(mainly in fhandler*) start fixing gcc 4.7.2 mismatch between regparm
definitions and declarations.
* gendef: Define some functions to take @ declaration to accommodate _regN
defines which use __stdcall.
* gentls_offsets: Define __regN macros as empty.
* autoload.cc (wsock_init): Remove unneeded regparm attribute.
* winsup.h (__reg1): Define.
(__reg2): Define.
(__reg3): Define.
* advapi32.cc (DuplicateTokenEx): Coerce some initializers to avoid warnings
from gcc 4.7.2.
* exceptions.cc (status_info): Declare struct to use NTSTATUS.
(cygwin_exception::dump_exception): Coerce e->ExceptionCode to NTSTATUS.
* fhandler_clipboard.cc (cygnativeformat): Redefine as UINT to avoid gcc 4.7.2
warnings.
(fhandler_dev_clipboard::read): Ditto.
output_mutex on CTRL-S/CTRL-Q to avoid a deadlock.
* fhandler_tty.cc (fhandler_pty_slave::write): Loop when output_stopped is
detected before acquiring output_mutex. Acquire output_mutex in the loop for
each write.
* tty.h: Remove some obsolete defines.
(tty_min::output_stopped): Make 'bool'.
for stuff".
* fhandler.cc (fhandler_base_overlapped::wait_overlapped): Use simplified arg
form of cygwait.
* fhandler_console.cc (fhandler_console::read): Ditto.
* fhandler_audio.cc (fhandler_dev_dsp::Audio_out::waitforspac): Ditto.
(fhandler_dev_dsp::Audio_in::waitfordata): Ditto.
* fhandler_fifo.cc (fhandler_fifo::wait): Ditto.
* fhandler_serial.cc (fhandler_serial::raw_read): Ditto.
(fhandler_serial::raw_write): Ditto.
* select.cc (cygwin_select): Ditto.
* sigproc.h (cygwait): Rename from cygWFMO. Define two argument and single
argument forms of this function.
* fhandler_tty.cc (fhandler_pty_slave::open): Use method to query if tty is
open.
(fhandler_pty_slave::read): Send SIGHUP when master is detected as closed.
(fhandler_pty_common::close): Close input_available_event in callers since
master may need to signal it first.
(fhandler_pty_master::close): Lie and set input_available_event when closing,
then close input_available_event.
(fhandler_pty_slave::close): Close input_available_event explicitly here.
* tty.h (tty::is_master_closed): Declare new method.
logs easier. Throughout, change /dev/tty* to /dev/pty*. Throughout, add flags
argument to fhandler_*::dup methods.
* devices.in: Rename (temporarily?) /dev/ttyN to /dev/ptyN. Add /dev/ptymN
devices for pty masters.
* devices.cc: Regenerate.
* devices.h (MAX_CONSOLES): Set to max number supported by devices.in.
(fh_devices::FH_PTMX): Rename from FH_PTYM.
(device::operator int): Return by reference.
* dtable.cc (fh_alloc): Take pc as an argument rather than just the device.
This makes debugging easier since more information is available. Actually
implement handling for already-allocated pty master devices. Make different
decisions when generating fhandler for not-opened devices. Add kludge to deal
with opening /dev/tty.
(cnew_no_ctor): New macro.
(build_fh_pc): Make debugging output more verbose. Use new clone() fhandler
interface to duplicate archetypes. Reset last term opened.
(dtable::dup_worker): Use Use new clone() fhandler interface to duplicate
archetypes. Pass flags to child dup handler.
(dtable::dup3): Set O_NOCTTY flag if newfd is not stdin/stdout/stderr.
* fhandler.cc (fhandler_base::reset): Rename from operator =() and reduce
functionality and sense of copy direction.
(fhandler_base::open_with_arch): Use published interface to query io_handle().
Use new copyto() fhandler method to copy from/to found archetype.
* fhandler.h: Throughout, delete size(), add copyout, clone, and fhandler_*
(void *) methods.
(fhandler_base::reset): Rename from operator =().
(fhandler_termios::is_dev_tty): Delete.
(fhandler_termios): change "protected" region to "private".
(fhandler_termios::is_dev_tty): Delete.
(fhandler_termios): Rearrange protected/public.
(fhandler_termios::fhandler_termios): Remember last fhandler_termios "opened".
(fhandler_termios::~fhandler_termios): Forget last fhandler_termios opened.
(ioctl): Rename from ioctl_termios. Take a void * argument. Reflect argument
change in pinfo::set_ctty.
(fhandler_console::dup): Declare new function. Set ctty here if appropriate.
(fhandler_pty_master::from_master): Privatize.
(fhandler_pty_master::to_master): Ditto.
(fhandler_pty_master::dwProcessId): Ditto.
(fhandler_pty_master::fhandler_pty_master): Add an `int' argument.
(fhandler_pty_master::open_setup): Declare new function.
(fhandler_pty_master::~fhandler_pty_master): Declare new method.
(fhandler_nodevice): Remove commented out function declaration.
* fhandler_console.cc: Use get_ttyp() instead of tc() throughout.
(fhandler_console::dup): Define new function to set controlling ctty on dup, as
appropriate.
(fhandler_console::ioctl): Reflect ioctl_termios name change.
(fhandler_console::setup): Rename from get_tty_stuff.
(fhandler_console::open_setup): Reflect argument change in pinfo::set_ctty.
(fhandler_console::fhandler_console): Set _tc here.
* fhandler_termios.cc (handler_termios::ioctl): Rename. Take a void * arg like
other ioctl functions.
* fhandler_tty.cc (fhandler_pty_slave::dup): Call myself->set_ctty to
potentially reset the controlling terminal.
(fhandler_pty_slave::ioctl): Reflect name/arg change for ioctl_termios.
(fhandler_pty_slave::fhandler_pty_slave): Take a "unit" argument. Call setup()
here so that we will know the unit number of this fhandler as soon as possible.
Set the unit as appropriate.
(handler_pty_master::open): Move most stuff to constructor and open_setup.
(handler_pty_slave::open_setup): Reflect argument change in pinfo::set_ctty.
(handler_pty_master::open_setup): Define new function.
(fhandler_pty_master::cleanup): Clear handles as a flag that the destructor
does not have to do "close" operations.
(fhandler_pty_master::close): Ditto.
(fhandler_pty_master::~fhandler_pty_master): Define new method.
(fhandler_pty_master::ioctl): Reflect name/arg change for ioctl_termios.
(fhandler_pty_master::setup): Allocate tty here. Rely on handles being
returned from allocated test rather than opening them here. Avoid setting
_need_nl here since it is already zeroed in the constructor. Set up device
information with DEV_TTYM_MAJOR.
* path.h (path_conv &operator =): Take a const argument.
(path_conv::dup): Ditto.
(pathconv_arg::PC_OPEN): New enum.
(pathconv_arg::PC_CTTY): Ditto.
(path_types::PATH_CTTY): Ditto.
(path_types::PATH_OPEN): Ditto.
(path_conv::isopen): New method.
(path_conv::isctty_capable): Ditto.
* path.cc (path_conv::check): Set PATH_OPEN and PATH_CTTY as appropriate.
* pipe.cc (fhandler_pipe::open): Use copyto to copy pipe handle.
* syscall.cc (open): Reinstate fd > 2 check to disallow resetting ctty on
non-std* handles.
* tty.cc (tty_list::allocate): Pass out handles for allocated tty. use
`not_allocated' to find unallocated ttys. Avoid keeping the lock since the
allocation of the tty should be sufficient to prevent multiple access.
(tty::not_allocated): Clarify comment. Rename. Return handles when an unused
tty is found. Simply test for existing tty.
(tty::exists): Rewrite to use `not_allocated'.
* tty.h (NTTYS): Reset down to actual number supported by devices.in.
(tty::not_allocated): Declare new function.
(tty_list::allocate): Pass out read/write tty handles. Zero them when not
found.
* fhandler_proc.cc: Reflect name change from FH_PTYM -> FH_PTMX.
* pinfo.h (pinfo::set_ctty): Reduce/reorder arguments passed in.
* pinfo.cc (pinfo::set_ctty): Ditto. Just use tc() built into the passed-in
fhandler_termios pointer. Return true if ctty is assigned.
* syscalls.cc (open): Call build_fh_pc with PC_OPEN flag. Set PC_CTTY if
appropriate.
(stat_worker): Remove is_dev_tty () stuff.
when writing.
* fhandler.h: Include "tty.h".
(fhandler_termios::_tc): Rename from tc.
(fhandler_termios::tc): New method.
(fhandler_termios::tcinit): Remove an argument.
(fhandler_termios::get_ttyp): Use method to retrieve value.
(fhandler_console::console_state): Move here.
(fhandler_console::dev_state): Delete.
(fhandler_console::shared_console_info): Define.
(fhandler_console::open_shared_console): Move this function under
fhandler_console umbrella.
(fhandler_console::tc): Define. Return static value.
(fhandler_console::focus_aware): Accommodate deletion of dev_state.
(fhandler_console): Add tty_list::get_cttyp as a friend.
* fhandler_console.cc (dev_state): Redefine as a pointer within
shared_console_info and change dev-> to dev. throughout.
(fhandler_console::shared_console_info): Move into fhandler_console.
(fhandler_console::open_shared_console): Move into fhandler_console change
argument to simple bool.
(enum_windows): Accommodate changes to console_state and open_shared_console.
(console_unit::console_unit): Ditto.
(fhandler_console::get_tty_stuff): Accommodate change to dev_state.
(tty_list::get_cttyp): Accommodate change to
handler_console::shared_console_info.
(fhandler_console::read): Accommodate change from tc to tc ().
(fhandler_console::set_input_state): Ditto.
(fhandler_console::open): Accommodate tcinit argument change and change from tc
to tc().
(fhandler_console::input_tcsetattr): Accomodate change from tc to tc().
(fhandler_console::input_tcsetattr): Ditto.
(fhandler_console::write_normal): Ditto.
(fhandler_console::init): Ditto.
(fhandler_console::igncr_enabled): Ditto.
* fhandler_termios.cc (fhandler_termios::tcinit): Remove first argument.
Expect tc() to have been set up first. Use tc() rather than tc.
(fhandler_termios::tcsetpgrp): Accomodate change from tc to tc().
(fhandler_termios::tcgetpgrp): Ditto.
(fhandler_termios::bg_check): Ditto.
(fhandler_termios::line_edit: Ditto.
(fhandler_tty_master::set_winsize): Ditto.
(fhandler_tty_slave::open): Ditto.
(fhandler_tty_slave::init): Ditto.
(fhandler_pty_master::write): Ditto.
(fhandler_pty_master::setup): Ditto. Accommodate change in arguments to
tcinit.
(fhandler_tty_slave::fch_open_handles): Set _tc directly.
(tty_min::is_orphaned_process_group): Don't assume that parent pid exists.
* pinfo.cc (_pinfo::set_ctty): Reset myself->{pgid,sid} here if we were started
by a non-Cygwin process but the tty exists.
* shared_info.h (console_state): Delete from here.
* tty.h: Make multiple inclusion safe.
process group has no leader as this is allowed and does not imply an orphaned
process group. Add a test for orphaned process groups.
(tty_min::is_orphaned_process_group): Define new function.
* tty.h (tty_min::is_orphaned_process_group): Define new function.
* child_info.h: Redefine CURR_CHILD_INFO_MAGIC.
(child_info_fork::abort): Rename from handle_failure. Change arguments.
* cygtls.h (_local_storage::ttybuf): New field.
* dcrt0.cc (vapi_fatal): Split api_fatal. Add "in forked process" to message
when appropriate.
(api_fatal): Use vapi_fatal.
* devices.h: Make multiple inclusion safe.
(fh_devices): Add FH_CONS* stuff. Reorder slightly.
(device): Eliminate anonymous union. Add more ways to access minor/major.
(device::setunit): Accommodate no-longer-anonymous union.
(device::is_fs): Ditto.
(device::is_fs_special): Ditto.
(device::major): New function.
(device::minor): Ditto.
(device::is_device): New function.
(device::not_device): Ditto.
(device::operator int): New operator.
(device::operator fh_devices): Ditto.
(device::operator bool): Ditto.
(device::operator DWORD): Ditto.
(device::operator =): Ditto.
(isproc_dev): New function.
(isprocsys_dev): Ditto.
(iscons_dev): Ditto.
(istty_slave_dev): Ditto.
* devices.in: Add new "/dev/cons*" strings. Accommodate no-longer-anonymous
union throughout.
(BRACK): Use more precise method for initialization.
* devices.cc: Regenerate.
* dtable.cc (dtable::stdio_init): Use get_cttyp instead of get_tty.
(dtable::find_archetype): Use new DWORD operator in device to test archetypes.
(dtable::init_std_file_from_handle): Use different method to initialize 'dev'.
Adapt to different ctty handling and accommodate /dev/cons*.
(fh_alloc): Accommodate no-longer-anonymous union. Adapt to new /dev/cons*.
(build_fh_pc): Make debugging output more useful.
* exceptions.cc (ctrl_c_handler): Use get_cttyp instead of get_tty.
* external.cc (fillout_pinfo): Accommodate new cons* stuff.
* fhandler.cc (fhandler_base::read): Eliminate is_slow() test.
* fhandler.h (fhandler_base::*): Adapt to changes in device.h.
(fhandler_*::is_slow): Delete.
( fhandler_proc::get_proc_fhandler): Return fh_devices type.
* fhandler_console.cc (open_shared_console): New function.
(console_unit): New class.
(console_unit::console_unit): New constructor.
(enum_windows): New function. Declare as friend to console_unit.
(fhandler_console::set_unit): New function.
(fhandler_console::get_tty_stuff): Call set_unit to set the unit number and
determine if initialization is needed. Eliminate flags parameter.
(tty_list::get_cttyp): Rename (sorta) from get_tty. Return pointer to correct
tty_min.
(fhandler_console::open): Adapt to elimination of argument to get_tty_stuff.
(fhandler_console::output_tcsetattr): Properly detect error condition.
(fhandler_console::fixup_after_fork_exec): Adapt to get_tty_stuff() setting tc
automatically.
* fhandler_proc.cc: Use FH_BAD rather than 0 throughout where using fh_devices
enum.
(fhandler_proc::get_proc_fhandler): Return fh_devices. Adapt to devices.h
changes.
* fhandler_process.cc: Adapt to devices.h changes. Use FH_BAD rather than 0
throughout where using fh_devices enum.
* fhandler_procnet.cc: Ditto.
* fhandler_procsys.cc: Ditto.
* fhandler_procsysvipc.cc: Ditto.
* fhandler_tape.cc (fhandler_dev_tape::fhandler_dev_tape): Ditto.
* fhandler_termios.cc (handler_termios::bg_check): Use tc->ttyname() rather
than assuming that we can construct a tty.
* fhandler_tty.cc (fhandler_tty_master::fhandler_tty_master): Just return
get_minor() of dev.
(fhandler_pty_master::process_slave_output): Add slightly more debugging info.
(fhandler_tty_slave::fhandler_tty_slave): Change name from ntty to unit.
(fhandler_pty_master::open): Ditto.
(fhandler_tty_slave::ioctl): Adapt to change which causes ctty to represent a
complete device.
(fhandler_tty_master::init_console): Add debugging for failure path.
(fhandler_pty_master::setup): Use get_unit() to retrieve unit number rather
than relying on raw ntty.
(fhandler_pty_master::setup): Ditto.
* fhandler_virtual.h (virt_tab_t): Redefine fhandler as fh_devices.
* fork.cc: Remove obsolete vfork stuff.
(frok::child): Don't assume that a ctty == 0 is valid.
* mount.cc (mount_info::conv_to_win32_path): Adapt to device struct changes.
(mount_info::conv_to_win32_path): Ditto.
* path.cc (path_conv::check): Retrive major/minor numbers via a method rather
than accessing them directly from device. Rely on dev operators to
set/retrieve device information as required by device struct change.
* path.h (isproc_dev): Move to devices.h.
(isprocsys_dev): Ditto.
(isvirtual_dev): Ditto.
(path_conv:{isdevice,isfifo,isspecial,iscygdrive,issocket,get_devn,get_unitn}):
Use device methods to access/manipulate devices.
* pinfo.cc (pinfo::exit): Don't assume that ctty == 0 is valid. Use iscons_dev
to determine if a device is a console.
(_pinfo::_ctty): Use device::parse to generate tty/cons name.
(_pinfo::set_ctty): Don't assume that ctty == 0 is valid. Remove redundant
info from debugging.
* shared.cc (offsets): Remove console offset.
* shared_info.h (shared_locations): Ditto.
* syscalls.cc (umask): Use device methods to manipulate device information.
(ctermid): Use device::parse to generate term device name.
* tlsoffsets.h: Regenerate.
* tty.cc (ttyslot): Return minor number of ctty since ctty now represents a
full device.
(tty::create_master): Set ctty to a complete device.
(tty_list::attach): Rework to detect new /dev/cons* stuff.
(tty_list::terminate): Adapt to changes to ctty.
(tty_list::init): Adapt to change to setntty - pass in device major number.
(tty::exists): Use get_unit() to retrive tty unit number.
(tty::open_mutex): Ditto.
(tty::open_inuse): Ditto.
(tty::create_inuse): Ditto.
(tty::get_event): Ditto.
(tty_min::ttyname): Define new function.
* tty.h (tty_min::ntty): Redefine as fh_devices.
(tty::exists): Use get_unit() to retrive tty unit number.
(tty::open_mutex): Ditto.
(tty::open_inuse): Ditto.
(tty::create_inuse): Ditto.
(tty::get_event): Ditto.
(tty_min::ttyname): Declare new function.
(tty::getntty): Declare as const.
(tty_list::operator []): Assure that only minor part of argument is used.
* dll_init.cc (dll_list::alloc): Detect mismatch of data segments early issuing
an explicit error message if necessary.
* heap.cc (heap_init): Adapt to changes from fork->handle_failure to
fork->abort.
* pinfo.h (EXITCODE_FORK_FAILED): New enum. (from Ryan Johnson)
* sigproc.cc (child_info_fork::abort): Rename from handle_failure. Change
arguments to allow passing in a printf-like message.
* winsup.h (api_fatal): Delete macro definition.
(api_fatal): Redefine from __api_fatal.
(vapi_fatal): Declare new function.
* include/sys/strace.h (strace_vprintf): Define new macro.
* ntdll.h (_SYSTEM_INFORMATION_CLASS): Add SystemHandleInformation.
* fhandler.h (fhandler_tty_slave::fch_open_handles): Declare private.
(fhandler_tty_slave::fch_close_handles): Ditto.
(fhandler_tty_slave::cygserver_attach_tty): Drop declaration.
(fhandler_tty_slave::fstat): Declare public.
(fhandler_tty_slave::fchmod): Declare public.
(fhandler_tty_slave::fchown): Declare public.
(class fhandler_pty_master): Add master_ctl handle.
(fhandler_pty_master::pty_master_thread): Declare public.
* fhandler_termios.cc (fhandler_termios::tcinit): If the process
is started from a non-Cygwin process, make it tty process group
leader.
* fhandler_tty.cc: Throughout accommodate additional security related
arguments in calls to functions creating or opening objects.
(close_maybe): Move to start of file to reuse it
in other methods.
(struct pipe_request): Define.
(struct pipe_reply): Define.
(fhandler_tty_slave::open): Throughout, try to open synchronization
objects with MAXIMUM_ALLOWED permissions. Drop call to cygserver.
Try to duplicate pipe handles via master_ctl pipe if duplicating
directly doesn't work.
(fhandler_tty_slave::cygserver_attach_tty): Remove.
(fhandler_tty_slave::init): Close unused incoming pipe handle.
(fhandler_pty_master::close): Send exit message to master control
thread and close master_ctl handle.
(fhandler_pty_master::pty_master_thread): New method, implementing the
master control thread.
(pty_master_thread): Static helper to start master control thread.
(fhandler_pty_master::setup): Simplify creating pipe inheritance.
Make sure we're the one creating the input_available_event. Add
comment to explain why. Create master_ctl pipe and start master
control thread. Close master_ctl handle in case of error.
* security.cc (alloc_sd): Add code to handle tty objects. Add comments
to explain what exactly is required.
(get_object_sd): New function.
(get_object_attribute): New function.
(create_object_sd_from_attribute): New function.
(set_object_sd): New function.
(set_object_attribute): New function.
(set_file_attribute): Change attribute type to mode_t.
* security.h (set_file_attribute): Change attribute type to mode_t.
(get_object_sd): Declare.
(get_object_attribute): Declare.
(create_object_sd_from_attribute): Declare.
(set_object_sd): Declare.
(set_object_attribute): Declare.
* tty.cc (tty::slave_alive): Implement directly instead of via alive.
(tty::exists): Open mutex handle with READ_CONTROL access.
(tty::alive): Remove.
(tty::open_output_mutex): Convert to inline method.
(tty::open_input_mutex): Ditto.
(tty::open_mutex): Take additional ACCESS_MASK parameter for the
mutex open access mask.
(tty::open_inuse): New method.
(tty::create_inuse): Take PSECURITY_ATTRIBUTES parameter. Drop fmt
name parameter. Always create TTY_SLAVE_ALIVE event.
(tty::get_event): Take additional PSECURITY_ATTRIBUTES parameter for
CreateEvent.
* tty.h (class tty): Change declarations according to aforementioned
changes.
(tty::open_output_mutex): Implement as inline method.
(tty::open_input_mutex): Ditto.
(initial_env): Set jit_debug when we are automatically starting a gdb process.
* dtable.cc (dtable::get_debugger_info): Don't tty tricks when we are being
debugged by our own captive gdb, as determined by jit_debug == true.
(dtable::init_std_file_from_handle): Detect errors when initializing a tty
early rather than at random points later.
* fhandler.h (fhandler_*::init): Return int to indicate success/failure.
* fhandler.cc (fhandler_base::init): Reflect change in return value.
* pipe.cc (fhandler_pipe::init): Ditto.
(fhandler_pipe::create_selectable): Don't say we're retrying when we aren't.
* fhandler_console.cc (fhandler_console::init): Ditto. Return success/failure.
* fhandler_serial.cc (fhandler_serial::init): Ditto.
* fhandler_tty.cc (fhandler_tty_slave::init): Ditto.
(fhandler_tty_slave::open): Make debugging output more detailed.
* tty.cc (tty_list::terminate): Don't close I/O handles before all slaves have
checked in.
(tty::slave_alive): Make a non-inlined function. Check if tty pipe handles can
be created as an additional exists check.
* tty.h (tty::slave_alive): Just define here.
* fhandler_tape.cc (mt): Define as DLL shared area in
.cygwin_dll_common instead of as dynamically allocated area.
Change referencing throughout.
* mtinfo.h (mt_h): Remove entirely.
(mt): Remove extern declaration.
* shared.cc (cygwin_shared_area): New global cygwin_shared
variable located in .cygwin_dll_common.
(offsets): Define shared region addresses descending from
cygwin_shared_address.
(open_shared): Replace usage of SH_CYGWIN_SHARED by SH_USER_SHARED.
(memory_init): Set cygwin_shared just by pointing to cygwin_shared_area.
* shared_info.h (shared_locations): Remove SH_CYGWIN_SHARED and
SH_MTINFO.
(cygwin_shared_address): Define as DLL start address.
* tty.h (tty_min::tty_min): Remove constructor.
(dll_crt0_1): Reflect renaming from tty_init to tty::init_session.
(do_exit): Reflect moving of tty_terminate into tty_list.
* exceptions.cc (events_init): Move tty_mutex stuff elsewhere.
* fhandler_console.cc (set_console_title): Use lock_ttys class.
* fhandler_termios.cc (fhandler_termios::bg_check): Make debug output more
accurate.
* fhandler_tty.cc (fhandler_tty_slave::open): Reflect move of attach_tty into
tty_list class. Don't attempt to grab master end of pty if master doesn't
exist.
(fhandler_pty_master::open): Reflect move of allocate_tty into tty_list class.
Use lock_ttys::release to release mutex. Improve debugging output.
(fhandler_pty_master::setup): Remove if 0'ed block. Fix argument to
SetNamedPipeHandleState.
* pinfo.cc (_pinfo::set_ctty): Lock ttys before setting sid/pgid. Improve
debugging. Add temporary debugging.
* tty.cc (tty_list::init_session): New function.
(tty::init_session): Rename from tty_init. Reflect move of attach_tty to
tty_list class.
(tty::create_master): Rename from create_tty_master.
(tty_list::attach): Rename from attach_tty. Reflect renaming of connect_tty to
connect. Ditto for allocate_tty.
(tty_terminate): Delete.
(tty_list::terminate): Subsume tty_terminate. Use lock_ttys rather than
manipulating mutex directly.
(tty_list::allocate): Rename from allocate_tty. Use lock_ttys rather than
manipulating mutex directly. Don't set sid here since linux apparently doesn't
do this. Reflect move of create_tty_master into tty.
(lock_ttys::lock_ttys): Define new constructor.
(lock_ttys::release): New function.
* tty.h (tty::exists): Return false immediately if !master_pid.
(tty::set_master_closed): Define new function.
(tty::create_master): Ditto.
(tty::init_session): Ditto.
(tty_list::mutex): New field.
(tty_list::allocate): Define new function.
(tty_list::connect): Ditto.
(tty_list::attach): Ditto.
(tty_list::init_session): Ditto.
(lock_ttys): New class.
(tty_init): Delete declaration.
(tty_terminate): Ditto.
(attach_tty): Ditto.
(create_tty_master): Ditto.
* fhandler.h (fhandler_base::fixup_after_exec): Make non-inline.
(fhandler_termios::fixup_after_fork): Delete declaration.
(fhandler_termios::fixup_after_exec): Ditto.
(fhandler_tty_common::inuse): Remove.
(fhandler_tty_common::dup): Delete declaration.
(fhandler_tty_common::fixup_after_fork): Ditto.
(fhandler_tty_slave::fixup_after_exec): Declare new function.
(fhandler_pty_master::dwProcessId): New variable.
(fhandler_pty_master::from_master): Ditto.
(fhandler_pty_master::to_master): Ditto.
(fhandler_pty_master::setup): New function.
(fhandler_pty_master::fixup_after_fork): Ditto.
(fhandler_pty_master::fixup_after_exec): Ditto.
* fhandler_termios.cc (fhandler_termios::fixup_after_exec): Delete definition.
(fhandler_termios::fixup_after_fork): Ditto.
* fhandler_tty.cc (fhandler_tty_master::init): Use fhandler_pty_master setup
function rather than obsolete tty::common_init. Delete obsolete inuse setting.
(fhandler_tty_slave::fhandler_tty_slave): Set inuse to NULL here.
(fhandler_tty_slave::open): Change debugging output for clarity. Check for
different things when doing a sanity check on the tty. Reflect the fact that
master_pid now is the cygwin pid rather than the windows pid. Use "arch"
rather than "archetype" for consistency.
(fhandler_tty_slave::close): Close inuse here.
(fhandler_tty_slave::dup): Remove old if 0'ed code.
(fhandler_pty_master::dup): New function. Handles pty master archetype.
(fhandler_pty_master::fhandler_pty_master): Zero pty_master specific fields.
(fhandler_pty_master::open): Implement using archetypes, similar to slave. Use
fhandler_pty_master setup function rather than obsolete tty::common_init.
Don't set inuse.
(fhandler_tty_common::close): Don't deal with inuse. Delete old if 0'ed code.
(fhandler_pty_master::close): Implement using archetypes. Close from_master
and to_master.
(fhandler_tty_common::set_close_on_exec): Just set close_on_exec flag here
since everything uses archetypes now.
(fhandler_tty_common::fixup_after_fork): Delete definition.
(fhandler_tty_slave::fixup_after_exec): Define new function.
(fhandler_pty_master::setup): New function, derived from tty::common_init.
(fhandler_pty_master::fixup_after_fork): New function.
(shared_info.h): Reset SHARED_INFO_CB to reflect new tty size.
* tty.cc (tty_list::terminate): Close individual handles from tty_master.
(tty::master_alive): Delete.
(tty::make_pipes): Ditto.
(tty::common_init): Ditto.
* tty.h (tty::from_slave): Delete.
(tty::to_slave): Ditto.
(tty::common_init): Delete declaration.
(tty::make_pipes): Ditto.
(tty::master_pid): Define as pid_t since it is now a cygwin pid.
(tty::gethwnd): Ditto.
(tty::sethwnd): Ditto.
(tty_min::hwnd): Receive variable from tty class.
(tty_min::gethwnd): Receive function from tty classs.
(tty_min::sethwnd): Ditto.
* dtable.cc (dtable::stdio_init): Only call init_console_handler when we
actually own the console.
* fhandler_console.cc (fhandler_console::get_tty_stuff): Set tty's hwnd to
non-zero value.
* fhandler_termios.cc (fhandler_termios::tcsetpgrp): Semi-reinstate handling of
console when pgrp is set.
* tty.h (tty_list::allocate_tty): Turn argument into a boolean.
* tty.cc (tty_list::init): Protect entire allocation operation with tty_mutex
(formerly title_mutex) to protect against allocation races.
* tty.h: Remove the %d or %x from all cygtty strings.
(tty::open_output_mutex): Only declare.
(tty::open_input_mutex): Ditto.
(tty::open_mutex): New definition.
* fhandlet_tty.cc (fhandler_tty_slave::open): Declare buf with
size CYG_MAX_PATH and replace __small_printf calls by shared_name.
* tty.cc (tty::create_inuse): Ditto.
(tty::get_event): Ditto.
(tty::common_init): Ditto.
(tty::open_output_mutex): New method definition.
(tty::open_input_mutex): Ditto.
(tty::open_mutex): New method.
tty_min, mtinfo and fs_info thoroughout.
* fhandler.h: Redefine all set_close_on_exec methods to take a bool
argument.
(enum conn_state): Rename from connect_state.
(class fhandler_base): Rename some status flags to align with
accessor method names. Drop encoded flag entirely. Unify status
accessor methods. Const'ify all read accessor methods.
(class fhandler_socket): Ditto.
(class fhandler_dev_raw): Ditto.
* fhandler_disk_file.cc (fhandler_base::fstat_fs): Use fs.fs_is_fat()
instead of evaluating FATness of file system here.
(fhandler_disk_file::opendir): Drop call to set_encoded().
(fhandler_disk_file::readdir): Use pc.isencoded() directly.
* mtinfo.h (class mtinfo_drive): Const'ify all read accessor methods.
* path.cc (fsinfo_cnt): Add.
(fs_info::update): Accomodate class changes. Evaluate file system
name specific flags right here. Add thread safety for reading and
writing global fsinfo array.
* path.h (enum path_types): Drop values for flags kept in fs already.
(struct fs_info): Move status informatin into private struct type
status_flags. Add accessor methods. Remove path and file system
name string arrays in favor of status bits.
(class path_conv): Use new fs_info status information where
appropriate.
(path_conf::fs_has_ea): Rename from fs_fast_ea.
(path_conf::fs_has_acls): New method.
(path_conf::root_dir): Remove.
(path_conf::volname): Remove.
* syscalls (statfs): Evaluate root dir locally.
* tty.h (class tty_min): Unify status accessor methods. Const'ify
all read accessor methods.
(fhandler_tty_master::fixup_after_exec): Ditto.
* fhandler_tty.cc (fhandler_tty_master::init): Fix so that children do not
inherit master tty handles.
(fhandler_tty_master::fixup_after_fork): Remove, since it was never used.
(fhandler_tty_master::fixup_after_exec): Ditto.
* pinfo.cc (_pinfo::set_ctty): Increment open_fhs when ctty is set.
* cygheap.cc (cygheap_init): Ditto.
* syscalls.cc (setsid): *Always* call close on opened ctty since the archetype
is associated with the ctty and it counts as an opened handle.
* tty.cc (tty::common_init): Don't protect input/output mutex since it confuses
subsequent fork/execs when CYGWIN=tty.
throughout.
* tty.cc (tty::common_init): Remove call to SetKernelObjectSecurity and edit
some comments.
* cygheap.h (init_cygheap::ctty): Add new element.
* devices.in (device::parse): Remove special handling for /dev/tty.
* devices.cc: Regenerate.
* dtable.cc (build_fh_pc): Don't reset /dev/tty device. Let the device opener
do that.
* fhandler_termios.cc (tty_min::set_ctty): Redefine to _pinfo class.
* fhandler_tty.cc (fhandler_tty_common::set_close_on_exec): Avoid setting
noninherit flag for ctty.
* tty.h: Move BOOLs to bools.
(tty_min::set_ctty): Redeclare to _pinfo class.
* pinfo.cc (_pinfo::set_ctty): Define new function based on tty_min::set_ctty.
Change first argument from tty number to tty_min class.
* pinfo.h (_pinfo::set_ctty): Declare.
* fhandler_console.cc (fhandler_console::get_tty_stuff): Reflect move of
set_ctty to _pinfo class.
* fhandler_tty.cc (fhandler_tty_slave::open): Treat FH_TTY specially. Use
saved cygheap value if it exists. Otherwise convert to real device and save on
first time open.
(fhandler_tty_common::dup): Potentially set controlling tty if duping a slave
tty.
* syscalls.cc (setsid): Close controlling tty in cygheap.
* tty.cc: Change some BOOLs to bools.
muto. Use this argument to construct static storage.
* cygheap.cc (cygheap_init): Reflect above change.
* exceptions.cc (events_init): Ditto.
* malloc.cc (malloc_init): Ditto.
* path.cc (cwdstuff::init): Ditto.
* cygheap.h (cwdstuff): Change name of lock element to make it less generic.
* path.cc (cwdstuff::get_hash): Ditto.
(cwdstuff::get_initial): Ditto.
(cwdstuff::set): Ditto.
(cwdstuff::get): Ditto.
* sigproc.cc (proc_subproc): Ditto.
* debug.cc (lock_debug): Change to method. Use method rather than macro
throughout.
* tty.h (tty_min::kill_pgrp): Declare new method.
* fhandler_termios.cc (tty_min::kill_pgrp): New method.
(fhandler_termios::line_edit): Use new method for killing process.
* dcrt0.cc (do_exit): Ditto.
* dtable.cc (dtable::get_debugger_info): New method for inheriting dtable info
from a debugger.
* tty.cc (tty_init): Attempt to grab file handle info from parent debugger, if
appropriate. # dtable.cc (dtable::stdio_init): Make this a method.
(dtable::init_std_file_from_handle): Don't set fd unless it's not open.
(dtable::build_fhandler_from_name): Move name setting to
dtable::build_fhandler.
(dtable::build_fhandler): Add win32 name parameter.
* dcrt0.cc (dll_crt0_1): Change to use dtable stdio_init.
* dtable.h (dtable): Reflect build_fhandler parameter change.
* mmap.cc (mmap_record::alloc_fh): Don't set name parameter in build_fhandler.
* net.cc (fdsock): Remove set_name call since it is now handled by
build_fhandler.
* sigproc.cc (proc_subproc): Release muto as early as possible.
(setclexec_pid): New function for marking saved handle as close-on-exec.
(delete_handle): New function.
(debug_fixup_after_fork): New function.
* debug.h: Declare new functions, remove obsolete ones.
* fork.cc (debug_fixup_after_fork): Call to cleanup close-on-exec handles.
* fhandler.cc (fhandler_disk_file::close): Minor reorg.
(fhandler_base::set_inheritance): Set flag appropriately for debugging when
close-on-exec so forked process can delete closed handles.
* tty.h (open_output_mutex): Eliminate unneeded argument.
(open_input_mutex): Ditto.
* fhandler_tty.cc (fhandler_tty_slave::open): reflect open_*_mutex argument
changes.
* fhandler.h (fhandler_socket): Make saw_shutdown_* functions type bool.
* tty.cc (tty::get_event): Eliminate unneeded argument.
(tty::common_init): Reflect change to get_event. Events should always be
inherited.
Throughout, change 'OutputStopped' to 'output_stopped', for consistency.
* dtable.cc (stdio_init): Set controlling tty if not set by stdio opens.
* exceptions.cc (ctrl_c_handler): Avoid special pgid checking if no tty is
associated with the process.
(Suggested by Tim Baker <dbaker@direct.ca>)
* external.cc (fillout_pinfo): Return actual tty number for ctty.
* fhandler_console.cc (get_tty_stuff): Set ctty when shared memory is
allocated. Accept flags input from open().
(set_console_ctty): New function.
(fhandler_console::open): Pass flags to get_tty_stuff and rely on this function
to set the ctty, if appropriate.
* fhandler_termios.cc (fhandler_termios::set_ctty): Move to tty_min class.
* fhandler_tty.cc (fhandler_tty_slave::open): Use tc field to access
set_ctty().
* tty.h (TTY_CONSOLE): Move to include/sys/cygwin.h.
(tty_min): Add set_ctty class here.
* include/sys/cygwin.h (TTY_CONSOLE): New home here.
* path.cc (symlink_info): Make contents an actual buffer. Pass more flags to
case_check.
(path_conv::check): Reorganize to do parsing based on posix path rather than
native path.
(symlink_info::check): Expect posix path as input. Translate to native path
here. Accept path_conv flags. Stop parsing if not a symlink regardless of
whether previous path was a symlink.
syncronize input on master tty with slave tty.
* fhandler_tty.cc (fhandler_pty_master::accept_input): Use them to
syncronize with slave.
* fhandler_tty.cc (fhandler_tty_slave::read): Use input mutex and
event to syncronize with master. Do not limit amount of data read
from master to vmin value. Interrupt on signal and return already
read data, if any.
* fhandler_tty.cc (fhandler_tty_slave::open): Handle input mutex and
event.
* fhandler_tty.cc (fhandler_tty_common::close): Ditto.
* fhandler_tty.cc (fhandler_tty_common::set_close_on_exec): Ditto.
* fhandler_tty.cc (fhandler_tty_common::fixup_after_fork): Ditto.
* fhandler_tty.cc (fhandler_tty_common::dup): Ditto.
* tty.h (tty::open_input_mutex): New function.
* tty.cc (tty::common_init): Create input mutex and event.
Include sys/termios.h for files which need it.
* tty.h: New file.
* shared_info.h: New file.
* fhandler.h: Move inline methods that rely on tty stuff to
fhandler_console.cc.
* fhandler_tty.cc (fhandler_pty_master::process_slave_output): Set
output_done_event immediately after reading data to speed up tty output
processing.
(process_output): Set write_error to errno or zero.
(fhandler_tty_slave::write): Check previous write error prior to writing to
slave end of pipe. This allows tty output to be slightly less synchronous.
* fhandler_console.cc (fhandler_console::tcsetpgrp): Moved here from
fhandler.h.
(fhandler_console::set_input_state): Ditto.
Corinna Vinschen
Christopher Faylor
Pierre Humblet
Egor Duda