* fhandler.h (select_record::thread_errno): Save any encountered errno here.
(select_record::set_select_errno): New function.
(select_record::saw_error): New function.
(select_record::select_record): Initialize thread_errno to zero.
* select.cc (set_handle_or_return_if_not_open): Set thread_errno on failure.
(select_stuff::wait): Record errno for later resurrection in calling thread.
(peek_serial): Ditto.
(pinfo::exit): Move here from _pinfo::exit.
* sigproc.cc (child_info::sync): Use new function to set exitcode and
process_state.
* pinfo.cc (_pinfo::exit): Ditto.
(proc_waiter): Ditto.
(_pinfo::set_exit_state): Define new function.
(_pinfo::dup_proc_pipe): Close handle when there is no parent process around to
care about the exit value.
* dcrt0.cc (dll_crt0_0): Move subproc_ready synchronization later to make sure
that myself is still mapped in parent.
(do_exit): Reflect movement to pinfo::exit.
(__api_fatal): Ditto.
* exceptions.cc (signal_exit): Ditto.
* errno.cc (errmap): Map PROC_NOT_FOUND.
* init.cc (dll_entry): Release myself before exiting.
* sigproc.cc (proc_can_be_signalled): Set errno appropriately.
(sig_send): Ditto. Also remove ill-advised test for !myself->sendsig since
this is an indication of a process which is still initializating -- it is not
an error.
(child_info::sync): Don't set exitcode here. Assume that will happen in
proc_waiter, if necessary.
* spawn.cc (spawn_guts): Delay "wait_for_myself" logic until later. Don't wait
at all if the process has already exited. Reflect movement to pinfo::exit.
throughout.
* tty.cc (tty::common_init): Remove call to SetKernelObjectSecurity and edit
some comments.
* cygheap.h (init_cygheap::ctty): Add new element.
* devices.in (device::parse): Remove special handling for /dev/tty.
* devices.cc: Regenerate.
* dtable.cc (build_fh_pc): Don't reset /dev/tty device. Let the device opener
do that.
* fhandler_termios.cc (tty_min::set_ctty): Redefine to _pinfo class.
* fhandler_tty.cc (fhandler_tty_common::set_close_on_exec): Avoid setting
noninherit flag for ctty.
* tty.h: Move BOOLs to bools.
(tty_min::set_ctty): Redeclare to _pinfo class.
* pinfo.cc (_pinfo::set_ctty): Define new function based on tty_min::set_ctty.
Change first argument from tty number to tty_min class.
* pinfo.h (_pinfo::set_ctty): Declare.
* fhandler_console.cc (fhandler_console::get_tty_stuff): Reflect move of
set_ctty to _pinfo class.
* fhandler_tty.cc (fhandler_tty_slave::open): Treat FH_TTY specially. Use
saved cygheap value if it exists. Otherwise convert to real device and save on
first time open.
(fhandler_tty_common::dup): Potentially set controlling tty if duping a slave
tty.
* syscalls.cc (setsid): Close controlling tty in cygheap.
* tty.cc: Change some BOOLs to bools.
* devices.gperf: New file.
* devices.shilka: New file.
* cygwin-gperf: New file.
* cygwin-shilka: New file.
* fhandler_fifo.cc: New file.
* fhandler_nodevice.cc : New file. Reorganize headers so that path.h precedes
fhandler.h throughout. Remove device argument and unit arguments from fhandler
constructors throughout. Remove pc arguments to fhandler functions and use
internal pc element instead, throughout. Use dev element in pc throughout.
Use major/minor elements rather than units and device numbers previously in
fhandler class. Use correct methods for fhandler file names rather than
directly accessing file name variables, throughout.
* Makefile.in (DLL_OFILES): Add devices.o, fhandler_fifo.o
* dcrt0.cc (dll_crt0_1): Call device::init.
* devices.h: Renumber devices based on more Linux-like major/minor numbers.
Add more devices. Declare standard device storage.
(device): Declare struct.
* dir.cc (opendir): Use new 'build_fh_name' to construct a fhandler_* type.
* dtable.cc (dtable::get_debugger_info): Ditto.
(cygwin_attach_handle_to_fd): Ditto.
(dtable::release): Remove special FH_SOCKET case in favor of generic
"need_fixup_before" test.
(dtable::init_std_file_from_handle): Use either build_fh_dev or build_fh_name
to build standard fhandler.
(dtable::build_fh_name): Renamed from dtable::build_fhandler_from_name. Move
out of dtable class. Don't accept a path_conv argument. Just build it here
and pass it to:
(build_fh_pc): Renamed from dtable::build_fhandler. Move out of dtable class.
Use intrinsic device type in path_conv to create new fhandler.
(build_fh_dev): Renamed from dtable::build_fhandler. Move out of dtable class.
Simplify arguments to just take new 'device' type and a name. Just return
pointer to fhandler rather than trying to insert into dtable.
(dtable::dup_worker): Accommodate above build_fh name changes.
(dtable::find_fifo): New (currently broken) function.
(handle_to_fn): Use strechr for efficiency.
* dtable.h: Reflect above build_fh name changes and argument differences.
(fhandler_base *&operator []): Return self rather than copy of self.
* fhandler.cc (fhandler_base::operator =): Use pc element to set normalized
path.
(fhandler_base::set_name): Ditto.
(fhandler_base::raw_read): Use method to access name.
(fhandler_base::write): Correctly use get_output_handle rather than get_handle.
(handler_base::device_access_denied): New function.
(fhandler_base::open): Eliminate pc argument and use pc element of
fhandler_base throughout.
(fhandler_base::fstat): Detect if device is based in filesystem and use
fstat_fs to calculate stat, if so.
(fhandler_base::fhandler_base): Eliminate handling of file names and, instead,
just free appropriate component from pc.
(fhandler_base::opendir): Remove path_conv parameter.
* fhandler.h: Remove all device flags.
(fhandler_base::pc): New element.
(fhandler_base::set_name): Change argument to path_conv.
(fhandler_base::error): New function.
(fhandler_base::exists): New function.
(fhandler_base::pc_binmode): New function.
(fhandler_base::dev): New function.
(fhandler_base::open_fs): New function.
(fhandler_base::fstat_fs): New function.
(fhandler_base::fstat_by_name): New function.
(fhandler_base::fstat_by_handle): New function.
(fhandler_base::isfifo): New function.
(fhandler_base::is_slow): New function.
(fhandler_base::is_auto_device): New function.
(fhandler_base::is_fs_special): New function.
(fhandler_base::device_access_denied): New function.
(fhandler_base::operator DWORD&): New operator.
(fhandler_base::get_name): Return normalized path from pc.
(fhandler_base::get_win32_name): Return windows path from pc.
(fhandler_base::isdevice): Renamed from is_device.
(fhandler_base::get_native_name): Return device format.
(fhandler_fifo): New class.
(fhandler_nodevice): New class.
(select_stuff::device_specific): Remove array.
(select_stuff::device_specific_pipe): New class element.
(select_stuff::device_specific_socket): New class element.
(select_stuff::device_specific_serial): New class element.
(select_stuff::select_stuff): Initialize new elements.
* fhandler_disk_file.cc (fhandler_base::fstat_by_handle): Move to base class
from fhandler_disk_file.
(fhandler_base::fstat_by_name): Ditto.
(fhandler_base::fstat_by_name): Ditto.
(fhandler_disk_file::open): Move most functionality into
fhandler_base::open_fs.
(fhandler_base::open_fs): New function.
(fhandler_disk_file::close): Move most functionality into
fhandler_base::close_fs.
(fhandler_base::close_fs): New function.
* fhandler_mem.cc (fhandler_dev_mem::open): Use device name in debugging
output.
* fhandler_socket.cc (fhandler_socket::set_connect_secret): Copy standard
urandom device into appropriate place.
(fhandler_socket::accept): Reflect change in fdsock return value.
* fhandler_tty.cc: See "throughouts" above.
* net.cc: Accommodate fdsock change throughout.
(fdsock): Return success or failure, accept fd argument and device argument.
* path.cc (symlink_info::major): New element.
(symlink_info::minor): New element.
(symlink_info::parse_device): Declare new function.
(fs_info::update): Accommodate changes in path_conv class.
(path_conv::fillin): Ditto.
(path_conv::return_and_clear_normalized_path): Eliminate.
(path_conv::set_normalized_path): New function.
(path_conv::path_conv): Set info in dev element. Use path_conv methods Check
for FH_FS rather than FH_BAD to indicate when to fill in filesystem stuff.
where appropriate rather than direct access. Use set_normalized_path to set
normalized path.
(windows_device_names): Eliminate.
(get_dev): Ditto.
(get_raw_device_number): Ditto.
(get_device_number): Ditto.
(win32_device_name): Call new device name parser to do most of the heavy
lifting.
(mount_info::conv_to_win32_path): Fill in dev field as appropriate.
(symlink_worker): Handle new device files.
(symlink_info::check): Ditto.
(symlink_info::parse_device): Define new function.
* path.h (executable_states): Move here from fhandler.h.
(fs_info): Rename variables to *_storage and create methods for accessing same.
(path_conv): Add dev element, remove devn and unit and adjust inline methods to
accommodate.
(set_normalized_path): Declare new function.
* pinfo.cc (_pinfo::commune_recv): Add broken support for handling fifos.
(_pinfo::commune_send): Ditto.
* pipe.cc (fhandler_pipe::close): check for existence of handle before closing
it.
(handler_pipe::create): Rename from make_pipe. Change arguments to accept
fhandler_pipe array. Accommodate fifos.
(pipe): Rework to deal with fhandler_pipe::create changes.
(_pipe): Ditto.
* select.cc: Use individual device_specific types throughout rather than
indexing with obsolete device number.
(set_bits): Use is_socket call rather than checking device number.
* shared_info.h (CURR_MOUNT_MAGIC): Update.
(conv_to_win32_path): Reflect addition of device argument.
* syscalls.cc (mknod_worker): New function.
(open): Use build_fh_name to build fhandler.
(chown_worker): Detect if this is an 'auto' device rather than an on-filesystem
device and handle appropriately.
(chmod_device): New function.
(chmod): Detect if this is an 'auto' device rather than an on-filesystem device
and handle appropriately. Use chmod_device to set mode of in-filesystem
devices.
(stat_worker): Eliminate path_conv argument. Call build_fh_name to construct
fhandler. Use fh->error() rather than pc->error to detect errors in fhandler
construction.
(access_worker): New function pulled from access. Accommodate in-filesystem
devices.
(access): Use access_worker.
(fpathconf): Detect if this is an 'auto' device rather than an on-filesystem
device and handle appropriately.
(mknod_worker): New function.
(mknod32): New function.
(chroot): Free normalized path -- assuming it was actually cmalloced.
* tty.cc (create_tty_master): Tweak for new device class.
(tty::common_init): Ditto.
* winsup.h (stat_worker): Remove.
(symlink_worker): Declare.
* exceptions.cc (set_process_mask): Just call sig_dispatch_pending and don't
worry about pending_signals since sig_dispatch_pending should always do the
right thing now.
(sig_handle): Reorganize SIGCONT handling to more closely conform to SUSv3.
* pinfo.h: Move __SIG enum to sigproc.h.
(PICOM_FIFO): New enum element.
(_pinfo): Remove 'thread2signal' stuff throughout class.
(_pinfo::commune_send): Make varargs.
(_pinfo::sigtodo): Eliminate.
(_pinfo::thread2signal): Ditto.
* signal.cc (kill_worker): Eliminate call to setthread2signal.
* sigproc.cc (local_sigtodo): Eliminate.
(getlocal_sigtodo): Ditto.
(sigelem): New class.
(pending_signals): New class.
(sigqueue): New variable, start of sigqueue linked list.
(sigcatch_nonmain): Eliminate.
(sigcatch_main): Eliminate.
(sigcatch_nosync): Eliminate.
(sigcomplete_nonmain): Eliminate.
(pending_signals): Eliminate.
(sig_clear): Call signal thread to clear pending signals, unless already in
signal thread.
(sigpending): Call signal thread to get pending signals.
(sig_dispatch_pending): Eliminate use of pending_signals and just check
sigqueue.
(sigproc_terminate): Eliminate all of the obsolete semaphore stuff. Close
signal pipe handle.
(sig_send): Eliminate all of the obsolete semaphore stuff and use pipe to send
signals.
(getevent): Eliminate.
(pending_signals::add): New function.
(pending_signals::del): New function.
(pending_signals::next): New function.
(wait_sig): Eliminate all of the obsolete semaphore stuff. Use pipe to
communicate and maintain a linked list of signals.
* sigproc.h: Move __SIG defines here. Add __SIGPENDING.
(sig_dispatch_pending): Remove "C" specifier.
(sig_handle): Accept a mask argument.
* thread.cc: Remove signal handling considerations throughout.
cygerrno.h.
* include/cygwin/config.h (__DYNAMIC_REENT__): Define.
* include/cygwin/version.h: Bump API minor version.
* cygwin.din: Export __getreent
* cygerrno.h: Include errno.h. Fix places where _impure_ptr is used directly
to store the errno value.
* debug.cc (__set_errno): Ditto.
* errno.cc: Remove _RRENT_ONLY define to get errno.cc compiled.
* signal.cc: Rename _reent_clib to _REENT throughout.
* thread.h (reent_clib): Remove prototype.
* thread.cc (reent_clib): Rename reent_clib to __getreent. Return _impure_ptr
until MTinterface is initialized.
(reent_winsup): Fix a possible SEGV when _r == NULL. Return NULL instead.
* MTinterface::fixup_after_fork: Switch reent back to _impure_ptr to keep
signal handling running when fork is called from a thread other than the
mainthread.
(init_cheap): Ditto for declaration.
* fork.cc (fork_parent): Use user_heap element in cygheap.
* heap.h (inheap): Ditto.
* heap.cc (sbrk): Ditto.
(heap_init): Ditto. Reorganize to shrink heap chunk as required and record new
value in cygheap.
* dcrt0.cc (dll_crt0_1): More "move the cygthread init" games.
* shared.cc (open_shared): Rework memory protection to properly deal with
relocated shared segment.
(shared_info::heap_chunk_size): Rename element to 'heap_chunk'.
* shared_info.h (shared_info): Ditto for declaration.
* strace.cc (strace::hello): Report on heap chunk size from cygheap since it
may shrink.
* shared.cc (shared_info::heap_chunk_size): Store info as megabytes. Search
HKEY_LOCAL_MACHINE as well as HKEY_CURRENT_USER.
* shared_info.h (shared_info::initial_heap_size): Change element name to
reflect new functionality.
* strace.cc (strace::hello): Report on initial heap size.
already taken care of that.
* fhandler_console.cc (fhandler_console::open): Initialize handles to NULL.
(fhandler_console::close): Ditto. GNUify non-GNU formatted functions calls
throughout.
may not end up in the pool.
(cygthread::new): Avoid race when checking for initialized. Add debugging
code.
* fhandler.cc (fhandler_base::raw_read): Add case for ERROR_INVALID_HANDLE due
to Win95 directories.
(fhandler_base::open): Handle errors due to Win95 directories.
(fhandler_base::close): Add get_nohandle () test.
(fhandler_base::set_close_on_exec): Ditto.
(fhandler_base::fork_fixup): Ditto.
(fhandler_base::lock): Change error code to Posix EINVAL.
(fhandler_base::dup): If get_nohandle (), set new value to INVALID_HANDLE_VALUE
instead of NULL.
* fhandler_disk_file.cc (fhandler_disk_file::fstat): Call fstat_by_name if
get_nohandle (). Remove extraneous element from strpbrk.
(fhandler_disk_file::open): Remove test for Win95 directory.
* fhandler_random.cc (fhandler_dev_random::open): Add set_nohandle ().
* fhandler_clipboard.cc (fhandler_dev_clipboard::open): Ditto.
* fhandler_zero.cc (fhandler_dev_zero::open): Ditto.
(fhandler_dev_zero::close): Delete.
* fhandler.h (class fhandler_dev_zero): Ditto.
set up.
(break_here): New function, for debugging.
(initial_env): Add program name to "Sleeping" message. Implement new
"CYGWIN_DEBUG" environment variable option.
* exceptions.cc (debugger_command): Add argument to dumper call.
* strace.cc (strace::hello): Use winpid if cygwin pid is unavailable.
(strace::vsprntf): Ditto.
* environ.cc (spenv::retrieve): Add debugging statements.
* pinfo.cc (set_myself): Don't call strace.hello if already stracing.
* strace.cc (strace): Move NO_COPY keyword so that it will actually take
effect.
(timeGetTime): Ditto.
(timeBeginPeriod): Ditto.
(timeEndPeriod): Ditto.
* hires.h (hires_base): New class. Renamed from hires.
(hires_us): New class.
(hires_ms): New class.
* strace.cc (strace::microseconds): Use hires_us class.
* times.cc (gettimeofday): Use hires-ms class.
(hires_us::prime): Renamed from hires::prime.
(hires_us::usecs): Renamed from hires:usecs.
(hires_ms::prime): New method.
(hires_ms::usecs): New method.
(hires_ms::~hires_ms): New destructor.
* fhandler.h (fhandler_proc::fill_filebuf): Take a pinfo argument.
* fhandler_proc.cc (fhandler_proc::get_proc_fhandler): Simplify search for
given pid.
(fhandler_proc::readdir): Assume that pid exists if it shows up in the winpid
list.
* fhandler_process.cc (fhandler_process::open): Simplify search for given pid.
Call fill_filebuf with pinfo argument.
(fhandler_process::fill_filebuf): Pass pinfo here and assume that it exists.
* pinfo.h (pinfo::remember): Define differently if sigproc.h is not included.
* dll_init.cc (dll_list::detach): Don't run destructor on exit.
* dtable.cc (dtable::extend): Use new macro.
* exceptions.cc (try_to_debug): Ditto.
* strace.cc (strace::hello): Only output debugging info when we think we're
being debugged.
where appropriate, throughout. Remove unneeded exceptions.h, where
appropriate, throughout. Remove unneeded perprocess.h, where appropriate,
throughout.
* strace.cc (strace::microseconds): Use hires class for calculating times.
* sync.h (new_muto): Use NO_COPY explicitly in declaration.
* times.cc (gettimeofday): Reflect change in usecs argument.
(hires::usecs): Ditto. Changed name from utime.
* winsup.h (NO_COPY): Add nocommon attribute to force setting aside space for
variable.
* regcomp.c (REQUIRE): Add a void cast to bypass a warning.
required to allow use of some things from user loaded DLL.
(CW_STRACE_ON): Add new feature.
(CW_CYGWIN_PID_TO_WINPID): Ditto.
* pinfo.cc (set_myself): Call "strace.hello" to initiate possible strace
session.
(pinfo::init): Guard against dereferencing uninitialized myself.
* sigproc.cc (wait_sig): Call strace.hello() when __SIGTRACE "signal" received.
* strace.cc (strace::hello): New method.
* wincap.cc (wincapc::init): Avoid initializing if already initialized.
* wincap.h (wincapc::wincapc): New method.
* include/sys/cygwin.h: Add new CW_ enums. Kludge typedefs of {g,u}id_t if
required.
* strace.h (strace::hello): Declare new method.
adding an va_list interface to strace.
(strace::printf): Calls strace::vprntf now.
(strace_printf): New function providing an extern "C" interface to
trace output.
* include/sys/strace.h: Make plain C clean.
(class strace): Add `vprntf' method.
* path.h: Remove unneeded extern.
* spawn.cc (std_suffixes): Make static. Don't set dwProcessId here since it
makes the process unsignalable. Set strace flag that this is an execed process
stub.
* strace.cc (strace::vsprntf): Use strace flag to indicate when to visually
flag that this is an exec stub.
* include/sys/strace.h (strace): Add 'execing' flag.
PROC_ADDCHILD. Return 0 when terminated child has just been reparented.
(wait_subproc): Only send SIGCHLD when proc_subproc returns != 0.
* strace.cc (strace::vsprntf): Only strip .exe extension from program name.
* dcrt0.cc (dll_crt0_1): Call signal_fixup_after_exec where appropriate. Set
myself->uid from parent version. Just use ThreadItem Init method. Close or
store hexec_proc as appropriate.
(_dll_crt0): Store user_data->forkee here so that proper tests can be made
subsequently.
(do_exit): Remove hExeced stuff.
* environ.cc (environ_init): Accept environ count as well as environ pointer.
* environ.h: Reflect above change.
* pinfo.cc (pinfo_init): Ditto. Accept environ count.
(fixup_in_spawned_child): Remove.
* spawn.cc (spawn_guts): Move signal code to dll_crt0_1. Don't suspend execing
process since it is no longer necessary. Store envc.
* exceptions.cc (signal_fixup_after_exec): New function.
(call_handler): Remove hExeced test.
* child_info.h (cygheap_exec_info): Store envc as well as envp.
(child_info_spawn): Store hexec_proc so that it can be closed in child.
* path.cc (normalize_posix_path): Avoid intermediate use of temporary cwd buf.
(normalize_win32_path): Ditto.
(cwdstuff::get_initial): Always set lock.
* sigproc.h: Remove hExeced.
* strace.cc (strace::vsprntf): Modify to accomodate for lack of hExeced.
* thread.cc (MTinterface::Init): Merge Init1 and ClearReent into this method.
(MTinterface::Init1): Eliminate.
(MTinterface::ClearReent): Eliminate.
* thread.h: Reflect above changes.
* include/sys/strace.h (strace): Make microseconds() public. Make various
functions 'regparm', throughout.
* pinfo.h (_pinfo): Inline simple signal manipulation functions. Requires
inclusion of thread.h which was removed from .cc files, where appropriate.
throughout.
* pinfo.cc: Eliminate signal manipulation functions.
(_pinfo::exit): Calculate total rusage for exiting process here.
* cygheap.cc (size2bucket): Eliminate.
(init_buckets): Ditto.
(_cmalloc): Calculate size and bits in a loop rather than going through a
function call.
(_crealloc): Use stored array index to calculate allocated size.
* spawn.cc (spawn_guts): Use _pinfo exit method to exit, calculating cpu usage.
(child_info): Move some fields from child_info_spawn to here.
* cygheap.cc: Make cygheap pointers NOCOPY.
* dcrt0.cc (dll_crt0_1): Copy cygwin heap here regardless of whether we've been
forked or execed.
* dtable.cc (dtable::fixup_after_fork): Just release close-on-exec fds.
* exceptions.cc (stackdump): Respond to C warning.
* fork.cc: Reorganize to minimize stack copying.
(fork_child): New function.
(fork_parent): Ditto.
(sync_with_child): Don't suspend the forkee.
(sync_with_parent): Ditto. Make into a function.
* heap.cc (heap_init): Add some debugging output.
* path.cc (path_conv::check): Add an assertion.
(has_suffix): Ditto.
* security.cc (get_pw_sid): Defend against NULL.
* sigproc.cc (proc_subproc): Fix debugging output.
(wait_sig): Ditto.
* strace.cc: Make statics NO_COPY throughout.
(strace::vsprntf): Defend against NULL.
* fhandler.cc (fhandler_base::open): Ditto.
* fhandler.cc (fhandler_base::fhandler_base): Ditto.
(fhandler_base::read): Ditto. Add more debugging output. Don't issue a \r
when \r\n detected.
* pipe.cc (make_pipe): Streamline slightly. Make debug output more
interesting.
* strace.cc (strace::vsprintf): Use __progname where appropriate to distinguish
strace output when exec'ing.
throughout.
* shared.h: Remove.
* cygwin_version.h: New file.
* delqueue.h: New file.
* environ.h: New file.
* host_dependent.h: New file.
* perprocess.h: New file.
* registry.h: New file.
* security.h: New file.
* *.cc: put winsup.h before other headers (for __INSIDE_CYGWIN__);
use cur_environ() instead of just environ
* times.cc: remove import protections
* glob.c: add winsup.h
* localtime.c: ditto
* smallprint.c: ditto
* Makefile.in: don't __INSIDE_CYGWIN__ as it messes up profiling.
variable argument macros when possible.
* sigproc.cc: Throughout, use sigproc_printf rather than sip_printf.
* strace.cc (strace::prntf): Remove 'active' check, since callers are supposed
to ensure this.
(__system_printf): Remove. Subsumed by strace::prntf.
* winsup.h: Define "NEW_MACRO_VARARGS" to indicate when to use new macro
varargs capability.
* debug.cc (threadname_init): Pass name of lock as arg 2 of new_muto.
* malloc.cc (malloc_init): Ditto.
* sigproc.cc (sigproc_init): Ditto.
* exceptions.cc (events_init): Ditto.
(call_handler): Eliminate special case for hExeced. Report locked thread in
debugging output.
* fhandler.cc (fhandker_pipe::fhandler_pipe): Propagate device type to base
class.
* fhandler.h (fhandler_pipe): Ditto.
* hinfo.cc (hinfo::build_fhandler): Pass specific type of pipe to constructor.
* spawn.cc (spawn_guts): Eliminate dependency on signal when waiting for
subprocess.
* strace.cc: Remove obsolete #ifdef.
* sync.cc (muto::muto): Save the name of the muto.
(muto:~muto): Also release the muto.
* sync.h: Add a muto name field.
* select.cc (peek_pipe): Avoid doing a PeekNamedPipe on the write end of a
pipe.
(getprogname): Eliminate obsolete function.
(dll_crt0_1): Move initial strace initialization output to set_myself.
* exceptions.cc (interruptible): Add debugging output.
(interrupt_setup): New function.
(interrupt_now): Use interrupt_setup to set up common interrupt handler stuff.
(interrupt_on_return): Ditto.
(call_handler): Move signal_arrived arm and clear threads to region where
signalled thread is suspended or suffer races.
* pinfo.cc (set_myself): Output interesting information when strace is first
initialized. Initialize progname here.
* sigproc.cc (sig_dispatch_pending): Modify to ensure that flush signal are
sent synchronously.
* strace.cc (strace_vsprintf): Move code into strace program.
* uname.cc (uname): Use 'osname' global to construct cygwin name + Windows type
+ version.
Corinna Vinschen
Christopher Faylor
Robert Collins
DJ Delorie