Add MMIX support

include/ChangeLog

@@ -1,3 +1,7 @@
+2001-10-30  Hans-Peter Nilsson  <hp@bitrange.com>
+
+	* dis-asm.h (print_insn_mmix): Add prototype.
+
 2001-10-24  Neil Booth  <neil@daikokuya.demon.co.uk>
 
 	* include/safe-ctype.h (_sch_isbasic, IS_ISOBASIC): New.

include/dis-asm.h

@@ -145,8 +145,7 @@ typedef struct disassemble_info {
   enum bfd_endian display_endian;
 
   /* Number of octets per incremented target address 
-     Normally one, but some DSPs have byte sizes of 16 or 32 bits
+     Normally one, but some DSPs have byte sizes of 16 or 32 bits.  */
-   */
   unsigned int octets_per_byte;
 
   /* Results from instruction decoders.  Not all decoders yet support
@@ -192,41 +191,43 @@ extern int print_insn_h8300h		PARAMS ((bfd_vma, disassemble_info*));
 extern int print_insn_h8300s		PARAMS ((bfd_vma, disassemble_info*));
 extern int print_insn_h8500		PARAMS ((bfd_vma, disassemble_info*));
 extern int print_insn_alpha		PARAMS ((bfd_vma, disassemble_info*));
-extern disassembler_ftype arc_get_disassembler PARAMS ((void *));
 extern int print_insn_big_arm		PARAMS ((bfd_vma, disassemble_info*));
 extern int print_insn_little_arm	PARAMS ((bfd_vma, disassemble_info*));
 extern int print_insn_sparc		PARAMS ((bfd_vma, disassemble_info*));
 extern int print_insn_big_a29k		PARAMS ((bfd_vma, disassemble_info*));
 extern int print_insn_little_a29k	PARAMS ((bfd_vma, disassemble_info*));
+extern int print_insn_avr		PARAMS ((bfd_vma, disassemble_info*));
+extern int print_insn_d10v		PARAMS ((bfd_vma, disassemble_info*));
+extern int print_insn_d30v		PARAMS ((bfd_vma, disassemble_info*));
+extern int print_insn_fr30		PARAMS ((bfd_vma, disassemble_info*));
+extern int print_insn_hppa		PARAMS ((bfd_vma, disassemble_info*));
 extern int print_insn_i860		PARAMS ((bfd_vma, disassemble_info*));
 extern int print_insn_i960		PARAMS ((bfd_vma, disassemble_info*));
-extern int print_insn_sh		PARAMS ((bfd_vma, disassemble_info*));
-extern int print_insn_shl		PARAMS ((bfd_vma, disassemble_info*));
-extern int print_insn_hppa		PARAMS ((bfd_vma, disassemble_info*));
-extern int print_insn_fr30		PARAMS ((bfd_vma, disassemble_info*));
 extern int print_insn_m32r		PARAMS ((bfd_vma, disassemble_info*));
 extern int print_insn_m88k		PARAMS ((bfd_vma, disassemble_info*));
 extern int print_insn_mcore		PARAMS ((bfd_vma, disassemble_info*));
+extern int print_insn_mmix		PARAMS ((bfd_vma, disassemble_info*));
 extern int print_insn_mn10200		PARAMS ((bfd_vma, disassemble_info*));
 extern int print_insn_mn10300		PARAMS ((bfd_vma, disassemble_info*));
 extern int print_insn_ns32k		PARAMS ((bfd_vma, disassemble_info*));
 extern int print_insn_openrisc		PARAMS ((bfd_vma, disassemble_info*));
 extern int print_insn_pdp11		PARAMS ((bfd_vma, disassemble_info*));
+extern int print_insn_pj		PARAMS ((bfd_vma, disassemble_info*));
 extern int print_insn_big_powerpc	PARAMS ((bfd_vma, disassemble_info*));
 extern int print_insn_little_powerpc	PARAMS ((bfd_vma, disassemble_info*));
 extern int print_insn_rs6000		PARAMS ((bfd_vma, disassemble_info*));
-extern int print_insn_w65		PARAMS ((bfd_vma, disassemble_info*));
+extern int print_insn_s390              PARAMS ((bfd_vma, disassemble_info*)); 
-extern disassembler_ftype cris_get_disassembler PARAMS ((bfd *));
+extern int print_insn_sh		PARAMS ((bfd_vma, disassemble_info*));
-extern int print_insn_d10v		PARAMS ((bfd_vma, disassemble_info*));
+extern int print_insn_shl		PARAMS ((bfd_vma, disassemble_info*));
-extern int print_insn_d30v		PARAMS ((bfd_vma, disassemble_info*));
-extern int print_insn_v850		PARAMS ((bfd_vma, disassemble_info*));
 extern int print_insn_tic30		PARAMS ((bfd_vma, disassemble_info*));
-extern int print_insn_vax		PARAMS ((bfd_vma, disassemble_info*));
 extern int print_insn_tic54x		PARAMS ((bfd_vma, disassemble_info*));
 extern int print_insn_tic80		PARAMS ((bfd_vma, disassemble_info*));
-extern int print_insn_pj		PARAMS ((bfd_vma, disassemble_info*));
+extern int print_insn_v850		PARAMS ((bfd_vma, disassemble_info*));
-extern int print_insn_avr		PARAMS ((bfd_vma, disassemble_info*));
+extern int print_insn_vax		PARAMS ((bfd_vma, disassemble_info*));
-extern int print_insn_s390            PARAMS ((bfd_vma, disassemble_info*)); 
+extern int print_insn_w65		PARAMS ((bfd_vma, disassemble_info*));
+
+extern disassembler_ftype arc_get_disassembler PARAMS ((void *));
+extern disassembler_ftype cris_get_disassembler PARAMS ((bfd *));
 
 extern void print_arm_disassembler_options PARAMS ((FILE *));
 extern void parse_arm_disassembler_option  PARAMS ((char *));

include/elf/ChangeLog

@@ -1,3 +1,7 @@
+2001-10-30  Hans-Peter Nilsson  <hp@bitrange.com>
+
+	* mmix.h: New file.
+
 2001-10-23  Alan Modra  <amodra@bigpond.net.au>
 
 	* internal.h: White space changes to keep lines under 80 chars.

include/elf/mmix.h

@@ -0,0 +1,151 @@
+/* MMIX support for BFD.
+   Copyright (C) 2001 Free Software Foundation, Inc.
+
+This file is part of BFD, the Binary File Descriptor library.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+/* This file holds definitions specific to the MMIX ELF ABI. */
+#ifndef ELF_MMIX_H
+#define ELF_MMIX_H
+
+#include "elf/reloc-macros.h"
+
+/* Relocations.  */
+START_RELOC_NUMBERS (elf_mmix_reloc_type)
+  RELOC_NUMBER (R_MMIX_NONE, 0)
+
+  /* Standard absolute relocations.  */
+  RELOC_NUMBER (R_MMIX_8, 1)
+  RELOC_NUMBER (R_MMIX_16, 2)
+  RELOC_NUMBER (R_MMIX_24, 3)
+  RELOC_NUMBER (R_MMIX_32, 4)
+  RELOC_NUMBER (R_MMIX_64, 5)
+
+  /* Standard relative relocations.  */
+  RELOC_NUMBER (R_MMIX_PC_8, 6)
+  RELOC_NUMBER (R_MMIX_PC_16, 7)
+  RELOC_NUMBER (R_MMIX_PC_24, 8)
+  RELOC_NUMBER (R_MMIX_PC_32, 9)
+  RELOC_NUMBER (R_MMIX_PC_64, 10)
+
+  /* GNU extensions for C++ vtables.  */
+  RELOC_NUMBER (R_MMIX_GNU_VTINHERIT, 11)
+  RELOC_NUMBER (R_MMIX_GNU_VTENTRY, 12)
+
+  /* A GETA instruction.  */
+  RELOC_NUMBER (R_MMIX_GETA, 13)
+  RELOC_NUMBER (R_MMIX_GETA_1, 14)
+  RELOC_NUMBER (R_MMIX_GETA_2, 15)
+  RELOC_NUMBER (R_MMIX_GETA_3, 16)
+
+  /* A conditional branch instruction.  */
+  RELOC_NUMBER (R_MMIX_CBRANCH, 17)
+  RELOC_NUMBER (R_MMIX_CBRANCH_J, 18)
+  RELOC_NUMBER (R_MMIX_CBRANCH_1, 19)
+  RELOC_NUMBER (R_MMIX_CBRANCH_2, 20)
+  RELOC_NUMBER (R_MMIX_CBRANCH_3, 21)
+
+  /* A PUSHJ instruction.  */
+  RELOC_NUMBER (R_MMIX_PUSHJ, 22)
+  RELOC_NUMBER (R_MMIX_PUSHJ_1, 23)
+  RELOC_NUMBER (R_MMIX_PUSHJ_2, 24)
+  RELOC_NUMBER (R_MMIX_PUSHJ_3, 25)
+
+  /* A JMP instruction.  */
+  RELOC_NUMBER (R_MMIX_JMP, 26)
+  RELOC_NUMBER (R_MMIX_JMP_1, 27)
+  RELOC_NUMBER (R_MMIX_JMP_2, 28)
+  RELOC_NUMBER (R_MMIX_JMP_3, 29)
+
+  /* A relative address such as in a GETA or a branch.  */
+  RELOC_NUMBER (R_MMIX_ADDR19, 30)
+
+  /* A relative address such as in a JMP (only).  */
+  RELOC_NUMBER (R_MMIX_ADDR27, 31)
+
+  /* A general register or a number 0..255.  */
+  RELOC_NUMBER (R_MMIX_REG_OR_BYTE, 32)
+
+  /* A general register. */
+  RELOC_NUMBER (R_MMIX_REG, 33)
+
+  /* A global register and an offset, equivalent of the expression.  */
+  RELOC_NUMBER (R_MMIX_BASE_PLUS_OFFSET, 34)
+
+  /* A LOCAL assertion.  */
+  RELOC_NUMBER (R_MMIX_LOCAL, 35)
+END_RELOC_NUMBERS (R_MMIX_max)
+
+
+/* Section Attributes.  */
+/* A section containing necessary information for relaxation.  */
+#define SHF_MMIX_CANRELAX	0x80000000
+
+/* Symbol attributes.  */
+/* A symbol with this section-index is a register.  */
+#define SHN_REGISTER	SHN_LOPROC
+
+/* This section holds contents for each initialized register, at VMA
+   regno*8.  A symbol relative to this section will be transformed to an
+   absolute symbol with the value corresponding to the register number at
+   final link time.  A symbol with a value outside the inclusive range
+   32*8 .. 254*8 is an error.  It is highly recommended to only use an
+   upper bound of 253*8 or lower as specified in the (currently
+   unspecified) ABI.  */
+#define MMIX_REG_CONTENTS_SECTION_NAME ".MMIX.reg_contents"
+
+/* This is a faked section holding symbols with SHN_REGISTER.  Don't
+   confuse it with MMIX_REG_CONTENTS_SECTION_NAME; this one has no
+   contents, just values.  It is an error for a value in this section to
+   be outside the range 32..255 and it must never become an actual section
+   in an object file.  */
+#define MMIX_REG_SECTION_NAME "*REG*"
+
+/* Appended with a number N=0..65535, this is a representation of the
+   mmixal "BSPEC N" ... "ESPEC" directive pair; the contents go into an
+   ELF section by name ".MMIX.spec_data.N".  */
+#define MMIX_OTHER_SPEC_SECTION_PREFIX ".MMIX.spec_data."
+
+/* A section SECNAME is noted to start at "__.MMIX.start.SECNAME" by the
+   presence of this symbol.  Currently only implemented for ".text"
+   through the symbol "__.MMIX.start..text".  */
+#define MMIX_LOC_SECTION_START_SYMBOL_PREFIX "__.MMIX.start."
+
+/* This symbol is always a function.  */
+#define MMIX_START_SYMBOL_NAME "Main"
+
+
+/* We smuggle in a few MMO specifics here.  We don't make a specific MMO
+   file, since we can't reasonably support MMO without ELF; we have to
+   include this file anyway.  */
+
+#define MMO_TEXT_SECTION_NAME ".text"
+#define MMO_DATA_SECTION_NAME ".data"
+
+/* A definition for the flags we put in spec data in files.  A copy of our
+   own of some flags to keep immune to BFD flag changes.  See section.c of
+   2001-07-18 for flag documentation.  */
+#define MMO_SEC_ALLOC      0x001
+#define MMO_SEC_LOAD       0x002
+#define MMO_SEC_RELOC      0x004
+#define MMO_SEC_READONLY   0x010
+#define MMO_SEC_CODE       0x020
+#define MMO_SEC_DATA       0x040
+#define MMO_SEC_NEVER_LOAD 0x400
+#define MMO_SEC_IS_COMMON 0x8000
+#define MMO_SEC_DEBUGGING 0x10000
+
+#endif /* ELF_MMIX_H */

include/opcode/ChangeLog

@@ -1,3 +1,7 @@
+2001-10-30  Hans-Peter Nilsson  <hp@bitrange.com>
+
+	* mmix.h: New file.
+
 2001-10-18  Chris Demetriou  <cgd@broadcom.com>
 
 	* mips.h (OPCODE_IS_MEMBER): Add a no-op term to the end

include/opcode/mmix.h

@@ -0,0 +1,185 @@
+/* mmix.h -- Header file for MMIX opcode table
+   Copyright (C) 2001 Free Software Foundation, Inc.
+   Written by Hans-Peter Nilsson (hp@bitrange.com)
+
+This file is part of GDB, GAS, and the GNU binutils.
+
+GDB, GAS, and the GNU binutils are free software; you can redistribute
+them and/or modify them under the terms of the GNU General Public
+License as published by the Free Software Foundation; either version 2,
+or (at your option) any later version.
+
+GDB, GAS, and the GNU binutils are distributed in the hope that they
+will be useful, but WITHOUT ANY WARRANTY; without even the implied
+warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See
+the GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this file; see the file COPYING.  If not, write to the Free
+Software Foundation, 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+/* We could have just a char*[] table indexed by the register number, but
+   that would not allow for synonyms.  The table is terminated with an
+   entry with a NULL name.  */
+struct mmix_spec_reg
+{
+  const char *name;
+  unsigned int number;
+};
+
+/* General indication of the type of instruction.  */
+enum mmix_insn_type
+ {
+   mmix_type_pseudo,
+   mmix_type_normal,
+   mmix_type_branch,
+   mmix_type_condbranch,
+   mmix_type_memaccess_octa,
+   mmix_type_memaccess_tetra,
+   mmix_type_memaccess_wyde,
+   mmix_type_memaccess_byte,
+   mmix_type_memaccess_block,
+   mmix_type_jsr
+ };
+
+/* Type of operands an instruction takes.  Use when parsing assembly code
+   and disassembling.  */
+enum mmix_operands_type
+ {
+   mmix_operands_none = 0,
+
+   /* All operands are registers: "$X,$Y,$Z".  */
+   mmix_operands_regs,
+
+   /* "$X,YZ", like SETH.  */
+   mmix_operands_reg_yz,
+
+   /* The regular "$X,$Y,$Z|Z".
+      The Z is optional; if only "$X,$Y" is given, then "$X,$Y,0" is
+      assumed.  */
+   mmix_operands_regs_z_opt,
+
+   /* The regular "$X,$Y,$Z|Z".  */
+   mmix_operands_regs_z,
+
+   /* "Address"; only JMP.  Zero operands allowed unless GNU syntax.  */
+   mmix_operands_jmp,
+
+   /* "$X|X,$Y,$Z|Z": PUSHGO; like "3", but X can be expressed as an
+      integer.  */
+   mmix_operands_pushgo,
+
+   /* Two registers or a register and a byte, like FLOT, possibly with
+      rounding: "$X,$Z|Z" or "$X,ROUND_MODE,$Z|Z".  */
+   mmix_operands_roundregs_z,
+
+   /* "X,YZ", POP.  Unless GNU syntax, zero or one operand is allowed.  */
+   mmix_operands_pop,
+
+   /* Two registers, possibly with rounding: "$X,$Z" or
+      "$X,ROUND_MODE,$Z".  */
+   mmix_operands_roundregs,
+
+   /* "XYZ", like SYNC.  */
+   mmix_operands_sync,
+
+   /* "X,$Y,$Z|Z", like SYNCD.  */
+   mmix_operands_x_regs_z,
+
+   /* "$X,Y,$Z|Z", like NEG and NEGU.  The Y field is optional, default 0.  */
+   mmix_operands_neg,
+
+   /* "$X,Address, like GETA or branches.  */
+   mmix_operands_regaddr,
+
+   /* "$X|X,Address, like PUSHJ.  */
+   mmix_operands_pushj,
+
+   /* "$X,spec_reg"; GET.  */
+   mmix_operands_get,
+
+   /* "spec_reg,$Z|Z"; PUT.  */
+   mmix_operands_put,
+
+   /* Two registers, "$X,$Y".  */
+   mmix_operands_set,
+
+   /* "$X,0"; SAVE.  */
+   mmix_operands_save,
+
+   /* "0,$Z"; UNSAVE. */
+   mmix_operands_unsave,
+
+   /* "X,Y,Z"; like SWYM or TRAP.  Zero (or 1 if GNU syntax) to three
+      operands, interpreted as 0; XYZ; X, YZ and X, Y, Z.  */
+   mmix_operands_xyz_opt,
+
+   /* Just "Z", like RESUME.  Unless GNU syntax, the operand can be omitted
+      and will then be assumed zero.  */
+   mmix_operands_resume,
+
+   /* These are specials to handle that pseudo-directives are specified
+      like ordinary insns when being mmixal-compatible.  They signify the
+      specific pseudo-directive rather than the operands type.  */
+
+   /* LOC.  */
+   mmix_operands_loc,
+
+   /* PREFIX.  */
+   mmix_operands_prefix,
+
+   /* BYTE.  */
+   mmix_operands_byte,
+
+   /* WYDE.  */
+   mmix_operands_wyde,
+
+   /* TETRA.  */
+   mmix_operands_tetra,
+
+   /* OCTA.  */
+   mmix_operands_octa,
+
+   /* LOCAL.  */
+   mmix_operands_local,
+
+   /* BSPEC.  */
+   mmix_operands_bspec,
+
+   /* ESPEC.  */
+   mmix_operands_espec,
+ };
+
+struct mmix_opcode
+ {
+   const char *name;
+   unsigned long match;
+   unsigned long lose;
+   enum mmix_operands_type operands;
+
+   /* This is used by the disassembly function.  */
+   enum mmix_insn_type type;
+ };
+
+/* Declare the actual tables.  */
+extern const struct mmix_opcode mmix_opcodes[];
+
+/* This one is terminated with an entry with a NULL name.  */
+extern const struct mmix_spec_reg mmix_spec_regs[];
+
+/* Some insn values we use when padding and synthesizing address loads.  */
+#define IMM_OFFSET_BIT 1
+#define COND_INV_BIT 0x8
+#define PRED_INV_BIT 0x10
+
+#define PUSHGO_INSN_BYTE 0xbe
+#define GO_INSN_BYTE 0x9e
+#define SETL_INSN_BYTE 0xe3
+#define INCML_INSN_BYTE 0xe6
+#define INCMH_INSN_BYTE 0xe5
+#define INCH_INSN_BYTE 0xe4
+#define SWYM_INSN_BYTE 0xfd
+
+/* We can have 256 - 32 (local registers) - 1 ($255 is not allocatable)
+   global registers.  */
+#define MAX_GREGS 223