandler_base::set_io_handle): Ditto.
* fhandler.h (fhandler_base): Make some methods inline.
* fhandler_console.cc (fhandler_console::write_normal): Make buffer larger.
* sigproc.h (sigframe::sigframe): Actually use set ebp parameter correctly.
* spawn.cc (spawn_guts): Set dwProcessId when exec'ing. Just exit immediately
after reparenting.
* syscalls.cc: Sprinkle sigframe stuff throughout.
* wait.cc (wait4): Set signal frame here.
* dcrt0.cc (__api_fatal): Don't rely on small_printf to display errors. Always
display problems to the console, if possible.
* environ.cc (environ_init): Remember to reparse CYGWIN if envp is
supplied.
* heap.cc (_sbrk): Remember frame for signal handling.
* syscalls.cc (read_handler): Eliminate.
(_read): Move read_handler code here. Reorganize for one path through
'ready_for_read'.
throughout.
* shared.h: Remove.
* cygwin_version.h: New file.
* delqueue.h: New file.
* environ.h: New file.
* host_dependent.h: New file.
* perprocess.h: New file.
* registry.h: New file.
* security.h: New file.
Include sys/termios.h for files which need it.
* tty.h: New file.
* shared_info.h: New file.
* fhandler.h: Move inline methods that rely on tty stuff to
fhandler_console.cc.
* fhandler_tty.cc (fhandler_pty_master::process_slave_output): Set
output_done_event immediately after reading data to speed up tty output
processing.
(process_output): Set write_error to errno or zero.
(fhandler_tty_slave::write): Check previous write error prior to writing to
slave end of pipe. This allows tty output to be slightly less synchronous.
* fhandler_console.cc (fhandler_console::tcsetpgrp): Moved here from
fhandler.h.
(fhandler_console::set_input_state): Ditto.
* child_info.h: Add specific exec class.
* cygheap.h: New file. Contains declarations for cygwin heap.
* cygheap.cc: New file. Implements cygwin heap functions.
* dcrt0.cc (quoted): Simplify due to new method for passing arguments between
cygwin programs.
(alloc_stack_hard_way): Attempt to handle overlapped stack.
(dll_crt0_1): Move child_info processing here. Accomodate new method for
passing arguments between cygwin programs. Initialize cygwin heap. Establish
__argc and __argv variables.
(_dll_crt0): Move most of child_info processing to dll_crt0_1.
(cygwin_dll_init): Remove duplication.
* dtable.cc (dtable::extend): Allocate dtable using cygwin heap.
(dtable::build_fhandler): Ditto for fhandler type being constructed.
(dtable::dup_worker): Free new fhandler from cygwin heap on error.
(dtable::select_*): Don't assume that this == fdtab.
(dtable::linearize_fd_array): Delete.
(dtable::delinearize_fd_array): Delete.
(dtable::fixup_after_exec): New file.
(dtable::vfork_child_dup): Use cygwin heap.
(dtable::vfork_parent_restore): Ditto.
* dtable.h: Remove obsolete methods. Add new method.
* environ.cc (posify): Eliminate already_posix parameter and logic.
(envsize): New function.
(_addenv): Use envsize.
(environ_init): Accept an argument pointing to an existing environment list.
If supplied, allocate space for this in the the program's heap.
* fhandler.cc (fhandler_base::operator =): Move here from fhandler.h. Use
cygwin heap to allocate filenames.
(fhandler_base::set_name): Allocate/free names from cygwin heap.
(fhandler_base::linearize): Delete.
(fhandler_base::de_linearize): Delete.
(fhandler_base::operator delete): Free from cygwin heap.
(fhandler_base::~fhandler_base): Ditto.
* fhandler.h: Accomodate elimination of *linearize and other changes above.
* fhandler_console.cc (fhandler_console::fixup_after_exec): Rename from
de_linearize.
* heap.h: New file.
* fhandler_tty.cc (fhandler_tty_slave::fhandler_tty_slave): Use cygwin heap for
name. fhandler_tty::fixup_after_exec): Rename from de_linearize.
* fork.cc (fork): Call cygheap_fixup_in_child.
* heap.cc: Use declarations in heap.h.
* malloc.cc: Sprinkle assertions throughout to catch attempts to free/realloc
something from the cygwin heap.
* path.cc: Throughout, eliminate use of per-thread cache for cwd. Use cwd_*
functions rather than cwd_* variables to access cwd_win32 and cwd_posix.
(cwd_win32): New function.
(cwd_posix): New function.
(cwd_hash): New function.
(cwd_fixup_after_exec): New function.
* path.h: Accomodate path.cc changes.
* pinfo.cc (pinfo_init): Accept a pointer to an environment table. Pass this
to environ_init. Eliminate old 'title' tests.
* pinfo.h: Accomodate above change in argument.
* spawn.cc (struct av): New method for building argv list.
(av::unshift): New method.
(spawn_guts): Allocate everything that the child process needs in the cygwin
heap and pass a pointer to this to the child. Build argv list using new
method. Eliminate delinearize stuff.
* thread.h: Eliminate _cwd_win32 and _cwd_posix buffers.
* winsup.h: Eliminate obsolete functions. Add envsize() declaration.
required.
* errno.cc: Use DWORD to hold Windows errors.
(geterrno_from_win_error): New function.
(seterrno_from_win_error): Use geterrno_from_win_error to convert supplied
windows error (suggested by Corinna Vinschen).
* path.cc (symlink_info): Add error element.
* path.cc (path_conv::check): Remove errno setting. Use new symlink_info errno
element to set path_conv error, where appropriate.
(symlink_info::check): Set error element rather than attempting to manipulate
errno. Add more checks for trailing / and /.. even though they are currently
useless. Avoid setting EINVAL.
* path.cc (normalize_posix_path): Correct check for trailing /.
(cygwin_select): Move fd_set copying logic from ::wait to here. Use common
return through sell.poll.
(select_stuff::wait): Just return success or failure and let caller fill in
fd_set.
* pinfo.h (pinfo): Eliminate self-referential pointer to sidbuf since pinfo
structure exists at random locations now.
* fork.cc (fork): Use 'use_psid' element to control when the psid is relevant.
* shared.cc (sec_user): Ditto.
* spawn.cc (spawn_guts): Ditto.
* uinfo.cc (internal_getlogin): Ditto.
* syscall.cc (seteuid): Ditto. Set use_psid element.
since we are already bounds checked by default.
* thread.cc (ResourceLocks::Lock): Streamline this function since it is called
a lot.
(ReleaseResourceLock): Ditto.
* *.cc: put winsup.h before other headers (for __INSIDE_CYGWIN__);
use cur_environ() instead of just environ
* times.cc: remove import protections
* glob.c: add winsup.h
* localtime.c: ditto
* smallprint.c: ditto
* Makefile.in: don't __INSIDE_CYGWIN__ as it messes up profiling.
the changes below. Redefine process structure to avoid a fixed size table.
Redefine pinfo/_pinfo classes. Use these throughout.
* dcrt0.cc (dll_crt0_1): Accomodate set_myself argument change.
(__api_fatal): Accomodate _pinfo::record_death argument change.
* exceptions.cc (really_exit): Ditto.
(sig_handle_tty_stop): Use pinfo constructor to access process info.
(events_init): Don't create pinfo_mutex since it is no longer required.
* external.cc (fillout_pinfo): Use winpids class to iterate over all system
pids.
(cygwin_internal): lock_pinfo_for_update and unlock_pinfo are now noops.
* fhandler_termios.cc (fhandler_termios::set_ctty): Use pinfo constructor to
access process info.
* fork.cc (fork): Reorganize to initialize child info after the child has
started since that is when we know the child's winpid, which is necessary to
allocate the pinfo shared memory.
* mmap.cc (recreate_mmaps_after_fork): Change arg type to _pinfo.
* pinfo.cc: Rename pinfo methods to _pinfo throughout. Eliminate pinfo_list
stuff.
(set_myself): Accept a pid argument now. Call pinfo initializer to initialize
myself. Detect when this is an "execed" process and create an "indirect" pid
block.
(pinfo_init): Accomodate set_myself arg change.
(procinfo): Remove.
(pinfo::lock_pinfo): Remove.
(pinfo::unlock_pinfo): Remove.
(pinfo::init): New method. Allocates shared memory space for process pinfo
structure.
(pinfo::record_death): Don't call locking functions.
(cygwin_winpid_to_pid): Simplify by using new pinfo constructor.
(EnumProcessesW95): New function for iterating over processes on Windows 95.
(winpids::winpids): New constructor for winpids class. Sets up a list of
process ids.
(enum_init): Initialize w95/wnt pid enumerators.
* shared.cc (shared-info::initialize): Remove pid initialization.
* shared.h: Move pinfo stuff into pinfo.h.
(class shared_info): Remove pinfo_list element.
* signal.cc (kill_worker): Use pinfo constructor to access process info.
(kill_pgrp): Ditto. Use winpids methods to access list of processes.
* sigproc.cc: Throughout, modify to use _pinfo where appropriate.
(proc_exists (pid_t)): New function. Determines if a process exists based on
the pid.
(proc_exists (_pinfo *p): Use new proc_exists function above.
(proc_subproc): Copy pinfo stuff around rather than _pinfo pointers. Try to be
careful about releasing shared memory when we don't need it anymore. Remove
pinfo locks.
(remove_zombies): Remove pinfo memory when zombie is going away.
* sigproc.h: Reflect _pinfo/pinfo changes in sigproc.cc.
* spawn.cc (spawn_guts): Eliminate pinfo *child argument. Reorganize to only
initialize child pinfo after process has been started and we know the windows
pid.
(_spawnve): Reflect spawn_guts changes.
* syscalls.cc (setpgid): Use pinfo constructor to access process info.
(getpgid): Ditto.
(internal_getlogin): Use _pinfo.
* winsup.h: Eliminate pinfo_mutex. Eliminate spawn_guts declaration since it
is static now. Reflect set_myself argument change.
* include/sys/cygwin.h: Add some PID_* enums to accomodate new pinfo stuff.
* include/cygwin/version.h: Update minor version for cygdrive changes below.
* winsup.h: Add new macros sys_wcstombs and sys_mbstowcs.
* syscalls.cc (_link): Replace calls to mbstowcs by call to
sys_mbstowcs.
* uinfo.cc (internal_getlogin): Replace calls to wcstombs and
mbstowcs by calls to sys_wcstombs and sys_mbstowcs. Replace
usage of constants by meaningful defines. Use result of
GetSystemDirectory for HOMEPATH and HOMEDRIVE as a last resort.
* syscalls.cc (chroot): Set new root for process.
* path.cc (getcwd_inner): Add parameter to force use of
new root from chroot() call.
(ischrootpath): New macro.
(normalize_posix_path): Care for changed root dir.
(normalize_win32_path): Ditto.
(getcwd_inner): Ditto.
(chdir): Eliminate trailing path component consisting
entirely of dots.
* fork.cc (fork): Copy pinfo members regarding chroot().
* spawn.cc (_spawnve): Ditto.
* dir.cc (opendir): Don't use computed win32 path if
chroot() took place.
for second argument.
* path.h: Generalize SYMLINK_* constants to PC_*.
(path_conv): Create a new method. Fold third argument into second.
* dll_init.cc (dll_list::alloc): Try harder to find space to allocate dll
struct.
(dll_dllcrt0): Don't check sanity if we've already called dll_crt0.
* path.cc (path_conv::check): Don't check for a null or empty path unless
specifically told with a flag setting.
(check_null_empty_path): New function, adapted from macro.
* syscalls.cc (_rename): Use already-determined file attributes rather than
checking again.
* lib/cygwin/cygwin_attach.dll.c (cygwin_attach_dll): Use a static per_process
structure since this is apparently supposed to be zeroed.
* lib/cygwin_crt0.c (cygwin_crt0): Zero per_process structure sent to older
DLLs.
an fd.
* external.cc (cygwin_internal): Add handling of perfile_table setting.
* fhandler.cc (perfile_table): New global.
(fhandler_base::get_default_fmode): New method to return a file's default mode
based on its name.
(fhandler_base::open): Use get_default_mode method to determine a file's mode.
Record file mode in file flags.
* fhandler.h (fhandler_base): Declare get_default_fmode
* syscalls.cc (getmode): New function.
* sys/cygwin.h (__cygwin_perfile): New structure.
(cygwin_getinfo_types): Move outside of WINVER conditional.
(per_process): Move inside of WINVER conditional.
* (dummy_autoload): Add functions used in fhandler_console.
* fhandler_console.cc (fhandler_console::read): Use ENCHANCED_KEY flag to
distinguish extended keys. Translate an input character from the OEM code page
to the ANSI code page.
* (fhandler_console::write_normal): Translate output characters from the ANSI
code page to the OEM code page.
* syscalls.cc (_link): Use MultiByteToWideChar instead of OemToCharW.
* fork.cc (fork): Use above defines instead of numerical constants.
* shared.cc (sec_user): Ditto.
* shared.h (class pinfo): Ditto.
* syscall.cc (seteuid): Ditto.
* spawn.cc (_spawnve): Ditto. Eliminate conditional.
(spawn_guts): Set child->uid = USHRT_MAX when user context will be
changed in child process.
* uinfo.cc (uinfo_init): Check for myself->uid instead of myself->psid
to avoid reloading of /etc/passwd on process startup if ntsec is off.
Use above defines instead of numerical constants.
* security.cc: Move define for MAX_SID_LEN to winsup.h.
internal_getlogin().
* uinfo.cc (internal_getlogin): Use impersonation token instead
of process token in case of active impersonation. Add some comments.
(uinfo_init): Initializing myself->token and myself->impersonated
before calling internal_getlogin(). Add some comments.
`cygwin_set_impersonation_token'.
* dcrt0.cc (dll_crt0_1): Eliminate superfluous conditional
statements.
Add load statements for `ImpersonateLoggedOnUser', `LogonUserA'
and `RevertToSelf'.
* fork.cc (fork): Care for correct impersonation of parent
and child process.
* security.cc (cygwin_set_impersonation_token): New function.
(cygwin_logon_user): Ditto.
shared.h (class pinfo): New members `orig_uid', `orig_gid',
`real_uid' nad `real_gid'.
spawn.cc (spawn_guts): Care for impersonation when starting
child process in a different user context.
* syscalls.cc (setgid): Call `setegid' now. Set real_gid.
(setuid): Call `seteuid' now. Set real_uid.
(seteuid): Functionality moved from setuid to here. Care for
correct impersonation.
(setegid): Functionality moved from setgid to here.
* uinfo.cc (uinfo_init): Initialization of additional pinfo
members.
(getuid): Return real uid.
(getgid): Return real gid.
(geteuid): Return effective uid.
(getegid): Return effective gid.
include/sys/cygwin.h: Add prototypes for `cygwin_logon_user' and
`cygwin_set_impersonation_token'.
include/cygwin/version.h: Bumb API minor version to 22.
return always 1 for now.
(mkdir): Call set_file_attribute explicitely with S_IFDIR mode bit.
* syscalls.cc (chown_worker): Ditto.
(chmod): Ditto.
* security.cc (get_nt_attribute): Fix error in debug output.
Never set FILE_DELETE_CHILD for files.
Construct appropriate inherit attribute according to file type.
when trying to remove a directory on a samba share.
Eliminate superfluous else branch.
* syscalls.cc (_rename): Additional check for ERROR_FILE_EXISTS
if MoveFile fails.
referring to something like c:\.
* dcrt0.cc (dll_crt0_1): Move uinfo initialization prior to sig_send
initialization to give signal thread a chance to finish.
* debug.cc (WFSO): Move to sigproc.cc
(WFMO): Ditto.
* exceptions.cc (interruptible): Allocate slightly more space for directory
just for paranoia's sake.
(call_handler): Eliminate nonmain argument. Determine if main thread has set a
frame pointer and use it if so.
(sig_handle): Eliminate nonmain argument.
* net.cc: Record frame information in appropriate routines throughout.
* select.cc (select): Ditto.
* sigproc.cc: Use sigthread structure to record mainthread id throughout.
(sig_send): Record frame information for signal handler.
(wait_sig): Reflect argument change in sig_handle.
(WFSO): Move here and record frame information for signal handler.
(WFMO): Ditto.
* sigproc.h: Implement new "sigthread" class. Implement "sigframe" class for
manipulating signal frame info.
* thread.cc (__pthread_kill): Use standard _kill() function rather than calling
sig_send directly.
* winsup.h: Eliminate ebp element from signal_dispatch class.
better handling of symbols.
* configure: Regenerate.
* delqueue.cc (delqueue_list::process_queue): Allow ERROR_ACCESS_DENIED to
indicate that a file is being shared under Windows 95.
* syscalls.cc (_unlink): Use full path name. Take special action for Windows
95. Assume that an ERROR_ACCESS_DENIED indicates a sharing violation unless
it's on a remote drive. Punt if there is an ERROR_ACCESS_DENIED on a remote
drive.
when determining exec flag.
* path.cc (symlink_info::check): Remove call to get_file_attribute().
* security.cc (read_sd): Rename, ditto for variables to conform
to common naming convention. Use GetFileSecurity() instead of
BackupRead() to avoid permission problems when reading ACLs.
(write_sd): Same renaming as for read_sd().
(alloc_sd): Change default permissions according to Linux permissions
for group and world when write permission is set.
* syscalls.cc (stat_worker): Avoid different permission problems
when requesting file informations.
* path.cc (symlink_info::check): Rename from symlink_check_one. Use new
symlink_info struct for communication.
(path_conv::path_conv): Use symlink_info structure for communication with
symlink_info::check. Fix typo which resulted in symbolic links always being
resolved.
(readlink): Use stat_suffixes array when resolving a link.
* syscalls.cc (stat_suffixes): Make global.
fchmod, fchown, lchown.
* winsup/cygwin/syscalls.cc (chown_worker): Use previous
uid/gid if new uid/gid is -1.
New static function with chown functionality.
(chown): Call chown_worker with SYMLINK_FOLLOW.
(fchown): New function. Call chown_worker with SYMLINK_FOLLOW.
(lchown): New function. Call chown_worker with SYMLINK_IGNORE.
* cygwin.din: Add symbols for fchown, lchown.
* path.cc (symlink): Call `set_file_attribute()' and
`SetFileAttributeA()' instead of `chmod()' to set
uid/gid correct.
* path.h: Make PATH_SYMLINK an alias for MOUNT_SYMLINK.
* syscalls.cc (stat_worker): Use extension search mechanism in path_conv to
look for .exe rather than trying to special case it here.
* mount.h: Make MOUNT_SYMLINK a real option.
* path.h (class path_conv): Add a char * operator for the most common case.
* syscalls.cc (_unlink): Rewrite to use FILE_FLAG_DELETE_ON_CLOSE when possible
(i.e., on NT).
(get_nt_attribute): Returns uid and gid additionally. Removed call
to set_process_privileges().
(get_file_attribute): Returns uid and gid additionally. Don't
call ntea if ntsec is ON.
(set_nt_attribute): Removed call to set_process_privileges().
Don't call ntea if ntsec is ON.
(acl): Removed call to set_process_privileges().
* dcrt0.cc (dll_crt0_1): Calls set_process_privileges() now.
* winsup.h: New prototype for set_process_privileges(),
changed prototype for get_file_attribute().
* fhandler.cc (get_file_owner): Discarded.
(get_file_group): Ditto.
(fhandler_disk_file::fstat): Discard calls to get_file_owner() and
get_file_group().
* path.cc (path_conv::path_conv): Added debugging output for result
of GetVolumeInformation().
(mount_info::conv_to_win32_path): Call backslashify() with pathbuf
instead of src_path.
* syscalls.cc (chown): Reformatted.
(chmod): Replace get_file_owner() and get_file_group() calls
by a call to get_file_attribute(). Discard local variable has_acls.
Slightly reformatted.
(stat_worker): Replaced idiot's (it's me) root dir check by call
to rootdir(). Don't call num_entries() on remote drives.
Discard local variable has_acls.
* exceptions.cc (sfta): Eliminate obsolete function.
(sgmb): Eliminate obsolete function.
(class stack_info): Remove MS method for walking the stack.
(stack_info::init): Just initialize required fields.
(stack_info::brute_force): Rename to stack_info::walk.
(handle_exceptions): Pass derived frame pointer to sig_send.
(interrupt_setup): Clear saved frame pointer here.
(interrupt_on_return): thestack is no longer a pointer.
(call_handler): Accept a flag to indicate when a signal was sent from other
than the main thread. Use saved frame pointer for determining where to place
signal handler call.
(sig_handle): Accept "nonmain" argument. Pass it to call_handler.
* fhandler_tty.cc (fhandler_tty_common::__acquire_output_mutex): Change
debugging output slightly.
* (fhandler_tty_common::__release_output_mutex): Ditto.
(fhandler_tty_slave::read): Fix a comment, remove a goto.
* sigproc.cc (sig_send): Accept an optional frame pointer argument for use when
suspending the main process. sigcomplete_main is an autoreset event now. Save
frame pointer for non-main operation.
(wait_sig): Make sigcomplete_main an autoreset event. Eliminate NOSIGQUEUE.
Pass rc to sig_handle to signify if this was a nonmain process.
* sigproc.h: Reflect change to sig_send argument.
* syscalls.cc (swab): Eliminate swab function since it is now available in
newlib.
* winsup.h (signal_dispatch): Change CONTEXT cx to DWORD ebp.
Corinna Vinschen
Christopher Faylor
Egor Duda
DJ Delorie
Mumit Khan