been set by a previous function.
* dtable.h (dtable::extend): Accept second size_t argument.
* dtable.cc (dtable::extend): Accept second "min" argument which allows
checking for OPEN_MAX_MAX boundary conditions.
(dtable_init): Accommodate second argument to dtable::extend.
(dtable::find_unused_handle): Ditto.
* syscalls.cc (setdtablesize): Ditto.
(dup): Return any error passed by cygheap_fdnew() directly.
(getdtablesize): Just return dtable size directly.
through the bottom.
(cygwin_attach_handle_to_fd): Make sure that fd tab is locked for the duration
of this function.
* dtable.h (dtable::lock): Make public.
(dtable::unlock): Ditto.
(dtable): Remove friends.
* devices.cc: Regenerate.
* dtable.h (struct dtable): Make fhandler_base friend, rather
than fhandler_disk_file.
* fhandler.cc (fhandler_base::open_with_arch): Create unique id.
(fhandler_base::cleanup): Call del_my_locks.
(fhandler_base::fcntl): Handle F_GETLK, F_SETLK and F_SETLKW.
* fhandler.h (fhandler_base::get_dev): Return real device number.
(fhandler_base::set_unique_id): New inline method.
(fhandler_disk_file::lock): Drop declaration.
(fhandler_disk_file::get_dev): New method, return pc.fs_serial_number.
(fhandler_dev_zero::open): Drop declaration.
* fhandler_disk_file.cc (fhandler_disk_file::close): Move
del_my_locks call to fhandler_base::open_with_arch.
(fhandler_disk_file::fcntl): Move handling of locking commands to
fhandler_base::fcntl.
(fhandler_base::open_fs): Drop call to NtAllocateLocallyUniqueId.
* fhandler_zero.cc (fhandler_dev_zero::open): Remove so that default
fhandler_base::open is used to open \Device\Null.
* flock.cc (fixup_lockf_after_exec): Finding a single fhandler is
enough here.
(fhandler_base::lock): Replace fhandler_disk_file::lock. Refuse to lock
nohandle devices. Handle read/write test using POSIX flags. Explain
why. Never fail on SEEK_CUR or SEEK_END, rather assume position 0,
just as Linux.
* net.cc (fdsock): Create unique id.
(mainly in fhandler*) start fixing gcc 4.7.2 mismatch between regparm
definitions and declarations.
* gendef: Define some functions to take @ declaration to accommodate _regN
defines which use __stdcall.
* gentls_offsets: Define __regN macros as empty.
* autoload.cc (wsock_init): Remove unneeded regparm attribute.
* winsup.h (__reg1): Define.
(__reg2): Define.
(__reg3): Define.
* advapi32.cc (DuplicateTokenEx): Coerce some initializers to avoid warnings
from gcc 4.7.2.
* exceptions.cc (status_info): Declare struct to use NTSTATUS.
(cygwin_exception::dump_exception): Coerce e->ExceptionCode to NTSTATUS.
* fhandler_clipboard.cc (cygnativeformat): Redefine as UINT to avoid gcc 4.7.2
warnings.
(fhandler_dev_clipboard::read): Ditto.
* fhandler.h (fhandler_base::refcnt): Delete.
(fhandler_base::inc_refcnt): New function.
(fhandler_base::dec_refcnt): New function.
* cygheap.h (cygheap_fdnew::~cygheap_fdnew): Accommodate split of refcnt to
inc_refcnt/dec_refcnt.
(cygheap_fdget::cygheap_fdget): Ditto.
(cygheap_fdget::~cygheap_fdget::cygheap_fdget): Ditto.
* dtable.cc (dtable::release): Ditto.
(cygwin_attach_handle_to_fd): Ditto.
(dtable::init_std_file_from_handle): Ditto.
(dtable::dup3): On success, return with fdtab locked.
* dtable.h (dtable): Add dup_finish as a friend.
* syscalls.cc (dup_finish): Define new function. Increment refcnt while fdtab
is locked.
(dup2): Use common dup_finish() to perform dup operation.
(dup3): Ditto.
(dtable::fixup_after_exec): Use fixup_close() and detect when it was not
possible to open an inherited file handle.
(dtable::fixup_after_fork): Defensively close any file handles which were not,
for some reason, inheritable.
* dtable.h: Make #pragma once.
(dtable::fixup_close): Declare new function.
* fhandler_console.cc (fhandler_console::set_unit): Set I/O handles to NULL
when this function fails.
* dtable.cc (dtable::release): Make void again. Skip not_open check since it
is guaranteed to be open. Don't bother deleting here since actual deletion
will be handled in cygheap_fdget::~cygheap_fdget.
* dtable.h (dtable::release): Make void again.
* syscalls.cc (dup2): Bump fhandler use count on successful dup.
* cygheap.h
(cygheap_fdmanip::release): Make virtual.
(cygheap_fdnew::~cygheap_fdnew): New destructor increments reference count when
fd has been allocated.
(cygheap_fdget::fh): New (old?) field.
(cygheap_fdget::cygheap_fdget): Increment reference count when we've found an
active fd. Set fh appropriately.
(cygheap_fdget::~cygheap_fdget): Decrement reference count when appropriate.
Delete fh if reference count goes to zero.
(cygheap_fdget::release): New function. Do more bookkeping on release.
* dtable.cc (dtable::release): Change from void to boolean return. Only delete
the fhandler when its reference count is <= 0 (this should be a fairly unusual
case). Return true if fhandler has been deleted.
(cygwin_attach_handle_to_fd): Increment reference count when fh is assigned.
(dtable::init_std_file_from_handle): Ditto.
* dtable.h (dtable::release): Change return to boolean.
* fhandler.cc (fhandler_base::fhandler_base): Set new isclosed flag to false.
Set _refcnt to zero.
(fhandler_base::close): Simplify paranoid debugging output. Set new isclosed()
flag.
(fhandler_base_overlapped::wait_overlapped): Use isclosed() flag to avoid
querying the exception handle.
* fhandler.h (fhandler_base::_refcnt): New field.
(fhandler_base::refcnt): New function.
(fhandler_base::isclosed): Implement.
(fhandler_base::fhandler_base): Set isclosed to false.
* syscalls.cc: Remove space after function before parentheses for several
strace printfs.
(dup): Add standard strace "leaver" code.
(dup2): Ditto.
(dup3): Ditto.
(remove): Ditto.
(getpid): Ditto.
(getppid): Ditto.
(lseek64): Fix strace debugging to correctly use %R.
* fhandler_termios.cc (fhandler_termios::tcsetpgrp): Avoid sending signals to
other processes if we're debugging since it can cause a deadlock with the
calling debugger.
* exceptions.cc (_cygtls::call_signal_handler): Add debugging-only strace
output.
(dtable::init_std_file_from_handle): Close console handle early, before
initialization. Build up openflags for passing to open_setup, just to be safe.
(last_tty_dev): New variable.
(fh_last_tty_dev): New macro.
(fh_alloc): Try again to keep track of previously opened tty, this time by just
saving the device and using that to potentially open an archetype. Avoid
setting the "/dev/tty" name if the creation of the fhandler failed.
(build_fh_pc): Remove unused second argument. Reorganize how and where the
name is set. Set last_tty_dev as appropriate. Avoid a NULL dereference in a
debug printf.
* dtable.h (build_fh_pc): Reflect removal of second parameter.
* fhandler.cc (fhandler_base::reset): Use new '<<' operator to copy pc since it
preserves any potentially previously set name.
(fhandler_base::set_name): Ditto.
* fhandler.h (fhandler_*::clone): Throughout use ccalloc to allocate new
fhandler, primarily to make sure that pc field is properly zeroed.
(fhandler_termios::last): Eliminate.
(fhandler_termios): Remove setting of last.
(fhandler_base::~fhandler_termios): Ditto.
* fhandler_console.cc (fhandler_console::open): Don't make decisions about
opening close-on-exec handles here since it makes no sense for archetypes.
(fhandler_console::init): Assume that input handle has already been opened.
* fhandler_termios.cc (fhandler_termios::last): Delete.
* path.h (path_conv::eq_worker): New function. Move bulk of operator = here.
(operator <<): New function.
(operator =): Use eq_worker to perform old functionality.
(pipe2): Export.
* dtable.cc (dtable::dup_worker): Take additional flags parameter.
Handle O_CLOEXEC flag.
(dtable::dup3): Rename from dup2. Take additional flags parameter.
Check for valid flags. Drop check for newfd == oldfd.
* dtable.h (dtable::dup_worker): Add flags parameter.
(dtable::dup3): Rename from dup2.
* fcntl.cc (fcntl64): Add F_DUPFD_CLOEXEC case.
* fhandler.h (fhandler_mailslot::get_object_attr): Add flags parameter.
* fhandler.cc (fhandler_base::open): Use security attribute with
inheritance according to setting of O_CLOEXEC flag.
* fhandler_console.cc (fhandler_console::open): Ditto.
* fhandler_fifo.cc (sec_user_cloexec): New inline function to
create security attribute with inheritance according to setting of
O_CLOEXEC flag.
(fhandler_fifo::open): Call sec_user_cloexec to fetch security
attribute.
(fhandler_fifo::wait): Ditto.
* fhandler_mem.cc (fhandler_dev_mem::open): Ditto.
* fhandler_mailslot.cc (fhandler_mailslot::get_object_attr): Take
additional flags parameter. Use security attribute with inheritance
according to setting of O_CLOEXEC flag.
(fhandler_mailslot::open): Call get_object_attr with flags parameter.
* fhandler_registry.cc (fhandler_registry::open): Call set_close_on_exec
on real handles to accommodate O_CLOEXEC flag.
* fhandler_tty.cc (fhandler_tty_slave::open): Ditto.
* fhandler_tape.cc: Create mutex with inheritance according to setting
of O_CLOEXEC flag.
* pipe.cc: Replace usage of O_NOINHERIT with O_CLOEXEC.
(fhandler_pipe::init): Simplify setting close_on_exec flag.
(fhandler_pipe::open): Remove setting close_on_exec flag.
(fhandler_pipe::create): Use security attribute with inheritance
according to setting of O_CLOEXEC flag.
(pipe2): New exported function.
* posix_ipc.cc: Throughout, open backing files with O_CLOEXEC
flag to follow POSIX semantics.
* security.h (sec_none_cloexec): New define.
* syscalls.cc (dup): Add missing extern "C" qualifier. Accommodate
renaming of dtable::dup2 to dtable::dup3.
(dup2): Ditto. Check newfd == oldfd here.
(dup3): New function. Check newfd == oldfd here.
(open): Set close_on_exec flag according to O_CLOEXEC flag before
calling fhandler->open.
* include/cygwin/version.h (CYGWIN_VERSION_API_MINOR): Bump.
* autoload.cc (WSADuplicateSocketW): Define.
(WSASocketW): Define.
* dtable.cc (dtable::release): Call dec_need_fixup_before if necessary.
(dtable::fixup_before_fork): New function.
(dtable::fixup_before_exec): New function.
* dtable.h (class dtable): Add member cnt_need_fixup_before. Add
declarations for above new functions.
(dtable::dec_need_fixup_before): New inline method.
(dtable::inc_need_fixup_before): New inline method.
(dtable::need_fixup_before): New inline method.
* fhandler.h (fhandler_base::fixup_before_fork_exec): New virtual
method.
(fhandler_base::need_fixup_before): New virtual method.
(class fhandler_socket): Add member prot_info_ptr.
(fhandler_socket::init_fixup_before): Declare.
(fhandler_socket::need_fixup_before): New inline method.
(fhandler_socket::fixup_before_fork_exec): Declare.
(fhandler_socket::fixup_after_exec): Declare.
* fhandler_socket.cc (fhandler_socket::fhandler_socket): Initialize
prot_info_ptr to NULL.
(fhandler_socket::~fhandler_socket): Free prot_info_ptr conditionally.
(fhandler_socket::init_fixup_before): New method.
(fhandler_socket::fixup_before_fork_exec): Ditto.
(fhandler_socket::fixup_after_fork): Use WSASocketW to duplicate
socket if necessary.
(fhandler_socket::fixup_after_exec): New method.
(fhandler_socket::dup): Use fixup_before_fork_exec/fixup_after_fork
to duplicate socket if necessary.
* fork.cc (frok::parent): Start child suspended if some fhandler
needs fixup before fork. If so, call dtable::fixup_before_fork after
CreateProcess and resume child.
* net.cc (fdsock): Try to find out if socket needs fixup before and
initialize socket accordingly. Add HUGE comment to explain what happens
and why.
* spawn.cc (spawn_guts): Start child suspended if some fhandler needs
fixup before exec. If so, call dtable::fixup_before_exec after
CreateProcess.
whether set_name should be called or not.
(dtable::dup_worker): Call build_fh_pc with new second parameter set
to false. Explain why. If fhandler's dup failed, delete rather than
cfree newfh and set newfh to NULL to indicate failure correctly.
* dtable.h (build_fh_pc): Change declaration according to above change.
Default set_name parameter to true.
* mmap.cc (mmap_record::free_fh): Delete rather than cfree fh.
(select_record::select_record): Define do-nothing constructor for "new" to
avoid gratuitous zeroing.
(select_info): New base class.
(select_pipe_info): New class with methods for dealing with pipes.
(select_socket_info): New class with methods for dealing with sockets.
(select_serial_info): Dummy class for serial.
(select_mailslot_info): Dummy class for mailslots.
(select_stuff): Define device_specific_* as actual classes rather than void *.
* dtable.h (dtable::select_read): Accommodate return value change to 'bool' and
argument change to "select_stuff".
(dtable::select_write): Ditto.
(dtable::select_except): Ditto.
* dtable.cc (dtable::select_read): Accommodate return value change to 'bool'
and argument change to "select_stuff".
(dtable::select_write): Ditto.
(dtable::select_except): Ditto.
* fhandler.h: Excise select-related classes.
(fhandler_*::select_read): Change argument to select_stuff.
(fhandler_*::select_write): Ditto.
(fhandler_*::select_except): Ditto.
* select.cc (UNIX_FD_ZERO): Use memset rather than bzero.
(select_stuff::test_and_set): Change return type to bool. Allocate
select_record on entry and let fhandler_*::select_* operate on the start.next
field of select_stuff.
(pipeinf): Delete.
(select_pipe_info::select_pipe_info): New constructor. Allocates event for
controlling pipe waits.
(select_pipe_info::~select_pipe_info): New destructor. Destroy event. Stop
thread.
(select_pipe_info::add_watch_handle): New function.
(thread_pipe): Wait for the hEvent part of any overlapped pipes before peeking.
(start_thread_pipe): Don't allocate device_specific_pipe stuff here. Assume
that it has been allocated earlier.
(pipe_cleanup): Rely on select_pipe_info destructor to clean up pipe
paraphenalia.
(fhandler_*::select_*): Derive select_record from new select_stuff argument.
(fhandler_pipe::select_*): Ditto. Allocate pipe-specific field if not already
allocated.
(serialinf): Delete.
(thread_serial): serialinf -> select_serial_info.
(fhandler_base::ready_for_read): Rewrite to accommodate change in argument to
fhandler_*::select_*.
(socketinf): Delete.
(thread_socket): socketinf -> select_socket_info.
(mailslotinf): Delete.
(thread_mailslot): mailslotinf -> select_mailslot_info.
* pinfo.cc (status_exit): New function. Issue message when dll not found. Use
find_first_notloaded_dll to find a nonexistent dll.
(pinfo::maybe_set_exit_code_from_windows): Call status_exit when exit code >=
0xc0000000UL.
* sigproc.cc (child_info::proc_retry): Return exit code when
STATUS_DLL_NOT_FOUND.
* spawn.cc (spawn_guts): Minor cleanup.
* syscalls.cc (close_all_files): Don't actually close stderr filehandle. Just
make it noninheritable.
* winsup.h (find_first_notloaded_dll): Declare new function.
* ntdll.h: Add several missing NTSTATUS defines.
constants.
(dtable::init_std_file_from_handle): Reorganize pipe handling to try to catch
special tty case.
(build_fh_name_worker): Declare for common use.
(build_fh_name): Define char version.
(build_fh_name): Define (currently unused) UNICODE_STRING version.
(decode_tty): Detect if pipe is actually a cygwin tty, returning the tty name
in the buffer.
(handle_to_fn): Reorganize to use wide characters.
* dtable.h (build_fh_name): Declare (currently unused) UNICODE_STRING version.
* fhandler_tty.cc (fhandler_pty_master::setup): Use
fhandler_pipe::create_selectable to create a pipe with a given name.
* pipe.cc (pipe_handler): Make returned handle inheritable.
(fhandler_pipe::create_selectable): Take an optional name. Use a standard
cygwin introducer for the name.
* path.cc (path_conv::check): Make first argument const.
* path.h (path_conv::check): Ditto for declaration.
(path_conv::path_conv): Ditto for UNICODE_STRING version.
(child_info_spawn::__stdin): Ditto.
(CURR_CHILD_INFO_MAGIC): Regenerate.
* dcrt0.cc (check_sanity_and_sync): Minor cleanup.
(child_info_spawn::handle_spawn): Handle new __std* elements by calling
move_fd.
* dtable.cc (dtable::move_fd): Define new function.
* dtable.h (dtable::move_fd): Declare new function.
* fhandler.h (fhandler_pipe::popen_pid): Declare new element.
* fhandler.h (fhandler_pipe::get_popen_pid): Define new function.
* fhandler.h (fhandler_pipe::set_popen_pid): Ditto.
* pipe.cc (fhandler_pipe::fhandler_pipe): Zero popen_pid.
(fhandler_pipe::dup): Ditto.
* spawn.cc (handle): Change second argument to bool.
(spawn_guts): Accept __stdin/__stdout arguments and set them appropriately in
child_info structure and in STARTUPINFO structure.
* syscalls.cc (popen): New cygwin-specific implementation using spawn.
(pclose): Ditto.
* winsup.h (spawn_guts): Accommodate new arguments for spawn_guts.
* fhandler.cc (fhandler_base::set_no_inheritance): Make second arg a bool.
* fhandler.h (fhandler_base::set_no_inheritance): Ditto for declaration.
* child_info.h (child_info::msv_count): Rename from the now-inappropriate
"zero".
(child_info_spawn::filler): Add filler to work around Vista bug.
(child_info_fork::filler): Ditto.
* dcrt0.cc (get_cygwin_startup_info): Remove "zero" check since it is now
always filled out.
* fork.cc (frok::parent): Move ch.zero manipulation to constructor.
* spawn.cc (spawn_guts): Ditto. Remove _ch wrapper.
* sigproc.cc (child_info::child_info): Initialize starter[].
* shared.cc (shared_info::heap_slop_size): Remove noisy system_printfs.
* shared_info.h (CURR_SHARED_MAGIC): Regenerate.
deadlocks.
(class locked_process): Move to another header.
* sync.h (lock_process): Define here.
* cygtls.cc (_cygtls::fixup_after_fork): Reset spinning state as well as
stacklock state.
* dcrt0.cc (lock_process::locker): Define.
(dtable::lock_cs): Delete.
* dtable.cc (dtable_init): Eliminate call to init_lock().
(dtable::fixup_after_fork): Ditto.
(dtable::init_lock): Delete definition.
* dtable.h (dtable::init_lock): Delete declaration.
(dtable::lock): Use process lock rather than dtable-specific lock.
(dtable::unlock): Ditto.
* sigproc.cc (sigproc_init): Minor change to debugging output.
* times.cc (utime_worker): Use build_fh_pc rather than reinterpreting the posix
path name again. Return any error from path_conv immediately.
cygthread to handle extra argument, throughout.
* cygthread.h (cygthread::callproc): Declare new method.
(cygthread::cygthread): Add optional length argument to allow copying arguments
to executing thread.
* cygthread.cc (cygthread::callproc): Define new method.
(cygthread::stub): Use callfunc to invoke thread func to allow potentially
allocating stack memory which will be returned.
(cygthread::simplestub): Ditto.
(cygthread::cygthread): Accept arglen argument. Reset ev here prior to
activating thread. Wait for ev after activating thread if we're copying
contents to the thread. Wait until the end before setting h, to allow thread
synchronization.
(cygthread::release): Don't reset ev here. Rely on that happening the next
time the thread is activated.
* pinfo.h (commune_process): Rename declaration from _pinfo::commune_process.
* pinfo.cc (commune_process): Ditto for definition. Modify slightly to allow
running as a separate cygthread.
* sigproc.cc (child_info::sync): Always wait for both subproc_ready and any
hProcess if we have a cygwin parent.
(talktome): Change argument to be a pointer to siginfo_t. Contiguously
allocate whole siginfo_t structure + any needed extra for eventual passing to
commune_process thread.
(wait_sig): Accommodate change in talktome argument.
* pipe.cc (fhandler_pipe::fixup_after_exec): Remove debugging.
* dtable.h (class dtable): Add class process_lock as a friend.
* dcrt0.cc (get_exit_lock): Delete.
(do_exit): Use process_lock class instead of get_exit_lock.
* exceptions.cc (signal_exit): Ditto.
* pinfo.cc (pinfo::exit): Ditto.
(_pinfo::commune_process): Set process lock around this whole function.
(_pinfo::commune_request): Use process_lock rather than myself.lock.
* pinfo.h (pinfo::_lock): Delete.
(pinfo::initialize_lock): Delete.
(pinfo::lock): Delete.
(pinfo::unlock): Delete.
* winsup.h (get_exit_lock): Delete declaration.
* winsup.h (close_all_files): Reflect argument change.
* dtable.cc (close_all_files): Ditto.
* dtable.h: Ditto.
* fhandler.h: Ditto.
* spawn.cc (spawn_guts): Move close_all_files back to its original location in
first P_OVERLAY test but use argument denoting that handles are only supposed
to be closed, not released (more work to be done here).
* syscalls.cc (close_all_files): Take an argument denoting whether to release
closed files or not.
* path.cc (symlink): Change argument names to reflect linux man page.
(symlink_worker): Ditto. Also appropriately set ENOENT for empty strings.
(child_info::dwProcessId): New field.
* cygheap.cc (init_cheap): Delete.
(dup_now): Ditto.
(cygheap_setup_for_child): Ditto.
(cygheap_setup_for_child_cleanup): Ditto.
(cygheap_fixup_in_child): Simplify. Use new "child_copy" function to copy heap
from parent.
(_csbrk): Don't attempt allocation if within cygheap section. Fix so that more
than one allocation will succeed.
(cygheap_init): Reset possibly-nonzero region to zero.
* cygheap.h (cygheap_setup_for_child): Delete declaration.
(cygheap_setup_for_child_cleanup): Ditto.
(cygheap_start): Define as an array.
* cygwin.sc: Modernize. Remove unneeded sections. Define cygheap here.
* dcrt0.cc (do_exit): Reflect argument change to close_all_files.
* dtable.cc (dtable::vfork_parent_restore): Ditto.
* dtable.h: Ditto.
* fhandler.h: Ditto.
* fork.cc (fork_copy): Call ReadProcessMemory if there is no thread
(indicating that we're execing).
(fork_child): Don't mess with hParent.
(fork_parent): Remove hParent stuff. It happens earlier now. Remove call to
cygheap_setup_for_child* stuff.
(fork): Put child_info_stuff in grouped structure. Issue error if parent
handle is not set.
(child_copy): New function.
* sigproc.cc (child_info::child_info): Put cygheap settings here. Set parent
handle.
(child_info::~child_info): Close parent handle if it exists.
* spawn.cc (spawn_guts): Reorganize so that ciresrv is allocated at only the
last minute so that cygheap changes are reflected. Delete cygheap_setup*
calls.
* syscalls.cc (close_all_files): Add an argument to flag when the fd entry
should be released.
* winsup.h (close_all_files): Add an argument to close_all_files declaration.
Declare child_copy.
fhandlers.
* dtable.h (class dtable): Add cygheap_fdenum as friend class.
* fhandler.h (fhandler_base::get_proc_fd_name): New virtual method
to return a name for /proc/<pid>/fd.
(fhandler_socket::get_proc_fd_name): Ditto.
(fhandler_pipe::get_proc_fd_name): Ditto.
(fhandler_virtual::opendir): Make virtual method.
(fhandler_process::opendir): New method.
* fhandler.cc (fhandler_base::get_proc_fd_name): New method.
* fhandler_process.cc: Include ctype.h.
(PROCESS_FD): Define.
(process_listing): Add "fd".
(fhandler_process::exists): Fix comment. Return 1 in case of "fd"
directory. Handle files below "fd".
(fhandler_process::fstat): Drop "self" handling. Set correct link
count for directories.
(fhandler_process::opendir): New method to handle "fd" directory.
(fhandler_process::readdir): Add "fd" handling.
(fhandler_process::open): Drop "self" handling.
(fhandler_process::fill_filebuf): Ditto. Add "fd" handling. Fix
"maps" output string.
* fhandler_registry.cc (fhandler_registry::fstat): Set correct link
count for directories.
* fhandler_socket.cc (fhandler_socket::get_proc_fd_name): New method.
* path.cc (symlink_info::set): Fix thinko.
* pinfo.cc (_pinfo::commune_recv): Rename pathbuf to path throughout.
Drop local path variable in PICOM_FIFO case. Fix debug output.
Close handles as early as possible. Add PICOM_FDS and PICOM_FD
handling.
(_pinfo::commune_send): Add PICOM_FDS and PICOM_FD handling.
(_pinfo::fd): New method.
(_pinfo::fds): New method.
* pinfo.h (enum picom): Add PICOM_FDS and PICOM_FD.
(_pinfo::fd): Declare.
(_pinfo::fds): Declare.
* pipe.cc (fhandler_pipe::get_proc_fd_name): New method.
* cygwin.din: Make clock SIGFE. Add clock_gettime, sigwaitinfo, timer_create,
timer_delete, timer_settime.
* include/cygwin/version.h: Reflect above additions.
* fork.cc (fork_child): Call fixup_timers_after_fork.
* signal.cc (sigwait): Remove unused variable.
* timer.cc: New file.
(clock_gettime): Define new function.
(timer_tracker): Define new struct used by timer functions.
(timer_tracker::timer_tracker): New function.
(to_us): New function.
(timer_thread): New function.
(timer_tracker::settime): New function.
(timer_create): New function.
(timer_settime): New function.
(timer_delete): New function.
(fixup_timers_after_fork): New function.
* cygthread.cc: Bump thread count.
* signal.cc (sigwaitinfo): Define new function.
(sigwait): Redefine based on sigwaitinfo.
* include/cygwin/signal.h (sigwaitinfo): Declare.
(sigwait): Ditto.
* dtable.cc (dtable::vfork_parent_restore): Avoid double close of ctty when
ctty == ctty_on_hold.
* cygtls.h (_threadinfo::threadkill): New element.
(_threadinfo::set_threadkill): Declare new function.
(_threadinfo::reset_threadkill): Declare new function.
* dcrt0.cc (dcrt0_1): Call here so that it will be possible to attach to
running process with #(*& Windows Me/9x.
(initial_env): Try to initialize strace if uninitialized.
* gendef: Don't zero signal if threadkill is set since that will happen in the
called function.
* signal.cc (sigwait): Ensure cleanup in error conditions.
* sigproc.cc (sig_send): Clear packet mask storage.
(wait_subproc): Fill in child exit code in siginfo_t structure.
* thread.cc (pthread_kill): Set threadkill flag.
* tlsoffsets.h: Regenerate. Throughout, use siginfo_t to fill out all signal
information for "kernel" signals.
* cygtls.h (_threadinfo::set_siginfo): Declare new function.
* cygtls.cc (_threadinfo::set_siginfo): Define new function.
* dcrt0.cc (do_exit): Accommodate siginfo_t considerations.
* exceptions.cc (handle_exceptions): Ditto.
(sig_handle_tty_stop): Ditto.
(ctrl_c_handler): Use killsys() to send signal.
(sigpacket::process): Rename from sig_handle. Use siginfo_t field from
sigpacket for everything.
(tty_min::kill_pgrp): Accommodate siginfo_t considerations.
(fhandler_termios::bg_check): Ditto.
* fhandler_tty.cc (fhandler_tty_slave::ioctl): Use killsys() to send signal.
* signal.cc (kill_worker): Rewrite to use siginfo_t second argument.
(kill_pgrp): Ditto.
(kill0): Define new function pulled from kill().
(kill): Rewrite as frontend to kill0.
(killsys): Define new function.
* sigproc.cc (sigelem): Eliminate.
(sigpacket): Move to sigproc.h. Subsume sigelem.
(pending_signals): Use sigpacket rather than sigelem for everything.
(sig_clear): Ditto.
(wait_sig): Ditto.
(sig_send): Rewrite to use siginfo_t argument.
(sig_send): New function wratpper to sig_send with siginfo_t argument.
(wait_subproc): Accommodate siginfo_t considerations.
* thread.cc (pthread_kill): Ditto.
* sigproc.h (sigpacket): Move here.
(sigpacket::process): Declare "new" function.
(sig_handle): Eliminate declaration.
(sig_send): Declare with new paramaters.
(killsys): Declare new function.
(kill_pgrp): Declare.
* winsup.h: Move some signal-specific stuff to sigproc.h.
* include/cygwin/signal.h: Tweak some siginfo_t stuff.
compiler bug.
* autoload.cc (TryEnterCriticalSection): Remove.
* dcrt0.cc (dll_crt0_0): Delete inappropriate setting of _my_tls.stackptr to
NULL since it has really bad consequences. Make 'si' an automatic variable.
* cygtls.cc (_threadinfo::init_thread): Correct thinko which caused thread list
to be allocated every time.
* cygtls.h (CYGTLS_PADSIZE): Define as const int.
* sync.h: Make multiple inclusion safe.
(muto::next): Eliminate.
(muto::exiting_thread): New variable.
(muto::set_exiting_thread): New function.
(new_muto): Change to use different section for mutos since c++ give
inexplicable warning in some cases otherwise.
(new_muto1): Ditto.
* dcrt0.cc (do_exit): Call muto::set_exiting_thread here.
* sync.cc (muto_start): Eliminate.
(muto::acquire): Always give exiting thread a lock. Never give thread a lock
if exiting.
(muto::release): Ditto for releasing.
* dtable.cc (dtable::init_lock): Unline function and define here.
* dtable.h (lock_cs): Define as a muto since critical sections seem to work
oddly on Windows Me.
(lock): Accommodate switch to muto.
(unlock): Ditto.
* exceptions.cc (setup_handler): Don't worry about acquiring mutos since that
hasn't mattered for a long time.
(signal_exit): Ditto: muto stuff will be handled automatically on exit now.
* Makefile.in (DLL_IMPORTS): Link advapi32 to ensure proper DLL initialization.
* autoload.cc (RegCloseKey): Arbitrarily choose this function as a "seed" to
pull the advapi32 link library in. So, comment out the autoloading.
* cygtls.cc (_threadinfo::init_thread): Just clear CYGTLS_PADSIZE.
(_threadinfo::remove): Add debugging.
(_threadinfo::find_tls): Ditto.
* cygtls.h (_threadinfo::padding): Make zero length (for now?).
* dcrt0.cc (dll_crt0_0): Move more initialization here from dll_crt0_1.
(dll_crt0_1): See above.
* dtable.h (dtable::lock): Remove commented out critical section locking.
* dtable.h (dtable::init_lock): Remove commented out critical section locking.
* dtable.h (dtable::unlock): Remove commented out critical section locking.
* exceptions.cc (interruptible): bool'ize.
* init.cc (threadfunc_fe): Revert to storing threadfunc at stack bottom.
(munge_threadfunc): Ditto. Avoid adding overhead to calibration_thread.
(prime_threads): Don't initialize tls stuff.
(dll_entry): Make minor change to initialization order.
* tlsoffsets.h: Regenerate.
* sigproc.cc (wait_sig): Add sanity check for end of process thread exit.
* select.h: Make minor formatting change.
* Makefile.in: Add still more -fomit-frame-pointer functions.
* dtable.h (dtable::lock): New function.
(dtable::unlock): New function.
(dtable::init_lock): New function.
* cygheap.h (HEAP_TLS): Declare new enum value.
(init_cygheap::threadlist): Declare new array.
(init_cygheap::sthreads): Declare new variable.
(cygheap_fdmanip::~cygheap_fdmanip): Use new dtable lock/unlock functions.
(cygheap_fdnew::cygheap_fdnew): Ditto.
(cygheap_fdget::cygheap_fdget): Ditto.
* dtable.cc (dtable_init): Initialize fdtab critical section.
(dtable::fixup_after_fork): Ditto.
(dtable::fixup_after_exec): Ditto.
(dtable::dup2): Use lock/unlock calls to protect access to fdtab.
(dtable::find_fifo): Ditto.
(dtable::fixup_before_fork): Ditto.
(dtable::fixup_before_exec): Ditto.
(dtable::set_file_pointers_for_exec): Ditto.
(dtable::vfork_child_dup): Ditto.
(dtable::vfork_parent_restore): Ditto.
* syscalls.cc (close_all_files): Ditto.
* sync.h (muto::acquired): Declare new function.
(new_muto1): Declare new macro used to specify name of muto storage.
* sync.cc (muto::acquired): Define new function.
* cygthread.cc (cygthread::stub): Remove signal chain removal call since it is
handled during initialization now.
* cygthread.cc (cygthread::simplestub): Remove signal chain removal call since
it is handled during initialization now.
* cygtls.cc (sentry): New class used for locking. Use throughout.
(_threadinfo::reset_exception): Don't pop stack.
(_threadinfo::find_tls): Move from exceptions.cc.
(_threadinfo::init_thread): Initialize array of threads rather than linked
list. Take second argument indicating thread function for this thread.
(_threadinfo::remove): Search thread array rather than linked list. Use sentry
to lock. Only unlock if we got the lock.
(_threadinfo::find_tls): Ditto for first two.
(handle_threadlist_exception): Handle exceptions when manipulating the thread
list in case of premature thread termination.
(_threadinfo::init_threadlist_exceptions): Ditto.
* cygtls.h (TLS_STACK_SIZE): Decrease size.
(_threadinfo::padding): Add element to avoid overwriting lower part of stack.
(_threadinfo::remove): Add a "wait" argument to control how long we wait for a
lock before removing.
* exceptions.cc (init_exception_handler): Make global. Take argument to
control exception handler being set.
(ctrl_c_handler): Wait forever when removing self from signal chain.
(_threadinfo::find_tls): Move to cygtls.cc.
(sig_handle): Reorganize detection for thread-specific signals.
* heap.cc (heap_init): Rework slightly. Make fatal error more verbose. Remove
malloc initialization since it can't happen during dll attach.
* init.cc (search_for): Move address to search for on stack here.
(threadfunc_ix): Ditto for stack offset. Make shared so that stack walk
potentially only has to be done once when cygwin processes are running.
(threadfunc_fe): Use standard tls to store thread function (may change back
later).
(calibration_thread): New function. Potentially called to find threadfunc_ix.
(munge_threadfunc): Search for "search_for" value on stack. Output warning
when thread func not found on stack. Use standard tls to store thread
function.
(prime_threads): New function. Called to prime thread front end.
(dll_entry): Call dll_crt0_0 here when DLL_PROCESS_ATTACH. Call prime_threads
here. Try to remove thread from signal list here.
* sigproc.cc (wait_sig): Initialize threadlist exception stuff here.
* thread.cc (pthread::exit): Pass argument to signal list remove function.
* thread.h: Remove obsolete *ResourceLock defines.
* tlsoffsets.h: Regenerate.
* winsup.h (spf): Define temporary debug macro to be deleted later.
* dcrt0.cc (dll_crt0_0): New function, called during DLL initialization.
Mainly consists of code pulled from dll_crt0_1.
(dll_crt0_1): See above.
(_dll_crt0): Wait for initial calibration thread to complete, if appropriate.
Move some stuff to dll_crt0_0.
(initialize_main_tls): Accommodate argument change to
_thread_info::init_thread.
* fork.cc (fork_child): Ditto.
(sync_with_child): Fix debug message.
* external.cc (cygwin_internal): Remove special considerations for
uninitialized dll since initialization happens during dll attach now.
* dlfcn.cc (dlopen): Remove obsolete *ResourceLock calls.
(dlclose): Ditto.
* cygheap.h (init_cygheap::close_ctty): Declare new function.
* cygheap.cc (init_cygheap::close_ctty): Define new function.
* syscalls.cc (close_all_files): Use close_ctty.
(setsid): Ditto.
* cygthread.cc (cygthread::stub): Remove exception initialization.
* cygthread.cc (cygthread::stub): Remove exception initialization.
(cygthread::simplestub): Ditto.
* thread.cc (pthread::thread_init_wrapper): Ditto.
* cygtls.cc (_last_thread): Make static.
(_threadinfo::call2): Initialize exception handler here.
(_threadinfo::find_tls): Move here.
* exceptions.cc (_threadinfo::find_tls): Move.
* dcrt0.cc (__api_fatal): Add prefix info to message here rather than including
it in every call to function.
* winsup.h (api_fatal): Accommodate above change.
* debug.cc (add_handle): Don't do anything if cygheap not around.
(mark_closed): Ditto.
* dll_init.cc (dll_list::detach): Fix debug output.
* fork.cc (sync_with_child): Ditto.
(vfork): Improve debug output.
* heap.cc (heap_init): Ditto.
* exceptions.cc (try_to_debug): Clarify message when debugger attaches.
(init_cheap::ctty): Change to pointer.
* dtable.h (dtable::find_archetype): Declare new function.
(dtable::add_archetype): Declare new function.
(dtable::delete_archetype): Declare new function.
(dtable::narchetypes): Declare.
(dtable::farchetypes): Declare.
(dtable::initial_archetype_size): Declare.
(dtable::dtable): Initialize new fields.
(dtable::initial_archetype_size): Declare.
* dtable.cc (dtable::find_archetype): Define new function.
(dtable::add_archetype): Define new function.
(dtable::delete_archetype): Define new function.
(dtable::initial_archetype_size): Define.
* fhandler.h (fhandler_base::archetype): Declare.
(fhandler_base::usecount): Declare.
* fhandler.cc (fhandler_base::fhandler_base): Initialize new fields.
* fhandler_console.cc (fhandler_console::get_tty_stuff): Pass NULL to third
argument of set_ctty.
* fhandler_tty.cc (fhandler_tty_slave::open): Accommodate new archetype method
to create only one instance of a tty.
(fhandler_tty_slave::close): Don't close handles unless archetype usecount is
zero. When that happens, close archetype too.
(fhandler_tty_slave::dup): Just copy archetype. Set use count appropriately.
Set ctty, if appropriate.
(fhandler_tty_common::dup): Remove slave considerations.
(fhandler_tty_common::set_close_on_exec): Remove cygheap->ctty considerations.
* pinfo.cc (_pinfo::set_ctty): Accommodate new archetype methods.
* pinfo.h (_pinfo::set_ctty): Make third argument explicit.
* syscalls.cc (close_all_files): Decrement controlling tty use count before
closing all handles to allow controlling tty to be closed. Remove previous
controlling tty considerations.
throughout.
* tty.cc (tty::common_init): Remove call to SetKernelObjectSecurity and edit
some comments.
* cygheap.h (init_cygheap::ctty): Add new element.
* devices.in (device::parse): Remove special handling for /dev/tty.
* devices.cc: Regenerate.
* dtable.cc (build_fh_pc): Don't reset /dev/tty device. Let the device opener
do that.
* fhandler_termios.cc (tty_min::set_ctty): Redefine to _pinfo class.
* fhandler_tty.cc (fhandler_tty_common::set_close_on_exec): Avoid setting
noninherit flag for ctty.
* tty.h: Move BOOLs to bools.
(tty_min::set_ctty): Redeclare to _pinfo class.
* pinfo.cc (_pinfo::set_ctty): Define new function based on tty_min::set_ctty.
Change first argument from tty number to tty_min class.
* pinfo.h (_pinfo::set_ctty): Declare.
* fhandler_console.cc (fhandler_console::get_tty_stuff): Reflect move of
set_ctty to _pinfo class.
* fhandler_tty.cc (fhandler_tty_slave::open): Treat FH_TTY specially. Use
saved cygheap value if it exists. Otherwise convert to real device and save on
first time open.
(fhandler_tty_common::dup): Potentially set controlling tty if duping a slave
tty.
* syscalls.cc (setsid): Close controlling tty in cygheap.
* tty.cc: Change some BOOLs to bools.
* devices.gperf: New file.
* devices.shilka: New file.
* cygwin-gperf: New file.
* cygwin-shilka: New file.
* fhandler_fifo.cc: New file.
* fhandler_nodevice.cc : New file. Reorganize headers so that path.h precedes
fhandler.h throughout. Remove device argument and unit arguments from fhandler
constructors throughout. Remove pc arguments to fhandler functions and use
internal pc element instead, throughout. Use dev element in pc throughout.
Use major/minor elements rather than units and device numbers previously in
fhandler class. Use correct methods for fhandler file names rather than
directly accessing file name variables, throughout.
* Makefile.in (DLL_OFILES): Add devices.o, fhandler_fifo.o
* dcrt0.cc (dll_crt0_1): Call device::init.
* devices.h: Renumber devices based on more Linux-like major/minor numbers.
Add more devices. Declare standard device storage.
(device): Declare struct.
* dir.cc (opendir): Use new 'build_fh_name' to construct a fhandler_* type.
* dtable.cc (dtable::get_debugger_info): Ditto.
(cygwin_attach_handle_to_fd): Ditto.
(dtable::release): Remove special FH_SOCKET case in favor of generic
"need_fixup_before" test.
(dtable::init_std_file_from_handle): Use either build_fh_dev or build_fh_name
to build standard fhandler.
(dtable::build_fh_name): Renamed from dtable::build_fhandler_from_name. Move
out of dtable class. Don't accept a path_conv argument. Just build it here
and pass it to:
(build_fh_pc): Renamed from dtable::build_fhandler. Move out of dtable class.
Use intrinsic device type in path_conv to create new fhandler.
(build_fh_dev): Renamed from dtable::build_fhandler. Move out of dtable class.
Simplify arguments to just take new 'device' type and a name. Just return
pointer to fhandler rather than trying to insert into dtable.
(dtable::dup_worker): Accommodate above build_fh name changes.
(dtable::find_fifo): New (currently broken) function.
(handle_to_fn): Use strechr for efficiency.
* dtable.h: Reflect above build_fh name changes and argument differences.
(fhandler_base *&operator []): Return self rather than copy of self.
* fhandler.cc (fhandler_base::operator =): Use pc element to set normalized
path.
(fhandler_base::set_name): Ditto.
(fhandler_base::raw_read): Use method to access name.
(fhandler_base::write): Correctly use get_output_handle rather than get_handle.
(handler_base::device_access_denied): New function.
(fhandler_base::open): Eliminate pc argument and use pc element of
fhandler_base throughout.
(fhandler_base::fstat): Detect if device is based in filesystem and use
fstat_fs to calculate stat, if so.
(fhandler_base::fhandler_base): Eliminate handling of file names and, instead,
just free appropriate component from pc.
(fhandler_base::opendir): Remove path_conv parameter.
* fhandler.h: Remove all device flags.
(fhandler_base::pc): New element.
(fhandler_base::set_name): Change argument to path_conv.
(fhandler_base::error): New function.
(fhandler_base::exists): New function.
(fhandler_base::pc_binmode): New function.
(fhandler_base::dev): New function.
(fhandler_base::open_fs): New function.
(fhandler_base::fstat_fs): New function.
(fhandler_base::fstat_by_name): New function.
(fhandler_base::fstat_by_handle): New function.
(fhandler_base::isfifo): New function.
(fhandler_base::is_slow): New function.
(fhandler_base::is_auto_device): New function.
(fhandler_base::is_fs_special): New function.
(fhandler_base::device_access_denied): New function.
(fhandler_base::operator DWORD&): New operator.
(fhandler_base::get_name): Return normalized path from pc.
(fhandler_base::get_win32_name): Return windows path from pc.
(fhandler_base::isdevice): Renamed from is_device.
(fhandler_base::get_native_name): Return device format.
(fhandler_fifo): New class.
(fhandler_nodevice): New class.
(select_stuff::device_specific): Remove array.
(select_stuff::device_specific_pipe): New class element.
(select_stuff::device_specific_socket): New class element.
(select_stuff::device_specific_serial): New class element.
(select_stuff::select_stuff): Initialize new elements.
* fhandler_disk_file.cc (fhandler_base::fstat_by_handle): Move to base class
from fhandler_disk_file.
(fhandler_base::fstat_by_name): Ditto.
(fhandler_base::fstat_by_name): Ditto.
(fhandler_disk_file::open): Move most functionality into
fhandler_base::open_fs.
(fhandler_base::open_fs): New function.
(fhandler_disk_file::close): Move most functionality into
fhandler_base::close_fs.
(fhandler_base::close_fs): New function.
* fhandler_mem.cc (fhandler_dev_mem::open): Use device name in debugging
output.
* fhandler_socket.cc (fhandler_socket::set_connect_secret): Copy standard
urandom device into appropriate place.
(fhandler_socket::accept): Reflect change in fdsock return value.
* fhandler_tty.cc: See "throughouts" above.
* net.cc: Accommodate fdsock change throughout.
(fdsock): Return success or failure, accept fd argument and device argument.
* path.cc (symlink_info::major): New element.
(symlink_info::minor): New element.
(symlink_info::parse_device): Declare new function.
(fs_info::update): Accommodate changes in path_conv class.
(path_conv::fillin): Ditto.
(path_conv::return_and_clear_normalized_path): Eliminate.
(path_conv::set_normalized_path): New function.
(path_conv::path_conv): Set info in dev element. Use path_conv methods Check
for FH_FS rather than FH_BAD to indicate when to fill in filesystem stuff.
where appropriate rather than direct access. Use set_normalized_path to set
normalized path.
(windows_device_names): Eliminate.
(get_dev): Ditto.
(get_raw_device_number): Ditto.
(get_device_number): Ditto.
(win32_device_name): Call new device name parser to do most of the heavy
lifting.
(mount_info::conv_to_win32_path): Fill in dev field as appropriate.
(symlink_worker): Handle new device files.
(symlink_info::check): Ditto.
(symlink_info::parse_device): Define new function.
* path.h (executable_states): Move here from fhandler.h.
(fs_info): Rename variables to *_storage and create methods for accessing same.
(path_conv): Add dev element, remove devn and unit and adjust inline methods to
accommodate.
(set_normalized_path): Declare new function.
* pinfo.cc (_pinfo::commune_recv): Add broken support for handling fifos.
(_pinfo::commune_send): Ditto.
* pipe.cc (fhandler_pipe::close): check for existence of handle before closing
it.
(handler_pipe::create): Rename from make_pipe. Change arguments to accept
fhandler_pipe array. Accommodate fifos.
(pipe): Rework to deal with fhandler_pipe::create changes.
(_pipe): Ditto.
* select.cc: Use individual device_specific types throughout rather than
indexing with obsolete device number.
(set_bits): Use is_socket call rather than checking device number.
* shared_info.h (CURR_MOUNT_MAGIC): Update.
(conv_to_win32_path): Reflect addition of device argument.
* syscalls.cc (mknod_worker): New function.
(open): Use build_fh_name to build fhandler.
(chown_worker): Detect if this is an 'auto' device rather than an on-filesystem
device and handle appropriately.
(chmod_device): New function.
(chmod): Detect if this is an 'auto' device rather than an on-filesystem device
and handle appropriately. Use chmod_device to set mode of in-filesystem
devices.
(stat_worker): Eliminate path_conv argument. Call build_fh_name to construct
fhandler. Use fh->error() rather than pc->error to detect errors in fhandler
construction.
(access_worker): New function pulled from access. Accommodate in-filesystem
devices.
(access): Use access_worker.
(fpathconf): Detect if this is an 'auto' device rather than an on-filesystem
device and handle appropriately.
(mknod_worker): New function.
(mknod32): New function.
(chroot): Free normalized path -- assuming it was actually cmalloced.
* tty.cc (create_tty_master): Tweak for new device class.
(tty::common_init): Ditto.
* winsup.h (stat_worker): Remove.
(symlink_worker): Declare.
* exceptions.cc (set_process_mask): Just call sig_dispatch_pending and don't
worry about pending_signals since sig_dispatch_pending should always do the
right thing now.
(sig_handle): Reorganize SIGCONT handling to more closely conform to SUSv3.
* pinfo.h: Move __SIG enum to sigproc.h.
(PICOM_FIFO): New enum element.
(_pinfo): Remove 'thread2signal' stuff throughout class.
(_pinfo::commune_send): Make varargs.
(_pinfo::sigtodo): Eliminate.
(_pinfo::thread2signal): Ditto.
* signal.cc (kill_worker): Eliminate call to setthread2signal.
* sigproc.cc (local_sigtodo): Eliminate.
(getlocal_sigtodo): Ditto.
(sigelem): New class.
(pending_signals): New class.
(sigqueue): New variable, start of sigqueue linked list.
(sigcatch_nonmain): Eliminate.
(sigcatch_main): Eliminate.
(sigcatch_nosync): Eliminate.
(sigcomplete_nonmain): Eliminate.
(pending_signals): Eliminate.
(sig_clear): Call signal thread to clear pending signals, unless already in
signal thread.
(sigpending): Call signal thread to get pending signals.
(sig_dispatch_pending): Eliminate use of pending_signals and just check
sigqueue.
(sigproc_terminate): Eliminate all of the obsolete semaphore stuff. Close
signal pipe handle.
(sig_send): Eliminate all of the obsolete semaphore stuff and use pipe to send
signals.
(getevent): Eliminate.
(pending_signals::add): New function.
(pending_signals::del): New function.
(pending_signals::next): New function.
(wait_sig): Eliminate all of the obsolete semaphore stuff. Use pipe to
communicate and maintain a linked list of signals.
* sigproc.h: Move __SIG defines here. Add __SIGPENDING.
(sig_dispatch_pending): Remove "C" specifier.
(sig_handle): Accept a mask argument.
* thread.cc: Remove signal handling considerations throughout.
needed.
* dtable.cc (dtable::vfork_parent_restore): Remove assertion.
* pipe.cc (fhandler_pipe::close): Don't close read_state during fork_fixup
since it wasn't inherited.
* dtable.h (dtable::set_file_pointers_for_exec): Declare new function.
* spawn.cc (spawn_guts): Call dtable::set_file_pointers_for_exec to set
pointers to EOF when execing non-cygwin applications.
(child_info_fork::heaptop): Remove obsolete element.
(child_info_fork::heabbase): Ditto.
(child_info_fork::heapptr): Ditto.
(child_info_fork::mount_table): New element.
(child_info_fork::myself_addr): Ditto.
* dcrt0.cc (dll_crt0_1): Set mount_table and myself_addr when forking.
(initial_env): Add newline to "sleeping" message.
* dll_init.cc (reserve_upto): Accommodate cygwin heap when freeing memory.
Make debugging output a little more descriptive.
* fork.cc (fork_parent): Save mount_table and myself_addr.
* pinfo.cc (myself_addr): New variable.
(set_myself): Pass PID_MYSELF flag to init.
(pinfo::Init): Honor PID_MYSELF. Save address where myself shared memory
resides in myself_addr, for fork.
* pinfo.h (myself_addr): Declare.
* shared.cc (memory_init): On fork, use previously saved address for location
of mount table.
* include/sys/cygwin.h (PID_MYSELF): New value.
* dtable.cc (dtable::stdio_init): Don't pass access type to
init_std_file_from_handle. It's always the same.
(dtable::init_std_file_from_handle): Remove access type argument. Assume
read/write.
* dtable.h (dtable::init_std_file_from_handle): Ditto for declaration.
* exceptions.cc (try_to_debug): Don't try to debug if already being debugged.
* fhandler_console.cc (shared_console_info_save): New variable.
(fhandler_console::get_tty_stuff): Save address of shared console stuff for
fork.
muto. Use this argument to construct static storage.
* cygheap.cc (cygheap_init): Reflect above change.
* exceptions.cc (events_init): Ditto.
* malloc.cc (malloc_init): Ditto.
* path.cc (cwdstuff::init): Ditto.
* cygheap.h (cwdstuff): Change name of lock element to make it less generic.
* path.cc (cwdstuff::get_hash): Ditto.
(cwdstuff::get_initial): Ditto.
(cwdstuff::set): Ditto.
(cwdstuff::get): Ditto.
* sigproc.cc (proc_subproc): Ditto.
* debug.cc (lock_debug): Change to method. Use method rather than macro
throughout.
* tty.h (tty_min::kill_pgrp): Declare new method.
* fhandler_termios.cc (tty_min::kill_pgrp): New method.
(fhandler_termios::line_edit): Use new method for killing process.
* dcrt0.cc (do_exit): Ditto.
* dtable.cc (dtable::get_debugger_info): New method for inheriting dtable info
from a debugger.
* tty.cc (tty_init): Attempt to grab file handle info from parent debugger, if
appropriate. # dtable.cc (dtable::stdio_init): Make this a method.
(dtable::init_std_file_from_handle): Don't set fd unless it's not open.
(dtable::build_fhandler_from_name): Move name setting to
dtable::build_fhandler.
(dtable::build_fhandler): Add win32 name parameter.
* dcrt0.cc (dll_crt0_1): Change to use dtable stdio_init.
* dtable.h (dtable): Reflect build_fhandler parameter change.
* mmap.cc (mmap_record::alloc_fh): Don't set name parameter in build_fhandler.
* net.cc (fdsock): Remove set_name call since it is now handled by
build_fhandler.
* sigproc.cc (proc_subproc): Release muto as early as possible.
Christopher Faylor
Corinna Vinschen
Eric Blake