Commit Graph

14 Commits

Author SHA1 Message Date
Paolo Bonzini a7dc05b5d1 toplevel:
2005-12-05  Paolo Bonzini  <bonzini@gnu.org>

	Sync with gcc:

	2005-12-05  Paolo Bonzini  <bonzini@gnu.org>

        * configure.in (CONFIGURED_BISON, CONFIGURED_YACC, CONFIGURED_M4,
        CONFIGURED_FLEX, CONFIGURED_LEX, CONFIGURED_MAKEINFO): Remove
        "CONFIGURED_" from the AC_CHECK_PROGS invocation.  Move below.
        Find in-tree tools if available.
        (EXPECT, RUNTEST, LIPO, STRIP): Find them and substitute them.
        (CONFIGURED_*_FOR_TARGET): Don't set nor substitute.
        (*_FOR_TARGET): Set them with GCC_TARGET_TOOL.
        (COMPILER_*_FOR_TARGET): New.
        * Makefile.tpl (HOST_EXPORTS): Add *_FOR_TARGET symbols that gcc needs.
        (BASE_TARGET_EXPORTS): Use COMPILER_*_FOR_TARGET symbols.
        (CONFIGURED_*, USUAL_*): Remove.
        (BISON, YACC, FLEX, LEX, M4, MAKEINFO, EXPECT, RUNTEST, LIPO,
        STRIP): Use autoconf substitutions.
        (COMPILER_AS_FOR_TARGET, COMPILER_LD_FOR_TARGET,
        COMPILER_NM_FOR_TARGET): New.
        (EXTRA_HOST_FLAGS): Pass LIPO and STRIP.

        (all): Make all-host and all-target in parallel.
        (do-[+make_target+], do-check, install, [+compare-target+]): Ensure
        that $$r and $$s are set before invoking a recursive make.
        (stage[+id+]-bubble): Likewise, and invoke the comparison at the end.
        ([+bootstrap-target+]): Inline most of the `all' target.

	2005-11-29  Ben Elliston  <bje@au.ibm.com>

        * Makefile.tpl (clean-target-libgcc): Invoke clean-target-libgcc
        from the gcc build directory.
        * Makefile.in: Regenerate.

	2005-11-29  Ben Elliston  <bje@au.ibm.com>

        * Makefile.def: Add new libdecnumber host_module.  Make all-gcc
        depend on all-libdecnumber.
        * configure.in (host_libs): Include libdecnumber.
        * Makefile.in: Regenerate.
        * configure: Likewise.

	2005-11-21  Kean Johnston  <jkj@sco.com>

        * config.sub, config.guess: Sync from upstream sources.

config:
2005-12-05  Paolo Bonzini  <bonzini@gnu.org>

	* acx.m4 (GCC_TARGET_TOOL): New.
2005-12-05 15:16:05 +00:00
Paolo Bonzini 60cfca657c toplevel:
2005-08-12  Paolo Bonzini  <bonzini@gnu.org>

	* configure.in: Replace NCN_STRICT_CHECK_TOOL with
	NCN_STRICT_CHECK_TOOLS, and likewise for NCN_STRICT_CHECK_TARGET_TOOLS.
	Look for alternate names of the target cc and c++

config:
2005-08-12  Paolo Bonzini  <bonzini@gnu.org>

	* config/acx.m4 (NCN_CHECK_TARGET_TOOL, NCN_STRICT_CHECK_TOOL,
	NCN_STRICT_CHECK_TARGET_TOOL): Remove.
	(NCN_STRICT_CHECK_TOOLS, NCN_STRICT_CHECK_TARGET_TOOLS): New,
2005-08-12 14:22:33 +00:00
Paolo Bonzini 0d3442bf36 2005-04-29 Paolo Bonzini <bonzini@gnu.org>
Sync from gcc:

	2005-04-22  Bernd Schmidt  <bernd.schmidt@analog.com>

        * config.sub: Update from master copy.

	2005-04-19  Hans-Peter Nilsson  <hp@axis.com>

        * configure.in <crisv32-*-*, cris-*-*>: New local variable
        libgcj_ex_libffi.  Have specific match for *-*-linux*.  Separate
        matches for "*-*-aout" and "*-*-elf".  Don't disable libffi for
        "*-*-elf" and "*-*-linux*".
        * configure: Regenerate.

config:
2005-04-29  Paolo Bonzini  <bonzini@gnu.org>

	* acx.m4 (ACX_PROG_GNAT): Remove stray break.
2005-04-29 14:00:03 +00:00
Paolo Bonzini 7fc2ca22c1 2005-02-28 Paolo Bonzini <bonzini@gnu.org>
Sync from gcc.

	2005-02-28  Paolo Bonzini  <bonzini@gnu.org>

	PR bootstrap/17383
	* Makefile.def (target_modules): Remove "stage", now unnecessary.
	* Makefile.tpl (HOST_SUBDIR): New substitution.
	(STAGE_HOST_EXPORTS, EXPECT, HOST_LIB_PATH, USUAL_AR_FOR_TARGET,
	USUAL_AS_FOR_TARGET, USUAL_DLLTOOL_FOR_TARGET, USUAL_GCC_FOR_TARGET,
	USUAL_LD_FOR_TARGET, USUAL_NM_FOR_TARGET, USUAL_OBJDUMP_FOR_TARGET,
	USUAL_RANLIB_FOR_TARGET, USUAL_WINDRES_FOR_TARGET): Use it.
	(Host modules, Bootstrapped modules): Use it.
	(Build modules, Target modules): Do not create symlink trees,
	always configure out-of-srcdir.
	(distclean): Try removing $(host_subdir) with rm before using rm -rf.
	* configure.in (FLAGS_FOR_TARGET, CC_FOR_TARGET, GCJ_FOR_TARGET,
	GFORTRAN_FOR_TARGET, CXX_FOR_TARGET, RAW_CXX_FOR_TARGET): Use
	$(HOST_SUBDIR).  Create a symlink for host_subdir.

	* Makefile.in: Regenerate.
	* configure: Regenerate.

	Merged from libada-gnattools-branch:
	2004-11-28  Nathanael Nerode  <neroden@gcc.gnu.org>

	* Makefile.def: Add gnattools as a module, depending on target-libada.
	* Makefile.in: Regenerate.
	* configure.in: Include gnattools in host_tools; disable it if ada
	is disabled.
	* configure: Regenerate.

config:
2005-02-28  Paolo Bonzini  <bonzini@gnu.org>

	PR bootstrap/17383
	* acx.m4 (GCC_TOPLEV_SUBDIRS): Set HOST_SUBDIR if an in-src
	gcc build is going.
2005-02-28 14:07:03 +00:00
Nathanael Nerode c355ca594b 2004-08-13 Nathanael Nerode <neroden@gcc.gnu.org>
* Add ACX_{TARGET,HOST,BUILD}_NONCANONICAL,
	which do an automatic AC_SUBST on _GCC_TOPLEV_*_NONCANONICAL.
	The intention is that we will migrate to these bit by bit.
2004-08-13 22:32:31 +00:00
Paolo Bonzini 21ff191e82 2004-06-09 Paolo Bonzini <bonzini@gnu.org>
* Makefile.tpl (touch-stage[+id+]): New.
	(restage[+prev+]): Depend on touch-stage[+id+].

	* Makefile.tpl (RECURSE_FLAGS_TO_PASS): New.
	Use it throughout.

	* Makefile.def: Add profile and feedback bootstrap stages.
	Remove next field from bootstrap stages.
	* Makefile.tpl (LN, LN_S): Substitute.
	(stageN-start, stageN-end): Use double-colon rules, to
	provide a hook for additional setup commands.
	(distclean-stageN-gcc, restageN): Create dependencies from
	[+prev+], not from [+next+].
	(stageN-bubble): Add commands for successive stages from
	[+prev+], using double-colon rules.
	(all-stageN-gcc): Fix typo.
	(stagefeedback-start, profiledbootstrap): New.
	* Makefile.in: Regenerate.
	* configure.in: Call ACX_PROG_LN.
	* configure: Regenerate.

config/ChangeLog:
2004-06-09  Paolo Bonzini  <bonzini@gnu.org>

	* acx.m4 (ACX_PROG_LN): From gcc, modified to
	accept a parameter.
2004-06-09 08:32:35 +00:00
Paolo Bonzini c580d51621 2004-05-23 Paolo Bonzini <bonzini@gnu.org>
* Makefile.def (host_modules): add libcpp.
	* Makefile.tpl: Add dependencies on and for libcpp.
	* Makefile.in: Regenerate.
	* configure.in: Add libcpp host module.
	* configure: Regenerate.

config/ChangeLog:

2004-05-23  Paolo Bonzini  <bonzini@gnu.org>

	* acx.m4 (ACX_HEADER_STDBOOL, ACX_HEADER_STRING):
	From gcc.
2004-05-24 10:45:14 +00:00
DJ Delorie cb2333e85e merge from gcc 2004-05-13 18:14:28 +00:00
DJ Delorie 866c244e59 merge from gcc:
2004-04-27  Paolo Bonzini  <bonzini@gnu.org>

	Revert:
	2004-04-26  Paolo Bonzini  <bonzini@gnu.org>

	* Makefile.def (flags_to_pass): Remove *dir variables that
	are passed to the modules via TOPLEVEL_CONFIGURE_ARGUMENTS,
	as well as prefix and exec_prefix.
	* Makefile.in: Regenerate.

2004-04-26  Paolo Bonzini  <bonzini@gnu.org>

	* Makefile.def (host_modules): Mark with the bootstrap
	flag packages on which gcc depends.
	* Makefile.tpl (all-bootstrap): Use it.
	* Makefile.in: Regenerate.

2004-04-26  Paolo Bonzini  <bonzini@gnu.org>

	* Makefile.def (flags_to_pass): Remove *dir variables that
	are passed to the modules via TOPLEVEL_CONFIGURE_ARGUMENTS,
	as well as prefix and exec_prefix.
	* Makefile.in: Regenerate.

2004-04-26  Paolo Bonzini  <bonzini@gnu.org>

        * configure.in: Invoke ACX_PROG_CMP_IGNORE_INITIAL.
        * configure: Regenerate.
        * config/acx.m4: Mutuate ACX_PROG_CMP_IGNORE_INITIAL from gcc.
        * gcc/Makefile.tpl (compare): Use the result of the test.
        * gcc/Makefile.in: Regenerate.

2004-04-23  Paolo Bonzini  <bonzini@gnu.org>

	* Makefile.tpl (all-stage1-gcc, all-stage2-gcc, all-stage3-gcc):
	Always relocate gcc and prev-gcc to the original names, even
	if the build fails.
	(new-cleanstrap, new-restage1, new-restage2, new-restage3):
	New targets.
2004-04-27 18:25:01 +00:00
Nathanael Nerode cfc26d93b5 (top level)
2004-03-11  Nathanael Nerode  <neroden@gcc.gnu.org>

	* configure: Regenerate.

2004-03-08  Paolo Bonzini  <bonzini@gnu.org>

	PR ada/14131
	Move language detection to the top level.
	* configure.in: Find default values for the tools as
	soon as possible.  Disable ada if GNAT is not found.
	Emit error message about missing languages.  Expand
	--enable-languages=all for the gcc subdirectory.

(config)
2004-03-08  Paolo Bonzini  <bonzini@gnu.org>

	PR ada/14131
	Move language detection to the top level.
	* acx.m4 (ACX_PROG_GNAT): New macro, moved here
	from the gcc subdirectory.

2004-03-09  Hans-Peter Nilsson  <hp@axis.com>

	* accross.m4 (AC_C_BIGENDIAN_CROSS): Compile endian probe with
	"-c".  Properly quote parameter for AC_MSG_ERROR.
2004-03-11 05:15:36 +00:00
Daniel Jacobowitz 284d80c385 * acx.m4 (AC_PROG_CPP_WERROR): New. 2003-09-25 14:27:21 +00:00
Nathanael Nerode 9b52096310 <top level>
* configure.in: Switch more things to use maybe dependencies.
	Rearrange a little.  Use GCC_TOPLEV_SUBDIRS.
	* configure: Regenerate.
	* Makefile.tpl: Switch more things to use maybe dependencies.
	* Makefile.in: Regenerate.

<config>
	* config/acx.m4: Introduce _GCC_TOPLEV_NONCANONICAL_BUILD,
	_GCC_TOPLEV_NONCANOICAL_HOST, _GCC_TOPLEV_NONCANONICAL_TARGET,
	GCC_TOPLEV_SUBDIRS.
2003-05-18 15:49:06 +00:00
Alexandre Oliva c991d31031 * acx.m4: Name cache variables properly.
(NCN_STRICT_CHECK_TOOL): If program is not found and
value-if-not-found is empty, use ${ncn_tool_prefix}$2 or $2,
depending on whether build != host or not.
(NCN_STRICT_CHECK_TARGET_TOOL): Ditto, with the target prefix.
2002-12-28 17:57:49 +00:00
Nathanael Nerode 9ce3107655 missed in previous giant commit 2002-12-28 07:09:49 +00:00