newlib/libgloss/or1k/or1k_uart.c

168 lines
5.2 KiB
C
Raw Normal View History

/* or1k_uart.c -- UART implementation for OpenRISC 1000.
*
*Copyright (c) 2014 Authors
*
* Contributor Stefan Wallentowitz <stefan.wallentowitz@tum.de>
* Contributor Olof Kindgren <olof.kindgren@gmail.com>
*
* The authors hereby grant permission to use, copy, modify, distribute,
* and license this software and its documentation for any purpose, provided
* that existing copyright notices are retained in all copies and that this
* notice is included verbatim in any distributions. No written agreement,
* license, or royalty fee is required for any of the authorized uses.
* Modifications to this software may be copyrighted by their authors
* and need not follow the licensing terms described here, provided that
* the new terms are clearly indicated on the first page of each file where
* they apply.
*/
#include "include/or1k-support.h"
#include "or1k_uart.h"
#include <stdint.h>
// Register interface
#define RB _or1k_board_uart_base + 0 // Receiver Buffer (R)
#define THR _or1k_board_uart_base + 0 // Transmitter Holding Register (W)
#define IER _or1k_board_uart_base + 1 // Interrupt Enable Register (RW)
#define IIR _or1k_board_uart_base + 2 // Interrupt Identification Register (R)
#define FCR _or1k_board_uart_base + 2 // FIFO Control Register (W)
#define LCR _or1k_board_uart_base + 3 // Line Control Register (RW)
#define MCR _or1k_board_uart_base + 4 // Modem Control Register (W)
#define LSR _or1k_board_uart_base + 5 // Line Status Register (R)
#define MSR _or1k_board_uart_base + 6 // Modem Status Register (R)
// Divisor Register (Accessed when DLAB bit in LCR is set)
#define DLB1 _or1k_board_uart_base + 0 // Divisor Latch LSB (RW)
#define DLB2 _or1k_board_uart_base + 1 // Divisor Latch MSB (RW)
// Interrupt Enable Register bits
#define IER_RDAI 0 // Receiver Data Available Interrupt
#define IER_TEI 1 // Transmitter Holding Register Empty Interrupt
#define IER_RLSI 2 // Receiver Line Status Interrupt
#define IER_MSI 3 // Modem Status Interrupt
// Interrupt Identification Register Values
#define IIR_RLS 0xC6 // Receiver Line Status
#define IIR_RDA 0xC4 // Receiver Data Available
#define IIR_TO 0xCC // Timeout
#define IIR_THRE 0xC2 // Transmitter Holding Register Empty
#define IIT_MS 0xC0 // Modem Status
// FIFO Control Register bits
#define FCR_CLRRECV 0x1 // Clear receiver FIFO
#define FCR_CLRTMIT 0x2 // Clear transmitter FIFO
// FIFO Control Register bit 7-6 values
#define FCR_TRIG_1 0x0 // Trigger level 1 byte
#define FCR_TRIG_4 0x40 // Trigger level 4 bytes
#define FCR_TRIG_8 0x80 // Trigger level 8 bytes
#define FCR_TRIG_14 0xC0 // Trigger level 14 bytes
// Line Control Reigster values and bits
#define LCR_BPC_5 0x0 // 5 bits per character
#define LCR_BPC_6 0x1 // 6 bits per character
#define LCR_BPC_7 0x2 // 7 bits per character
#define LCR_BPC_8 0x3 // 8 bits per character
#define LCR_SB_1 0x0 // 1 stop bit
#define LCR_SB_2 0x4 // 1.5 stop bits (LCR_BPC_5) or 2 stop bits (else)
#define LCR_PE 0x8 // Parity Enabled
#define LCR_EPS 0x10 // Even Parity Select
#define LCR_SP 0x20 // Stick Parity
#define LCR_BC 0x40 // Break Control
#define LCR_DLA 0x80 // Divisor Latch Access
// Line Status Register
#define LSR_DR 0x0 // Data Ready
#define LSR_OE 0x2 // Overrun Error
#define LSR_PE 0x4 // Parity Error
#define LSR_FE 0x8 // Framing Error
#define LSR_BI 0x10 // Break Interrupt
#define LSR_TFE 0x20 // Transmitter FIFO Empty
#define LSR_TEI 0x40 // Transmitter Empty Indicator
/**
* The registered callback function
*/
void (*_or1k_uart_read_cb)(char c);
/**
* This is the interrupt handler that is registered for the callback
* function.
*/
void _or1k_uart_interrupt_handler(uint32_t data)
{
uint8_t iir = REG8(IIR);
// Check if this is a read fifo or timeout interrupt, bit 0
// indicates pending interrupt and the other bits are IIR_RDA
// or IIR_TO
if (!(iir & 0x1) || ((iir & 0xfe) != IIR_RDA) ||
((iir & 0xfe) != IIR_TO)) {
return;
}
// Read character and call callback function
_or1k_uart_read_cb(REG8(RB));
}
int _or1k_uart_init(void)
{
uint16_t divisor;
// Is uart present?
if (!_or1k_board_uart_base) {
return -1;
}
// Reset the callback function
_or1k_uart_read_cb = 0;
// Calculate and set divisor
divisor = _or1k_board_clk_freq / (_or1k_board_uart_baud * 16);
REG8(LCR) = LCR_DLA;
REG8(DLB1) = divisor & 0xff;
REG8(DLB2) = divisor >> 8;
// Set line control register:
// - 8 bits per character
// - 1 stop bit
// - No parity
// - Break disabled
// - Disallow access to divisor latch
REG8(LCR) = LCR_BPC_8;
// Reset FIFOs and set trigger level to 14 bytes
REG8(FCR) = FCR_CLRRECV | FCR_CLRTMIT | FCR_TRIG_14;
// Disable all interrupts
REG8(IER) = 0;
return 0;
}
void _or1k_uart_write(char c)
{
// Wait until FIFO is empty
while (!(REG8(LSR) & LSR_TFE)) {}
// Write character to device
REG8(THR) = c;
}
void or1k_uart_set_read_cb(void (*cb)(char c))
{
// Set callback function
_or1k_uart_read_cb = cb;
// Enable interrupt
REG8(IER) = 1 << IER_RDAI;
// Add the interrupt handler that calls the callback function
or1k_interrupt_handler_add(_or1k_board_uart_IRQ,
_or1k_uart_interrupt_handler, 0);
// Enable UART interrupt
or1k_interrupt_enable(_or1k_board_uart_IRQ);
}