diff --git a/newlib/ChangeLog b/newlib/ChangeLog
index 39e56728d..170647a35 100644
--- a/newlib/ChangeLog
+++ b/newlib/ChangeLog
@@ -1,3 +1,19 @@
+2002-08-27  Jeff Johnston  <jjohnstn@redhat.com>
+
+	* Makefile.am(stmp-targ-include): Copy newlib.h to targ-include.
+	(install-data-local): Install newlib.h.
+	* Makefile.in: Regenerated.
+	* aclocal.m4: Ditto.
+	* configure: Ditto.
+	* configure.in: Add AM_CONFIG_HEADER to generate newlib.h based on 
+	newlib.hin.  Add AC_DEFINE_UNQUOTED entries for _ELIX_LEVEL
+	and _NEWLIB_VERSION to fill in newlib.h header file entries.
+	In AC_OUTPUT statement, unset ac_file so multilib support does
+	not use last ac_file temporary used in newlib.h configuration.
+	* libc/include/_ansi.h: Include <newlib.h>.
+	* newlib.hin: New template file for newlib.h.
+	* stamp-h.in: New file.
+
 2002-08-26  Wu Yongwei <adah@netstd.com>
 
         * time.h (timezonevar): Change "#if" to "#ifdef".
diff --git a/newlib/Makefile.am b/newlib/Makefile.am
index 8a82ec90a..801a90e97 100644
--- a/newlib/Makefile.am
+++ b/newlib/Makefile.am
@@ -189,6 +189,7 @@ all-recursive: stmp-targ-include
 stmp-targ-include: config.status
 	-rm -rf targ-include stmp-targ-include
 	mkdir targ-include targ-include/sys targ-include/machine
+	cp newlib.h targ-include/newlib.h
 	-for i in $(srcdir)/libc/machine/$(machine_dir)/machine/*.h; do \
 	    if [ -f $$i ]; then \
 	      cp $$i targ-include/machine/`basename $$i`; \
@@ -227,6 +228,7 @@ endif
 	$(MULTIDO) $(AM_MAKEFLAGS) DO=install multi-do
 	-if [ -z "$(MULTISUBDIR)" ]; then \
 	  $(mkinstalldirs) $(DESTDIR)$(tooldir)/include; \
+	  $(INSTALL_DATA) newlib.h $(DESTDIR)$(tooldir)/include/newlib.h; \
 	  for i in $(srcdir)/libc/include/*.h; do \
 	   $(INSTALL_DATA) $$i $(DESTDIR)$(tooldir)/include/`basename $$i`; \
 	  done; \
diff --git a/newlib/Makefile.in b/newlib/Makefile.in
index f1aafa8f6..2febe73f5 100644
--- a/newlib/Makefile.in
+++ b/newlib/Makefile.in
@@ -246,11 +246,12 @@ MAKEOVERRIDES =
 RUNTESTFLAGS = 
 ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
 mkinstalldirs = $(SHELL) $(top_srcdir)/../mkinstalldirs
+CONFIG_HEADER = newlib.h
 CONFIG_CLEAN_FILES = 
 LIBRARIES =  $(toollib_LIBRARIES)
 
 
-DEFS = @DEFS@ -I. -I$(srcdir) 
+DEFS = @DEFS@ -I. -I$(srcdir) -I.
 CPPFLAGS = @CPPFLAGS@
 LIBS = @LIBS@
 libm_a_LIBADD = 
@@ -272,8 +273,8 @@ CCLD = $(CC)
 LINK = $(LIBTOOL) --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(LDFLAGS) -o $@
 DATA =  $(noinst_DATA) $(toollib_DATA)
 
-DIST_COMMON =  README ChangeLog Makefile.am Makefile.in NEWS \
-acinclude.m4 aclocal.m4 configure configure.in
+DIST_COMMON =  README ./stamp-h.in ChangeLog Makefile.am Makefile.in \
+NEWS acinclude.m4 aclocal.m4 configure configure.in newlib.hin
 
 
 DISTFILES = $(DIST_COMMON) $(SOURCES) $(HEADERS) $(TEXINFOS) $(EXTRA_DIST)
@@ -304,6 +305,34 @@ config.status: $(srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
 $(srcdir)/configure: @MAINTAINER_MODE_TRUE@$(srcdir)/configure.in $(ACLOCAL_M4) $(CONFIGURE_DEPENDENCIES)
 	cd $(srcdir) && $(AUTOCONF)
 
+newlib.h: stamp-h
+	@if test ! -f $@; then \
+		rm -f stamp-h; \
+		$(MAKE) stamp-h; \
+	else :; fi
+stamp-h: $(srcdir)/newlib.hin $(top_builddir)/config.status
+	cd $(top_builddir) \
+	  && CONFIG_FILES= CONFIG_HEADERS=newlib.h:newlib.hin \
+	     $(SHELL) ./config.status
+	@echo timestamp > stamp-h 2> /dev/null
+$(srcdir)/newlib.hin: @MAINTAINER_MODE_TRUE@$(srcdir)/stamp-h.in
+	@if test ! -f $@; then \
+		rm -f $(srcdir)/stamp-h.in; \
+		$(MAKE) $(srcdir)/stamp-h.in; \
+	else :; fi
+$(srcdir)/stamp-h.in: $(top_srcdir)/configure.in $(ACLOCAL_M4) 
+	cd $(top_srcdir) && $(AUTOHEADER)
+	@echo timestamp > $(srcdir)/stamp-h.in 2> /dev/null
+
+mostlyclean-hdr:
+
+clean-hdr:
+
+distclean-hdr:
+	-rm -f newlib.h
+
+maintainer-clean-hdr:
+
 mostlyclean-toollibLIBRARIES:
 
 clean-toollibLIBRARIES:
@@ -495,7 +524,7 @@ ID: $(HEADERS) $(SOURCES) $(LISP)
 	here=`pwd` && cd $(srcdir) \
 	  && mkid -f$$here/ID $$unique $(LISP)
 
-TAGS: tags-recursive $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) $(LISP)
+TAGS: tags-recursive $(HEADERS) $(SOURCES) newlib.hin $(TAGS_DEPENDENCIES) $(LISP)
 	tags=; \
 	here=`pwd`; \
 	list='$(SUBDIRS)'; for subdir in $$list; do \
@@ -507,8 +536,8 @@ TAGS: tags-recursive $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) $(LISP)
 	unique=`for i in $$list; do echo $$i; done | \
 	  awk '    { files[$$0] = 1; } \
 	       END { for (i in files) print i; }'`; \
-	test -z "$(ETAGS_ARGS)$$unique$(LISP)$$tags" \
-	  || (cd $(srcdir) && etags $(ETAGS_ARGS) $$tags  $$unique $(LISP) -o $$here/TAGS)
+	test -z "$(ETAGS_ARGS)newlib.hin$$unique$(LISP)$$tags" \
+	  || (cd $(srcdir) && etags $(ETAGS_ARGS) $$tags newlib.hin $$unique $(LISP) -o $$here/TAGS)
 
 mostlyclean-tags:
 
@@ -592,6 +621,9 @@ installcheck-am:
 installcheck: installcheck-recursive
 install-info-am: 
 install-info: install-info-recursive
+all-recursive-am: newlib.h
+	$(MAKE) $(AM_MAKEFLAGS) all-recursive
+
 install-exec-am:
 install-exec: install-exec-recursive
 
@@ -605,8 +637,8 @@ install: install-recursive
 uninstall-am: uninstall-toollibLIBRARIES uninstall-toollibLTLIBRARIES \
 		uninstall-toollibDATA
 uninstall: uninstall-recursive
-all-am: Makefile $(LIBRARIES) $(LTLIBRARIES) $(DATA)
-all-redirect: all-recursive
+all-am: Makefile $(LIBRARIES) $(LTLIBRARIES) $(DATA) newlib.h
+all-redirect: all-recursive-am
 install-strip:
 	$(MAKE) $(AM_MAKEFLAGS) AM_INSTALL_PROGRAM_FLAGS=-s install
 installdirs: installdirs-recursive
@@ -625,27 +657,30 @@ distclean-generic:
 	-rm -f config.cache config.log stamp-h stamp-h[0-9]*
 
 maintainer-clean-generic:
-mostlyclean-am:  mostlyclean-toollibLIBRARIES mostlyclean-compile \
-		mostlyclean-libtool mostlyclean-toollibLTLIBRARIES \
-		mostlyclean-tags mostlyclean-generic
+mostlyclean-am:  mostlyclean-hdr mostlyclean-toollibLIBRARIES \
+		mostlyclean-compile mostlyclean-libtool \
+		mostlyclean-toollibLTLIBRARIES mostlyclean-tags \
+		mostlyclean-generic
 
 mostlyclean: mostlyclean-recursive
 
-clean-am:  clean-toollibLIBRARIES clean-compile clean-libtool \
+clean-am:  clean-hdr clean-toollibLIBRARIES clean-compile clean-libtool \
 		clean-toollibLTLIBRARIES clean-tags clean-generic \
 		mostlyclean-am
 
 clean: clean-recursive
 
-distclean-am:  distclean-toollibLIBRARIES distclean-compile \
-		distclean-libtool distclean-toollibLTLIBRARIES \
-		distclean-tags distclean-generic clean-am
+distclean-am:  distclean-hdr distclean-toollibLIBRARIES \
+		distclean-compile distclean-libtool \
+		distclean-toollibLTLIBRARIES distclean-tags \
+		distclean-generic clean-am
 	-rm -f libtool
 
 distclean: distclean-recursive
 	-rm -f config.status
 
-maintainer-clean-am:  maintainer-clean-toollibLIBRARIES \
+maintainer-clean-am:  maintainer-clean-hdr \
+		maintainer-clean-toollibLIBRARIES \
 		maintainer-clean-compile maintainer-clean-libtool \
 		maintainer-clean-toollibLTLIBRARIES \
 		maintainer-clean-tags maintainer-clean-generic \
@@ -656,7 +691,8 @@ maintainer-clean-am:  maintainer-clean-toollibLIBRARIES \
 maintainer-clean: maintainer-clean-recursive
 	-rm -f config.status
 
-.PHONY: mostlyclean-toollibLIBRARIES distclean-toollibLIBRARIES \
+.PHONY: mostlyclean-hdr distclean-hdr clean-hdr maintainer-clean-hdr \
+mostlyclean-toollibLIBRARIES distclean-toollibLIBRARIES \
 clean-toollibLIBRARIES maintainer-clean-toollibLIBRARIES \
 uninstall-toollibLIBRARIES install-toollibLIBRARIES mostlyclean-compile \
 distclean-compile clean-compile maintainer-clean-compile \
@@ -672,9 +708,9 @@ dvi-recursive mostlyclean-recursive distclean-recursive clean-recursive \
 maintainer-clean-recursive tags tags-recursive mostlyclean-tags \
 distclean-tags clean-tags maintainer-clean-tags distdir check-DEJAGNU \
 info-am info dvi-am dvi check check-am installcheck-am installcheck \
-install-info-am install-info install-exec-am install-exec \
-install-data-local install-data-am install-data install-am install \
-uninstall-am uninstall all-redirect all-am all installdirs-am \
+install-info-am install-info all-recursive-am install-exec-am \
+install-exec install-data-local install-data-am install-data install-am \
+install uninstall-am uninstall all-redirect all-am all installdirs-am \
 installdirs mostlyclean-generic distclean-generic clean-generic \
 maintainer-clean-generic clean mostlyclean distclean maintainer-clean
 
@@ -728,6 +764,7 @@ all-recursive: stmp-targ-include
 stmp-targ-include: config.status
 	-rm -rf targ-include stmp-targ-include
 	mkdir targ-include targ-include/sys targ-include/machine
+	cp newlib.h targ-include/newlib.h
 	-for i in $(srcdir)/libc/machine/$(machine_dir)/machine/*.h; do \
 	    if [ -f $$i ]; then \
 	      cp $$i targ-include/machine/`basename $$i`; \
@@ -761,6 +798,7 @@ install-data-local:	install-toollibLIBRARIES
 	$(MULTIDO) $(AM_MAKEFLAGS) DO=install multi-do
 	-if [ -z "$(MULTISUBDIR)" ]; then \
 	  $(mkinstalldirs) $(DESTDIR)$(tooldir)/include; \
+	  $(INSTALL_DATA) newlib.h $(DESTDIR)$(tooldir)/include/newlib.h; \
 	  for i in $(srcdir)/libc/include/*.h; do \
 	   $(INSTALL_DATA) $$i $(DESTDIR)$(tooldir)/include/`basename $$i`; \
 	  done; \
diff --git a/newlib/aclocal.m4 b/newlib/aclocal.m4
index eae4b2000..a0a5d0eec 100644
--- a/newlib/aclocal.m4
+++ b/newlib/aclocal.m4
@@ -322,6 +322,29 @@ else
   $1_FALSE=
 fi])
 
+# Like AC_CONFIG_HEADER, but automatically create stamp file.
+
+AC_DEFUN(AM_CONFIG_HEADER,
+[AC_PREREQ([2.12])
+AC_CONFIG_HEADER([$1])
+dnl When config.status generates a header, we must update the stamp-h file.
+dnl This file resides in the same directory as the config header
+dnl that is generated.  We must strip everything past the first ":",
+dnl and everything past the last "/".
+AC_OUTPUT_COMMANDS(changequote(<<,>>)dnl
+ifelse(patsubst(<<$1>>, <<[^ ]>>, <<>>), <<>>,
+<<test -z "<<$>>CONFIG_HEADERS" || echo timestamp > patsubst(<<$1>>, <<^\([^:]*/\)?.*>>, <<\1>>)stamp-h<<>>dnl>>,
+<<am_indx=1
+for am_file in <<$1>>; do
+  case " <<$>>CONFIG_HEADERS " in
+  *" <<$>>am_file "*<<)>>
+    echo timestamp > `echo <<$>>am_file | sed -e 's%:.*%%' -e 's%[^/]*$%%'`stamp-h$am_indx
+    ;;
+  esac
+  am_indx=`expr "<<$>>am_indx" + 1`
+done<<>>dnl>>)
+changequote([,]))])
+
 
 # serial 46 AC_PROG_LIBTOOL
 AC_DEFUN([AC_PROG_LIBTOOL],
diff --git a/newlib/configure b/newlib/configure
index 93db89329..919081435 100755
--- a/newlib/configure
+++ b/newlib/configure
@@ -566,6 +566,9 @@ fi
 
 
 
+
+
+
 ac_aux_dir=
 for ac_dir in .. $srcdir/..; do
   if test -f $ac_dir/install-sh; then
@@ -598,7 +601,6 @@ else
   newlib_io_pos_args=no
 fi
 
-
 # Find a good install program.  We prefer a C program (faster),
 # so one script is as good as another.  But avoid the broken or
 # incompatible versions:
@@ -611,7 +613,7 @@ fi
 # SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff"
 # ./install, which can be erroneously created by make from ./install.sh.
 echo $ac_n "checking for a BSD compatible install""... $ac_c" 1>&6
-echo "configure:615: checking for a BSD compatible install" >&5
+echo "configure:617: checking for a BSD compatible install" >&5
 if test -z "$INSTALL"; then
 if eval "test \"`echo '$''{'ac_cv_path_install'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
@@ -664,7 +666,7 @@ test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL_PROGRAM}'
 test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644'
 
 echo $ac_n "checking whether build environment is sane""... $ac_c" 1>&6
-echo "configure:668: checking whether build environment is sane" >&5
+echo "configure:670: checking whether build environment is sane" >&5
 # Just in case
 sleep 1
 echo timestamp > conftestfile
@@ -721,7 +723,7 @@ test "$program_suffix" != NONE &&
 test "$program_transform_name" = "" && program_transform_name="s,x,x,"
 
 echo $ac_n "checking whether ${MAKE-make} sets \${MAKE}""... $ac_c" 1>&6
-echo "configure:725: checking whether ${MAKE-make} sets \${MAKE}" >&5
+echo "configure:727: checking whether ${MAKE-make} sets \${MAKE}" >&5
 set dummy ${MAKE-make}; ac_make=`echo "$2" | sed 'y%./+-%__p_%'`
 if eval "test \"`echo '$''{'ac_cv_prog_make_${ac_make}_set'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
@@ -754,12 +756,12 @@ else
 fi
 
 echo $ac_n "checking for Cygwin environment""... $ac_c" 1>&6
-echo "configure:758: checking for Cygwin environment" >&5
+echo "configure:760: checking for Cygwin environment" >&5
 if eval "test \"`echo '$''{'ac_cv_cygwin'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 763 "configure"
+#line 765 "configure"
 #include "confdefs.h"
 
 int main() {
@@ -770,7 +772,7 @@ int main() {
 return __CYGWIN__;
 ; return 0; }
 EOF
-if { (eval echo configure:774: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:776: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
   rm -rf conftest*
   ac_cv_cygwin=yes
 else
@@ -787,19 +789,19 @@ echo "$ac_t""$ac_cv_cygwin" 1>&6
 CYGWIN=
 test "$ac_cv_cygwin" = yes && CYGWIN=yes
 echo $ac_n "checking for mingw32 environment""... $ac_c" 1>&6
-echo "configure:791: checking for mingw32 environment" >&5
+echo "configure:793: checking for mingw32 environment" >&5
 if eval "test \"`echo '$''{'ac_cv_mingw32'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 796 "configure"
+#line 798 "configure"
 #include "confdefs.h"
 
 int main() {
 return __MINGW32__;
 ; return 0; }
 EOF
-if { (eval echo configure:803: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:805: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
   rm -rf conftest*
   ac_cv_mingw32=yes
 else
@@ -946,7 +948,7 @@ else { echo "configure: error: can not run $ac_config_sub" 1>&2; exit 1; }
 fi
 
 echo $ac_n "checking host system type""... $ac_c" 1>&6
-echo "configure:950: checking host system type" >&5
+echo "configure:952: checking host system type" >&5
 
 host_alias=$host
 case "$host_alias" in
@@ -967,7 +969,7 @@ host_os=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
 echo "$ac_t""$host" 1>&6
 
 echo $ac_n "checking target system type""... $ac_c" 1>&6
-echo "configure:971: checking target system type" >&5
+echo "configure:973: checking target system type" >&5
 
 target_alias=$target
 case "$target_alias" in
@@ -985,7 +987,7 @@ target_os=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
 echo "$ac_t""$target" 1>&6
 
 echo $ac_n "checking build system type""... $ac_c" 1>&6
-echo "configure:989: checking build system type" >&5
+echo "configure:991: checking build system type" >&5
 
 build_alias=$build
 case "$build_alias" in
@@ -1028,7 +1030,7 @@ EOF
 
 missing_dir=`cd $ac_aux_dir && pwd`
 echo $ac_n "checking for working aclocal""... $ac_c" 1>&6
-echo "configure:1032: checking for working aclocal" >&5
+echo "configure:1034: checking for working aclocal" >&5
 # Run test in a subshell; some versions of sh will print an error if
 # an executable is not found, even if stderr is redirected.
 # Redirect stdin to placate older versions of autoconf.  Sigh.
@@ -1041,7 +1043,7 @@ else
 fi
 
 echo $ac_n "checking for working autoconf""... $ac_c" 1>&6
-echo "configure:1045: checking for working autoconf" >&5
+echo "configure:1047: checking for working autoconf" >&5
 # Run test in a subshell; some versions of sh will print an error if
 # an executable is not found, even if stderr is redirected.
 # Redirect stdin to placate older versions of autoconf.  Sigh.
@@ -1054,7 +1056,7 @@ else
 fi
 
 echo $ac_n "checking for working automake""... $ac_c" 1>&6
-echo "configure:1058: checking for working automake" >&5
+echo "configure:1060: checking for working automake" >&5
 # Run test in a subshell; some versions of sh will print an error if
 # an executable is not found, even if stderr is redirected.
 # Redirect stdin to placate older versions of autoconf.  Sigh.
@@ -1067,7 +1069,7 @@ else
 fi
 
 echo $ac_n "checking for working autoheader""... $ac_c" 1>&6
-echo "configure:1071: checking for working autoheader" >&5
+echo "configure:1073: checking for working autoheader" >&5
 # Run test in a subshell; some versions of sh will print an error if
 # an executable is not found, even if stderr is redirected.
 # Redirect stdin to placate older versions of autoconf.  Sigh.
@@ -1080,7 +1082,7 @@ else
 fi
 
 echo $ac_n "checking for working makeinfo""... $ac_c" 1>&6
-echo "configure:1084: checking for working makeinfo" >&5
+echo "configure:1086: checking for working makeinfo" >&5
 # Run test in a subshell; some versions of sh will print an error if
 # an executable is not found, even if stderr is redirected.
 # Redirect stdin to placate older versions of autoconf.  Sigh.
@@ -1105,7 +1107,7 @@ fi
 # Extract the first word of "gcc", so it can be a program name with args.
 set dummy gcc; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1109: checking for $ac_word" >&5
+echo "configure:1111: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -1135,7 +1137,7 @@ if test -z "$CC"; then
   # Extract the first word of "cc", so it can be a program name with args.
 set dummy cc; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1139: checking for $ac_word" >&5
+echo "configure:1141: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -1184,7 +1186,7 @@ fi
 fi
 
 echo $ac_n "checking whether we are using GNU C""... $ac_c" 1>&6
-echo "configure:1188: checking whether we are using GNU C" >&5
+echo "configure:1190: checking whether we are using GNU C" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_gcc'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -1193,7 +1195,7 @@ else
   yes;
 #endif
 EOF
-if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:1197: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
+if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:1199: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
   ac_cv_prog_gcc=yes
 else
   ac_cv_prog_gcc=no
@@ -1208,7 +1210,7 @@ if test $ac_cv_prog_gcc = yes; then
   ac_save_CFLAGS="$CFLAGS"
   CFLAGS=
   echo $ac_n "checking whether ${CC-cc} accepts -g""... $ac_c" 1>&6
-echo "configure:1212: checking whether ${CC-cc} accepts -g" >&5
+echo "configure:1214: checking whether ${CC-cc} accepts -g" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_cc_g'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -1239,7 +1241,7 @@ fi
 # Extract the first word of "${ac_tool_prefix}as", so it can be a program name with args.
 set dummy ${ac_tool_prefix}as; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1243: checking for $ac_word" >&5
+echo "configure:1245: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_AS'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -1271,7 +1273,7 @@ fi
 # Extract the first word of "${ac_tool_prefix}ar", so it can be a program name with args.
 set dummy ${ac_tool_prefix}ar; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1275: checking for $ac_word" >&5
+echo "configure:1277: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_AR'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -1303,7 +1305,7 @@ fi
 # Extract the first word of "${ac_tool_prefix}ranlib", so it can be a program name with args.
 set dummy ${ac_tool_prefix}ranlib; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1307: checking for $ac_word" >&5
+echo "configure:1309: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -1335,7 +1337,7 @@ if test -n "$ac_tool_prefix"; then
   # Extract the first word of "ranlib", so it can be a program name with args.
 set dummy ranlib; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1339: checking for $ac_word" >&5
+echo "configure:1341: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -1380,7 +1382,7 @@ fi
 # SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff"
 # ./install, which can be erroneously created by make from ./install.sh.
 echo $ac_n "checking for a BSD compatible install""... $ac_c" 1>&6
-echo "configure:1384: checking for a BSD compatible install" >&5
+echo "configure:1386: checking for a BSD compatible install" >&5
 if test -z "$INSTALL"; then
 if eval "test \"`echo '$''{'ac_cv_path_install'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
@@ -1434,7 +1436,7 @@ test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644'
 
 
 echo $ac_n "checking whether to enable maintainer-specific portions of Makefiles""... $ac_c" 1>&6
-echo "configure:1438: checking whether to enable maintainer-specific portions of Makefiles" >&5
+echo "configure:1440: checking whether to enable maintainer-specific portions of Makefiles" >&5
     # Check whether --enable-maintainer-mode or --disable-maintainer-mode was given.
 if test "${enable_maintainer_mode+set}" = set; then
   enableval="$enable_maintainer_mode"
@@ -1468,7 +1470,7 @@ if false; then
   
 
 echo $ac_n "checking for executable suffix""... $ac_c" 1>&6
-echo "configure:1472: checking for executable suffix" >&5
+echo "configure:1474: checking for executable suffix" >&5
 if eval "test \"`echo '$''{'ac_cv_exeext'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -1478,7 +1480,7 @@ else
   rm -f conftest*
   echo 'int main () { return 0; }' > conftest.$ac_ext
   ac_cv_exeext=
-  if { (eval echo configure:1482: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; }; then
+  if { (eval echo configure:1484: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; }; then
     for file in conftest.*; do
       case $file in
       *.c | *.o | *.obj | *.ilk | *.pdb) ;;
@@ -1653,7 +1655,7 @@ fi
 # Extract the first word of "gcc", so it can be a program name with args.
 set dummy gcc; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1657: checking for $ac_word" >&5
+echo "configure:1659: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -1683,7 +1685,7 @@ if test -z "$CC"; then
   # Extract the first word of "cc", so it can be a program name with args.
 set dummy cc; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1687: checking for $ac_word" >&5
+echo "configure:1689: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -1734,7 +1736,7 @@ fi
       # Extract the first word of "cl", so it can be a program name with args.
 set dummy cl; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1738: checking for $ac_word" >&5
+echo "configure:1740: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -1766,7 +1768,7 @@ fi
 fi
 
 echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works""... $ac_c" 1>&6
-echo "configure:1770: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works" >&5
+echo "configure:1772: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works" >&5
 
 ac_ext=c
 # CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
@@ -1777,12 +1779,12 @@ cross_compiling=$ac_cv_prog_cc_cross
 
 cat > conftest.$ac_ext << EOF
 
-#line 1781 "configure"
+#line 1783 "configure"
 #include "confdefs.h"
 
 main(){return(0);}
 EOF
-if { (eval echo configure:1786: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:1788: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
   ac_cv_prog_cc_works=yes
   # If we can't run a trivial program, we are probably using a cross compiler.
   if (./conftest; exit) 2>/dev/null; then
@@ -1808,12 +1810,12 @@ if test $ac_cv_prog_cc_works = no; then
   { echo "configure: error: installation or configuration problem: C compiler cannot create executables." 1>&2; exit 1; }
 fi
 echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler""... $ac_c" 1>&6
-echo "configure:1812: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler" >&5
+echo "configure:1814: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler" >&5
 echo "$ac_t""$ac_cv_prog_cc_cross" 1>&6
 cross_compiling=$ac_cv_prog_cc_cross
 
 echo $ac_n "checking whether we are using GNU C""... $ac_c" 1>&6
-echo "configure:1817: checking whether we are using GNU C" >&5
+echo "configure:1819: checking whether we are using GNU C" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_gcc'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -1822,7 +1824,7 @@ else
   yes;
 #endif
 EOF
-if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:1826: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
+if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:1828: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
   ac_cv_prog_gcc=yes
 else
   ac_cv_prog_gcc=no
@@ -1841,7 +1843,7 @@ ac_test_CFLAGS="${CFLAGS+set}"
 ac_save_CFLAGS="$CFLAGS"
 CFLAGS=
 echo $ac_n "checking whether ${CC-cc} accepts -g""... $ac_c" 1>&6
-echo "configure:1845: checking whether ${CC-cc} accepts -g" >&5
+echo "configure:1847: checking whether ${CC-cc} accepts -g" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_cc_g'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -1884,7 +1886,7 @@ ac_prog=ld
 if test "$GCC" = yes; then
   # Check if gcc -print-prog-name=ld gives a path.
   echo $ac_n "checking for ld used by GCC""... $ac_c" 1>&6
-echo "configure:1888: checking for ld used by GCC" >&5
+echo "configure:1890: checking for ld used by GCC" >&5
   case $host in
   *-*-mingw*)
     # gcc leaves a trailing carriage return which upsets mingw
@@ -1914,10 +1916,10 @@ echo "configure:1888: checking for ld used by GCC" >&5
   esac
 elif test "$with_gnu_ld" = yes; then
   echo $ac_n "checking for GNU ld""... $ac_c" 1>&6
-echo "configure:1918: checking for GNU ld" >&5
+echo "configure:1920: checking for GNU ld" >&5
 else
   echo $ac_n "checking for non-GNU ld""... $ac_c" 1>&6
-echo "configure:1921: checking for non-GNU ld" >&5
+echo "configure:1923: checking for non-GNU ld" >&5
 fi
 if eval "test \"`echo '$''{'lt_cv_path_LD'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
@@ -1952,7 +1954,7 @@ else
 fi
 test -z "$LD" && { echo "configure: error: no acceptable ld found in \$PATH" 1>&2; exit 1; }
 echo $ac_n "checking if the linker ($LD) is GNU ld""... $ac_c" 1>&6
-echo "configure:1956: checking if the linker ($LD) is GNU ld" >&5
+echo "configure:1958: checking if the linker ($LD) is GNU ld" >&5
 if eval "test \"`echo '$''{'lt_cv_prog_gnu_ld'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -1969,7 +1971,7 @@ with_gnu_ld=$lt_cv_prog_gnu_ld
 
 
 echo $ac_n "checking for $LD option to reload object files""... $ac_c" 1>&6
-echo "configure:1973: checking for $LD option to reload object files" >&5
+echo "configure:1975: checking for $LD option to reload object files" >&5
 if eval "test \"`echo '$''{'lt_cv_ld_reload_flag'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -1981,7 +1983,7 @@ reload_flag=$lt_cv_ld_reload_flag
 test -n "$reload_flag" && reload_flag=" $reload_flag"
 
 echo $ac_n "checking for BSD-compatible nm""... $ac_c" 1>&6
-echo "configure:1985: checking for BSD-compatible nm" >&5
+echo "configure:1987: checking for BSD-compatible nm" >&5
 if eval "test \"`echo '$''{'lt_cv_path_NM'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -2019,7 +2021,7 @@ NM="$lt_cv_path_NM"
 echo "$ac_t""$NM" 1>&6
 
 echo $ac_n "checking whether ln -s works""... $ac_c" 1>&6
-echo "configure:2023: checking whether ln -s works" >&5
+echo "configure:2025: checking whether ln -s works" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_LN_S'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -2040,7 +2042,7 @@ else
 fi
 
 echo $ac_n "checking how to recognise dependant libraries""... $ac_c" 1>&6
-echo "configure:2044: checking how to recognise dependant libraries" >&5
+echo "configure:2046: checking how to recognise dependant libraries" >&5
 if eval "test \"`echo '$''{'lt_cv_deplibs_check_method'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -2213,13 +2215,13 @@ file_magic_cmd=$lt_cv_file_magic_cmd
 deplibs_check_method=$lt_cv_deplibs_check_method
 
 echo $ac_n "checking for object suffix""... $ac_c" 1>&6
-echo "configure:2217: checking for object suffix" >&5
+echo "configure:2219: checking for object suffix" >&5
 if eval "test \"`echo '$''{'ac_cv_objext'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   rm -f conftest*
 echo 'int i = 1;' > conftest.$ac_ext
-if { (eval echo configure:2223: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:2225: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
   for ac_file in conftest.*; do
     case $ac_file in
     *.c) ;;
@@ -2243,7 +2245,7 @@ case $deplibs_check_method in
 file_magic*)
   if test "$file_magic_cmd" = '$MAGIC_CMD'; then
     echo $ac_n "checking for ${ac_tool_prefix}file""... $ac_c" 1>&6
-echo "configure:2247: checking for ${ac_tool_prefix}file" >&5
+echo "configure:2249: checking for ${ac_tool_prefix}file" >&5
 if eval "test \"`echo '$''{'lt_cv_path_MAGIC_CMD'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -2305,7 +2307,7 @@ fi
 if test -z "$lt_cv_path_MAGIC_CMD"; then
   if test -n "$ac_tool_prefix"; then
     echo $ac_n "checking for file""... $ac_c" 1>&6
-echo "configure:2309: checking for file" >&5
+echo "configure:2311: checking for file" >&5
 if eval "test \"`echo '$''{'lt_cv_path_MAGIC_CMD'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -2376,7 +2378,7 @@ esac
 # Extract the first word of "${ac_tool_prefix}ranlib", so it can be a program name with args.
 set dummy ${ac_tool_prefix}ranlib; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2380: checking for $ac_word" >&5
+echo "configure:2382: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -2408,7 +2410,7 @@ if test -n "$ac_tool_prefix"; then
   # Extract the first word of "ranlib", so it can be a program name with args.
 set dummy ranlib; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2412: checking for $ac_word" >&5
+echo "configure:2414: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -2443,7 +2445,7 @@ fi
 # Extract the first word of "${ac_tool_prefix}strip", so it can be a program name with args.
 set dummy ${ac_tool_prefix}strip; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2447: checking for $ac_word" >&5
+echo "configure:2449: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_STRIP'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -2475,7 +2477,7 @@ if test -n "$ac_tool_prefix"; then
   # Extract the first word of "strip", so it can be a program name with args.
 set dummy strip; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2479: checking for $ac_word" >&5
+echo "configure:2481: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_STRIP'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -2542,8 +2544,8 @@ test x"$pic_mode" = xno && libtool_flags="$libtool_flags --prefer-non-pic"
 case $host in
 *-*-irix6*)
   # Find out which ABI we are using.
-  echo '#line 2546 "configure"' > conftest.$ac_ext
-  if { (eval echo configure:2547: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+  echo '#line 2548 "configure"' > conftest.$ac_ext
+  if { (eval echo configure:2549: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
     case `/usr/bin/file conftest.$ac_objext` in
     *32-bit*)
       LD="${LD-ld} -32"
@@ -2562,7 +2564,7 @@ case $host in
 ia64-*-hpux*)
   # Find out which ABI we are using.
   echo 'int i;' > conftest.$ac_ext
-  if { (eval echo configure:2566: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+  if { (eval echo configure:2568: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
     case "`/usr/bin/file conftest.o`" in
     *ELF-32*)
       HPUX_IA64_MODE="32"
@@ -2580,7 +2582,7 @@ ia64-*-hpux*)
   SAVE_CFLAGS="$CFLAGS"
   CFLAGS="$CFLAGS -belf"
   echo $ac_n "checking whether the C compiler needs -belf""... $ac_c" 1>&6
-echo "configure:2584: checking whether the C compiler needs -belf" >&5
+echo "configure:2586: checking whether the C compiler needs -belf" >&5
 if eval "test \"`echo '$''{'lt_cv_cc_needs_belf'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -2593,14 +2595,14 @@ ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$a
 cross_compiling=$ac_cv_prog_cc_cross
 
      cat > conftest.$ac_ext <<EOF
-#line 2597 "configure"
+#line 2599 "configure"
 #include "confdefs.h"
 
 int main() {
 
 ; return 0; }
 EOF
-if { (eval echo configure:2604: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:2606: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
   rm -rf conftest*
   lt_cv_cc_needs_belf=yes
 else
@@ -2630,7 +2632,7 @@ echo "$ac_t""$lt_cv_cc_needs_belf" 1>&6
   # Extract the first word of "${ac_tool_prefix}dlltool", so it can be a program name with args.
 set dummy ${ac_tool_prefix}dlltool; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2634: checking for $ac_word" >&5
+echo "configure:2636: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_DLLTOOL'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -2662,7 +2664,7 @@ if test -n "$ac_tool_prefix"; then
   # Extract the first word of "dlltool", so it can be a program name with args.
 set dummy dlltool; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2666: checking for $ac_word" >&5
+echo "configure:2668: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_DLLTOOL'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -2697,7 +2699,7 @@ fi
   # Extract the first word of "${ac_tool_prefix}as", so it can be a program name with args.
 set dummy ${ac_tool_prefix}as; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2701: checking for $ac_word" >&5
+echo "configure:2703: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_AS'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -2729,7 +2731,7 @@ if test -n "$ac_tool_prefix"; then
   # Extract the first word of "as", so it can be a program name with args.
 set dummy as; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2733: checking for $ac_word" >&5
+echo "configure:2735: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_AS'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -2764,7 +2766,7 @@ fi
   # Extract the first word of "${ac_tool_prefix}objdump", so it can be a program name with args.
 set dummy ${ac_tool_prefix}objdump; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2768: checking for $ac_word" >&5
+echo "configure:2770: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_OBJDUMP'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -2796,7 +2798,7 @@ if test -n "$ac_tool_prefix"; then
   # Extract the first word of "objdump", so it can be a program name with args.
 set dummy objdump; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2800: checking for $ac_word" >&5
+echo "configure:2802: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_OBJDUMP'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -2832,12 +2834,12 @@ fi
   # recent cygwin and mingw systems supply a stub DllMain which the user
   # can override, but on older systems we have to supply one
   echo $ac_n "checking if libtool should supply DllMain function""... $ac_c" 1>&6
-echo "configure:2836: checking if libtool should supply DllMain function" >&5
+echo "configure:2838: checking if libtool should supply DllMain function" >&5
 if eval "test \"`echo '$''{'lt_cv_need_dllmain'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 2841 "configure"
+#line 2843 "configure"
 #include "confdefs.h"
 
 int main() {
@@ -2845,7 +2847,7 @@ extern int __attribute__((__stdcall__)) DllMain(void*, int, void*);
       DllMain (0, 0, 0);
 ; return 0; }
 EOF
-if { (eval echo configure:2849: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:2851: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
   rm -rf conftest*
   lt_cv_need_dllmain=no
 else
@@ -2866,19 +2868,19 @@ echo "$ac_t""$lt_cv_need_dllmain" 1>&6
     SAVE_CFLAGS="$CFLAGS"
     CFLAGS="$CFLAGS -mdll"
     echo $ac_n "checking how to link DLLs""... $ac_c" 1>&6
-echo "configure:2870: checking how to link DLLs" >&5
+echo "configure:2872: checking how to link DLLs" >&5
 if eval "test \"`echo '$''{'lt_cv_cc_dll_switch'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 2875 "configure"
+#line 2877 "configure"
 #include "confdefs.h"
 
 int main() {
 
 ; return 0; }
 EOF
-if { (eval echo configure:2882: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:2884: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
   rm -rf conftest*
   lt_cv_cc_dll_switch=-mdll
 else
@@ -2992,7 +2994,7 @@ do
 # Extract the first word of "$ac_prog", so it can be a program name with args.
 set dummy $ac_prog; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2996: checking for $ac_word" >&5
+echo "configure:2998: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_AWK'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -3143,6 +3145,17 @@ if test -z "$CC_FOR_BUILD"; then
 fi
 
 
+if test "${newlib_elix_level}" -gt "0"; then
+cat >> confdefs.h <<EOF
+#define _ELIX_LEVEL ${newlib_elix_level}
+EOF
+
+fi
+
+cat >> confdefs.h <<EOF
+#define _NEWLIB_VERSION "$VERSION"
+EOF
+
 
 if test "${multilib}" = "yes"; then
   multilib_arg="--enable-multilib"
@@ -3214,19 +3227,7 @@ fi
 
 trap 'rm -f $CONFIG_STATUS conftest*; exit 1' 1 2 15
 
-# Transform confdefs.h into DEFS.
-# Protect against shell expansion while executing Makefile rules.
-# Protect against Makefile macro expansion.
-cat > conftest.defs <<\EOF
-s%#define \([A-Za-z_][A-Za-z0-9_]*\) *\(.*\)%-D\1=\2%g
-s%[ 	`~#$^&*(){}\\|;'"<>?]%\\&%g
-s%\[%\\&%g
-s%\]%\\&%g
-s%\$%$$%g
-EOF
-DEFS=`sed -f conftest.defs confdefs.h | tr '\012' ' '`
-rm -f conftest.defs
-
+DEFS=-DHAVE_CONFIG_H
 
 # Without the "./", some shells look in PATH for config.status.
 : ${CONFIG_STATUS=./config.status}
@@ -3264,7 +3265,7 @@ done
 ac_given_srcdir=$srcdir
 ac_given_INSTALL="$INSTALL"
 
-trap 'rm -fr `echo "Makefile" | sed "s/:[^ ]*//g"` conftest*; exit 1' 1 2 15
+trap 'rm -fr `echo "Makefile newlib.h:newlib.hin" | sed "s/:[^ ]*//g"` conftest*; exit 1' 1 2 15
 EOF
 cat >> $CONFIG_STATUS <<EOF
 
@@ -3476,8 +3477,116 @@ s%@INSTALL@%$INSTALL%g
 fi; done
 rm -f conftest.s*
 
+# These sed commands are passed to sed as "A NAME B NAME C VALUE D", where
+# NAME is the cpp macro being defined and VALUE is the value it is being given.
+#
+# ac_d sets the value in "#define NAME VALUE" lines.
+ac_dA='s%^\([ 	]*\)#\([ 	]*define[ 	][ 	]*\)'
+ac_dB='\([ 	][ 	]*\)[^ 	]*%\1#\2'
+ac_dC='\3'
+ac_dD='%g'
+# ac_u turns "#undef NAME" with trailing blanks into "#define NAME VALUE".
+ac_uA='s%^\([ 	]*\)#\([ 	]*\)undef\([ 	][ 	]*\)'
+ac_uB='\([ 	]\)%\1#\2define\3'
+ac_uC=' '
+ac_uD='\4%g'
+# ac_e turns "#undef NAME" without trailing blanks into "#define NAME VALUE".
+ac_eA='s%^\([ 	]*\)#\([ 	]*\)undef\([ 	][ 	]*\)'
+ac_eB='$%\1#\2define\3'
+ac_eC=' '
+ac_eD='%g'
+
+if test "${CONFIG_HEADERS+set}" != set; then
 EOF
 cat >> $CONFIG_STATUS <<EOF
+  CONFIG_HEADERS="newlib.h:newlib.hin"
+EOF
+cat >> $CONFIG_STATUS <<\EOF
+fi
+for ac_file in .. $CONFIG_HEADERS; do if test "x$ac_file" != x..; then
+  # Support "outfile[:infile[:infile...]]", defaulting infile="outfile.in".
+  case "$ac_file" in
+  *:*) ac_file_in=`echo "$ac_file"|sed 's%[^:]*:%%'`
+       ac_file=`echo "$ac_file"|sed 's%:.*%%'` ;;
+  *) ac_file_in="${ac_file}.in" ;;
+  esac
+
+  echo creating $ac_file
+
+  rm -f conftest.frag conftest.in conftest.out
+  ac_file_inputs=`echo $ac_file_in|sed -e "s%^%$ac_given_srcdir/%" -e "s%:% $ac_given_srcdir/%g"`
+  cat $ac_file_inputs > conftest.in
+
+EOF
+
+# Transform confdefs.h into a sed script conftest.vals that substitutes
+# the proper values into config.h.in to produce config.h.  And first:
+# Protect against being on the right side of a sed subst in config.status.
+# Protect against being in an unquoted here document in config.status.
+rm -f conftest.vals
+cat > conftest.hdr <<\EOF
+s/[\\&%]/\\&/g
+s%[\\$`]%\\&%g
+s%#define \([A-Za-z_][A-Za-z0-9_]*\) *\(.*\)%${ac_dA}\1${ac_dB}\1${ac_dC}\2${ac_dD}%gp
+s%ac_d%ac_u%gp
+s%ac_u%ac_e%gp
+EOF
+sed -n -f conftest.hdr confdefs.h > conftest.vals
+rm -f conftest.hdr
+
+# This sed command replaces #undef with comments.  This is necessary, for
+# example, in the case of _POSIX_SOURCE, which is predefined and required
+# on some systems where configure will not decide to define it.
+cat >> conftest.vals <<\EOF
+s%^[ 	]*#[ 	]*undef[ 	][ 	]*[a-zA-Z_][a-zA-Z_0-9]*%/* & */%
+EOF
+
+# Break up conftest.vals because some shells have a limit on
+# the size of here documents, and old seds have small limits too.
+
+rm -f conftest.tail
+while :
+do
+  ac_lines=`grep -c . conftest.vals`
+  # grep -c gives empty output for an empty file on some AIX systems.
+  if test -z "$ac_lines" || test "$ac_lines" -eq 0; then break; fi
+  # Write a limited-size here document to conftest.frag.
+  echo '  cat > conftest.frag <<CEOF' >> $CONFIG_STATUS
+  sed ${ac_max_here_lines}q conftest.vals >> $CONFIG_STATUS
+  echo 'CEOF
+  sed -f conftest.frag conftest.in > conftest.out
+  rm -f conftest.in
+  mv conftest.out conftest.in
+' >> $CONFIG_STATUS
+  sed 1,${ac_max_here_lines}d conftest.vals > conftest.tail
+  rm -f conftest.vals
+  mv conftest.tail conftest.vals
+done
+rm -f conftest.vals
+
+cat >> $CONFIG_STATUS <<\EOF
+  rm -f conftest.frag conftest.h
+  echo "/* $ac_file.  Generated automatically by configure.  */" > conftest.h
+  cat conftest.in >> conftest.h
+  rm -f conftest.in
+  if cmp -s $ac_file conftest.h 2>/dev/null; then
+    echo "$ac_file is unchanged"
+    rm -f conftest.h
+  else
+    # Remove last slash and all that follows it.  Not all systems have dirname.
+      ac_dir=`echo $ac_file|sed 's%/[^/][^/]*$%%'`
+      if test "$ac_dir" != "$ac_file" && test "$ac_dir" != .; then
+      # The file is in a subdirectory.
+      test ! -d "$ac_dir" && mkdir "$ac_dir"
+    fi
+    rm -f $ac_file
+    mv conftest.h $ac_file
+  fi
+fi; done
+
+EOF
+cat >> $CONFIG_STATUS <<EOF
+
 srcdir=${srcdir}
 host=${host}
 target=${target}
@@ -3490,7 +3599,9 @@ LDFLAGS="${LDFLAGS}"
 
 EOF
 cat >> $CONFIG_STATUS <<\EOF
+test -z "$CONFIG_HEADERS" || echo timestamp > stamp-h
 if test -n "$CONFIG_FILES"; then
+  unset ac_file
   . ${newlib_basedir}/../config-ml.in
 fi
 exit 0
diff --git a/newlib/configure.in b/newlib/configure.in
index 050948aa3..fc93ae773 100644
--- a/newlib/configure.in
+++ b/newlib/configure.in
@@ -3,6 +3,7 @@ dnl Process this file with autoconf to produce a configure script.
 
 AC_PREREQ(2.5)
 AC_INIT(libc)
+AM_CONFIG_HEADER(newlib.h:newlib.hin)
 
 dnl Can't be done in NEWLIB_CONFIGURE because that confuses automake. 
 AC_CONFIG_AUX_DIR(..)
@@ -18,7 +19,6 @@ AC_ARG_ENABLE(newlib-io-pos-args,
   *)   AC_MSG_ERROR(bad value ${enableval} for newlib-io-pos-args option) ;;
  esac], [newlib_io_pos_args=no])dnl
 
-
 NEWLIB_CONFIGURE(.)
 
 dnl We have to enable libtool after NEWLIB_CONFIGURE because if we try and
@@ -128,6 +128,11 @@ if test -z "$CC_FOR_BUILD"; then
 fi
 AC_SUBST(CC_FOR_BUILD)
 
+if test "${newlib_elix_level}" -gt "0"; then
+AC_DEFINE_UNQUOTED(_ELIX_LEVEL,${newlib_elix_level})
+fi
+
+AC_DEFINE_UNQUOTED(_NEWLIB_VERSION,"$VERSION")
 
 if test "${multilib}" = "yes"; then
   multilib_arg="--enable-multilib"
@@ -138,6 +143,7 @@ fi
 
 AC_OUTPUT(Makefile,
 [if test -n "$CONFIG_FILES"; then
+  unset ac_file
   . ${newlib_basedir}/../config-ml.in
 fi],
 srcdir=${srcdir}
diff --git a/newlib/libc/include/_ansi.h b/newlib/libc/include/_ansi.h
index 6c7beb3cd..07bfd88eb 100644
--- a/newlib/libc/include/_ansi.h
+++ b/newlib/libc/include/_ansi.h
@@ -12,6 +12,7 @@
 #ifndef	_ANSIDECL_H_
 #define	_ANSIDECL_H_
 
+#include <newlib.h>
 #include <sys/config.h>
 
 /* First try to figure out whether we really are in an ANSI C environment.  */
diff --git a/newlib/newlib.hin b/newlib/newlib.hin
new file mode 100644
index 000000000..ca92b9906
--- /dev/null
+++ b/newlib/newlib.hin
@@ -0,0 +1,12 @@
+#ifndef __NEWLIB_H__
+
+#define __NEWLIB_H__ 1
+
+/* EL/IX level */
+#undef _ELIX_LEVEL
+
+/* Newlib version */
+#undef _NEWLIB_VERSION
+
+#endif /* !__NEWLIB_H__ */
+
diff --git a/newlib/stamp-h.in b/newlib/stamp-h.in
new file mode 100644
index 000000000..e69de29bb