libgloss:

* configure.in: Don't handle strongarm, ep9312 and xscale target
	names.
	* configure: Regenerate.
	* libnosys/configure.in: Don't handle strongarm and thumb target
	names.
	* libnosys/configure: Regenerate.

newlib:
	* configure.host: Don't handle ep9312, strongarm, xscale and thumb
	target names.
	* libc/machine/configure.in: Don't handle xscale target names.
	* libc/machine/configure: Regenerate.

libgloss/ChangeLog

@@ -1,3 +1,12 @@
+2011-06-14  Joseph Myers  <joseph@codesourcery.com>
+
+	* configure.in: Don't handle strongarm, ep9312 and xscale target
+	names.
+	* configure: Regenerate.
+	* libnosys/configure.in: Don't handle strongarm and thumb target
+	names.
+	* libnosys/configure: Regenerate.
+
 2011-05-27  Nick Clifton  <nickc@redhat.com>
 
 	* v8500/sbrk.c (_sbrk): Tidy code.

libgloss/configure

@@ -2557,7 +2557,7 @@ case "${target}" in
 	subdirs="$subdirs rx"
 
 	;;
-  strongarm-*-elf | strongarm-*-coff | arm*-*-elf | arm*-*-coff | ep9312-*-elf | ep9312-*-coff | xscale-*-elf | xscale-*-coff | *arm-*-*)
+  arm*-*-elf | arm*-*-coff | arm-*-*)
 	subdirs="$subdirs arm"
 
 	;;

libgloss/configure.in

@@ -124,7 +124,7 @@ case "${target}" in
   rx*-*-elf)
 	AC_CONFIG_SUBDIRS([rx])
 	;;
-  strongarm-*-elf | strongarm-*-coff | arm*-*-elf | arm*-*-coff | ep9312-*-elf | ep9312-*-coff | xscale-*-elf | xscale-*-coff | *arm-*-*)
+  arm*-*-elf | arm*-*-coff | arm-*-*)
 	AC_CONFIG_SUBDIRS([arm])
 	;;
   spu-*-elf)

libgloss/libnosys/configure

@@ -2050,8 +2050,6 @@ case "${target}" in
 	;;
   arm-*-*)
 	;;
-  strongarm-*-*)
-	;;
   bfin-*-*)
 	;;
   cris-*-* | crisv32-*-*)
@@ -2078,10 +2076,6 @@ case "${target}" in
 	;;
   sparc64-*-*)
 	;;
-  thumb-*-pe)
-	;;
-  thumb-*-*)
-	;;
   v850*-*-*)
 	;;
   w65-*-*)

libgloss/libnosys/configure.in

@@ -49,8 +49,6 @@ case "${target}" in
 	;;
   arm-*-*)
 	;;
-  strongarm-*-*)
-	;;
   bfin-*-*)
 	;;
   cris-*-* | crisv32-*-*)
@@ -77,10 +75,6 @@ case "${target}" in
 	;;
   sparc64-*-*)
 	;;
-  thumb-*-pe)
-	;;
-  thumb-*-*)
-	;;
   v850*-*-*)
 	;;
   w65-*-*)

newlib/ChangeLog

@@ -1,3 +1,10 @@
+2011-06-14  Joseph Myers  <joseph@codesourcery.com>
+
+	* configure.host: Don't handle ep9312, strongarm, xscale and thumb
+	target names.
+	* libc/machine/configure.in: Don't handle xscale target names.
+	* libc/machine/configure: Regenerate.
+
 2011-06-14  Craig Howland <howland@LGSInnovations.com>
 
 	* libc/time/tzset_r.c (tzset_r):  Correct behavior for changing from

newlib/configure.host

@@ -122,9 +122,6 @@ case "${host_cpu}" in
   d30v*)
 	machine_dir=d30v
 	;;
-  ep9312)
-	machine_dir=arm
-	;;
   fido)
 	machine_dir=m68k
 	newlib_cflags="${newlib_cflags} -DCOMPACT_CTYPE"
@@ -242,15 +239,6 @@ case "${host_cpu}" in
 	# FIXME: Might wish to make MALLOC_ALIGNMENT more generic.
 	newlib_cflags="${newlib_cflags} -DMALLOC_ALIGNMENT=8"
 	;;
-  strongarm)
-	machine_dir=arm
-	;;
-  xscale)
-	machine_dir=xscale
-	;;
-  thumb)
-	machine_dir=arm
-	;;
   tic4x|c4x)
 	machine_dir=tic4x
 	;;
@@ -393,12 +381,6 @@ case "${host}" in
   d30v*)
 	sys_dir=
 	;;
-  ep9312-*-*)
-	sys_dir=arm
-	if [ "x${newlib_may_supply_syscalls}" = "xno" ] ; then
-	  have_crt0="no"
-	fi
-	;;
   frv*)
         sys_dir=
         ;;
@@ -495,18 +477,6 @@ case "${host}" in
 	default_newlib_io_long_long="yes"
 	default_newlib_atexit_dynamic_alloc="no"
 	;;
-  strongarm-*-*)
-	sys_dir=arm
-	if [ "x${newlib_may_supply_syscalls}" = "xno" ] ; then
-	  have_crt0="no"
-	fi
-	;;
-  thumb-*-*)
-	sys_dir=arm
-	if [ "x${newlib_may_supply_syscalls}" = "xno" ] ; then
-	  have_crt0="no"
-	fi
-	;;
   tic6x*)
 	newlib_cflags="${newlib_cflags} -DMISSING_SYSCALL_NAMES"
 	have_crt0="no"
@@ -529,12 +499,6 @@ case "${host}" in
   w65-*-*)
 	sys_dir=w65
 	;;
-  xscale-*-*)
-	sys_dir=arm
-	if [ "x${newlib_may_supply_syscalls}" = "xno" ] ; then
-	  have_crt0="no"
-	fi
-	;;
   z8k-*-coff)
 	sys_dir=z8ksim
 	;;
@@ -596,7 +560,6 @@ case "${host}" in
 # to create the program's environment.
 # If --disable-newlib-supplied-syscalls is specified, then the end-user
 # may specify the protocol via gcc spec files supplied by libgloss.
-# See also thumb below.
 	if [ "x${newlib_may_supply_syscalls}" = "xyes" ] ; then
 #         newlib_cflags="${newlib_cflags} -DARM_RDP_MONITOR"
 	  newlib_cflags="${newlib_cflags} -DARM_RDI_MONITOR"
@@ -631,12 +594,6 @@ case "${host}" in
 	newlib_cflags="${newlib_cflags} -DABORT_MESSAGE -DSMALL_MEMORY -DMISSING_SYSCALL_NAMES"
 	syscall_dir=
 	;;
-  ep9312-*-*)
-	syscall_dir=syscalls
-	if [ "x${newlib_may_supply_syscalls}" = "xyes" ] ; then
-	  newlib_cflags="${newlib_cflags} -DARM_RDI_MONITOR"
-	fi
-	;;
   fido-*-elf)
 	newlib_cflags="${newlib_cflags} -DHAVE_RENAME -DHAVE_SYSTEM -DMISSING_SYSCALL_NAMES"
 	syscall_dir=
@@ -760,27 +717,6 @@ case "${host}" in
 		newlib_cflags="${newlib_cflags} -DTARGET_PTR_SIZE=64" ;;
 	esac
 	;;
-  strongarm-*-*)
-	syscall_dir=syscalls
-	;;
-  thumb-*-pe)
-	syscall_dir=syscalls
-# Don't use the debugging protocols just yet.
-	;;
-  thumb-*-*)
-	syscall_dir=syscalls
-# If newlib is supplying syscalls, select which debug protocol is being used.
-# ARM_RDP_MONITOR selects the Demon monitor.
-# ARM_RDI_MONITOR selects the Angel monitor.
-# If neither are defined, then hard coded defaults will be used
-# to create the program's environment.
-# If --disable-newlib-supplied-syscalls is specified, then the end-user
-# may specify the protocol via gcc spec files supplied by libgloss.
-	if [ "x${newlib_may_supply_syscalls}" = "xyes" ] ; then
-#         newlib_cflags="${newlib_cflags} -DARM_RDP_MONITOR"
-	  newlib_cflags="${newlib_cflags} -DARM_RDI_MONITOR"
-	fi
-	;;
   tic6x*)
 	syscall_dir=
 	newlib_cflags="${newlib_cflags} -DCLOCK_PROVIDED"
@@ -798,13 +734,6 @@ case "${host}" in
   xc16x-*)
           syscall_dir=syscalls
         ;;
-  xscale-*-*)
-	syscall_dir=syscalls
-	newlib_cflags="${newlib_cflags} -DHAVE_SYSTEM -DHAVE_RENAME"
-	if [ "x${newlib_may_supply_syscalls}" = "xyes" ] ; then
-	  newlib_cflags="${newlib_cflags} -DARM_RDI_MONITOR"
-	fi
-	;;
   xstormy16-*-*)
 	syscall_dir=syscalls
 	;;

newlib/libc/machine/configure

@@ -651,6 +651,7 @@ ELIX_LEVEL_1_TRUE
 ELIX_LEVEL_0_FALSE
 ELIX_LEVEL_0_TRUE
 LDFLAGS
+NO_INCLUDE_LIST
 NEWLIB_CFLAGS
 CCASFLAGS
 CCAS
@@ -816,7 +817,6 @@ v850
 w65
 x86_64
 xc16x
-xscale
 xstormy16
 z8k'
 
@@ -3694,6 +3694,9 @@ newlib_cflags="${newlib_cflags} -fno-builtin"
 NEWLIB_CFLAGS=${newlib_cflags}
 
 
+NO_INCLUDE_LIST=${noinclude}
+
+
 LDFLAGS=${ldflags}
 
 
@@ -9660,10 +9663,6 @@ if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
       hardcode_shlibpath_var=no
       ;;
 
-    freebsd1*)
-      ld_shlibs=no
-      ;;
-
     # FreeBSD 2.2.[012] allows us to include c++rt0.o to get C++ constructor
     # support.  Future versions do this automatically, but an explicit c++rt0.o
     # does not break anything, and helps significantly (at the cost of a little
@@ -10582,10 +10581,6 @@ dgux*)
   shlibpath_var=LD_LIBRARY_PATH
   ;;
 
-freebsd1*)
-  dynamic_linker=no
-  ;;
-
 freebsd* | dragonfly*)
   # DragonFly does not have aout.  When/if they implement a new
   # versioning mechanism, adjust this.
@@ -11445,7 +11440,7 @@ else
   lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
   lt_status=$lt_dlunknown
   cat > conftest.$ac_ext <<_LT_EOF
-#line 11448 "configure"
+#line 11443 "configure"
 #include "confdefs.h"
 
 #if HAVE_DLFCN_H
@@ -11551,7 +11546,7 @@ else
   lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
   lt_status=$lt_dlunknown
   cat > conftest.$ac_ext <<_LT_EOF
-#line 11554 "configure"
+#line 11549 "configure"
 #include "confdefs.h"
 
 #if HAVE_DLFCN_H
@@ -11877,8 +11872,6 @@ subdirs="$subdirs a29k"
 	x86_64) subdirs="$subdirs x86_64"
  ;;
 	xc16x) subdirs="$subdirs xc16x"
- ;;
-	xscale) subdirs="$subdirs xscale"
  ;;
 	xstormy16) subdirs="$subdirs xstormy16"
  ;;

newlib/libc/machine/configure.in

@@ -65,7 +65,6 @@ if test -n "${machine_dir}"; then
 	w65) AC_CONFIG_SUBDIRS(w65) ;;
 	x86_64) AC_CONFIG_SUBDIRS(x86_64) ;;
 	xc16x) AC_CONFIG_SUBDIRS(xc16x) ;;
-	xscale) AC_CONFIG_SUBDIRS(xscale) ;;
 	xstormy16) AC_CONFIG_SUBDIRS(xstormy16) ;;
 	z8k) AC_CONFIG_SUBDIRS(z8k) ;;
   esac;