Define fhandler:fifo::fixup_after_exec, which sets listen_client_thr
and lct_termination_evt to NULL. This forces the listen_client thread
to restart on the first attempt to read after an exec. Previously the
exec'd process could hang in fhandler_fifo::raw_read.
Remove fifo_client_handler::connect and move its code into
listen_client_thread. That way we can check the return status when a
client handler's connect_evt is signaled. Previously we incorrectly
assumed there was a successful connection.
Also simplify listen_client_thread in the following ways:
- Replace fhandler_fifo::disconnect_and_reconnect by a new
delete_client_handler method. Now we just delete invalid client
handlers rather than trying to re-use them.
- Try to maintain a client handler list that consists of connected
client handlers and exactly one that is listening for a connection.
This allows us to call WaitForMultipleObjects with only two wait
objects.
- Remove 'dummy_evt' from the fifo_client_handler struct; it is no
longer needed.
- On exit from listen_client_thread, delete the "extra" (listening)
client handler. Otherwise there could be a connection that doesn't
get recorded in the client handler list. This could happen when a
file descriptor is being duplicated.
Don't set the write end of the pipe to non-blocking mode if the FIFO
is opened in blocking mode.
In fhandler_fifo::raw_write in blocking mode, wait for the write to
complete rather than returning -1 with EAGAIN.
If the amount to write is large, write in smaller chunks (of size
determined by a new data member max_atomic_write), as in
fhandler_base_overlapped.
For convenience, add two new NTSTATUS codes, STATUS_THREAD_SIGNALED
and STATUS_THREAD_CANCELED, to ntdll.h.
After copyto is called, make the new fhandler's pipe_name point to the
new fhandler's pipe_name_buf, which is a *copy* of the old fhandler's
pipe_name_buf. Previously, get_pipe_name would return the wrong
result after a clone/dup, causing create_pipe_instance and open_pipe
to fail.
Also, stop the listen_client thread when cloning. Otherwise the
thread can keep accepting connections that the cloned fhandler won't
know about.
Do this via a new method fhandler_fifo::stop_listen_client, extracted
from fhandler_fifo::close.
Make read_ready a manual reset event. It should always be set shortly
after startup of the listen_client thread and remain set until the
thread terminates. (We don't want writers to connect without being
recorded in the client handler list.)
Remove the unnecessary code that checks for read_ready when a reader
is opening.
Add data members 'reader', 'writer', and 'duplexer' to the
fhandler_fifo class. Set them in fhandler_fifo::open. ('duplexer'
replaces the previous '_duplexer'.)
This will be useful in later commits.
The word "client" suggests something that holds a handle to the client
side of the pipe (in Windows terminology). But our
fifo_client_handlers hold a handle the server side of the pipe, and
they *connect* to clients.
If a FIFO is opened with O_RDWR access, create the pipe with
read/write access, and make the first client have the handle of that
pipe as its I/O handle.
Adjust fhandler_fifo::raw_read to account for the result of trying to
read from that client if there's no data.
Add a hit_eof method that tries to detect whether any clients are
connected. Before concluding that there are none, it gives the
listen_client thread time to update the client data.
Introduce a 'fifo_client_handler' structure that can be used by a
reader to communicate with a writer using an instance of the named
pipe. An fhandler_fifo opened for reading creates a thread that does
the following:
- maintains a list of fifo_client_handlers
- listens for_clients trying to connect
- creates new pipe instances as needed so that there's always at
least one available for connecting.
The pipe instances are initially created in blocking mode, but they
are set to be non-blocking after a connection is made.
fhandler_fifo::raw_read now loops through the connected clients and
reads from the first one that has data available.
New fhandler_fifo methods: add_client, listen_client,
listen_client_thread, check_listen_client_thread.
Replace the create_pipe method by create_pipe_instance, which allows
unlimited pipe instances.
New helper functions: create_event, set_pipe_non_blocking.
Make fhandler_fifo a derived class of fhandler_base instead of
fhandler_base_overlapped.
Replace the create_pipe macro, which is based on
fhandler_pipe::create, by new create_pipe and open_pipe methods.
These use NT functions instead of Win32 functions. Replace fifo_name
by get_pipe_name, which returns a pointer to a UNICODE_STRING.
Remove the fnevent macro, which would now be needed only once.
Add a raw_write method, adapted from fhandler_base::raw_write.
Adapt all functions to the changes above.
Bump GPLv2+ to GPLv3+ for some files, clarify BSD 2-clause.
Everything else stays under GPLv3+.
New Linking Exception exempts resulting executables from LGPLv3 section 4.
Add CONTRIBUTORS file to keep track of licensing.
Remove 'Copyright Red Hat Inc' comments.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
warnings between regparm definitions and declarations.
* smallprint.cc (__small_vswprintf): Conditionalize declaration and
setting of l_opt for only x86_64.
* spawn.cc (child_info_spawn::worker): Remove unused 'pid' variable.
* thread.cc (verifyable_object_isvalid): Temporarily define as
non-inline with gcc 4.7+, regardless of target.
(mainly in fhandler*) start fixing gcc 4.7.2 mismatch between regparm
definitions and declarations.
* gendef: Define some functions to take @ declaration to accommodate _regN
defines which use __stdcall.
* gentls_offsets: Define __regN macros as empty.
* autoload.cc (wsock_init): Remove unneeded regparm attribute.
* winsup.h (__reg1): Define.
(__reg2): Define.
(__reg3): Define.
* advapi32.cc (DuplicateTokenEx): Coerce some initializers to avoid warnings
from gcc 4.7.2.
* exceptions.cc (status_info): Declare struct to use NTSTATUS.
(cygwin_exception::dump_exception): Coerce e->ExceptionCode to NTSTATUS.
* fhandler_clipboard.cc (cygnativeformat): Redefine as UINT to avoid gcc 4.7.2
warnings.
(fhandler_dev_clipboard::read): Ditto.
* fhandler_fifo.cc (fhandler_fifo::arm): Define new function.
(fhandler_fifo::open): Fix handling of RDWR pipes to avoid opening a second
handle. Use arm() function to set events.
(fhandler_fifo::raw_read): Correctly go into "connect again logic" when we
detect another writer is available. Use arm() function to set event.
* pipe.cc (fhandler_pipe::create): Add more detail to debugging output.
for stuff".
* fhandler.cc (fhandler_base_overlapped::wait_overlapped): Use simplified arg
form of cygwait.
* fhandler_console.cc (fhandler_console::read): Ditto.
* fhandler_audio.cc (fhandler_dev_dsp::Audio_out::waitforspac): Ditto.
(fhandler_dev_dsp::Audio_in::waitfordata): Ditto.
* fhandler_fifo.cc (fhandler_fifo::wait): Ditto.
* fhandler_serial.cc (fhandler_serial::raw_read): Ditto.
(fhandler_serial::raw_write): Ditto.
* select.cc (cygwin_select): Ditto.
* sigproc.h (cygwait): Rename from cygWFMO. Define two argument and single
argument forms of this function.
* fhandler_tty.cc (fhandler_pty_slave::open): Use method to query if tty is
open.
(fhandler_pty_slave::read): Send SIGHUP when master is detected as closed.
(fhandler_pty_common::close): Close input_available_event in callers since
master may need to signal it first.
(fhandler_pty_master::close): Lie and set input_available_event when closing,
then close input_available_event.
(fhandler_pty_slave::close): Close input_available_event explicitly here.
* tty.h (tty::is_master_closed): Declare new method.
"create_selectable". Change return to DWORD.
(fhandler_pty_common::pipesize): New constant.
* fhandler_fifo.cc (fhandler_fifo::fhandler_fifo): Reflect create_selectable
name change.
* miscfuncs.cc (CreatePipeOverlapped): Ditto.
* pipe.cc (fhandler_pipe::create): Ditto.
(fhandler_pipe::create): Rename from the misnamed "create_selectable". Return
DWORD. Only set pipe size to default when it is passed in as zero.
* fhandler_tty.cc (fhandler_pty_master::setup): Ditto. Use
fhandler_pty_common::pipesize rather than a raw constant.
* tty.cc (tty::not_allocated): Ditto.
* sigproc.cc (sigproc_init): Use create_selectable to create the signal pipe to
get a more appropriate message based pipe.
an options argument for CreateNamedPipe/CreateFile. Change handle arguments to
expect pointers.
(fhandler_fifo::fifo_state): Delete.
(fhandler_fifo::dummy_client): Ditto.
(fhandler_fifo::open_nonserver): Ditto.
(fhandler_fifo::wait_state): Ditto.
(fhandler_fifo::raw_write): Ditto.
(fhandler_fifo::read_ready): New field.
(fhandler_fifo::write_ready): Ditto.
(fhandler_fifo::wait): Modify argument.
(fhandler_fifo::fifo_name): Add a new argument.
(fhandler_fifo::fixup_after_fork): New function.
* fhandler_fifo.cc (fhandler_fifo::fhandler_fifo): Remove initialization of
expunged elements. Initialize new handles to NULL.
(fhandler_fifo::open_nonserver): Delete.
(fnevent): New macro for creating a named event.
(fnpipe): New macro for creating a unique named pipe name.
(create_pipe): New macro for simplification of named pipe creation.
(fhandler_fifo::fifo_name): Use new argument when creating a shared name.
(fhandler_fifo::open): Rewrite. Use events to synchronize.
(pure_debug_printf): New macro, active only when DEBUGGING.
(fhandler_fifo::wait): Rewrite to wait for new fifo events which are supplied
as a parameter.
(fhandler_fifo::raw_read): Rewrite to use handle mechanism to detect
client-side disconnect.
(fhandler_fifo::raw_write): Delete.
(fhandler_fifo::close): Remove accommodations for expunged fields. Close event
handles.
(fhandler_fifo::dup): Remove accommodations for expunged fields. Duplicate
event handles.
(fhandler_fifo::fixup_after_fork): New function. Perform fixups on event
handles.
(fhandler_fifo::set_close_on_exec): Remove accommodations for expunged fields.
Set inheritance for new handle fields.
* miscfuncs.cc (CreatePipeOverlapped): Accommodate changes in
fhandler_pipe::create_selectable.
* tty.cc (tty::not_allocated): Ditto.
* pipe.cc (fhandler_pipe::create): Ditto.
(fhandler_pipe::create_selectable): Accept an extra open_mode argument. Pass
arguments by reference and allow opening one end of the pipe at a time.
* sys/strace.h (debug_only_printf): Define new macro which calls debug_printf
only when DEBUGGING is defined.
logs easier. Throughout, change /dev/tty* to /dev/pty*. Throughout, add flags
argument to fhandler_*::dup methods.
* devices.in: Rename (temporarily?) /dev/ttyN to /dev/ptyN. Add /dev/ptymN
devices for pty masters.
* devices.cc: Regenerate.
* devices.h (MAX_CONSOLES): Set to max number supported by devices.in.
(fh_devices::FH_PTMX): Rename from FH_PTYM.
(device::operator int): Return by reference.
* dtable.cc (fh_alloc): Take pc as an argument rather than just the device.
This makes debugging easier since more information is available. Actually
implement handling for already-allocated pty master devices. Make different
decisions when generating fhandler for not-opened devices. Add kludge to deal
with opening /dev/tty.
(cnew_no_ctor): New macro.
(build_fh_pc): Make debugging output more verbose. Use new clone() fhandler
interface to duplicate archetypes. Reset last term opened.
(dtable::dup_worker): Use Use new clone() fhandler interface to duplicate
archetypes. Pass flags to child dup handler.
(dtable::dup3): Set O_NOCTTY flag if newfd is not stdin/stdout/stderr.
* fhandler.cc (fhandler_base::reset): Rename from operator =() and reduce
functionality and sense of copy direction.
(fhandler_base::open_with_arch): Use published interface to query io_handle().
Use new copyto() fhandler method to copy from/to found archetype.
* fhandler.h: Throughout, delete size(), add copyout, clone, and fhandler_*
(void *) methods.
(fhandler_base::reset): Rename from operator =().
(fhandler_termios::is_dev_tty): Delete.
(fhandler_termios): change "protected" region to "private".
(fhandler_termios::is_dev_tty): Delete.
(fhandler_termios): Rearrange protected/public.
(fhandler_termios::fhandler_termios): Remember last fhandler_termios "opened".
(fhandler_termios::~fhandler_termios): Forget last fhandler_termios opened.
(ioctl): Rename from ioctl_termios. Take a void * argument. Reflect argument
change in pinfo::set_ctty.
(fhandler_console::dup): Declare new function. Set ctty here if appropriate.
(fhandler_pty_master::from_master): Privatize.
(fhandler_pty_master::to_master): Ditto.
(fhandler_pty_master::dwProcessId): Ditto.
(fhandler_pty_master::fhandler_pty_master): Add an `int' argument.
(fhandler_pty_master::open_setup): Declare new function.
(fhandler_pty_master::~fhandler_pty_master): Declare new method.
(fhandler_nodevice): Remove commented out function declaration.
* fhandler_console.cc: Use get_ttyp() instead of tc() throughout.
(fhandler_console::dup): Define new function to set controlling ctty on dup, as
appropriate.
(fhandler_console::ioctl): Reflect ioctl_termios name change.
(fhandler_console::setup): Rename from get_tty_stuff.
(fhandler_console::open_setup): Reflect argument change in pinfo::set_ctty.
(fhandler_console::fhandler_console): Set _tc here.
* fhandler_termios.cc (handler_termios::ioctl): Rename. Take a void * arg like
other ioctl functions.
* fhandler_tty.cc (fhandler_pty_slave::dup): Call myself->set_ctty to
potentially reset the controlling terminal.
(fhandler_pty_slave::ioctl): Reflect name/arg change for ioctl_termios.
(fhandler_pty_slave::fhandler_pty_slave): Take a "unit" argument. Call setup()
here so that we will know the unit number of this fhandler as soon as possible.
Set the unit as appropriate.
(handler_pty_master::open): Move most stuff to constructor and open_setup.
(handler_pty_slave::open_setup): Reflect argument change in pinfo::set_ctty.
(handler_pty_master::open_setup): Define new function.
(fhandler_pty_master::cleanup): Clear handles as a flag that the destructor
does not have to do "close" operations.
(fhandler_pty_master::close): Ditto.
(fhandler_pty_master::~fhandler_pty_master): Define new method.
(fhandler_pty_master::ioctl): Reflect name/arg change for ioctl_termios.
(fhandler_pty_master::setup): Allocate tty here. Rely on handles being
returned from allocated test rather than opening them here. Avoid setting
_need_nl here since it is already zeroed in the constructor. Set up device
information with DEV_TTYM_MAJOR.
* path.h (path_conv &operator =): Take a const argument.
(path_conv::dup): Ditto.
(pathconv_arg::PC_OPEN): New enum.
(pathconv_arg::PC_CTTY): Ditto.
(path_types::PATH_CTTY): Ditto.
(path_types::PATH_OPEN): Ditto.
(path_conv::isopen): New method.
(path_conv::isctty_capable): Ditto.
* path.cc (path_conv::check): Set PATH_OPEN and PATH_CTTY as appropriate.
* pipe.cc (fhandler_pipe::open): Use copyto to copy pipe handle.
* syscall.cc (open): Reinstate fd > 2 check to disallow resetting ctty on
non-std* handles.
* tty.cc (tty_list::allocate): Pass out handles for allocated tty. use
`not_allocated' to find unallocated ttys. Avoid keeping the lock since the
allocation of the tty should be sufficient to prevent multiple access.
(tty::not_allocated): Clarify comment. Rename. Return handles when an unused
tty is found. Simply test for existing tty.
(tty::exists): Rewrite to use `not_allocated'.
* tty.h (NTTYS): Reset down to actual number supported by devices.in.
(tty::not_allocated): Declare new function.
(tty_list::allocate): Pass out read/write tty handles. Zero them when not
found.
* fhandler_proc.cc: Reflect name change from FH_PTYM -> FH_PTMX.
* pinfo.h (pinfo::set_ctty): Reduce/reorder arguments passed in.
* pinfo.cc (pinfo::set_ctty): Ditto. Just use tc() built into the passed-in
fhandler_termios pointer. Return true if ctty is assigned.
* syscalls.cc (open): Call build_fh_pc with PC_OPEN flag. Set PC_CTTY if
appropriate.
(stat_worker): Remove is_dev_tty () stuff.
* fhandler.cc (MAX_OVERLAPPED_WRITE_LEN): New constant.
(MIN_OVERLAPPED_WRITE_LEN): Ditto.
(fhandler_base_overlapped::close): Accommodate change in arguments to
wait_overlapped.
(fhandler_base_overlapped::setup_overlapped): Add __stdcall and regparm
modifiers.
(fhandler_base_overlapped::destroy_overlapped): Ditto.
(fhandler_base_overlapped::has_ongoing_io): Ditto.
(fhandler_base_overlapped::wait_overlapped): Modify to return an enum returning
various states. Accept nonblocking parameter.
(fhandler_base_overlapped::read_overlapped): Add __stdcall and regparm
modifiers. Rework to attempt to be smarter about reacting to states returned
by wait_overlapped.
(fhandler_base_overlapped::write_overlapped): Ditto. Add fallback option for
when wait_overlapped detects that smaller chunks must be written.
(fhandler_base_overlapped::write_overlapped_fallback): Ditto.
* fhandler.h (DEFAULT_PIPEBUFSIZE): Move definition here from pipe.cc.
(fhandler_base::has_ongoing_io): Define with __stdcall and regparm modifiers.
(fhandler_base_overlapped::wait_return): New enum.
(fhandler_base_overlapped::max_atomic_write): New variable.
(fhandler_base_overlapped:: wait_overlapped): Accommodate changes mentioned
above to arguments and modifiers.
(fhandler_base_overlapped::setup_overlapped): Ditto for modifiers.
(fhandler_base_overlapped::read_overlapped): Ditto.
(fhandler_base_overlapped::write_overlapped): Ditto.
(fhandler_base_overlapped::destroy_overlapped): Ditto.
(fhandler_base_overlapped::has_ongoing_io): Ditto.
(fhandler_base_overlapped::fhandler_base_overlapped): Zero max_atomic_write.
* fhandler_fifo.cc (fhandler_fifo::fhandler_fifo): Set max_atomic_write to the
size of the DEFAULT_PIPEBUFSIZE.
(fhandler_fifo::wait): Accommodate change in arguments to wait_overlapped.
* pipe.cc (fhandler_pipe::fhandler_pipe): Set max_atomic_write to the size of
the DEFAULT_PIPEBUFSIZE.
(fhandler_pipe::create_selectable): Allow minimum size of DEFAULT_PIPEBUFSIZE.
(DEFAULT_PIPEBUFSIZE): Delete here, move to fhandler.h.
* miscfuncs.cc (yield): Rename from low_priority_sleep. Remove all of the
logic which called Sleep() and just use SwitchToThread.
* miscfuncs.h (yield): Rename from low_priority_sleep.
(SLEEP_0_STAY_LOW): Delete unused define.
* shared.cc (memory_init): Move heap_init() call directly after shared memory
initialization to more closely mimic long-standing program flow.
* tty.cc (tty_list::terminate): Replace call to low_priority_sleep with Sleep.
(pipe2): Export.
* dtable.cc (dtable::dup_worker): Take additional flags parameter.
Handle O_CLOEXEC flag.
(dtable::dup3): Rename from dup2. Take additional flags parameter.
Check for valid flags. Drop check for newfd == oldfd.
* dtable.h (dtable::dup_worker): Add flags parameter.
(dtable::dup3): Rename from dup2.
* fcntl.cc (fcntl64): Add F_DUPFD_CLOEXEC case.
* fhandler.h (fhandler_mailslot::get_object_attr): Add flags parameter.
* fhandler.cc (fhandler_base::open): Use security attribute with
inheritance according to setting of O_CLOEXEC flag.
* fhandler_console.cc (fhandler_console::open): Ditto.
* fhandler_fifo.cc (sec_user_cloexec): New inline function to
create security attribute with inheritance according to setting of
O_CLOEXEC flag.
(fhandler_fifo::open): Call sec_user_cloexec to fetch security
attribute.
(fhandler_fifo::wait): Ditto.
* fhandler_mem.cc (fhandler_dev_mem::open): Ditto.
* fhandler_mailslot.cc (fhandler_mailslot::get_object_attr): Take
additional flags parameter. Use security attribute with inheritance
according to setting of O_CLOEXEC flag.
(fhandler_mailslot::open): Call get_object_attr with flags parameter.
* fhandler_registry.cc (fhandler_registry::open): Call set_close_on_exec
on real handles to accommodate O_CLOEXEC flag.
* fhandler_tty.cc (fhandler_tty_slave::open): Ditto.
* fhandler_tape.cc: Create mutex with inheritance according to setting
of O_CLOEXEC flag.
* pipe.cc: Replace usage of O_NOINHERIT with O_CLOEXEC.
(fhandler_pipe::init): Simplify setting close_on_exec flag.
(fhandler_pipe::open): Remove setting close_on_exec flag.
(fhandler_pipe::create): Use security attribute with inheritance
according to setting of O_CLOEXEC flag.
(pipe2): New exported function.
* posix_ipc.cc: Throughout, open backing files with O_CLOEXEC
flag to follow POSIX semantics.
* security.h (sec_none_cloexec): New define.
* syscalls.cc (dup): Add missing extern "C" qualifier. Accommodate
renaming of dtable::dup2 to dtable::dup3.
(dup2): Ditto. Check newfd == oldfd here.
(dup3): New function. Check newfd == oldfd here.
(open): Set close_on_exec flag according to O_CLOEXEC flag before
calling fhandler->open.
* include/cygwin/version.h (CYGWIN_VERSION_API_MINOR): Bump.
according to context. Throughout, replace hMainThread with
GetCurrentThread/NtCurrentThread according to context.
* dcrt0.cc (dll_crt0_0): Drop duplication of GetCurrentProcess to
hMainProc. Drop duplication of GetCurrentThread to hMainThread.
* dtable.cc (dtable::stdio_init): Remove useless comment.
* globals.cc (hMainProc): Remove.
(hMainThread): Remove.
* ntdll.h (NtCurrentProcess): Define.
(NtCurrentThread: Define.
* dtable.cc (handle_to_fn): Add check for correct installation_key
string in object name for pipes and ttys.
* external.cc (cygwin_internal): Add CW_GET_INSTKEY to allow fetching
the installation_key from cygserver.
* fhandler_fifo.cc (fhandler_fifo::fifo_name): Add installation_key
to fifo name.
* globals.cc: Include cygprops.h.
(_RDATA): Move slightly and add comment.
(cygwin_props): Define.
* mount.cc (mount_info::init): Accommodate the fact that
installation_root is now a global variable in DLL common shared memory,
rather than a member of cygwin_shared.
* pipe.cc (fhandler_pipe::create_selectable): Add installation_key to
pipe name.
* shared.cc (installation_root): Define here for storage in DLL
common shared memory.
(installation_key): Ditto.
(installation_key_buf): Ditto.
(init_installation_root): Convert from shared_info method to ordinary
function. Add initializing installation_key. Invalidate
installation_key depending of value of disable_key property. Add
comment to explain.
(get_shared_parent_dir): Add installation_key to directory name.
(get_session_parent_dir): Ditto.
(shared_info::initialize): Move call to init_installation_root from
here...
(memory_init): ...to here. Add debug output to print installation root
and installation key. Add comment to explain why.
* shared_info.h (SHARED_INFO_CB): Recalculate.
(CURR_SHARED_MAGIC): Ditto.
(class shared_info): Remove definition of installation_root and
declaration of init_installation_root.
(init_installation_root): Declare.
(installation_root): Declare.
(installation_key): Declare.
* uinfo.cc (pwdgrp::load): Accommodate the fact that installation_root
is now a global variable in DLL common shared memory.
* include/cygwin/version.h: Bump API minor number.
(CYGWIN_INFO_INSTALLATIONS_NAME): Add.
* include/sys/cygwin.h (cygwin_getinfo_types): Add CW_GET_INSTKEY.
* sigproc.cc (wait_for_sigthread): Ditto. Don't synchronize with wait_sig
after receiving an event that it is ready to go.
(init_sig_pipe): New function.
(wait_sig): Call init_sig_pipe to create pipes for communicating signals to
this process. Don't send sigCONT signal when initializing.
* fork.cc (frok::child): Accommodate wait_for_sigpipe parameter change.
* fhandler.h (fhandler_*::write): Make ssize_t/__stdcall.
(fhandler_*::write_overlapped): Ditto.
(fhandler_*::raw_write): Ditto.
(fhandler_*::readv): Ditto.
(fhandler_*::writev): Ditto.
(fhandler_*::raw_read): Make __stdcall.
* fhandler: Accommodate changes to read/write functions throughout.
* fhandler_clipboard.cc: Ditto.
* fhandler_console.cc: Ditto.
* fhandler_dsp.cc: Ditto.
* fhandler_fifo.cc: Ditto.
* fhandler_mailslot.cc: Ditto.
* fhandler_mem.cc: Ditto.
* fhandler_mem.cc: Ditto.
* fhandler_random.cc: Ditto.
* fhandler_tape.cc: Ditto.
* fhandler_tty.cc: Ditto.
* fhandler_virtual.cc: Ditto.
* fhandler_windows.cc: Ditto.
* fhandler_zero.cc: Ditto.
* syscalls.cc (readv): Use ssize_t as temp variable.
* fhandler.cc (fhandler_base::read): Coerce returned len to signed or it will
never be treated as < 0.
(fhandler_base::wait_overlapped): Minimize calls to GetLastError. Remove
duplicate debugging test. Fix error return.
* fhandler.h (fhandler_fifo::fifo_name): Declare new function.
(fhandler_fifo::close): Ditto.
(fhandler_fifo::dup): Ditto.
(fhandler_fifo::close_on_exec): Ditto.
* fhandler.cc (fhandler_fifo::fifo_name): Define new function.
(FIFO_BUF_SIZE): New define.
(cnp): Ditto.
(fhandler_fifo::open): Rework. Use cnp to open named pipe. Always open write
side as a client. Open dummy client when writing and can't connect.
(wait): Rework. Implement fifo_wait_for_next_client. Handle signals during
connect better. Add new fifo_wait_for_server code which polls
(sigh) waiting for server.
(fhandler_fifo::raw_read): Handle transition states when one client closes and
another is available.
(fhandler_fifo::close): Define.
(fhandler_fifo::dup): Ditto.
(fhandler_fifo::close_on_exec): Ditto.
Ken Brown
Takashi Yano
Corinna Vinschen
Yaakov Selkowitz
Christopher Faylor