* pinfo.cc (pinfo::init): Initialize exitcode to unset state rather than
SIGTERM.
(proc_waiter): Detect if exit code is unset and use status from
GetExitCodeProcess.
* sigproc.cc (child_info::sync): Remove exit code detection here since
proc_waiter now (again) detects it.
(child_info::parent_wr_proc_pipe): Eliminate.
* pinfo.h (_pinfo::alert_parent): Move here from pinfo class.
(_pinfo::dup_proc_pipe): New method.
(_pinfo::sync_proc_pipe): Ditto.
* exceptions.cc (sig_handle_tty_stop): Reflect move of alert_parent.
* init.cc (dll_entry): Exit with status one if main process called ExitProcess.
* pinfo.cc (set_myself): Remove handling of parent_wr_proc_pipe.
(_pinfo::exit): Reflect move of alert_parent. Set procinfo to NULL to flag
that we are exiting normally. Always use exitcode when exiting
(although this could be a little racy).
(pinfo::init): Set default exit to SIGTERM. This will be the exit code
reported if process is terminated.
(_pinfo::dup_proc_pipe): New function.
(pinfo::wait): Duplicate wr_proc_pipe to the right place. Use dup_proc_pipe to
move the pipe to the child.
(_pinfo::sync_proc_pipe): New function.
(_pinfo::alert_parent): Move to _pinfo. Make sure that wr_proc_pipe is ours
before using it.
* sigproc.cc (child_info::child_info): Remove handling of parent_wr_proc_pipe.
* spawn.cc (spawn_guts): Pass our wr_proc_pipe to the child when execing.
Ensure that exit code of cygwin process started from windows is correctly set.
itself here, to avoid a race.
(cygthread::release): Clear more stuff. Add a diagnostic for an internal
error.
* cygthread.h (auto_release): New function.
* pinfo.h (pinfo::remember): Add an argument to denote whether child is
detached.
* fork.cc (fork_parent): Reflect change in arguments to pinfo::remember.
* pinfo.cc (_pinfo::exit): Signal exit more forcibly.
(proc_waiter): Use cygthread::auto_release to signify that cygthread::stub
should release the thread. This should avoid a race.
(pinfo::alert_parent): Don't signify an error when wr_proc_pipe == NULL.
* sigproc.cc (proc_subproc): Add support for PROC_DETACHED_CHILD.
* sigproc.h: Ditto.
* spawn.cc (spawn_guts): Specify whether child is detached or not when calling
pinfo::remember.
hProcess handle here since it is used to ensure that a new process isn't
created with the old pid after the old pid exits.
* spawn.cc (spawn_guts): Ditto.
* pinfo.cc (proc_waiter): Don't send any signals if we've execed since this
process doesn't officially exist.
* pinfo.h (pinfo::pid_handle): Eliminate. Just use hProc.
* sigproc.cc (sig_send): Don't send any signals if our sendsig doesn't exist.
That's a sign that we are execing.
(remove_proc): Eliminate pid_handle close.
* pinfo.h (pinfo::wait_thread): New element.
* pinfo.cc (pinfo::wait): Store "handle" to started thread in pinfo.
* sigproc.cc (proc_terminate): Kill any threads waiting for a process pipe.
(proc_subproc): Don't mess with pinfo if it's myself.
* child_info.h (child_info_types): Label enum for _PROC constants.
(child_info::child_info): New constructor.
(child_info::~child_info): New destructor.
(child_info::sync): Declare new function.
(child_info_fork::child_info_fork): New constructor.
(child_info_spawn::child_info_spawn): Remove old constructor.
(child_info_spawn::child_info_spawn): New constructor.
* dcrt0.cc (dll_crt0_0): Use correct sizeof when doing sanity check on passed
in child_info. Signal readiness to parent when not forking (and not spawning).
* fork.cc (sync_with_child): Delete.
(resume_child): Remove extra argument.
(sync_with_parent): Use child_info method to sync with parent.
(fork_child): Don't close fork_info->subproc_ready since that is now handled by
the destructor.
(fork_parent): Remove subproc_ready stuff. Use child_info sync method for
waiting.. Set start time here for child. Rename "forked" to "child".
(fork): Check ch.subproc_ready for validity here.
* pinfo.h (_pinfo::exec_sendsig): Temp storage for exec stub which may be
staying around to handle non-cygwin captive process.
(_pinfo::exec_dwProcessId): Ditto.
(_pinfo::_lock): Renamed from lock.
(_pinfo::lock): New method.
(_pinfo::unlock): Ditto.
(_pinfo::initialize_lock): Ditto.
* pinfo.cc (set_myself): Use initialize_lock method to initialize myself lock.
Set "exec" fields in _pinfo to zero to indicate that we've started
successfully. Set start time here when appropriate.
(_pinfo::commune_send): Use pinfo lock/unlock methods.
(proc_waiter): Remove special case for non-cywin processes. Reinstitute
handling for PID_NOCLDSTOP.
* sigproc.cc (proc_subproc): Set proper EAGAIN errno when process table is
filled.
(sig_send): Use exec_* fields from _pinfo for sending signals if the the _pinfo
sendsig never materializes.
(child_info::child_info): New constructor, renamed from init_child_info.
Zeroes child_info structure and sets appropriate fields in structure based on
chtype.
(child_info::~child_info): New destructor. Closes subproc_ready if it exists.
(child_info_fork::child_info_fork): New constructor.
(child_info_spawn::child_info_spawn): New constructor.
(child_info::ready): New function. Signals parent when child is ready.
(child_info::sync): New function. Wait for child to signal us or process to
die.
(remove_proc): Remove closing of hProcess since this should now be handled
shortly after process creation.
* spawn.cc (spawn_guts): Use child_info_spawn constructor rather than
init_child_info. Save exec_sendsig and exec_dwProcessId in execing _pinfo.
Rely on child_info constructor to properly set parent_wr_proc_pipe in ciresrv.
Revert to previous determination on whether to start a process in suspended
mode. Remove reparenting stuff. Just keep a stub around if starting a
non-cygwin process.
* fork.cc (fork_parent): Set parent_wr_proc.
* pinfo.cc (set_myself): Close child_proc_info->parent_wr_proc if it exists
rather than trying to get value from parent _pinfo.
* pinfo.h (enum parent_aleter): New enum.
(pinfo::alert_parent): Declare as returning a value.
(pinfo::parent_alive): New function.
* pinfo.cc (pinfo::alert_parent): Set wr_proc_pipe to invalid non-NULL value
when parent disappears. Return success of operation.
(proc_waiter): Use __ALERT_* enum for control since these are not really
signals. Implement __ALERT_ALIVE.
* sigproc.cc (my_parent_is_alive): Eliminate.
* sigproc.h (my_parent_is_alive): Ditto for declaration.
(__SIGREPARENT): Eliminate.
* dcrt0.cc (dll_crt0_0): Remove hexec_proc stuff.
* fork.cc (fork_child): Remove call to pinfo_fixup_after_fork.
* pinfo.cc (set_myself): Close and zero pid_handle if set.
(pinfo_fixup_after_fork): Delete.
(proc_waiter): Don't close vchild.hProcess here. Do that when we are remove
the vchild from procs. Save hProcess as pid_handle only on first reparent
operation.
(pinfo::wait): Don't set pid_handle here.
(pinfo::alert_parent): Always try to send signal. If unsuccessful then close
and zero wr_proc_pipe.
* pinfo.h (pinfo::pinfo): Make sure that appropriate parts of the class are
zeroed on construction.
(pinfo::alert_parent): Take char argument.
(pinfo_fixup_after_fork): Delete declaration.
(hexec_proc): Ditto.
* sigproc.cc (remove_proc): Close pid_handle and hProcess if appropriate.
* spawn.cc (spawn_guts): Set cygheap->pid_handle on first exec.
* cygheap.h (init_cygheap::pid_handle): New element.
* pinfo.cc (set_myself): Clear previously existing cygheap->pid_handle when a
new process has been started.
(pinfo::wait): Make sure that a handle to the newly forked/spawned process is
kept around so that the pid will not be reused.
* pinfo.h (_pinfo::pid_handle): Move.
(pinfo::pid_handle): to here.
* spawn.cc (spawn_guts): Create a pid_handle in cygheap prior to spawning to
ensure that the pid does not get reused during the lifetime of the "cygwin
pid".
* pinfo.h (pinfo::alert_parent): New function.
* exceptions.cc (sig_handle_tty_stop): Use alert_parent to send "signals" to
parent.
* fork.cc (fork_parent): Don't close pi.hProcess. Let the waiter thread do
that.
* pinfo.cc (proc_waiter): Detect case where process exits without setting the
exit code and use value from GetExitCodeProcess. Reluctantly implement
__SIGREPARENT.
(pinfo::alert_parent): Define.
* sigproc.h (__SIGREPARENT): New enum.
* spawn.cc (spawn_guts): Send reparent signal to parent on exec. Always create
process in suspended state to avoid races. Remove cygthread.h in favor of
cygtls.h throughout since cygtls now includes cygthread.h. Eliminate
ppid_handle usage throughout.
* child_info.h: Regenerate magic number
(child_info): Remove pppid_handle.
* cygthread.h (cygthread::release): New method. Frees thread without waiting.
* cygthread.cc (cygthread::stub): Set _ctinfo in _mytls to point to information
for executing thread. Don't call SetEvent if thread is no longer in use.
(cygthread::simplestub): Ditto.
* cygtls.h (_cygtls::_ctinfo): New element contains pointer to information
about executing cygthread, if any.
* dcrt0.cc: Remove last vestiges of per_thread stuff.
(dll_crt0_0): Ditto. Remove accommodation for ppid_handle.
(do_exit): Remove obsolete reparenting test.
(_exit): Exit with a more SUSv3-like exit value.
* dtable.cc (dtable::stdio_init): Check for myself->cygstarted rather than
myself->ppid_handle to see if we were started by a cygwin process.
* exceptions.cc (open_stackdumpfile): Ditto.
(handle_exceptions): Ditto.
(ctrl_c_handler): Ditto.
(sig_handle_tty_stop): Ditto. Let parent send signal to itself on STOP.
(sigpacket::process): Comment out vfork test.
(signal_exit): Use more SUSv3-like exit value on signal.
* external.cc (fillout_pinfo): Don't set hProcess.
* fork.cc: Remove VFORK cruft.
(per_thread::set): Delete.
(fork_child): Remove perthread stuff.
(fork_parent): Remove obsolete subproc_init. Accommodate new method for
tracking subprocesses.
* pinfo.cc (set_myself): Accommodate new pinfo/_pinfo layout. Set some things
here that used to be set in wait_sig.
(_pinfo::exit): Set exitcode here. Close process pipe.
(_pinfo::commune_send): Accommodeate new pinfo/_pinfo layout.
(proc_waiter): New function. Waits, in a thread for subprocess to go away.
(pinfo::wait): New function. Initialization for proc_waiter.
* pinfo.h (_pinfo::exitcode): New element.
(_pinfo::cygstarted): Ditto.
(_pinfo::wr_proc_pipe): Ditto.
(_pinfo::ppid_handle): Delete.
(_pinfo::hProcess): Delete.
(_pinfo::lock): Delete.
(pinfo::hProcess): New element.
(pinfo::lock): Ditto.
(pinfo::wait): Declare new function.
(pinfo::preserve): Define new function.
* sigproc.cc: Remove old stuff from wait_subproc thread based method.
(zombies): Remove.
(procs): New.
(my_parent_is_alive): Just check that the parent pid exists.
(mychild): Just use pinfo methods to determine if child is mine.
(proc_subproc): Revamp PROC_ADDCHILD to use pinfo::wait. Remove
PROC_CHILDTERMINATED logic. Use different method to remove processes from list
when SIGCHLD == SIG_IGN.
(proc_terminate): Gut.
(subproc_init): Delete.
(init_child_info): Remove setting of pppid_handle.
(checkstate): Revamp to only scan procs array.
(remove_proc): Rename from remove_zombie. Don't close hProcess or pid_handle.
Don't release memory if it's myself.
(stopped_or_terminated): Change logic to handle new consolidated proc/zombie
array.
(wait_subproc): Delete.
* sigproc.h: Remove obsolete EXIT_* defines.
(subproc_init): Remove declaration.
* spawn.cc (spawn_guts): Remove reparenting stuff. Use standard wait logic to
wait for child if started from a non-cygwin process.
* tlsoffsets.h: Regenerate.
* tty.cc (tty_init): Check for myself->cygstarted rather than
myself->ppid_handle to see if we were started by a cygwin process.
* include/sys/signal.h (external_pinfo::exitcode): Replace hProcess.
* include/sys/wait.h (WCOREDUMP): Define.
* fhandler_tty.cc (fhandler_tty_slave::read): Add debugging output for timeout
case.
* signal.cc (abort): Flag that we are exiting with the ABORT signal.
* pinfo.cc (pinfo::init): Don't consider MapViewOfFileEx error to be fatal if
exiting.
* pinfo.h (pinfo::init): Eliminate default argument and supply the argument in
the one case that needed it.
* cygtls.h (_cygtls::call_signal_handler): Rename from call_signal_handler_now.
(_cygtls::push): Make second argument mandatory.
(_cygtls::fixup_after_fork): Declare new function.
(_cygtls::lock): Ditto.
* cygtls.cc (_cygtls::fixup_after_fork): Define new function.
* dcrt0.cc (cygwin_finished_initializing): Define as bool.
(alloc_stack): Use _tlstop rather than arbitrary variable in probably vain
attempt to avoid strange fork problem on CTRL-C.
(dll_crt0_0): Remove obsolete winpids::init call.
* dll_init.cc (dll_dllcrt0): Detect forkee condition as equivalent to
initializing.
* winsup.h (cygwin_finished_initializing): Declare as bool.
* exceptions.cc (handle_exceptions): Rely on cygwin_finished_initializing to
determine how to handle exception during process startup.
(_cygtls::call_signal_handler): Rename from call_signal_handler_now.
(_cygtls::interrupt_now): Fill in second argument to push.
(signal_fixup_after_fork): Eliminate.
(setup_handler): Initialize locked to avoid potential inappropriate unlock.
Resume thread if it has acquired the stack lock.
(ctrl_c_handler): Just exit if ctrl-c is hit before cygiwn has finished
initializing.
* fork.cc (sync_with_child): Don't call abort since it can cause exit
deadlocks.
(sync_with_child): Change debugging output slightly.
(fork_child): Set cygwin_finished_initializing here. Call _cygtls fork fixup
and explicitly call sigproc_init.
(fork_parent): Release malloc lock on fork failure.
(vfork): Call signal handler via _my_tls.
* sigproc.cc (sig_send): Ditto.
* syscalls.cc (readv): Ditto.
* termios.cc (tcsetattr): Ditto.
* wait.cc (wait4): Ditto.
* signal.cc (nanosleep): Ditto.
(abort): Ditto.
(kill_pgrp): Avoid killing self if exiting.
* sync.cc (muto::acquire): Remove (temporarily?) ill-advised exiting_thread
check.
* gendef (_sigfe): Be more agressive in protecting stack pointer from other
access by signal thread.
(_cygtls::locked): Define new function.
(_sigbe): Ditto.
(_cygtls::pop): Protect edx.
(_cygtls::lock): Use guaranteed method to set eax to 1.
(longjmp): Aggressively protect signal stack.
* miscfuncs.cc (low_priority_sleep): Reduce "sleep time" for secs == 0.
* pinfo.cc (winpids::set): Counterintuitively use malloc's lock to protect
simultaneous access to the pids list since there are pathological conditions
which can cause malloc to call winpid.
(winpids::init): Eliminate.
* pinfo.h (winpids::cs): Eliminate declaration.
* pinfo.h (winpids::init): Eliminate definition.
(init_cheap::ctty): Change to pointer.
* dtable.h (dtable::find_archetype): Declare new function.
(dtable::add_archetype): Declare new function.
(dtable::delete_archetype): Declare new function.
(dtable::narchetypes): Declare.
(dtable::farchetypes): Declare.
(dtable::initial_archetype_size): Declare.
(dtable::dtable): Initialize new fields.
(dtable::initial_archetype_size): Declare.
* dtable.cc (dtable::find_archetype): Define new function.
(dtable::add_archetype): Define new function.
(dtable::delete_archetype): Define new function.
(dtable::initial_archetype_size): Define.
* fhandler.h (fhandler_base::archetype): Declare.
(fhandler_base::usecount): Declare.
* fhandler.cc (fhandler_base::fhandler_base): Initialize new fields.
* fhandler_console.cc (fhandler_console::get_tty_stuff): Pass NULL to third
argument of set_ctty.
* fhandler_tty.cc (fhandler_tty_slave::open): Accommodate new archetype method
to create only one instance of a tty.
(fhandler_tty_slave::close): Don't close handles unless archetype usecount is
zero. When that happens, close archetype too.
(fhandler_tty_slave::dup): Just copy archetype. Set use count appropriately.
Set ctty, if appropriate.
(fhandler_tty_common::dup): Remove slave considerations.
(fhandler_tty_common::set_close_on_exec): Remove cygheap->ctty considerations.
* pinfo.cc (_pinfo::set_ctty): Accommodate new archetype methods.
* pinfo.h (_pinfo::set_ctty): Make third argument explicit.
* syscalls.cc (close_all_files): Decrement controlling tty use count before
closing all handles to allow controlling tty to be closed. Remove previous
controlling tty considerations.
throughout.
* tty.cc (tty::common_init): Remove call to SetKernelObjectSecurity and edit
some comments.
* cygheap.h (init_cygheap::ctty): Add new element.
* devices.in (device::parse): Remove special handling for /dev/tty.
* devices.cc: Regenerate.
* dtable.cc (build_fh_pc): Don't reset /dev/tty device. Let the device opener
do that.
* fhandler_termios.cc (tty_min::set_ctty): Redefine to _pinfo class.
* fhandler_tty.cc (fhandler_tty_common::set_close_on_exec): Avoid setting
noninherit flag for ctty.
* tty.h: Move BOOLs to bools.
(tty_min::set_ctty): Redeclare to _pinfo class.
* pinfo.cc (_pinfo::set_ctty): Define new function based on tty_min::set_ctty.
Change first argument from tty number to tty_min class.
* pinfo.h (_pinfo::set_ctty): Declare.
* fhandler_console.cc (fhandler_console::get_tty_stuff): Reflect move of
set_ctty to _pinfo class.
* fhandler_tty.cc (fhandler_tty_slave::open): Treat FH_TTY specially. Use
saved cygheap value if it exists. Otherwise convert to real device and save on
first time open.
(fhandler_tty_common::dup): Potentially set controlling tty if duping a slave
tty.
* syscalls.cc (setsid): Close controlling tty in cygheap.
* tty.cc: Change some BOOLs to bools.
* exceptions.cc: Ditto.
* fhandler_termios.cc: Ditto.
* signal.cc: Ditto.
* sigproc.cc: Ditto.
* Makefile.in: Revert previous change which made a cygwin.din newer than a
version.h a warning rather than an error.
* devices.gperf: New file.
* devices.shilka: New file.
* cygwin-gperf: New file.
* cygwin-shilka: New file.
* fhandler_fifo.cc: New file.
* fhandler_nodevice.cc : New file. Reorganize headers so that path.h precedes
fhandler.h throughout. Remove device argument and unit arguments from fhandler
constructors throughout. Remove pc arguments to fhandler functions and use
internal pc element instead, throughout. Use dev element in pc throughout.
Use major/minor elements rather than units and device numbers previously in
fhandler class. Use correct methods for fhandler file names rather than
directly accessing file name variables, throughout.
* Makefile.in (DLL_OFILES): Add devices.o, fhandler_fifo.o
* dcrt0.cc (dll_crt0_1): Call device::init.
* devices.h: Renumber devices based on more Linux-like major/minor numbers.
Add more devices. Declare standard device storage.
(device): Declare struct.
* dir.cc (opendir): Use new 'build_fh_name' to construct a fhandler_* type.
* dtable.cc (dtable::get_debugger_info): Ditto.
(cygwin_attach_handle_to_fd): Ditto.
(dtable::release): Remove special FH_SOCKET case in favor of generic
"need_fixup_before" test.
(dtable::init_std_file_from_handle): Use either build_fh_dev or build_fh_name
to build standard fhandler.
(dtable::build_fh_name): Renamed from dtable::build_fhandler_from_name. Move
out of dtable class. Don't accept a path_conv argument. Just build it here
and pass it to:
(build_fh_pc): Renamed from dtable::build_fhandler. Move out of dtable class.
Use intrinsic device type in path_conv to create new fhandler.
(build_fh_dev): Renamed from dtable::build_fhandler. Move out of dtable class.
Simplify arguments to just take new 'device' type and a name. Just return
pointer to fhandler rather than trying to insert into dtable.
(dtable::dup_worker): Accommodate above build_fh name changes.
(dtable::find_fifo): New (currently broken) function.
(handle_to_fn): Use strechr for efficiency.
* dtable.h: Reflect above build_fh name changes and argument differences.
(fhandler_base *&operator []): Return self rather than copy of self.
* fhandler.cc (fhandler_base::operator =): Use pc element to set normalized
path.
(fhandler_base::set_name): Ditto.
(fhandler_base::raw_read): Use method to access name.
(fhandler_base::write): Correctly use get_output_handle rather than get_handle.
(handler_base::device_access_denied): New function.
(fhandler_base::open): Eliminate pc argument and use pc element of
fhandler_base throughout.
(fhandler_base::fstat): Detect if device is based in filesystem and use
fstat_fs to calculate stat, if so.
(fhandler_base::fhandler_base): Eliminate handling of file names and, instead,
just free appropriate component from pc.
(fhandler_base::opendir): Remove path_conv parameter.
* fhandler.h: Remove all device flags.
(fhandler_base::pc): New element.
(fhandler_base::set_name): Change argument to path_conv.
(fhandler_base::error): New function.
(fhandler_base::exists): New function.
(fhandler_base::pc_binmode): New function.
(fhandler_base::dev): New function.
(fhandler_base::open_fs): New function.
(fhandler_base::fstat_fs): New function.
(fhandler_base::fstat_by_name): New function.
(fhandler_base::fstat_by_handle): New function.
(fhandler_base::isfifo): New function.
(fhandler_base::is_slow): New function.
(fhandler_base::is_auto_device): New function.
(fhandler_base::is_fs_special): New function.
(fhandler_base::device_access_denied): New function.
(fhandler_base::operator DWORD&): New operator.
(fhandler_base::get_name): Return normalized path from pc.
(fhandler_base::get_win32_name): Return windows path from pc.
(fhandler_base::isdevice): Renamed from is_device.
(fhandler_base::get_native_name): Return device format.
(fhandler_fifo): New class.
(fhandler_nodevice): New class.
(select_stuff::device_specific): Remove array.
(select_stuff::device_specific_pipe): New class element.
(select_stuff::device_specific_socket): New class element.
(select_stuff::device_specific_serial): New class element.
(select_stuff::select_stuff): Initialize new elements.
* fhandler_disk_file.cc (fhandler_base::fstat_by_handle): Move to base class
from fhandler_disk_file.
(fhandler_base::fstat_by_name): Ditto.
(fhandler_base::fstat_by_name): Ditto.
(fhandler_disk_file::open): Move most functionality into
fhandler_base::open_fs.
(fhandler_base::open_fs): New function.
(fhandler_disk_file::close): Move most functionality into
fhandler_base::close_fs.
(fhandler_base::close_fs): New function.
* fhandler_mem.cc (fhandler_dev_mem::open): Use device name in debugging
output.
* fhandler_socket.cc (fhandler_socket::set_connect_secret): Copy standard
urandom device into appropriate place.
(fhandler_socket::accept): Reflect change in fdsock return value.
* fhandler_tty.cc: See "throughouts" above.
* net.cc: Accommodate fdsock change throughout.
(fdsock): Return success or failure, accept fd argument and device argument.
* path.cc (symlink_info::major): New element.
(symlink_info::minor): New element.
(symlink_info::parse_device): Declare new function.
(fs_info::update): Accommodate changes in path_conv class.
(path_conv::fillin): Ditto.
(path_conv::return_and_clear_normalized_path): Eliminate.
(path_conv::set_normalized_path): New function.
(path_conv::path_conv): Set info in dev element. Use path_conv methods Check
for FH_FS rather than FH_BAD to indicate when to fill in filesystem stuff.
where appropriate rather than direct access. Use set_normalized_path to set
normalized path.
(windows_device_names): Eliminate.
(get_dev): Ditto.
(get_raw_device_number): Ditto.
(get_device_number): Ditto.
(win32_device_name): Call new device name parser to do most of the heavy
lifting.
(mount_info::conv_to_win32_path): Fill in dev field as appropriate.
(symlink_worker): Handle new device files.
(symlink_info::check): Ditto.
(symlink_info::parse_device): Define new function.
* path.h (executable_states): Move here from fhandler.h.
(fs_info): Rename variables to *_storage and create methods for accessing same.
(path_conv): Add dev element, remove devn and unit and adjust inline methods to
accommodate.
(set_normalized_path): Declare new function.
* pinfo.cc (_pinfo::commune_recv): Add broken support for handling fifos.
(_pinfo::commune_send): Ditto.
* pipe.cc (fhandler_pipe::close): check for existence of handle before closing
it.
(handler_pipe::create): Rename from make_pipe. Change arguments to accept
fhandler_pipe array. Accommodate fifos.
(pipe): Rework to deal with fhandler_pipe::create changes.
(_pipe): Ditto.
* select.cc: Use individual device_specific types throughout rather than
indexing with obsolete device number.
(set_bits): Use is_socket call rather than checking device number.
* shared_info.h (CURR_MOUNT_MAGIC): Update.
(conv_to_win32_path): Reflect addition of device argument.
* syscalls.cc (mknod_worker): New function.
(open): Use build_fh_name to build fhandler.
(chown_worker): Detect if this is an 'auto' device rather than an on-filesystem
device and handle appropriately.
(chmod_device): New function.
(chmod): Detect if this is an 'auto' device rather than an on-filesystem device
and handle appropriately. Use chmod_device to set mode of in-filesystem
devices.
(stat_worker): Eliminate path_conv argument. Call build_fh_name to construct
fhandler. Use fh->error() rather than pc->error to detect errors in fhandler
construction.
(access_worker): New function pulled from access. Accommodate in-filesystem
devices.
(access): Use access_worker.
(fpathconf): Detect if this is an 'auto' device rather than an on-filesystem
device and handle appropriately.
(mknod_worker): New function.
(mknod32): New function.
(chroot): Free normalized path -- assuming it was actually cmalloced.
* tty.cc (create_tty_master): Tweak for new device class.
(tty::common_init): Ditto.
* winsup.h (stat_worker): Remove.
(symlink_worker): Declare.
* exceptions.cc (set_process_mask): Just call sig_dispatch_pending and don't
worry about pending_signals since sig_dispatch_pending should always do the
right thing now.
(sig_handle): Reorganize SIGCONT handling to more closely conform to SUSv3.
* pinfo.h: Move __SIG enum to sigproc.h.
(PICOM_FIFO): New enum element.
(_pinfo): Remove 'thread2signal' stuff throughout class.
(_pinfo::commune_send): Make varargs.
(_pinfo::sigtodo): Eliminate.
(_pinfo::thread2signal): Ditto.
* signal.cc (kill_worker): Eliminate call to setthread2signal.
* sigproc.cc (local_sigtodo): Eliminate.
(getlocal_sigtodo): Ditto.
(sigelem): New class.
(pending_signals): New class.
(sigqueue): New variable, start of sigqueue linked list.
(sigcatch_nonmain): Eliminate.
(sigcatch_main): Eliminate.
(sigcatch_nosync): Eliminate.
(sigcomplete_nonmain): Eliminate.
(pending_signals): Eliminate.
(sig_clear): Call signal thread to clear pending signals, unless already in
signal thread.
(sigpending): Call signal thread to get pending signals.
(sig_dispatch_pending): Eliminate use of pending_signals and just check
sigqueue.
(sigproc_terminate): Eliminate all of the obsolete semaphore stuff. Close
signal pipe handle.
(sig_send): Eliminate all of the obsolete semaphore stuff and use pipe to send
signals.
(getevent): Eliminate.
(pending_signals::add): New function.
(pending_signals::del): New function.
(pending_signals::next): New function.
(wait_sig): Eliminate all of the obsolete semaphore stuff. Use pipe to
communicate and maintain a linked list of signals.
* sigproc.h: Move __SIG defines here. Add __SIGPENDING.
(sig_dispatch_pending): Remove "C" specifier.
(sig_handle): Accept a mask argument.
* thread.cc: Remove signal handling considerations throughout.
(winpids::winpids): Rejigger to set pinfo_access.
* pinfo.cc (winpids::add): Try to open shared memory region with supplied
pinfo_access first, then default to readonly.
* fhandler_termios.cc (tty_min::kill_pgrp): When getting list of pids to work
with, suggest opening with PID_MAP_RW.
* signal.cc (kill_pgrp): Ditto.
* sigproc.cc (sig_send): Perform a write check on todo prior to attempting to
increment it. Return EACCES if we can't write to it.
* cygheap.h (cygheap_types): Add HEAP_SIGS.
* exceptions.cc (signal_fixup_after_exec): Remove from this file.
* pinfo.h (pinfo::getsig): Just return global_sigs array.
(pinfo::sigs): Delete.
* sigproc.cc (signal_fixup_after_exec): Move it here.
(global_sigs): New global array, moved from pinfo structure.
(sigalloc): New function. Allocate global sigaction array here.
(proc_subproc): Remove copysigs call. It's automatic now.
* include/sys/cygwin.h (PID_NOCLDSTOP): New value.
* signal.cc (sigaction): Set myself->PID_NODCLDSTOP when appropriate.
* sigproc.h (sigalloc): Declare.
* fnmatch.c (fnmatch): Use C90 parameters.
(rangematch): Ditto.
* fhandler.cc (fhandler_base::raw_read): Use right coercion to avoid a compiler
warning.
(winpids::init): New declaration.
(winpids::cs): Ditto.
(winpids::winpids): Use set rather than init.
* external.cc (fillout_pinfo): Ditto.
* dcrt0.cc (dll_crt0_1): Call winpids::init.
* pinfo.cc (winpids::set): Renamed from init. Wrap calls in critical section.
(winpids::init): New function.
(winpids::cs): Define.
* pinfo.h (SIGCOMMUNE): New signal type.
(commune_result): New structure for commune functions.
(picom): New enum for commune functions.
(_pinfo::hello_pid): New. Pid who's communicating with me.
(_pinfo::tothem): New. Handle of communicating pipe.
(_pinfo::fromthem): Ditto.
(_pinfo::commune_recv): Declare.
(_pinfo::commune_send): Declare.
(_pinfo::alive): Declare.
(_pinfo::cmdline): Declare.
(_pinfo::lock): Declare.
* pinfo.cc (set_myself): Initialize new _pinfo lock.
(_pinfo::alive): Define. Determines if process still exists.
(_pinfo::commune_recv): Define. Receive info from another cooperating process.
(_pinfo::commune_send): Define. Send info to another cooperating process.
(_pinfo::cmdline): Define. Determine command line of a given process.
* include/sys/cygwin.h (CW_CMDLINE): Define.
*sigproc.cc (talktome): Communicate with any processes who want to talk to me.
(wait_sig): Honor __SIGCOMMUNE.
* fhandler.cc (fhandler_virtual::fixup_after_exec): Declare.
* fhandler_proc.cc: Use malloc/free/realloc throughout rather than cmalloc
since buffers don't need to be propagated to subprocesses.
* fhandler_registry.cc: Ditto.
* fhandler_virtual.cc: Ditto.
(fhandler_virtual::fixup_after_exec): Define.
* fhandler_process.cc: Ditto for malloc/free/realloc.
(process_listin): Add "cmdline".
(fhandler_process::fill_filebuf): Implement PROCESS_CMDLINE.
* miscfuncs.cc (isalpha_array): New array populated with xor values for alpha
characters to switch from one case to another.
* string.h (cygwin_strcasematch): New asm implementation of case match.
* string.h (cygwin_nstrcasematch): New asm implementation of counted case
match.
(child_info_fork::mount_table): Remove.
(child_info_fork::myself_addr): Remove.
* fork.cc (fork_child): Don't set either of the above.
* dcrt0.cc (dll_crt0_1): Call memory_init as early as possible.
* fhandler_console.cc (console_state): Move to shared_info.h.
(fhandler_console::get_tty_stuff): Reflect open_shared arg change.
* pinfo.cc (myself_addr): Remove definition.
(pinfo::init): Get myself address from open_shared.
* pinfo.h (myself_addr): Remove declaration.
* shared.cc (open_shared): Rework so that known shared memory locations are
protected. Take shared memory type as fifth argument.
(memory_init): Reflect open_shared arg change.
* shared_info.h (shared_locations): New enum.
(console_state): Move here.
(open_shared): Reflect open_shared arg change in declaration.
(child_info_fork::heaptop): Remove obsolete element.
(child_info_fork::heabbase): Ditto.
(child_info_fork::heapptr): Ditto.
(child_info_fork::mount_table): New element.
(child_info_fork::myself_addr): Ditto.
* dcrt0.cc (dll_crt0_1): Set mount_table and myself_addr when forking.
(initial_env): Add newline to "sleeping" message.
* dll_init.cc (reserve_upto): Accommodate cygwin heap when freeing memory.
Make debugging output a little more descriptive.
* fork.cc (fork_parent): Save mount_table and myself_addr.
* pinfo.cc (myself_addr): New variable.
(set_myself): Pass PID_MYSELF flag to init.
(pinfo::Init): Honor PID_MYSELF. Save address where myself shared memory
resides in myself_addr, for fork.
* pinfo.h (myself_addr): Declare.
* shared.cc (memory_init): On fork, use previously saved address for location
of mount table.
* include/sys/cygwin.h (PID_MYSELF): New value.
* dtable.cc (dtable::stdio_init): Don't pass access type to
init_std_file_from_handle. It's always the same.
(dtable::init_std_file_from_handle): Remove access type argument. Assume
read/write.
* dtable.h (dtable::init_std_file_from_handle): Ditto for declaration.
* exceptions.cc (try_to_debug): Don't try to debug if already being debugged.
* fhandler_console.cc (shared_console_info_save): New variable.
(fhandler_console::get_tty_stuff): Save address of shared console stuff for
fork.
command-line setting.
* cygwin.din: Export sexec* functions as function which returns ENOSYS
(i.e., sexec* is deprecated).
* dtable.cc (dtable::vfork_child_dup): Ensure that impersonation is restored
even on failure.
* exec.cc: Throughout, remove references to sexec* and _spawnve.
* pinfo.h: Remove _spawnve declaration.
* spawn.cc: Rename _spawnve to spawnve and use throughout.
(spawn_guts): Eliminate hToken argument and processing of same. Just perform
special actions if impersonating.
(spawnve): Rename from _spawnve.
* fhandler.h (fhandler_proc::fill_filebuf): Take a pinfo argument.
* fhandler_proc.cc (fhandler_proc::get_proc_fhandler): Simplify search for
given pid.
(fhandler_proc::readdir): Assume that pid exists if it shows up in the winpid
list.
* fhandler_process.cc (fhandler_process::open): Simplify search for given pid.
Call fill_filebuf with pinfo argument.
(fhandler_process::fill_filebuf): Pass pinfo here and assume that it exists.
* pinfo.h (pinfo::remember): Define differently if sigproc.h is not included.
* dll_init.cc (dll_list::detach): Don't run destructor on exit.
(path_conv): Add normalized_path field.
* path.cc (path_conv::~path_conv): New destructor.
(path_conv::check): Set normalized_path, where appropriate.
* dtable.cc (build_fhandler_from_name): Use normalized path from path_conv.
* syscalls.cc (chroot): Ditto.
* cygheap.h: Remove path_prefix_p declaration. Christopher Faylor
<cgf@redhat.com> (minor fixups)
* Makefile.in: Add fhandler_proc.o, fhandler_registry.o, fhandler_process.o and
fhandler_virtual.o.
* dtable.cc (dtable::build_fhandler): Add entries for FH_PROC, FH_REGISTRY and
FH_PROCESS. Set unix_name to the normalized posix path.
* fhandler.h: Add constants for FH_PROC, FH_REGISTRY and FH_PROCESS. Add class
declarations for fhandler_virtual, fhandler_proc, fhandler_registry and
fhandler_virtual. Update fhandler_union accordingly.
* fhandler_proc.cc: New file. Add implementation for fhandler_proc.
* fhandler_virtual.cc: New file. Add implementation for fhandler_virtual.
* fhandler_process.cc: New file. Add implementation for fhandler_process.
* fhandler_registry.cc: New file. Add implementation for fhandler_registry.
* path.cc: Add isproc and isvirtual_dev macros.
* path.cc (path_conv::check): Add check for virtual devices.
* path.cc (mount_info::conv_to_win32_path): Convert paths in /proc to empty
Win32 paths.
* path.cc (chdir): Replace check for FH_CYGDRIVE with more generic
isvirtual_dev macro. Force setting of posix path for virtual fhandlers.
* path.h: Add externally visible path_prefix_p and normalized_posix_path
prototypes.
closing parent process handle. Call fixup_mmaps_after_fork()
with parent process handle as parameter.
* mmap.cc (mmap_record::access): New method.
(fixup_mmaps_after_fork): Take process handle as parameter.
In case of FILE_MAP_COPY access, copy valid memory regions to child.
* pinfo.h (fixup_mmaps_after_fork): Change prototype accordingly.
* Merged cygwin_daemon into head minus the new shm and ipc exports.
2002-02-28 Robert Collins <rbtcollins@hotmail.com>
* fhandler_tty.cc (fhandler_tty_slave::open): More debugging.
(fhandler_tty_slave::read): Fix printf type for the handle.
* tty.cc (tty::common_init): Add a FIXME for security.
2002-01-29 Robert Collins <rbtcollins@hotmail.com>
* Makefile.in (OBJS): Remove duplicate localtime.o.
2002-01-17 Robert Collins <rbtcollins@hotmail.com>
* cygserver.cc (check_and_dup_handle): Consolidate the two variants for
simplicity.
Add Some basic debug output.
(client_request_attach_tty::serve): Use the new debug_printf for clarity.
Mark the duplicated handles as inheritable - fixup_after_fork() doesn't reopen
tty's.
2002-01-16 Robert Collins <rbtcollins@hotmail.com>
* cygserver.cc (transport): Correct scope.
(client_request_attach_tty::serve): Add more debug information.
Fix erroneous use of transport instead of conn.
* cygserver_transport_pipes.cc (transport_layer_pipes::close): More debug.
(transport_layer_pipes::read): Ditto.
(transport_layer_pipes::write): Ditto.
(transport_layer_pipes::impersonate_client): Ditto.
Mon Oct 8 7:41:00 2001 Robert Collins <rbtcollins@hotmail.com>
* cygserver.cc (server_request::process): Rename client_request_shm_get to
client_request_shm.
* cygserver_process.cc (process_cache::add): Rename to add_task.
Use process_cleanup instead of process_request.
(process_cache::remove_process): New method.
(process::process): Initialize new members.
(process::~process): New member.
(process::cleanup): New method.
(process::add_cleanup_routine): New method.
(process_request::process): Rename to process_cleanup.
Call the process object's cleanup method and then delete it.
(process_process_param::request_loop): Remove the signalling process.
* cygserver_shm.cc: Globally rename client_request_shm_get to client_request_shm.
(client_request_shm_get::serve): Handle attach request counting.
* cygserver_shm.h: Globally rename client_request_shm_get to client_request_shm.
(class shm_cleanup): New class.
* shm.cc: Globally rename client_request_shm_get to client_request_shm.
(client_request_shm::client_request_shm): New constructor for attach requests.
(shmat): Use it.
* include/cygwin/cygserver_process.h (class process_request): Rename to
process_cleanup.
(class cleanup_routine): New class.
(class process): New members and methods to allow calling back when the process
terminates.
Thu Oct 4 14:12:00 2001 Robert Collins <rbtcollins@hotmail.com>
* cygserver.cc (request_loop): Make static.
(main): Use new cache constructor syntax.
Start cache worker threads.
Cleanup the cache at shutdown.
* cygserver_process.cc: Run indent.
(process_cache::process_cache): Add a trigger to use when adding a process.
(process_cache::process): Move process_entry to process.
Insert at the end of the list.
Trigger the request loop when new process's inserted.
(process_cache::process_requests): Do it.
(process_cache::add): New method.
(process_cache::handle_snapshot): New method.
(process::process): Merge in the process_entry fields.
(process::handle): Make a stub function.
(process::exit_code): New method.
(process_request::process): New method.
(process_process_param::request_loop): New method.
* cygserver_shm.cc: New header dependency - threaded_queue.h.
* threaded_queue.cc (threaded_queue::cleanup): Clearer messages.
(queue_process_param::stop): Short spinlock on interruptible threads.
* threaded_queue.h (class threaded_queue): New constructor.
* include/cygwin/cygserver_process.h (process_request): New class.
(process_entry): Remove.
(process): Merge in process_entry.
(process_cache): Inherit from threaded_queue.
Tue Oct 2 23:24:00 2001 Robert Collins <rbtcollins@hotmail.com>
* cygserver.cc (class server_process_param): Use new constructor syntax.
* cygserver_process.cc (process_cache::~process_cache): New function.
* threaded_queue.cc: Define condition debug_printf.
Run indent.
(threaded_queue::cleanup): Move queue_process_param guts to a method.
(threaded_queue::process_requests): Ditto.
(queue_process_param::queue_process_param): New method.
(queue_process_param::~queue_process_param): Ditto.
(queue_process_param::start): Ditto.
(queue_process_param::stop): Ditto.
* threaded_queue.h (class queue_process_param): Add support for
interruptible request loops.
* cygwin/include/cygwin/cygserver_process.h (class process_cache): Add
destructor.
Tue Oct 2 23:24:00 2001 Robert Collins <rbtcollins@hotmail.com>
* cygserver_client.cc: New flag allow_daemon to disable the daemon completely.
(cygserver_request): Check it.
(cygserver_init): Ditto.
* environ.cc (parse_thing): Add (no)daemon option.
Tue Oct 2 23:00:00 2001 Robert Collins <rbtcollins@hotmail.com>
* shm.cc: Update to handle include changes from HEAD.
Tue Oct 2 16:06:00 2001 Robert Collins <rbtcollins@hotmail.com>
* Makefile.in: Remove cygserver_shm.o from cygwin1.dll.
Rename cygserver_shm_outside.o to cygserver_shm.o.
* cygserver.cc (server_request::process): Use the new client_request
constructor.
* cygserver_client.cc: Remove the #ifdef's stubs for the server method
within cygwin.
(client_request_attach_tty::client_request_attach_tty): Use the new
client_request constructor.
(client_request_shutdown::client_request_shutdown): Ditto.
(client_request::client_request): Ditto.
* cygserver_shm.cc (client_request_shm_get::serve): Remove the
#ifdef'd stub for in-cygwin builds.
(client_request_shm_get::client_request_shm_get): Use the new
client_request constructor, and remove the in-cygwin variants.
* cygserver_shm.h (class client_request_shm_get): #ifndef test the
serve method - it's only used in cygserver.
* shm.cc (client_request_shm_get::client_request_shm_get): New function.
* include/cygwin/cygserver.h (request_header): New constructor.
(class client_request): Use it.
New constructor accepting the header size.
#ifndef test the server method - it's only used within cygserver.
(client_request_get_version): #ifdef test the server method.
(client_request_shutdown): Ditto.
(client_request_attach_tty): Ditto.
Tue Oct 2 9:57:00 2001 Robert Collins <rbtcollins@hotmail.com>
* Makefile.in: add threaded_queue.o to cygserver.exe.
* cygserver.cc: Include threaded_queue.h
(class server_request): Inherit from queue_request.
(class server_process_param): Inherit from queue_process_param.
(class server_request_queue): Inherit from threaded_queue.
(request_loop): Adjust for new types.
(server_request_queue::process_requests): Remove guts to
threaded_queue::process_requests.
(server_request::server_request): Adjust for new types.
(worker_function): Delete.
(server_request_queue::create_workers): Delete.
(server_request_queue::cleanup): Delete.
(server_request_queue::add): Move guts to threaded_queue::add.
* threaded_queue.cc: New file.
* threaded_queue.h: New file.
Mon Oct 1 12:38:00 2001 Robert Collins <rbtcollins@hotmail.com>
* cygserver.cc (client_request::serve): New function.
* cygserver_process.cc: Inlude <pthread.h> for pthread_once.
(process_cache::process_cache): Initialise a crtiical section for write access.
(process_cache::process): Use the critical section. Also add missing entries to
the cache.
(do_process_init): New function to initalise class process static variables.
(process::process): Ensure that the process access critical section is
initialised.
(process::handle): Close the handle of old process's when they have terminated
and we are returning the handle for a process with the same pid.
* cygserver_shm.cc: Run indent.
Include cygserver_process.h to allow process cache functionality.
(client_request_shm_get::serve): New parameter for process cache support.
Use the process cache, not OpenProcess to get a handle to the originating process.
Fix a handle leak with token_handle.
* cygserver_shm.h (class client_request_shm_get): Update ::serve for process
cache support.
* cygserver_transport_pipes.cc: Redefine debug_printf to be conditional on DEBUG.
* include/cygwin/cygserver.h: Do not implement client_request::serve in the
header.
* include/cygwin/cygserver_process.h (class process_cache): Add a write access
critical section to prevent races when requests from a multithreaded
application arrive.
Sun Sep 30 23:41:00 2001 Robert Collins <rbtcollins@hotmail.com>
* Makefile.in: Add cygserver_process.o to cygserver.exe.
* cygserver.cc: Include signal.h and cygwin_version.h.
Define debug_printf as a macro.
Define DEBUG to a value.
(client_request_attach_tty::serve): Add beginning of process cache support.
Change from #ifdef DEBUG to work with new DEBUG style.
(client_request_get_version::serve): Add beginning of process cache support.
(class server_request): New prototype for support of process cache.
(class queue_process_param): New class to allow request loop threading.
(class server_request_queue): Add beginning of process cache support.
Allow request loop threading.
(request_loop): Thread function for request loops.
(server_request_queue::process_requests): Initiator for threaded request loops.
(client_request_shutdown::serve): Add beginning of process cache support.
(server_request::server_request): Ditto.
(server_request::process): Use debug_printf. Add beginning of process cache
support.
(server_request_queue::cleanup): Kill off any request loop threads.
(server_request_queue::add): Add beginning of process cache support.
(handle_signal): Trigger a shutdown.
(main): Print out some useful info at startup - version, date time.
Add process cache support.
Spawn a separate thread for the transport request loop, thus allowing concurrent
support for multiple transports.
* cygserver_client.cc (client_request_get_version::serve): Add process cache
support.
(client_request_attach_tty::serve): Add process cache support.
(client_request_shutdown::serve): Add process cache support.
* cygsserver_process.cc: New file with the process cache support.
* cygserver_shm.cc: Redefine debug_printf to allow conditional output.
* cygwin.din: Export shmdt().
* shm.cc: Run indent.
Update FIXME's.
(shmdt): New function.
* include/cygwin/cygserver.h (class client_request): Add process cache support.
(class client_request_get_version): Ditto.
(class client_request_shutdown): Ditto.
(class client_request_attach_tty): Ditto.
* include/cygwin/cygserver_process.h: New header for process cache support.
Sun Sep 30 8:52:00 2001 Robert Collins <rbtcollins@hotmail.com>
* include/cygwin/cygserver_transport.h: Add copyright header.
* include/cygwin/cygserver_transport_pipes.h: Ditto.
* include/cygwin/cygserver_transport_sockets.h: Ditto.
Sat Sep 29 20:40:00 2001 Robert Collins <rbtcollins@hotmail.com>
* Makefile.in: Add cygserver_transport_sockets.o to DLL_OFILES.
Add cygserver_transport_sockets_outside.o to cygserver.exe.
* cygserver.cc: Include new include files.
* cygserver_client.cc: Ditto.
* cygserver_shm.h: No need to include <sys/socket.h> now.
* cygerver_transport.cc: Include new include files.
(transport_layer_base::transport_layer_base): Strip back to a stub.
(transport_layer_base::listen): Ditto.
(transport_layer_base::accept): Ditto.
(transport_layer_base::close): Ditto.
(transport_layer_base::read): Ditto.
(transport_layer_base::write): Ditto.
(transport_layer_base::connect): Ditto.
* cygserver_transport_pipes.cc: Include new header
"cygwin/cygserver_transport_pipes.h".
* cygserver_transport_sockets.cc: New file.
* dcrt0.cc: No need to include <sys/socket.h> now.
* fhandler_tty.cc: Ditto.
* tty.cc: Ditto.
* include/cygwin/cygserver_transport.h: Strip the base class to a stub.
Remove the cygserver_transport_pipes class.
* include/cygwin/cygserver_transport_pipes.h: New file.
* include/cygwin/cygserver_transport_sockets.h: New file.
Tue Sep 25 16:22:00 2001 Robert Collins <rbtcollins@hotmail.com>
* autoload.cc: Add dynamic load statement for 'ImpersonateNamedPipeClient'.
* Makefile.in: Add new object files, and build instructions for cygserver.exe.
* cygwin.din: Export ftok, shmat, shmctl and shmget.
* dcrt0.cc: Additional includes for cygserver support.
(dll_crt0_1): Initialise the cygserver client.
* fhandler.h (fhandler_tty): New method cygserver_attach_tty.
* fhandler_tty.cc: Additional includes for cygserver support.
(fhandler_tty_slave::open): Attempt to use the cygserver when obtaining
handles from the parent process. On failure or 9x use the current method.
(fhandler_tty_slave::cygserver_attach_tty): New function.
* fork.cc (fork_child): Fixup shm memory mapped areas.
* pinfo.h: Declare fixup_shms_after_fork().
* security.h: Declare alloc_sd().
* tty.cc: Additonal includes to support cygserver.
(tty::common_init): Don't allow others to open us if the cygserver is running.
* winsup.h: Declare cygserver_running.
* cygserver.cc: New file.
* cygserver_client.cc: New file.
* cygserver_shm.cc: New file.
* cygserver_shm.h: New file.
* cygserver_transport.cc: New file.
* cygserver_transport_pipes.cc: New file.
* ipc.cc: New file.
* shm.cc: New file.
* include/cygwin/cygserver.h: New file.
* include/cygwin/cygserver_transport.h: New file.
* include/sys/ipc.h: New file.
* include/sys/shm.h: New file.
2002-02-28 Robert Collins <rbtcollins@hotmail.com>
* thread.cc (semaphore::TryWait): Set errno as required by posix 1003.1.
(__sem_wait): Ditto.
(__sem_trywait): Ditto.
* dcrt0.cc (set_os_type): Set 'iswinnt' appropriately.
* cygheap.cc (init_cheap): Revert to using VirtualAlloc for allocating cygheap.
(cygheap_setup_for_child_cleanup): New function. Standard function to call
after calling CreateProcess to cleanup cygheap info passed to child.
(cygheap_fixup_in_child): Copy cygheap from shared memory into allocated space
under Windows 9x or if can't relocate shared space under NT.
* cygheap.h: Declare new function.
* spawn.cc (spawn_guts): Use cygheap_fixup_in_child.
* fork.cc (fork_parent): Ditto.
* winsup.h: Declare iswinnt.
* pinfo.h: Correctly set __SIGOFFSET.
* path.cc (hash_path_name): Avoid calling library functions for simple copying
of characters.
* shortcut.c: Use WIN32_LEAN_AND_MEAN.
* smallprint.c: Ditto.
* environ.cc (getwinenv): Minor clarity fix.
* localtime.c: No need to include windows.h
* string.h: New file.
* exceptions.cc (setup_handler): Clarify debugging message.
* sigproc.cc (proc_subproc): Remove PROC_CHILDSTOPPED test. It is handled by
normal PROC_CLEARWAIT case.
(wait_sig): Eliminate "dispatched" tracking. Remove __SIGCHILDSTOPPED test.
Decrement counter again before jumping out of InterlockedDecrement loop so that
subsequent InterlockedIncrement will keep the counter at the correctly
decremented value and also detect when there are pending signals.
* sigproc.h: Remove __SIGCHILDSTOPPED element.
(procstuff): Remove PROC_CHILDSTOPPED element.
Christopher Faylor
Robert Collins
Pierre Humblet
Corinna Vinschen