* Makefile.in: Add missing line continuation `\' for $(SUBDIRS) target.

Add variables and targets to control binary and source distributions.
	Add variables and targets to control snapshot distribution.
	* profile/gmon.h: Add missing #endif for #ifndef.
	* profile/ChangeLog: Merge entries here and remove.
	* profile/Makefile.in: Add variables and targets to control
	distribution.
	* README: Add.
	* TODO: ditto.
	* config.guess: ditto.
	* config.sub: ditto.
	* mkinstalldirs: ditto.
	* install-sh: ditto.
	* configure: regenerate.
	* profile/configure: ditto.

winsup/mingw/ChangeLog

@@ -1,3 +1,21 @@
+2000-11-21  Earnie Boyd  <earnie_boyd@yahoo.com>
+
+	* Makefile.in: Add missing line continuation `\' for $(SUBDIRS) target.
+	Add variables and targets to control binary and source distributions.
+	Add variables and targets to control snapshot distribution.
+	* profile/gmon.h: Add missing #endif for #ifndef.
+	* profile/ChangeLog: Merge entries here and remove.
+	* profile/Makefile.in: Add variables and targets to control 
+	distribution.
+	* README: Add.
+	* TODO: ditto.
+	* config.guess: ditto.
+	* config.sub: ditto.
+	* mkinstalldirs: ditto.
+	* install-sh: ditto.
+	* configure: regenerate.
+	* profile/configure: ditto.
+
 2000-11-20  Earnie Boyd  <earnie_boyd@yahoo.com>
 
 	* Merge in changes from
@@ -118,6 +136,8 @@ Tue Dec 21 02:22:14 1999  Mumit Khan  <khan@xraylith.wisc.edu>
 
 Thu Nov 18 00:22:26 1999  Mumit Khan  <khan@xraylith.wisc.edu>
 
+	* profile/profil.c (profile_on): Set the profiler thread priority to
+	be time critical. Thanks to Pascal Obry <pascal_obry@csi.com>.
 	* Snapshot 1999-11-18.
 
 Sun Nov  7 02:50:09 1999  Mumit Khan  <khan@xraylith.wisc.edu>
@@ -129,6 +149,7 @@ Sun Nov  7 02:50:09 1999  Mumit Khan  <khan@xraylith.wisc.edu>
 	* dirent.h (struct _stat): Rename from struct stat.
 	* include/tchar.h: Add some new macros. Thanks to
 	Eric Kohl <ekohl@abo.rhein-zeitung.de>.
+	* profile/Makefile.in (install): Fix target.
 
 Thu Nov  4 14:32:58 1999  Mumit Khan  <khan@xraylith.wisc.edu>
 
@@ -136,6 +157,18 @@ Thu Nov  4 14:32:58 1999  Mumit Khan  <khan@xraylith.wisc.edu>
 	* configure.in: Likewise.
 	* configure: Regenerate.
 
+	* profile: Imported profiling sources from winsup-19991026 snapshot.
+	* profile/Makefile.in: New file.
+	* profile/configure.in: New file.
+	* profile/configure: Generate.
+	* profile/gcrt0.c (u_char, u_short, u_int, u_long): typedef for Mingw.
+	* profile/gmon.h (u_char, u_short, u_int, u_long): Likewise.
+	* profile/gmon.c (unistd.h): Include conditionally.
+	(sys/param.h): Likewise.
+	* profile/mcount.c (sys/param.h): Likewise.
+	* profile/profil.c (profile_on): thread id is DWORD, not int.
+
+
 Wed Nov  3 16:26:44 1999  Mumit Khan  <khan@xraylith.wisc.edu>
 
 	* include/stdlib.h: Add wide character version of argv/environ.

winsup/mingw/Makefile.in

@@ -17,6 +17,9 @@
 
 # This makefile requires GNU make.
 
+PACKAGE = mingw-runtime
+VERSION = 0.4
+
 VPATH = @srcdir@
 srcdir = @srcdir@
 objdir = .
@@ -54,9 +57,9 @@ CXXFLAGS = @CXXFLAGS@
 # compiling with Cygwin?
 MNO_CYGWIN = @MNO_CYGWIN@
 ifdef MNO_CYGWIN
-subdirforlib=/mingw
+   subdirforlib=/mingw
 else
-libdir=
+   libdir=
 endif
 
 # Either crtdll (CRT_ID 1) or msvcrt (CRT_ID 2).
@@ -89,6 +92,7 @@ DLLTOOL_FLAGS = --as $(AS_FOR_TARGET)
 DLLWRAP = @DLLWRAP@
 DLLWRAP_FOR_TARGET = $(DLLWRAP)
 DLLWRAP_FLAGS = --dlltool $(DLLTOOL) --as $(AS) --driver-name $(CC)
+TAR = tar
 
 SUBDIRS := @SUBDIRS@
 
@@ -113,10 +117,17 @@ LIBS = libcrtdll.a libmsvcrt.a libmsvcrt20.a libmsvcrt40.a libmingw32.a \
 
 DLLS = $(THREAD_DLL_NAME)
 
+SRCDIST_FILES = CRT_noglob.c CRTfmode.c CRTglob.c CRTinit.c ChangeLog \
+Makefile.in README TODO config.guess config.sub configure configure.in \
+crt1.c crtdll.def crtmt.c crtst.c ctype_old.c dirent.c dllcrt1.c dllmain.c \
+gccmain.c init.c install-sh jamfile main.c mkinstalldirs moldname-crtdll.def \
+moldname-msvcrt.def moldname.def moldname.def.in msvcrt.def msvcrt20.def \
+msvcrt40.def mthr.c mthr_init.c mthr_stub.c readme.txt string_old.c
+
 all_dlls_host = @all_dlls_host@
 install_dlls_host = @install_dlls_host@
 
-all : $(CRT0S) $(LIBS) $(all_dlls_host)
+all: $(CRT0S) $(LIBS) $(all_dlls_host)
 	@$(MAKE) subdirs DO=$@ $(FLAGS_TO_PASS)
 
 all_dlls_host: $(DLLS)
@@ -199,6 +210,45 @@ distclean:
 	-rm -f config.cache config.status config.log 
 	-rm -f Makefile
 
+ifdef SNAPSHOT
+   distdir=$(PACKAGE)-$(VERSION)-$(SNAPDATE)
+else
+   distdir=$(PACKAGE)-$(VERSION)
+endif
+
+dist: srcdist bindist
+
+srcdist:
+	rm -rf $(distdir)
+	mkdir $(distdir)
+	chmod 755 $(distdir)
+	for i in $(SRCDIST_FILES); do \
+		cp -p $(srcdir)/$$i $(distdir)/$$i ; \
+	done
+	for i in $(SUBDIRS); do \
+		(cd $$i; $(MAKE) distdir=../$(distdir) dist); \
+	done
+#FIXME this needs to be done with SUBDIRS and Makefiles.
+	mkdir $(distdir)/include
+	mkdir $(distdir)/include/sys
+	cp $(srcdir)/include/*.h $(distdir)/include/
+	cp $(srcdir)/include/sys/*.h $(distdir)/include/sys/
+	rm -f $(distdir)-src.tar.gz
+	$(TAR) czf $(distdir)-src.tar.gz $(distdir)
+
+
+bindist:
+	rm -rf $(distdir)
+	mkdir $(distdir)
+	chmod 755 $(distdir)
+	$(MAKE) install prefix=../$(distdir)
+	rm -f $(distdir).tar.gz
+	cd $(distdir); $(TAR) czf ../$(distdir).tar.gz .
+
+SNAPDATE = $(shell date '+%Y%m%d')
+snapshot: 
+	make dist SNAPSHOT=1
+
 info:
 
 info-html:
@@ -235,7 +285,7 @@ subdirs: $(SUBDIRS)
 	  echo "Making $(DO) in $@..." ; \
 	  if (rootme=`pwd`/ ; export rootme ; \
 	    rootsrc=`cd $(srcdir); pwd`/ ; export rootsrc ; \
-	    cd ./$@; 
+	    cd ./$@; \
 	    $(MAKE) $(FLAGS_TO_PASS) $(DO)) ; then true ; \
 	  else exit 1 ; fi ; \
 	else true ; fi ; \

winsup/mingw/README

@@ -0,0 +1,10 @@
+	Free Win32 runtime and import library definitions
+
+	Maintained by MinGW Developers
+	Send bug reports and questions to MinGW-users@lists.sourceforge.net
+	URL: http://www.mingw.org
+
+A historical readme.txt exists and is distributed for your edification.  The 
+references within may or may not be correct.  Please do not rely on them.  See
+http://www.mingw.org for a list of valid references.
+

winsup/mingw/TODO

@@ -0,0 +1 @@
+Finish the README.

winsup/mingw/configure

@@ -28,7 +28,6 @@ program_suffix=NONE
 program_transform_name=s,x,x,
 silent=
 site=
-sitefile=
 srcdir=
 target=NONE
 verbose=
@@ -143,7 +142,6 @@ Configuration:
   --help                  print this message
   --no-create             do not create output files
   --quiet, --silent       do not print \`checking...' messages
-  --site-file=FILE        use FILE as the site file
   --version               print the version of autoconf that created configure
 Directory and file names:
   --prefix=PREFIX         install architecture-independent files in PREFIX
@@ -314,11 +312,6 @@ EOF
   -site=* | --site=* | --sit=*)
     site="$ac_optarg" ;;
 
-  -site-file | --site-file | --site-fil | --site-fi | --site-f)
-    ac_prev=sitefile ;;
-  -site-file=* | --site-file=* | --site-fil=* | --site-fi=* | --site-f=*)
-    sitefile="$ac_optarg" ;;
-
   -srcdir | --srcdir | --srcdi | --srcd | --src | --sr)
     ac_prev=srcdir ;;
   -srcdir=* | --srcdir=* | --srcdi=* | --srcd=* | --src=* | --sr=*)
@@ -484,16 +477,12 @@ fi
 srcdir=`echo "${srcdir}" | sed 's%\([^/]\)/*$%\1%'`
 
 # Prefer explicitly selected file to automatically selected ones.
-if test -z "$sitefile"; then
+if test -z "$CONFIG_SITE"; then
-  if test -z "$CONFIG_SITE"; then
+  if test "x$prefix" != xNONE; then
-    if test "x$prefix" != xNONE; then
+    CONFIG_SITE="$prefix/share/config.site $prefix/etc/config.site"
-      CONFIG_SITE="$prefix/share/config.site $prefix/etc/config.site"
+  else
-    else
+    CONFIG_SITE="$ac_default_prefix/share/config.site $ac_default_prefix/etc/config.site"
-      CONFIG_SITE="$ac_default_prefix/share/config.site $ac_default_prefix/etc/config.site"
-    fi
   fi
-else
-  CONFIG_SITE="$sitefile"
 fi
 for ac_site_file in $CONFIG_SITE; do
   if test -r "$ac_site_file"; then
@@ -562,7 +551,7 @@ else { echo "configure: error: can not run $ac_config_sub" 1>&2; exit 1; }
 fi
 
 echo $ac_n "checking host system type""... $ac_c" 1>&6
-echo "configure:566: checking host system type" >&5
+echo "configure:555: checking host system type" >&5
 
 host_alias=$host
 case "$host_alias" in
@@ -583,7 +572,7 @@ host_os=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
 echo "$ac_t""$host" 1>&6
 
 echo $ac_n "checking build system type""... $ac_c" 1>&6
-echo "configure:587: checking build system type" >&5
+echo "configure:576: checking build system type" >&5
 
 build_alias=$build
 case "$build_alias" in
@@ -609,7 +598,7 @@ fi
 # Extract the first word of "${ac_tool_prefix}gcc", so it can be a program name with args.
 set dummy ${ac_tool_prefix}gcc; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:613: checking for $ac_word" >&5
+echo "configure:602: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -641,7 +630,7 @@ if test -n "$ac_tool_prefix"; then
   # Extract the first word of "gcc", so it can be a program name with args.
 set dummy gcc; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:645: checking for $ac_word" >&5
+echo "configure:634: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -677,7 +666,7 @@ if test -z "$CC"; then
   # Extract the first word of "cc", so it can be a program name with args.
 set dummy cc; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:681: checking for $ac_word" >&5
+echo "configure:670: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -726,7 +715,7 @@ fi
 fi
 
 echo $ac_n "checking whether we are using GNU C""... $ac_c" 1>&6
-echo "configure:730: checking whether we are using GNU C" >&5
+echo "configure:719: checking whether we are using GNU C" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_gcc'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -735,7 +724,7 @@ else
   yes;
 #endif
 EOF
-if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:739: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
+if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:728: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
   ac_cv_prog_gcc=yes
 else
   ac_cv_prog_gcc=no
@@ -750,7 +739,7 @@ if test $ac_cv_prog_gcc = yes; then
   ac_save_CFLAGS="$CFLAGS"
   CFLAGS=
   echo $ac_n "checking whether ${CC-cc} accepts -g""... $ac_c" 1>&6
-echo "configure:754: checking whether ${CC-cc} accepts -g" >&5
+echo "configure:743: checking whether ${CC-cc} accepts -g" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_cc_g'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -791,7 +780,7 @@ esac
 # Extract the first word of "${ac_tool_prefix}ar", so it can be a program name with args.
 set dummy ${ac_tool_prefix}ar; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:795: checking for $ac_word" >&5
+echo "configure:784: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_AR'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -823,7 +812,7 @@ if test -n "$ac_tool_prefix"; then
   # Extract the first word of "ar", so it can be a program name with args.
 set dummy ar; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:827: checking for $ac_word" >&5
+echo "configure:816: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_AR'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -860,7 +849,7 @@ fi
 # Extract the first word of "${ac_tool_prefix}as", so it can be a program name with args.
 set dummy ${ac_tool_prefix}as; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:864: checking for $ac_word" >&5
+echo "configure:853: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_AS'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -892,7 +881,7 @@ if test -n "$ac_tool_prefix"; then
   # Extract the first word of "as", so it can be a program name with args.
 set dummy as; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:896: checking for $ac_word" >&5
+echo "configure:885: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_AS'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -928,7 +917,7 @@ fi
 # Extract the first word of "${ac_tool_prefix}ranlib", so it can be a program name with args.
 set dummy ${ac_tool_prefix}ranlib; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:932: checking for $ac_word" >&5
+echo "configure:921: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -960,7 +949,7 @@ if test -n "$ac_tool_prefix"; then
   # Extract the first word of "ranlib", so it can be a program name with args.
 set dummy ranlib; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:964: checking for $ac_word" >&5
+echo "configure:953: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -996,7 +985,7 @@ fi
 # Extract the first word of "${ac_tool_prefix}ld", so it can be a program name with args.
 set dummy ${ac_tool_prefix}ld; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1000: checking for $ac_word" >&5
+echo "configure:989: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_LD'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -1028,7 +1017,7 @@ if test -n "$ac_tool_prefix"; then
   # Extract the first word of "ld", so it can be a program name with args.
 set dummy ld; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1032: checking for $ac_word" >&5
+echo "configure:1021: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_LD'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -1064,7 +1053,7 @@ fi
 # Extract the first word of "${ac_tool_prefix}dlltool", so it can be a program name with args.
 set dummy ${ac_tool_prefix}dlltool; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1068: checking for $ac_word" >&5
+echo "configure:1057: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_DLLTOOL'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -1096,7 +1085,7 @@ if test -n "$ac_tool_prefix"; then
   # Extract the first word of "dlltool", so it can be a program name with args.
 set dummy dlltool; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1100: checking for $ac_word" >&5
+echo "configure:1089: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_DLLTOOL'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -1132,7 +1121,7 @@ fi
 # Extract the first word of "${ac_tool_prefix}dlltool", so it can be a program name with args.
 set dummy ${ac_tool_prefix}dlltool; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1136: checking for $ac_word" >&5
+echo "configure:1125: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_DLLWRAP'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -1164,7 +1153,7 @@ if test -n "$ac_tool_prefix"; then
   # Extract the first word of "dlltool", so it can be a program name with args.
 set dummy dlltool; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1168: checking for $ac_word" >&5
+echo "configure:1157: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_DLLWRAP'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -1200,7 +1189,7 @@ fi
 # Extract the first word of "${ac_tool_prefix}windres", so it can be a program name with args.
 set dummy ${ac_tool_prefix}windres; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1204: checking for $ac_word" >&5
+echo "configure:1193: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_WINDRES'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -1232,7 +1221,7 @@ if test -n "$ac_tool_prefix"; then
   # Extract the first word of "windres", so it can be a program name with args.
 set dummy windres; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1236: checking for $ac_word" >&5
+echo "configure:1225: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_WINDRES'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -1267,7 +1256,7 @@ fi
 
 
 echo $ac_n "checking how to run the C preprocessor""... $ac_c" 1>&6
-echo "configure:1271: checking how to run the C preprocessor" >&5
+echo "configure:1260: checking how to run the C preprocessor" >&5
 # On Suns, sometimes $CPP names a directory.
 if test -n "$CPP" && test -d "$CPP"; then
   CPP=
@@ -1282,13 +1271,13 @@ else
   # On the NeXT, cc -E runs the code through the compiler's parser,
   # not just through cpp.
   cat > conftest.$ac_ext <<EOF
-#line 1286 "configure"
+#line 1275 "configure"
 #include "confdefs.h"
 #include <assert.h>
 Syntax Error
 EOF
 ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:1292: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:1281: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
 ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
 if test -z "$ac_err"; then
   :
@@ -1299,13 +1288,13 @@ else
   rm -rf conftest*
   CPP="${CC-cc} -E -traditional-cpp"
   cat > conftest.$ac_ext <<EOF
-#line 1303 "configure"
+#line 1292 "configure"
 #include "confdefs.h"
 #include <assert.h>
 Syntax Error
 EOF
 ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:1309: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:1298: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
 ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
 if test -z "$ac_err"; then
   :
@@ -1316,13 +1305,13 @@ else
   rm -rf conftest*
   CPP="${CC-cc} -nologo -E"
   cat > conftest.$ac_ext <<EOF
-#line 1320 "configure"
+#line 1309 "configure"
 #include "confdefs.h"
 #include <assert.h>
 Syntax Error
 EOF
 ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:1326: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:1315: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
 ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
 if test -z "$ac_err"; then
   :
@@ -1349,19 +1338,19 @@ echo "$ac_t""$CPP" 1>&6
 # The Ultrix 4.2 mips builtin alloca declared by alloca.h only works
 # for constant arguments.  Useless!
 echo $ac_n "checking for working alloca.h""... $ac_c" 1>&6
-echo "configure:1353: checking for working alloca.h" >&5
+echo "configure:1342: checking for working alloca.h" >&5
 if eval "test \"`echo '$''{'ac_cv_header_alloca_h'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 1358 "configure"
+#line 1347 "configure"
 #include "confdefs.h"
 #include <alloca.h>
 int main() {
 char *p = alloca(2 * sizeof(int));
 ; return 0; }
 EOF
-if { (eval echo configure:1365: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:1354: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
   rm -rf conftest*
   ac_cv_header_alloca_h=yes
 else
@@ -1382,12 +1371,12 @@ EOF
 fi
 
 echo $ac_n "checking for alloca""... $ac_c" 1>&6
-echo "configure:1386: checking for alloca" >&5
+echo "configure:1375: checking for alloca" >&5
 if eval "test \"`echo '$''{'ac_cv_func_alloca_works'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 1391 "configure"
+#line 1380 "configure"
 #include "confdefs.h"
 
 #ifdef __GNUC__
@@ -1415,7 +1404,7 @@ int main() {
 char *p = (char *) alloca(1);
 ; return 0; }
 EOF
-if { (eval echo configure:1419: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:1408: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
   rm -rf conftest*
   ac_cv_func_alloca_works=yes
 else
@@ -1447,12 +1436,12 @@ EOF
 
 
 echo $ac_n "checking whether alloca needs Cray hooks""... $ac_c" 1>&6
-echo "configure:1451: checking whether alloca needs Cray hooks" >&5
+echo "configure:1440: checking whether alloca needs Cray hooks" >&5
 if eval "test \"`echo '$''{'ac_cv_os_cray'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 1456 "configure"
+#line 1445 "configure"
 #include "confdefs.h"
 #if defined(CRAY) && ! defined(CRAY2)
 webecray
@@ -1477,12 +1466,12 @@ echo "$ac_t""$ac_cv_os_cray" 1>&6
 if test $ac_cv_os_cray = yes; then
 for ac_func in _getb67 GETB67 getb67; do
   echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:1481: checking for $ac_func" >&5
+echo "configure:1470: checking for $ac_func" >&5
 if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 1486 "configure"
+#line 1475 "configure"
 #include "confdefs.h"
 /* System header to define __stub macros and hopefully few prototypes,
     which can conflict with char $ac_func(); below.  */
@@ -1505,7 +1494,7 @@ $ac_func();
 
 ; return 0; }
 EOF
-if { (eval echo configure:1509: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:1498: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
   rm -rf conftest*
   eval "ac_cv_func_$ac_func=yes"
 else
@@ -1532,7 +1521,7 @@ done
 fi
 
 echo $ac_n "checking stack direction for C alloca""... $ac_c" 1>&6
-echo "configure:1536: checking stack direction for C alloca" >&5
+echo "configure:1525: checking stack direction for C alloca" >&5
 if eval "test \"`echo '$''{'ac_cv_c_stack_direction'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -1540,7 +1529,7 @@ else
   ac_cv_c_stack_direction=0
 else
   cat > conftest.$ac_ext <<EOF
-#line 1544 "configure"
+#line 1533 "configure"
 #include "confdefs.h"
 find_stack_direction ()
 {
@@ -1559,7 +1548,7 @@ main ()
   exit (find_stack_direction() < 0);
 }
 EOF
-if { (eval echo configure:1563: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
+if { (eval echo configure:1552: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
 then
   ac_cv_c_stack_direction=1
 else
@@ -1609,7 +1598,7 @@ else { echo "configure: error: can not run $ac_config_sub" 1>&2; exit 1; }
 fi
 
 echo $ac_n "checking host system type""... $ac_c" 1>&6
-echo "configure:1613: checking host system type" >&5
+echo "configure:1602: checking host system type" >&5
 
 host_alias=$host
 case "$host_alias" in
@@ -1630,7 +1619,7 @@ host_os=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
 echo "$ac_t""$host" 1>&6
 
 echo $ac_n "checking target system type""... $ac_c" 1>&6
-echo "configure:1634: checking target system type" >&5
+echo "configure:1623: checking target system type" >&5
 
 target_alias=$target
 case "$target_alias" in
@@ -1648,7 +1637,7 @@ target_os=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
 echo "$ac_t""$target" 1>&6
 
 echo $ac_n "checking build system type""... $ac_c" 1>&6
-echo "configure:1652: checking build system type" >&5
+echo "configure:1641: checking build system type" >&5
 
 build_alias=$build
 case "$build_alias" in
@@ -1740,7 +1729,7 @@ MKINSTALLDIRS=$ac_aux_dir/mkinstalldirs
 # SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff"
 # ./install, which can be erroneously created by make from ./install.sh.
 echo $ac_n "checking for a BSD compatible install""... $ac_c" 1>&6
-echo "configure:1744: checking for a BSD compatible install" >&5
+echo "configure:1733: checking for a BSD compatible install" >&5
 if test -z "$INSTALL"; then
 if eval "test \"`echo '$''{'ac_cv_path_install'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6

winsup/mingw/install-sh

@@ -0,0 +1,253 @@
+#!/bin/sh
+#
+# install - install a program, script, or datafile
+# This comes from X11R5 (mit/util/scripts/install.sh).
+#
+# Copyright 1991 by the Massachusetts Institute of Technology
+#
+# Permission to use, copy, modify, distribute, and sell this software and its
+# documentation for any purpose is hereby granted without fee, provided that
+# the above copyright notice appear in all copies and that both that
+# copyright notice and this permission notice appear in supporting
+# documentation, and that the name of M.I.T. not be used in advertising or
+# publicity pertaining to distribution of the software without specific,
+# written prior permission.  M.I.T. makes no representations about the
+# suitability of this software for any purpose.  It is provided "as is"
+# without express or implied warranty.
+#
+# Calling this script install-sh is preferred over install.sh, to prevent
+# `make' implicit rules from creating a file called install from it
+# when there is no Makefile.
+#
+# This script is compatible with the BSD install script, but was written
+# from scratch.  It can only install one file at a time, a restriction
+# shared with many OS's install programs.
+
+
+# set DOITPROG to echo to test this script
+
+# Don't use :- since 4.3BSD and earlier shells don't like it.
+doit="${DOITPROG-}"
+
+
+# put in absolute paths if you don't have them in your path; or use env. vars.
+
+mvprog="${MVPROG-mv}"
+cpprog="${CPPROG-cp}"
+chmodprog="${CHMODPROG-chmod}"
+chownprog="${CHOWNPROG-chown}"
+chgrpprog="${CHGRPPROG-chgrp}"
+stripprog="${STRIPPROG-strip}"
+rmprog="${RMPROG-rm}"
+mkdirprog="${MKDIRPROG-mkdir}"
+
+transformbasename=""
+transform_arg=""
+instcmd="$mvprog"
+chmodcmd="$chmodprog 0755"
+chowncmd=""
+chgrpcmd=""
+stripcmd=""
+rmcmd="$rmprog -f"
+mvcmd="$mvprog"
+src=""
+dst=""
+dir_arg=""
+
+while [ x"$1" != x ]; do
+    case $1 in
+	-c) instcmd="$cpprog"
+	    shift
+	    continue;;
+
+	-d) dir_arg=true
+	    shift
+	    continue;;
+
+	-m) chmodcmd="$chmodprog $2"
+	    shift
+	    shift
+	    continue;;
+
+	-o) chowncmd="$chownprog $2"
+	    shift
+	    shift
+	    continue;;
+
+	-g) chgrpcmd="$chgrpprog $2"
+	    shift
+	    shift
+	    continue;;
+
+	-s) stripcmd="$stripprog"
+	    shift
+	    continue;;
+
+	-t=*) transformarg=`echo $1 | sed 's/-t=//'`
+	    shift
+	    continue;;
+
+	-b=*) transformbasename=`echo $1 | sed 's/-b=//'`
+	    shift
+	    continue;;
+
+	*)  if [ x"$src" = x ]
+	    then
+		src=$1
+	    else
+		# this colon is to work around a 386BSD /bin/sh bug
+		:
+		dst=$1
+	    fi
+	    shift
+	    continue;;
+    esac
+done
+
+if [ x"$src" = x ]
+then
+	echo "install:	no input file specified"
+	exit 1
+else
+	true
+fi
+
+if [ x"$dir_arg" != x ]; then
+	dst=$src
+	src=""
+	
+	if [ -d $dst ]; then
+		instcmd=:
+		chmodcmd=""
+	else
+		instcmd=mkdir
+	fi
+else
+
+# Waiting for this to be detected by the "$instcmd $src $dsttmp" command
+# might cause directories to be created, which would be especially bad 
+# if $src (and thus $dsttmp) contains '*'.
+
+	if [ -f $src -o -d $src ]
+	then
+		true
+	else
+		echo "install:  $src does not exist"
+		exit 1
+	fi
+	
+	if [ x"$dst" = x ]
+	then
+		echo "install:	no destination specified"
+		exit 1
+	else
+		true
+	fi
+
+# If destination is a directory, append the input filename; if your system
+# does not like double slashes in filenames, you may need to add some logic
+
+	if [ -d $dst ]
+	then
+		dst="$dst"/`basename $src`
+	else
+		true
+	fi
+fi
+
+## this sed command emulates the dirname command
+dstdir=`echo $dst | sed -e 's,[^/]*$,,;s,/$,,;s,^$,.,'`
+
+# Make sure that the destination directory exists.
+#  this part is taken from Noah Friedman's mkinstalldirs script
+
+# Skip lots of stat calls in the usual case.
+if [ ! -d "$dstdir" ]; then
+defaultIFS='	
+'
+IFS="${IFS-${defaultIFS}}"
+
+oIFS="${IFS}"
+# Some sh's can't handle IFS=/ for some reason.
+IFS='%'
+set - `echo ${dstdir} | sed -e 's@/@%@g' -e 's@^%@/@'`
+IFS="${oIFS}"
+
+pathcomp=''
+
+while [ $# -ne 0 ] ; do
+	pathcomp="${pathcomp}${1}"
+	shift
+
+	if [ ! -d "${pathcomp}" ] ;
+        then
+		$mkdirprog "${pathcomp}"
+	else
+		true
+	fi
+
+	pathcomp="${pathcomp}/"
+done
+fi
+
+if [ x"$dir_arg" != x ]
+then
+	$doit $instcmd $dst &&
+
+	if [ x"$chowncmd" != x ]; then $doit $chowncmd $dst; else true ; fi &&
+	if [ x"$chgrpcmd" != x ]; then $doit $chgrpcmd $dst; else true ; fi &&
+	if [ x"$stripcmd" != x ]; then $doit $stripcmd $dst; else true ; fi &&
+	if [ x"$chmodcmd" != x ]; then $doit $chmodcmd $dst; else true ; fi
+else
+
+# If we're going to rename the final executable, determine the name now.
+
+	if [ x"$transformarg" = x ] 
+	then
+		dstfile=`basename $dst`
+	else
+		dstfile=`basename $dst $transformbasename | 
+			sed $transformarg`$transformbasename
+	fi
+
+# don't allow the sed command to completely eliminate the filename
+
+	if [ x"$dstfile" = x ] 
+	then
+		dstfile=`basename $dst`
+	else
+		true
+	fi
+
+# Make a temp file name in the proper directory.
+
+	dsttmp=$dstdir/#inst.$$#
+
+# Move or copy the file name to the temp name
+
+	$doit $instcmd $src $dsttmp &&
+
+	trap "rm -f ${dsttmp}" 0 &&
+
+# and set any options; do chmod last to preserve setuid bits
+
+# If any of these fail, we abort the whole thing.  If we want to
+# ignore errors from any of these, just make sure not to ignore
+# errors from the above "$doit $instcmd $src $dsttmp" command.
+
+	if [ x"$chowncmd" != x ]; then $doit $chowncmd $dsttmp; else true;fi &&
+	if [ x"$chgrpcmd" != x ]; then $doit $chgrpcmd $dsttmp; else true;fi &&
+	if [ x"$stripcmd" != x ]; then $doit $stripcmd $dsttmp; else true;fi &&
+	if [ x"$chmodcmd" != x ]; then $doit $chmodcmd $dsttmp; else true;fi &&
+
+# Now rename the file to the real destination.
+
+	$doit $rmcmd -f $dstdir/$dstfile
+	([ -f $dstdir/$dstfile ] &&
+	 $doit $mvcmd $dstdir/$dstfile $dstdir/$dstfile.$$ );
+	exec $doit $mvcmd $dsttmp $dstdir/$dstfile 
+
+fi &&
+
+
+exit 0

winsup/mingw/mkinstalldirs

@@ -0,0 +1,36 @@
+#! /bin/sh
+# mkinstalldirs --- make directory hierarchy
+# Author: Noah Friedman <friedman@prep.ai.mit.edu>
+# Created: 1993-05-16
+# Last modified: 1994-03-25
+# Public domain
+
+errstatus=0
+
+for file in ${1+"$@"} ; do 
+   set fnord `echo ":$file" | sed -ne 's/^:\//#/;s/^://;s/\// /g;s/^#/\//;p'`
+   shift
+
+   pathcomp=
+   for d in ${1+"$@"} ; do
+     pathcomp="$pathcomp$d"
+     case "$pathcomp" in
+       -* ) pathcomp=./$pathcomp ;;
+     esac
+
+     if test ! -d "$pathcomp"; then
+        echo "mkdir $pathcomp" 1>&2
+        mkdir "$pathcomp" > /dev/null 2>&1 || lasterr=$?
+     fi
+
+     if test ! -d "$pathcomp"; then
+	errstatus=$lasterr
+     fi
+
+     pathcomp="$pathcomp/"
+   done
+done
+
+exit $errstatus
+
+# mkinstalldirs ends here

winsup/mingw/profile/ChangeLog

@@ -1,25 +0,0 @@
-Thu Nov 18 00:20:00 1999  Mumit Khan  <khan@xraylith.wisc.edu>
-
-	* profil.c (profile_on): Set the profiler thread priority to
-	be time critical. Thanks to Pascal Obry <pascal_obry@csi.com>.
-
-Sun Nov  7 04:17:27 1999  Mumit Khan  <khan@xraylith.wisc.edu>
-
-	* Makefile.in (install): Fix target.
-
-Thu Nov  4 14:06:21 1999  Mumit Khan  <khan@xraylith.wisc.edu>
-
-	* Makefile.in: New file.
-	* configure.in: New file.
-	* configure: Generate.
-
-	* gcrt0.c (u_char, u_short, u_int, u_long): typedef for Mingw.
-	* gmon.h (u_char, u_short, u_int, u_long): Likewise.
-	* gmon.c (unistd.h): Include conditionally.
-	(sys/param.h): Likewise.
-	* mcount.c (sys/param.h): Likewise.
-	* profil.c (profile_on): thread id is DWORD, not int.
-
-	* Imported profiling sources from winsup-19991026 snapshot.
-
-

winsup/mingw/profile/Makefile.in

@@ -25,6 +25,8 @@ INSTALL = @INSTALL@
 INSTALL_DATA = @INSTALL_DATA@
 INSTALL_PROGRAM = @INSTALL_PROGRAM@
 mkinstalldirs = $(SHELL) $(srcdir)/../../mkinstalldirs
+DISTFILES = Makefile.in configure configure.in gcrt0.c gmon.c gmon.h mcount.c \
+profil.c profil.h profile.h
 
 CC = @CC@
 # FIXME: Which is it, CC or CC_FOR_TARGET?
@@ -117,3 +119,9 @@ distclean:
 .c.o:
 	$(CC) -c $(ALL_CPPFLAGS) $(ALL_CFLAGS) $< -o $@
 
+dist:
+	mkdir $(distdir)/profile
+	chmod 755 $(distdir)/profile
+	@for i in $(DISTFILES); do\
+		cp -p $(srcdir)/$$i $(distdir)/profile/$$i ; \
+	done

winsup/mingw/profile/gmon.h

@@ -51,13 +51,14 @@
 #include <profile.h>
 
 #ifdef __MINGW32__
-#if !defined _BSDTYPES_DEFINED
+#ifndef _BSDTYPES_DEFINED
 typedef unsigned char u_char;
 typedef unsigned short u_short;
 typedef unsigned int u_int;
 typedef unsigned long u_long;
 #define _BSDTYPES_DEFINED
-#endif
+#endif /* _BSDTYPES_DEFINED */
+#endif /* __MINGW32__*/
 
 /*
  * Structure prepended to gmon.out profiling data file.