dynamically loaded since fork() doesn't work in that scenario anyway.
(dll_dllcrt0_1): Don't accommodate dynamically loaded dlls.
* exceptions.cc (ctrl_c_handler): Don't lock the process; there's too much risk
of deadlock.
* sigproc.cc (_cygtls::remove_wq): Don't try to remove anything from the waitq
if there is obviously nothing there.
* strace.cc (strace::activate): Allow stracing dynamically loaded cygwin1.dll.
(_cygtls::signal_exit): Close my_readsig via close_my_readsig(), avoiding
communication with the signal pipe.
(wait_sig): Close my_readsig via close_my_readsig().
(munlock): Ditto.
* ntdll.h: Rearrange to have all preprocessor definitions at the start
of the file. Add comments to each definition block.
(MAP_PROCESS): Rename from LOCK_VM_IN_WSL.
(MAP_SYSTEM): Rename from LOCK_VM_IN_RAM.
never remember what it stands for.
(sig_handle_tty_stop): Remove obsolete call to sig_handle_tty_stop.
(_cygtls::call_signal_handler): Rework to grab signal information from
_main_tls if none is set for _my_tls. Try harder to keep thread locked.
(reset_signal_arrived): Delete.
* fhandler.cc (fhandler_base_overlapped::wait_overlapped): Use new cygWFMO call
to wait for an event + standard cygwin stuff. Modify debug output to
acccomodate new function.
* fhandler_console.cc (fhandler_console::read): Replace WaitForMultipleObjects
with cygWFMO.
* fhandler_socket.cc (get_inet_addr): Add comment.
* gendef (_sigdelayed): Remove call to reset_signal_arrived.
* sigproc.cc (_cygtls::signal_exit): Don't close my_readsig here unless we're
in the signal thread.
(create_signal_arrived): Create signal_arrived as auto-reset so that only one
thread is woken when a signal arrives.
* sigproc.h (cygWFMO): New function.
(reset_signal_arrived): Delete declaration.
(munlock): Ditto.
(posix_madvise): Ditto.
* signal.cc: Remove obsolete sigcatchers stuff throughout.
(sigaction_worker): Add function name parameter and use it to show standard
syscall return value debugging output. Also add fault protection.
(sigaction): Accommodate extra argument to sigaction_worker.
(siginterrupt): Ditto.
* syscalls.cc (read): Remove obsolete sigcatchers stuff.
(readv): Ditto.
Throughout, change syscalls to report on return values using new %R format
option.
* smallprint.cc (__small_vsprintf): Add parsing for %R to report on return
values and possible errno from syscalls.
* errno.cc (errmap): Add PRIVILEGE_NOT_HELD.
* fhandler_tty.cc (fhandler_pty_master::setup): When creating a thread use
shorter name to reduce debuggging output.
* select.cc (start_thread_pipe): Ditto.
(start_thread_serial): Ditto.
(start_thread_socket): Ditto.
(start_thread_mailslot): Ditto.
* sigproc.cc (talktome): Ditto.
* cygpath.cc: Throughout, use cygwin_conv_path WIN_W rather than WIN_A
conversion.
(get_long_path_name_w32impl): Remove.
(get_long_name): Drop pre-Windows 2000 accommodations. Just call
GetLongPathNameW here directly.
(get_special_folder): Convert first parameter to WCHAR buffer pointer.
Drop conversion of result from WCHAR * to char *.
(do_sysfolders): Accommodate change to get_special_folder and only
convert result to char * last. Drop pre-Windows 2000 accommodations
and just call GetProfilesDirectoryW directly. Replace call to
GetWindowsDirectoryW with call to GetSystemWindowsDirectoryW.
Just call GetShortPathNameW directly.
(do_pathconv): Simplify buffer handling.
Allow all types of CCP conversions. Accommodate throughout.
(cygwin_conv_path): Use current ANSI or OEM codepage for WIN_A
conversions, depending on current file API codepage setting.
(cygwin_conv_path_list): Allow all CCP conversion types.
* include/sys/cygwin.h (CCP_CONVTYPE_MASK): Add to cygwin_conv_path_t
enum for convenience.
* mkpasswd.c: Ditto.
(psx_dir): Remove.
(current_user): Drop support for -m option. Use $HOME as is since it's
a POSIX path anyway.
(enum_users): Drop support for -m option.
(usage): Mention -m option as ignored.
(main): Drop support for -m option. Mark ignored options as deprecated.
* utils.sgml (mkpasswd): Remove description of -m option.
directly. Drop support for older Cygwin DLLs. Just use progname_long
as is since it's already a POSIX path now. Rename "tty" to "pty" as in
the Cygwin DLL. Call setlocale to make sure wcstombs does the right
thing according to the current locale.
* Makefile.in (ps.exe): Link against psapi.dll.
(signal_exit): Move to sigproc.cc.
* sigproc.cc (signal_exit): Move here. Declare stackdump extern. Set
my_sendsig to indicate that signals are no longer available.
(my_readsig): Make Static again.
(sig_send): Interpret ERROR_BROKEN_PIPE as ESRCH. Remove special-case EACCESS
errno setting, just setting errno generally, even for "its_me" case.
(_cygtls::signal_exit): ...here. Close my_readsig and comment on why.
* pinfo.cc (pinfo::exit): Move sigproc_terminate earlier. Set exiting flag in
lock_process.
* sigproc.cc (my_readsig): Make global.
* sync.cc (muto::exiting_thread): Delete.
(muto::acquire): Delete #if 0'ed code.
* sync.h (muto::exiting_thread): Delete.
(set_exiting_thread): Ditto.
(lock_process::lock_process): Don't worry about setting the exiting thread
since it had no meaning.
NtSetInformationProcess succeeded.
(handle_output_debug_string): Put back DebugActiveProcess since it seems to
still be needed (on my system at least). Detect new format
_STRACE_INTERFACE_ACTIVATE_ADDR which informs whether this is a forked process
or not. Use that to decide if forkdebug should be handled.
process of setting up the DLL and no name is known.
* dcrt0.cc (initial_env): Remove CYGWIN_SLEEP stuff.
(get_cygwin_startup_info): Activate strace here as appropriate.
(dll_crt0_0): Move get_cygwin_startup_info as early as possible to avoid
missing strace output.
* fork.cc (frok::child): Move debugging statement to point where ppid will be
set.
* pinfo.cc (pinfo::thisproc): Remove obsolete call to strace.hello. Tweak
debug output slightly.
* select.cc (select_stuff::wait): Allow APCS to be triggered while waiting
since we use them now. Report when that happens.
* sigproc.cc (child_info::child_info): Use strace.active() rather than
strace.attached().
* spawn.cc (child_info_spawn::worker): Only write strace child pid when we know
it's a cygwin process. Accommodate change to write_child argument list.
* strace.cc (strace::hello): Delete. Move functionality...
(strace::activate): ...to here.
(mypid): Just use raw GetCurrentProcessId () if myself isn't set.
(strace::write_childpid): Don't wait for subproc_ready. Remove arg which was
required for it.
* include/sys/strace.h (strace::hello): Delete.
(strace::write_childpid): Delete first argument.
* dcrt0.cc (get_cygwin_startup_info): Signal readiness when stracing since
strace::write_child relies on it. Use strace.activate to notify strace
process, passing in arg indicating whether we're forked.
* sigproc.cc (wait_sig): Accommodate new strace::activate argument.
* spawn.cc (child_info_spawn::worker): Oops. Previous suspended test was
actually correct. Revert and document.
* strace.cc (strace::activate): Send additional flag indicating whether this is
an attempt to activate a forked process.
(strace::hello): Report on windows pid.
* include/sys/strace.h (strace::strace): Make a dummy.
(strace::activate): Modify declaration to accept an argument.
(strace::write_childpid): Set regparm.
* child_info.h (child_info): Reorganize some elements so that the ones which
are initialized in a constructor are all together.
* sigproc.cc (child_info::child_info): Initialize values via the constructor
rather than as C statements and make sure that flags is set to zero initially.
* spawn.cc (child_info_spawn::worker): Use iscygwin() test for determining when
to send strace info since it is more foolproof than checking the suspend state.
"create_selectable". Change return to DWORD.
(fhandler_pty_common::pipesize): New constant.
* fhandler_fifo.cc (fhandler_fifo::fhandler_fifo): Reflect create_selectable
name change.
* miscfuncs.cc (CreatePipeOverlapped): Ditto.
* pipe.cc (fhandler_pipe::create): Ditto.
(fhandler_pipe::create): Rename from the misnamed "create_selectable". Return
DWORD. Only set pipe size to default when it is passed in as zero.
* fhandler_tty.cc (fhandler_pty_master::setup): Ditto. Use
fhandler_pty_common::pipesize rather than a raw constant.
* tty.cc (tty::not_allocated): Ditto.
* sigproc.cc (sigproc_init): Use create_selectable to create the signal pipe to
get a more appropriate message based pipe.
have been terminated prior to setting flag.
* signal.cc (sigwaitinfo): Zero event before closing to signal other threads
that it is no longer available.
instead of local dir variable and create handle not inheritable to
avoid accumulating stray handles in child processes.
(get_session_parent_dir): Ditto with session_parent_dir variable.
cygwin.bat.
(faq.using.emacs): Drop "CYGWIN=tty" setting.
* pathnames.sgml (pathnames-posixdevices): Align list of device names
with changes in 1.7.10.
* setup2.sgml (setup-env-ov): Drop text which assumes that Cygwin
processes are started in console window. Align wording to lessened
relevance of $CYGWIN. Don't use dropped CYGWIN setting in example.
(setup-locale-how): Put using console and Cygwin.bat file into
perspective.
(setup-locale-problems): Ditto.
(cygheap_exec_info::nchildren): Move from child_info_spawn.
(cygheap_exec_info::cchildren): Ditto.
(cygheap_exec_info::record_children): Declare new function.
(cygheap_exec_info::reattach_children): Ditto.
(cygheap_exec_info::alloc): Ditto.
(child_info_spawn::nchildren): Move to cygheap_exec_info.
(child_info_spawn::cchildren): Ditto.
* sigproc.cc (cygheap_exec_info::alloc): Define new function.
(child_info_spawn::cleanup): Accommodate move of children info to
cygheap_exec_info.
(cygheap_exec_info::record_children): Define new function.
(cygheap_exec_info::reattach_children): Ditto.
(child_info_spawn::record_children): Use cygheap_exec_info function to
accomplish this task.
(child_info_spawn::reattach_children): Ditto.
* spawn.cc (child_info_spawn::worker): Allocate moreinfo using
cygheap_exec_info::alloc.
* dcrt0.cc (child_info_fork::alloc_stack_hard_way): Use abort for the error to
avoid a retry.
Christopher Faylor
Corinna Vinschen
Chris Sutcliffe
Keith Marshall