2002-11-29 Nathanael Nerode <neroden@gcc.gnu.org>

(Starting slow-motion replay merge from gcc 3.4 b-i-b branch)
	* configure: Remove 'removing', which doesn't work.  Replace $subdir
	with . everywhere.  Replace $subdirs with ''.  Replace $makesrcdir
	with $srcdir.  Reformat indentation.  Substitute some variables
	formerly hard-coded in the Makefile for build=host.
	* Makefile.tpl: Autogenerate more; make more autoconf-friendly.
	* Makefile.def: Autogenerate more.
	* Makefile.in: Regenerate.

ChangeLog

@@ -1,3 +1,14 @@
+2002-11-29  Nathanael Nerode  <neroden@gcc.gnu.org>
+
+	(Starting slow-motion replay merge from gcc 3.4 b-i-b branch)
+	* configure: Remove 'removing', which doesn't work.  Replace $subdir
+	with . everywhere.  Replace $subdirs with ''.  Replace $makesrcdir
+	with $srcdir.  Reformat indentation.  Substitute some variables
+	formerly hard-coded in the Makefile for build=host.
+	* Makefile.tpl: Autogenerate more; make more autoconf-friendly.
+	* Makefile.def: Autogenerate more.
+	* Makefile.in: Regenerate.
+
 2002-11-13  Bruce Korb  <bkorb@gnu.org>
 
 	* Makefile.tpl: syntactic cleanup

Makefile.def

@@ -61,6 +61,13 @@ host_modules= { module= uudecode; };
 host_modules= { module= wdiff; };
 host_modules= { module= zip; no_check_cross=true; };
 host_modules= { module= zlib; no_install=true; no_check=true; };
+host_modules= { module= gdb; with_x=true; };
+host_modules= { module= expect; with_x=true; };
+host_modules= { module= guile; with_x=true; };
+host_modules= { module= tclX; with_x=true; };
+host_modules= { module= tk; with_x=true; };
+host_modules= { module= tix; with_x=true; };
+
 
 target_modules = { module= libstdc++-v3; };
 target_modules = { module= newlib; };

Makefile.in

@@ -82,16 +82,16 @@ INSTALL_DATA = $(INSTALL) -m 644
 
 INSTALL_DOSREL = install-dosrel-fake
 
-AS = as
+AS = @AS@
-AR = ar
+AR = @AR@
 AR_FLAGS = rc
 CC = cc
 
 # Special variables passed down in EXTRA_GCC_FLAGS.  They are defined
 # here so that they can be overridden by Makefile fragments.
 HOST_CC = $(CC_FOR_BUILD)
-BUILD_PREFIX = 
+BUILD_PREFIX = @BUILD_PREFIX@
-BUILD_PREFIX_1 = loser-
+BUILD_PREFIX_1 = @BUILD_PREFIX_1@
 
 # These flag values are normally overridden by the configure script.
 CFLAGS = -g
@@ -117,25 +117,27 @@ LIBCXXFLAGS = $(CXXFLAGS) -fno-implicit-templates
 CXXFLAGS_FOR_TARGET = $(CXXFLAGS)
 LIBCXXFLAGS_FOR_TARGET = $(CXXFLAGS_FOR_TARGET) -fno-implicit-templates
 
-DLLTOOL = dlltool
+DLLTOOL = @DLLTOOL@
-WINDRES = windres
+WINDRES = @WINDRES@
 
-NM = nm
+NM = @NM@
 
-LD = ld
+LD = @LD@
 
 # These values are substituted by configure.
 DEFAULT_YACC = @DEFAULT_YACC@
 DEFAULT_LEX = @DEFAULT_LEX@
 DEFAULT_M4 = @DEFAULT_M4@
 
-BISON = `if [ -f $$r/bison/bison ] ; then \
+BISON=@BISON@
+USUAL_BISON = `if [ -f $$r/bison/bison ] ; then \
 	    echo $$r/bison/bison -L $$s/bison/ ; \
 	 else \
 	    echo bison ; \
 	 fi`
 
-YACC = `if [ -f $$r/bison/bison ] ; then \
+YACC=@YACC@
+USUAL_YACC = `if [ -f $$r/bison/bison ] ; then \
 	    echo $$r/bison/bison -y -L $$s/bison/ ; \
 	elif [ -f $$r/byacc/byacc ] ; then \
 	    echo $$r/byacc/byacc ; \
@@ -143,7 +145,8 @@ YACC = `if [ -f $$r/bison/bison ] ; then \
 	    echo ${DEFAULT_YACC} ; \
 	fi`
 
-LEX = `if [ -f $$r/flex/flex ] ; \
+LEX=@LEX@
+USUAL_LEX = `if [ -f $$r/flex/flex ] ; \
 	then echo $$r/flex/flex ; \
 	else echo ${DEFAULT_LEX} ; fi`
 
@@ -153,7 +156,8 @@ M4 = `if [ -f $$r/m4/m4 ] ; \
 
 # For an installed makeinfo, we require it to be from texinfo 4 or
 # higher, else we use the "missing" dummy.
-MAKEINFO = `if [ -f $$r/texinfo/makeinfo/makeinfo ] ; \
+MAKEINFO=@MAKEINFO@
+USUAL_MAKEINFO = `if [ -f $$r/texinfo/makeinfo/makeinfo ] ; \
 	then echo $$r/texinfo/makeinfo/makeinfo ; \
 	else if (makeinfo --version \
 	  | egrep 'texinfo[^0-9]*([1-3][0-9]|[4-9])') >/dev/null 2>&1; \
@@ -175,7 +179,7 @@ RUNTEST = `if [ -f $$s/dejagnu/runtest ] ; \
 
 # compilers to use to create programs which must be run in the build
 # environment.
-CC_FOR_BUILD = $(CC)
+CC_FOR_BUILD = @CC_FOR_BUILD@
 CXX_FOR_BUILD = $(CXX)
 
 SUBDIRS = @configdirs@
@@ -247,9 +251,11 @@ GCJ_FOR_TARGET = @GCJ_FOR_TARGET@
 # variable is passed down to the gcc Makefile, where it is used to
 # build libgcc2.a.  We define it here so that it can itself be
 # overridden on the command line.
-GCC_FOR_TARGET = $(STAGE_CC_WRAPPER) $$r/gcc/xgcc -B$$r/gcc/ $(FLAGS_FOR_TARGET)
+GCC_FOR_TARGET=@GCC_FOR_TARGET@
+USUAL_GCC_FOR_TARGET = $(STAGE_CC_WRAPPER) $$r/gcc/xgcc -B$$r/gcc/ $(FLAGS_FOR_TARGET)
 
-AS_FOR_TARGET = ` \
+AS_FOR_TARGET=@AS_FOR_TARGET@
+USUAL_AS_FOR_TARGET = ` \
   if [ -f $$r/gas/as-new ] ; then \
     echo $$r/gas/as-new ; \
   elif [ -f $$r/gcc/xgcc ]; then \
@@ -262,7 +268,8 @@ AS_FOR_TARGET = ` \
     fi; \
   fi`
 
-LD_FOR_TARGET = ` \
+LD_FOR_TARGET=@LD_FOR_TARGET@
+USUAL_LD_FOR_TARGET = ` \
   if [ -f $$r/ld/ld-new ] ; then \
     echo $$r/ld/ld-new ; \
   elif [ -f $$r/gcc/xgcc ]; then \
@@ -275,7 +282,8 @@ LD_FOR_TARGET = ` \
     fi; \
   fi`
 
-DLLTOOL_FOR_TARGET = ` \
+DLLTOOL_FOR_TARGET=@DLLTOOL_FOR_TARGET@
+USUAL_DLLTOOL_FOR_TARGET = ` \
   if [ -f $$r/binutils/dlltool ] ; then \
     echo $$r/binutils/dlltool ; \
   else \
@@ -286,7 +294,8 @@ DLLTOOL_FOR_TARGET = ` \
     fi; \
   fi`
 
-WINDRES_FOR_TARGET = ` \
+WINDRES_FOR_TARGET=@WINDRES_FOR_TARGET@
+USUAL_WINDRES_FOR_TARGET = ` \
   if [ -f $$r/binutils/windres ] ; then \
     echo $$r/binutils/windres ; \
   else \
@@ -297,7 +306,8 @@ WINDRES_FOR_TARGET = ` \
     fi; \
   fi`
 
-AR_FOR_TARGET = ` \
+AR_FOR_TARGET=@AR_FOR_TARGET@
+USUAL_AR_FOR_TARGET = ` \
   if [ -f $$r/binutils/ar ] ; then \
     echo $$r/binutils/ar ; \
   else \
@@ -308,7 +318,8 @@ AR_FOR_TARGET = ` \
     fi; \
   fi`
 
-RANLIB_FOR_TARGET = ` \
+RANLIB_FOR_TARGET=@RANLIB_FOR_TARGET@
+USUAL_RANLIB_FOR_TARGET = ` \
   if [ -f $$r/binutils/ranlib ] ; then \
     echo $$r/binutils/ranlib ; \
   else \
@@ -323,7 +334,8 @@ RANLIB_FOR_TARGET = ` \
     fi; \
   fi`
 
-NM_FOR_TARGET = ` \
+NM_FOR_TARGET=@NM_FOR_TARGET@
+USUAL_NM_FOR_TARGET = ` \
   if [ -f $$r/binutils/nm-new ] ; then \
     echo $$r/binutils/nm-new ; \
   elif [ -f $$r/gcc/xgcc ]; then \
@@ -727,8 +739,8 @@ ALL_X11_MODULES = \
 # compiled using $(X11_FLAGS_TO_PASS).
 CHECK_X11_MODULES = \
 	check-gdb \
-	check-guile \
 	check-expect \
+	check-guile \
 	check-tclX \
 	check-tk \
 	check-tix 
@@ -737,8 +749,8 @@ CHECK_X11_MODULES = \
 # compiled using $(X11_FLAGS_TO_PASS).
 INSTALL_X11_MODULES = \
 	install-gdb \
-	install-guile \
 	install-expect \
+	install-guile \
 	install-tclX \
 	install-tk \
 	install-tix 

Makefile.tpl

@@ -1,4 +1,4 @@
-[+ AutoGen5 template -*- Mode: Makefile -*-
+[+ AutoGen5 template
 in
 +]
 
@@ -85,16 +85,16 @@ INSTALL_DATA = $(INSTALL) -m 644
 
 INSTALL_DOSREL = install-dosrel-fake
 
-AS = as
+AS = @AS@
-AR = ar
+AR = @AR@
 AR_FLAGS = rc
 CC = cc
 
 # Special variables passed down in EXTRA_GCC_FLAGS.  They are defined
 # here so that they can be overridden by Makefile fragments.
 HOST_CC = $(CC_FOR_BUILD)
-BUILD_PREFIX = 
+BUILD_PREFIX = @BUILD_PREFIX@
-BUILD_PREFIX_1 = loser-
+BUILD_PREFIX_1 = @BUILD_PREFIX_1@
 
 # These flag values are normally overridden by the configure script.
 CFLAGS = -g
@@ -120,25 +120,27 @@ LIBCXXFLAGS = $(CXXFLAGS) -fno-implicit-templates
 CXXFLAGS_FOR_TARGET = $(CXXFLAGS)
 LIBCXXFLAGS_FOR_TARGET = $(CXXFLAGS_FOR_TARGET) -fno-implicit-templates
 
-DLLTOOL = dlltool
+DLLTOOL = @DLLTOOL@
-WINDRES = windres
+WINDRES = @WINDRES@
 
-NM = nm
+NM = @NM@
 
-LD = ld
+LD = @LD@
 
 # These values are substituted by configure.
 DEFAULT_YACC = @DEFAULT_YACC@
 DEFAULT_LEX = @DEFAULT_LEX@
 DEFAULT_M4 = @DEFAULT_M4@
 
-BISON = `if [ -f $$r/bison/bison ] ; then \
+BISON=@BISON@
+USUAL_BISON = `if [ -f $$r/bison/bison ] ; then \
 	    echo $$r/bison/bison -L $$s/bison/ ; \
 	 else \
 	    echo bison ; \
 	 fi`
 
-YACC = `if [ -f $$r/bison/bison ] ; then \
+YACC=@YACC@
+USUAL_YACC = `if [ -f $$r/bison/bison ] ; then \
 	    echo $$r/bison/bison -y -L $$s/bison/ ; \
 	elif [ -f $$r/byacc/byacc ] ; then \
 	    echo $$r/byacc/byacc ; \
@@ -146,7 +148,8 @@ YACC = `if [ -f $$r/bison/bison ] ; then \
 	    echo ${DEFAULT_YACC} ; \
 	fi`
 
-LEX = `if [ -f $$r/flex/flex ] ; \
+LEX=@LEX@
+USUAL_LEX = `if [ -f $$r/flex/flex ] ; \
 	then echo $$r/flex/flex ; \
 	else echo ${DEFAULT_LEX} ; fi`
 
@@ -156,7 +159,8 @@ M4 = `if [ -f $$r/m4/m4 ] ; \
 
 # For an installed makeinfo, we require it to be from texinfo 4 or
 # higher, else we use the "missing" dummy.
-MAKEINFO = `if [ -f $$r/texinfo/makeinfo/makeinfo ] ; \
+MAKEINFO=@MAKEINFO@
+USUAL_MAKEINFO = `if [ -f $$r/texinfo/makeinfo/makeinfo ] ; \
 	then echo $$r/texinfo/makeinfo/makeinfo ; \
 	else if (makeinfo --version \
 	  | egrep 'texinfo[^0-9]*([1-3][0-9]|[4-9])') >/dev/null 2>&1; \
@@ -178,7 +182,7 @@ RUNTEST = `if [ -f $$s/dejagnu/runtest ] ; \
 
 # compilers to use to create programs which must be run in the build
 # environment.
-CC_FOR_BUILD = $(CC)
+CC_FOR_BUILD = @CC_FOR_BUILD@
 CXX_FOR_BUILD = $(CXX)
 
 SUBDIRS = @configdirs@
@@ -250,9 +254,11 @@ GCJ_FOR_TARGET = @GCJ_FOR_TARGET@
 # variable is passed down to the gcc Makefile, where it is used to
 # build libgcc2.a.  We define it here so that it can itself be
 # overridden on the command line.
-GCC_FOR_TARGET = $(STAGE_CC_WRAPPER) $$r/gcc/xgcc -B$$r/gcc/ $(FLAGS_FOR_TARGET)
+GCC_FOR_TARGET=@GCC_FOR_TARGET@
+USUAL_GCC_FOR_TARGET = $(STAGE_CC_WRAPPER) $$r/gcc/xgcc -B$$r/gcc/ $(FLAGS_FOR_TARGET)
 
-AS_FOR_TARGET = ` \
+AS_FOR_TARGET=@AS_FOR_TARGET@
+USUAL_AS_FOR_TARGET = ` \
   if [ -f $$r/gas/as-new ] ; then \
     echo $$r/gas/as-new ; \
   elif [ -f $$r/gcc/xgcc ]; then \
@@ -265,7 +271,8 @@ AS_FOR_TARGET = ` \
     fi; \
   fi`
 
-LD_FOR_TARGET = ` \
+LD_FOR_TARGET=@LD_FOR_TARGET@
+USUAL_LD_FOR_TARGET = ` \
   if [ -f $$r/ld/ld-new ] ; then \
     echo $$r/ld/ld-new ; \
   elif [ -f $$r/gcc/xgcc ]; then \
@@ -278,7 +285,8 @@ LD_FOR_TARGET = ` \
     fi; \
   fi`
 
-DLLTOOL_FOR_TARGET = ` \
+DLLTOOL_FOR_TARGET=@DLLTOOL_FOR_TARGET@
+USUAL_DLLTOOL_FOR_TARGET = ` \
   if [ -f $$r/binutils/dlltool ] ; then \
     echo $$r/binutils/dlltool ; \
   else \
@@ -289,7 +297,8 @@ DLLTOOL_FOR_TARGET = ` \
     fi; \
   fi`
 
-WINDRES_FOR_TARGET = ` \
+WINDRES_FOR_TARGET=@WINDRES_FOR_TARGET@
+USUAL_WINDRES_FOR_TARGET = ` \
   if [ -f $$r/binutils/windres ] ; then \
     echo $$r/binutils/windres ; \
   else \
@@ -300,7 +309,8 @@ WINDRES_FOR_TARGET = ` \
     fi; \
   fi`
 
-AR_FOR_TARGET = ` \
+AR_FOR_TARGET=@AR_FOR_TARGET@
+USUAL_AR_FOR_TARGET = ` \
   if [ -f $$r/binutils/ar ] ; then \
     echo $$r/binutils/ar ; \
   else \
@@ -311,7 +321,8 @@ AR_FOR_TARGET = ` \
     fi; \
   fi`
 
-RANLIB_FOR_TARGET = ` \
+RANLIB_FOR_TARGET=@RANLIB_FOR_TARGET@
+USUAL_RANLIB_FOR_TARGET = ` \
   if [ -f $$r/binutils/ranlib ] ; then \
     echo $$r/binutils/ranlib ; \
   else \
@@ -326,7 +337,8 @@ RANLIB_FOR_TARGET = ` \
     fi; \
   fi`
 
-NM_FOR_TARGET = ` \
+NM_FOR_TARGET=@NM_FOR_TARGET@
+USUAL_NM_FOR_TARGET = ` \
   if [ -f $$r/binutils/nm-new ] ; then \
     echo $$r/binutils/nm-new ; \
   elif [ -f $$r/gcc/xgcc ]; then \
@@ -522,10 +534,8 @@ CONFIGURE_BUILD_MODULES = \
 
 # This is a list of the targets for all of the modules which are compiled
 # using $(FLAGS_TO_PASS).
-ALL_MODULES =[+
+ALL_MODULES = [+ FOR host_modules +][+ IF with_x +][+ ELSE with_x +]\
-    FOR host_modules +] \
+	all-[+module+] [+ ENDIF with_x +][+ ENDFOR host_modules +]\
-	all-[+module+][+
-    ENDFOR host_modules +] \
 	$(EXTRA_TARGET_HOST_ALL_MODULES)
 
 # This is a list of the check targets for all of the modules which are
@@ -541,113 +551,64 @@ NATIVE_CHECK_MODULES = \
 	check-flex \
 	check-zip
 
-CROSS_CHECK_MODULES =[+
+CROSS_CHECK_MODULES = [+ FOR host_modules +][+ IF no_check  +][+ ELIF no_check_cross +][+ ELIF with_x +][+ ELSE check +]\
-    FOR host_modules +][+
+	check-[+module+] [+ ENDIF no_check +][+ ENDFOR host_modules +]\
-        IF (not (or (exist? "no_check_cross") (exist? "no_check")))
-           +] \
-	check-[+module+][+
-        ENDIF no_check +][+
-    ENDFOR host_modules +] \
 	$(EXTRA_TARGET_HOST_CHECK_MODULES)
 
 CHECK_MODULES=$(NATIVE_CHECK_MODULES) $(CROSS_CHECK_MODULES)
 
 # This is a list of the install targets for all of the modules which are
 # compiled using $(FLAGS_TO_PASS).
-INSTALL_MODULES =[+
+INSTALL_MODULES = [+ FOR host_modules+][+ IF no_install +][+ ELIF with_x +][+ ELSE install +]\
-    FOR host_modules+][+
+	install-[+module+] [+ ENDIF no_install +][+ ENDFOR host_modules +]\
-        IF (not (exist? "no_install")) +] \
-	install-[+module+][+
-        ENDIF no_install +][+
-    ENDFOR host_modules +] \
 	$(EXTRA_TARGET_HOST_INSTALL_MODULES)
 
 # This is a list of the targets for all of the modules which are compiled
 # using $(X11_FLAGS_TO_PASS).
-ALL_X11_MODULES = \
+ALL_X11_MODULES = [+ FOR host_modules +][+ IF with_x +]\
-	all-gdb \
+	all-[+module+] [+ ENDIF with_x +][+ ENDFOR host_modules +]
-	all-expect \
-	all-guile \
-	all-tclX \
-	all-tk \
-	all-tix
 
 # This is a list of the check targets for all of the modules which are
 # compiled using $(X11_FLAGS_TO_PASS).
-CHECK_X11_MODULES = \
+CHECK_X11_MODULES = [+ FOR host_modules +][+ IF with_x +]\
-	check-gdb \
+	check-[+module+] [+ ENDIF with_x +][+ ENDFOR host_modules +]
-	check-guile \
-	check-expect \
-	check-tclX \
-	check-tk \
-	check-tix
 
 # This is a list of the install targets for all the modules which are
 # compiled using $(X11_FLAGS_TO_PASS).
-INSTALL_X11_MODULES = \
+INSTALL_X11_MODULES = [+ FOR host_modules +][+ IF with_x +]\
-	install-gdb \
+	install-[+module+] [+ ENDIF with_x +][+ ENDFOR host_modules +]
-	install-guile \
-	install-expect \
-	install-tclX \
-	install-tk \
-	install-tix
 
 # This is a list of the targets for all of the modules which are compiled
 # using $(TARGET_FLAGS_TO_PASS).
-ALL_TARGET_MODULES =[+
+ALL_TARGET_MODULES = [+ FOR target_modules +]\
-    FOR target_modules +] \
+	all-target-[+module+] [+ ENDFOR target_modules +]
-	all-target-[+module+][+
-    ENDFOR target_modules +]
 
 # This is a list of the configure targets for all of the modules which
 # are compiled using the target tools.
-CONFIGURE_TARGET_MODULES =[+
+CONFIGURE_TARGET_MODULES = [+ FOR target_modules +]\
-    FOR target_modules +] \
+	configure-target-[+module+] [+ ENDFOR target_modules +]
-	configure-target-[+module+][+
-    ENDFOR target_modules +]
 
 # This is a list of the check targets for all of the modules which are
 # compiled using $(TARGET_FLAGS_TO_PASS).
-CHECK_TARGET_MODULES =[+
+CHECK_TARGET_MODULES = [+ FOR target_modules +][+ IF no_check +][+ ELSE check +]\
-    FOR target_modules +][+
+	check-target-[+module+] [+ ENDIF no_check +][+ ENDFOR target_modules +]
-        IF (not (exist? "no_check")) +] \
-	check-target-[+module+][+
-        ENDIF no_check +][+
-    ENDFOR target_modules +]
 
 # This is a list of the install targets for all of the modules which are
 # compiled using $(TARGET_FLAGS_TO_PASS).
-INSTALL_TARGET_MODULES =[+
+INSTALL_TARGET_MODULES = [+ FOR target_modules +][+ IF no_install +][+ ELSE install +]\
-    FOR target_modules +][+
+	install-target-[+module+] [+ ENDIF no_install +][+ ENDFOR target_modules +]
-        IF (not (exist? "no_install")) +] \
-	install-target-[+module+][+
-        ENDIF no_install +][+
-    ENDFOR target_modules +]
 
 # This is a list of the targets for which we can do a clean-{target}.
-CLEAN_MODULES =[+
+CLEAN_MODULES = [+ FOR host_modules +][+ IF no_clean +][+ ELIF with_x +][+ ELSE clean +]\
-    FOR host_modules +][+
+	clean-[+module+] [+ ENDIF no_clean +][+ ENDFOR host_modules +]
-        IF (not (exist? "no_clean")) +] \
-	clean-[+module+][+
-        ENDIF no_clean +][+
-    ENDFOR host_modules +]
 
 # All of the target modules that can be cleaned
-CLEAN_TARGET_MODULES =[+
+CLEAN_TARGET_MODULES = [+ FOR target_modules +][+ IF no_clean +][+ ELSE clean +]\
-    FOR target_modules +][+
+	clean-target-[+module+] [+ ENDIF no_clean +][+ ENDFOR target_modules +]
-        IF (not (exist? "no_clean")) +] \
-	clean-target-[+module+][+
-        ENDIF no_clean +][+
-    ENDFOR target_modules +]
 
 # All of the x11 modules that can be cleaned
-CLEAN_X11_MODULES = \
+CLEAN_X11_MODULES = [+ FOR host_modules +][+ IF with_x +]\
-	clean-gdb \
+	clean-[+module+] [+ ENDIF with_x +][+ ENDFOR host_modules +]
-	clean-expect \
-	clean-guile \
-	clean-tclX \
-	clean-tk \
-	clean-tix
 
 # The target built for a native build.
 .PHONY: all.normal

configure

@@ -79,13 +79,11 @@ program_suffixoption=
 program_transform_name=
 program_transform_nameoption=
 redirect=
-removing=
 site=
 site_makefile_frag=
 site_option=
 srcdir=
 srctrigger=
-subdirs=
 target_alias=NOTARGET
 target_makefile_frag=
 undefs=NOUNDEFS
@@ -317,9 +315,6 @@ do
 		program_transform_name="${program_transform_name} -e `echo ${optarg} | sed -e 's/\\\\/\\\\\\\\/g' -e 's/\\\$/$$/g'`"
 		program_transform_nameoption="${program_transform_nameoption} --program-transform-name='$optarg'"
 		;;
-	--rm)
-		removing=--rm
-		;;
 	--sb*)
 		sbindir=$optarg
 		diroptions="$diroptions --sbindir=$optarg"
@@ -639,7 +634,7 @@ case "`grep '^# per\-host:' ${srcdir}/configure.in`" in
 		${program_transform_nameoption} ${site_option} \
 		${withoptions} ${withoutoptions} \
 		${enableoptions} ${disableoptions} ${floating_pointoption} \
-		${cache_file_option} ${removing} ${other_options} ${redirect}
+		${cache_file_option} ${other_options} ${redirect}
 	  else
 	    echo '***' There is no configure script present though. 1>&2
 	  fi
@@ -911,10 +906,10 @@ do
   test -n "$DEFAULT_LEX" && break
 done
 
+
 if [ "${build}" != "${host}" ]; then
   # If we are doing a Canadian Cross, in which the host and build systems
   # are not the same, we set reasonable default values for the tools.
-
   tools="AR AR_FOR_TARGET AS AS_FOR_TARGET BISON CC_FOR_BUILD"
   tools="${tools} CC_FOR_TARGET CXX_FOR_TARGET GCJ_FOR_TARGET"
   tools="${tools} DLLTOOL DLLTOOL_FOR_TARGET GCC_FOR_TARGET BUILD_PREFIX"
@@ -1021,6 +1016,42 @@ t loop
   export OBJCOPY
   export OBJDUMP
 else
+  # Set reasonable default values for some tools even if not Canadian.
+  # Of course, these are different reasonable default values, originally
+  # specified directly in the Makefile.
+  # We don't export, so that autoconf can do its job.
+  # Note that all these settings are above the fragment inclusion point
+  # in Makefile.in, so can still be overridden by fragments.
+  # This is all going to change when we autoconfiscate...
+
+  tools="AR AR_FOR_TARGET AS AS_FOR_TARGET BISON CC_FOR_BUILD"
+  tools="${tools} DLLTOOL DLLTOOL_FOR_TARGET GCC_FOR_TARGET BUILD_PREFIX"
+  tools="${tools} BUILD_PREFIX_1 LD LD_FOR_TARGET LEX MAKEINFO NM"
+  tools="${tools} NM_FOR_TARGET RANLIB_FOR_TARGET"
+  tools="${tools} WINDRES WINDRES_FOR_TARGET YACC"
+
+  AR=ar
+  AR_FOR_TARGET='\$(USUAL_AR_FOR_TARGET)'
+  AS=as
+  AS_FOR_TARGET='\$(USUAL_AS_FOR_TARGET)'
+  BISON='$(USUAL_BISON)'
+  CC_FOR_BUILD='\$(CC)'
+  DLLTOOL=dlltool
+  DLLTOOL_FOR_TARGET='\$(USUAL_DLLTOOL_FOR_TARGET)'
+  GCC_FOR_TARGET='\$(USUAL_GCC_FOR_TARGET)'
+  BUILD_PREFIX=
+  BUILD_PREFIX_1=loser-
+  LD=ld
+  LD_FOR_TARGET='\$(USUAL_LD_FOR_TARGET)'
+  MAKEINFO='\$(USUAL_MAKEINFO)'
+  NM=nm
+  NM_FOR_TARGET='\$(USUAL_NM_FOR_TARGET)'
+  RANLIB_FOR_TARGET='\$(USUAL_RANLIB_FOR_TARGET)'
+  WINDRES=windres
+  WINDRES_FOR_TARGET='\$(USUAL_WINDRES_FOR_TARGET)'
+  LEX='\$(USUAL_LEX)'
+  YACC='\$(USUAL_YACC)'
+
   # If CC is still not set, try to get gcc.
   if [ -z "${CC}" ]; then
     IFS="${IFS= 	}"; save_ifs="$IFS"; IFS="${IFS}:"
@@ -1078,56 +1109,14 @@ then
   all_build_modules='$(ALL_BUILD_MODULES_LIST)'
 fi
 
-for subdir in . ${subdirs} ; do
-
-    # ${subdir} is relative path from . to the directory we're currently
-    # configuring.
-    # ${invsubdir} is inverse of ${subdir), *with* trailing /, if needed.
-    invsubdir=`echo ${subdir}/ | sed -e 's|\./||g' -e 's|[^/]*/|../|g'`
-
-    ### figure out what to do with srcdir
-    case "${srcdir}" in
-        ".")  # no -srcdir option.  We're building in place.
-                makesrcdir=. ;;
-        /* | [A-Za-z]:[\\/]* ) # absolute path
-                makesrcdir=`echo ${srcdir}/${subdir} | sed -e 's|/\.$||'`
-                ;;
-        *) # otherwise relative
-                case "${subdir}" in
-                .) makesrcdir=${srcdir} ;;
-                *) makesrcdir=${invsubdir}${srcdir}/${subdir} ;;
-                esac
-                ;;
-    esac
-
-    if [ "${subdir}/" != "./" ] ; then
-        Makefile=${subdir}/Makefile
-    fi
-
-    if [ ! -d ${subdir} ] ; then
-        if mkdir ${subdir} ; then
-                true
-        else
-                echo '***' "${progname}: could not make ${PWD=`${PWDCMD-pwd}`}/${subdir}" 1>&2
-                exit 1
-        fi
-    fi
-
-    case "${removing}" in
-    "")
-        case "${subdir}" in
-        .) ;;
-        *) eval echo Building in ${subdir} ${redirect} ;;
-        esac
-
 # FIXME Should this be done recursively ??? (Useful for e.g. gdbtest)
 # Set up the list of links to be made.
 # ${links} is the list of link names, and ${files} is the list of names to link to.
 
 # Make the links.
 configlinks="${links}"
-        if [ -r ${subdir}/config.status ] ; then
+if [ -r ./config.status ] ; then
-                mv -f ${subdir}/config.status ${subdir}/config.back
+  mv -f ./config.status ./config.back
 fi
 while [ -n "${files}" ] ; do
   # set file to car of files, files to cdr of files
@@ -1136,7 +1125,6 @@ for subdir in . ${subdirs} ; do
 
   if [ ! -r ${srcdir}/${file} ] ; then
     if [ ! -r ${file} ] ; then
-		    
       echo '***' "${progname}: cannot create a link \"${link}\"," 1>&2
       echo '***' "since the file \"${srcdir}/${file}\" does not exist." 1>&2
       exit 1
@@ -1168,14 +1156,14 @@ for subdir in . ${subdirs} ; do
 # Create a .gdbinit file which runs the one in srcdir
 # and tells GDB to look there for source files.
 
-        if [ -r ${srcdir}/${subdir}/.gdbinit ] ; then
+if [ -r ${srcdir}/.gdbinit ] ; then
   case ${srcdir} in
     .) ;;
-                *) cat > ${subdir}/.gdbinit <<EOF
+    *) cat > ./.gdbinit <<EOF
 # ${NO_EDIT}
-dir ${makesrcdir}
+dir ${srcdir}
 dir .
-source ${makesrcdir}/.gdbinit
+source ${srcdir}/.gdbinit
 EOF
     ;;
   esac
@@ -1193,22 +1181,22 @@ EOF
 # the five makefile fragments MUST end up in the resulting Makefile in this order: 
 # package macros, target, host, site, and package rules.
 
-        if [ -f ${srcdir}/${subdir}/${Makefile_in} ] ; then
+if [ -f ${srcdir}/${Makefile_in} ] ; then
 
   # Conditionalize the makefile for this package from "Makefile.in" (or whatever it's called) into Makefile.tem.
-            rm -f ${subdir}/${Makefile}.tem
+  rm -f ./${Makefile}.tem
   case "${package_makefile_rules_frag}" in
-              "") cp ${srcdir}/${subdir}/${Makefile_in} ${subdir}/Makefile.tem ;;
+    "") cp ${srcdir}/${Makefile_in} ./Makefile.tem ;;
     *)
       if [ ! -f ${package_makefile_rules_frag} ] ; then
         package_makefile_rules_frag=${srcdir}/${package_makefile_rules_frag}
       fi
       if [ -f ${package_makefile_rules_frag} ] ; then
-                              sed -e "/^####/  r ${package_makefile_rules_frag}" ${srcdir}/${subdir}/${Makefile_in} > ${Makefile}.tem
+        sed -e "/^####/  r ${package_makefile_rules_frag}" ${srcdir}/${Makefile_in} > ${Makefile}.tem
       else
         echo '***' Expected package makefile rules fragment \"${package_makefile_rules_frag}\" 1>&2
         echo '***' is missing in ${PWD=`${PWDCMD-pwd}`}. 1>&2
-                              cp ${srcdir}/${subdir}/${Makefile_in} ${subdir}/Makefile.tem
+        cp ${srcdir}/${Makefile_in} ./Makefile.tem
       fi
   esac
   # working copy now in ${Makefile}.tem
@@ -1216,15 +1204,14 @@ EOF
   # Conditionalize for this site.
   rm -f ${Makefile}
   case "${site}" in
-              "") mv ${subdir}/Makefile.tem ${Makefile} ;;
+    "") mv ./Makefile.tem ${Makefile} ;;
     *)
       site_makefile_frag=${srcdir}/config/ms-${site}
 
       if [ -f ${site_makefile_frag} ] ; then
-                              sed -e "/^####/  r ${site_makefile_frag}" ${subdir}/Makefile.tem \
+        sed -e "/^####/  r ${site_makefile_frag}" ./Makefile.tem > ${Makefile}
-                                      > ${Makefile}
       else
-                              mv ${subdir}/Makefile.tem ${Makefile}
+        mv ./Makefile.tem ${Makefile}
         site_makefile_frag=
       fi
       ;;
@@ -1232,35 +1219,35 @@ EOF
   # working copy now in ${Makefile}
 
   # Conditionalize the makefile for this host.
-            rm -f ${subdir}/Makefile.tem
+  rm -f ./Makefile.tem
   case "${host_makefile_frag}" in
-              "") mv ${Makefile} ${subdir}/Makefile.tem ;;
+    "") mv ${Makefile} ./Makefile.tem ;;
     *)
       if [ ! -f ${host_makefile_frag} ] ; then
         host_makefile_frag=${srcdir}/${host_makefile_frag}
       fi
       if [ -f ${host_makefile_frag} ] ; then
-                              sed -e "/^####/  r ${host_makefile_frag}" ${Makefile} > ${subdir}/Makefile.tem
+        sed -e "/^####/  r ${host_makefile_frag}" ${Makefile} > ./Makefile.tem
       else
         echo '***' Expected host makefile fragment \"${host_makefile_frag}\" 1>&2
         echo '***' is missing in ${PWD=`${PWDCMD-pwd}`}. 1>&2
-                              mv ${Makefile} ${subdir}/Makefile.tem
+        mv ${Makefile} ./Makefile.tem
       fi
   esac
-            # working copy now in ${subdir)/Makefile.tem
+  # working copy now in ./Makefile.tem
 
   # Conditionalize the makefile for this target.
   rm -f ${Makefile}
   case "${target_makefile_frag}" in
-              "") mv ${subdir}/Makefile.tem ${Makefile} ;;
+    "") mv ./Makefile.tem ${Makefile} ;;
     *)
       if [ ! -f ${target_makefile_frag} ] ; then
         target_makefile_frag=${srcdir}/${target_makefile_frag}
       fi
       if [ -f ${target_makefile_frag} ] ; then
-                              sed -e "/^####/  r ${target_makefile_frag}" ${subdir}/Makefile.tem > ${Makefile}
+        sed -e "/^####/  r ${target_makefile_frag}" ./Makefile.tem > ${Makefile}
       else
-                              mv ${subdir}/Makefile.tem ${Makefile}
+        mv ./Makefile.tem ${Makefile}
         target_makefile_frag=
       fi
       ;;
@@ -1268,28 +1255,28 @@ EOF
   # working copy now in ${Makefile}
 
   # Emit the default values of this package's macros.
-            rm -f ${subdir}/Makefile.tem
+  rm -f ./Makefile.tem
   case "${package_makefile_frag}" in
-              "") mv ${Makefile} ${subdir}/Makefile.tem ;;
+    "") mv ${Makefile} ./Makefile.tem ;;
     *)
       if [ ! -f ${package_makefile_frag} ] ; then
         package_makefile_frag=${srcdir}/${package_makefile_frag}
       fi
       if [ -f ${package_makefile_frag} ] ; then
-                              sed -e "/^####/  r ${package_makefile_frag}" ${Makefile} > ${subdir}/Makefile.tem
+        sed -e "/^####/  r ${package_makefile_frag}" ${Makefile} > ./Makefile.tem
       else
         echo '***' Expected package makefile fragment \"${package_makefile_rules_frag}\" 1>&2
         echo '***' is missing in ${PWD=`${PWDCMD-pwd}`}. 1>&2
-                              mv ${Makefile} ${subdir}/Makefile.tem
+        mv ${Makefile} ./Makefile.tem
       fi
   esac
-            # real copy now in ${subdir}/Makefile.tem
+  # real copy now in ./Makefile.tem
 
   # prepend warning about editing, and a bunch of variables.
   rm -f ${Makefile}
   cat > ${Makefile} <<EOF
 # ${NO_EDIT}
-VPATH = ${makesrcdir}
+VPATH = ${srcdir}
 links = ${configlinks}
 host_alias = ${host_alias}
 host_cpu = ${host_cpu}
@@ -1316,23 +1303,23 @@ EOF
   case "${package_makefile_frag}" in
     "") ;;
     /* | [A-Za-z]:[\\/]* ) echo package_makefile_frag = ${package_makefile_frag} >>${Makefile} ;;
-              *)  echo package_makefile_frag = ${invsubdir}${package_makefile_frag} >>${Makefile} ;;
+    *)  echo package_makefile_frag = ${package_makefile_frag} >>${Makefile} ;;
   esac
 
   case "${target_makefile_frag}" in
     "") ;;
     /* | [A-Za-z]:[\\/]* ) echo target_makefile_frag = ${target_makefile_frag} >>${Makefile} ;;
-              *)  echo target_makefile_frag = ${invsubdir}${target_makefile_frag} >>${Makefile} ;;
+    *)  echo target_makefile_frag = ${target_makefile_frag} >>${Makefile} ;;
   esac
 
   case "${host_makefile_frag}" in
     "") ;;
     /* | [A-Za-z]:[\\/]* ) echo host_makefile_frag = ${host_makefile_frag} >>${Makefile} ;;
-              *)  echo host_makefile_frag = ${invsubdir}${host_makefile_frag} >>${Makefile} ;;
+    *)  echo host_makefile_frag = ${host_makefile_frag} >>${Makefile} ;;
   esac
 
   if [ "${site_makefile_frag}" != "" ] ; then
-                echo site_makefile_frag = ${invsubdir}${site_makefile_frag} >>${Makefile}
+    echo site_makefile_frag = ${site_makefile_frag} >>${Makefile}
   fi 
 
   echo enable_shared = ${enable_shared} >> ${Makefile}
@@ -1352,18 +1339,15 @@ EOF
 
   # reset prefix, exec_prefix, srcdir, SUBDIRS, NONSUBDIRS,
   # remove any form feeds.
-            if [ -z "${subdirs}" ]; then
+  rm -f ./Makefile.tm2
-                rm -f ${subdir}/Makefile.tm2
   sedtemp=sed.$$
   cat >$sedtemp <<EOF
 s:@configdirs@:${configdirs}:
 EOF
-                sed -f $sedtemp \
+  sed -f $sedtemp ./Makefile.tem > ./Makefile.tm2
-                    ${subdir}/Makefile.tem > ${subdir}/Makefile.tm2
   rm -f $sedtemp
-                rm -f ${subdir}/Makefile.tem
+  rm -f ./Makefile.tem
-                mv ${subdir}/Makefile.tm2 ${subdir}/Makefile.tem
+  mv ./Makefile.tm2 ./Makefile.tem
-	    fi
   sed -e "s|@prefix@|${prefix}|" \
       -e "s|@exec_prefix@|${exec_prefix}|" \
       -e "s|@bindir@|${bindir}|" \
@@ -1408,7 +1392,7 @@ EOF
           s%^CXXFLAGS[ 	]*=.*$%CXXFLAGS = ${CXXFLAGS}%
           }" \
       -e "s|@config_shell@|${config_shell}|" \
-                    -e "s|@srcdir@|${makesrcdir}|" \
+      -e "s|@srcdir@|${srcdir}|" \
       -e "s///" \
       -e "s:@program_transform_name@:${program_transform_name}:" \
       -e "s|@tooldir@|${tooldir}|" \
@@ -1416,8 +1400,7 @@ EOF
       -e "s:@DEFAULT_YACC@:${DEFAULT_YACC}:" \
       -e "s:@DEFAULT_LEX@:${DEFAULT_LEX}:" \
       -e "s:@DEFAULT_M4@:${DEFAULT_M4}:" \
-                    ${subdir}/Makefile.tem >> ${Makefile}
+          ./Makefile.tem >> ${Makefile}
-  
   sed -e "s:@GDB_TK@:${GDB_TK}:" ${Makefile} >${Makefile}.tem
   mv -f ${Makefile}.tem ${Makefile}
 
@@ -1436,14 +1419,26 @@ EOF
       mv -f ${Makefile}.tem ${Makefile}
     done
   fi
+  # If this is NOT a Canadian Cross, preset the values of some more
+  # tools.  The above line should get merged into this, but this
+  # substitutes *once* where the above substitutes *globally*; that
+  # needs to be worked out before the merger.  The issue is in Makefile
+  # fragment elements (ick, yuck, ugh).
+  if [ "${build}" = "${host}" ]; then
+    for var in ${tools}; do
+      eval val=\$${var}
+      sed -e "s%@${var}@%${val}%" ${Makefile} > ${Makefile}.tem
+      mv -f ${Makefile}.tem ${Makefile}
+    done
+  fi
 
   # final copy now in ${Makefile}
 
 else
-           echo "No Makefile.in found in ${srcdir}/${subdir}, unable to configure" 1>&2
+  echo "No Makefile.in found in ${srcdir}/., unable to configure" 1>&2
 fi
 
-        rm -f ${subdir}/Makefile.tem
+rm -f ./Makefile.tem
 
 case "${host_makefile_frag}" in
   "") using= ;;
@@ -1476,30 +1471,16 @@ EOF
   *) ;;
 esac
 
-        if [ ${subdir} = . ] ; then
 echo "#!/bin/sh
 # ${NO_EDIT}
 # This directory was configured as follows:
 ${progname}" ${arguments}  "
-# ${using}" > ${subdir}/config.new
+# ${using}" > ./config.new
-        else
+chmod a+x ./config.new
-            echo "#!/bin/sh
+if [ -r ./config.back ] ; then
-# ${NO_EDIT}
+  mv -f ./config.back ./config.status
-# This directory was configured as follows:
-cd ${invsubdir}
-${progname}" ${arguments}  "
-# ${using}" > ${subdir}/config.new
 fi
-        chmod a+x ${subdir}/config.new
+${config_shell} ${moveifchange} ./config.new ./config.status
-        if [ -r ${subdir}/config.back ] ; then
-                mv -f ${subdir}/config.back ${subdir}/config.status
-        fi
-	${config_shell} ${moveifchange} ${subdir}/config.new ${subdir}/config.status
-        ;;
-
-    *)  rm -f ${Makefile} ${subdir}/config.status ${links} ;;
-    esac
-done
 
 # If there are subdirectories, then recur.
 if [ -z "${norecursion}" ] && [ -n "${configdirs}" ] ; then 
@@ -1580,7 +1561,7 @@ if [ -z "${norecursion}" ] && [ -n "${configdirs}" ] ; then
 			if [ ! -z "${recprog}" ] ; then
 	                        if eval ${config_shell} ${recprog} ${verbose} ${buildopt} --host=${host_alias} --target=${tgt_alias} \
         	                        ${prefixoption} ${tmpdiroption} ${exec_prefixoption} \
-                	                ${srcdiroption} ${diroptions} ${program_prefixoption} ${program_suffixoption} ${program_transform_nameoption} ${site_option} ${withoptions} ${withoutoptions} ${enableoptions} ${disableoptions} ${floating_pointoption} ${cache_file_option} ${removing} ${other_options} ${redirect} ; then
+                	                ${srcdiroption} ${diroptions} ${program_prefixoption} ${program_suffixoption} ${program_transform_nameoption} ${site_option} ${withoptions} ${withoutoptions} ${enableoptions} ${disableoptions} ${floating_pointoption} ${cache_file_option} ${other_options} ${redirect} ; then
 	                                true
         	                else
 					echo Configure in `${PWDCMD-pwd}` failed, exiting. 1>&2