5eb4a1666d
or1k: set heap start for optimsoc-gzll
...
- With the gzll kernel we have two different loading options:
- If the image is loaded to the global memory, the bootstrapping
loads the kernel to local memory. Applications are loaded on
demand. The heap then starts right after bss.
- If the image is pre-loaded to the local memory it includes the
application binaries right after bss. The heap then starts after
the application objects.
- We can check if this is a gzll kernel as it has the string "gzll" at
0x2000. At 0x200c we then find the end of the application objects in
the image. If there is no global memory we set _or1k_heap_start to
this value.
* or1k/boards/optimsoc.S: Heap for gzll kernel
2015-05-27 13:30:20 +02:00
58efeedd16
or1k: Make heap start configurable
...
- Previously the heap started right after the bss section. This can now
be configured by changing the _or1k_heap_start symbol that defaults to
the old value (&end). In board_init_early, we can now set this to
another value.
* or1k/sbrk.c: Allow for different heap start
2015-05-27 13:30:20 +02:00
aa26b78462
or1k: UART also accept timeout interrupt
...
- The UART interrupt only handled receiver FIFO full interrupts, but we
also want to handle timeout interrupts.
* or1k/or1k_uart.c: Fix interrupts
2015-05-27 13:30:20 +02:00
58e5719a0e
Bug fix in timer for or1k
...
- Properly set the interrupt pending flag in the timer mode register.
* or1k/timer.c: Properly set interrupt flags
2015-05-27 13:30:20 +02:00
b46d3b5536
Store entire context for or1k
...
- Store the exception program counter (from EPCR) and exception status
register (from ESR) also during the exception. A runtime system may
replace them thereby to implement a thread switch.
* or1k/exception-asm.S: Store missing state
2015-05-27 13:30:20 +02:00
a6342974b0
Fix exception stack frame for or1k
...
- We do not need a red zone here, as we do not operate on the current
stack, but always use the clear exception stack. Also reserve two
extra words for the context to store EPCR and ESR.
* or1k/crt0.S: Fix exception stack frame
* or1k/exception-asm.S: ditto
2015-05-27 13:30:19 +02:00
132030fcf2
Fix interrupt handling for or1k.
...
- During interrupt handling the PICSR, table pointers and current
interrupt line have been saved in incorrect registers and/or stored on
the stack.
- Save the pointer in r16/r18, PICSR in r20 and the current interrupt
line in r22. Those are callee-saved registers, so that the register
values will be preserved.
* or1k/interruts-asm.S: Change registers to callee-saved.
2015-05-27 13:30:19 +02:00
324bd11706
Add a check that the data area does not overrun the stack.
...
* msp430/msp430-sim.ld (.stack): Add an assertion to make sure
that the data area does not overrun the stack. PROVIDE a new
symbol __stack_size to allow the user to set the limit.
* msp430/msp430xl-sim.ld (.stack): Likewise.
* rl78/rl78-sim.ld (.stack): Likewise.
* rl78/rl78.ld (.stack): Likewise.
* rx/rx-sim.ld (.stack): Likewise.
* rx/rx.ld (.stack): Likewise.
2015-05-27 13:30:19 +02:00
baa681fd38
Adds support for placing MSP430 code and data into either low memory or high memory.
...
* msp430/msp430.ld: Delete.
* msp430/msp430F5438A-l.ld: Delete.
* msp430/msp430F5438A-s.ld: Delete.
* msp430/crt_movedata.S: Delete.
* msp430/Makefile.in (SCRIPTS): Remove msp430.ld.
(CRT_OBJS): Add crt_move_highdata.o.
* msp430/memmodel.h (START_CRT_FUNC): New macro.
(END_CRT_FUNC): New macro.
(WEAK_DEF): New macro.
* msp430/crt0.S: Use new macros.
(move_highdata): New code to initialise the .data section if it is
held in high memory.
* msp430/msp430-sim.ld (.data): Add .either.data.
(.rodata2): Move some read-only data sections here.
(.text): Add .either.text.
(.rodata): Add .either.rodata.
(.bss): Add .either.bss.
* msp430/msp430xl-sim.ld (MEMORY): Add HIROM.
(.rodata2): Move some read-only data sections here.
(.upper.data): New section. Include notes about how to initialise
it.
2015-05-27 13:30:19 +02:00
e6101f3008
libgloss: mcore: add custom syscall header
...
The mcore simulator has a unique set of syscall numbers. Add a header
that matches reality since the common one doesn't.
2015-04-23 22:03:45 +02:00
6803327326
libgloss: arm: fix copy & paste in syscall.h
...
This header was clearly copied from the common syscall.h and customized,
but the header comment is no longer accurate -- this isn't the general
file anymore.
2015-04-23 22:03:45 +02:00
cd0d459135
For the RX port, avoid using string instructions when __RX_DISALLOW_STRING_INSNS__ is defined.
...
* rx/crt0.S (_start): If string instructions are not allowed,
avoid using SMOVF.
* libc/machine/rx/memchr.S: Add non-string insn using version.
* libc/machine/rx/memcpy.S: Likewise.
* libc/machine/rx/memmove.S: Likewise.
* libc/machine/rx/mempcpy.S: Likewise.
* libc/machine/rx/strcat.S: Likewise.
* libc/machine/rx/strcmp.S: Likewise.
* libc/machine/rx/strcpy.S: Likewise.
* libc/machine/rx/strlen.S: Likewise.
* libc/machine/rx/strncat.S: Likewise.
* libc/machine/rx/strncmp.S: Likewise.
* libc/machine/rx/strncpy.S: Likewise.
2015-04-23 21:57:13 +02:00
45d0b17928
Add .note and DWARF3 sections to RX linker scripts.
...
* rx/rx.ld: Add .note and DWARF3 sections.
* rx/rx-sim.ld: Likewise.
2015-04-23 21:57:13 +02:00
61a2d9dedb
Always include the .csstart section in RL78 executables.
...
* rl78/rl78.ld (.csstart): Add a KEEP directive.
* rl78/rl78-sim.ld (.csstart): Add a KEEP directive.
2015-04-23 21:57:12 +02:00
e185d3febe
* v850/sim.ld: Add a .note.renesas section.
2015-03-05 11:26:59 +00:00
8d98f956cc
* arm/crt0.S: Initialise __heap_limit when ARM_RDI_MONITOR is defined.
...
* arm/syscalls.c: define __heap_limit global symbol.
* arm/syscalls.c (_sbrk): Honour __heap_limit.
2015-02-17 09:30:52 +00:00
19e714bcee
* or1k/or1k_uart.c: Write bugfix and cleanup/documentation.
...
* or1k/or1k_uart.h: Cleanup.
2015-02-11 13:33:40 +00:00
5ae2368e92
* sparc/crt0.S: Declare use of system registers.
...
* sparc/cygmon-crt0.S: Ditto.
* sparc/erc32-crt0.S: Ditto.
* sparc/traps.S: Ditto.
2015-01-22 17:38:39 +00:00
bf8f43ae8a
* COPYING.LIBGLOSS: Add Controls and Data Services copyright.
...
* COPYING.NEWLIB: Likewise.
libgloss/
* configure.in: Add Visium support.
* configure: Regenerate.
* visium/: New directory.
newlib/
* configure.host: Add Visium support.
* libc/machine/configure.in: Likewise.
* libc/machine/configure: Regenerate.
* libc/machine/visium/: New directory.
* libc/include/machine/setjmp.h (_JBLEN): Define for Visium.
* libc/include/machine/ieeefp.h (__IEEE_BIG_ENDIAN): Likewise.
* libc/include/machine/time.h (_CLOCKS_PER_SEC_): Likewise.
2015-01-21 18:27:47 +00:00
a098aad30b
* rl78/crt0.S: Initialize .saddr. Avoid using SEL.
...
* rl78/rl78-sim.ld: Add .saddr/.frodata section.
* rl78/rl78.ld: Likewise.
* rl78/rl78-sim.ld: Make room for virtual register banks.
* rl78/rl78.ld: Likewise.
* rl78/vregs.h: New.
* rl78-sys.h: Use it.
* rl78/swrite.S: New.
* rl78/Makefile.in: Build it.
* rl78/write.c: Use it.
2015-01-20 18:43:36 +00:00
70e52cba1b
* rl78/crt0.S: Initialize .saddr. Avoid using SEL.
...
* rl78/rl78-sim.ld: Add .saddr/.frodata section.
* rl78/rl78.ld: Likewise.
* rl78/rl78-sim.ld: Make room for virtual register banks.
* rl78/rl78.ld: Likewise.
* rl78/vregs.h: New.
* rl78-sys.h: Use it.
* rl78/swrite.S: New.
* rl78/Makefile.in: Build it.
* rl78/write.c: Use it.
2015-01-16 22:21:34 +00:00
f91272b8c2
* or1k/include/or1k-sprs.h: New auto-generated header file.
2015-01-14 09:56:02 +00:00
ba913653a6
2015-01-05 Yaakov Selkowitz <yselkowitz@users.sourceforge.net>
...
* lm32/Makefile.in (install): Respect DESTDIR.
(install-scripts): Ditto.
* mep/Makefile.in (install): Ditto.
* mt/Makefile.in (install): Ditto.
* rl78/Makefile.in (install): Ditto.
2015-01-05 17:36:34 +00:00
47c98af2ba
The moxie sub.l instruction is now just sub.
2014-12-27 12:18:56 +00:00
ab42ec30e6
2014-12-15 Stefan Wallentowitz <stefan.wallentowitz@tum.de>
...
* or1k/Makefile.in: Build and install board libraries
* or1k/board.h: New file
* or1k/boards/README: New file
* or1k/boards/atlys.S: New file
* or1k/boards/de0_nano.S: New file
* or1k/boards/ml501.S: New file
* or1k/boards/ml509.S: New file
* or1k/boards/optimsoc.S: New file
* or1k/boards/or1ksim-uart.S: New file
* or1k/boards/or1ksim.S: New file
* or1k/boards/ordb1a3pe1500.S: New file
* or1k/boards/ordb2a.S: New file
* or1k/boards/orpsocrefdesign.S: New file
* or1k/boards/tmpl.S: New file
* or1k/boards/tmpl.c: New file
2014-12-15 20:22:28 +00:00
68a9101237
2014-12-15 Stefan Wallentowitz <stefan.wallentowitz@tum.de>
...
* or1k/Makefile.in: Add libor1k
* or1k/README: New file
* or1k/caches-asm.S: New file
* or1k/exceptions-asm.S: New file
* or1k/exceptions.c: New file
* or1k/impure.c: New file
* or1k/include/or1k-nop.h: New file
* or1k/include/or1k-support.h: New file
* or1k/interrupts-asm.S: New file
* or1k/interrupts.c: New file
* or1k/mmu-asm.S: New file
* or1k/or1k-internals.h: New file
* or1k/or1k_uart.c: New file
* or1k/or1k_uart.h: New file
* or1k/outbyte.S: New file
* or1k/sbrk.c: New file
* or1k/sync-asm.S: New file
* or1k/syscalls.c: New file
* or1k/timer.c: New file
* or1k/util.c: New file
2014-12-15 20:17:39 +00:00
d1219c0e89
2014-12-15 Stefan Wallentowitz <stefan.wallentowitz@tum.de>
...
* README: Add details about or1k.
* configure.in: Add or1k/or1knd
* configure: Regenerated.
* or1k/aclocal.m4: New file.
* or1k/configure: Ditto.
* or1k/Makefile.in: New file
* or1k/configure.in: New file
* or1k/crt0.S: New file
* or1k/include/or1k-asm.h: New file
2014-12-15 20:09:28 +00:00
d4ef8a6368
* libgloss/nds32/_exit.S: Finish with an infinite loop in _exit.
...
* libgloss/nds32/_getpid.S: Don't issue _getpid system call, it is
always successful.
* libgloss/nds32/_gettimeofday.S: No error for _gettimeofday is defined
in SYS_geterr handler.
* libgloss/nds32/_isatty.S: No error for _isatty is defined in
SYS_geterr handler.
* libgloss/nds32/_kill.S: Alway fail. errno = EINVAL.
* libgloss/nds32/_link.S: Alway fail. errno = EMLINK.
* libgloss/nds32/_times.S: Alway fail. errno = EACCES.
* libgloss/nds32/_unlink.S: fix copy and paste error.
* libgloss/nds32/crt0.S: Add pre_c_init, post_c_init, arg_init.
* libgloss/nds32/crt1.S: Add pre_c_init, post_c_init, arg_init.
* libgloss/nds32/syscall_extra.h: Re-format.
* libgloss/nds32/vh.h: Add more virtual hosting number.
2014-12-15 13:30:07 +00:00
070d1cee7d
Rebuilt moxie/configure
2014-12-11 11:54:44 +00:00
b3281dd194
* mips/crt0.S: Configure processor based on .MIPS.abiflags.
...
Remove FPU availability check, just use the pre-processor flags
to indicicate what the user wanted.
* mips/abiflags.S: New file.
* mips/regs.S (SR_MSA): Define macro.
* mips/mti32.ld: Place .MIPS.abiflags and wrap in marker symbols.
* mips/mti64.ld: Likewise.
* mips/mti64_64.ld: Likewise.
* mips/mti64_n32.ld: Likewise.
2014-11-28 08:51:03 +00:00
84b2a020da
2014-11-26 Matthew Fortune <Matthew.Fortune@imgtec.com>
...
* mips/crt0.S: Remove .set noreorder throughout.
(zerobss): Open code the bltu macro instruction so that the
zero-loop does not have a NOP in the branch delay slot.
2014-11-27 00:28:09 +00:00
b7d6a7c805
* msp430/Makefile.in (CRT_OBJS): Add crt_high_bss.o.
...
* msp430/crt0.S (high_bss): Add.
* msp430/msp430-sim.ld: Add error message if .upper sections are
detected.
* msp430/msp430xl-sim.ld (MEMORY): Adjust to better mimic real
life MCUs. Add support for upper and lower sections.
2014-11-13 10:18:57 +00:00
787fa74125
2014-10-22 Tim Harder <radhermit@gmail.com>
...
* msp430/Makefile.in: respect DESTDIR during install
2014-10-23 01:49:49 +00:00
c30356443e
* configure.in: Remove config_libnosys=false
...
* configure: Regenerated.
* msp430/nosyscalls.S: Rename to ciosyscalls.S
* msp430/Makefile.in: Change LIBNOSYS to LIB_CIO.
2014-09-22 15:26:46 +00:00
1b580c732a
Add missing file from last patch
2014-08-15 10:52:38 +00:00
433de33ec2
* arm/elf-nano.specs: New file.
...
* arm/elf-rdimon.specs: Support nano.specs.
* arm/Makefile.in: Support nano.specs.
* libnosys/nosys.specs: Support nano.specs.
2014-08-14 15:00:33 +00:00
ca6a65aa64
Fix typo in previous commit
2014-07-28 05:23:30 +00:00
0a0f33e501
Add moxiebox support.
2014-07-27 14:37:10 +00:00
844557c9ed
* arm/elf-aprofile-validation.specs (*link): Make text segment
...
64k-aligned.
* arm/elf-aprofile-ve.specs (*link): Likewise.
2014-07-16 11:53:34 +00:00
179e25f0df
* msp430/Makefile.in (NOSYS_OBJS): Add unlink.o.
...
(SCRIPTS): Remove msp430F5438A-s.ld and msp430F5438A-s.ld.
* unlink.c: New file.
2014-04-30 11:30:14 +00:00
d83d5c7d7b
2014-04-04 Ashish Kapania <akapania@ti.com>
...
* arm/configure.in: (*-*-tirtos*) Accept TIRTOS target when setting
objtype
* arm/configure: Regenerated.
2014-04-04 21:43:55 +00:00
e669b401f7
2014-03-21 Sabrini Ni <sabrinanitw@gmail.com>
...
* nds32/_sbrk.S: Add .size and .type directive.
2014-03-21 21:17:43 +00:00
c94fff60f1
2014-03-21 Sabrini Ni <sabrinanitw@gmail.com>
...
* nds32/crt0.S: Tweak initialization sqeuence.
* nds32/crt1.S: Ditto.
2014-03-21 21:16:40 +00:00
23cf8028ec
2014-03-21 Sabrini Ni <sabrinanitw@gmail.com>
...
* nds32/_argv.S: Replace syscall with break.
* nds32/_argvlen.S: Ditto.
* nds32/_chdir.S: Ditto.
* nds32/_chmod.S: Ditto.
* nds32/_close.S: Ditto.
* nds32/_exit.S: Ditto.
* nds32/_fstat.S: Ditto.
* nds32/_getpid.S: Ditto.
* nds32/_gettimeofday.S: Ditto.
* nds32/_isatty.S: Ditto.
* nds32/_kill.S: Ditto.
* nds32/_link.S: Ditto.
* nds32/_lseek.S: Ditto.
* nds32/_open.S: Ditto.
* nds32/_read.S: Ditto.
* nds32/_rename.S: Ditto.
* nds32/_stat.S: Ditto.
* nds32/_system.S: Ditto.
* nds32/_time.S: Ditto.
* nds32/_times.S: Ditto.
* nds32/_unlink.S: Ditto.
* nds32/_utime.S: Ditto.
* nds32/_write.S: Ditto.
* nds32/syscall_error_handler.S: Ditto.
* nds32/vh.h: New.
2014-03-21 21:02:52 +00:00
e59026e844
2014-03-21 Sabrini Ni <sabrinanitw@gmail.com>
...
* nds32/crt0.S: Initialize ITB base.
* nds32/crt1.S: Ditto.
2014-03-21 20:58:54 +00:00
31b1f3e55f
2014-03-21 Sabrini Ni <sabrinanitw@gmail.com>
...
* nds32/Makefile.in: Alter filename.
* nds32/syscall_argv.S: Rename to _argv.S
* nds32/syscall_argvlen.S: Rename to _argvlen.S
* nds32/syscall_chdir.S: Rename to _chdir.S
* nds32/syscall_chmod.S: Rename to _chmod.S
* nds32/syscall_close.S: Rename to _close.S
* nds32/syscall_exit.S: Rename to _exit.S
* nds32/syscall_fstat.S: Rename to _fstat.S
* nds32/syscall_getpid.S: Rename to _getpid.S
* nds32/syscall_gettimeofday.S: Rename to _gettimeofday.S
* nds32/syscall_isatty.S: Rename to _isatty.S
* nds32/syscall_kill.S: Rename to _kill.S
* nds32/syscall_link.S: Rename to _link.S
* nds32/syscall_lseek.S: Rename to _lseek.S
* nds32/syscall_open.S: Rename to _open.S
* nds32/syscall_read.S: Rename to _read.S
* nds32/syscall_rename.S: Rename to _rename.S
* nds32/syscall_sbrk.S: Rename to _sbrk.S
* nds32/syscall_stat.S: Rename to _stat.S
* nds32/syscall_system.S: Rename to _system.S
* nds32/syscall_time.S: Rename to _time.S
* nds32/syscall_times.S: Rename to _times.S
* nds32/syscall_unlink.S: Rename to _unlink.S
* nds32/syscall_utime.S: Rename to _utime.S
* nds32/syscall_write.S: Rename to _write.S
2014-03-21 20:55:57 +00:00
8194dcec36
2014-03-21 Sabrini Ni <sabrinanitw@gmail.com>
...
* nds32/syscall_argv.S: Correct the method to set errno.
* nds32/syscall_argvlen.S: Ditto.
* nds32/syscall_chdir.S: Ditto.
* nds32/syscall_chmod.S: Ditto.
* nds32/syscall_close.S: Ditto.
* nds32/syscall_error_handler.S: Ditto.
* nds32/syscall_fstat.S: Ditto.
* nds32/syscall_getpid.S: Ditto.
* nds32/syscall_gettimeofday.S: Ditto.
* nds32/syscall_isatty.S: Ditto.
* nds32/syscall_kill.S: Ditto.
* nds32/syscall_link.S: Ditto.
* nds32/syscall_lseek.S: Ditto.
* nds32/syscall_open.S: Ditto.
* nds32/syscall_read.S: Ditto.
* nds32/syscall_rename.S: Ditto.
* nds32/syscall_sbrk.S: Ditto.
* nds32/syscall_stat.S: Ditto.
* nds32/syscall_system.S: Ditto.
* nds32/syscall_time.S: Ditto.
* nds32/syscall_times.S: Ditto.
* nds32/syscall_unlink.S: Ditto.
* nds32/syscall_utime.S: Ditto.
* nds32/syscall_write.S: Ditto.
2014-03-21 20:34:46 +00:00
488d885bf3
2014-03-21 Sabrini Ni <sabrinanitw@gmail.com>
...
* nds32/crt0.S: Use pseudo-instruction "bal frame" to replace
"la + jral".
* nds32/crt1.S: Ditto.
2014-03-21 20:27:41 +00:00
d35d103f08
2014-03-21 Sabrini Ni <sabrinanitw@gmail.com>
...
* nds32/crt0.S: Eliminate initialization for $fp.
* nds32/crt1.S: Ditto.
2014-03-21 20:26:01 +00:00
b899f01579
2014-03-21 Sabrini Ni <sabrinanitw@gmail.com>
...
* nds32/crt0.S: Refine.
* nds32/crt1.S: Refine.
2014-03-21 20:24:04 +00:00
5ff6903e69
2014-03-21 Sabrini Ni <sabrinanitw@gmail.com>
...
* nds32/crt0.S: Set argc=argv=env=0.
* nds32/crt1.S: Ditto.
2014-03-21 20:22:29 +00:00
7f4230bdc8
2014-03-21 Sabrini Ni <sabrinanitw@gmail.com>
...
* nds32/Makefile.in: Add syscall_error_handler.o.
* nds32/syscall_error_handler.S: New.
* nds32/syscall_extra.h: Reduce code size.
2014-03-21 20:20:53 +00:00
9246fbeced
2014-03-21 Sabrini Ni <sabrinanitw@gmail.com>
...
* nds32/syscall_extra.h: Define macro.
* nds32/syscall_argv.S: Use define macro.
* nds32/syscall_argvlen.S: Ditto.
* nds32/syscall_chdir.S: Ditto.
* nds32/syscall_chmod.S: Ditto.
* nds32/syscall_close.S: Ditto.
* nds32/syscall_fstat.S: Ditto.
* nds32/syscall_getpid.S: Ditto.
* nds32/syscall_gettimeofday.S: Ditto.
* nds32/syscall_isatty.S: Ditto.
* nds32/syscall_kill.S: Ditto.
* nds32/syscall_link.S: Ditto.
* nds32/syscall_lseek.S: Ditto.
* nds32/syscall_open.S: Ditto.
* nds32/syscall_read.S: Ditto.
* nds32/syscall_rename.S: Ditto.
* nds32/syscall_stat.S: Ditto.
* nds32/syscall_system.S: Ditto.
* nds32/syscall_time.S: Ditto.
* nds32/syscall_times.S: Ditto.
* nds32/syscall_unlink.S: Ditto.
* nds32/syscall_utime.S: Ditto.
* nds32/syscall_write.S: Ditto.
2014-03-21 20:16:14 +00:00
065c7717b7
2014-02-27 Joey Ye <joey.ye@arm.com>
...
* libnosys/sbrk.c (_sbrk): Remove TWS
2014-03-04 17:39:26 +00:00
6a7a80d83c
2014-02-11 Joey Ye <joey.ye@arm.com>
...
* arm/syscalls.c (_sbrk): Define as weak symbols.
(_read, _write): Ditto.
2014-02-11 19:55:22 +00:00
75d1027ccd
* aarch64/Makefile.in (RDIMON_SCRIPTS): Rule to build in-tree copies
...
of scripts.
(all): Build the in-tree copies of the scripts.
(clean): Also delete the in-tree copies of the scripts.
2014-02-03 10:30:34 +00:00
ed94d4a4aa
* msp430/Makefile.in (crt0-minrt.o, crtn-minrt.o): New. Build
...
from crt0.S with -DMINRT.
(CRT_OBJS): Expand.
(crt_%.o): New rule pattern. Build multiple objects from crt0.S.
* msp430/crt0.S: Further break out functionality. Support -DMINRT
that omits all init/fini logic.
* msp430/crtn.S: Likewise.
* msp430/msp430-sim.ld: Wildcard all .crt_* sections, sorted.
* msp430/msp430.ld: Likewise.
* msp430/msp430xl-sim.ld: Likewise.
2014-01-30 02:46:34 +00:00
645ec39159
* aarch64/cpu-init/rdimon-aem-el3.S (flat_map): Use bic-immediate
...
form to clear WXN bit.
2014-01-28 11:16:19 +00:00
0388ee3d90
2014-01-24 Kyrylo Tkachov <kyrylo.tkachov@arm.com>
...
* aarch64/cpu-init/rdimon-aem-el3.S (flat_map): Clear WXN bit
in SCTLR_EL3. Add dsb.
2014-01-24 19:01:15 +00:00
9a0786ea68
2014-01-10 Jeff Johnston <jjohnstn@redhat.com>
...
* arm/configure.in: Revert previous fix and change host_makefile_frag
to calculate the absolute location of srcdir/../config/default.mh.
* arm/configure: Regenerated.
2014-01-10 23:04:01 +00:00
847980a43b
2014-01-07 Jeff Johnston <jjohnstn@redhat.com>
...
* arm/configure.in: Fix host_makefile_frag to use ac_abs_srcdir.
* arm/configure: Regenerated.
2014-01-07 22:41:38 +00:00
2f8a6f1947
2013-12-04 Steve Ellcey <sellcey@mips.com>
...
* mips/cfe_api.h: Include stdint.h.
2013-12-04 21:18:02 +00:00
c9e978ed1b
2013-11-21 Daniel Ramirez <javamonn@gmail.com>
...
* d30v/syscalls.c, i960/mon960.c, m68k/io-stat.c, mt/stat.c,
spu/lstat.c, spu/stat.c: Add restrict keyword.
2013-11-21 16:42:17 +00:00
37d3b04f88
[AArch64] Set errno in ftruncate() and truncate().
2013-11-21 15:53:52 +00:00
eee6552c95
[ARM] set errno in ftruncate and truncate stubs.
2013-11-21 15:49:05 +00:00
7c62befe16
[AArch64] Provide ftruncate() and truncate() stubs.
2013-11-18 10:04:56 +00:00
c709105913
[ARM] Provide ftruncate() and truncate() stubs.
2013-11-18 09:53:46 +00:00
639951dda7
2013-10-14 Ramana Radhakrishnan <ramana.radhakrishnan@arm.com>
...
* arm/cpu-init/rdimon-aem.S: Disable for M class cores.
* arm/crt0.S: Don't call _rdimon_hw_init_hook for non-A class cores.
* arm/cpu-init/Makefile.in (CPU_INIT_OBJS): Use CFLAGS.
2013-10-14 15:15:12 +00:00
05a8ad9f72
2013-09-30 Steve Ellcey <sellcey@mips.com>
...
* mips/Makefile.in (install): Add mkdir, fix install command.
2013-09-30 18:44:25 +00:00
1dafbdd853
[ARM] Add SPECS file for ARM validation model.
2013-09-27 15:40:39 +00:00
99be2bc4ff
2013-09-20 Matthew Gretton-Dann <matthew.gretton-dann@arm.com>
...
Ramana Radhakrishnan <ramana.radhakrishnan@arm.com>
Greta Yorsh <greta.yorsh@arm.com>
* arm/Makefile.in: Add support for cpu-init directory and add
elf-aprofile-ve.specs.
* arm/configure.in: Likewise.
* arm/configure: Regenerate.
* arm/cpu-init: New directory.
* arm/cpu-init/Makefile.in: New file.
* arm/cpu-init/rdimon-aem.S: Likewise.
* arm/crt0.S: Call _rdimon_init_hook
* arm/elf-aprofile-ve.specs: New file.
2013-09-20 14:23:41 +00:00
796a9241b3
* msp430/Makefile.in (SCRIPTS): Add intr_vectors.ld.
...
(LIB_CRT): New.
(CRT_OBJS): New.
(all): Add dependency upon LIB_CRT.
(install): Likewise.
* msp430/msp430-sim.ld: Include intr_vectors.ld.
KEEP crt code, lowtext code and tm_clone_table.
Separate the noinit section from the .bss section.
Allow for extended .debug_line sections.
* msp430/msp430.ld: Likewise.
* msp430/msp430F5438A-l.ld: Likewise.
* msp430/msp430F5438A-s.ld: Likewise.
* msp430/msp430xl-sim.ld: Likewise
. * msp430/crt_movedata.S: New.
* msp430/crt_bss.S: New.
* msp430/intr_vectors.ld: New.
2013-09-18 07:38:13 +00:00
5bff53b4f7
2013-09-17 Joey Ye <joey.ye@arm.com>
...
* libnosys/Makefile.in: Install nosys.specs.
* libnosys/nosys.specs: New specs.
2013-09-17 20:36:08 +00:00
c389cb11b8
Fix space
2013-08-12 11:29:07 +00:00
387b584725
* aarch64/crt0.S: Remove 'start'.
...
* arm/crt0.S: Ditto.
* arm/redboot-crt0.S: Ditto.
2013-08-12 11:27:37 +00:00
2dc32f6ae4
2013-07-24 Steve Ellcey <sellcey@mips.com>
...
* mips/idtmon.S (unlink, lseek, stat): Add new functions.
2013-07-24 22:32:51 +00:00
2635a8d6df
* microblaze/_exception_handler.S: Adjust to be weak.
...
* microblaze/Makefile.in: Add LINUX_BSP.
* microblaze/elf-gloss-linux.ld: New file.
* microblaze/elf-gloss-linux.specs: Likewise.
* microblaze/linux-crt0.S: Likewise.
* microblaze/linux-inbyte.c: Likewise.
* microblaze/linux-outbyte.c: Likewise.
* microblaze/linux-syscalls-wrap.c: Likewise.
* microblaze/linux-syscalls.S: Likewise.
* microblaze/linux-syscalls.h: Likewise.
2013-07-23 09:11:18 +00:00
38f2cb2c41
* lm32/configure: Regenerate.
...
* moxie/configure: Ditto.
* spu/configure: Ditto.
2013-07-17 06:14:27 +00:00
971a6c70a3
* microblaze/Makefile.in: Add GENOBJS and target_makefile_frag.
...
* microblaze/configure.in: Add target_makefile_frag.
* microblaze/configure: Regenerate.
* microblaze/xil_printf.c: Add new file.
2013-07-16 07:55:45 +00:00
6041792ec6
* configure.host: Change to microblaze*.
...
* libc/include/machine/ieeefp.h: Add __MICROBLAZEEL__.
* libc/machine/microblaze/mb_endian.h: New file.
* newlib/libc/machine/microblaze/strcmp.c: Add little endian support.
* newlib/libc/machine/microblaze/strcpy.c: Likewise.
* newlib/libc/machine/microblaze/strlen.c: Likewise.
* configure.in: Change to microblaze*.
* configure: Regenerate.
* microblaze/xilinx.ld: Remove OUTPUT_FORMAT.
2013-07-16 07:48:53 +00:00
81fc3e842a
[AArch64] Ensure vector table is page aligned.
...
2013-07-12 Marcus Shawcroft <marcus.shawcroft@arm.com>
* aarch64/cpu-init/rdimon-aem-el3.S (vectors): Page align.
2013-07-12 09:42:46 +00:00
bdf683b1c8
2013-07-09 Sabrina Ni <sabrina@andestech.com>
...
* configure.in: Add nds32 subdir.
* configure: Regenerated.
* nds32/configure.in: New.
* nds32/configure: New (autogenerated).
* nds32/{crt0.S,crt1.S}: New.
* nds32/Makefile.in: New.
* nds32/{syscall_argvlen.S,syscall_argv.S,
syscall_chdirS, syscall_chmod.S,
syscall_close.S,syscall_exit.S,syscall_extra.h, syscall_fstat.S,
syscall_getpid.S,syscall_gettimeofday.S,syscall_isatty.S,syscall_kill.S,
syscall_link.S,syscall_lseek.S,syscall_open.S,syscall_read.S,
syscall_rename.S,syscall_sbrk.S,syscall_stat.S,syscall_system.S,
syscall_time.S,syscall_times.S,syscall_unlink.S,syscall_utime.S,
syscall_write.S}: New.
2013-07-09 19:16:25 +00:00
a5be77b2fe
* aarch64/syscalls.c (stack_ptr): Defined with asm ("wsp") if __ILP32__
...
is defined.
2013-07-04 10:21:52 +00:00
2404223df6
2013-07-02 Joey Ye <joey.ye@arm.com>
...
* arm/crt0.S (_mainCRTStartup): Weak reference to atexit and _fini
when lite exit is enabled.
2013-07-02 21:34:35 +00:00
b5cfad0bf1
* aarch64/syscalls.c (POINTER_TO_PARAM_BLOCK_T): New macro.
...
(initialise_monitor_handles): Replace cast with macro
POINTER_TO_PARAM_BLOCK_T.
(_swiread): Likewise.
(_swiwrite): Likewise.
(_swiopen): Likewise.
(_unlink): Likewise.
(_system): Likewise.
(_rename): Likewise.
2013-06-28 09:34:46 +00:00
15b1ed6dc7
* aarch64/crt0.S (GEN_DWORD): New macro definition.
...
(PTR_REG): Ditto.
(PTR_SIZE): Ditto.
(PTR_LOG_SIZE): Ditto.
(start): Use GEN_DWORD to replace the .dword of HeapBase,
__bss_start__, __bss_end__, FUNCTION(_fini), env and
CommandLine; when __ILP32__ is defined, set the stack base to
the top end of the 32-bit address space if the returned value
from the Angel API call is larger than or equal to 4 GiB.
Also carry out sanity check on the heap base; abort if the
base is larger than or equal to 4 GiB. Use other new
macros in the instructions that processes the argv arrays.
(StackBase): New lable; replace __stack_base__.
(__stack_base__): Set with StackBase or StackBase + 4.
2013-06-25 12:06:15 +00:00
6d28d61df0
2013-05-30 Jeff Johnston <jjohnstn@redhat.com>
...
* rs6000/Makefile.in: Add sim-times support. This file has been
moved from newlib/libc/machine/powerpc and renamed.
* rs6000/sim-times.c: New file.
2013-05-30 22:44:04 +00:00
2f2a304234
[newlib]
...
* configure.host (msp430): Add.
* libc/include/machine/ieeefp.h: Add MSP430 support.
* libc/include/machine/setjmp.h: Likewise.
* libc/include/sys/config.h: Likewise.
* libc/machine/configure.in (msp430): Add.
* libc/machine/configure: Regenerate.
* libc/machine/msp430: New directory.
[libgloss]
* configure.in (msp430*-*-elf): Add.
* configure: Regenerate.
* msp430: New directory.
2013-05-13 21:39:51 +00:00
c22112f61a
2013-04-19 Steve Ellcey <sellcey@imgtec.com>
...
* mips/cfe_api.h (int64_t): Remove define.
(uint64_t): Remove define.
(intptr_t): Remove define.
(uintptr_t): Remove define.
(sys/types.h): Remove include.
(_ansi.h): Remove include.
2013-04-19 22:06:34 +00:00
289a9a6d9b
[AArch64] Honour CFLAGS.
...
2013-04-19 Yufeng Zhang <yufeng.zhang@arm.com>
* aarch64/Makefile.in (rdimon-crt0.o, rdimon-trap.o)
(rdimon-_exit.o, rdimon-_kill.o, rdimon-syscalls.o)
(rdimon-libcfunc.o): Add $(CFLAGS) to the compiler command line.
* aarch64/cpu-init/Makefile.in (${CPU_INIT_OBJS}): Add $(CFLAGS)
to the compiler command line.
2013-04-19 14:24:45 +00:00
6cb2bb7166
Fix wrongly applied patch
2013-02-12 15:26:30 +00:00
6fb8fc9012
* libgloss/rx/Makefile.in: Respect DESTDIR when installing
2013-02-11 08:28:46 +00:00
29507fecb4
* arm/elf-rdimon.specs (-lrdimon): Change link to lib.
2013-02-10 11:57:51 +00:00
92825fd954
* crt0.S: Add recognition of the e3v5 architecture variant.
2013-02-01 08:29:04 +00:00
761dfa99ba
Correcting my previous commit.
...
In my previous commit I forget to cvs add two new files, this commit
corrects my mistake.
2013-01-22 09:49:27 +00:00
085461c3ec
2013-01-18 Marcus Shawcroft <marcus.shawcroft@arm.com>
...
* aarch64/Machine.in (RDIMON_SCRIPTS):
Add aem-ve.specs and aem-validation.specs.
* aarch64/elf-aem-validation.specs: New file.
* aarch64/elf-aem-ve.specs: New file.
2013-01-18 15:52:32 +00:00
7d88a8d373
* libc/sys/sysnecv850/crt0.S (_start): Enable FPU for the
...
V850e2v3.
* v850/crt0.S (_start): Enable FPU for the V850e2v3.
2013-01-15 15:41:31 +00:00
24fb7750f3
2012-12-17 Stuart Henderson <shenders@gcc.gnu.org>
...
* bfin/Makefile.in: Add BF60x support.
* bfin/basiccrt.S: Add core1 support.
* bfin/bf606.ld: New file.
* bfin/bf606c0.ld: New file.
* bfin/bf606c1.ld: New file.
* bfin/bf606m.ld: New file.
* bfin/bf607.ld: New file.
* bfin/bf607c0.ld: New file.
* bfin/bf607c1.ld: New file.
* bfin/bf607m.ld: New file.
* bfin/bf608.ld: New file.
* bfin/bf608c0.ld: New file.
* bfin/bf608c1.ld: New file.
* bfin/bf608m.ld: New file.
* bfin/bf609.ld: New file.
* bfin/bf609c0.ld: New file.
* bfin/bf609c1.ld: New file.
* bfin/bf609m.ld: New file.
* bfin/bfin-common-mc0.ld: New file.
* bfin/include/cdefBF606.h : New file.
* bfin/include/cdefBF607.h : New file.
* bfin/include/cdefBF608.h : New file.
* bfin/include/cdefBF609.h : New file.
* bfin/include/defBF606.h : New file.
* bfin/include/defBF607.h : New file.
* bfin/include/defBF608.h : New file.
* bfin/include/defBF609.h : New file.
* bfin/include/sys/_adi_platform.h: Add BF60x support.
* bfin/include/sys/anomaly_macros_rtl.h : Clean up.
2012-12-17 17:44:38 +00:00
77a74ed692
* aarch64/configure.in: Replace the direct generation of
...
cpu-init/Makefile.in with AC_CONFIG_SUBDIRS(cpu-init).
* aarch64/configure: Re-generate.
* aarch64/cpu-init/Makefile.in (objtype): Remove.
(Makefile, config.status): Update the rules.
* aarch64/cpu-init/aclocal.m4: New file (generated).
* aarch64/cpu-init/configure.in: New file.
* aarch64/cpu-init/configure: New file (generated).
2012-11-23 10:43:31 +00:00
a910b33ad2
Minor debugging aid for the moxie port.
2012-10-27 19:41:18 +00:00
Jeff Johnston
Nick Clifton
Mike Frysinger
Corinna Vinschen
Yaakov Selkowitz
Eric Botcazou
DJ Delorie
Anthony Green
Richard Earnshaw
Steve Ellcey
Joel Sherrill
Marcus Shawcroft