2005-12-05 Paolo Bonzini <bonzini@gnu.org>
Sync with gcc:
2005-12-05 Paolo Bonzini <bonzini@gnu.org>
* configure.in (CONFIGURED_BISON, CONFIGURED_YACC, CONFIGURED_M4,
CONFIGURED_FLEX, CONFIGURED_LEX, CONFIGURED_MAKEINFO): Remove
"CONFIGURED_" from the AC_CHECK_PROGS invocation. Move below.
Find in-tree tools if available.
(EXPECT, RUNTEST, LIPO, STRIP): Find them and substitute them.
(CONFIGURED_*_FOR_TARGET): Don't set nor substitute.
(*_FOR_TARGET): Set them with GCC_TARGET_TOOL.
(COMPILER_*_FOR_TARGET): New.
* Makefile.tpl (HOST_EXPORTS): Add *_FOR_TARGET symbols that gcc needs.
(BASE_TARGET_EXPORTS): Use COMPILER_*_FOR_TARGET symbols.
(CONFIGURED_*, USUAL_*): Remove.
(BISON, YACC, FLEX, LEX, M4, MAKEINFO, EXPECT, RUNTEST, LIPO,
STRIP): Use autoconf substitutions.
(COMPILER_AS_FOR_TARGET, COMPILER_LD_FOR_TARGET,
COMPILER_NM_FOR_TARGET): New.
(EXTRA_HOST_FLAGS): Pass LIPO and STRIP.
(all): Make all-host and all-target in parallel.
(do-[+make_target+], do-check, install, [+compare-target+]): Ensure
that $$r and $$s are set before invoking a recursive make.
(stage[+id+]-bubble): Likewise, and invoke the comparison at the end.
([+bootstrap-target+]): Inline most of the `all' target.
2005-11-29 Ben Elliston <bje@au.ibm.com>
* Makefile.tpl (clean-target-libgcc): Invoke clean-target-libgcc
from the gcc build directory.
* Makefile.in: Regenerate.
2005-11-29 Ben Elliston <bje@au.ibm.com>
* Makefile.def: Add new libdecnumber host_module. Make all-gcc
depend on all-libdecnumber.
* configure.in (host_libs): Include libdecnumber.
* Makefile.in: Regenerate.
* configure: Likewise.
2005-11-21 Kean Johnston <jkj@sco.com>
* config.sub, config.guess: Sync from upstream sources.
config:
2005-12-05 Paolo Bonzini <bonzini@gnu.org>
* acx.m4 (GCC_TARGET_TOOL): New.
* Makefile.tpl (CONFIGURE_GDB_TK, INSTALL_GDB_TK): New variables.
(configure-gdb, install-gdb): New rules.
* configure.in: Set CONFIGURE_GDB_TK and INSTALL_GDB_TK.
* Makefile.in, configure: Regenerated.
PR bootstrap/24297
* Makefile.tpl (do-[+make-target+], do-check, install,
stage[+id+]-bubble, [+compare-target+]): Ensure $$r and $$s
are set before recursing.
* Makefile.in: Regenerate.
PR bootstrap/22340
* configure.in (default_target): Remove.
* Makefile.tpl (all): Do not use prerequisites as subroutines
(all) [gcc-bootstrap]: Bootstrap gcc first if it was not done yet.
(do-[+make_target+], check, install, [+bootstrap_target+]): Do not
use prerequisites as subroutines.
(check-host, check-target): New.
(bootstrap configure & all targets): Do not use stage*-start
if the directory layout is already ok.
(non-bootstrap configure & all targets): Prepend a $(unstage).
(stage[+id+]-bubble): Do that here. Do not use NOTPARALLEL.
(NOTPARALLEL): Remove.
(unstage, stage variables): New variables.
(unstage, stage targets): Simply expand to those variables.
* configure: Regenerate.
* Makefile.in: Regenerate.
* configure.in (powerpc-*-aix*): Add target-libssp to noconfigdirs.
(rs6000-*-aix*): Same.
* configure: Regenerate.
2005-09-14 Francois-Xavier Coudert <coudert@clipper.ens.fr>
* configure.in: Recognize f95 in the --enable-languages option,
and substitute it for fortran, issuing a warning.
* configure: Regenerate.
2005-09-06 Paul Eggert <eggert@cs.ucla.edu>
* move-if-change: Don't output "$2 is unchanged"; suggested by Ben
Elliston. Handle weird characters correctly.
2005-08-12 Paolo Bonzini <bonzini@gnu.org>
* configure.in: Replace NCN_STRICT_CHECK_TOOL with
NCN_STRICT_CHECK_TOOLS, and likewise for NCN_STRICT_CHECK_TARGET_TOOLS.
Look for alternate names of the target cc and c++
config:
2005-08-12 Paolo Bonzini <bonzini@gnu.org>
* config/acx.m4 (NCN_CHECK_TARGET_TOOL, NCN_STRICT_CHECK_TOOL,
NCN_STRICT_CHECK_TARGET_TOOL): Remove.
(NCN_STRICT_CHECK_TOOLS, NCN_STRICT_CHECK_TARGET_TOOLS): New,
2005-07-14 Jim Blandy <jimb@redhat.com>
* configure.in: Add cases for Renesas m32c.
* configure: Regenerated.
bfd/ChangeLog:
2005-07-14 Jim Blandy <jimb@redhat.com>
Add support for m32c-*-elf (Renesas m32c and m16c).
* Makefile.am (ALL_MACHINES): Add cpu-m32c.lo.
(ALL_MACHINES_CFILES): Add cpu-m32c.c.
(BFD32_BACKENDS): Add elf32-m32c.lo.
(BFD32_BACKENDS_CFILES): Add elf32-m32c.c.
(cpu-m32c.lo, elf32-m32c.lo): New rules, generated by 'make dep-am'.
* Makefile.in: Regenerated.
* archures.c (bfd_arch_m32c, bfd_mach_m16c, bfd_mach_m32c): New
arch and mach codes.
(bfd_m32c_arch): New arch info object.
(bfd_archures_list): List bfd_m32c_arch.
* bfd-in2.h: Regenerated.
* config.bfd: Add case for the m32c.
* configure.in: Add case for the m32c.
* configure: Regenerated.
* cpu-m32c.c, elf32-m32c.c: New files.
* libbfd.h: Regenerated.
* targets.c (bfd_elf32_m32c_vec): Declare.
(_bfd_target_vector): List bfd_elf32_m32c_vec.
binutils/ChangeLog:
2005-07-14 Jim Blandy <jimb@redhat.com>
* readelf.c: #include "elf/m32c.h"
(guess_is_rela, dump_relocations, get_machine_name): Add cases for
EM_M32C.
* Makefile.am (readelf.o): Update dependencies.
* Makefile.in: Regenerated.
cpu/ChangeLog:
2005-07-14 Jim Blandy <jimb@redhat.com>
* m32c.cpu, m32c.opc: Machine description for the Renesas M32C.
gas/ChangeLog:
2005-07-14 Jim Blandy <jimb@redhat.com>
Add support for the Renesas M32C.
* Makefile.am (CPU_TYPES): List m32c.
(TARGET_CPU_CFILES): List config/tc-m32c.c.
(TARGET_CPU_HFILES): List config/tc-m32c.h.
* configure.in: Add case for m32c.
* configure.tgt: Add cases for m32c and m32c-*-elf.
* configure: Regenerated.
* config/tc-m32c.c, config/tc-m32c.h: New files.
* doc/Makefile.am (CPU_DOCS): Add c-m32c.texi.
* doc/Makefile.in: Regenerated.
* doc/all.texi: Set M32C.
* doc/as.texinfo: Add text for the M32C-specific options and line
comment characters, and refer to c-m32c.texi.
* doc/c-m32c.texi: New file.
include/ChangeLog:
2005-07-14 Jim Blandy <jimb@redhat.com>
* dis-asm.h (print_insn_m32c): New declaration.
include/elf/ChangeLog:
2005-07-14 Jim Blandy <jimb@redhat.com>
Add support for Renesas M32C and M16C.
* common.h (EM_M32C): New machine number.
* m32c.h: New file.
ld/ChangeLog:
2005-07-14 Jim Blandy <jimb@redhat.com>
Add support for the Renesas M32C and M16C.
* Makefile.am (ALL_EMULATIONS): Add eelf32m32c.o.
(eelf32m32c.c): New target.
* Makefile.in: Regenerated.
* configure.tgt: Add case for m32c-*-elf.
* emulparams/elf32m32c.sh: New file.
opcodes/ChangeLog:
2005-07-14 Jim Blandy <jimb@redhat.com>
Add support for the Renesas M32C and M16C.
* m32c-asm.c, m32c-desc.c, m32c-dis.c, m32c-ibld.c, m32c-opc.c: New.
* m32c-desc.h, m32c-opc.h: New.
* Makefile.am (HFILES): List m32c-desc.h and m32c-opc.h.
(CFILES): List m32c-asm.c, m32c-desc.c, m32c-dis.c, m32c-ibld.c,
m32c-opc.c.
(ALL_MACHINES): List m32c-asm.lo, m32c-desc.lo, m32c-dis.lo,
m32c-ibld.lo, m32c-opc.lo.
(CLEANFILES): List stamp-m32c.
(M32C_DEPS): List stamp-m32c, if CGEN_MAINT.
(CGEN_CPUS): Add m32c.
(m32c-asm.c, m32c-desc.c, m32c-dis.c, m32c-ibld.c, m32c-opc.c)
(m32c-desc.h, m32c-opc.h): Depend on M32C_DEPS.
(m32c_opc_h): New variable.
(stamp-m32c, m32c-asm.lo, m32c-desc.lo, m32c-dis.lo, m32c-ibld.lo)
(m32c-opc.lo): New rules.
* Makefile.in: Regenerated.
* configure.in: Add case for bfd_m32c_arch.
* configure: Regenerated.
* disassemble.c (ARCH_m32c): New.
[ARCH_m32c]: #include "m32c-desc.h".
(disassembler) [ARCH_m32c]: Add case for bfd_arch_m32c.
(disassemble_init_for_target) [ARCH_m32c]: Same.
* cgen-ops.h, cgen-types.h: New files.
* Makefile.am (HFILES): List them.
* Makefile.in: Regenerated.
<mmix-knuth-mmixware>: Set unsupported_languages. Name explicit
non-ported target libraries in noconfigdirs.
<cris-*, crisv32-*> Ditto, except for non-aout, non-elf,
non-linux-gnu. Remove libgcj_ex_libffi.
<lang_frag loop>: Set add_this_lang=no if the language is in
unsupported_languages.
* configure: Regenerate.
* Makefile.tpl (stage[+id+]-start): Iterate over target module as well.
(Dependencies): Consider target modules for bootstrap dependencies.
Make target bootstrap modules depend on each stage's gcc.
* Makefile.in: Regenerate.
Sync from gcc:
2005-04-22 Bernd Schmidt <bernd.schmidt@analog.com>
* config.sub: Update from master copy.
2005-04-19 Hans-Peter Nilsson <hp@axis.com>
* configure.in <crisv32-*-*, cris-*-*>: New local variable
libgcj_ex_libffi. Have specific match for *-*-linux*. Separate
matches for "*-*-aout" and "*-*-elf". Don't disable libffi for
"*-*-elf" and "*-*-linux*".
* configure: Regenerate.
config:
2005-04-29 Paolo Bonzini <bonzini@gnu.org>
* acx.m4 (ACX_PROG_GNAT): Remove stray break.
* Makefile.tpl (BUILD_CONFIGARGS): Include --with-build-subdir.
(TARGET_CONFIGARGS): Include --with-target-subdir.
(configure, all): New macros. Use them throughout.
* Makefile.def: Remove libstdcxx_incdir, libsubdir, gxx_include_dir,
gcc_version, and gcc_version_trigger from set of flags to pass.
* Makefile.tpl: Remove definitions of above variables.
(config.status): Remove dependency on $(gcc_version_trigger).
* Makefile.in: Regenerate.
* configure.in: Do not reference config/gcc-version.m4 nor
config/gxx-include-dir.m4. Do not invoke TL_AC_GCC_VERSION nor
TL_AC_GXX_INCLUDE_DIR. Do not set gcc_version_trigger.
* configure: Regenerate.
config:
* gxx-include-dir.m4: In all substitutions, leave $(gcc_version)
to be expanded by the Makefile.
Sync from gcc.
2005-02-28 Paolo Bonzini <bonzini@gnu.org>
PR bootstrap/17383
* Makefile.def (target_modules): Remove "stage", now unnecessary.
* Makefile.tpl (HOST_SUBDIR): New substitution.
(STAGE_HOST_EXPORTS, EXPECT, HOST_LIB_PATH, USUAL_AR_FOR_TARGET,
USUAL_AS_FOR_TARGET, USUAL_DLLTOOL_FOR_TARGET, USUAL_GCC_FOR_TARGET,
USUAL_LD_FOR_TARGET, USUAL_NM_FOR_TARGET, USUAL_OBJDUMP_FOR_TARGET,
USUAL_RANLIB_FOR_TARGET, USUAL_WINDRES_FOR_TARGET): Use it.
(Host modules, Bootstrapped modules): Use it.
(Build modules, Target modules): Do not create symlink trees,
always configure out-of-srcdir.
(distclean): Try removing $(host_subdir) with rm before using rm -rf.
* configure.in (FLAGS_FOR_TARGET, CC_FOR_TARGET, GCJ_FOR_TARGET,
GFORTRAN_FOR_TARGET, CXX_FOR_TARGET, RAW_CXX_FOR_TARGET): Use
$(HOST_SUBDIR). Create a symlink for host_subdir.
* Makefile.in: Regenerate.
* configure: Regenerate.
Merged from libada-gnattools-branch:
2004-11-28 Nathanael Nerode <neroden@gcc.gnu.org>
* Makefile.def: Add gnattools as a module, depending on target-libada.
* Makefile.in: Regenerate.
* configure.in: Include gnattools in host_tools; disable it if ada
is disabled.
* configure: Regenerate.
config:
2005-02-28 Paolo Bonzini <bonzini@gnu.org>
PR bootstrap/17383
* acx.m4 (GCC_TOPLEV_SUBDIRS): Set HOST_SUBDIR if an in-src
gcc build is going.
PR bootstrap/17383
* Makefile.def (target_modules): Remove stage parameter,
it is always true now.
* Makefile.tpl (configure-build-[+module+],
configure-target-[+module+]): Always build symlink tree
for the directory and for include. BUILD_SUBDIR and
TARGET_SUBDIR cannot be . anymore.
* Makefile.in: Regenerate.
* configure.in: Remove all instances of build-fixincludes from
noconfigdirs.
(build_configargs): Supply --target to subdirectories.
* configure: Regenerate.
* Makefile.def: Make gcc install depend on fixincludes install.
* Makefile.in: Regenerate.
2004-09-23 Kelley Cook <kcook@gcc.gnu.org>
* config.guess: New upstream version
* compile, depcomp, install-sh, ylwrap: Likewise.
2004-09-19 Roger Sayle <roger@eyesopen.com>
* config/mh-x86omitfp: New host makefile fragment. Add
-fomit-frame-pointer to the default BOOT_CFLAGS.
* configure.in: Use it to speed up bootstrap on some IA-32 hosts.
* configure: Regenerate.
2004-09-15 Andrew Pinski <pinskia@physics.uc.edu>
PR target/11572
* configure.in (*-*-darwin*): Renable libobjc.
* configure: Regenerate.
* Makefile.def (bootstrap stages): Add 'lean' parameter.
* Makefile.tpl (configure-stageN-*, all-stageN-*): Turned into
phony targets; do not generate timestamp files.
(distclean-stageN): Remove references to their timestamp files.
(restageN, touch-stageN): Remove.
(stageN-bubble): Rewritten.
(compare): Support lean bootstraps.
* Makefile.in: Regenerate.
* configure.in: Only warn when bootstrapping but
build != host or build != target. Support lean bootstraps.
* configure: Regenerate.
Sync from gcc:
2004-08-26 Phil Edwards <phil@codesourcery.com>
* configure.in: Give a better error message if GMP/MPFR are missing
and a language needing them has been requested.
* configure: Regenerated.
2004-08-25 Phil Edwards <phil@codesourcery.com>
* configure.in: Print a list of available language front-ends if
a requested one is missing. Tidy stray tab characters.
* configure: Regenerated.
* Makefile.in: Regenerate.
* configure: Regenerate.
* Makefile.def (bootstrap-stage): Rename extra_*_flags to
stage_*_flags.
* Makefile.tpl (configure-[+module+], all-[+module+]): Exit
for bootstrapped modules if toplevel bootstrap is going.
(GCC bootstrap): Generate per-stage targets for all bootstrapped
modules. Adjust for changes in Makefile.def. Enable several
rules even in non-bootstrap mode, just to avoid peppering the
template with unnecessary "@if/@endif gcc-bootstrap" pairs.
(stage-[+prev+]-bubble): Remove.
* Makefile.def (Dependencies): Depend on all-build-bison,
all-build-flex, all-build-byacc, all-build-texinfo, rather
than the host variations.
* Makefile.tpl (BUILD_DIR_PREFIX): Remove. Replace throughout
with BUILD_SUBDIR.
(BISON): Update for recent Bisons.
(YACC): Fix typo.
(cross): Depend on all-build.
(all): Do not depend on all-build.
(prebootstrap): Remove.
(dep-kind): Accept separate prefixes for MODULE and ON variables.
(Prebootstrap dependencies): Add them to the per-stage targets
and to all-prebootstrap.
* configure.in (build_configdirs): Always enable build_tools.
(BUILD_DIR_PREFIX): Remove.
* Makefile.def (gcc): Add target variable.
(gdb, expect, guile, tk, tix): Replace with_x with extra_make_flags.
* Makefile.tpl (Autogenerated `all-*' targets): Invoke $(TARGET-*)
in the recursive `make', instead of hardwiring `all'.
(Autogenerated TARGET-* variables): New.
2004-08-09 Mark Mitchell <mark@codesourcery.com>
* configure.in (arm*-*-eabi*): New target.
* configure: Regenerate.
2004-08-03 Paul Brook <paul@codesourcery.com>
* configure.in: Check for MPFR as well as GMP.
* configure: Regenerate.
2004-08-01 Robert Millan <robertmh@gnu.org>
* configure.in: Turn mt-linux into mt-gnu. Use mt-gnu and enable
libmudflap for all GNU-based systems (with Glibc).
* configure: Regenerate.
* Makefile.def (bfd, opcodes, gcc, zlib): Mark as bootstrap module.
(bison, byacc, flex, texinfo): Do not mark as bootstrap module.
(Dependencies): New section.
* Makefile.tpl (Dependencies): Generate from Makefile.def.
(configure-target-[+module+]): Depend on maybe-all-gcc
(all-prebootstrap): New name of all-bootstrap. Changed throughout.
(toplevel profiledbootstrap): Fix dependencies.
* Makefile.in: Regenerate.
* Makefile.def (host-modules): Add gcc.
* Makefile.in: Regenerate.
* Makefile.tpl (sorry): New rule.
(configure-host, all-host, [+make_target+]-host, do-check,
install-host): Do not add gcc as a special case.
(host modules): Add a small special-casing for gcc. Export
extra_make_flags through the environment.
(maybe-configure-gcc, configure-gcc, maybe-all-gcc, all-gcc,
maybe-check-gcc, check-gcc, maybe-install-gcc, install-gcc,
other recursive targets for gcc): Remove.
(all, do-[+make_target+], do-check): Wrap between unstage and stage.
(stage, unstage): New rules.
(stage[+id+]-start, stage[+id+]-end, [+compare-target+],
distclean-stage[+id+]): Use stage_current.
([+bootstrap-target+], profiledbootstrap): Do not invoke manually
the stage*-start rules.
* configure.in: Add noconfigdirs for crx-*-*.
* configure: Regenerate.
2004-07-09 Loren J. Rittle <ljrittle@acm.org>
* configure.in: Build libmudflap by default on FreeBSD.
* configure: Regenerated.
2004-07-09 Mark Mitchell <mark@codesourcery.com>
* configure.in: Do not build libmudflap by default on non-GNU/Linux
systems.
* configure: Regenerated.
2004-07-08 John David Anglin <dave.anglin@nrc-cnrc.gc.ca>
PR target/16344
* Makefile.tpl (profiledbootstrap): Build runtime libraries with
feedback based compiler.
* Makefile.in: Rebuilt.
2004-07-05 Phil Edwards <phil@codesourcery.com>
* configure.in: Do not prepend $srcdir to /dev/null in
makefile fragments.
* configure: Regenerate.
* Makefile.def (build_modules): Add bison, byacc, flex,
m4, texinfo.
(flags_to_pass): Add FLEX.
* Makefile.tpl (BUILD_DIR_PREFIX, BASE_EXPORTS): New.
(BUILD_EXPORTS, HOST_EXPORTS, BASE_TARGET_EXPORTS): Include it.
(DEFAULT_YACC, USUAL_YACC, DEFAULT_LEX, USUAL_LEX, DEFAULT_M4,
DEFAULT_MAKEINFO): Remove.
(CONFIGURED_YACC, CONFIGURED_FLEX, CONFIGURED_BISON,
CONFIGURED_LEX, CONFIGURED_M4, CONFIGURED_MAKEINFO): Substitute.
(YACC, FLEX, BISON, LEX, M4, MAKEINFO): Define to look into
objdir or else use configured tool.
(all-build): New.
(all): Depend on it.
(Build module dependencies): Add.
* Makefile.in: Regenerate.
* configure.in: Better support for multiple build modules,
matching what is done for host/target modules. Do not look
for "plausible" locations of build tools if Canadian cross.
Use autoconf's AC_PROG_CC to find a C compiler. Define
BUILD_DIR_PREFIX. Look for flex, makeinfo and m4.
* configure: Regenerate.
* Makefile.tpl (touch-stage[+id+]): New.
(restage[+prev+]): Depend on touch-stage[+id+].
* Makefile.tpl (RECURSE_FLAGS_TO_PASS): New.
Use it throughout.
* Makefile.def: Add profile and feedback bootstrap stages.
Remove next field from bootstrap stages.
* Makefile.tpl (LN, LN_S): Substitute.
(stageN-start, stageN-end): Use double-colon rules, to
provide a hook for additional setup commands.
(distclean-stageN-gcc, restageN): Create dependencies from
[+prev+], not from [+next+].
(stageN-bubble): Add commands for successive stages from
[+prev+], using double-colon rules.
(all-stageN-gcc): Fix typo.
(stagefeedback-start, profiledbootstrap): New.
* Makefile.in: Regenerate.
* configure.in: Call ACX_PROG_LN.
* configure: Regenerate.
config/ChangeLog:
2004-06-09 Paolo Bonzini <bonzini@gnu.org>
* acx.m4 (ACX_PROG_LN): From gcc, modified to
accept a parameter.
Merge this patch from the gcc tree:
2004-05-30 Andreas Jaeger <aj@suse.de>
Jim Wilson <wilson@specifixinc.com>
* config-ml.in: Pass FFLAGS and ADAFLAGS for multilibs, handle F77
like CC.
* Makefile.tpl (all.normal): Rename to all.
(all): Replace with a rule to pick the default
target from configure.
(all-gcc, configure-gcc): Use conditionals to
do nothing when toplevel bootstrap is going on.
(GCC directory bootstrap) [gcc-bootstrap]: Disable.
(Toplevel bootstrap) [gcc-no-bootstrap]: Disable.
* configure.in: Support --enable-bootstrap.
* Makefile.def: Remove new- prefix from toplevel
bootstrap targets.
* Makefile.tpl: Likewise.
* Makefile.def: Add bootstrap_stage 4. Add bootstrap2
target.
* Makefile.tpl (Toplevel bootstrap): Pass $(BASE_FLAGS_TO_PASS)
$(RECURSE_FLAGS) to recursive invocation of make.
* Makefile.in: Regenerate.
* configure: Regenerate.
(STAGE_HOST_EXPORTS, BASE_TARGET_EXPORTS, RAW_CXX_TARGET_EXPORTS)
(NORMAL_TARGET_EXPORTS): New macros. Use them in all the recursive
targets.
* Makefile.in: Regenerate.
2004-04-27 Paolo Bonzini <bonzini@gnu.org>
Revert:
2004-04-26 Paolo Bonzini <bonzini@gnu.org>
* Makefile.def (flags_to_pass): Remove *dir variables that
are passed to the modules via TOPLEVEL_CONFIGURE_ARGUMENTS,
as well as prefix and exec_prefix.
* Makefile.in: Regenerate.
2004-04-26 Paolo Bonzini <bonzini@gnu.org>
* Makefile.def (host_modules): Mark with the bootstrap
flag packages on which gcc depends.
* Makefile.tpl (all-bootstrap): Use it.
* Makefile.in: Regenerate.
2004-04-26 Paolo Bonzini <bonzini@gnu.org>
* Makefile.def (flags_to_pass): Remove *dir variables that
are passed to the modules via TOPLEVEL_CONFIGURE_ARGUMENTS,
as well as prefix and exec_prefix.
* Makefile.in: Regenerate.
2004-04-26 Paolo Bonzini <bonzini@gnu.org>
* configure.in: Invoke ACX_PROG_CMP_IGNORE_INITIAL.
* configure: Regenerate.
* config/acx.m4: Mutuate ACX_PROG_CMP_IGNORE_INITIAL from gcc.
* gcc/Makefile.tpl (compare): Use the result of the test.
* gcc/Makefile.in: Regenerate.
2004-04-23 Paolo Bonzini <bonzini@gnu.org>
* Makefile.tpl (all-stage1-gcc, all-stage2-gcc, all-stage3-gcc):
Always relocate gcc and prev-gcc to the original names, even
if the build fails.
(new-cleanstrap, new-restage1, new-restage2, new-restage3):
New targets.
PR bootstrap/14871
* Makefile.tpl: If we don't have built-in-tree target tools,
use the ones found by configure rather than hacking around with
program_transform_name.
* configure.in: Give Makefile.tpl the information necessary
to do that.
* Makefile.in: Regenerate.
* configure: Regenerate.
2004-04-06 Nathanael Nerode <neroden@gcc.gnu.org>
PR bootstrap/14760
* configure.in: When computing baseargs, strip *all* copies of
offending options. Also, don't match/substitute the trailing space,
so that this actually works when two similar options are separated by
only one space.
* configure: Regenerate.
2004-04-06 David Edelsohn <edelsohn@gnu.org>
* configure.in (powerpc-*-aix*): Remove target-libada from noconfigdirs.
(rs6000-*-aix*): Same.
* configure: Regenerate.
to set @stage2_werror_flag@.
* configure: Regenerate.
* Makefile.tpl (top level bootstrap support): Pass
@stage2_werror_flag@ down to configure in stages 2 and 3.
* Makefile.in: Regenerate.
* Makefile.tpl (new-bootstrap): Set CC and CC_FOR_BUILD in configure
for stages 2 and 3 as well as in make. As a consequence, remove
OUTPUT_OPTION (now detected by configure) from the flags passed down
to make.
* Makefile.in: Regenerate.
* Makefile.tpl (new-bootstrap): Fix typo.
* Makefile.in: Regenerate.
into their proper sections.
* Makefile.tpl (top level bootstrap support): Move disabling
of coverage flags from 'make' to 'configure'; improve comments.
* Makefile.in: Regenerate.
* Makefile.tpl (experimental top level bootstrap) Move stage1
language setting from all- target to configure- target; disable
intermodule optimization in stage 1; prevent gratuitous rebuilds
of stage 1.
* Makefile.in: Regenerate.
* configure.in: Comma-separate stage 1 language list for top
level bootstrap.
* configure: Regenerate.
* Makefile.tpl: Clean up experimental top level bootstrap support:
note known problems; set CONFIG_SHELL; don't set BUILD_CC; relocate
prev-gcc in configure- targets as well as all- targets.
* Makefile.in: Regenerate.
Paolo Bonzini <bonzini@gnu.org>
PR bootstrap/14522
* configure.in: Cope with shell that do not support nesting
quotes inside quoted backquote substitutions.
* configure: Regenerate.
2004-03-10 Andrew Pinski <pinskia@physics.uc.edu>
PR bootstrap/14522
* configure.in: Fix escaping of $.
* configure: Regenerate.
2004-03-11 Nathanael Nerode <neroden@gcc.gnu.org>
* configure: Regenerate.
2004-03-08 Paolo Bonzini <bonzini@gnu.org>
PR ada/14131
Move language detection to the top level.
* configure.in: Find default values for the tools as
soon as possible. Disable ada if GNAT is not found.
Emit error message about missing languages. Expand
--enable-languages=all for the gcc subdirectory.
(config)
2004-03-08 Paolo Bonzini <bonzini@gnu.org>
PR ada/14131
Move language detection to the top level.
* acx.m4 (ACX_PROG_GNAT): New macro, moved here
from the gcc subdirectory.
2004-03-09 Hans-Peter Nilsson <hp@axis.com>
* accross.m4 (AC_C_BIGENDIAN_CROSS): Compile endian probe with
"-c". Properly quote parameter for AC_MSG_ERROR.
2004-02-19 Andrew Cagney <cagney@redhat.com>
* config.guess: Update from version 2003-06-12 to 2004-02-16.
* config.sub: Update from version 2003-06-13 to 2004-02-16.
Index: dejagnu/ChangeLog
2004-02-19 Andrew Cagney <cagney@redhat.com>
* config.guess: Update from version 2003-06-12 to 2004-02-16.
* config.sub: Update from version 2003-06-13 to 2004-02-16.
Index: readline/ChangeLog.gdb
2004-02-19 Andrew Cagney <cagney@redhat.com>
* config.guess: Update from version 2003-06-12 to 2004-02-16.
* config.sub: Update from version 2003-06-13 to 2004-02-16.
(I don't know if it will fix either of them, but it relates
to them.)
* configure.in: Don't use shared config.cache for target
directories.
* configure: Regenerate.
* config-ml.in: Use ac_configure_args directly instead of
ml_arguments. Only set ml_norecursion if --no[-]recursion is
actually seen.
2003-10-01 Eric Botcazou <ebotcazou@libertysurf.fr>
* config-ml.in: Propagate INSTALL variables.
2003-08-23 Phil Edwards <pme@gcc.gnu.org>
* configure.in: Use newline instead of semicolon when assuming
shell arguments in a for loop.
* configure: Regenerated.
* configure.in: Switch more things to use maybe dependencies.
* Makefile.tpl: Switch more things to use maybe dependencies.
Factor out common code from autogen IF statements.
* configure: Regenerate.
* Makefile.in: Regenerate.
* configure.in: Switch more things to use maybe dependencies.
Rearrange a little. Use GCC_TOPLEV_SUBDIRS.
* configure: Regenerate.
* Makefile.tpl: Switch more things to use maybe dependencies.
* Makefile.in: Regenerate.
<config>
* config/acx.m4: Introduce _GCC_TOPLEV_NONCANONICAL_BUILD,
_GCC_TOPLEV_NONCANOICAL_HOST, _GCC_TOPLEV_NONCANONICAL_TARGET,
GCC_TOPLEV_SUBDIRS.
Paolo Bonzini
Nathan Sidwell
Daniel Jacobowitz
Eric Botcazou
Bernd Schmidt
Kazu Hirata
Jim Wilson
Catherine Moore
H.J. Lu
Geoffrey Keating
David Edelsohn
Ben Elliston
DJ Delorie
Richard Earnshaw
Christian Groessler
Mark Mitchell
R. Kelley Cook
Jim Blandy
Eric Christopher
Andreas Schwab
Hans-Peter Nilsson
Aldy Hernandez
Paul Brook
Mike Stump
Joern Rennecke
Zack Weinberg
Alexandre Oliva
Nick Clifton
Andrew Cagney
Richard Sandiford
John David Anglin
Aaron W. LaFramboise
Ulrich Weigand
Daniel Berlin
Richard Henderson
Nathanael Nerode
Christopher Faylor
Corinna Vinschen
Rainer Orth
Stan Shebs
Jeff Johnston
Maciej W. Rozycki
Thomas Fitzsimmons
Michael Chastain
Bob Wilson
Keith Seitz
Thiemo Seufer
Andreas Jaeger