newlib/libgloss/mt/startup-16-002.S

629 lines
14 KiB
ArmAsm
Raw Normal View History

/*
* interrupt_vectors.s -- the interrupt handler jump table.
*
*
* There are a total of 32 interrupt vector possible, however, only
* 11 of those are currently used (the others are reserved). The
* order of vectors is as follows:
*
* 1. Boot Vector. Vector for power-on/reset.
* 2. Software Vector. Vector for handling the SI instruction (an
* explicit interrupt caused by software).
* 3. Break Vector. Vector for handling the Break instruction.
* 4. Device 0 Vector. Service vector for device zero.
* 5. Device 1 Vector. Service vector for device one.
* 6. Device 2 Vector. Service vector for device two.
* 7. Device 3 Vector. Service vector for device three.
* 8. Device 4 Vector. Service vector for device four.
* 9. Device 5 Vector. Service vector for device five.
* 10. Device 6 Vector. Service vector for device six.
* 11. Device 7 Vector. Service vector for device seven.
*
* The rest of the interrupt vectors are reserved for future use.
*
*
* Each jump table entry consists of the following two instructions:
*
* jmp Label ; Label as appropriate
* nop ; implemented as or r0,r0,r0
*
* The following labels are reserved for the vectors named above,
* respectively:
*
* _BOOTIVEC, _SOFTIVEC, _BRKIVEC, _DEV0IVEC, _DEV1IVEC, _DEV2IVEC,
* _DEV3IVEC, _DEV4IVEC, _DEV5IVEC, _DEV6IVEC, _DEV7IVEC
*
*
*
* Copyright (c) 2001, 2002, 2003, 2004 Morpho Technologies
*
*/
.section .startup, "a", @progbits
.global __boot_start
__boot_start:
_INTERRUPT_VECTOR_TABLE:
jmp _BOOTIVEC ; Boot vector
or r0, r0, r0
jmp _SOFTIVEC ; Vector for SI instruction
or r0,r0,r0
jmp _BRKIVEC ; Vector for Break instruction
or r0,r0,r0
; The illegal instruction trap is not implemented.
_RESERVED1_IVEC:
jmp _RESERVED1_IVEC ; Vector for illegal instruction
or r0,r0,r0
jmp _OVFIVEC ; Vector for overflow exception
or r0,r0,r0
_RESERVED2_IVEC:
jmp _RESERVED2_IVEC
or r0,r0,r0
_RESERVED3_IVEC:
jmp _RESERVED3_IVEC
or r0,r0,r0
_RESERVED4_IVEC:
jmp _RESERVED4_IVEC
or r0,r0,r0
.text
.equ SI_IOPORT_ADR, _DEBUG_SW_SYSREQ_REG
.equ SI_IOPORT_BIT, 0x1
.equ BRK_IOPORT_ADR, _DEBUG_BREAK_REG
.equ BRK_IOPORT_BIT, 0x1
.global _BOOTIVEC
_BOOTIVEC:
; Initialize the interrupt controller's interrupt vector registers
ldui r1, #%hi16(_IVEC_DEFAULT)
ori r1, r1, #%lo16(_IVEC_DEFAULT)
stw r1, r0, #%lo16(_DEV0_INTERRUPT_REG)
stw r1, r0, #%lo16(_DEV1_INTERRUPT_REG)
stw r1, r0, #%lo16(_DEV2_INTERRUPT_REG)
stw r1, r0, #%lo16(_DEV3_INTERRUPT_REG)
stw r1, r0, #%lo16(_DEV4_INTERRUPT_REG)
stw r1, r0, #%lo16(_DEV5_INTERRUPT_REG)
stw r1, r0, #%lo16(_DEV6_INTERRUPT_REG)
stw r1, r0, #%lo16(_DEV7_INTERRUPT_REG)
stw r1, r0, #%lo16(_DEV8_INTERRUPT_REG)
stw r1, r0, #%lo16(_DEV9_INTERRUPT_REG)
stw r1, r0, #%lo16(_DEV10_INTERRUPT_REG)
stw r1, r0, #%lo16(_DEV11_INTERRUPT_REG)
stw r1, r0, #%lo16(_DEV12_INTERRUPT_REG)
stw r1, r0, #%lo16(_DEV13_INTERRUPT_REG)
stw r1, r0, #%lo16(_DEV14_INTERRUPT_REG)
stw r1, r0, #%lo16(_DEV15_INTERRUPT_REG)
stw r1, r0, #%lo16(_DEV16_INTERRUPT_REG)
stw r1, r0, #%lo16(_DEV17_INTERRUPT_REG)
stw r1, r0, #%lo16(_DEV18_INTERRUPT_REG)
; Statically initialized data must be copied from ROM to RAM.
; This is done in the C run-time start-up code (crt0.o).
; Jump to the beginning of the application and enable interrupts.
jmp _start
ei
; Handler for the SI instruction. To perform a system call, the
; C model uses a trapping mechanism which executes an SI instruction.
; The Morpho Technologies simulator simply performs a branch to
; this vector to simulate the SI instruction (this is as the hardware
; behaves). In order to trigger the simulator that a system call
; is needed a write into the I/O register at address $40005 to
; set bit #2 (0x4) is necessary.
;
; The above address has been changed to 0x00031C and the bit number
; is zero. (The manifest constants have been changed to reflect this.)
.global _SOFTIVEC
_SOFTIVEC:
; Build a frame to save registers.
subi sp, sp, #$8
stw r9, sp, #$4
ldui r9, #%hi16(SI_IOPORT_ADR)
stw r10, sp, #$0
ori r9, r9, #%lo16(SI_IOPORT_ADR)
ori r10, r0, #SI_IOPORT_BIT
stw r10, r9, #$0
or r0, r0, r0 ; SYS_call is handled by simulator here...
ldw r10, sp, #$0
or r0, r0, r0
ldw r9, sp, #$4
reti r14
addi sp, sp, #$8
; Handler for BREAK instruction. This handler triggers the simulator
; to send a SIGTRAP signal to gdb by writing to the I/O register at
; address $40005, setting bit #0 (0x1).
;
; The above address has been changed to 0x000304 and the bit number
; is zero. (The manifest constants have been changed to reflect this.)
.global _BRKIVEC
_BRKIVEC:
; Build a frame to save registers.
subi sp, sp, #$8
stw r9, sp, #$4
ldui r9, #%hi16(BRK_IOPORT_ADR)
stw r10, sp, #$0
ori r9, r9, #%lo16(BRK_IOPORT_ADR)
ori r10, r0, #BRK_IOPORT_BIT
stw r10, r9, #$0
or r0, r0, r0
or r0, r0, r0
or r0, r0, r0
or r0, r0, r0
or r0, r0, r0
ldw r10, sp, #$0
ldw r9, sp, #$4
reti r15
addi sp, sp, #$8
; The documentation is lacking in the specification of the Overflow
; Exception generation. The address of the instruction causing the
; overflow is placed into R15 and the overflow exception interrupt
; is triggered. So, to continue execution, return to the address
; of the next instruction (i.e., R15 + one instruction).
_OVFIVEC:
addi r15, r15, #$4
or r0, r0, r0
reti r15
or r0, r0, r0
.global _IVEC_DEFAULT
_IVEC_DEFAULT:
reti r15
or r0, r0, r0
.section .internal_io, "a", @nobits
.fill 256 ; Fill the first page.
; This is the memory-mapped I/O region.
; Hardware Interrupt Registers
;.org 0xfff100
.global _DEV0_INTERRUPT_REG
_DEV0_INTERRUPT_REG:
.word 0x00000000
.global _DEV1_INTERRUPT_REG
_DEV1_INTERRUPT_REG:
.word 0x00000000
.global _DEV2_INTERRUPT_REG
_DEV2_INTERRUPT_REG:
.word 0x00000000
.global _DEV3_INTERRUPT_REG
_DEV3_INTERRUPT_REG:
.word 0x00000000
.global _DEV4_INTERRUPT_REG
_DEV4_INTERRUPT_REG:
.word 0x00000000
.global _DEV5_INTERRUPT_REG
_DEV5_INTERRUPT_REG:
.word 0x00000000
.global _DEV6_INTERRUPT_REG
_DEV6_INTERRUPT_REG:
.word 0x00000000
.global _DEV7_INTERRUPT_REG
_DEV7_INTERRUPT_REG:
.word 0x00000000
.global _DEV8_INTERRUPT_REG
_DEV8_INTERRUPT_REG:
.word 0x00000000
.global _DEV9_INTERRUPT_REG
_DEV9_INTERRUPT_REG:
.word 0x00000000
.global _DEV10_INTERRUPT_REG
_DEV10_INTERRUPT_REG:
.word 0x00000000
.global _DEV11_INTERRUPT_REG
_DEV11_INTERRUPT_REG:
.word 0x00000000
.global _DEV12_INTERRUPT_REG
_DEV12_INTERRUPT_REG:
.word 0x00000000
.global _DEV13_INTERRUPT_REG
_DEV13_INTERRUPT_REG:
.word 0x00000000
.global _DEV14_INTERRUPT_REG
_DEV14_INTERRUPT_REG:
.word 0x00000000
.global _DEV15_INTERRUPT_REG
_DEV15_INTERRUPT_REG:
.word 0x00000000
.global _DEV16_INTERRUPT_REG
_DEV16_INTERRUPT_REG:
.word 0x00000000
.global _DEV17_INTERRUPT_REG
_DEV17_INTERRUPT_REG:
.word 0x00000000
.global _DEV18_INTERRUPT_REG
_DEV18_INTERRUPT_REG:
.word 0x00000000
; 128 bytes minus ten registers (four bytes per register)
.fill (128 - 19 * 4)
.global _INTERRUPT_MASK_REG
_INTERRUPT_MASK_REG:
.word 0x00000000
; 128 bytes minus one register (four bytes per register)
.fill (128 - 1 * 4)
;.org 0xfff200
; MorphoSys Decoder Registers
.global _MS_DEC_CIRC_BUFF_SEL_REG
_MS_DEC_CIRC_BUFF_SEL_REG:
.word 0x00000000
.global _MS_DEC_SKIP_FACTOR_REG
_MS_DEC_SKIP_FACTOR_REG:
.word 0x00000000
.global _MS_DEC_CUSTOM_PERM_REG
_MS_DEC_CUSTOM_PERM_REG:
.word 0x00000000
.global _MS_DEC_CTXT_BASE_REG
_MS_DEC_CTXT_BASE_REG:
.word 0x00000000
.global _MS_DEC_LOOKUP_TBL_REG
_MS_DEC_LOOKUP_TBL_REG:
.word 0x00000000
.global _MS_CIRC_BUFF0_END_REG
_MS_CIRC_BUFF0_END_REG:
.word (__FRAME_BUFFER_END)
.global _MS_CIRC_BUFF0_SIZE_REG
_MS_CIRC_BUFF0_SIZE_REG:
.word __FRAME_BUFFER_SIZE
.global _MS_DATA_BLK0_END_REG
_MS_DATA_BLK0_END_REG:
.word 0x00000000
.global _MS_DATA_BLK0_SIZE_REG
_MS_DATA_BLK0_SIZE_REG:
.word 0x00000000
.global _MS_CIRC_BUFF1_END_REG
_MS_CIRC_BUFF1_END_REG:
.word (__FRAME_BUFFER_END)
.global _MS_CIRC_BUFF1_SIZE_REG
_MS_CIRC_BUFF1_SIZE_REG:
.word __FRAME_BUFFER_SIZE
.global _MS_DATA_BLK1_END_REG
_MS_DATA_BLK1_END_REG:
.word 0x00000000
.global _MS_DATA_BLK1_SIZE_REG
_MS_DATA_BLK1_SIZE_REG:
.word 0x00000000
.global _MS_CIRC_BUFF2_END_REG
_MS_CIRC_BUFF2_END_REG:
.word (__FRAME_BUFFER_END)
.global _MS_CIRC_BUFF2_SIZE_REG
_MS_CIRC_BUFF2_SIZE_REG:
.word __FRAME_BUFFER_SIZE
.global _MS_DATA_BLK2_END_REG
_MS_DATA_BLK2_END_REG:
.word 0x00000000
.global _MS_DATA_BLK2_SIZE_REG
_MS_DATA_BLK2_SIZE_REG:
.word 0x00000000
.global _MS_CIRC_BUFF3_END_REG
_MS_CIRC_BUFF3_END_REG:
.word (__FRAME_BUFFER_END)
.global _MS_CIRC_BUFF3_SIZE_REG
_MS_CIRC_BUFF3_SIZE_REG:
.word __FRAME_BUFFER_SIZE
.global _MS_DATA_BLK3_END_REG
_MS_DATA_BLK3_END_REG:
.word 0x00000000
.global _MS_DATA_BLK3_SIZE_REG
_MS_DATA_BLK3_SIZE_REG:
.word 0x00000000
.global _MS_CIRC_BUFF4_END_REG
_MS_CIRC_BUFF4_END_REG:
.word (__FRAME_BUFFER_END)
.global _MS_CIRC_BUFF4_SIZE_REG
_MS_CIRC_BUFF4_SIZE_REG:
.word __FRAME_BUFFER_SIZE
.global _MS_DATA_BLK4_END_REG
_MS_DATA_BLK4_END_REG:
.word 0x00000000
.global _MS_DATA_BLK4_SIZE_REG
_MS_DATA_BLK4_SIZE_REG:
.word 0x00000000
.global _MS_CIRC_BUFF5_END_REG
_MS_CIRC_BUFF5_END_REG:
.word (__FRAME_BUFFER_END)
.global _MS_CIRC_BUFF5_SIZE_REG
_MS_CIRC_BUFF5_SIZE_REG:
.word __FRAME_BUFFER_SIZE
.global _MS_DATA_BLK5_END_REG
_MS_DATA_BLK5_END_REG:
.word 0x00000000
.global _MS_DATA_BLK5_SIZE_REG
_MS_DATA_BLK5_SIZE_REG:
.word 0x00000000
.global _MS_CIRC_BUFF6_END_REG
_MS_CIRC_BUFF6_END_REG:
.word (__FRAME_BUFFER_END)
.global _MS_CIRC_BUFF6_SIZE_REG
_MS_CIRC_BUFF6_SIZE_REG:
.word __FRAME_BUFFER_SIZE
.global _MS_DATA_BLK6_END_REG
_MS_DATA_BLK6_END_REG:
.word 0x00000000
.global _MS_DATA_BLK6_SIZE_REG
_MS_DATA_BLK6_SIZE_REG:
.word 0x00000000
.global _MS_CIRC_BUFF7_END_REG
_MS_CIRC_BUFF7_END_REG:
.word (__FRAME_BUFFER_END)
.global _MS_CIRC_BUFF7_SIZE_REG
_MS_CIRC_BUFF7_SIZE_REG:
.word __FRAME_BUFFER_SIZE
.global _MS_DATA_BLK7_END_REG
_MS_DATA_BLK7_END_REG:
.word 0x00000000
.global _MS_DATA_BLK7_SIZE_REG
_MS_DATA_BLK7_SIZE_REG:
.word 0x00000000
.global _MS_DEC_AUTO_INC0_REG
_MS_DEC_AUTO_INC0_REG:
.word 0x00000000
.global _MS_DEC_AUTO_INC1_REG
_MS_DEC_AUTO_INC1_REG:
.word 0x00000000
.global _MS_DEC_AUTO_INC2_REG
_MS_DEC_AUTO_INC2_REG:
.word 0x00000000
.global _MS_DEC_AUTO_INC3_REG
_MS_DEC_AUTO_INC3_REG:
.word 0x00000000
.global _MS_DEC_AUTO_INC4_REG
_MS_DEC_AUTO_INC4_REG:
.word 0x00000000
.global _MS_DEC_AUTO_INC5_REG
_MS_DEC_AUTO_INC5_REG:
.word 0x00000000
.global _MS_DEC_AUTO_INC6_REG
_MS_DEC_AUTO_INC6_REG:
.word 0x00000000
.global _MS_DEC_AUTO_INC7_REG
_MS_DEC_AUTO_INC7_REG:
.word 0x00000000
; 256 bytes minus forty-five registers (four bytes per register)
.fill (256 - 45 * 4)
;.org 0xfff300
; Debug Registers
.global _DEBUG_HALT_REG
_DEBUG_HALT_REG:
.word 0x00000000
.global _DEBUG_BREAK_REG
_DEBUG_BREAK_REG:
.word 0x00000000
; There are five reserved registers.
.fill (5 * 4)
.global _DEBUG_SW_SYSREQ_REG
_DEBUG_SW_SYSREQ_REG:
.word 0x00000000
; 256 bytes minus eight registers (four bytes per register)
.fill (256 - 8 * 4)
;.org 0xfff400
; Sequence Generator Registers
.global _SEQ_GEN_CTRL_REG
_SEQ_GEN_CTRL_REG:
.word 0x00000000
.global _SEQ_GEN_MASK_REGS
_SEQ_GEN_MASK_REGS:
; The mask registers consume two pages (less one control register).
; 512 bytes minus one register (four bytes per register).
.fill (256 + 256 - 1 * 4)
;.org 0xfff600
; Timer Registers
.global _TIMER0_VAL_REG
_TIMER0_VAL_REG:
.word 0x00000000
.global _TIMER1_VAL_REG
_TIMER1_VAL_REG:
.word 0x00000000
.global _TIMER2_VAL_REG
_TIMER2_VAL_REG:
.word 0x00000000
.global _TIMER3_VAL_REG
_TIMER3_VAL_REG:
.word 0x00000000
; 256 bytes minus four registers (four bytes per register)
.fill (256 - 4 * 4)
;.org 0xfff700
; Output Line Control Registers
.global _OUTPUT0_CTRL
_OUTPUT0_CTRL:
.word 0x00000000
.global _OUTPUT1_CTRL
_OUTPUT1_CTRL:
.word 0x00000000
.global _OUTPUT2_CTRL
_OUTPUT2_CTRL:
.word 0x00000000
.global _OUTPUT3_CTRL
_OUTPUT3_CTRL:
.word 0x00000000
.global _OUTPUT4_CTRL
_OUTPUT4_CTRL:
.word 0x00000000
.global _OUTPUT5_CTRL
_OUTPUT5_CTRL:
.word 0x00000000
.global _OUTPUT6_CTRL
_OUTPUT6_CTRL:
.word 0x00000000
.global _OUTPUT7_CTRL
_OUTPUT7_CTRL:
.word 0x00000000
.global _OUTPUT8_CTRL
_OUTPUT8_CTRL:
.word 0x00000000
.global _OUTPUT9_CTRL
_OUTPUT9_CTRL:
.word 0x00000000
.global _OUTPUT10_CTRL
_OUTPUT10_CTRL:
.word 0x00000000
;; 128 bytes minus eleven registers (four bytes per register)
;.fill (128 - 11 * 4)
.global _INPUT0_CTRL
_INPUT0_CTRL:
.word 0x00000000
;; 128 bytes minus one register (four bytes per register)
;.fill (128 - 1 * 4)
; 256 bytes minus twelve registers (four bytes per register)
.fill (256 - 12 * 4)
;.org 0xfff800
; IQ Buffer Registers
.global _IQ_BUFF_CTRL_REG
_IQ_BUFF_CTRL_REG:
.word 0x00000000
.global _IQ_BUFF_PARAMETER1_REG
_IQ_BUFF_PARAMETER1_REG:
.word 0x00000000
.global _IQ_BUFF_DATA_SIZE1_REG
_IQ_BUFF_DATA_SIZE1_REG:
.word 0x00000000
.global _IQ_BUFF_TRANSFER_SIZE1_REG
_IQ_BUFF_TRANSFER_SIZE1_REG:
.word 0x00000000
.global _IQ_BUFF_FB_ADDR1_REG
_IQ_BUFF_FB_ADDR1_REG:
.word 0x00000000
.global _IQ_BUFF_PARAMETER2_REG
_IQ_BUFF_PARAMETER2_REG:
.word 0x00000000
.global _IQ_BUFF_DATA_SIZE2_REG
_IQ_BUFF_DATA_SIZE2_REG:
.word 0x00000000
.global _IQ_BUFF_TRANSFER_SIZE2_REG
_IQ_BUFF_TRANSFER_SIZE2_REG:
.word 0x00000000
.global _IQ_BUFF_FB_ADDR2_REG
_IQ_BUFF_FB_ADDR2_REG:
.word 0x00000000
; 256 bytes minus nine registers (four bytes per register)
.fill (256 - 9 * 4)
;.org 0xfff900
; Reserved memory-mapped space.
.fill (0x1000 - 0x900)