ChangeLog:

2012-11-12  Christopher Faylor  <me.cygwin2012@cgf.cx>

	* Makefile.common: Revamp for new configury.  Add default compilation
	targets, include .E processing.  Add magic for allowing "CFLAGS" to
	control optimization options in "CXXFLAGS".
	* configure.cygwin: New include for Cygwin configure.in's.
	* acinclude.m4: Delete old definitions.  Implement AC_WINDOWS_HEADERS,
	AC_WINDOWS_LIBS, AC_CYGWIN_INCLUDES, target_builddir, winsup_srcdir.
	* aclocal.m4: Regenerate.
	* autogen.sh: New file.
	* ccwrap: New script.
	* c++wrap: New script.
	* config.guess: New script.
	* config.sub: New script.
	* configure: Regenerate.
	* configure.in: Eliminate LIB_AC_PROG_* calls in favor of standard.
	Delete ancient target test.
	* install-sh: New script.

cygserver/ChangeLog:
2012-11-12  Christopher Faylor  <me.cygwin2012@cgf.cx>

	* Makefile.in: Revamp for new configury.
	* configure.in: Revamp for new configury.
	* aclocal.m4: Regenerate.
	* configure: Ditto.
	* autogen.sh: New script.

cygwin/ChangeLog:
2012-11-22  Christopher Faylor  <me.cygwin2012@cgf.cx>

	* select.cc (select): Don't return -1 when we've timed out after
	looping.

2012-11-22  Christopher Faylor  <me.cygwin2012@cgf.cx>

	* Makefile.in: Revamp for new configury.
	(datarootdir): Add variable setting.
	(winver_stamp): Accommodate changes to mkvers.sh setting.
	(libc.a): Fix race when libm.a might not have been built yet.
	* configure.in: Revamp for new configury.
	* aclocal.m4: Regenerate.
	* configure: Ditto.
	* autogen.sh: New script.
	* mkvers.sh: Find include directives via CFLAGS and friends rather than
	assuming that w32api lives nearby.

utils/ChangeLog:
2012-11-12  Christopher Faylor  <me.cygwin2012@cgf.cx>

	* aclocal.m4: Regenerate.
	* configure: Ditto.
	* autogen.sh: New script.
	* configure.in: Revamp for new configury.
	* Makefile.in: Revamp for new configury.  Rename ALL_* to just *.
	Always use "VERBOSE" setting.
	(MINGW_CXX): Don't include CFLAGS in definition.
	(all): Define target first, before everything else so that it is the
	default.
	(ps.exe): Don't add useless -lcygwin.
	(ldh.exe): For consistency, add to existing MINGW_LDFLAGS rather than
	redefining them.
	(cygcheck.exe): Always include -lz for MINGW_LDFLAGS.  Don't try to
	figure out where to find it.
	(dumper.exe): Simplify check.  Assume libraries are installed rather
	than trying to retrieve from source tree.
	(install): Just use /bin/mkdir to create directories.
	(Makefile): Regenerate when standard dependencies change.
	* dump_setup.cc: Always include zlib.h.  Remove accommodations for it
	possibly not existing.
	* parse_pe.cc: Add define which allows building with installed
	binutils package.
	* dumper.cc: Ditto.
This commit is contained in:
Christopher Faylor
2012-11-23 13:22:47 +00:00
parent 1cfd36169c
commit 4c36016b57
39 changed files with 6306 additions and 4709 deletions

View File

@@ -1,3 +1,29 @@
2012-11-12 Christopher Faylor <me.cygwin2012@cgf.cx>
* aclocal.m4: Regenerate.
* configure: Ditto.
* autogen.sh: New script.
* configure.in: Revamp for new configury.
* Makefile.in: Revamp for new configury. Rename ALL_* to just *.
Always use "VERBOSE" setting.
(MINGW_CXX): Don't include CFLAGS in definition.
(all): Define target first, before everything else so that it is the
default.
(ps.exe): Don't add useless -lcygwin.
(ldh.exe): For consistency, add to existing MINGW_LDFLAGS rather than
redefining them.
(cygcheck.exe): Always include -lz for MINGW_LDFLAGS. Don't try to
figure out where to find it.
(dumper.exe): Simplify check. Assume libraries are installed rather
than trying to retrieve from source tree.
(install): Just use /bin/mkdir to create directories.
(Makefile): Regenerate when standard dependencies change.
* dump_setup.cc: Always include zlib.h. Remove accommodations for it
possibly not existing.
* parse_pe.cc: Add define which allows building with installed
binutils package.
* dumper.cc: Ditto.
2012-11-09 Corinna Vinschen <corinna@vinschen.de>
* path.cc (vcygpath): Handle cygdrive prefix.

View File

@@ -8,10 +8,27 @@
# Cygwin license. Please consult the file "CYGWIN_LICENSE" for
# details.
SHELL:=@SHELL@
srcdir:=@srcdir@
VPATH:=@srcdir@
target_builddir:=@target_builddir@
winsup_srcdir:=@winsup_srcdir@
configure_args=@configure_args@
export CC:=@CC@
export CXX:=@CXX@
include ${srcdir}/../Makefile.common
cygwin_build:=${target_builddir}/winsup/cygwin
cygwin_headers:=@cygwin_headers@
# environment variables used by ccwrap
export CCWRAP_HEADERS:=. ${srcdir} $(call justdir,${cygwin_headers})
export CCWRAP_SYSTEM_HEADERS:=${cygwin_headers} @newlib_headers@
export CCWRAP_DIRAFTER_HEADERS:=@windows_headers@
WINDOWS_LIBDIR:=@windows_libdir@
prefix:=@prefix@
exec_prefix:=@exec_prefix@
@@ -25,26 +42,17 @@ override INSTALL_DATA:=@INSTALL_DATA@
EXEEXT:=@EXEEXT@
EXEEXT_FOR_BUILD:=@EXEEXT_FOR_BUILD@
CC:=@CC@
CC_FOR_TARGET:=$(CC)
CXX:=@CXX@
CXX_FOR_TARGET:=$(CXX)
CFLAGS:=@CFLAGS@
CXXFLAGS:=@CXXFLAGS@
override CXXFLAGS+=-fno-exceptions -fno-rtti -DHAVE_DECL_GETOPT=0
include $(srcdir)/../Makefile.common
.SUFFIXES:
.NOEXPORT:
.PHONY: all install clean realclean warn_dumper warn_cygcheck_zlib
ALL_LDLIBS := -lnetapi32 -ladvapi32 -lkernel32 -luser32
ALL_LDFLAGS := -static-libgcc -Wl,--enable-auto-import -B$(newlib_build)/libc $(LDFLAGS) $(ALL_LDLIBS)
ALL_DEP_LDLIBS := $(cygwin_build)/libcygwin.a
LDLIBS := -lnetapi32 -ladvapi32 -lkernel32 -luser32
CYGWIN_LDFLAGS := -static-libgcc -Wl,--enable-auto-import -L${WINDOWS_LIBDIR} $(LDLIBS)
DEP_LDLIBS := $(cygwin_build)/libcygwin.a
MINGW_CXX := @MINGW_CXX@ $(CFLAGS)
MINGW_CXX := @MINGW_CXX@
# List all binaries to be linked in Cygwin mode. Each binary on this list
# must have a corresponding .o of the same name.
@@ -59,56 +67,51 @@ MINGW_BINS := ${addsuffix .exe,cygcheck cygwin-console-helper ldh strace}
# list will will be compiled in Cygwin mode implicitly, so there is no
# need for a CYGWIN_OBJS.
MINGW_OBJS := bloda.o cygcheck.o dump_setup.o ldh.o path.o strace.o
MINGW_LDFLAGS:=-L${WINDOWS_LIBDIR}
CYGCHECK_OBJS:=cygcheck.o bloda.o path.o dump_setup.o
.PHONY: all
all:
# If a binary should link in any objects besides the .o with the same
# name as the binary, then list those here.
strace.exe: path.o
cygcheck.exe: bloda.o path.o dump_setup.o
cygcheck.exe: cygcheck.o bloda.o path.o dump_setup.o
path-mount.o: path.cc
$(CXX) -c $(CXXFLAGS) -DFSTAB_ONLY -I$(updir) $< -o $@
${COMPILE.cc} -c -DFSTAB_ONLY -o $@ $<
mount.exe: path-mount.o
# Provide any necessary per-target variable overrides.
cygcheck.exe: MINGW_CXXFLAGS += -idirafter $(cygwin_source)/include -idirafter $(newlib_source)/libc/include
cygcheck.exe: MINGW_LDFLAGS += -lpsapi -lntdll
cygpath.exe: ALL_LDFLAGS += -lcygwin -luserenv -lntdll
cygpath.exe: CXXFLAGS += -fno-threadsafe-statics
ps.exe: ALL_LDFLAGS += -lcygwin -lpsapi -lntdll
cygcheck.exe: MINGW_LDFLAGS += -lpsapi -lntdll -lz
cygcheck.exe: ${CYGCHECK_OBJS}
cygpath.o: CXXFLAGS += -fno-threadsafe-statics
cygpath.exe: CYGWIN_LDFLAGS += -luserenv -lntdll
ps.exe: CYGWIN_LDFLAGS += -lpsapi -lntdll
strace.exe: MINGW_LDFLAGS += -lntdll
ldd.exe: ALL_LDFLAGS += -lpsapi
pldd.exe: ALL_LDFLAGS += -lpsapi
ldd.exe:CYGWIN_LDFLAGS += -lpsapi
pldd.exe: CYGWIN_LDFLAGS += -lpsapi
ldh.exe: MINGW_LDFLAGS := -nostdlib -lkernel32
ldh.exe: MINGW_LDFLAGS += -nostdlib -lkernel32
# Check for dumper's requirements and enable it if found.
libiconv := ${shell $(CC) --print-file-name=libiconv.a}
libbfd := ${shell $(CC) -B$(bupdir2)/bfd/ --print-file-name=libbfd.a}
libintl := ${shell $(CC) -B$(bupdir2)/intl/ --print-file-name=libintl.a}
bfdlink := $(shell ${CC} -xc /dev/null -o /dev/null -c -B${bupdir2}/bfd/ -include bfd.h 2>&1)
build_dumper := ${shell test -r $(libbfd) -a -r $(libintl) -a -n "$(libiconv)" -a -z "${bfdlink}" && echo 1}
libbfd := $(call libname,libbfd.a)
build_dumper := $(shell test -r "$(libbfd)" && echo 1)
ifdef build_dumper
CYGWIN_BINS += dumper.exe
dumper.o module_info.o parse_pe.o: CXXFLAGS += -I$(bupdir2)/bfd -I$(updir1)/include
dumper.o module_info.o parse_pe.o: CXXFLAGS += -I$(top_srcdir)/include
dumper.o parse_pe.o: dumper.h
dumper.exe: module_info.o parse_pe.o
dumper.exe: ALL_LDFLAGS += ${libbfd} ${libintl} -L$(bupdir1)/libiberty $(libiconv) -liberty -lz
dumper.exe: CYGWIN_LDFLAGS += -lbfd -lintl -liconv -liberty -lz
else
all: warn_dumper
endif
# Check for availability of a MinGW libz and enable for cygcheck.
libz:=${shell x=$$(${MINGW_CXX} --print-file-name=libz.a); cd $$(dirname $$x); dir=$$(pwd); case "$$dir" in *mingw*) echo $$dir/libz.a ;; esac}
ifdef libz
zlib_h := -include ${patsubst %/lib/libz.a,%/include/zlib.h,$(libz)}
zconf_h := ${patsubst %/zlib.h,%/zconf.h,$(zlib_h)}
dump_setup.o: MINGW_CXXFLAGS += $(zconf_h) $(zlib_h)
cygcheck.exe: MINGW_LDFLAGS += $(libz)
else
all: warn_cygcheck_zlib
endif
all: Makefile $(CYGWIN_BINS) $(MINGW_BINS)
# test harness support (note: the "MINGW_BINS +=" should come after the
@@ -127,46 +130,38 @@ check: testsuite.exe ; $(<D)/$(<F)
# the rest of this file contains generic rules
# how to compile a MinGW object
${MINGW_OBJS}: override CXX:=${MINGW_CXX}
${MINGW_OBJS}: CCWRAP_HEADERS:=${srcdir}
${MINGW_OBJS}: CCWRAP_SYSTEM_HEADERS:=
# ${MINGW_OBJS}: CCWRAP_DIRAFTER_HEADERS:=
$(MINGW_OBJS): %.o: %.cc
ifdef VERBOSE
$(MINGW_CXX) $c -o $(@D)/$(basename $@)$o $(MINGW_CXXFLAGS) $<
else
@echo $(MINGW_CXX) $c $(MINGW_CXXFLAGS) ... $(*F).cc;\
$(MINGW_CXX) $c -o $(@D)/$(basename $@)$o $(MINGW_CXXFLAGS) $<
endif
c++wrap -c -o $@ ${CXXFLAGS} $(MINGW_CXXFLAGS) $<
# how to link a MinGW binary
$(MINGW_BINS): %.exe: %.o
ifdef VERBOSE
$(MINGW_CXX) $(MINGW_CXXFLAGS) -o $@ ${filter %.o,$^} $(MINGW_LDFLAGS)
else
@echo $(MINGW_CXX) -o $@ ${filter %.o,$^} ${filter-out -B%, $(MINGW_CXXFLAGS) $(MINGW_LDFLAGS)};\
$(MINGW_CXX) $(MINGW_CXXFLAGS) -o $@ ${filter %.o,$^} $(MINGW_LDFLAGS)
endif
# how to link a Cygwin binary
$(CYGWIN_BINS): %.exe: %.o
ifdef VERBOSE
$(CXX) -o $@ ${filter %.o,$^} -B$(cygwin_build)/ $(ALL_LDFLAGS)
else
@echo $(CXX) -o $@ ${filter %.o,$^} ... ${filter-out -B%, $(ALL_LDFLAGS)};\
$(CXX) -o $@ ${filter %.o,$^} -B$(cygwin_build)/ $(ALL_LDFLAGS)
endif
${CXX} -o $@ $(filter %.o,$^) -B${cygwin_build}/ ${LDFLAGS} ${CYGWIN_LDFLAGS}
# note: how to compile a Cygwin object is covered by the pattern rule in Makefile.common
# these dependencies ensure that the required in-tree libs are built first
$(MINGW_BINS): $(ALL_DEP_LDLIBS)
$(CYGWIN_BINS): $(ALL_DEP_LDLIBS)
$(MINGW_BINS): $(DEP_LDLIBS)
$(CYGWIN_BINS): $(DEP_LDLIBS)
.PHONY: clean
clean:
rm -f *.o $(CYGWIN_BINS) $(MINGW_BINS) path-testsuite.cc testsuite.exe
.PHONY: realclean
realclean: clean
rm -f Makefile config.cache
.PHONY: install
install: all
$(SHELL) $(updir1)/mkinstalldirs $(DESTDIR)$(bindir)
/bin/mkdir -p ${DESTDIR}${bindir}
for i in $(CYGWIN_BINS) ${filter-out testsuite.exe,$(MINGW_BINS)} ; do \
n=`echo $$i | sed '$(program_transform_name)'`; \
$(INSTALL_PROGRAM) $$i $(DESTDIR)$(bindir)/$$n; \
@@ -175,6 +170,7 @@ install: all
$(cygwin_build)/libcygwin.a: $(cygwin_build)/Makefile
@$(MAKE) -C $(@D) $(@F)
.PHONY: warn_dumper
warn_dumper:
@echo '*** Not building dumper.exe since some required libraries or'
@echo '*** or headers are missing. Potential candidates are:'
@@ -183,5 +179,5 @@ warn_dumper:
@echo '*** sources from sourceware.org. Then, configure and build these'
@echo '*** libraries. Otherwise, you can safely ignore this warning.'
warn_cygcheck_zlib:
@echo '*** Building cygcheck without package content checking due to missing mingw libz.a.'
Makefile: Makefile.in config.status
/bin/sh ./config.status

View File

@@ -1,875 +1,97 @@
dnl aclocal.m4 generated automatically by aclocal 1.4-p6
# generated automatically by aclocal 1.12.1 -*- Autoconf -*-
dnl Copyright (C) 1994, 1995-8, 1999, 2001 Free Software Foundation, Inc.
dnl This file is free software; the Free Software Foundation
dnl gives unlimited permission to copy and/or distribute it,
dnl with or without modifications, as long as this notice is preserved.
# Copyright (C) 1996-2012 Free Software Foundation, Inc.
dnl This program is distributed in the hope that it will be useful,
dnl but WITHOUT ANY WARRANTY, to the extent permitted by law; without
dnl even the implied warranty of MERCHANTABILITY or FITNESS FOR A
dnl PARTICULAR PURPOSE.
# This file is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.
# lib-prefix.m4 serial 4 (gettext-0.14.2)
dnl Copyright (C) 2001-2005 Free Software Foundation, Inc.
dnl This file is free software; the Free Software Foundation
dnl gives unlimited permission to copy and/or distribute it,
dnl with or without modifications, as long as this notice is preserved.
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
# PARTICULAR PURPOSE.
dnl From Bruno Haible.
dnl AC_LIB_ARG_WITH is synonymous to AC_ARG_WITH in autoconf-2.13, and
dnl similar to AC_ARG_WITH in autoconf 2.52...2.57 except that is doesn't
dnl require excessive bracketing.
ifdef([AC_HELP_STRING],
[AC_DEFUN([AC_LIB_ARG_WITH], [AC_ARG_WITH([$1],[[$2]],[$3],[$4])])],
[AC_DEFUN([AC_][LIB_ARG_WITH], [AC_ARG_WITH([$1],[$2],[$3],[$4])])])
dnl AC_LIB_PREFIX adds to the CPPFLAGS and LDFLAGS the flags that are needed
dnl to access previously installed libraries. The basic assumption is that
dnl a user will want packages to use other packages he previously installed
dnl with the same --prefix option.
dnl This macro is not needed if only AC_LIB_LINKFLAGS is used to locate
dnl libraries, but is otherwise very convenient.
AC_DEFUN([AC_LIB_PREFIX],
[
AC_BEFORE([$0], [AC_LIB_LINKFLAGS])
AC_REQUIRE([AC_PROG_CC])
AC_REQUIRE([AC_CANONICAL_HOST])
AC_REQUIRE([AC_LIB_PREPARE_PREFIX])
dnl By default, look in $includedir and $libdir.
use_additional=yes
AC_LIB_WITH_FINAL_PREFIX([
eval additional_includedir=\"$includedir\"
eval additional_libdir=\"$libdir\"
])
AC_LIB_ARG_WITH([lib-prefix],
[ --with-lib-prefix[=DIR] search for libraries in DIR/include and DIR/lib
--without-lib-prefix don't search for libraries in includedir and libdir],
[
if test "X$withval" = "Xno"; then
use_additional=no
else
if test "X$withval" = "X"; then
AC_LIB_WITH_FINAL_PREFIX([
eval additional_includedir=\"$includedir\"
eval additional_libdir=\"$libdir\"
])
else
additional_includedir="$withval/include"
additional_libdir="$withval/lib"
fi
fi
])
if test $use_additional = yes; then
dnl Potentially add $additional_includedir to $CPPFLAGS.
dnl But don't add it
dnl 1. if it's the standard /usr/include,
dnl 2. if it's already present in $CPPFLAGS,
dnl 3. if it's /usr/local/include and we are using GCC on Linux,
dnl 4. if it doesn't exist as a directory.
if test "X$additional_includedir" != "X/usr/include"; then
haveit=
for x in $CPPFLAGS; do
AC_LIB_WITH_FINAL_PREFIX([eval x=\"$x\"])
if test "X$x" = "X-I$additional_includedir"; then
haveit=yes
break
fi
done
if test -z "$haveit"; then
if test "X$additional_includedir" = "X/usr/local/include"; then
if test -n "$GCC"; then
case $host_os in
linux* | gnu* | k*bsd*-gnu) haveit=yes;;
esac
fi
fi
if test -z "$haveit"; then
if test -d "$additional_includedir"; then
dnl Really add $additional_includedir to $CPPFLAGS.
CPPFLAGS="${CPPFLAGS}${CPPFLAGS:+ }-I$additional_includedir"
fi
fi
fi
fi
dnl Potentially add $additional_libdir to $LDFLAGS.
dnl But don't add it
dnl 1. if it's the standard /usr/lib,
dnl 2. if it's already present in $LDFLAGS,
dnl 3. if it's /usr/local/lib and we are using GCC on Linux,
dnl 4. if it doesn't exist as a directory.
if test "X$additional_libdir" != "X/usr/lib"; then
haveit=
for x in $LDFLAGS; do
AC_LIB_WITH_FINAL_PREFIX([eval x=\"$x\"])
if test "X$x" = "X-L$additional_libdir"; then
haveit=yes
break
fi
done
if test -z "$haveit"; then
if test "X$additional_libdir" = "X/usr/local/lib"; then
if test -n "$GCC"; then
case $host_os in
linux*) haveit=yes;;
esac
fi
fi
if test -z "$haveit"; then
if test -d "$additional_libdir"; then
dnl Really add $additional_libdir to $LDFLAGS.
LDFLAGS="${LDFLAGS}${LDFLAGS:+ }-L$additional_libdir"
fi
fi
fi
fi
fi
])
dnl AC_LIB_PREPARE_PREFIX creates variables acl_final_prefix,
dnl acl_final_exec_prefix, containing the values to which $prefix and
dnl $exec_prefix will expand at the end of the configure script.
AC_DEFUN([AC_LIB_PREPARE_PREFIX],
[
dnl Unfortunately, prefix and exec_prefix get only finally determined
dnl at the end of configure.
if test "X$prefix" = "XNONE"; then
acl_final_prefix="$ac_default_prefix"
else
acl_final_prefix="$prefix"
fi
if test "X$exec_prefix" = "XNONE"; then
acl_final_exec_prefix='${prefix}'
else
acl_final_exec_prefix="$exec_prefix"
fi
acl_save_prefix="$prefix"
prefix="$acl_final_prefix"
eval acl_final_exec_prefix=\"$acl_final_exec_prefix\"
prefix="$acl_save_prefix"
])
dnl AC_LIB_WITH_FINAL_PREFIX([statement]) evaluates statement, with the
dnl variables prefix and exec_prefix bound to the values they will have
dnl at the end of the configure script.
AC_DEFUN([AC_LIB_WITH_FINAL_PREFIX],
[
acl_save_prefix="$prefix"
prefix="$acl_final_prefix"
acl_save_exec_prefix="$exec_prefix"
exec_prefix="$acl_final_exec_prefix"
$1
exec_prefix="$acl_save_exec_prefix"
prefix="$acl_save_prefix"
])
# lib-link.m4 serial 6 (gettext-0.14.3)
dnl Copyright (C) 2001-2005 Free Software Foundation, Inc.
dnl This file is free software; the Free Software Foundation
dnl gives unlimited permission to copy and/or distribute it,
dnl with or without modifications, as long as this notice is preserved.
dnl From Bruno Haible.
AC_PREREQ(2.50)
dnl AC_LIB_LINKFLAGS(name [, dependencies]) searches for libname and
dnl the libraries corresponding to explicit and implicit dependencies.
dnl Sets and AC_SUBSTs the LIB${NAME} and LTLIB${NAME} variables and
dnl augments the CPPFLAGS variable.
AC_DEFUN([AC_LIB_LINKFLAGS],
[
AC_REQUIRE([AC_LIB_PREPARE_PREFIX])
AC_REQUIRE([AC_LIB_RPATH])
define([Name],[translit([$1],[./-], [___])])
define([NAME],[translit([$1],[abcdefghijklmnopqrstuvwxyz./-],
[ABCDEFGHIJKLMNOPQRSTUVWXYZ___])])
AC_CACHE_CHECK([how to link with lib[]$1], [ac_cv_lib[]Name[]_libs], [
AC_LIB_LINKFLAGS_BODY([$1], [$2])
ac_cv_lib[]Name[]_libs="$LIB[]NAME"
ac_cv_lib[]Name[]_ltlibs="$LTLIB[]NAME"
ac_cv_lib[]Name[]_cppflags="$INC[]NAME"
])
LIB[]NAME="$ac_cv_lib[]Name[]_libs"
LTLIB[]NAME="$ac_cv_lib[]Name[]_ltlibs"
INC[]NAME="$ac_cv_lib[]Name[]_cppflags"
AC_LIB_APPENDTOVAR([CPPFLAGS], [$INC]NAME)
AC_SUBST([LIB]NAME)
AC_SUBST([LTLIB]NAME)
dnl Also set HAVE_LIB[]NAME so that AC_LIB_HAVE_LINKFLAGS can reuse the
dnl results of this search when this library appears as a dependency.
HAVE_LIB[]NAME=yes
undefine([Name])
undefine([NAME])
])
dnl AC_LIB_HAVE_LINKFLAGS(name, dependencies, includes, testcode)
dnl searches for libname and the libraries corresponding to explicit and
dnl implicit dependencies, together with the specified include files and
dnl the ability to compile and link the specified testcode. If found, it
dnl sets and AC_SUBSTs HAVE_LIB${NAME}=yes and the LIB${NAME} and
dnl LTLIB${NAME} variables and augments the CPPFLAGS variable, and
dnl #defines HAVE_LIB${NAME} to 1. Otherwise, it sets and AC_SUBSTs
dnl HAVE_LIB${NAME}=no and LIB${NAME} and LTLIB${NAME} to empty.
AC_DEFUN([AC_LIB_HAVE_LINKFLAGS],
[
AC_REQUIRE([AC_LIB_PREPARE_PREFIX])
AC_REQUIRE([AC_LIB_RPATH])
define([Name],[translit([$1],[./-], [___])])
define([NAME],[translit([$1],[abcdefghijklmnopqrstuvwxyz./-],
[ABCDEFGHIJKLMNOPQRSTUVWXYZ___])])
dnl Search for lib[]Name and define LIB[]NAME, LTLIB[]NAME and INC[]NAME
dnl accordingly.
AC_LIB_LINKFLAGS_BODY([$1], [$2])
dnl Add $INC[]NAME to CPPFLAGS before performing the following checks,
dnl because if the user has installed lib[]Name and not disabled its use
dnl via --without-lib[]Name-prefix, he wants to use it.
ac_save_CPPFLAGS="$CPPFLAGS"
AC_LIB_APPENDTOVAR([CPPFLAGS], [$INC]NAME)
AC_CACHE_CHECK([for lib[]$1], [ac_cv_lib[]Name], [
ac_save_LIBS="$LIBS"
LIBS="$LIBS $LIB[]NAME"
AC_TRY_LINK([$3], [$4], [ac_cv_lib[]Name=yes], [ac_cv_lib[]Name=no])
LIBS="$ac_save_LIBS"
])
if test "$ac_cv_lib[]Name" = yes; then
HAVE_LIB[]NAME=yes
AC_DEFINE([HAVE_LIB]NAME, 1, [Define if you have the $1 library.])
AC_MSG_CHECKING([how to link with lib[]$1])
AC_MSG_RESULT([$LIB[]NAME])
else
HAVE_LIB[]NAME=no
dnl If $LIB[]NAME didn't lead to a usable library, we don't need
dnl $INC[]NAME either.
CPPFLAGS="$ac_save_CPPFLAGS"
LIB[]NAME=
LTLIB[]NAME=
fi
AC_SUBST([HAVE_LIB]NAME)
AC_SUBST([LIB]NAME)
AC_SUBST([LTLIB]NAME)
undefine([Name])
undefine([NAME])
])
dnl Determine the platform dependent parameters needed to use rpath:
dnl libext, shlibext, hardcode_libdir_flag_spec, hardcode_libdir_separator,
dnl hardcode_direct, hardcode_minus_L.
AC_DEFUN([AC_LIB_RPATH],
[
dnl Tell automake >= 1.10 to complain if config.rpath is missing.
m4_ifdef([AC_REQUIRE_AUX_FILE], [AC_REQUIRE_AUX_FILE([config.rpath])])
AC_REQUIRE([AC_PROG_CC]) dnl we use $CC, $GCC, $LDFLAGS
AC_REQUIRE([AC_LIB_PROG_LD]) dnl we use $LD, $with_gnu_ld
AC_REQUIRE([AC_CANONICAL_HOST]) dnl we use $host
AC_REQUIRE([AC_CONFIG_AUX_DIR_DEFAULT]) dnl we use $ac_aux_dir
AC_CACHE_CHECK([for shared library run path origin], acl_cv_rpath, [
CC="$CC" GCC="$GCC" LDFLAGS="$LDFLAGS" LD="$LD" with_gnu_ld="$with_gnu_ld" \
${CONFIG_SHELL-/bin/sh} "$ac_aux_dir/config.rpath" "$host" > conftest.sh
. ./conftest.sh
rm -f ./conftest.sh
acl_cv_rpath=done
])
wl="$acl_cv_wl"
libext="$acl_cv_libext"
shlibext="$acl_cv_shlibext"
hardcode_libdir_flag_spec="$acl_cv_hardcode_libdir_flag_spec"
hardcode_libdir_separator="$acl_cv_hardcode_libdir_separator"
hardcode_direct="$acl_cv_hardcode_direct"
hardcode_minus_L="$acl_cv_hardcode_minus_L"
dnl Determine whether the user wants rpath handling at all.
AC_ARG_ENABLE(rpath,
[ --disable-rpath do not hardcode runtime library paths],
:, enable_rpath=yes)
])
dnl AC_LIB_LINKFLAGS_BODY(name [, dependencies]) searches for libname and
dnl the libraries corresponding to explicit and implicit dependencies.
dnl Sets the LIB${NAME}, LTLIB${NAME} and INC${NAME} variables.
AC_DEFUN([AC_LIB_LINKFLAGS_BODY],
[
define([NAME],[translit([$1],[abcdefghijklmnopqrstuvwxyz./-],
[ABCDEFGHIJKLMNOPQRSTUVWXYZ___])])
dnl By default, look in $includedir and $libdir.
use_additional=yes
AC_LIB_WITH_FINAL_PREFIX([
eval additional_includedir=\"$includedir\"
eval additional_libdir=\"$libdir\"
])
AC_LIB_ARG_WITH([lib$1-prefix],
[ --with-lib$1-prefix[=DIR] search for lib$1 in DIR/include and DIR/lib
--without-lib$1-prefix don't search for lib$1 in includedir and libdir],
[
if test "X$withval" = "Xno"; then
use_additional=no
else
if test "X$withval" = "X"; then
AC_LIB_WITH_FINAL_PREFIX([
eval additional_includedir=\"$includedir\"
eval additional_libdir=\"$libdir\"
])
else
additional_includedir="$withval/include"
additional_libdir="$withval/lib"
fi
fi
])
dnl Search the library and its dependencies in $additional_libdir and
dnl $LDFLAGS. Using breadth-first-seach.
LIB[]NAME=
LTLIB[]NAME=
INC[]NAME=
rpathdirs=
ltrpathdirs=
names_already_handled=
names_next_round='$1 $2'
while test -n "$names_next_round"; do
names_this_round="$names_next_round"
names_next_round=
for name in $names_this_round; do
already_handled=
for n in $names_already_handled; do
if test "$n" = "$name"; then
already_handled=yes
break
fi
done
if test -z "$already_handled"; then
names_already_handled="$names_already_handled $name"
dnl See if it was already located by an earlier AC_LIB_LINKFLAGS
dnl or AC_LIB_HAVE_LINKFLAGS call.
uppername=`echo "$name" | sed -e 'y|abcdefghijklmnopqrstuvwxyz./-|ABCDEFGHIJKLMNOPQRSTUVWXYZ___|'`
eval value=\"\$HAVE_LIB$uppername\"
if test -n "$value"; then
if test "$value" = yes; then
eval value=\"\$LIB$uppername\"
test -z "$value" || LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }$value"
eval value=\"\$LTLIB$uppername\"
test -z "$value" || LTLIB[]NAME="${LTLIB[]NAME}${LTLIB[]NAME:+ }$value"
else
dnl An earlier call to AC_LIB_HAVE_LINKFLAGS has determined
dnl that this library doesn't exist. So just drop it.
:
fi
else
dnl Search the library lib$name in $additional_libdir and $LDFLAGS
dnl and the already constructed $LIBNAME/$LTLIBNAME.
found_dir=
found_la=
found_so=
found_a=
if test $use_additional = yes; then
if test -n "$shlibext" && test -f "$additional_libdir/lib$name.$shlibext"; then
found_dir="$additional_libdir"
found_so="$additional_libdir/lib$name.$shlibext"
if test -f "$additional_libdir/lib$name.la"; then
found_la="$additional_libdir/lib$name.la"
fi
else
if test -f "$additional_libdir/lib$name.$libext"; then
found_dir="$additional_libdir"
found_a="$additional_libdir/lib$name.$libext"
if test -f "$additional_libdir/lib$name.la"; then
found_la="$additional_libdir/lib$name.la"
fi
fi
fi
fi
if test "X$found_dir" = "X"; then
for x in $LDFLAGS $LTLIB[]NAME; do
AC_LIB_WITH_FINAL_PREFIX([eval x=\"$x\"])
case "$x" in
-L*)
dir=`echo "X$x" | sed -e 's/^X-L//'`
if test -n "$shlibext" && test -f "$dir/lib$name.$shlibext"; then
found_dir="$dir"
found_so="$dir/lib$name.$shlibext"
if test -f "$dir/lib$name.la"; then
found_la="$dir/lib$name.la"
fi
else
if test -f "$dir/lib$name.$libext"; then
found_dir="$dir"
found_a="$dir/lib$name.$libext"
if test -f "$dir/lib$name.la"; then
found_la="$dir/lib$name.la"
fi
fi
fi
;;
esac
if test "X$found_dir" != "X"; then
break
fi
done
fi
if test "X$found_dir" != "X"; then
dnl Found the library.
LTLIB[]NAME="${LTLIB[]NAME}${LTLIB[]NAME:+ }-L$found_dir -l$name"
if test "X$found_so" != "X"; then
dnl Linking with a shared library. We attempt to hardcode its
dnl directory into the executable's runpath, unless it's the
dnl standard /usr/lib.
if test "$enable_rpath" = no || test "X$found_dir" = "X/usr/lib"; then
dnl No hardcoding is needed.
LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }$found_so"
else
dnl Use an explicit option to hardcode DIR into the resulting
dnl binary.
dnl Potentially add DIR to ltrpathdirs.
dnl The ltrpathdirs will be appended to $LTLIBNAME at the end.
haveit=
for x in $ltrpathdirs; do
if test "X$x" = "X$found_dir"; then
haveit=yes
break
fi
done
if test -z "$haveit"; then
ltrpathdirs="$ltrpathdirs $found_dir"
fi
dnl The hardcoding into $LIBNAME is system dependent.
if test "$hardcode_direct" = yes; then
dnl Using DIR/libNAME.so during linking hardcodes DIR into the
dnl resulting binary.
LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }$found_so"
else
if test -n "$hardcode_libdir_flag_spec" && test "$hardcode_minus_L" = no; then
dnl Use an explicit option to hardcode DIR into the resulting
dnl binary.
LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }$found_so"
dnl Potentially add DIR to rpathdirs.
dnl The rpathdirs will be appended to $LIBNAME at the end.
haveit=
for x in $rpathdirs; do
if test "X$x" = "X$found_dir"; then
haveit=yes
break
fi
done
if test -z "$haveit"; then
rpathdirs="$rpathdirs $found_dir"
fi
else
dnl Rely on "-L$found_dir".
dnl But don't add it if it's already contained in the LDFLAGS
dnl or the already constructed $LIBNAME
haveit=
for x in $LDFLAGS $LIB[]NAME; do
AC_LIB_WITH_FINAL_PREFIX([eval x=\"$x\"])
if test "X$x" = "X-L$found_dir"; then
haveit=yes
break
fi
done
if test -z "$haveit"; then
LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }-L$found_dir"
fi
if test "$hardcode_minus_L" != no; then
dnl FIXME: Not sure whether we should use
dnl "-L$found_dir -l$name" or "-L$found_dir $found_so"
dnl here.
LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }$found_so"
else
dnl We cannot use $hardcode_runpath_var and LD_RUN_PATH
dnl here, because this doesn't fit in flags passed to the
dnl compiler. So give up. No hardcoding. This affects only
dnl very old systems.
dnl FIXME: Not sure whether we should use
dnl "-L$found_dir -l$name" or "-L$found_dir $found_so"
dnl here.
LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }-l$name"
fi
fi
fi
fi
else
if test "X$found_a" != "X"; then
dnl Linking with a static library.
LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }$found_a"
else
dnl We shouldn't come here, but anyway it's good to have a
dnl fallback.
LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }-L$found_dir -l$name"
fi
fi
dnl Assume the include files are nearby.
additional_includedir=
case "$found_dir" in
*/lib | */lib/)
basedir=`echo "X$found_dir" | sed -e 's,^X,,' -e 's,/lib/*$,,'`
additional_includedir="$basedir/include"
;;
esac
if test "X$additional_includedir" != "X"; then
dnl Potentially add $additional_includedir to $INCNAME.
dnl But don't add it
dnl 1. if it's the standard /usr/include,
dnl 2. if it's /usr/local/include and we are using GCC on Linux,
dnl 3. if it's already present in $CPPFLAGS or the already
dnl constructed $INCNAME,
dnl 4. if it doesn't exist as a directory.
if test "X$additional_includedir" != "X/usr/include"; then
haveit=
if test "X$additional_includedir" = "X/usr/local/include"; then
if test -n "$GCC"; then
case $host_os in
linux* | gnu* | k*bsd*-gnu) haveit=yes;;
esac
fi
fi
if test -z "$haveit"; then
for x in $CPPFLAGS $INC[]NAME; do
AC_LIB_WITH_FINAL_PREFIX([eval x=\"$x\"])
if test "X$x" = "X-I$additional_includedir"; then
haveit=yes
break
fi
done
if test -z "$haveit"; then
if test -d "$additional_includedir"; then
dnl Really add $additional_includedir to $INCNAME.
INC[]NAME="${INC[]NAME}${INC[]NAME:+ }-I$additional_includedir"
fi
fi
fi
fi
fi
dnl Look for dependencies.
if test -n "$found_la"; then
dnl Read the .la file. It defines the variables
dnl dlname, library_names, old_library, dependency_libs, current,
dnl age, revision, installed, dlopen, dlpreopen, libdir.
save_libdir="$libdir"
case "$found_la" in
*/* | *\\*) . "$found_la" ;;
*) . "./$found_la" ;;
esac
libdir="$save_libdir"
dnl We use only dependency_libs.
for dep in $dependency_libs; do
case "$dep" in
-L*)
additional_libdir=`echo "X$dep" | sed -e 's/^X-L//'`
dnl Potentially add $additional_libdir to $LIBNAME and $LTLIBNAME.
dnl But don't add it
dnl 1. if it's the standard /usr/lib,
dnl 2. if it's /usr/local/lib and we are using GCC on Linux,
dnl 3. if it's already present in $LDFLAGS or the already
dnl constructed $LIBNAME,
dnl 4. if it doesn't exist as a directory.
if test "X$additional_libdir" != "X/usr/lib"; then
haveit=
if test "X$additional_libdir" = "X/usr/local/lib"; then
if test -n "$GCC"; then
case $host_os in
linux* | gnu* | k*bsd*-gnu) haveit=yes;;
esac
fi
fi
if test -z "$haveit"; then
haveit=
for x in $LDFLAGS $LIB[]NAME; do
AC_LIB_WITH_FINAL_PREFIX([eval x=\"$x\"])
if test "X$x" = "X-L$additional_libdir"; then
haveit=yes
break
fi
done
if test -z "$haveit"; then
if test -d "$additional_libdir"; then
dnl Really add $additional_libdir to $LIBNAME.
LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }-L$additional_libdir"
fi
fi
haveit=
for x in $LDFLAGS $LTLIB[]NAME; do
AC_LIB_WITH_FINAL_PREFIX([eval x=\"$x\"])
if test "X$x" = "X-L$additional_libdir"; then
haveit=yes
break
fi
done
if test -z "$haveit"; then
if test -d "$additional_libdir"; then
dnl Really add $additional_libdir to $LTLIBNAME.
LTLIB[]NAME="${LTLIB[]NAME}${LTLIB[]NAME:+ }-L$additional_libdir"
fi
fi
fi
fi
;;
-R*)
dir=`echo "X$dep" | sed -e 's/^X-R//'`
if test "$enable_rpath" != no; then
dnl Potentially add DIR to rpathdirs.
dnl The rpathdirs will be appended to $LIBNAME at the end.
haveit=
for x in $rpathdirs; do
if test "X$x" = "X$dir"; then
haveit=yes
break
fi
done
if test -z "$haveit"; then
rpathdirs="$rpathdirs $dir"
fi
dnl Potentially add DIR to ltrpathdirs.
dnl The ltrpathdirs will be appended to $LTLIBNAME at the end.
haveit=
for x in $ltrpathdirs; do
if test "X$x" = "X$dir"; then
haveit=yes
break
fi
done
if test -z "$haveit"; then
ltrpathdirs="$ltrpathdirs $dir"
fi
fi
;;
-l*)
dnl Handle this in the next round.
names_next_round="$names_next_round "`echo "X$dep" | sed -e 's/^X-l//'`
;;
*.la)
dnl Handle this in the next round. Throw away the .la's
dnl directory; it is already contained in a preceding -L
dnl option.
names_next_round="$names_next_round "`echo "X$dep" | sed -e 's,^X.*/,,' -e 's,^lib,,' -e 's,\.la$,,'`
;;
*)
dnl Most likely an immediate library name.
LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }$dep"
LTLIB[]NAME="${LTLIB[]NAME}${LTLIB[]NAME:+ }$dep"
;;
esac
done
fi
else
dnl Didn't find the library; assume it is in the system directories
dnl known to the linker and runtime loader. (All the system
dnl directories known to the linker should also be known to the
dnl runtime loader, otherwise the system is severely misconfigured.)
LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }-l$name"
LTLIB[]NAME="${LTLIB[]NAME}${LTLIB[]NAME:+ }-l$name"
fi
fi
fi
done
done
if test "X$rpathdirs" != "X"; then
if test -n "$hardcode_libdir_separator"; then
dnl Weird platform: only the last -rpath option counts, the user must
dnl pass all path elements in one option. We can arrange that for a
dnl single library, but not when more than one $LIBNAMEs are used.
alldirs=
for found_dir in $rpathdirs; do
alldirs="${alldirs}${alldirs:+$hardcode_libdir_separator}$found_dir"
done
dnl Note: hardcode_libdir_flag_spec uses $libdir and $wl.
acl_save_libdir="$libdir"
libdir="$alldirs"
eval flag=\"$hardcode_libdir_flag_spec\"
libdir="$acl_save_libdir"
LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }$flag"
else
dnl The -rpath options are cumulative.
for found_dir in $rpathdirs; do
acl_save_libdir="$libdir"
libdir="$found_dir"
eval flag=\"$hardcode_libdir_flag_spec\"
libdir="$acl_save_libdir"
LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }$flag"
done
fi
fi
if test "X$ltrpathdirs" != "X"; then
dnl When using libtool, the option that works for both libraries and
dnl executables is -R. The -R options are cumulative.
for found_dir in $ltrpathdirs; do
LTLIB[]NAME="${LTLIB[]NAME}${LTLIB[]NAME:+ }-R$found_dir"
done
fi
])
dnl AC_LIB_APPENDTOVAR(VAR, CONTENTS) appends the elements of CONTENTS to VAR,
dnl unless already present in VAR.
dnl Works only for CPPFLAGS, not for LIB* variables because that sometimes
dnl contains two or three consecutive elements that belong together.
AC_DEFUN([AC_LIB_APPENDTOVAR],
[
for element in [$2]; do
haveit=
for x in $[$1]; do
AC_LIB_WITH_FINAL_PREFIX([eval x=\"$x\"])
if test "X$x" = "X$element"; then
haveit=yes
break
fi
done
if test -z "$haveit"; then
[$1]="${[$1]}${[$1]:+ }$element"
fi
done
])
# lib-ld.m4 serial 3 (gettext-0.13)
dnl Copyright (C) 1996-2003 Free Software Foundation, Inc.
dnl This file is free software; the Free Software Foundation
dnl gives unlimited permission to copy and/or distribute it,
dnl with or without modifications, as long as this notice is preserved.
dnl Subroutines of libtool.m4,
dnl with replacements s/AC_/AC_LIB/ and s/lt_cv/acl_cv/ to avoid collision
dnl with libtool.m4.
dnl From libtool-1.4. Sets the variable with_gnu_ld to yes or no.
AC_DEFUN([AC_LIB_PROG_LD_GNU],
[AC_CACHE_CHECK([if the linker ($LD) is GNU ld], acl_cv_prog_gnu_ld,
[# I'd rather use --version here, but apparently some GNU ld's only accept -v.
case `$LD -v 2>&1 </dev/null` in
*GNU* | *'with BFD'*)
acl_cv_prog_gnu_ld=yes ;;
*)
acl_cv_prog_gnu_ld=no ;;
esac])
with_gnu_ld=$acl_cv_prog_gnu_ld
])
dnl From libtool-1.4. Sets the variable LD.
AC_DEFUN([AC_LIB_PROG_LD],
[AC_ARG_WITH(gnu-ld,
[ --with-gnu-ld assume the C compiler uses GNU ld [default=no]],
test "$withval" = no || with_gnu_ld=yes, with_gnu_ld=no)
AC_REQUIRE([AC_PROG_CC])dnl
AC_REQUIRE([AC_CANONICAL_HOST])dnl
# Prepare PATH_SEPARATOR.
# The user is always right.
if test "${PATH_SEPARATOR+set}" != set; then
echo "#! /bin/sh" >conf$$.sh
echo "exit 0" >>conf$$.sh
chmod +x conf$$.sh
if (PATH="/nonexistent;."; conf$$.sh) >/dev/null 2>&1; then
PATH_SEPARATOR=';'
else
PATH_SEPARATOR=:
fi
rm -f conf$$.sh
fi
ac_prog=ld
if test "$GCC" = yes; then
# Check if gcc -print-prog-name=ld gives a path.
AC_MSG_CHECKING([for ld used by GCC])
case $host in
*-*-mingw*)
# gcc leaves a trailing carriage return which upsets mingw
ac_prog=`($CC -print-prog-name=ld) 2>&5 | tr -d '\015'` ;;
*)
ac_prog=`($CC -print-prog-name=ld) 2>&5` ;;
esac
case $ac_prog in
# Accept absolute paths.
[[\\/]* | [A-Za-z]:[\\/]*)]
[re_direlt='/[^/][^/]*/\.\./']
# Canonicalize the path of ld
ac_prog=`echo $ac_prog| sed 's%\\\\%/%g'`
while echo $ac_prog | grep "$re_direlt" > /dev/null 2>&1; do
ac_prog=`echo $ac_prog| sed "s%$re_direlt%/%"`
done
test -z "$LD" && LD="$ac_prog"
;;
"")
# If it fails, then pretend we aren't using GCC.
ac_prog=ld
;;
*)
# If it is relative, then search for the first ld in PATH.
with_gnu_ld=unknown
;;
esac
elif test "$with_gnu_ld" = yes; then
AC_MSG_CHECKING([for GNU ld])
else
AC_MSG_CHECKING([for non-GNU ld])
fi
AC_CACHE_VAL(acl_cv_path_LD,
[if test -z "$LD"; then
IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}${PATH_SEPARATOR-:}"
for ac_dir in $PATH; do
test -z "$ac_dir" && ac_dir=.
if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then
acl_cv_path_LD="$ac_dir/$ac_prog"
# Check to see if the program is GNU ld. I'd rather use --version,
# but apparently some GNU ld's only accept -v.
# Break only if it was the GNU/non-GNU ld that we prefer.
case `"$acl_cv_path_LD" -v 2>&1 < /dev/null` in
*GNU* | *'with BFD'*)
test "$with_gnu_ld" != no && break ;;
*)
test "$with_gnu_ld" != yes && break ;;
esac
fi
done
IFS="$ac_save_ifs"
else
acl_cv_path_LD="$LD" # Let the user override the test with a path.
fi])
LD="$acl_cv_path_LD"
if test -n "$LD"; then
AC_MSG_RESULT($LD)
else
AC_MSG_RESULT(no)
fi
test -z "$LD" && AC_MSG_ERROR([no acceptable ld found in \$PATH])
AC_LIB_PROG_LD_GNU
])
dnl This provides configure definitions used by all the winsup
dnl This provides configure definitions used by all the cygwin
dnl configure.in files.
# FIXME: We temporarily define our own version of AC_PROG_CC. This is
# copied from autoconf 2.12, but does not call AC_PROG_CC_WORKS. We
# are probably using a cross compiler, which will not be able to fully
# link an executable. This should really be fixed in autoconf
# itself.
AC_DEFUN([LIB_AC_PROG_CC_GNU],
[AC_CACHE_CHECK(whether we are using GNU C, ac_cv_prog_gcc,
[dnl The semicolon is to pacify NeXT's syntax-checking cpp.
cat > conftest.c <<EOF
#ifdef __GNUC__
yes;
#endif
EOF
if AC_TRY_COMMAND(${CC-cc} -E conftest.c) | egrep yes >/dev/null 2>&1; then
ac_cv_prog_gcc=yes
else
ac_cv_prog_gcc=no
fi])])
AC_DEFUN([LIB_AC_PROG_CC],
[AC_BEFORE([$0], [AC_PROG_CPP])dnl
AC_CHECK_TOOL(CC, gcc, gcc)
: ${CC:=gcc}
AC_PROG_CC
test -z "$CC" && AC_MSG_ERROR([no acceptable cc found in \$PATH])
AC_DEFUN([AC_WINDOWS_HEADERS],[
AC_ARG_WITH(
[windows-headers],
[AS_HELP_STRING([--with-windows-headers=DIR],
[specify where the windows includes are located])],
[test -z "$withval" && AC_MSG_ERROR([must specify value for --with-windows-headers])]
)
])
AC_DEFUN([LIB_AC_PROG_CXX],
[AC_BEFORE([$0], [AC_PROG_CPP])dnl
AC_CHECK_TOOL(CXX, g++, g++)
if test -z "$CXX"; then
AC_CHECK_TOOL(CXX, g++, c++, , , )
: ${CXX:=g++}
AC_PROG_CXX
test -z "$CC" && AC_MSG_ERROR([no acceptable cc found in \$PATH])
AC_DEFUN([AC_WINDOWS_LIBS],[
AC_ARG_WITH(
[windows-libs],
[AS_HELP_STRING([--with-windows-libs=DIR],
[specify where the windows libraries are located])],
[test -z "$withval" && AC_MSG_ERROR([must specify value for --with-windows-libs])]
)
windows_libdir=$(realdirpath "$with_windows_libs")
if test -z "$windows_libdir"; then
windows_libdir=$(realdirpath $(${ac_cv_prog_CC:-$CC} -xc /dev/null -Wl,--verbose=1 -lntdll 2>&1 | sed -rn 's%^.*\s(\S+)/libntdll\..*succeeded%\1%p'))
if test -z "$windows_libdir"; then
AC_MSG_ERROR([cannot find windows library files])
fi
fi
AC_SUBST(windows_libdir)
]
)
AC_DEFUN([AC_CYGWIN_INCLUDES], [
addto_CPPFLAGS -nostdinc
: ${ac_cv_prog_CXX:=$CXX}
: ${ac_cv_prog_CC:=$CC}
cygwin_headers=$(realdirpath "$winsup_srcdir/cygwin/include")
if test -z "$cygwin_headers"; then
AC_MSG_ERROR([cannot find $winsup_srcdir/cygwin/include directory])
fi
CXXFLAGS='$(CFLAGS)'
newlib_headers=$(realdirpath $winsup_srcdir/../newlib/libc/include)
if test -z "$newlib_headers"; then
AC_MSG_ERROR([cannot find newlib source directory: $winsup_srcdir/../newlib/libc/include])
fi
newlib_headers="$target_builddir/newlib/targ-include $newlib_headers"
if test -n "$with_windows_headers"; then
if test -e "$with_windows_headers/windef.h"; then
windows_headers="$with_windows_headers"
else
AC_MSG_ERROR([cannot find windef.h in specified --with-windows-headers path: $saw_windows_headers]);
fi
elif test -d "$winsup_srcdir/w32api/include/windef.h"; then
windows_headers="$winsup_srcdir/w32api/include"
else
windows_headers=$(cd $($ac_cv_prog_CC -xc /dev/null -E -include windef.h 2>/dev/null | sed -n 's%^# 1 "\([^"]*\)/windef\.h".*$%\1%p' | head -n1) 2>/dev/null && pwd)
if test -z "$windows_headers" -o ! -d "$windows_headers"; then
AC_MSG_ERROR([cannot find windows header files])
fi
fi
CC=$ac_cv_prog_CC
CXX=$ac_cv_prog_CXX
export CC
export CXX
AC_SUBST(windows_headers)
AC_SUBST(newlib_headers)
AC_SUBST(cygwin_headers)
])
AC_DEFUN([AC_CONFIGURE_ARGS], [
configure_args=X
for f in $ac_configure_args; do
case "$f" in
*--srcdir*) ;;
*) configure_args="$configure_args $f" ;;
esac
done
configure_args=$(/usr/bin/expr "$configure_args" : 'X \(.*\)')
AC_SUBST(configure_args)
])
AC_SUBST(target_builddir)
AC_SUBST(winsup_srcdir)

4
winsup/utils/autogen.sh Executable file
View File

@@ -0,0 +1,4 @@
#!/bin/sh -e
/usr/bin/aclocal --acdir=..
/usr/bin/autoconf -f
exec /bin/rm -rf autom4te.cache

576
winsup/utils/configure vendored
View File

@@ -1,11 +1,9 @@
#! /bin/sh
# Guess values for system-dependent variables and create Makefiles.
# Generated by GNU Autoconf 2.68.
# Generated by GNU Autoconf 2.69.
#
#
# Copyright (C) 1992, 1993, 1994, 1995, 1996, 1998, 1999, 2000, 2001,
# 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010 Free Software
# Foundation, Inc.
# Copyright (C) 1992-1996, 1998-2012 Free Software Foundation, Inc.
#
#
# This configure script is free software; the Free Software Foundation
@@ -134,6 +132,31 @@ export LANGUAGE
# CDPATH.
(unset CDPATH) >/dev/null 2>&1 && unset CDPATH
# Use a proper internal environment variable to ensure we don't fall
# into an infinite loop, continuously re-executing ourselves.
if test x"${_as_can_reexec}" != xno && test "x$CONFIG_SHELL" != x; then
_as_can_reexec=no; export _as_can_reexec;
# We cannot yet assume a decent shell, so we have to provide a
# neutralization value for shells without unset; and this also
# works around shells that cannot unset nonexistent variables.
# Preserve -v and -x to the replacement shell.
BASH_ENV=/dev/null
ENV=/dev/null
(unset BASH_ENV) >/dev/null 2>&1 && unset BASH_ENV ENV
case $- in # ((((
*v*x* | *x*v* ) as_opts=-vx ;;
*v* ) as_opts=-v ;;
*x* ) as_opts=-x ;;
* ) as_opts= ;;
esac
exec $CONFIG_SHELL $as_opts "$as_myself" ${1+"$@"}
# Admittedly, this is quite paranoid, since all the known shells bail
# out after a failed `exec'.
$as_echo "$0: could not re-execute with $CONFIG_SHELL" >&2
as_fn_exit 255
fi
# We don't want this to propagate to other subprocesses.
{ _as_can_reexec=; unset _as_can_reexec;}
if test "x$CONFIG_SHELL" = x; then
as_bourne_compatible="if test -n \"\${ZSH_VERSION+set}\" && (emulate sh) >/dev/null 2>&1; then :
emulate sh
@@ -167,7 +190,8 @@ if ( set x; as_fn_ret_success y && test x = \"\$1\" ); then :
else
exitcode=1; echo positional parameters were not saved.
fi
test x\$exitcode = x0 || exit 1"
test x\$exitcode = x0 || exit 1
test -x / || exit 1"
as_suggested=" as_lineno_1=";as_suggested=$as_suggested$LINENO;as_suggested=$as_suggested" as_lineno_1a=\$LINENO
as_lineno_2=";as_suggested=$as_suggested$LINENO;as_suggested=$as_suggested" as_lineno_2a=\$LINENO
eval 'test \"x\$as_lineno_1'\$as_run'\" != \"x\$as_lineno_2'\$as_run'\" &&
@@ -211,21 +235,25 @@ IFS=$as_save_IFS
if test "x$CONFIG_SHELL" != x; then :
# We cannot yet assume a decent shell, so we have to provide a
# neutralization value for shells without unset; and this also
# works around shells that cannot unset nonexistent variables.
# Preserve -v and -x to the replacement shell.
BASH_ENV=/dev/null
ENV=/dev/null
(unset BASH_ENV) >/dev/null 2>&1 && unset BASH_ENV ENV
export CONFIG_SHELL
case $- in # ((((
*v*x* | *x*v* ) as_opts=-vx ;;
*v* ) as_opts=-v ;;
*x* ) as_opts=-x ;;
* ) as_opts= ;;
esac
exec "$CONFIG_SHELL" $as_opts "$as_myself" ${1+"$@"}
export CONFIG_SHELL
# We cannot yet assume a decent shell, so we have to provide a
# neutralization value for shells without unset; and this also
# works around shells that cannot unset nonexistent variables.
# Preserve -v and -x to the replacement shell.
BASH_ENV=/dev/null
ENV=/dev/null
(unset BASH_ENV) >/dev/null 2>&1 && unset BASH_ENV ENV
case $- in # ((((
*v*x* | *x*v* ) as_opts=-vx ;;
*v* ) as_opts=-v ;;
*x* ) as_opts=-x ;;
* ) as_opts= ;;
esac
exec $CONFIG_SHELL $as_opts "$as_myself" ${1+"$@"}
# Admittedly, this is quite paranoid, since all the known shells bail
# out after a failed `exec'.
$as_echo "$0: could not re-execute with $CONFIG_SHELL" >&2
exit 255
fi
if test x$as_have_required = xno; then :
@@ -327,6 +355,14 @@ $as_echo X"$as_dir" |
} # as_fn_mkdir_p
# as_fn_executable_p FILE
# -----------------------
# Test if FILE is an executable regular file.
as_fn_executable_p ()
{
test -f "$1" && test -x "$1"
} # as_fn_executable_p
# as_fn_append VAR VALUE
# ----------------------
# Append the text in VALUE to the end of the definition contained in VAR. Take
@@ -448,6 +484,10 @@ as_cr_alnum=$as_cr_Letters$as_cr_digits
chmod +x "$as_me.lineno" ||
{ $as_echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2; as_fn_exit 1; }
# If we had to re-execute with $CONFIG_SHELL, we're ensured to have
# already done that, so ensure we don't try to do so again and fall
# in an infinite loop. This has already happened in practice.
_as_can_reexec=no; export _as_can_reexec
# Don't try to exec as it changes $[0], causing all sort of problems
# (the dirname of $[0] is not the place where we might find the
# original and so on. Autoconf is especially sensitive to this).
@@ -482,16 +522,16 @@ if (echo >conf$$.file) 2>/dev/null; then
# ... but there are two gotchas:
# 1) On MSYS, both `ln -s file dir' and `ln file dir' fail.
# 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable.
# In both cases, we have to default to `cp -p'.
# In both cases, we have to default to `cp -pR'.
ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe ||
as_ln_s='cp -p'
as_ln_s='cp -pR'
elif ln conf$$.file conf$$ 2>/dev/null; then
as_ln_s=ln
else
as_ln_s='cp -p'
as_ln_s='cp -pR'
fi
else
as_ln_s='cp -p'
as_ln_s='cp -pR'
fi
rm -f conf$$ conf$$.exe conf$$.dir/conf$$.file conf$$.file
rmdir conf$$.dir 2>/dev/null
@@ -503,28 +543,8 @@ else
as_mkdir_p=false
fi
if test -x / >/dev/null 2>&1; then
as_test_x='test -x'
else
if ls -dL / >/dev/null 2>&1; then
as_ls_L_option=L
else
as_ls_L_option=
fi
as_test_x='
eval sh -c '\''
if test -d "$1"; then
test -d "$1/.";
else
case $1 in #(
-*)set "./$1";;
esac;
case `ls -ld'$as_ls_L_option' "$1" 2>/dev/null` in #((
???[sx]*):;;*)false;;esac;fi
'\'' sh
'
fi
as_executable_p=$as_test_x
as_test_x='test -x'
as_executable_p=as_fn_executable_p
# Sed expression to map a string onto a valid CPP name.
as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'"
@@ -565,10 +585,14 @@ ac_unique_file="mount.cc"
ac_no_link=no
ac_subst_vars='LTLIBOBJS
LIBOBJS
configure_args
MINGW_CXX
INSTALL_DATA
INSTALL_SCRIPT
INSTALL_PROGRAM
cygwin_headers
newlib_headers
windows_headers
ac_ct_CXX
CXXFLAGS
CXX
@@ -591,6 +615,7 @@ build_os
build_vendor
build_cpu
build
windows_libdir
target_alias
host_alias
build_alias
@@ -628,10 +653,14 @@ PACKAGE_VERSION
PACKAGE_TARNAME
PACKAGE_NAME
PATH_SEPARATOR
SHELL'
SHELL
winsup_srcdir
target_builddir'
ac_subst_files=''
ac_user_opts='
enable_option_checking
with_windows_headers
with_windows_libs
'
ac_precious_vars='build_alias
host_alias
@@ -1099,8 +1128,6 @@ target=$target_alias
if test "x$host_alias" != x; then
if test "x$build_alias" = x; then
cross_compiling=maybe
$as_echo "$as_me: WARNING: if you wanted to set the --build type, don't use --host.
If a cross compiler is detected then cross compile mode will be used" >&2
elif test "x$build_alias" != "x$host_alias"; then
cross_compiling=yes
fi
@@ -1259,6 +1286,13 @@ if test -n "$ac_init_help"; then
cat <<\_ACEOF
Optional Packages:
--with-PACKAGE[=ARG] use PACKAGE [ARG=yes]
--without-PACKAGE do not use PACKAGE (same as --with-PACKAGE=no)
--with-windows-headers=DIR
specify where the windows includes are located
--with-windows-libs=DIR specify where the windows libraries are located
Some influential environment variables:
CC C compiler command
CFLAGS C compiler flags
@@ -1337,9 +1371,9 @@ test -n "$ac_init_help" && exit $ac_status
if $ac_init_version; then
cat <<\_ACEOF
configure
generated by GNU Autoconf 2.68
generated by GNU Autoconf 2.69
Copyright (C) 2010 Free Software Foundation, Inc.
Copyright (C) 2012 Free Software Foundation, Inc.
This configure script is free software; the Free Software Foundation
gives unlimited permission to copy, distribute and modify it.
_ACEOF
@@ -1430,7 +1464,7 @@ This file contains any messages produced by compilers while
running configure, to aid debugging if configure makes a mistake.
It was created by $as_me, which was
generated by GNU Autoconf 2.68. Invocation command line was
generated by GNU Autoconf 2.69. Invocation command line was
$ $0 $@
@@ -1808,6 +1842,37 @@ ac_configure="$SHELL $ac_aux_dir/configure" # Please don't use this var.
. ${srcdir}/../configure.cygwin
# Check whether --with-windows-headers was given.
if test "${with_windows_headers+set}" = set; then :
withval=$with_windows_headers; test -z "$withval" && as_fn_error $? "must specify value for --with-windows-headers" "$LINENO" 5
fi
# Check whether --with-windows-libs was given.
if test "${with_windows_libs+set}" = set; then :
withval=$with_windows_libs; test -z "$withval" && as_fn_error $? "must specify value for --with-windows-libs" "$LINENO" 5
fi
windows_libdir=$(realdirpath "$with_windows_libs")
if test -z "$windows_libdir"; then
windows_libdir=$(realdirpath $(${ac_cv_prog_CC:-$CC} -xc /dev/null -Wl,--verbose=1 -lntdll 2>&1 | sed -rn 's%^.*\s(\S+)/libntdll\..*succeeded%\1%p'))
if test -z "$windows_libdir"; then
as_fn_error $? "cannot find windows library files" "$LINENO" 5
fi
fi
# Make sure we can run config.sub.
$SHELL "$ac_aux_dir/config.sub" sun4 >/dev/null 2>&1 ||
as_fn_error $? "cannot run $SHELL $ac_aux_dir/config.sub" "$LINENO" 5
@@ -1920,99 +1985,6 @@ test -n "$target_alias" &&
program_prefix=${target_alias}-
if test -n "$ac_tool_prefix"; then
# Extract the first word of "${ac_tool_prefix}gcc", so it can be a program name with args.
set dummy ${ac_tool_prefix}gcc; ac_word=$2
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
$as_echo_n "checking for $ac_word... " >&6; }
if ${ac_cv_prog_CC+:} false; then :
$as_echo_n "(cached) " >&6
else
if test -n "$CC"; then
ac_cv_prog_CC="$CC" # Let the user override the test.
else
as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
for as_dir in $PATH
do
IFS=$as_save_IFS
test -z "$as_dir" && as_dir=.
for ac_exec_ext in '' $ac_executable_extensions; do
if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
ac_cv_prog_CC="${ac_tool_prefix}gcc"
$as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
break 2
fi
done
done
IFS=$as_save_IFS
fi
fi
CC=$ac_cv_prog_CC
if test -n "$CC"; then
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5
$as_echo "$CC" >&6; }
else
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
$as_echo "no" >&6; }
fi
fi
if test -z "$ac_cv_prog_CC"; then
ac_ct_CC=$CC
# Extract the first word of "gcc", so it can be a program name with args.
set dummy gcc; ac_word=$2
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
$as_echo_n "checking for $ac_word... " >&6; }
if ${ac_cv_prog_ac_ct_CC+:} false; then :
$as_echo_n "(cached) " >&6
else
if test -n "$ac_ct_CC"; then
ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test.
else
as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
for as_dir in $PATH
do
IFS=$as_save_IFS
test -z "$as_dir" && as_dir=.
for ac_exec_ext in '' $ac_executable_extensions; do
if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
ac_cv_prog_ac_ct_CC="gcc"
$as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
break 2
fi
done
done
IFS=$as_save_IFS
fi
fi
ac_ct_CC=$ac_cv_prog_ac_ct_CC
if test -n "$ac_ct_CC"; then
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_CC" >&5
$as_echo "$ac_ct_CC" >&6; }
else
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
$as_echo "no" >&6; }
fi
if test "x$ac_ct_CC" = x; then
CC="gcc"
else
case $cross_compiling:$ac_tool_warned in
yes:)
{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
ac_tool_warned=yes ;;
esac
CC=$ac_ct_CC
fi
else
CC="$ac_cv_prog_CC"
fi
: ${CC:=gcc}
ac_ext=c
ac_cpp='$CPP $CPPFLAGS'
ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
@@ -2035,7 +2007,7 @@ do
IFS=$as_save_IFS
test -z "$as_dir" && as_dir=.
for ac_exec_ext in '' $ac_executable_extensions; do
if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
ac_cv_prog_CC="${ac_tool_prefix}gcc"
$as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
break 2
@@ -2075,7 +2047,7 @@ do
IFS=$as_save_IFS
test -z "$as_dir" && as_dir=.
for ac_exec_ext in '' $ac_executable_extensions; do
if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
ac_cv_prog_ac_ct_CC="gcc"
$as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
break 2
@@ -2128,7 +2100,7 @@ do
IFS=$as_save_IFS
test -z "$as_dir" && as_dir=.
for ac_exec_ext in '' $ac_executable_extensions; do
if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
ac_cv_prog_CC="${ac_tool_prefix}cc"
$as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
break 2
@@ -2169,7 +2141,7 @@ do
IFS=$as_save_IFS
test -z "$as_dir" && as_dir=.
for ac_exec_ext in '' $ac_executable_extensions; do
if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
if test "$as_dir/$ac_word$ac_exec_ext" = "/usr/ucb/cc"; then
ac_prog_rejected=yes
continue
@@ -2227,7 +2199,7 @@ do
IFS=$as_save_IFS
test -z "$as_dir" && as_dir=.
for ac_exec_ext in '' $ac_executable_extensions; do
if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
ac_cv_prog_CC="$ac_tool_prefix$ac_prog"
$as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
break 2
@@ -2271,7 +2243,7 @@ do
IFS=$as_save_IFS
test -z "$as_dir" && as_dir=.
for ac_exec_ext in '' $ac_executable_extensions; do
if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
ac_cv_prog_ac_ct_CC="$ac_prog"
$as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
break 2
@@ -2793,8 +2765,7 @@ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
/* end confdefs.h. */
#include <stdarg.h>
#include <stdio.h>
#include <sys/types.h>
#include <sys/stat.h>
struct stat;
/* Most of the following tests are stolen from RCS 5.7's src/conf.sh. */
struct buf { int x; };
FILE * (*rcsopen) (struct buf *, struct stat *, int);
@@ -2879,195 +2850,7 @@ ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
ac_compiler_gnu=$ac_cv_c_compiler_gnu
test -z "$CC" && as_fn_error $? "no acceptable cc found in \$PATH" "$LINENO" 5
if test -n "$ac_tool_prefix"; then
# Extract the first word of "${ac_tool_prefix}g++", so it can be a program name with args.
set dummy ${ac_tool_prefix}g++; ac_word=$2
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
$as_echo_n "checking for $ac_word... " >&6; }
if ${ac_cv_prog_CXX+:} false; then :
$as_echo_n "(cached) " >&6
else
if test -n "$CXX"; then
ac_cv_prog_CXX="$CXX" # Let the user override the test.
else
as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
for as_dir in $PATH
do
IFS=$as_save_IFS
test -z "$as_dir" && as_dir=.
for ac_exec_ext in '' $ac_executable_extensions; do
if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
ac_cv_prog_CXX="${ac_tool_prefix}g++"
$as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
break 2
fi
done
done
IFS=$as_save_IFS
fi
fi
CXX=$ac_cv_prog_CXX
if test -n "$CXX"; then
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $CXX" >&5
$as_echo "$CXX" >&6; }
else
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
$as_echo "no" >&6; }
fi
fi
if test -z "$ac_cv_prog_CXX"; then
ac_ct_CXX=$CXX
# Extract the first word of "g++", so it can be a program name with args.
set dummy g++; ac_word=$2
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
$as_echo_n "checking for $ac_word... " >&6; }
if ${ac_cv_prog_ac_ct_CXX+:} false; then :
$as_echo_n "(cached) " >&6
else
if test -n "$ac_ct_CXX"; then
ac_cv_prog_ac_ct_CXX="$ac_ct_CXX" # Let the user override the test.
else
as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
for as_dir in $PATH
do
IFS=$as_save_IFS
test -z "$as_dir" && as_dir=.
for ac_exec_ext in '' $ac_executable_extensions; do
if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
ac_cv_prog_ac_ct_CXX="g++"
$as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
break 2
fi
done
done
IFS=$as_save_IFS
fi
fi
ac_ct_CXX=$ac_cv_prog_ac_ct_CXX
if test -n "$ac_ct_CXX"; then
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_CXX" >&5
$as_echo "$ac_ct_CXX" >&6; }
else
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
$as_echo "no" >&6; }
fi
if test "x$ac_ct_CXX" = x; then
CXX="g++"
else
case $cross_compiling:$ac_tool_warned in
yes:)
{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
ac_tool_warned=yes ;;
esac
CXX=$ac_ct_CXX
fi
else
CXX="$ac_cv_prog_CXX"
fi
if test -z "$CXX"; then
if test -n "$ac_tool_prefix"; then
# Extract the first word of "${ac_tool_prefix}g++", so it can be a program name with args.
set dummy ${ac_tool_prefix}g++; ac_word=$2
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
$as_echo_n "checking for $ac_word... " >&6; }
if ${ac_cv_prog_CXX+:} false; then :
$as_echo_n "(cached) " >&6
else
if test -n "$CXX"; then
ac_cv_prog_CXX="$CXX" # Let the user override the test.
else
as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
for as_dir in $PATH
do
IFS=$as_save_IFS
test -z "$as_dir" && as_dir=.
for ac_exec_ext in '' $ac_executable_extensions; do
if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
ac_cv_prog_CXX="${ac_tool_prefix}g++"
$as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
break 2
fi
done
done
IFS=$as_save_IFS
fi
fi
CXX=$ac_cv_prog_CXX
if test -n "$CXX"; then
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $CXX" >&5
$as_echo "$CXX" >&6; }
else
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
$as_echo "no" >&6; }
fi
fi
if test -z "$ac_cv_prog_CXX"; then
ac_ct_CXX=$CXX
# Extract the first word of "g++", so it can be a program name with args.
set dummy g++; ac_word=$2
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
$as_echo_n "checking for $ac_word... " >&6; }
if ${ac_cv_prog_ac_ct_CXX+:} false; then :
$as_echo_n "(cached) " >&6
else
if test -n "$ac_ct_CXX"; then
ac_cv_prog_ac_ct_CXX="$ac_ct_CXX" # Let the user override the test.
else
as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
for as_dir in $PATH
do
IFS=$as_save_IFS
test -z "$as_dir" && as_dir=.
for ac_exec_ext in '' $ac_executable_extensions; do
if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
ac_cv_prog_ac_ct_CXX="g++"
$as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
break 2
fi
done
done
IFS=$as_save_IFS
fi
fi
ac_ct_CXX=$ac_cv_prog_ac_ct_CXX
if test -n "$ac_ct_CXX"; then
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_CXX" >&5
$as_echo "$ac_ct_CXX" >&6; }
else
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
$as_echo "no" >&6; }
fi
if test "x$ac_ct_CXX" = x; then
CXX="c++"
else
case $cross_compiling:$ac_tool_warned in
yes:)
{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
ac_tool_warned=yes ;;
esac
CXX=$ac_ct_CXX
fi
else
CXX="$ac_cv_prog_CXX"
fi
: ${CXX:=g++}
ac_ext=cpp
ac_ext=cpp
ac_cpp='$CXXCPP $CPPFLAGS'
ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5'
ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
@@ -3095,7 +2878,7 @@ do
IFS=$as_save_IFS
test -z "$as_dir" && as_dir=.
for ac_exec_ext in '' $ac_executable_extensions; do
if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
ac_cv_prog_CXX="$ac_tool_prefix$ac_prog"
$as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
break 2
@@ -3139,7 +2922,7 @@ do
IFS=$as_save_IFS
test -z "$as_dir" && as_dir=.
for ac_exec_ext in '' $ac_executable_extensions; do
if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
ac_cv_prog_ac_ct_CXX="$ac_prog"
$as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
break 2
@@ -3324,10 +3107,44 @@ ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
ac_compiler_gnu=$ac_cv_c_compiler_gnu
test -z "$CC" && as_fn_error $? "no acceptable cc found in \$PATH" "$LINENO" 5
addto_CPPFLAGS -nostdinc
: ${ac_cv_prog_CXX:=$CXX}
: ${ac_cv_prog_CC:=$CC}
cygwin_headers=$(realdirpath "$winsup_srcdir/cygwin/include")
if test -z "$cygwin_headers"; then
as_fn_error $? "cannot find $winsup_srcdir/cygwin/include directory" "$LINENO" 5
fi
CXXFLAGS='$(CFLAGS)'
newlib_headers=$(realdirpath $winsup_srcdir/../newlib/libc/include)
if test -z "$newlib_headers"; then
as_fn_error $? "cannot find newlib source directory: $winsup_srcdir/../newlib/libc/include" "$LINENO" 5
fi
newlib_headers="$target_builddir/newlib/targ-include $newlib_headers"
if test -n "$with_windows_headers"; then
if test -e "$with_windows_headers/windef.h"; then
windows_headers="$with_windows_headers"
else
as_fn_error $? "cannot find windef.h in specified --with-windows-headers path: $saw_windows_headers" "$LINENO" 5;
fi
elif test -d "$winsup_srcdir/w32api/include/windef.h"; then
windows_headers="$winsup_srcdir/w32api/include"
else
windows_headers=$(cd $($ac_cv_prog_CC -xc /dev/null -E -include windef.h 2>/dev/null | sed -n 's%^# 1 "\([^"]*\)/windef\.h".*$%\1%p' | head -n1) 2>/dev/null && pwd)
if test -z "$windows_headers" -o ! -d "$windows_headers"; then
as_fn_error $? "cannot find windows header files" "$LINENO" 5
fi
fi
CC=$ac_cv_prog_CC
CXX=$ac_cv_prog_CXX
export CC
export CXX
test "$program_prefix" != NONE &&
@@ -3341,8 +3158,6 @@ ac_script='s/[\\$]/&&/g;s/;s,x,x,$//'
program_transform_name=`$as_echo "$program_transform_name" | sed "$ac_script"`
INSTALL="/bin/sh "`cd $srcdir/../..; echo $(pwd)/install-sh -c`
# Find a good install program. We prefer a C program (faster),
# so one script is as good as another. But avoid the broken or
# incompatible versions:
@@ -3380,7 +3195,7 @@ case $as_dir/ in #((
# by default.
for ac_prog in ginstall scoinst install; do
for ac_exec_ext in '' $ac_executable_extensions; do
if { test -f "$as_dir/$ac_prog$ac_exec_ext" && $as_test_x "$as_dir/$ac_prog$ac_exec_ext"; }; then
if as_fn_executable_p "$as_dir/$ac_prog$ac_exec_ext"; then
if test $ac_prog = install &&
grep dspmsg "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then
# AIX install. It has an incompatible calling convention.
@@ -3455,7 +3270,7 @@ do
IFS=$as_save_IFS
test -z "$as_dir" && as_dir=.
for ac_exec_ext in '' $ac_executable_extensions; do
if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
ac_cv_prog_MINGW_CXX="$ac_prog"
$as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
break 2
@@ -3479,7 +3294,18 @@ fi
test -n "$MINGW_CXX" && break
done
test -z "$MINGW_CXX" && as_fn_error $? "no acceptable mingw g++ found in \$PATH" "$LINENO" 5
test -n "$MINGW_CXX" || as_fn_error $? "no acceptable mingw g++ found in \$PATH" "$LINENO" 5
configure_args=X
for f in $ac_configure_args; do
case "$f" in
*--srcdir*) ;;
*) configure_args="$configure_args $f" ;;
esac
done
configure_args=$(/usr/bin/expr "$configure_args" : 'X \(.*\)')
ac_config_files="$ac_config_files Makefile"
@@ -3927,16 +3753,16 @@ if (echo >conf$$.file) 2>/dev/null; then
# ... but there are two gotchas:
# 1) On MSYS, both `ln -s file dir' and `ln file dir' fail.
# 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable.
# In both cases, we have to default to `cp -p'.
# In both cases, we have to default to `cp -pR'.
ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe ||
as_ln_s='cp -p'
as_ln_s='cp -pR'
elif ln conf$$.file conf$$ 2>/dev/null; then
as_ln_s=ln
else
as_ln_s='cp -p'
as_ln_s='cp -pR'
fi
else
as_ln_s='cp -p'
as_ln_s='cp -pR'
fi
rm -f conf$$ conf$$.exe conf$$.dir/conf$$.file conf$$.file
rmdir conf$$.dir 2>/dev/null
@@ -3996,28 +3822,16 @@ else
as_mkdir_p=false
fi
if test -x / >/dev/null 2>&1; then
as_test_x='test -x'
else
if ls -dL / >/dev/null 2>&1; then
as_ls_L_option=L
else
as_ls_L_option=
fi
as_test_x='
eval sh -c '\''
if test -d "$1"; then
test -d "$1/.";
else
case $1 in #(
-*)set "./$1";;
esac;
case `ls -ld'$as_ls_L_option' "$1" 2>/dev/null` in #((
???[sx]*):;;*)false;;esac;fi
'\'' sh
'
fi
as_executable_p=$as_test_x
# as_fn_executable_p FILE
# -----------------------
# Test if FILE is an executable regular file.
as_fn_executable_p ()
{
test -f "$1" && test -x "$1"
} # as_fn_executable_p
as_test_x='test -x'
as_executable_p=as_fn_executable_p
# Sed expression to map a string onto a valid CPP name.
as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'"
@@ -4039,7 +3853,7 @@ cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
# values after options handling.
ac_log="
This file was extended by $as_me, which was
generated by GNU Autoconf 2.68. Invocation command line was
generated by GNU Autoconf 2.69. Invocation command line was
CONFIG_FILES = $CONFIG_FILES
CONFIG_HEADERS = $CONFIG_HEADERS
@@ -4092,10 +3906,10 @@ cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
ac_cs_config="`$as_echo "$ac_configure_args" | sed 's/^ //; s/[\\""\`\$]/\\\\&/g'`"
ac_cs_version="\\
config.status
configured by $0, generated by GNU Autoconf 2.68,
configured by $0, generated by GNU Autoconf 2.69,
with options \\"\$ac_cs_config\\"
Copyright (C) 2010 Free Software Foundation, Inc.
Copyright (C) 2012 Free Software Foundation, Inc.
This config.status script is free software; the Free Software Foundation
gives unlimited permission to copy, distribute and modify it."
@@ -4173,7 +3987,7 @@ fi
_ACEOF
cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
if \$ac_cs_recheck; then
set X '$SHELL' '$0' $ac_configure_args \$ac_configure_extra_args --no-create --no-recursion
set X $SHELL '$0' $ac_configure_args \$ac_configure_extra_args --no-create --no-recursion
shift
\$as_echo "running CONFIG_SHELL=$SHELL \$*" >&6
CONFIG_SHELL='$SHELL'

View File

@@ -14,19 +14,26 @@ AC_INIT(mount.cc)
AC_CONFIG_AUX_DIR(../..)
AC_NO_EXECUTABLES
. ${srcdir}/../configure.cygwin
AC_WINDOWS_HEADERS
AC_WINDOWS_LIBS
AC_CANONICAL_SYSTEM
LIB_AC_PROG_CC
LIB_AC_PROG_CXX
AC_PROG_CC
AC_PROG_CXX
AC_CYGWIN_INCLUDES
AC_ARG_PROGRAM
INSTALL="/bin/sh "`cd $srcdir/../..; echo $(pwd)/install-sh -c`
AC_PROG_INSTALL
AC_CHECK_PROGS(MINGW_CXX, ${target_cpu}-w64-mingw32-g++)
test -z "$MINGW_CXX" && AC_MSG_ERROR([no acceptable mingw g++ found in \$PATH])
test -n "$MINGW_CXX" || AC_MSG_ERROR([no acceptable mingw g++ found in \$PATH])
AC_EXEEXT
AC_CONFIGURE_ARGS
AC_OUTPUT(Makefile)

View File

@@ -28,15 +28,7 @@ details. */
# include <ntstatus.h>
#endif
#include "path.h"
#if 0
#include "zlib.h"
#endif
#ifndef ZLIB_VERSION
typedef void * gzFile;
#define gzgets(fp, buf, size) ({0;})
#define gzclose(fp) ({0;})
#endif
#include <zlib.h>
static int package_len = 20;
static unsigned int version_len = 10;

View File

@@ -21,6 +21,7 @@
Foundation, Inc., 51 Franklin Street - Fifth Floor, Boston, MA 02110-1301, USA. */
#include <ansidecl.h>
#define PACKAGE
#include <bfd.h>
#include <elf/common.h>
#include <elf/external.h>

View File

@@ -20,6 +20,7 @@
along with this program; if not, write to the Free Software
Foundation, Inc., 51 Franklin Street - Fifth Floor, Boston, MA 02110-1301, USA. */
#define PACKAGE
#include <bfd.h>
#include <stdio.h>
#include <stdlib.h>

View File

@@ -13,9 +13,9 @@ details. */
#include <windows.h>
#ifndef __MINGW64_VERSION_MAJOR
#include "ddk/ntapi.h"
# include "ddk/ntapi.h"
#else
#include <winternl.h>
# include <winternl.h>
#endif
#define cygwin_internal cygwin_internal_dontuse
#include <stdio.h>