newlib/Makefile.tpl

1614 lines
56 KiB
Makefile
Raw Normal View History

[+ AutoGen5 template -*- Mode: Makefile -*-
in
+]
# Makefile.in is generated from Makefile.tpl by 'autogen Makefile.def'.
#
# Makefile for directory with subdirs to build.
# Copyright (C) 1990, 1991, 1992, 1993, 1994, 1995, 1996, 1997, 1998,
# 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006 Free Software Foundation
#
# This file is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation; either version 2 of the License, or
# (at your option) any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program; if not, write to the Free Software
# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
#
# -------------------------------
# Standard Autoconf-set variables
# -------------------------------
VPATH=@srcdir@
build_alias=@build_alias@
build=@build@
host_alias=@host_alias@
host=@host@
target_alias=@target_alias@
target=@target@
program_transform_name = @program_transform_name@
prefix = @prefix@
exec_prefix = @exec_prefix@
srcdir = @srcdir@
bindir = @bindir@
sbindir = @sbindir@
libexecdir = @libexecdir@
datadir = @datadir@
sysconfdir = @sysconfdir@
sharedstatedir = @sharedstatedir@
localstatedir = @localstatedir@
libdir = @libdir@
includedir = @includedir@
oldincludedir = @oldincludedir@
infodir = @infodir@
2006-04-06 Carlos O'Donell <carlos@codesourcery.com> * Makefile.tpl: Add install-html target. * Makefile.def: Add install-html target. * Makefile.in: Regenerate. * configure.in: Add --with-datarootdir, --with-docdir, and --with-htmldir options. * configure: Regenerate. bfd/ 2006-04-06 Carlos O'Donell <carlos@codesourcery.com> * po/Make-in: Add install-html target. * Makefile.am: Rename docdir to bfddocdir. Add datarootdir, docdir htmldir. Add install-html and install-html-recursive targets. * Makefile.in: Regenerate. * configure.in: AC_SUBST for datarootdir, docdir and htmldir. * configure: Regenerate. bfd/doc/ 2006-04-06 Carlos O'Donell <carlos@codesourcery.com> * Makefile.am: Add install-html and install-html-am targets. Define datarootdir, docdir and htmldir. * Makefile.in: Regenerate. binutils/ 2006-04-06 Carlos O'Donell <carlos@codesourcery.com> * po/Make-in: Add install-html target. * Makefile.am: Add install-html and install-html-recursive targets. * Makefile.in: Regenerate. * configure.in: AC_SUBST datarootdir, docdir and htmldir. * configure: Regenerate. * doc/Makefile.am: Add install-html and install-html-am targets. * doc/Makefile.in: Regenerate. etc/ 2006-04-06 Carlos O'Donell <carlos@codesourcery.com> * Makefile.in: Add install-html target. Add htmldir, docdir and datarootdir. * configure.texi: Document install-html target. * configure.in: AC_SUBST datarootdir, docdir, htmldir. * configure: Regenerate. gas/ 2006-04-06 Carlos O'Donell <carlos@codesourcery.com> * po/Make-in: Add install-html target. * Makefile.am: Add install-html and install-html-recursive targets. * Makefile.in: Regenerate. * configure.in: AC_SUBST datarootdir, docdir, htmldir. * configure: Regenerate. * doc/Makefile.am: Add install-html and install-html-am targets. * doc/Makefile.in: Regenerate. gprof/ 2006-04-06 Carlos O'Donell <carlos@codesourcery.com> * po/Make-in: Add install-html target. * Makefile.am: Add install-html, install-html-am and install-html-recursive targets. * Makefile.in: Regenerate. * configure.in: AC_SUBST datarootdir, docdir, htmldir. * configure: Regenerate. intl/ 2006-04-06 Carlos O'Donell <carlos@codesourcery.com> * intl/Makefile.in: Add html info and dvi and install-html to .PHONY Add install-html target. ld/ 2006-04-06 Carlos O'Donell <carlos@codesourcery.com> * Makefile.am: Add install-html, install-html-am, and install-html-recursive targets. * Makefile.in: Regenerate. * configure.in: AC_SUBST datarootdir, docdir, htmldir. * configure: Regenerate. * po/Make-in: Add install-html target. opcodes/ 2006-04-06 Carlos O'Donell <carlos@codesourcery.com> * Makefile.am: Add install-html target. * Makefile.in: Regenerate.
2006-04-06 23:49:30 +02:00
datarootdir = @datarootdir@
docdir = @docdir@
htmldir = @htmldir@
mandir = @mandir@
man1dir = $(mandir)/man1
man2dir = $(mandir)/man2
man3dir = $(mandir)/man3
man4dir = $(mandir)/man4
man5dir = $(mandir)/man5
man6dir = $(mandir)/man6
man7dir = $(mandir)/man7
man8dir = $(mandir)/man8
man9dir = $(mandir)/man9
INSTALL = @INSTALL@
INSTALL_PROGRAM = @INSTALL_PROGRAM@
INSTALL_SCRIPT = @INSTALL_SCRIPT@
INSTALL_DATA = @INSTALL_DATA@
LN = @LN@
LN_S = @LN_S@
# -------------------------------------------------
# Miscellaneous non-standard autoconf-set variables
# -------------------------------------------------
# The gcc driver likes to know the arguments it was configured with.
TOPLEVEL_CONFIGURE_ARGUMENTS=@TOPLEVEL_CONFIGURE_ARGUMENTS@
tooldir = @tooldir@
build_tooldir = @build_tooldir@
GDB_NLM_DEPS =
# This is the name of the environment variable used for the path to
# the libraries.
RPATH_ENVVAR = @RPATH_ENVVAR@
# Build programs are put under this directory.
BUILD_SUBDIR = @build_subdir@
# This is set by the configure script to the arguments to use when configuring
# directories built for the build system.
BUILD_CONFIGARGS = @build_configargs@ --with-build-subdir="$(BUILD_SUBDIR)"
# This is the list of variables to export in the environment when
# configuring any subdirectory. It must also be exported whenever
# recursing into a build directory in case that directory's Makefile
# re-runs configure.
BASE_EXPORTS = \
FLEX="$(FLEX)"; export FLEX; \
LEX="$(LEX)"; export LEX; \
BISON="$(BISON)"; export BISON; \
YACC="$(YACC)"; export YACC; \
M4="$(M4)"; export M4; \
MAKEINFO="$(MAKEINFO)"; export MAKEINFO;
# This is the list of variables to export in the environment when
# configuring subdirectories for the build system.
BUILD_EXPORTS = \
$(BASE_EXPORTS) \
AR="$(AR_FOR_BUILD)"; export AR; \
AS="$(AS_FOR_BUILD)"; export AS; \
CC="$(CC_FOR_BUILD)"; export CC; \
CFLAGS="$(CFLAGS_FOR_BUILD)"; export CFLAGS; \
CONFIG_SHELL="$(SHELL)"; export CONFIG_SHELL; \
CXX="$(CXX_FOR_BUILD)"; export CXX; \
CXXFLAGS="$(CXXFLAGS_FOR_BUILD)"; export CXXFLAGS; \
GCJ="$(GCJ_FOR_BUILD)"; export GCJ; \
GFORTRAN="$(GFORTRAN_FOR_BUILD)"; export GFORTRAN; \
DLLTOOL="$(DLLTOOL_FOR_BUILD)"; export DLLTOOL; \
LD="$(LD_FOR_BUILD)"; export LD; \
LDFLAGS="$(LDFLAGS_FOR_BUILD)"; export LDFLAGS; \
NM="$(NM_FOR_BUILD)"; export NM; \
RANLIB="$(RANLIB_FOR_BUILD)"; export RANLIB; \
WINDRES="$(WINDRES_FOR_BUILD)"; export WINDRES;
# This is the list of directories to built for the host system.
SUBDIRS = @configdirs@
# This is set by the configure script to the arguments to use when configuring
# directories built for the host system.
HOST_CONFIGARGS = @host_configargs@
# Host programs are put under this directory, which is . except if building
# with srcdir=..
HOST_SUBDIR = @host_subdir@
# This is the list of variables to export in the environment when
toplevel: 2005-12-05 Paolo Bonzini <bonzini@gnu.org> Sync with gcc: 2005-12-05 Paolo Bonzini <bonzini@gnu.org> * configure.in (CONFIGURED_BISON, CONFIGURED_YACC, CONFIGURED_M4, CONFIGURED_FLEX, CONFIGURED_LEX, CONFIGURED_MAKEINFO): Remove "CONFIGURED_" from the AC_CHECK_PROGS invocation. Move below. Find in-tree tools if available. (EXPECT, RUNTEST, LIPO, STRIP): Find them and substitute them. (CONFIGURED_*_FOR_TARGET): Don't set nor substitute. (*_FOR_TARGET): Set them with GCC_TARGET_TOOL. (COMPILER_*_FOR_TARGET): New. * Makefile.tpl (HOST_EXPORTS): Add *_FOR_TARGET symbols that gcc needs. (BASE_TARGET_EXPORTS): Use COMPILER_*_FOR_TARGET symbols. (CONFIGURED_*, USUAL_*): Remove. (BISON, YACC, FLEX, LEX, M4, MAKEINFO, EXPECT, RUNTEST, LIPO, STRIP): Use autoconf substitutions. (COMPILER_AS_FOR_TARGET, COMPILER_LD_FOR_TARGET, COMPILER_NM_FOR_TARGET): New. (EXTRA_HOST_FLAGS): Pass LIPO and STRIP. (all): Make all-host and all-target in parallel. (do-[+make_target+], do-check, install, [+compare-target+]): Ensure that $$r and $$s are set before invoking a recursive make. (stage[+id+]-bubble): Likewise, and invoke the comparison at the end. ([+bootstrap-target+]): Inline most of the `all' target. 2005-11-29 Ben Elliston <bje@au.ibm.com> * Makefile.tpl (clean-target-libgcc): Invoke clean-target-libgcc from the gcc build directory. * Makefile.in: Regenerate. 2005-11-29 Ben Elliston <bje@au.ibm.com> * Makefile.def: Add new libdecnumber host_module. Make all-gcc depend on all-libdecnumber. * configure.in (host_libs): Include libdecnumber. * Makefile.in: Regenerate. * configure: Likewise. 2005-11-21 Kean Johnston <jkj@sco.com> * config.sub, config.guess: Sync from upstream sources. config: 2005-12-05 Paolo Bonzini <bonzini@gnu.org> * acx.m4 (GCC_TARGET_TOOL): New.
2005-12-05 16:16:05 +01:00
# configuring subdirectories for the host system. We need to pass
# some to the GCC configure because of its hybrid host/target nature.
HOST_EXPORTS = \
$(BASE_EXPORTS) \
CC="$(CC)"; export CC; \
CFLAGS="$(CFLAGS)"; export CFLAGS; \
CONFIG_SHELL="$(SHELL)"; export CONFIG_SHELL; \
CXX="$(CXX)"; export CXX; \
CXXFLAGS="$(CXXFLAGS)"; export CXXFLAGS; \
AR="$(AR)"; export AR; \
AS="$(AS)"; export AS; \
CC_FOR_BUILD="$(CC_FOR_BUILD)"; export CC_FOR_BUILD; \
DLLTOOL="$(DLLTOOL)"; export DLLTOOL; \
LD="$(LD)"; export LD; \
LDFLAGS="$(LDFLAGS)"; export LDFLAGS; \
NM="$(NM)"; export NM; \
RANLIB="$(RANLIB)"; export RANLIB; \
WINDRES="$(WINDRES)"; export WINDRES; \
OBJCOPY="$(OBJCOPY)"; export OBJCOPY; \
OBJDUMP="$(OBJDUMP)"; export OBJDUMP; \
toplevel: 2005-12-05 Paolo Bonzini <bonzini@gnu.org> Sync with gcc: 2005-12-05 Paolo Bonzini <bonzini@gnu.org> * configure.in (CONFIGURED_BISON, CONFIGURED_YACC, CONFIGURED_M4, CONFIGURED_FLEX, CONFIGURED_LEX, CONFIGURED_MAKEINFO): Remove "CONFIGURED_" from the AC_CHECK_PROGS invocation. Move below. Find in-tree tools if available. (EXPECT, RUNTEST, LIPO, STRIP): Find them and substitute them. (CONFIGURED_*_FOR_TARGET): Don't set nor substitute. (*_FOR_TARGET): Set them with GCC_TARGET_TOOL. (COMPILER_*_FOR_TARGET): New. * Makefile.tpl (HOST_EXPORTS): Add *_FOR_TARGET symbols that gcc needs. (BASE_TARGET_EXPORTS): Use COMPILER_*_FOR_TARGET symbols. (CONFIGURED_*, USUAL_*): Remove. (BISON, YACC, FLEX, LEX, M4, MAKEINFO, EXPECT, RUNTEST, LIPO, STRIP): Use autoconf substitutions. (COMPILER_AS_FOR_TARGET, COMPILER_LD_FOR_TARGET, COMPILER_NM_FOR_TARGET): New. (EXTRA_HOST_FLAGS): Pass LIPO and STRIP. (all): Make all-host and all-target in parallel. (do-[+make_target+], do-check, install, [+compare-target+]): Ensure that $$r and $$s are set before invoking a recursive make. (stage[+id+]-bubble): Likewise, and invoke the comparison at the end. ([+bootstrap-target+]): Inline most of the `all' target. 2005-11-29 Ben Elliston <bje@au.ibm.com> * Makefile.tpl (clean-target-libgcc): Invoke clean-target-libgcc from the gcc build directory. * Makefile.in: Regenerate. 2005-11-29 Ben Elliston <bje@au.ibm.com> * Makefile.def: Add new libdecnumber host_module. Make all-gcc depend on all-libdecnumber. * configure.in (host_libs): Include libdecnumber. * Makefile.in: Regenerate. * configure: Likewise. 2005-11-21 Kean Johnston <jkj@sco.com> * config.sub, config.guess: Sync from upstream sources. config: 2005-12-05 Paolo Bonzini <bonzini@gnu.org> * acx.m4 (GCC_TARGET_TOOL): New.
2005-12-05 16:16:05 +01:00
AR_FOR_TARGET="$(AR_FOR_TARGET)"; export AR_FOR_TARGET; \
AS_FOR_TARGET="$(AS_FOR_TARGET)"; export AS_FOR_TARGET; \
GCC_FOR_TARGET="$(GCC_FOR_TARGET)"; export GCC_FOR_TARGET; \
LD_FOR_TARGET="$(LD_FOR_TARGET)"; export LD_FOR_TARGET; \
NM_FOR_TARGET="$(NM_FOR_TARGET)"; export NM_FOR_TARGET; \
OBJDUMP_FOR_TARGET="$(OBJDUMP_FOR_TARGET)"; export OBJDUMP_FOR_TARGET; \
RANLIB_FOR_TARGET="$(RANLIB_FOR_TARGET)"; export RANLIB_FOR_TARGET; \
TOPLEVEL_CONFIGURE_ARGUMENTS="$(TOPLEVEL_CONFIGURE_ARGUMENTS)"; export TOPLEVEL_CONFIGURE_ARGUMENTS; \
GMPLIBS="$(HOST_GMPLIBS)"; export GMPLIBS; \
GMPINC="$(HOST_GMPINC)"; export GMPINC; \
@if gcc-bootstrap
$(RPATH_ENVVAR)=`echo "$(TARGET_LIB_PATH)$$$(RPATH_ENVVAR)" | sed 's,::*,:,g;s,^:*,,;s,:*$$,,'`; export $(RPATH_ENVVAR); \
@endif gcc-bootstrap
$(RPATH_ENVVAR)=`echo "$(HOST_LIB_PATH)$$$(RPATH_ENVVAR)" | sed 's,::*,:,g;s,^:*,,;s,:*$$,,'`; export $(RPATH_ENVVAR);
# Similar, for later GCC stages.
POSTSTAGE1_HOST_EXPORTS = \
$(HOST_EXPORTS) \
CC="$(STAGE_CC_WRAPPER) $$r/$(HOST_SUBDIR)/prev-gcc/xgcc$(exeext) \
-B$$r/$(HOST_SUBDIR)/prev-gcc/ -B$(build_tooldir)/bin/"; export CC; \
CC_FOR_BUILD="$(STAGE_CC_WRAPPER) \
$$r/$(HOST_SUBDIR)/prev-gcc/xgcc$(exeext) \
-B$$r/$(HOST_SUBDIR)/prev-gcc/ \
-B$(build_tooldir)/bin/"; export CC_FOR_BUILD;
# Target libraries are put under this directory:
TARGET_SUBDIR = @target_subdir@
# This is set by the configure script to the arguments to use when configuring
# directories built for the target.
TARGET_CONFIGARGS = @target_configargs@ --with-target-subdir="$(TARGET_SUBDIR)"
# This is the list of variables to export in the environment when
# configuring subdirectories for the host system.
BASE_TARGET_EXPORTS = \
$(BASE_EXPORTS) \
AR="$(AR_FOR_TARGET)"; export AR; \
toplevel: 2005-12-05 Paolo Bonzini <bonzini@gnu.org> Sync with gcc: 2005-12-05 Paolo Bonzini <bonzini@gnu.org> * configure.in (CONFIGURED_BISON, CONFIGURED_YACC, CONFIGURED_M4, CONFIGURED_FLEX, CONFIGURED_LEX, CONFIGURED_MAKEINFO): Remove "CONFIGURED_" from the AC_CHECK_PROGS invocation. Move below. Find in-tree tools if available. (EXPECT, RUNTEST, LIPO, STRIP): Find them and substitute them. (CONFIGURED_*_FOR_TARGET): Don't set nor substitute. (*_FOR_TARGET): Set them with GCC_TARGET_TOOL. (COMPILER_*_FOR_TARGET): New. * Makefile.tpl (HOST_EXPORTS): Add *_FOR_TARGET symbols that gcc needs. (BASE_TARGET_EXPORTS): Use COMPILER_*_FOR_TARGET symbols. (CONFIGURED_*, USUAL_*): Remove. (BISON, YACC, FLEX, LEX, M4, MAKEINFO, EXPECT, RUNTEST, LIPO, STRIP): Use autoconf substitutions. (COMPILER_AS_FOR_TARGET, COMPILER_LD_FOR_TARGET, COMPILER_NM_FOR_TARGET): New. (EXTRA_HOST_FLAGS): Pass LIPO and STRIP. (all): Make all-host and all-target in parallel. (do-[+make_target+], do-check, install, [+compare-target+]): Ensure that $$r and $$s are set before invoking a recursive make. (stage[+id+]-bubble): Likewise, and invoke the comparison at the end. ([+bootstrap-target+]): Inline most of the `all' target. 2005-11-29 Ben Elliston <bje@au.ibm.com> * Makefile.tpl (clean-target-libgcc): Invoke clean-target-libgcc from the gcc build directory. * Makefile.in: Regenerate. 2005-11-29 Ben Elliston <bje@au.ibm.com> * Makefile.def: Add new libdecnumber host_module. Make all-gcc depend on all-libdecnumber. * configure.in (host_libs): Include libdecnumber. * Makefile.in: Regenerate. * configure: Likewise. 2005-11-21 Kean Johnston <jkj@sco.com> * config.sub, config.guess: Sync from upstream sources. config: 2005-12-05 Paolo Bonzini <bonzini@gnu.org> * acx.m4 (GCC_TARGET_TOOL): New.
2005-12-05 16:16:05 +01:00
AS="$(COMPILER_AS_FOR_TARGET)"; export AS; \
CC="$(CC_FOR_TARGET)"; export CC; \
CFLAGS="$(CFLAGS_FOR_TARGET)"; export CFLAGS; \
CONFIG_SHELL="$(SHELL)"; export CONFIG_SHELL; \
CPPFLAGS="$(CPPFLAGS_FOR_TARGET)"; export CPPFLAGS; \
CXXFLAGS="$(CXXFLAGS_FOR_TARGET)"; export CXXFLAGS; \
GCJ="$(GCJ_FOR_TARGET)"; export GCJ; \
GFORTRAN="$(GFORTRAN_FOR_TARGET)"; export GFORTRAN; \
DLLTOOL="$(DLLTOOL_FOR_TARGET)"; export DLLTOOL; \
toplevel: 2005-12-05 Paolo Bonzini <bonzini@gnu.org> Sync with gcc: 2005-12-05 Paolo Bonzini <bonzini@gnu.org> * configure.in (CONFIGURED_BISON, CONFIGURED_YACC, CONFIGURED_M4, CONFIGURED_FLEX, CONFIGURED_LEX, CONFIGURED_MAKEINFO): Remove "CONFIGURED_" from the AC_CHECK_PROGS invocation. Move below. Find in-tree tools if available. (EXPECT, RUNTEST, LIPO, STRIP): Find them and substitute them. (CONFIGURED_*_FOR_TARGET): Don't set nor substitute. (*_FOR_TARGET): Set them with GCC_TARGET_TOOL. (COMPILER_*_FOR_TARGET): New. * Makefile.tpl (HOST_EXPORTS): Add *_FOR_TARGET symbols that gcc needs. (BASE_TARGET_EXPORTS): Use COMPILER_*_FOR_TARGET symbols. (CONFIGURED_*, USUAL_*): Remove. (BISON, YACC, FLEX, LEX, M4, MAKEINFO, EXPECT, RUNTEST, LIPO, STRIP): Use autoconf substitutions. (COMPILER_AS_FOR_TARGET, COMPILER_LD_FOR_TARGET, COMPILER_NM_FOR_TARGET): New. (EXTRA_HOST_FLAGS): Pass LIPO and STRIP. (all): Make all-host and all-target in parallel. (do-[+make_target+], do-check, install, [+compare-target+]): Ensure that $$r and $$s are set before invoking a recursive make. (stage[+id+]-bubble): Likewise, and invoke the comparison at the end. ([+bootstrap-target+]): Inline most of the `all' target. 2005-11-29 Ben Elliston <bje@au.ibm.com> * Makefile.tpl (clean-target-libgcc): Invoke clean-target-libgcc from the gcc build directory. * Makefile.in: Regenerate. 2005-11-29 Ben Elliston <bje@au.ibm.com> * Makefile.def: Add new libdecnumber host_module. Make all-gcc depend on all-libdecnumber. * configure.in (host_libs): Include libdecnumber. * Makefile.in: Regenerate. * configure: Likewise. 2005-11-21 Kean Johnston <jkj@sco.com> * config.sub, config.guess: Sync from upstream sources. config: 2005-12-05 Paolo Bonzini <bonzini@gnu.org> * acx.m4 (GCC_TARGET_TOOL): New.
2005-12-05 16:16:05 +01:00
LD="$(COMPILER_LD_FOR_TARGET)"; export LD; \
LDFLAGS="$(LDFLAGS_FOR_TARGET)"; export LDFLAGS; \
Index: ChangeLog 2005-09-28 Geoffrey Keating <geoffk@apple.com> * Makefile.tpl (BASE_TARGET_EXPORTS): Add LIPO, STRIP. (LIPO_FOR_TARGET): New. (CONFIGURED_LIPO_FOR_TARGET): New. (USUAL_LIPO_FOR_TARGET): New. (STRIP_FOR_TARGET): New. (CONFIGURED_STRIP_FOR_TARGET): New. (USUAL_STRIP_FOR_TARGET): New. * Makefile.def (flags_to_pass): Add LIPO_FOR_TARGET and STRIP_FOR_TARGET. * configure.in: Set LIPO_FOR_TARGET, STRIP_FOR_TARGET, CONFIGURED_LIPO_FOR_TARGET, CONFIGURED_STRIP_FOR_TARGET. * Makefile.in: Regenerate. * configure.in: Regenerate. Index: gcc/ChangeLog 2005-09-28 Geoffrey Keating <geoffk@apple.com> * Makefile.in: Export LIPO_FOR_TARGET, STRIP_FOR_TARGET. (stage1-start): Delete old libgcc and libunwind before moving anything into the stage directory. (stage2-start): Likewise. (stage3-start): Likewise. (stage4-start): Likewise. (stageprofile-start): Likewise. (stagefeedback-start): Likewise. * config.gcc (*-*-darwin*): Automatically use CPU-specific darwin.h header in tm_file and CPU-specific t-darwin in tmake_file. (i[34567]86-*-darwin*): Don't change tm_file. (powerpc-*-darwin*): Don't change tm_file or tmake_file. * config/darwin.h (REAL_LIBGCC_SPEC): Rewrite to use proper libgcc shared library stub for target OS version. * config/t-slibgcc-darwin (SHLIB_SOLINK): Delete. (SHLIB_LINK): Don't make SHLIB_SOLINK. (SHLIB_INSTALL): Don't install SHLIB_SOLINK. (libgcc_s.%.dylib): New. (LIBGCC): Define. (install-darwin-libgcc-stubs): New. (INSTALL_LIBGCC): New append. * config/i386/darwin-libgcc.10.4.ver: New. * config/i386/darwin-libgcc.10.5.ver: New. * config/i386/t-darwin: New. * config/rs6000/darwin-libgcc.10.4.ver: New. * config/rs6000/darwin-libgcc.10.5.ver: New. * config/rs6000/darwin.h (REAL_LIBGCC_SPEC): Delete. * config/rs6000/t-darwin (SHLIB_VERPFX): Define.
2005-09-29 03:00:26 +02:00
LIPO="$(LIPO_FOR_TARGET)"; export LIPO; \
toplevel: 2005-12-05 Paolo Bonzini <bonzini@gnu.org> Sync with gcc: 2005-12-05 Paolo Bonzini <bonzini@gnu.org> * configure.in (CONFIGURED_BISON, CONFIGURED_YACC, CONFIGURED_M4, CONFIGURED_FLEX, CONFIGURED_LEX, CONFIGURED_MAKEINFO): Remove "CONFIGURED_" from the AC_CHECK_PROGS invocation. Move below. Find in-tree tools if available. (EXPECT, RUNTEST, LIPO, STRIP): Find them and substitute them. (CONFIGURED_*_FOR_TARGET): Don't set nor substitute. (*_FOR_TARGET): Set them with GCC_TARGET_TOOL. (COMPILER_*_FOR_TARGET): New. * Makefile.tpl (HOST_EXPORTS): Add *_FOR_TARGET symbols that gcc needs. (BASE_TARGET_EXPORTS): Use COMPILER_*_FOR_TARGET symbols. (CONFIGURED_*, USUAL_*): Remove. (BISON, YACC, FLEX, LEX, M4, MAKEINFO, EXPECT, RUNTEST, LIPO, STRIP): Use autoconf substitutions. (COMPILER_AS_FOR_TARGET, COMPILER_LD_FOR_TARGET, COMPILER_NM_FOR_TARGET): New. (EXTRA_HOST_FLAGS): Pass LIPO and STRIP. (all): Make all-host and all-target in parallel. (do-[+make_target+], do-check, install, [+compare-target+]): Ensure that $$r and $$s are set before invoking a recursive make. (stage[+id+]-bubble): Likewise, and invoke the comparison at the end. ([+bootstrap-target+]): Inline most of the `all' target. 2005-11-29 Ben Elliston <bje@au.ibm.com> * Makefile.tpl (clean-target-libgcc): Invoke clean-target-libgcc from the gcc build directory. * Makefile.in: Regenerate. 2005-11-29 Ben Elliston <bje@au.ibm.com> * Makefile.def: Add new libdecnumber host_module. Make all-gcc depend on all-libdecnumber. * configure.in (host_libs): Include libdecnumber. * Makefile.in: Regenerate. * configure: Likewise. 2005-11-21 Kean Johnston <jkj@sco.com> * config.sub, config.guess: Sync from upstream sources. config: 2005-12-05 Paolo Bonzini <bonzini@gnu.org> * acx.m4 (GCC_TARGET_TOOL): New.
2005-12-05 16:16:05 +01:00
NM="$(COMPILER_NM_FOR_TARGET)"; export NM; \
OBJDUMP="$(OBJDUMP_FOR_TARGET)"; export OBJDUMP; \
RANLIB="$(RANLIB_FOR_TARGET)"; export RANLIB; \
Index: ChangeLog 2005-09-28 Geoffrey Keating <geoffk@apple.com> * Makefile.tpl (BASE_TARGET_EXPORTS): Add LIPO, STRIP. (LIPO_FOR_TARGET): New. (CONFIGURED_LIPO_FOR_TARGET): New. (USUAL_LIPO_FOR_TARGET): New. (STRIP_FOR_TARGET): New. (CONFIGURED_STRIP_FOR_TARGET): New. (USUAL_STRIP_FOR_TARGET): New. * Makefile.def (flags_to_pass): Add LIPO_FOR_TARGET and STRIP_FOR_TARGET. * configure.in: Set LIPO_FOR_TARGET, STRIP_FOR_TARGET, CONFIGURED_LIPO_FOR_TARGET, CONFIGURED_STRIP_FOR_TARGET. * Makefile.in: Regenerate. * configure.in: Regenerate. Index: gcc/ChangeLog 2005-09-28 Geoffrey Keating <geoffk@apple.com> * Makefile.in: Export LIPO_FOR_TARGET, STRIP_FOR_TARGET. (stage1-start): Delete old libgcc and libunwind before moving anything into the stage directory. (stage2-start): Likewise. (stage3-start): Likewise. (stage4-start): Likewise. (stageprofile-start): Likewise. (stagefeedback-start): Likewise. * config.gcc (*-*-darwin*): Automatically use CPU-specific darwin.h header in tm_file and CPU-specific t-darwin in tmake_file. (i[34567]86-*-darwin*): Don't change tm_file. (powerpc-*-darwin*): Don't change tm_file or tmake_file. * config/darwin.h (REAL_LIBGCC_SPEC): Rewrite to use proper libgcc shared library stub for target OS version. * config/t-slibgcc-darwin (SHLIB_SOLINK): Delete. (SHLIB_LINK): Don't make SHLIB_SOLINK. (SHLIB_INSTALL): Don't install SHLIB_SOLINK. (libgcc_s.%.dylib): New. (LIBGCC): Define. (install-darwin-libgcc-stubs): New. (INSTALL_LIBGCC): New append. * config/i386/darwin-libgcc.10.4.ver: New. * config/i386/darwin-libgcc.10.5.ver: New. * config/i386/t-darwin: New. * config/rs6000/darwin-libgcc.10.4.ver: New. * config/rs6000/darwin-libgcc.10.5.ver: New. * config/rs6000/darwin.h (REAL_LIBGCC_SPEC): Delete. * config/rs6000/t-darwin (SHLIB_VERPFX): Define.
2005-09-29 03:00:26 +02:00
STRIP="$(STRIP_FOR_TARGET)"; export STRIP; \
WINDRES="$(WINDRES_FOR_TARGET)"; export WINDRES; \
$(RPATH_ENVVAR)=`echo "$(HOST_LIB_PATH)$(TARGET_LIB_PATH)$$$(RPATH_ENVVAR)" | sed 's,::*,:,g;s,^:*,,;s,:*$$,,'`; export $(RPATH_ENVVAR);
RAW_CXX_TARGET_EXPORTS = \
$(BASE_TARGET_EXPORTS) \
CXX_FOR_TARGET="$(RAW_CXX_FOR_TARGET)"; export CXX_FOR_TARGET; \
CXX="$(RAW_CXX_FOR_TARGET)"; export CXX;
NORMAL_TARGET_EXPORTS = \
$(BASE_TARGET_EXPORTS) \
CXX="$(CXX_FOR_TARGET)"; export CXX;
2004-05-13 20:14:28 +02:00
# Where to find GMP
HOST_GMPLIBS = @gmplibs@
HOST_GMPINC = @gmpinc@
# ----------------------------------------------
# Programs producing files for the BUILD machine
# ----------------------------------------------
SHELL = @config_shell@
# pwd command to use. Allow user to override default by setting PWDCMD in
# the environment to account for automounters. The make variable must not
# be called PWDCMD, otherwise the value set here is passed to make
# subprocesses and overrides the setting from the user's environment.
# Don't use PWD since it is a common shell environment variable and we
# don't want to corrupt it.
PWD_COMMAND = $${PWDCMD-pwd}
# compilers to use to create programs which must be run in the build
# environment.
CC_FOR_BUILD = @CC_FOR_BUILD@
CFLAGS_FOR_BUILD = @CFLAGS_FOR_BUILD@
CXX_FOR_BUILD = $(CXX)
# Special variables passed down in EXTRA_GCC_FLAGS. They are defined
# here so that they can be overridden by Makefile fragments.
BUILD_PREFIX = @BUILD_PREFIX@
BUILD_PREFIX_1 = @BUILD_PREFIX_1@
# Flags to pass to stage2 and later makes. They are defined
# here so that they can be overridden by Makefile fragments.
BOOT_CFLAGS= -g -O2
BOOT_LDFLAGS=
toplevel: 2005-12-05 Paolo Bonzini <bonzini@gnu.org> Sync with gcc: 2005-12-05 Paolo Bonzini <bonzini@gnu.org> * configure.in (CONFIGURED_BISON, CONFIGURED_YACC, CONFIGURED_M4, CONFIGURED_FLEX, CONFIGURED_LEX, CONFIGURED_MAKEINFO): Remove "CONFIGURED_" from the AC_CHECK_PROGS invocation. Move below. Find in-tree tools if available. (EXPECT, RUNTEST, LIPO, STRIP): Find them and substitute them. (CONFIGURED_*_FOR_TARGET): Don't set nor substitute. (*_FOR_TARGET): Set them with GCC_TARGET_TOOL. (COMPILER_*_FOR_TARGET): New. * Makefile.tpl (HOST_EXPORTS): Add *_FOR_TARGET symbols that gcc needs. (BASE_TARGET_EXPORTS): Use COMPILER_*_FOR_TARGET symbols. (CONFIGURED_*, USUAL_*): Remove. (BISON, YACC, FLEX, LEX, M4, MAKEINFO, EXPECT, RUNTEST, LIPO, STRIP): Use autoconf substitutions. (COMPILER_AS_FOR_TARGET, COMPILER_LD_FOR_TARGET, COMPILER_NM_FOR_TARGET): New. (EXTRA_HOST_FLAGS): Pass LIPO and STRIP. (all): Make all-host and all-target in parallel. (do-[+make_target+], do-check, install, [+compare-target+]): Ensure that $$r and $$s are set before invoking a recursive make. (stage[+id+]-bubble): Likewise, and invoke the comparison at the end. ([+bootstrap-target+]): Inline most of the `all' target. 2005-11-29 Ben Elliston <bje@au.ibm.com> * Makefile.tpl (clean-target-libgcc): Invoke clean-target-libgcc from the gcc build directory. * Makefile.in: Regenerate. 2005-11-29 Ben Elliston <bje@au.ibm.com> * Makefile.def: Add new libdecnumber host_module. Make all-gcc depend on all-libdecnumber. * configure.in (host_libs): Include libdecnumber. * Makefile.in: Regenerate. * configure: Likewise. 2005-11-21 Kean Johnston <jkj@sco.com> * config.sub, config.guess: Sync from upstream sources. config: 2005-12-05 Paolo Bonzini <bonzini@gnu.org> * acx.m4 (GCC_TARGET_TOOL): New.
2005-12-05 16:16:05 +01:00
BISON = @BISON@
YACC = @YACC@
FLEX = @FLEX@
LEX = @LEX@
M4 = @M4@
MAKEINFO = @MAKEINFO@
EXPECT = @EXPECT@
RUNTEST = @RUNTEST@
# This just becomes part of the MAKEINFO definition passed down to
# sub-makes. It lets flags be given on the command line while still
# using the makeinfo from the object tree.
# (Default to avoid splitting info files by setting the threshold high.)
MAKEINFOFLAGS = --split-size=5000000
# ---------------------------------------------
# Programs producing files for the HOST machine
# ---------------------------------------------
AS = @AS@
AR = @AR@
AR_FLAGS = rc
CC = @CC@
CXX = @CXX@
DLLTOOL = @DLLTOOL@
LD = @LD@
toplevel: 2005-12-05 Paolo Bonzini <bonzini@gnu.org> Sync with gcc: 2005-12-05 Paolo Bonzini <bonzini@gnu.org> * configure.in (CONFIGURED_BISON, CONFIGURED_YACC, CONFIGURED_M4, CONFIGURED_FLEX, CONFIGURED_LEX, CONFIGURED_MAKEINFO): Remove "CONFIGURED_" from the AC_CHECK_PROGS invocation. Move below. Find in-tree tools if available. (EXPECT, RUNTEST, LIPO, STRIP): Find them and substitute them. (CONFIGURED_*_FOR_TARGET): Don't set nor substitute. (*_FOR_TARGET): Set them with GCC_TARGET_TOOL. (COMPILER_*_FOR_TARGET): New. * Makefile.tpl (HOST_EXPORTS): Add *_FOR_TARGET symbols that gcc needs. (BASE_TARGET_EXPORTS): Use COMPILER_*_FOR_TARGET symbols. (CONFIGURED_*, USUAL_*): Remove. (BISON, YACC, FLEX, LEX, M4, MAKEINFO, EXPECT, RUNTEST, LIPO, STRIP): Use autoconf substitutions. (COMPILER_AS_FOR_TARGET, COMPILER_LD_FOR_TARGET, COMPILER_NM_FOR_TARGET): New. (EXTRA_HOST_FLAGS): Pass LIPO and STRIP. (all): Make all-host and all-target in parallel. (do-[+make_target+], do-check, install, [+compare-target+]): Ensure that $$r and $$s are set before invoking a recursive make. (stage[+id+]-bubble): Likewise, and invoke the comparison at the end. ([+bootstrap-target+]): Inline most of the `all' target. 2005-11-29 Ben Elliston <bje@au.ibm.com> * Makefile.tpl (clean-target-libgcc): Invoke clean-target-libgcc from the gcc build directory. * Makefile.in: Regenerate. 2005-11-29 Ben Elliston <bje@au.ibm.com> * Makefile.def: Add new libdecnumber host_module. Make all-gcc depend on all-libdecnumber. * configure.in (host_libs): Include libdecnumber. * Makefile.in: Regenerate. * configure: Likewise. 2005-11-21 Kean Johnston <jkj@sco.com> * config.sub, config.guess: Sync from upstream sources. config: 2005-12-05 Paolo Bonzini <bonzini@gnu.org> * acx.m4 (GCC_TARGET_TOOL): New.
2005-12-05 16:16:05 +01:00
LIPO = @LIPO@
NM = @NM@
OBJDUMP = @OBJDUMP@
RANLIB = @RANLIB@
toplevel: 2005-12-05 Paolo Bonzini <bonzini@gnu.org> Sync with gcc: 2005-12-05 Paolo Bonzini <bonzini@gnu.org> * configure.in (CONFIGURED_BISON, CONFIGURED_YACC, CONFIGURED_M4, CONFIGURED_FLEX, CONFIGURED_LEX, CONFIGURED_MAKEINFO): Remove "CONFIGURED_" from the AC_CHECK_PROGS invocation. Move below. Find in-tree tools if available. (EXPECT, RUNTEST, LIPO, STRIP): Find them and substitute them. (CONFIGURED_*_FOR_TARGET): Don't set nor substitute. (*_FOR_TARGET): Set them with GCC_TARGET_TOOL. (COMPILER_*_FOR_TARGET): New. * Makefile.tpl (HOST_EXPORTS): Add *_FOR_TARGET symbols that gcc needs. (BASE_TARGET_EXPORTS): Use COMPILER_*_FOR_TARGET symbols. (CONFIGURED_*, USUAL_*): Remove. (BISON, YACC, FLEX, LEX, M4, MAKEINFO, EXPECT, RUNTEST, LIPO, STRIP): Use autoconf substitutions. (COMPILER_AS_FOR_TARGET, COMPILER_LD_FOR_TARGET, COMPILER_NM_FOR_TARGET): New. (EXTRA_HOST_FLAGS): Pass LIPO and STRIP. (all): Make all-host and all-target in parallel. (do-[+make_target+], do-check, install, [+compare-target+]): Ensure that $$r and $$s are set before invoking a recursive make. (stage[+id+]-bubble): Likewise, and invoke the comparison at the end. ([+bootstrap-target+]): Inline most of the `all' target. 2005-11-29 Ben Elliston <bje@au.ibm.com> * Makefile.tpl (clean-target-libgcc): Invoke clean-target-libgcc from the gcc build directory. * Makefile.in: Regenerate. 2005-11-29 Ben Elliston <bje@au.ibm.com> * Makefile.def: Add new libdecnumber host_module. Make all-gcc depend on all-libdecnumber. * configure.in (host_libs): Include libdecnumber. * Makefile.in: Regenerate. * configure: Likewise. 2005-11-21 Kean Johnston <jkj@sco.com> * config.sub, config.guess: Sync from upstream sources. config: 2005-12-05 Paolo Bonzini <bonzini@gnu.org> * acx.m4 (GCC_TARGET_TOOL): New.
2005-12-05 16:16:05 +01:00
STRIP = @STRIP@
WINDRES = @WINDRES@
toplevel: 2005-12-05 Paolo Bonzini <bonzini@gnu.org> Sync with gcc: 2005-12-05 Paolo Bonzini <bonzini@gnu.org> * configure.in (CONFIGURED_BISON, CONFIGURED_YACC, CONFIGURED_M4, CONFIGURED_FLEX, CONFIGURED_LEX, CONFIGURED_MAKEINFO): Remove "CONFIGURED_" from the AC_CHECK_PROGS invocation. Move below. Find in-tree tools if available. (EXPECT, RUNTEST, LIPO, STRIP): Find them and substitute them. (CONFIGURED_*_FOR_TARGET): Don't set nor substitute. (*_FOR_TARGET): Set them with GCC_TARGET_TOOL. (COMPILER_*_FOR_TARGET): New. * Makefile.tpl (HOST_EXPORTS): Add *_FOR_TARGET symbols that gcc needs. (BASE_TARGET_EXPORTS): Use COMPILER_*_FOR_TARGET symbols. (CONFIGURED_*, USUAL_*): Remove. (BISON, YACC, FLEX, LEX, M4, MAKEINFO, EXPECT, RUNTEST, LIPO, STRIP): Use autoconf substitutions. (COMPILER_AS_FOR_TARGET, COMPILER_LD_FOR_TARGET, COMPILER_NM_FOR_TARGET): New. (EXTRA_HOST_FLAGS): Pass LIPO and STRIP. (all): Make all-host and all-target in parallel. (do-[+make_target+], do-check, install, [+compare-target+]): Ensure that $$r and $$s are set before invoking a recursive make. (stage[+id+]-bubble): Likewise, and invoke the comparison at the end. ([+bootstrap-target+]): Inline most of the `all' target. 2005-11-29 Ben Elliston <bje@au.ibm.com> * Makefile.tpl (clean-target-libgcc): Invoke clean-target-libgcc from the gcc build directory. * Makefile.in: Regenerate. 2005-11-29 Ben Elliston <bje@au.ibm.com> * Makefile.def: Add new libdecnumber host_module. Make all-gcc depend on all-libdecnumber. * configure.in (host_libs): Include libdecnumber. * Makefile.in: Regenerate. * configure: Likewise. 2005-11-21 Kean Johnston <jkj@sco.com> * config.sub, config.guess: Sync from upstream sources. config: 2005-12-05 Paolo Bonzini <bonzini@gnu.org> * acx.m4 (GCC_TARGET_TOOL): New.
2005-12-05 16:16:05 +01:00
CFLAGS = @CFLAGS@
LDFLAGS =
LIBCFLAGS = $(CFLAGS)
CXXFLAGS = @CXXFLAGS@
LIBCXXFLAGS = $(CXXFLAGS) -fno-implicit-templates
PICFLAG =
# -----------------------------------------------
# Programs producing files for the TARGET machine
# -----------------------------------------------
FLAGS_FOR_TARGET = @FLAGS_FOR_TARGET@
AR_FOR_TARGET=@AR_FOR_TARGET@
AS_FOR_TARGET=@AS_FOR_TARGET@
CC_FOR_TARGET=$(STAGE_CC_WRAPPER) @CC_FOR_TARGET@ $(FLAGS_FOR_TARGET)
# If GCC_FOR_TARGET is not overriden on the command line, then this
# variable is passed down to the gcc Makefile, where it is used to
# build libgcc2.a. We define it here so that it can itself be
# overridden on the command line.
toplevel: 2005-12-05 Paolo Bonzini <bonzini@gnu.org> Sync with gcc: 2005-12-05 Paolo Bonzini <bonzini@gnu.org> * configure.in (CONFIGURED_BISON, CONFIGURED_YACC, CONFIGURED_M4, CONFIGURED_FLEX, CONFIGURED_LEX, CONFIGURED_MAKEINFO): Remove "CONFIGURED_" from the AC_CHECK_PROGS invocation. Move below. Find in-tree tools if available. (EXPECT, RUNTEST, LIPO, STRIP): Find them and substitute them. (CONFIGURED_*_FOR_TARGET): Don't set nor substitute. (*_FOR_TARGET): Set them with GCC_TARGET_TOOL. (COMPILER_*_FOR_TARGET): New. * Makefile.tpl (HOST_EXPORTS): Add *_FOR_TARGET symbols that gcc needs. (BASE_TARGET_EXPORTS): Use COMPILER_*_FOR_TARGET symbols. (CONFIGURED_*, USUAL_*): Remove. (BISON, YACC, FLEX, LEX, M4, MAKEINFO, EXPECT, RUNTEST, LIPO, STRIP): Use autoconf substitutions. (COMPILER_AS_FOR_TARGET, COMPILER_LD_FOR_TARGET, COMPILER_NM_FOR_TARGET): New. (EXTRA_HOST_FLAGS): Pass LIPO and STRIP. (all): Make all-host and all-target in parallel. (do-[+make_target+], do-check, install, [+compare-target+]): Ensure that $$r and $$s are set before invoking a recursive make. (stage[+id+]-bubble): Likewise, and invoke the comparison at the end. ([+bootstrap-target+]): Inline most of the `all' target. 2005-11-29 Ben Elliston <bje@au.ibm.com> * Makefile.tpl (clean-target-libgcc): Invoke clean-target-libgcc from the gcc build directory. * Makefile.in: Regenerate. 2005-11-29 Ben Elliston <bje@au.ibm.com> * Makefile.def: Add new libdecnumber host_module. Make all-gcc depend on all-libdecnumber. * configure.in (host_libs): Include libdecnumber. * Makefile.in: Regenerate. * configure: Likewise. 2005-11-21 Kean Johnston <jkj@sco.com> * config.sub, config.guess: Sync from upstream sources. config: 2005-12-05 Paolo Bonzini <bonzini@gnu.org> * acx.m4 (GCC_TARGET_TOOL): New.
2005-12-05 16:16:05 +01:00
GCC_FOR_TARGET=$(STAGE_CC_WRAPPER) @GCC_FOR_TARGET@ $(FLAGS_FOR_TARGET)
CXX_FOR_TARGET=$(STAGE_CC_WRAPPER) @CXX_FOR_TARGET@ $(FLAGS_FOR_TARGET)
RAW_CXX_FOR_TARGET=$(STAGE_CC_WRAPPER) @RAW_CXX_FOR_TARGET@ $(FLAGS_FOR_TARGET)
GCJ_FOR_TARGET=$(STAGE_CC_WRAPPER) @GCJ_FOR_TARGET@ $(FLAGS_FOR_TARGET)
GFORTRAN_FOR_TARGET=$(STAGE_CC_WRAPPER) @GFORTRAN_FOR_TARGET@ $(FLAGS_FOR_TARGET)
DLLTOOL_FOR_TARGET=@DLLTOOL_FOR_TARGET@
LD_FOR_TARGET=@LD_FOR_TARGET@
Index: ChangeLog 2005-09-28 Geoffrey Keating <geoffk@apple.com> * Makefile.tpl (BASE_TARGET_EXPORTS): Add LIPO, STRIP. (LIPO_FOR_TARGET): New. (CONFIGURED_LIPO_FOR_TARGET): New. (USUAL_LIPO_FOR_TARGET): New. (STRIP_FOR_TARGET): New. (CONFIGURED_STRIP_FOR_TARGET): New. (USUAL_STRIP_FOR_TARGET): New. * Makefile.def (flags_to_pass): Add LIPO_FOR_TARGET and STRIP_FOR_TARGET. * configure.in: Set LIPO_FOR_TARGET, STRIP_FOR_TARGET, CONFIGURED_LIPO_FOR_TARGET, CONFIGURED_STRIP_FOR_TARGET. * Makefile.in: Regenerate. * configure.in: Regenerate. Index: gcc/ChangeLog 2005-09-28 Geoffrey Keating <geoffk@apple.com> * Makefile.in: Export LIPO_FOR_TARGET, STRIP_FOR_TARGET. (stage1-start): Delete old libgcc and libunwind before moving anything into the stage directory. (stage2-start): Likewise. (stage3-start): Likewise. (stage4-start): Likewise. (stageprofile-start): Likewise. (stagefeedback-start): Likewise. * config.gcc (*-*-darwin*): Automatically use CPU-specific darwin.h header in tm_file and CPU-specific t-darwin in tmake_file. (i[34567]86-*-darwin*): Don't change tm_file. (powerpc-*-darwin*): Don't change tm_file or tmake_file. * config/darwin.h (REAL_LIBGCC_SPEC): Rewrite to use proper libgcc shared library stub for target OS version. * config/t-slibgcc-darwin (SHLIB_SOLINK): Delete. (SHLIB_LINK): Don't make SHLIB_SOLINK. (SHLIB_INSTALL): Don't install SHLIB_SOLINK. (libgcc_s.%.dylib): New. (LIBGCC): Define. (install-darwin-libgcc-stubs): New. (INSTALL_LIBGCC): New append. * config/i386/darwin-libgcc.10.4.ver: New. * config/i386/darwin-libgcc.10.5.ver: New. * config/i386/t-darwin: New. * config/rs6000/darwin-libgcc.10.4.ver: New. * config/rs6000/darwin-libgcc.10.5.ver: New. * config/rs6000/darwin.h (REAL_LIBGCC_SPEC): Delete. * config/rs6000/t-darwin (SHLIB_VERPFX): Define.
2005-09-29 03:00:26 +02:00
LIPO_FOR_TARGET=@LIPO_FOR_TARGET@
NM_FOR_TARGET=@NM_FOR_TARGET@
OBJDUMP_FOR_TARGET=@OBJDUMP_FOR_TARGET@
RANLIB_FOR_TARGET=@RANLIB_FOR_TARGET@
Index: ChangeLog 2005-09-28 Geoffrey Keating <geoffk@apple.com> * Makefile.tpl (BASE_TARGET_EXPORTS): Add LIPO, STRIP. (LIPO_FOR_TARGET): New. (CONFIGURED_LIPO_FOR_TARGET): New. (USUAL_LIPO_FOR_TARGET): New. (STRIP_FOR_TARGET): New. (CONFIGURED_STRIP_FOR_TARGET): New. (USUAL_STRIP_FOR_TARGET): New. * Makefile.def (flags_to_pass): Add LIPO_FOR_TARGET and STRIP_FOR_TARGET. * configure.in: Set LIPO_FOR_TARGET, STRIP_FOR_TARGET, CONFIGURED_LIPO_FOR_TARGET, CONFIGURED_STRIP_FOR_TARGET. * Makefile.in: Regenerate. * configure.in: Regenerate. Index: gcc/ChangeLog 2005-09-28 Geoffrey Keating <geoffk@apple.com> * Makefile.in: Export LIPO_FOR_TARGET, STRIP_FOR_TARGET. (stage1-start): Delete old libgcc and libunwind before moving anything into the stage directory. (stage2-start): Likewise. (stage3-start): Likewise. (stage4-start): Likewise. (stageprofile-start): Likewise. (stagefeedback-start): Likewise. * config.gcc (*-*-darwin*): Automatically use CPU-specific darwin.h header in tm_file and CPU-specific t-darwin in tmake_file. (i[34567]86-*-darwin*): Don't change tm_file. (powerpc-*-darwin*): Don't change tm_file or tmake_file. * config/darwin.h (REAL_LIBGCC_SPEC): Rewrite to use proper libgcc shared library stub for target OS version. * config/t-slibgcc-darwin (SHLIB_SOLINK): Delete. (SHLIB_LINK): Don't make SHLIB_SOLINK. (SHLIB_INSTALL): Don't install SHLIB_SOLINK. (libgcc_s.%.dylib): New. (LIBGCC): Define. (install-darwin-libgcc-stubs): New. (INSTALL_LIBGCC): New append. * config/i386/darwin-libgcc.10.4.ver: New. * config/i386/darwin-libgcc.10.5.ver: New. * config/i386/t-darwin: New. * config/rs6000/darwin-libgcc.10.4.ver: New. * config/rs6000/darwin-libgcc.10.5.ver: New. * config/rs6000/darwin.h (REAL_LIBGCC_SPEC): Delete. * config/rs6000/t-darwin (SHLIB_VERPFX): Define.
2005-09-29 03:00:26 +02:00
STRIP_FOR_TARGET=@STRIP_FOR_TARGET@
WINDRES_FOR_TARGET=@WINDRES_FOR_TARGET@
toplevel: 2005-12-05 Paolo Bonzini <bonzini@gnu.org> Sync with gcc: 2005-12-05 Paolo Bonzini <bonzini@gnu.org> * configure.in (CONFIGURED_BISON, CONFIGURED_YACC, CONFIGURED_M4, CONFIGURED_FLEX, CONFIGURED_LEX, CONFIGURED_MAKEINFO): Remove "CONFIGURED_" from the AC_CHECK_PROGS invocation. Move below. Find in-tree tools if available. (EXPECT, RUNTEST, LIPO, STRIP): Find them and substitute them. (CONFIGURED_*_FOR_TARGET): Don't set nor substitute. (*_FOR_TARGET): Set them with GCC_TARGET_TOOL. (COMPILER_*_FOR_TARGET): New. * Makefile.tpl (HOST_EXPORTS): Add *_FOR_TARGET symbols that gcc needs. (BASE_TARGET_EXPORTS): Use COMPILER_*_FOR_TARGET symbols. (CONFIGURED_*, USUAL_*): Remove. (BISON, YACC, FLEX, LEX, M4, MAKEINFO, EXPECT, RUNTEST, LIPO, STRIP): Use autoconf substitutions. (COMPILER_AS_FOR_TARGET, COMPILER_LD_FOR_TARGET, COMPILER_NM_FOR_TARGET): New. (EXTRA_HOST_FLAGS): Pass LIPO and STRIP. (all): Make all-host and all-target in parallel. (do-[+make_target+], do-check, install, [+compare-target+]): Ensure that $$r and $$s are set before invoking a recursive make. (stage[+id+]-bubble): Likewise, and invoke the comparison at the end. ([+bootstrap-target+]): Inline most of the `all' target. 2005-11-29 Ben Elliston <bje@au.ibm.com> * Makefile.tpl (clean-target-libgcc): Invoke clean-target-libgcc from the gcc build directory. * Makefile.in: Regenerate. 2005-11-29 Ben Elliston <bje@au.ibm.com> * Makefile.def: Add new libdecnumber host_module. Make all-gcc depend on all-libdecnumber. * configure.in (host_libs): Include libdecnumber. * Makefile.in: Regenerate. * configure: Likewise. 2005-11-21 Kean Johnston <jkj@sco.com> * config.sub, config.guess: Sync from upstream sources. config: 2005-12-05 Paolo Bonzini <bonzini@gnu.org> * acx.m4 (GCC_TARGET_TOOL): New.
2005-12-05 16:16:05 +01:00
COMPILER_AS_FOR_TARGET=@COMPILER_AS_FOR_TARGET@
COMPILER_LD_FOR_TARGET=@COMPILER_LD_FOR_TARGET@
COMPILER_NM_FOR_TARGET=@COMPILER_NM_FOR_TARGET@
# During gcc bootstrap, if we use some random cc for stage1 then
# CFLAGS will be just -g. We want to ensure that TARGET libraries
# (which we know are built with gcc) are built with optimizations so
# prepend -O2 when setting CFLAGS_FOR_TARGET.
CFLAGS_FOR_TARGET = -O2 $(CFLAGS) $(SYSROOT_CFLAGS_FOR_TARGET)
SYSROOT_CFLAGS_FOR_TARGET = @SYSROOT_CFLAGS_FOR_TARGET@
CXXFLAGS_FOR_TARGET = $(CXXFLAGS) $(SYSROOT_CFLAGS_FOR_TARGET)
LIBCFLAGS_FOR_TARGET = $(CFLAGS_FOR_TARGET)
LIBCXXFLAGS_FOR_TARGET = $(CXXFLAGS_FOR_TARGET) -fno-implicit-templates
LDFLAGS_FOR_TARGET =
PICFLAG_FOR_TARGET =
# ------------------------------------
# Miscellaneous targets and flag lists
# ------------------------------------
# The first rule in the file had better be this one. Don't put any above it.
# This lives here to allow makefile fragments to contain dependencies.
all:
#### host and target specific makefile fragments come in here.
@target_makefile_frag@
@alphaieee_frag@
@ospace_frag@
@host_makefile_frag@
###
# This is the list of directories that may be needed in RPATH_ENVVAR
# so that prorgams built for the target machine work.
TARGET_LIB_PATH = [+ FOR target_modules +][+
IF lib_path +]$(TARGET_LIB_PATH_[+module+])[+ ENDIF lib_path +][+
ENDFOR target_modules +]$(HOST_LIB_PATH_gcc)
[+ FOR target_modules +][+ IF lib_path +]
@if target-[+module+]
TARGET_LIB_PATH_[+module+] = $$r/$(TARGET_SUBDIR)/[+module+]/[+lib_path+]:
@endif target-[+module+]
[+ ENDIF lib_path +][+ ENDFOR target_modules +]
# This is the list of directories that may be needed in RPATH_ENVVAR
# so that programs built for the host machine work.
HOST_LIB_PATH = [+ FOR host_modules +][+
IF lib_path +]$(HOST_LIB_PATH_[+module+])[+ ENDIF lib_path +][+
ENDFOR host_modules +]
# Define HOST_LIB_PATH_gcc here, for the sake of TARGET_LIB_PATH, ouch
@if gcc
HOST_LIB_PATH_gcc = $$r/$(HOST_SUBDIR)/gcc:$$r/$(HOST_SUBDIR)/prev-gcc:
@endif gcc
[+ FOR host_modules +][+ IF lib_path +]
@if [+module+]
HOST_LIB_PATH_[+module+] = \
$$r/$(HOST_SUBDIR)/[+module+]/[+lib_path+]:[+ IF bootstrap
+]$$r/$(HOST_SUBDIR)/prev-[+module+]/[+lib_path+]:[+ ENDIF bootstrap +]
@endif [+module+]
[+ ENDIF lib_path +][+ ENDFOR host_modules +]
# Flags to pass down to all sub-makes.
BASE_FLAGS_TO_PASS =[+ FOR flags_to_pass +][+ IF optional +] \
"`echo '[+flag+]=$([+flag+])' | sed -e s'/[^=][^=]*=$$/XFOO=/'`"[+ ELSE optional +] \
"[+flag+]=$([+flag+])"[+ ENDIF optional+][+ ENDFOR flags_to_pass +] \
"CONFIG_SHELL=$(SHELL)" \
"MAKEINFO=$(MAKEINFO) $(MAKEINFOFLAGS)"
# We leave this in just in case, but it is not needed anymore.
RECURSE_FLAGS_TO_PASS = $(BASE_FLAGS_TO_PASS)
# Flags to pass down to most sub-makes, in which we're building with
# the host environment.
EXTRA_HOST_FLAGS = \
'AR=$(AR)' \
'AS=$(AS)' \
'CC=$(CC)' \
'CXX=$(CXX)' \
'DLLTOOL=$(DLLTOOL)' \
'LD=$(LD)' \
toplevel: 2005-12-05 Paolo Bonzini <bonzini@gnu.org> Sync with gcc: 2005-12-05 Paolo Bonzini <bonzini@gnu.org> * configure.in (CONFIGURED_BISON, CONFIGURED_YACC, CONFIGURED_M4, CONFIGURED_FLEX, CONFIGURED_LEX, CONFIGURED_MAKEINFO): Remove "CONFIGURED_" from the AC_CHECK_PROGS invocation. Move below. Find in-tree tools if available. (EXPECT, RUNTEST, LIPO, STRIP): Find them and substitute them. (CONFIGURED_*_FOR_TARGET): Don't set nor substitute. (*_FOR_TARGET): Set them with GCC_TARGET_TOOL. (COMPILER_*_FOR_TARGET): New. * Makefile.tpl (HOST_EXPORTS): Add *_FOR_TARGET symbols that gcc needs. (BASE_TARGET_EXPORTS): Use COMPILER_*_FOR_TARGET symbols. (CONFIGURED_*, USUAL_*): Remove. (BISON, YACC, FLEX, LEX, M4, MAKEINFO, EXPECT, RUNTEST, LIPO, STRIP): Use autoconf substitutions. (COMPILER_AS_FOR_TARGET, COMPILER_LD_FOR_TARGET, COMPILER_NM_FOR_TARGET): New. (EXTRA_HOST_FLAGS): Pass LIPO and STRIP. (all): Make all-host and all-target in parallel. (do-[+make_target+], do-check, install, [+compare-target+]): Ensure that $$r and $$s are set before invoking a recursive make. (stage[+id+]-bubble): Likewise, and invoke the comparison at the end. ([+bootstrap-target+]): Inline most of the `all' target. 2005-11-29 Ben Elliston <bje@au.ibm.com> * Makefile.tpl (clean-target-libgcc): Invoke clean-target-libgcc from the gcc build directory. * Makefile.in: Regenerate. 2005-11-29 Ben Elliston <bje@au.ibm.com> * Makefile.def: Add new libdecnumber host_module. Make all-gcc depend on all-libdecnumber. * configure.in (host_libs): Include libdecnumber. * Makefile.in: Regenerate. * configure: Likewise. 2005-11-21 Kean Johnston <jkj@sco.com> * config.sub, config.guess: Sync from upstream sources. config: 2005-12-05 Paolo Bonzini <bonzini@gnu.org> * acx.m4 (GCC_TARGET_TOOL): New.
2005-12-05 16:16:05 +01:00
'LIPO=$(LIPO)' \
'NM=$(NM)' \
'OBJDUMP=$(OBJDUMP)' \
'RANLIB=$(RANLIB)' \
toplevel: 2005-12-05 Paolo Bonzini <bonzini@gnu.org> Sync with gcc: 2005-12-05 Paolo Bonzini <bonzini@gnu.org> * configure.in (CONFIGURED_BISON, CONFIGURED_YACC, CONFIGURED_M4, CONFIGURED_FLEX, CONFIGURED_LEX, CONFIGURED_MAKEINFO): Remove "CONFIGURED_" from the AC_CHECK_PROGS invocation. Move below. Find in-tree tools if available. (EXPECT, RUNTEST, LIPO, STRIP): Find them and substitute them. (CONFIGURED_*_FOR_TARGET): Don't set nor substitute. (*_FOR_TARGET): Set them with GCC_TARGET_TOOL. (COMPILER_*_FOR_TARGET): New. * Makefile.tpl (HOST_EXPORTS): Add *_FOR_TARGET symbols that gcc needs. (BASE_TARGET_EXPORTS): Use COMPILER_*_FOR_TARGET symbols. (CONFIGURED_*, USUAL_*): Remove. (BISON, YACC, FLEX, LEX, M4, MAKEINFO, EXPECT, RUNTEST, LIPO, STRIP): Use autoconf substitutions. (COMPILER_AS_FOR_TARGET, COMPILER_LD_FOR_TARGET, COMPILER_NM_FOR_TARGET): New. (EXTRA_HOST_FLAGS): Pass LIPO and STRIP. (all): Make all-host and all-target in parallel. (do-[+make_target+], do-check, install, [+compare-target+]): Ensure that $$r and $$s are set before invoking a recursive make. (stage[+id+]-bubble): Likewise, and invoke the comparison at the end. ([+bootstrap-target+]): Inline most of the `all' target. 2005-11-29 Ben Elliston <bje@au.ibm.com> * Makefile.tpl (clean-target-libgcc): Invoke clean-target-libgcc from the gcc build directory. * Makefile.in: Regenerate. 2005-11-29 Ben Elliston <bje@au.ibm.com> * Makefile.def: Add new libdecnumber host_module. Make all-gcc depend on all-libdecnumber. * configure.in (host_libs): Include libdecnumber. * Makefile.in: Regenerate. * configure: Likewise. 2005-11-21 Kean Johnston <jkj@sco.com> * config.sub, config.guess: Sync from upstream sources. config: 2005-12-05 Paolo Bonzini <bonzini@gnu.org> * acx.m4 (GCC_TARGET_TOOL): New.
2005-12-05 16:16:05 +01:00
'STRIP=$(STRIP)' \
'WINDRES=$(WINDRES)'
FLAGS_TO_PASS = $(BASE_FLAGS_TO_PASS) $(EXTRA_HOST_FLAGS)
# Flags that are concerned with the location of the X11 include files
# and library files
#
# NOTE: until the top-level is getting the values via autoconf, it only
# causes problems to have this top-level Makefile overriding the autoconf-set
# values in child directories. Only variables that don't conflict with
# autoconf'ed ones should be passed by X11_FLAGS_TO_PASS for now.
#
X11_FLAGS_TO_PASS = \
'X11_EXTRA_CFLAGS=$(X11_EXTRA_CFLAGS)' \
'X11_EXTRA_LIBS=$(X11_EXTRA_LIBS)'
# Flags to pass down to makes which are built with the target environment.
# The double $ decreases the length of the command line; those variables
# are set in BASE_FLAGS_TO_PASS, and the sub-make will expand them. The
# COMPILER_ prefixed variables are not passed down so we expand them here.
EXTRA_TARGET_FLAGS = \
'AR=$$(AR_FOR_TARGET)' \
'AS=$(COMPILER_AS_FOR_TARGET)' \
'CC=$$(CC_FOR_TARGET)' \
'CFLAGS=$$(CFLAGS_FOR_TARGET)' \
'CXX=$$(CXX_FOR_TARGET)' \
'CXXFLAGS=$$(CXXFLAGS_FOR_TARGET)' \
'DLLTOOL=$$(DLLTOOL_FOR_TARGET)' \
'LD=$(COMPILER_LD_FOR_TARGET)' \
'LDFLAGS=$$(LDFLAGS_FOR_TARGET)' \
'LIBCFLAGS=$$(LIBCFLAGS_FOR_TARGET)' \
'LIBCXXFLAGS=$$(LIBCXXFLAGS_FOR_TARGET)' \
'NM=$(COMPILER_NM_FOR_TARGET)' \
'OBJDUMP=$$(OBJDUMP_FOR_TARGET)' \
'RANLIB=$$(RANLIB_FOR_TARGET)' \
'WINDRES=$$(WINDRES_FOR_TARGET)'
TARGET_FLAGS_TO_PASS = $(BASE_FLAGS_TO_PASS) $(EXTRA_TARGET_FLAGS)
# Flags to pass down to gcc. gcc builds a library, libgcc.a, so it
# unfortunately needs the native compiler and the target ar and
# ranlib.
# If any variables are added here, they must be added to do-*, below.
# The BUILD_* variables are a special case, which are used for the gcc
# cross-building scheme.
EXTRA_GCC_FLAGS = \
"GCC_FOR_TARGET=$(GCC_FOR_TARGET)" \
"`echo 'STMP_FIXPROTO=$(STMP_FIXPROTO)' | sed -e s'/[^=][^=]*=$$/XFOO=/'`" \
"`echo 'LIMITS_H_TEST=$(LIMITS_H_TEST)' | sed -e s'/[^=][^=]*=$$/XFOO=/'`" \
"`echo 'LIBGCC2_CFLAGS=$(LIBGCC2_CFLAGS)' | sed -e s'/[^=][^=]*=$$/XFOO=/'`" \
"`echo 'LIBGCC2_DEBUG_CFLAGS=$(LIBGCC2_DEBUG_CFLAGS)' | sed -e s'/[^=][^=]*=$$/XFOO=/'`" \
"`echo 'LIBGCC2_INCLUDES=$(LIBGCC2_INCLUDES)' | sed -e s'/[^=][^=]*=$$/XFOO=/'`"
GCC_FLAGS_TO_PASS = $(BASE_FLAGS_TO_PASS) $(EXTRA_HOST_FLAGS) $(EXTRA_GCC_FLAGS)
.PHONY: configure-host
configure-host: [+
FOR host_modules +] \
maybe-configure-[+module+][+
ENDFOR host_modules +]
.PHONY: configure-target
configure-target: [+
FOR target_modules +] \
maybe-configure-target-[+module+][+
ENDFOR target_modules +]
# The target built for a native non-bootstrap build.
.PHONY: all
all:
@if gcc-bootstrap
toplevel: 2005-12-05 Paolo Bonzini <bonzini@gnu.org> Sync with gcc: 2005-12-05 Paolo Bonzini <bonzini@gnu.org> * configure.in (CONFIGURED_BISON, CONFIGURED_YACC, CONFIGURED_M4, CONFIGURED_FLEX, CONFIGURED_LEX, CONFIGURED_MAKEINFO): Remove "CONFIGURED_" from the AC_CHECK_PROGS invocation. Move below. Find in-tree tools if available. (EXPECT, RUNTEST, LIPO, STRIP): Find them and substitute them. (CONFIGURED_*_FOR_TARGET): Don't set nor substitute. (*_FOR_TARGET): Set them with GCC_TARGET_TOOL. (COMPILER_*_FOR_TARGET): New. * Makefile.tpl (HOST_EXPORTS): Add *_FOR_TARGET symbols that gcc needs. (BASE_TARGET_EXPORTS): Use COMPILER_*_FOR_TARGET symbols. (CONFIGURED_*, USUAL_*): Remove. (BISON, YACC, FLEX, LEX, M4, MAKEINFO, EXPECT, RUNTEST, LIPO, STRIP): Use autoconf substitutions. (COMPILER_AS_FOR_TARGET, COMPILER_LD_FOR_TARGET, COMPILER_NM_FOR_TARGET): New. (EXTRA_HOST_FLAGS): Pass LIPO and STRIP. (all): Make all-host and all-target in parallel. (do-[+make_target+], do-check, install, [+compare-target+]): Ensure that $$r and $$s are set before invoking a recursive make. (stage[+id+]-bubble): Likewise, and invoke the comparison at the end. ([+bootstrap-target+]): Inline most of the `all' target. 2005-11-29 Ben Elliston <bje@au.ibm.com> * Makefile.tpl (clean-target-libgcc): Invoke clean-target-libgcc from the gcc build directory. * Makefile.in: Regenerate. 2005-11-29 Ben Elliston <bje@au.ibm.com> * Makefile.def: Add new libdecnumber host_module. Make all-gcc depend on all-libdecnumber. * configure.in (host_libs): Include libdecnumber. * Makefile.in: Regenerate. * configure: Likewise. 2005-11-21 Kean Johnston <jkj@sco.com> * config.sub, config.guess: Sync from upstream sources. config: 2005-12-05 Paolo Bonzini <bonzini@gnu.org> * acx.m4 (GCC_TARGET_TOOL): New.
2005-12-05 16:16:05 +01:00
[ -f stage_final ] || echo stage3 > stage_final
@r=`${PWD_COMMAND}`; export r; \
s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \
$(MAKE) $(RECURSE_FLAGS_TO_PASS) `cat stage_final`-bubble
@endif gcc-bootstrap
@: $(MAKE); $(unstage)
@r=`${PWD_COMMAND}`; export r; \
s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \
if [ -f stage_last ]; then \
toplevel: 2005-12-05 Paolo Bonzini <bonzini@gnu.org> Sync with gcc: 2005-12-05 Paolo Bonzini <bonzini@gnu.org> * configure.in (CONFIGURED_BISON, CONFIGURED_YACC, CONFIGURED_M4, CONFIGURED_FLEX, CONFIGURED_LEX, CONFIGURED_MAKEINFO): Remove "CONFIGURED_" from the AC_CHECK_PROGS invocation. Move below. Find in-tree tools if available. (EXPECT, RUNTEST, LIPO, STRIP): Find them and substitute them. (CONFIGURED_*_FOR_TARGET): Don't set nor substitute. (*_FOR_TARGET): Set them with GCC_TARGET_TOOL. (COMPILER_*_FOR_TARGET): New. * Makefile.tpl (HOST_EXPORTS): Add *_FOR_TARGET symbols that gcc needs. (BASE_TARGET_EXPORTS): Use COMPILER_*_FOR_TARGET symbols. (CONFIGURED_*, USUAL_*): Remove. (BISON, YACC, FLEX, LEX, M4, MAKEINFO, EXPECT, RUNTEST, LIPO, STRIP): Use autoconf substitutions. (COMPILER_AS_FOR_TARGET, COMPILER_LD_FOR_TARGET, COMPILER_NM_FOR_TARGET): New. (EXTRA_HOST_FLAGS): Pass LIPO and STRIP. (all): Make all-host and all-target in parallel. (do-[+make_target+], do-check, install, [+compare-target+]): Ensure that $$r and $$s are set before invoking a recursive make. (stage[+id+]-bubble): Likewise, and invoke the comparison at the end. ([+bootstrap-target+]): Inline most of the `all' target. 2005-11-29 Ben Elliston <bje@au.ibm.com> * Makefile.tpl (clean-target-libgcc): Invoke clean-target-libgcc from the gcc build directory. * Makefile.in: Regenerate. 2005-11-29 Ben Elliston <bje@au.ibm.com> * Makefile.def: Add new libdecnumber host_module. Make all-gcc depend on all-libdecnumber. * configure.in (host_libs): Include libdecnumber. * Makefile.in: Regenerate. * configure: Likewise. 2005-11-21 Kean Johnston <jkj@sco.com> * config.sub, config.guess: Sync from upstream sources. config: 2005-12-05 Paolo Bonzini <bonzini@gnu.org> * acx.m4 (GCC_TARGET_TOOL): New.
2005-12-05 16:16:05 +01:00
$(MAKE) $(TARGET_FLAGS_TO_PASS) all-host all-target; \
else \
toplevel: 2005-12-05 Paolo Bonzini <bonzini@gnu.org> Sync with gcc: 2005-12-05 Paolo Bonzini <bonzini@gnu.org> * configure.in (CONFIGURED_BISON, CONFIGURED_YACC, CONFIGURED_M4, CONFIGURED_FLEX, CONFIGURED_LEX, CONFIGURED_MAKEINFO): Remove "CONFIGURED_" from the AC_CHECK_PROGS invocation. Move below. Find in-tree tools if available. (EXPECT, RUNTEST, LIPO, STRIP): Find them and substitute them. (CONFIGURED_*_FOR_TARGET): Don't set nor substitute. (*_FOR_TARGET): Set them with GCC_TARGET_TOOL. (COMPILER_*_FOR_TARGET): New. * Makefile.tpl (HOST_EXPORTS): Add *_FOR_TARGET symbols that gcc needs. (BASE_TARGET_EXPORTS): Use COMPILER_*_FOR_TARGET symbols. (CONFIGURED_*, USUAL_*): Remove. (BISON, YACC, FLEX, LEX, M4, MAKEINFO, EXPECT, RUNTEST, LIPO, STRIP): Use autoconf substitutions. (COMPILER_AS_FOR_TARGET, COMPILER_LD_FOR_TARGET, COMPILER_NM_FOR_TARGET): New. (EXTRA_HOST_FLAGS): Pass LIPO and STRIP. (all): Make all-host and all-target in parallel. (do-[+make_target+], do-check, install, [+compare-target+]): Ensure that $$r and $$s are set before invoking a recursive make. (stage[+id+]-bubble): Likewise, and invoke the comparison at the end. ([+bootstrap-target+]): Inline most of the `all' target. 2005-11-29 Ben Elliston <bje@au.ibm.com> * Makefile.tpl (clean-target-libgcc): Invoke clean-target-libgcc from the gcc build directory. * Makefile.in: Regenerate. 2005-11-29 Ben Elliston <bje@au.ibm.com> * Makefile.def: Add new libdecnumber host_module. Make all-gcc depend on all-libdecnumber. * configure.in (host_libs): Include libdecnumber. * Makefile.in: Regenerate. * configure: Likewise. 2005-11-21 Kean Johnston <jkj@sco.com> * config.sub, config.guess: Sync from upstream sources. config: 2005-12-05 Paolo Bonzini <bonzini@gnu.org> * acx.m4 (GCC_TARGET_TOOL): New.
2005-12-05 16:16:05 +01:00
$(MAKE) $(RECURSE_FLAGS_TO_PASS) all-host all-target; \
fi
.PHONY: all-build
[+ FOR build_modules +]
all-build: maybe-all-build-[+module+][+ ENDFOR build_modules +]
.PHONY: all-host
[+ FOR host_modules +][+ IF bootstrap +]
@if [+module+]-no-bootstrap[+ ENDIF bootstrap +]
all-host: maybe-all-[+module+][+ IF bootstrap +]
@endif [+module+]-no-bootstrap[+ ENDIF bootstrap +][+ ENDFOR host_modules +]
.PHONY: all-target
[+ FOR target_modules +][+ IF bootstrap +]
@if [+module+]-no-bootstrap[+ ENDIF bootstrap +]
all-target: maybe-all-target-[+module+][+ IF bootstrap +]
@endif [+module+]-no-bootstrap[+ ENDIF bootstrap +][+ ENDFOR target_modules +]
# Do a target for all the subdirectories. A ``make do-X'' will do a
# ``make X'' in all subdirectories (because, in general, there is a
# dependency (below) of X upon do-X, a ``make X'' will also do this,
# but it may do additional work as well).
[+ FOR recursive_targets +]
.PHONY: do-[+make_target+]
do-[+make_target+]:
@: $(MAKE); $(unstage)
@r=`${PWD_COMMAND}`; export r; \
s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \
$(MAKE) $(RECURSE_FLAGS_TO_PASS) [+make_target+]-host \
[+make_target+]-target
.PHONY: [+make_target+]-host
[+ FOR host_modules +]
[+make_target+]-host: maybe-[+make_target+]-[+module+][+ ENDFOR host_modules +]
.PHONY: [+make_target+]-target
[+ FOR target_modules +]
[+make_target+]-target: maybe-[+make_target+]-target-[+module+][+ ENDFOR target_modules +]
[+ ENDFOR recursive_targets +]
# Here are the targets which correspond to the do-X targets.
2006-04-06 Carlos O'Donell <carlos@codesourcery.com> * Makefile.tpl: Add install-html target. * Makefile.def: Add install-html target. * Makefile.in: Regenerate. * configure.in: Add --with-datarootdir, --with-docdir, and --with-htmldir options. * configure: Regenerate. bfd/ 2006-04-06 Carlos O'Donell <carlos@codesourcery.com> * po/Make-in: Add install-html target. * Makefile.am: Rename docdir to bfddocdir. Add datarootdir, docdir htmldir. Add install-html and install-html-recursive targets. * Makefile.in: Regenerate. * configure.in: AC_SUBST for datarootdir, docdir and htmldir. * configure: Regenerate. bfd/doc/ 2006-04-06 Carlos O'Donell <carlos@codesourcery.com> * Makefile.am: Add install-html and install-html-am targets. Define datarootdir, docdir and htmldir. * Makefile.in: Regenerate. binutils/ 2006-04-06 Carlos O'Donell <carlos@codesourcery.com> * po/Make-in: Add install-html target. * Makefile.am: Add install-html and install-html-recursive targets. * Makefile.in: Regenerate. * configure.in: AC_SUBST datarootdir, docdir and htmldir. * configure: Regenerate. * doc/Makefile.am: Add install-html and install-html-am targets. * doc/Makefile.in: Regenerate. etc/ 2006-04-06 Carlos O'Donell <carlos@codesourcery.com> * Makefile.in: Add install-html target. Add htmldir, docdir and datarootdir. * configure.texi: Document install-html target. * configure.in: AC_SUBST datarootdir, docdir, htmldir. * configure: Regenerate. gas/ 2006-04-06 Carlos O'Donell <carlos@codesourcery.com> * po/Make-in: Add install-html target. * Makefile.am: Add install-html and install-html-recursive targets. * Makefile.in: Regenerate. * configure.in: AC_SUBST datarootdir, docdir, htmldir. * configure: Regenerate. * doc/Makefile.am: Add install-html and install-html-am targets. * doc/Makefile.in: Regenerate. gprof/ 2006-04-06 Carlos O'Donell <carlos@codesourcery.com> * po/Make-in: Add install-html target. * Makefile.am: Add install-html, install-html-am and install-html-recursive targets. * Makefile.in: Regenerate. * configure.in: AC_SUBST datarootdir, docdir, htmldir. * configure: Regenerate. intl/ 2006-04-06 Carlos O'Donell <carlos@codesourcery.com> * intl/Makefile.in: Add html info and dvi and install-html to .PHONY Add install-html target. ld/ 2006-04-06 Carlos O'Donell <carlos@codesourcery.com> * Makefile.am: Add install-html, install-html-am, and install-html-recursive targets. * Makefile.in: Regenerate. * configure.in: AC_SUBST datarootdir, docdir, htmldir. * configure: Regenerate. * po/Make-in: Add install-html target. opcodes/ 2006-04-06 Carlos O'Donell <carlos@codesourcery.com> * Makefile.am: Add install-html target. * Makefile.in: Regenerate.
2006-04-06 23:49:30 +02:00
.PHONY: info installcheck dvi html install-info install-html
.PHONY: clean distclean mostlyclean maintainer-clean realclean
.PHONY: local-clean local-distclean local-maintainer-clean
info: do-info
installcheck: do-installcheck
dvi: do-dvi
html: do-html
# Make sure makeinfo is built before we do a `make info', if we're
# in fact building texinfo.
do-info: maybe-all-texinfo
install-info: do-install-info dir.info
s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \
if [ -f dir.info ] ; then \
$(INSTALL_DATA) dir.info $(DESTDIR)$(infodir)/dir.info ; \
else true ; fi
2006-04-06 Carlos O'Donell <carlos@codesourcery.com> * Makefile.tpl: Add install-html target. * Makefile.def: Add install-html target. * Makefile.in: Regenerate. * configure.in: Add --with-datarootdir, --with-docdir, and --with-htmldir options. * configure: Regenerate. bfd/ 2006-04-06 Carlos O'Donell <carlos@codesourcery.com> * po/Make-in: Add install-html target. * Makefile.am: Rename docdir to bfddocdir. Add datarootdir, docdir htmldir. Add install-html and install-html-recursive targets. * Makefile.in: Regenerate. * configure.in: AC_SUBST for datarootdir, docdir and htmldir. * configure: Regenerate. bfd/doc/ 2006-04-06 Carlos O'Donell <carlos@codesourcery.com> * Makefile.am: Add install-html and install-html-am targets. Define datarootdir, docdir and htmldir. * Makefile.in: Regenerate. binutils/ 2006-04-06 Carlos O'Donell <carlos@codesourcery.com> * po/Make-in: Add install-html target. * Makefile.am: Add install-html and install-html-recursive targets. * Makefile.in: Regenerate. * configure.in: AC_SUBST datarootdir, docdir and htmldir. * configure: Regenerate. * doc/Makefile.am: Add install-html and install-html-am targets. * doc/Makefile.in: Regenerate. etc/ 2006-04-06 Carlos O'Donell <carlos@codesourcery.com> * Makefile.in: Add install-html target. Add htmldir, docdir and datarootdir. * configure.texi: Document install-html target. * configure.in: AC_SUBST datarootdir, docdir, htmldir. * configure: Regenerate. gas/ 2006-04-06 Carlos O'Donell <carlos@codesourcery.com> * po/Make-in: Add install-html target. * Makefile.am: Add install-html and install-html-recursive targets. * Makefile.in: Regenerate. * configure.in: AC_SUBST datarootdir, docdir, htmldir. * configure: Regenerate. * doc/Makefile.am: Add install-html and install-html-am targets. * doc/Makefile.in: Regenerate. gprof/ 2006-04-06 Carlos O'Donell <carlos@codesourcery.com> * po/Make-in: Add install-html target. * Makefile.am: Add install-html, install-html-am and install-html-recursive targets. * Makefile.in: Regenerate. * configure.in: AC_SUBST datarootdir, docdir, htmldir. * configure: Regenerate. intl/ 2006-04-06 Carlos O'Donell <carlos@codesourcery.com> * intl/Makefile.in: Add html info and dvi and install-html to .PHONY Add install-html target. ld/ 2006-04-06 Carlos O'Donell <carlos@codesourcery.com> * Makefile.am: Add install-html, install-html-am, and install-html-recursive targets. * Makefile.in: Regenerate. * configure.in: AC_SUBST datarootdir, docdir, htmldir. * configure: Regenerate. * po/Make-in: Add install-html target. opcodes/ 2006-04-06 Carlos O'Donell <carlos@codesourcery.com> * Makefile.am: Add install-html target. * Makefile.in: Regenerate.
2006-04-06 23:49:30 +02:00
install-html: do-install-html
local-clean:
-rm -f *.a TEMP errs core *.o *~ \#* TAGS *.E *.log
local-distclean:
-rm -f Makefile config.status config.cache mh-frag mt-frag
-rm -f maybedep.tmp serdep.tmp
-if [ "$(TARGET_SUBDIR)" != "." ]; then \
rm -rf $(TARGET_SUBDIR); \
else true; fi
-rm -rf $(BUILD_SUBDIR)
-if [ "$(HOST_SUBDIR)" != "." ]; then \
rm -rf $(HOST_SUBDIR); \
else true; fi
-rm -f texinfo/po/Makefile texinfo/po/Makefile.in texinfo/info/Makefile
-rm -f texinfo/doc/Makefile texinfo/po/POTFILES
-rmdir texinfo/doc texinfo/info texinfo/intl texinfo/lib 2>/dev/null
-rmdir texinfo/makeinfo texinfo/po texinfo/util 2>/dev/null
-rmdir fastjar gcc libiberty texinfo zlib 2>/dev/null
local-maintainer-clean:
@echo "This command is intended for maintainers to use;"
@echo "it deletes files that may require special tools to rebuild."
clean: do-clean local-clean
mostlyclean: do-mostlyclean local-clean
distclean: do-distclean local-clean local-distclean
maintainer-clean: local-maintainer-clean do-maintainer-clean local-clean
maintainer-clean: local-distclean
realclean: maintainer-clean
toplevel: 2005-12-05 Paolo Bonzini <bonzini@gnu.org> Sync with gcc: 2005-12-05 Paolo Bonzini <bonzini@gnu.org> * configure.in (CONFIGURED_BISON, CONFIGURED_YACC, CONFIGURED_M4, CONFIGURED_FLEX, CONFIGURED_LEX, CONFIGURED_MAKEINFO): Remove "CONFIGURED_" from the AC_CHECK_PROGS invocation. Move below. Find in-tree tools if available. (EXPECT, RUNTEST, LIPO, STRIP): Find them and substitute them. (CONFIGURED_*_FOR_TARGET): Don't set nor substitute. (*_FOR_TARGET): Set them with GCC_TARGET_TOOL. (COMPILER_*_FOR_TARGET): New. * Makefile.tpl (HOST_EXPORTS): Add *_FOR_TARGET symbols that gcc needs. (BASE_TARGET_EXPORTS): Use COMPILER_*_FOR_TARGET symbols. (CONFIGURED_*, USUAL_*): Remove. (BISON, YACC, FLEX, LEX, M4, MAKEINFO, EXPECT, RUNTEST, LIPO, STRIP): Use autoconf substitutions. (COMPILER_AS_FOR_TARGET, COMPILER_LD_FOR_TARGET, COMPILER_NM_FOR_TARGET): New. (EXTRA_HOST_FLAGS): Pass LIPO and STRIP. (all): Make all-host and all-target in parallel. (do-[+make_target+], do-check, install, [+compare-target+]): Ensure that $$r and $$s are set before invoking a recursive make. (stage[+id+]-bubble): Likewise, and invoke the comparison at the end. ([+bootstrap-target+]): Inline most of the `all' target. 2005-11-29 Ben Elliston <bje@au.ibm.com> * Makefile.tpl (clean-target-libgcc): Invoke clean-target-libgcc from the gcc build directory. * Makefile.in: Regenerate. 2005-11-29 Ben Elliston <bje@au.ibm.com> * Makefile.def: Add new libdecnumber host_module. Make all-gcc depend on all-libdecnumber. * configure.in (host_libs): Include libdecnumber. * Makefile.in: Regenerate. * configure: Likewise. 2005-11-21 Kean Johnston <jkj@sco.com> * config.sub, config.guess: Sync from upstream sources. config: 2005-12-05 Paolo Bonzini <bonzini@gnu.org> * acx.m4 (GCC_TARGET_TOOL): New.
2005-12-05 16:16:05 +01:00
# Extra dependency for clean-target, owing to the mixed nature of gcc.
clean-target: clean-target-libgcc
clean-target-libgcc:
toplevel: 2005-12-05 Paolo Bonzini <bonzini@gnu.org> Sync with gcc: 2005-12-05 Paolo Bonzini <bonzini@gnu.org> * configure.in (CONFIGURED_BISON, CONFIGURED_YACC, CONFIGURED_M4, CONFIGURED_FLEX, CONFIGURED_LEX, CONFIGURED_MAKEINFO): Remove "CONFIGURED_" from the AC_CHECK_PROGS invocation. Move below. Find in-tree tools if available. (EXPECT, RUNTEST, LIPO, STRIP): Find them and substitute them. (CONFIGURED_*_FOR_TARGET): Don't set nor substitute. (*_FOR_TARGET): Set them with GCC_TARGET_TOOL. (COMPILER_*_FOR_TARGET): New. * Makefile.tpl (HOST_EXPORTS): Add *_FOR_TARGET symbols that gcc needs. (BASE_TARGET_EXPORTS): Use COMPILER_*_FOR_TARGET symbols. (CONFIGURED_*, USUAL_*): Remove. (BISON, YACC, FLEX, LEX, M4, MAKEINFO, EXPECT, RUNTEST, LIPO, STRIP): Use autoconf substitutions. (COMPILER_AS_FOR_TARGET, COMPILER_LD_FOR_TARGET, COMPILER_NM_FOR_TARGET): New. (EXTRA_HOST_FLAGS): Pass LIPO and STRIP. (all): Make all-host and all-target in parallel. (do-[+make_target+], do-check, install, [+compare-target+]): Ensure that $$r and $$s are set before invoking a recursive make. (stage[+id+]-bubble): Likewise, and invoke the comparison at the end. ([+bootstrap-target+]): Inline most of the `all' target. 2005-11-29 Ben Elliston <bje@au.ibm.com> * Makefile.tpl (clean-target-libgcc): Invoke clean-target-libgcc from the gcc build directory. * Makefile.in: Regenerate. 2005-11-29 Ben Elliston <bje@au.ibm.com> * Makefile.def: Add new libdecnumber host_module. Make all-gcc depend on all-libdecnumber. * configure.in (host_libs): Include libdecnumber. * Makefile.in: Regenerate. * configure: Likewise. 2005-11-21 Kean Johnston <jkj@sco.com> * config.sub, config.guess: Sync from upstream sources. config: 2005-12-05 Paolo Bonzini <bonzini@gnu.org> * acx.m4 (GCC_TARGET_TOOL): New.
2005-12-05 16:16:05 +01:00
test ! -d gcc || (cd gcc && $(MAKE) $@)
# Check target.
.PHONY: check do-check
check: do-check
# Only include modules actually being configured and built.
.PHONY: check-host
check-host: [+
FOR host_modules +] \
maybe-check-[+module+][+
ENDFOR host_modules +]
.PHONY: check-target
check-target: [+
FOR target_modules +] \
maybe-check-target-[+module+][+
ENDFOR target_modules +]
do-check:
@: $(MAKE); $(unstage)
@r=`${PWD_COMMAND}`; export r; \
s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \
$(MAKE) $(RECURSE_FLAGS_TO_PASS) check-host check-target
# Automated reporting of test results.
warning.log: build.log
$(srcdir)/contrib/warn_summary build.log > $@
mail-report.log:
if test x'$(BOOT_CFLAGS)' != x''; then \
BOOT_CFLAGS='$(BOOT_CFLAGS)'; export BOOT_CFLAGS; \
fi; \
$(srcdir)/contrib/test_summary -t >$@
chmod +x $@
echo If you really want to send e-mail, run ./$@ now
mail-report-with-warnings.log: warning.log
if test x'$(BOOT_CFLAGS)' != x''; then \
BOOT_CFLAGS='$(BOOT_CFLAGS)'; export BOOT_CFLAGS; \
fi; \
$(srcdir)/contrib/test_summary -t -i warning.log >$@
chmod +x $@
echo If you really want to send e-mail, run ./$@ now
# Installation targets.
.PHONY: install uninstall
install:
@: $(MAKE); $(unstage)
@r=`${PWD_COMMAND}`; export r; \
s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \
$(MAKE) $(RECURSE_FLAGS_TO_PASS) installdirs install-host install-target
.PHONY: install-host-nogcc
install-host-nogcc: [+
FOR host_modules +][+ IF (not (= (get "module") "gcc")) +] \
maybe-install-[+module+][+ ENDIF +][+
ENDFOR host_modules +]
.PHONY: install-host
install-host: [+
FOR host_modules +] \
maybe-install-[+module+][+
ENDFOR host_modules +]
.PHONY: install-target
install-target: [+
FOR target_modules +] \
maybe-install-target-[+module+][+
ENDFOR target_modules +]
uninstall:
@echo "the uninstall target is not supported in this tree"
.PHONY: install.all
install.all: install-no-fixedincludes
@if [ -f ./gcc/Makefile ] ; then \
r=`${PWD_COMMAND}` ; export r ; \
s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \
$(HOST_EXPORTS) \
(cd ./gcc && \
$(MAKE) $(FLAGS_TO_PASS) install-headers) ; \
else \
true ; \
fi
# install-no-fixedincludes is used because Cygnus can not distribute
# the fixed header files.
.PHONY: install-no-fixedincludes
install-no-fixedincludes: installdirs install-host-nogcc \
install-target gcc-no-fixedincludes
### other supporting targets
MAKEDIRS= \
$(DESTDIR)$(prefix) \
$(DESTDIR)$(exec_prefix)
.PHONY: installdirs
installdirs: mkinstalldirs
$(SHELL) $(srcdir)/mkinstalldirs $(MAKEDIRS)
dir.info: do-install-info
if [ -f $(srcdir)/texinfo/gen-info-dir ] ; then \
$(srcdir)/texinfo/gen-info-dir $(DESTDIR)$(infodir) $(srcdir)/texinfo/dir.info-template > dir.info.new ; \
mv -f dir.info.new dir.info ; \
else true ; \
fi
dist:
@echo "Building a full distribution of this tree isn't done"
@echo "via 'make dist'. Check out the etc/ subdirectory"
etags tags: TAGS
# Right now this just builds TAGS in each subdirectory. emacs19 has the
# ability to use several tags files at once, so there is probably no need
# to combine them into one big TAGS file (like CVS 1.3 does). We could
# (if we felt like it) have this Makefile write a piece of elisp which
# the user could load to tell emacs19 where all the TAGS files we just
# built are.
TAGS: do-TAGS
# ------------------------------------
# Macros for configure and all targets
# ------------------------------------
[+ DEFINE configure +]
.PHONY: configure-[+prefix+][+module+] maybe-configure-[+prefix+][+module+]
maybe-configure-[+prefix+][+module+]:
@if [+prefix+][+module+]
maybe-configure-[+prefix+][+module+]: configure-[+prefix+][+module+]
configure-[+prefix+][+module+]: [+ IF bootstrap +]
@endif [+prefix+][+module+]
@if [+prefix+][+module+]-bootstrap
@if test -f stage_last; then $(unstage); else $(MAKE) stage1-start; fi
@endif [+prefix+][+module+]-bootstrap
@if [+prefix+][+module+][+ ELSE bootstrap +]
@: $(MAKE); $(unstage)[+ ENDIF bootstrap +]
@r=`${PWD_COMMAND}`; export r; \
s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \
[+ IF check_multilibs
+]echo "Checking multilib configuration for [+module+]..."; \
$(SHELL) $(srcdir)/mkinstalldirs [+subdir+]/[+module+] ; \
$(CC_FOR_TARGET) --print-multi-lib > [+subdir+]/[+module+]/multilib.tmp 2> /dev/null ; \
if test -r [+subdir+]/[+module+]/multilib.out; then \
if cmp -s [+subdir+]/[+module+]/multilib.tmp [+subdir+]/[+module+]/multilib.out; then \
rm -f [+subdir+]/[+module+]/multilib.tmp; \
else \
rm -f [+subdir+]/[+module+]/Makefile; \
mv [+subdir+]/[+module+]/multilib.tmp [+subdir+]/[+module+]/multilib.out; \
fi; \
else \
mv [+subdir+]/[+module+]/multilib.tmp [+subdir+]/[+module+]/multilib.out; \
fi; \
[+ ENDIF check_multilibs +]test ! -f [+subdir+]/[+module+]/Makefile || exit 0; \
$(SHELL) $(srcdir)/mkinstalldirs [+subdir+]/[+module+] ; \
[+exports+] \
echo Configuring in [+subdir+]/[+module+]; \
cd "[+subdir+]/[+module+]" || exit 1; \
case $(srcdir) in \
/* | [A-Za-z]:[\\/]*) topdir=$(srcdir) ;; \
*) topdir=`echo [+subdir+]/[+module+]/ | \
sed -e 's,\./,,g' -e 's,[^/]*/,../,g' `$(srcdir) ;; \
esac; \
srcdiroption="--srcdir=$${topdir}/[+module+]"; \
libsrcdir="$$s/[+module+]"; \
[+ IF no-config-site +]rm -f no-such-file || : ; \
CONFIG_SITE=no-such-file [+ ENDIF +]$(SHELL) $${libsrcdir}/configure \
[+args+] $${srcdiroption} [+extra_configure_flags+] \
|| exit 1
@endif [+prefix+][+module+]
[+ IF bootstrap +]
[+ FOR bootstrap_stage +]
.PHONY: configure-stage[+id+]-[+prefix+][+module+] maybe-configure-stage[+id+]-[+prefix+][+module+]
maybe-configure-stage[+id+]-[+prefix+][+module+]:
@if [+prefix+][+module+]-bootstrap
maybe-configure-stage[+id+]-[+prefix+][+module+]: configure-stage[+id+]-[+prefix+][+module+]
configure-stage[+id+]-[+prefix+][+module+]:
@[ $(current_stage) = stage[+id+] ] || $(MAKE) stage[+id+]-start
@$(SHELL) $(srcdir)/mkinstalldirs [+subdir+]/[+module+]
@r=`${PWD_COMMAND}`; export r; \
s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \
[+ IF check_multilibs
+]echo "Checking multilib configuration for [+module+]..."; \
$(CC_FOR_TARGET) --print-multi-lib > [+subdir+]/[+module+]/multilib.tmp 2> /dev/null ; \
if test -r [+subdir+]/[+module+]/multilib.out; then \
if cmp -s [+subdir+]/[+module+]/multilib.tmp [+subdir+]/[+module+]/multilib.out; then \
rm -f [+subdir+]/[+module+]/multilib.tmp; \
else \
rm -f [+subdir+]/[+module+]/Makefile; \
mv [+subdir+]/[+module+]/multilib.tmp [+subdir+]/[+module+]/multilib.out; \
fi; \
else \
mv [+subdir+]/[+module+]/multilib.tmp [+subdir+]/[+module+]/multilib.out; \
fi; \
[+ ENDIF check_multilibs +]test ! -f [+subdir+]/[+module+]/Makefile || exit 0; \
[+exports+][+ IF prev +] \
[+poststage1_exports+][+ ENDIF prev +] \
echo Configuring stage [+id+] in [+subdir+]/[+module+] ; \
$(SHELL) $(srcdir)/mkinstalldirs [+subdir+]/[+module+] ; \
cd [+subdir+]/[+module+] || exit 1; \
case $(srcdir) in \
/* | [A-Za-z]:[\\/]*) topdir=$(srcdir) ;; \
*) topdir=`echo [+subdir+]/[+module+]/ | \
sed -e 's,\./,,g' -e 's,[^/]*/,../,g' `$(srcdir) ;; \
esac; \
srcdiroption="--srcdir=$${topdir}/[+module+]"; \
libsrcdir="$$s/[+module+]"; \
$(SHELL) $${libsrcdir}/configure \
[+args+] $${srcdiroption} \
[+stage_configure_flags+] [+extra_configure_flags+]
@endif [+prefix+][+module+]-bootstrap
[+ ENDFOR bootstrap_stage +]
[+ ENDIF bootstrap +]
[+ ENDDEF +]
[+ DEFINE all +]
.PHONY: all-[+prefix+][+module+] maybe-all-[+prefix+][+module+]
maybe-all-[+prefix+][+module+]:
@if [+prefix+][+module+]
TARGET-[+prefix+][+module+]=[+
IF target +][+target+][+ ELSE +]all[+ ENDIF target +]
maybe-all-[+prefix+][+module+]: all-[+prefix+][+module+]
all-[+prefix+][+module+]: configure-[+prefix+][+module+][+ IF bootstrap +]
@endif [+prefix+][+module+]
@if [+prefix+][+module+]-bootstrap
@if test -f stage_last; then $(unstage); else $(MAKE) stage1-start; fi
@endif [+prefix+][+module+]-bootstrap
@if [+prefix+][+module+][+ ELSE bootstrap +]
@: $(MAKE); $(unstage)[+ ENDIF bootstrap +]
@r=`${PWD_COMMAND}`; export r; \
s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \
[+exports+] \
(cd [+subdir+]/[+module+] && \
$(MAKE) [+args+] [+extra_make_flags+] $(TARGET-[+prefix+][+module+]))
@endif [+prefix+][+module+]
[+ IF bootstrap +]
[+ FOR bootstrap_stage +]
.PHONY: all-stage[+id+]-[+prefix+][+module+] maybe-all-stage[+id+]-[+prefix+][+module+]
.PHONY: clean-stage[+id+]-[+prefix+][+module+] maybe-clean-stage[+id+]-[+prefix+][+module+]
maybe-all-stage[+id+]-[+prefix+][+module+]:
maybe-clean-stage[+id+]-[+prefix+][+module+]:
@if [+prefix+][+module+]-bootstrap
maybe-all-stage[+id+]-[+prefix+][+module+]: all-stage[+id+]-[+prefix+][+module+]
all-stage[+id+]: all-stage[+id+]-[+prefix+][+module+]
TARGET-stage[+id+]-[+prefix+][+module+] = $(TARGET-[+prefix+][+module+])
all-stage[+id+]-[+prefix+][+module+]: configure-stage[+id+]-[+prefix+][+module+]
@[ $(current_stage) = stage[+id+] ] || $(MAKE) stage[+id+]-start
@r=`${PWD_COMMAND}`; export r; \
s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \
[+exports+][+ IF prev +] \
[+poststage1_exports+][+ ENDIF prev +] \
cd [+subdir+]/[+module+] && \
$(MAKE) [+args+] [+ IF prev
+][+poststage1_args+][+ ENDIF prev
+] [+stage_make_flags+] [+extra_make_flags+] \
$(TARGET-stage[+id+]-[+prefix+][+module+])
maybe-clean-stage[+id+]-[+prefix+][+module+]: clean-stage[+id+]-[+prefix+][+module+]
clean-stage[+id+]: clean-stage[+id+]-[+prefix+][+module+]
clean-stage[+id+]-[+prefix+][+module+]:
@[ -f [+subdir+]/[+module+]/Makefile ] || [ -f [+subdir+]/stage[+id+]-[+module+]/Makefile ] \
|| exit 0 ; \
[ $(current_stage) = stage[+id+] ] || $(MAKE) stage[+id+]-start; \
cd [+subdir+]/[+module+] && \
$(MAKE) [+args+] [+ IF prev +] \
[+poststage1_args+] [+ ENDIF prev +] \
[+stage_make_flags+] [+extra_make_flags+] clean
@endif [+prefix+][+module+]-bootstrap
[+ ENDFOR bootstrap_stage +]
[+ ENDIF bootstrap +]
[+ ENDDEF +]
# --------------------------------------
# Modules which run on the build machine
# --------------------------------------
[+ FOR build_modules +]
[+ configure prefix="build-" subdir="$(BUILD_SUBDIR)" exports="$(BUILD_EXPORTS)"
args="$(BUILD_CONFIGARGS)" no-config-site=true +]
[+ all prefix="build-" subdir="$(BUILD_SUBDIR)" exports="$(BUILD_EXPORTS)" +]
[+ ENDFOR build_module +]
# --------------------------------------
# Modules which run on the host machine
# --------------------------------------
[+ FOR host_modules +]
[+ configure prefix="" subdir="$(HOST_SUBDIR)"
exports="$(HOST_EXPORTS)"
poststage1_exports="$(POSTSTAGE1_HOST_EXPORTS)"
args="$(HOST_CONFIGARGS)" +]
[+ all prefix="" subdir="$(HOST_SUBDIR)"
exports="$(HOST_EXPORTS)"
poststage1_exports="$(POSTSTAGE1_HOST_EXPORTS)"
args="$(FLAGS_TO_PASS)"
poststage1_args="$(POSTSTAGE1_FLAGS_TO_PASS)" +]
.PHONY: check-[+module+] maybe-check-[+module+]
maybe-check-[+module+]:
@if [+module+]
maybe-check-[+module+]: check-[+module+]
[+ IF no_check +]
check-[+module+]:
[+ ELIF no_check_cross +]
# This module is only tested in a native toolchain.
check-[+module+]:
@: $(MAKE); $(unstage)
@if [ '$(host)' = '$(target)' ] ; then \
r=`${PWD_COMMAND}`; export r; \
s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \
$(HOST_EXPORTS) \
(cd $(HOST_SUBDIR)/[+module+] && \
$(MAKE) $(FLAGS_TO_PASS) [+extra_make_flags+] check); \
fi
[+ ELSE check +]
check-[+module+]:
@: $(MAKE); $(unstage)
@r=`${PWD_COMMAND}`; export r; \
s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \
$(HOST_EXPORTS) \
(cd $(HOST_SUBDIR)/[+module+] && \
$(MAKE) $(FLAGS_TO_PASS) [+extra_make_flags+] check)
[+ ENDIF no_check +]
@endif [+module+]
.PHONY: install-[+module+] maybe-install-[+module+]
maybe-install-[+module+]:
@if [+module+]
maybe-install-[+module+]: install-[+module+]
[+ IF no_install +]
install-[+module+]:
[+ ELSE install +]
install-[+module+]: installdirs
@: $(MAKE); $(unstage)
@r=`${PWD_COMMAND}`; export r; \
s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \
$(HOST_EXPORTS) \
(cd $(HOST_SUBDIR)/[+module+] && \
$(MAKE) $(FLAGS_TO_PASS) [+extra_make_flags+] install)
[+ ENDIF no_install +]
@endif [+module+]
# Other targets (info, dvi, etc.)
[+ FOR recursive_targets +]
.PHONY: maybe-[+make_target+]-[+module+] [+make_target+]-[+module+]
maybe-[+make_target+]-[+module+]:
@if [+module+]
maybe-[+make_target+]-[+module+]: [+make_target+]-[+module+]
[+ IF (match-value? = "missing" (get "make_target") ) +]
# [+module+] doesn't support [+make_target+].
[+make_target+]-[+module+]:
[+ ELSE +]
[+make_target+]-[+module+]: [+
FOR depend +]\
[+depend+]-[+module+] [+
ENDFOR depend +]
@[+ IF bootstrap +][+ ELSE +]: $(MAKE); $(unstage)
@[+ ENDIF bootstrap +][ -f ./[+module+]/Makefile ] || exit 0; \
r=`${PWD_COMMAND}`; export r; \
s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \
$(HOST_EXPORTS) \
for flag in $(EXTRA_HOST_FLAGS) [+extra_make_flags+]; do \
eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \
done; \
echo "Doing [+make_target+] in [+module+]" ; \
(cd $(HOST_SUBDIR)/[+module+] && \
$(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \
"CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \
"RANLIB=$${RANLIB}" \
"DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \
[+make_target+]) \
|| exit 1
[+ ENDIF +]
@endif [+module+]
[+ ENDFOR recursive_targets +]
[+ ENDFOR host_modules +]
# ---------------------------------------
# Modules which run on the target machine
# ---------------------------------------
[+ FOR target_modules +]
[+ IF raw_cxx +]
[+ configure prefix="target-" subdir="$(TARGET_SUBDIR)"
check_multilibs=true
exports="$(RAW_CXX_TARGET_EXPORTS)"
args="$(TARGET_CONFIGARGS)" no-config-site=true +]
[+ all prefix="target-" subdir="$(TARGET_SUBDIR)"
exports="$(RAW_CXX_TARGET_EXPORTS)"
args="$(TARGET_FLAGS_TO_PASS) 'CXX=$$(RAW_CXX_FOR_TARGET)' 'CXX_FOR_TARGET=$$(RAW_CXX_FOR_TARGET)'" +]
[+ ELSE +]
[+ configure prefix="target-" subdir="$(TARGET_SUBDIR)"
check_multilibs=true
exports="$(NORMAL_TARGET_EXPORTS)"
args="$(TARGET_CONFIGARGS)" no-config-site=true +]
[+ all prefix="target-" subdir="$(TARGET_SUBDIR)"
exports="$(NORMAL_TARGET_EXPORTS)"
args="$(TARGET_FLAGS_TO_PASS)" +]
[+ ENDIF +]
.PHONY: check-target-[+module+] maybe-check-target-[+module+]
maybe-check-target-[+module+]:
@if target-[+module+]
maybe-check-target-[+module+]: check-target-[+module+]
[+ IF no_check +]
# Dummy target for uncheckable module.
check-target-[+module+]:
[+ ELSE check +]
check-target-[+module+]:
@: $(MAKE); $(unstage)
@r=`${PWD_COMMAND}`; export r; \
s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \[+
IF raw_cxx +]
$(RAW_CXX_TARGET_EXPORTS) \[+
ELSE normal_cxx +]
$(NORMAL_TARGET_EXPORTS) \[+
ENDIF raw_cxx +]
(cd $(TARGET_SUBDIR)/[+module+] && \
$(MAKE) $(TARGET_FLAGS_TO_PASS) [+
IF raw_cxx
+] 'CXX=$$(RAW_CXX_FOR_TARGET)' 'CXX_FOR_TARGET=$$(RAW_CXX_FOR_TARGET)' [+
ENDIF raw_cxx
+] [+extra_make_flags+] check)
[+ ENDIF no_check +]
@endif target-[+module+]
.PHONY: install-target-[+module+] maybe-install-target-[+module+]
maybe-install-target-[+module+]:
@if target-[+module+]
maybe-install-target-[+module+]: install-target-[+module+]
[+ IF no_install +]
# Dummy target for uninstallable.
install-target-[+module+]:
[+ ELSE install +]
install-target-[+module+]: installdirs
@: $(MAKE); $(unstage)
@r=`${PWD_COMMAND}`; export r; \
s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \[+
IF raw_cxx +]
$(RAW_CXX_TARGET_EXPORTS) \[+
ELSE normal_cxx +]
$(NORMAL_TARGET_EXPORTS) \[+
ENDIF raw_cxx +]
(cd $(TARGET_SUBDIR)/[+module+] && \
$(MAKE) $(TARGET_FLAGS_TO_PASS) [+extra_make_flags+] install)
[+ ENDIF no_install +]
@endif target-[+module+]
# Other targets (info, dvi, etc.)
[+ FOR recursive_targets +]
.PHONY: maybe-[+make_target+]-target-[+module+] [+make_target+]-target-[+module+]
maybe-[+make_target+]-target-[+module+]:
@if target-[+module+]
maybe-[+make_target+]-target-[+module+]: [+make_target+]-target-[+module+]
[+ IF (match-value? = "missing" (get "make_target") ) +]
# [+module+] doesn't support [+make_target+].
[+make_target+]-target-[+module+]:
[+ ELSE +]
[+make_target+]-target-[+module+]: [+
FOR depend +]\
[+depend+]-target-[+module+] [+
ENDFOR depend +]
@: $(MAKE); $(unstage)
@[ -f $(TARGET_SUBDIR)/[+module+]/Makefile ] || exit 0 ; \
r=`${PWD_COMMAND}`; export r; \
s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \[+
IF raw_cxx +]
$(RAW_CXX_TARGET_EXPORTS) \[+
ELSE normal_cxx +]
$(NORMAL_TARGET_EXPORTS) \[+
ENDIF raw_cxx +]
echo "Doing [+make_target+] in $(TARGET_SUBDIR)/[+module+]" ; \
for flag in $(EXTRA_TARGET_FLAGS); do \
eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \
done; \
(cd $(TARGET_SUBDIR)/[+module+] && \
$(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \
"CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \
"RANLIB=$${RANLIB}" \
"DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \
[+extra_make_flags+] [+make_target+]) \
|| exit 1
[+ ENDIF +]
@endif target-[+module+]
[+ ENDFOR recursive_targets +]
[+ ENDFOR target_modules +]
# ----------
# GCC module
# ----------
@if gcc-no-bootstrap
# GCC has some more recursive targets, which trigger the old
# (but still current, until the toplevel bootstrap project
# is finished) compiler bootstrapping rules.
GCC_STRAP_TARGETS = bootstrap bootstrap-lean bootstrap2 bootstrap2-lean bootstrap3 bootstrap3-lean bootstrap4 bootstrap4-lean bubblestrap quickstrap cleanstrap restrap
.PHONY: $(GCC_STRAP_TARGETS)
$(GCC_STRAP_TARGETS): all-prebootstrap configure-gcc
@r=`${PWD_COMMAND}`; export r; \
s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \
$(HOST_EXPORTS) \
echo "Bootstrapping the compiler"; \
$(RPATH_ENVVAR)=`echo "$(TARGET_LIB_PATH)$$$(RPATH_ENVVAR)" | sed 's,:[ :]*,:,g;s,^[ :]*,,;s,:*$$,,'`; export $(RPATH_ENVVAR); \
cd gcc && $(MAKE) $(GCC_FLAGS_TO_PASS) $@
@r=`${PWD_COMMAND}`; export r; \
s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \
case "$@" in \
*bootstrap4-lean ) \
msg="Comparing stage3 and stage4 of the compiler"; \
compare=compare3-lean ;; \
*bootstrap4 ) \
msg="Comparing stage3 and stage4 of the compiler"; \
compare=compare3 ;; \
*-lean ) \
msg="Comparing stage2 and stage3 of the compiler"; \
compare=compare-lean ;; \
* ) \
msg="Comparing stage2 and stage3 of the compiler"; \
compare=compare ;; \
esac; \
$(HOST_EXPORTS) \
echo "$$msg"; \
cd gcc && $(MAKE) $(GCC_FLAGS_TO_PASS) $$compare
@r=`${PWD_COMMAND}`; export r; \
s=`cd $(srcdir); ${PWD_COMMAND}` ; export s; \
echo "Building runtime libraries"; \
$(MAKE) $(RECURSE_FLAGS_TO_PASS) all
profiledbootstrap: all-prebootstrap configure-gcc
@r=`${PWD_COMMAND}`; export r; \
s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \
$(HOST_EXPORTS) \
$(RPATH_ENVVAR)=`echo "$(TARGET_LIB_PATH)$$$(RPATH_ENVVAR)" | sed 's,:[ :]*,:,g;s,^[ :]*,,;s,:*$$,,'`; export $(RPATH_ENVVAR); \
echo "Bootstrapping training compiler"; \
cd gcc && $(MAKE) $(GCC_FLAGS_TO_PASS) stageprofile_build
@r=`${PWD_COMMAND}`; export r; \
s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \
$(HOST_EXPORTS) \
echo "Building feedback based compiler"; \
cd gcc && $(MAKE) $(GCC_FLAGS_TO_PASS) stagefeedback_build
@r=`${PWD_COMMAND}`; export r; \
s=`cd $(srcdir); ${PWD_COMMAND}` ; export s; \
echo "Building runtime libraries"; \
$(MAKE) $(RECURSE_FLAGS_TO_PASS) all
.PHONY: cross
cross: all-build all-gas all-ld
@r=`${PWD_COMMAND}`; export r; \
s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \
$(HOST_EXPORTS) \
echo "Building the C and C++ compiler"; \
cd gcc && $(MAKE) $(GCC_FLAGS_TO_PASS) LANGUAGES="c c++"
@r=`${PWD_COMMAND}`; export r; \
s=`cd $(srcdir); ${PWD_COMMAND}` ; export s; \
echo "Building runtime libraries"; \
$(MAKE) $(RECURSE_FLAGS_TO_PASS) LANGUAGES="c c++" all
@endif gcc-no-bootstrap
@if gcc
.PHONY: check-gcc-c++
check-gcc-c++:
@if [ -f ./gcc/Makefile ] ; then \
r=`${PWD_COMMAND}`; export r; \
s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \
$(HOST_EXPORTS) \
(cd gcc && $(MAKE) $(GCC_FLAGS_TO_PASS) check-c++); \
else \
true; \
fi
.PHONY: check-c++
check-c++: check-target-libstdc++-v3 check-gcc-c++
# Install the gcc headers files, but not the fixed include files,
# which Cygnus is not allowed to distribute. This rule is very
# dependent on the workings of the gcc Makefile.in.
.PHONY: gcc-no-fixedincludes
gcc-no-fixedincludes:
@if [ -f ./gcc/Makefile ]; then \
rm -rf gcc/tmp-include; \
mv gcc/include gcc/tmp-include 2>/dev/null; \
mkdir gcc/include; \
cp $(srcdir)/gcc/gsyslimits.h gcc/include/syslimits.h; \
touch gcc/stmp-fixinc gcc/include/fixed; \
rm -f gcc/stmp-headers gcc/stmp-int-hdrs; \
r=`${PWD_COMMAND}`; export r; \
s=`cd $(srcdir); ${PWD_COMMAND}` ; export s; \
$(HOST_EXPORTS) \
(cd ./gcc && \
$(MAKE) $(GCC_FLAGS_TO_PASS) install); \
rm -rf gcc/include; \
mv gcc/tmp-include gcc/include 2>/dev/null; \
else true; fi
@endif gcc
# ---------------------
# GCC bootstrap support
# ---------------------
# We track the current stage (the one in 'gcc') in the stage_current file.
# stage_last instead tracks the stage that was built last. These targets
# are dummy when toplevel bootstrap is not active.
# While making host and target tools, symlinks to the final stage must be
# there, so $(unstage) should be run at various points. To avoid excessive
# recursive invocations of make, we "inline" them using a variable. These
# must be referenced as ": $(MAKE) ; $(unstage)" rather than "$(unstage)"
# to avoid warnings from the GNU Make job server.
unstage = :
stage = :
current_stage = ""
@if gcc-bootstrap
unstage = [ -f stage_current ] || $(MAKE) `cat stage_last`-start
stage = if [ -f stage_current ]; then $(MAKE) `cat stage_current`-end || exit 1; else :; fi
current_stage = "`cat stage_current 2> /dev/null`"
@endif gcc-bootstrap
.PHONY: unstage stage
unstage:
@: $(MAKE); $(unstage)
stage:
@: $(MAKE); $(stage)
# Disable commands for lean bootstrap.
LEAN = false
# We name the build directories for the various stages "stage1-gcc",
# "stage2-gcc","stage3-gcc", etc.
# Since the 'compare' process will fail (on debugging information) if any
# directory names are different, we need to link the gcc directory for
# the previous stage to a constant name ('prev-gcc'), and to make the name of
# the build directories constant as well. For the latter, we use naked names
# like 'gcc', because the scripts in that directory assume it. We use
# mv on platforms where symlinks to directories do not work or are not
# reliable.
# 'touch' doesn't work right on some platforms.
STAMP = echo timestamp >
# Only build the C compiler for stage1, because that is the only one that
# we can guarantee will build with the native compiler, and also it is the
# only thing useful for building stage2. STAGE1_CFLAGS (via CFLAGS),
# MAKEINFO and MAKEINFOFLAGS are explicitly passed here to make them
# overrideable (for a bootstrap build stage1 also builds gcc.info).
STAGE1_CFLAGS=@stage1_cflags@
STAGE1_LANGUAGES=@stage1_languages@
# We only want to compare .o files, so set this!
objext = .o
# Flags to pass to stage2 and later makes.
POSTSTAGE1_FLAGS_TO_PASS = \
CC="$${CC}" CC_FOR_BUILD="$${CC_FOR_BUILD}" \
STAGE_PREFIX=$$r/prev-gcc/ \
CFLAGS="$(BOOT_CFLAGS)" \
LIBCFLAGS="$(BOOT_CFLAGS)" \
LDFLAGS="$(BOOT_LDFLAGS)" \
ADAC="\$$(CC)"
# For stage 1:
# * We force-disable intermodule optimizations, even if
# --enable-intermodule was passed, since the installed compiler probably
# can't handle them. Luckily, autoconf always respects
# the last argument when conflicting --enable arguments are passed.
# * Likewise, we force-disable coverage flags, since the installed compiler
# probably has never heard of them.
# * We build only C (and possibly Ada).
[+ FOR bootstrap-stage +]
.PHONY: stage[+id+]-start stage[+id+]-end
stage[+id+]-start::
@: $(MAKE); $(stage); \
echo stage[+id+] > stage_current ; \
echo stage[+id+] > stage_last; \
$(SHELL) $(srcdir)/mkinstalldirs $(HOST_SUBDIR)[+
FOR host_modules +][+ IF bootstrap +]
@if [+ module +]
@cd $(HOST_SUBDIR); [ -d stage[+id+]-[+module+] ] || \
mkdir stage[+id+]-[+module+]; \
mv stage[+id+]-[+module+] [+module+] [+ IF prev +] ; \
mv stage[+prev+]-[+module+] prev-[+module+] || test -f stage[+prev+]-lean [+ ENDIF prev +]
@endif [+ module +][+ ENDIF bootstrap +][+ ENDFOR host_modules +]
@[ -d stage[+id+]-$(TARGET_SUBDIR) ] || \
mkdir stage[+id+]-$(TARGET_SUBDIR); \
mv stage[+id+]-$(TARGET_SUBDIR) $(TARGET_SUBDIR) [+ IF prev +] ; \
mv stage[+prev+]-$(TARGET_SUBDIR) prev-$(TARGET_SUBDIR) || test -f stage[+prev+]-lean [+ ENDIF prev +]
stage[+id+]-end:: [+ FOR host_modules +][+ IF bootstrap +]
@if [+ module +]
@if test -d $(HOST_SUBDIR)/[+module+] ; then \
cd $(HOST_SUBDIR); mv [+module+] stage[+id+]-[+module+] [+ IF prev +]; \
mv prev-[+module+] stage[+prev+]-[+module+] ; : [+ ENDIF prev +] ; \
fi
@endif [+ module +][+ ENDIF bootstrap +][+ ENDFOR host_modules +]
@if test -d $(TARGET_SUBDIR) ; then \
mv $(TARGET_SUBDIR) stage[+id+]-$(TARGET_SUBDIR) [+ IF prev +] ; \
mv prev-$(TARGET_SUBDIR) stage[+prev+]-$(TARGET_SUBDIR) ; : [+ ENDIF prev +] ; \
fi
rm -f stage_current
# Bubble a bugfix through all the stages up to stage [+id+]. They are
# remade, but not reconfigured. The next stage (if any) will not be
# reconfigured as well.
.PHONY: stage[+id+]-bubble
stage[+id+]-bubble:: [+ IF prev +]stage[+prev+]-bubble[+ ENDIF +]
@r=`${PWD_COMMAND}`; export r; \
s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \
if test -f stage[+id+]-lean [+
IF prev +]|| test -f stage[+prev+]-lean [+ ENDIF prev +] ; then \
echo Skipping rebuild of stage[+id+] ; \
else \
$(MAKE) stage[+id+]-start; \[+IF lean +]
if $(LEAN); then \
rm -rf stage[+lean+]-* ; \
$(STAMP) stage[+lean+]-lean ; \
fi; \[+ ENDIF lean +]
$(MAKE) $(RECURSE_FLAGS_TO_PASS) all-stage[+id+]; \
toplevel: 2005-12-05 Paolo Bonzini <bonzini@gnu.org> Sync with gcc: 2005-12-05 Paolo Bonzini <bonzini@gnu.org> * configure.in (CONFIGURED_BISON, CONFIGURED_YACC, CONFIGURED_M4, CONFIGURED_FLEX, CONFIGURED_LEX, CONFIGURED_MAKEINFO): Remove "CONFIGURED_" from the AC_CHECK_PROGS invocation. Move below. Find in-tree tools if available. (EXPECT, RUNTEST, LIPO, STRIP): Find them and substitute them. (CONFIGURED_*_FOR_TARGET): Don't set nor substitute. (*_FOR_TARGET): Set them with GCC_TARGET_TOOL. (COMPILER_*_FOR_TARGET): New. * Makefile.tpl (HOST_EXPORTS): Add *_FOR_TARGET symbols that gcc needs. (BASE_TARGET_EXPORTS): Use COMPILER_*_FOR_TARGET symbols. (CONFIGURED_*, USUAL_*): Remove. (BISON, YACC, FLEX, LEX, M4, MAKEINFO, EXPECT, RUNTEST, LIPO, STRIP): Use autoconf substitutions. (COMPILER_AS_FOR_TARGET, COMPILER_LD_FOR_TARGET, COMPILER_NM_FOR_TARGET): New. (EXTRA_HOST_FLAGS): Pass LIPO and STRIP. (all): Make all-host and all-target in parallel. (do-[+make_target+], do-check, install, [+compare-target+]): Ensure that $$r and $$s are set before invoking a recursive make. (stage[+id+]-bubble): Likewise, and invoke the comparison at the end. ([+bootstrap-target+]): Inline most of the `all' target. 2005-11-29 Ben Elliston <bje@au.ibm.com> * Makefile.tpl (clean-target-libgcc): Invoke clean-target-libgcc from the gcc build directory. * Makefile.in: Regenerate. 2005-11-29 Ben Elliston <bje@au.ibm.com> * Makefile.def: Add new libdecnumber host_module. Make all-gcc depend on all-libdecnumber. * configure.in (host_libs): Include libdecnumber. * Makefile.in: Regenerate. * configure: Likewise. 2005-11-21 Kean Johnston <jkj@sco.com> * config.sub, config.guess: Sync from upstream sources. config: 2005-12-05 Paolo Bonzini <bonzini@gnu.org> * acx.m4 (GCC_TARGET_TOOL): New.
2005-12-05 16:16:05 +01:00
fi[+ IF compare-target +]
$(MAKE) $(RECURSE_FLAGS_TO_PASS) [+compare-target+][+ ENDIF compare-target +]
.PHONY: all-stage[+id+] clean-stage[+id+]
do-clean: clean-stage[+id+]
# FIXME: Will not need to be conditional when toplevel bootstrap is the
# only possibility, but now it conflicts with no-bootstrap rules
@if gcc-bootstrap
[+ IF compare-target +]
[+compare-target+]:
@r=`${PWD_COMMAND}`; export r; \
s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \
if test -f stage[+prev+]-lean; then \
echo Cannot compare object files as stage [+prev+] was deleted. ; \
exit 0 ; \
fi; \
: $(MAKE); $(stage); \
rm -f .bad_compare ; \
echo Comparing stages [+prev+] and [+id+] ; \
cd stage[+id+]-gcc; \
files=`find . -name "*$(objext)" -print` ; \
cd .. ; \
for file in $${files} ; do \
f1=$$r/stage[+prev+]-gcc/$$file; f2=$$r/stage[+id+]-gcc/$$file; \
@do_compare@ > /dev/null 2>&1; \
if test $$? -eq 1; then \
case $$file in \
./cc*-checksum$(objext) | ./libgcc/* ) \
echo warning: $$file differs ;; \
*) \
echo $$file differs >> .bad_compare ;; \
esac ; \
fi ; \
done ; \
if [ -f .bad_compare ]; then \
echo "Bootstrap comparison failure!"; \
cat .bad_compare; \
exit 1; \
else \
echo Comparison successful.; \
fi ; \
$(STAMP) [+compare-target+][+ IF prev +]
if $(LEAN); then \
rm -rf stage[+prev+]-*; \
$(STAMP) stage[+prev+]-lean; \
fi[+ ENDIF prev +]
[+ ENDIF compare-target +]
[+ IF bootstrap-target +]
.PHONY: [+bootstrap-target+] [+bootstrap-target+]-lean
toplevel: 2005-12-05 Paolo Bonzini <bonzini@gnu.org> Sync with gcc: 2005-12-05 Paolo Bonzini <bonzini@gnu.org> * configure.in (CONFIGURED_BISON, CONFIGURED_YACC, CONFIGURED_M4, CONFIGURED_FLEX, CONFIGURED_LEX, CONFIGURED_MAKEINFO): Remove "CONFIGURED_" from the AC_CHECK_PROGS invocation. Move below. Find in-tree tools if available. (EXPECT, RUNTEST, LIPO, STRIP): Find them and substitute them. (CONFIGURED_*_FOR_TARGET): Don't set nor substitute. (*_FOR_TARGET): Set them with GCC_TARGET_TOOL. (COMPILER_*_FOR_TARGET): New. * Makefile.tpl (HOST_EXPORTS): Add *_FOR_TARGET symbols that gcc needs. (BASE_TARGET_EXPORTS): Use COMPILER_*_FOR_TARGET symbols. (CONFIGURED_*, USUAL_*): Remove. (BISON, YACC, FLEX, LEX, M4, MAKEINFO, EXPECT, RUNTEST, LIPO, STRIP): Use autoconf substitutions. (COMPILER_AS_FOR_TARGET, COMPILER_LD_FOR_TARGET, COMPILER_NM_FOR_TARGET): New. (EXTRA_HOST_FLAGS): Pass LIPO and STRIP. (all): Make all-host and all-target in parallel. (do-[+make_target+], do-check, install, [+compare-target+]): Ensure that $$r and $$s are set before invoking a recursive make. (stage[+id+]-bubble): Likewise, and invoke the comparison at the end. ([+bootstrap-target+]): Inline most of the `all' target. 2005-11-29 Ben Elliston <bje@au.ibm.com> * Makefile.tpl (clean-target-libgcc): Invoke clean-target-libgcc from the gcc build directory. * Makefile.in: Regenerate. 2005-11-29 Ben Elliston <bje@au.ibm.com> * Makefile.def: Add new libdecnumber host_module. Make all-gcc depend on all-libdecnumber. * configure.in (host_libs): Include libdecnumber. * Makefile.in: Regenerate. * configure: Likewise. 2005-11-21 Kean Johnston <jkj@sco.com> * config.sub, config.guess: Sync from upstream sources. config: 2005-12-05 Paolo Bonzini <bonzini@gnu.org> * acx.m4 (GCC_TARGET_TOOL): New.
2005-12-05 16:16:05 +01:00
[+bootstrap-target+]:
echo stage[+id+] > stage_final
@r=`${PWD_COMMAND}`; export r; \
s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \
$(MAKE) $(RECURSE_FLAGS_TO_PASS) stage[+id+]-bubble
@: $(MAKE); $(unstage)
toplevel: 2005-12-05 Paolo Bonzini <bonzini@gnu.org> Sync with gcc: 2005-12-05 Paolo Bonzini <bonzini@gnu.org> * configure.in (CONFIGURED_BISON, CONFIGURED_YACC, CONFIGURED_M4, CONFIGURED_FLEX, CONFIGURED_LEX, CONFIGURED_MAKEINFO): Remove "CONFIGURED_" from the AC_CHECK_PROGS invocation. Move below. Find in-tree tools if available. (EXPECT, RUNTEST, LIPO, STRIP): Find them and substitute them. (CONFIGURED_*_FOR_TARGET): Don't set nor substitute. (*_FOR_TARGET): Set them with GCC_TARGET_TOOL. (COMPILER_*_FOR_TARGET): New. * Makefile.tpl (HOST_EXPORTS): Add *_FOR_TARGET symbols that gcc needs. (BASE_TARGET_EXPORTS): Use COMPILER_*_FOR_TARGET symbols. (CONFIGURED_*, USUAL_*): Remove. (BISON, YACC, FLEX, LEX, M4, MAKEINFO, EXPECT, RUNTEST, LIPO, STRIP): Use autoconf substitutions. (COMPILER_AS_FOR_TARGET, COMPILER_LD_FOR_TARGET, COMPILER_NM_FOR_TARGET): New. (EXTRA_HOST_FLAGS): Pass LIPO and STRIP. (all): Make all-host and all-target in parallel. (do-[+make_target+], do-check, install, [+compare-target+]): Ensure that $$r and $$s are set before invoking a recursive make. (stage[+id+]-bubble): Likewise, and invoke the comparison at the end. ([+bootstrap-target+]): Inline most of the `all' target. 2005-11-29 Ben Elliston <bje@au.ibm.com> * Makefile.tpl (clean-target-libgcc): Invoke clean-target-libgcc from the gcc build directory. * Makefile.in: Regenerate. 2005-11-29 Ben Elliston <bje@au.ibm.com> * Makefile.def: Add new libdecnumber host_module. Make all-gcc depend on all-libdecnumber. * configure.in (host_libs): Include libdecnumber. * Makefile.in: Regenerate. * configure: Likewise. 2005-11-21 Kean Johnston <jkj@sco.com> * config.sub, config.guess: Sync from upstream sources. config: 2005-12-05 Paolo Bonzini <bonzini@gnu.org> * acx.m4 (GCC_TARGET_TOOL): New.
2005-12-05 16:16:05 +01:00
@r=`${PWD_COMMAND}`; export r; \
s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \
$(MAKE) $(TARGET_FLAGS_TO_PASS) all-host all-target
[+bootstrap-target+]-lean:
echo stage[+id+] > stage_final
@r=`${PWD_COMMAND}`; export r; \
s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \
$(MAKE) $(RECURSE_FLAGS_TO_PASS) LEAN=: stage[+id+]-bubble
@: $(MAKE); $(unstage)
@r=`${PWD_COMMAND}`; export r; \
s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \
$(MAKE) $(TARGET_FLAGS_TO_PASS) all-host all-target
[+ ENDIF bootstrap-target +]
# Rules to wipe a stage and all the following ones, also used for cleanstrap
[+ IF prev +]distclean-stage[+prev+]:: distclean-stage[+id+] [+ ENDIF prev +]
.PHONY: distclean-stage[+id+]
distclean-stage[+id+]::
@: $(MAKE); $(stage)
rm -rf stage[+id+]-* [+
IF compare-target +][+compare-target+] [+ ENDIF compare-target +]
[+ IF cleanstrap-target +]
.PHONY: [+cleanstrap-target+]
[+cleanstrap-target+]: distclean [+bootstrap-target+]
[+ ENDIF cleanstrap-target +]
@endif gcc-bootstrap
[+ ENDFOR bootstrap-stage +]
stageprofile-end::
$(MAKE) distclean-stagefeedback
stagefeedback-start::
@r=`${PWD_COMMAND}`; export r; \
s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \
for i in prev-*; do \
j=`echo $$i | sed s/^prev-//` ; \
cd $$r/$$i && \
{ find . -type d | sort | sed 's,.*,$(SHELL) '"$$s"'/mkinstalldirs "../'$$j'/&",' | $(SHELL) ; } && \
{ find . -name '*.*da' | sed 's,.*,$(LN) -f "&" "../'$$j'/&",' | $(SHELL) ; } ; \
done
@if gcc-bootstrap
do-distclean: distclean-stage1
# Provide a GCC build when we're building target libraries. This does
# not work as a dependency, just as the minimum necessary to avoid errors.
stage_last:
$(MAKE) $(RECURSE_FLAGS_TO_PASS) stage1-bubble
@endif gcc-bootstrap
.PHONY: restrap
restrap:
@: $(MAKE); $(stage)
rm -rf stage1-$(TARGET_SUBDIR) [+ FOR bootstrap-stage +][+ IF prev
+]stage[+id+] [+ ENDIF prev +][+ ENDFOR bootstrap-stage +]
$(MAKE) $(RECURSE_FLAGS_TO_PASS) all
# --------------------------------------
# Dependencies between different modules
# --------------------------------------
# Generic dependencies for target modules on host stuff, especially gcc
@if gcc-bootstrap[+ FOR target_modules +][+ IF bootstrap
+][+ FOR bootstrap_stage +]
configure-stage[+id+]-target-[+module+]: maybe-all-stage[+id+]-gcc[+
ENDFOR +][+ ELSE bootstrap +]
configure-target-[+module+]: stage_last[+
ENDIF bootstrap +][+ ENDFOR target_modules +]
@endif gcc-bootstrap
@if gcc-no-bootstrap[+ FOR target_modules +][+ IF bootstrap
+][+ ELSE +]
configure-target-[+module+]: maybe-all-gcc[+
ENDIF bootstrap +][+ ENDFOR target_modules +]
@endif gcc-no-bootstrap
[+ FOR lang_env_dependencies +]
configure-target-[+module+]: maybe-all-target-newlib maybe-all-target-libgloss
[+ IF cxx +]configure-target-[+module+]: maybe-all-target-libstdc++-v3
[+ ENDIF cxx +][+ ENDFOR lang_env_dependencies +]
# There are two types of dependencies here: 'hard' dependencies, where one
# module simply won't build without the other; and 'soft' dependencies, where
# if the depended-on module is missing, the depending module will do without
# or find a substitute somewhere (perhaps installed). Soft dependencies
# are made here to depend on a 'maybe-' target. If you're not sure,
# it's safer to use a soft dependency.
[+ ;; These Scheme functions build the bulk of the dependencies.
;; dep-target builds a string like "maybe-all-MODULE_KIND-gcc",
;; where "maybe-" is only included if HARD is true, and all-gcc
;; is taken from VAR-NAME.
(define dep-target (lambda (module-kind var-name hard)
(string-append
(if hard "" "maybe-")
(dep-subtarget var-name)
module-kind
(dep-module var-name)
)))
;; make-dep builds a dependency from the MODULE and ON AutoGen vars.
(define make-dep (lambda (module-kind on-kind)
(string-append
(dep-target module-kind "module" #t) ": "
(dep-target on-kind "on" (exist? "hard")))))
;; dep-subtarget extracts everything up to the first dash in the given
;; AutoGen variable, for example it extracts "all-" out of "all-gcc".
(define dep-subtarget (lambda (var-name)
(substring (get var-name) 0 (+ 1 (string-index (get var-name) #\-)))))
;; dep-module extracts everything up to the first dash in the given
;; AutoGen variable, for example it extracts "gcc" out of "all-gcc".
(define dep-module (lambda (var-name)
(substring (get var-name) (+ 1 (string-index (get var-name) #\-)))))
;; dep-stage builds a string for the prefix of a bootstrap stage.
(define dep-stage (lambda ()
(string-append
"stage"
(get "id")
"-")))
;; dep-maybe is the same as the AutoGen expression "- hard 'maybe-'"
;; but is written in Scheme.
(define dep-maybe (lambda ()
(if (exist? "hard") "" "maybe-")))
;; dep-kind returns "normal" if the dependency is on an "install" target,
;; or if either module is not bootstrapped. It returns "bootstrap" for
;; configure or build dependencies between bootstrapped modules; it returns
;; "prebootstrap" for configure or build dependencies of bootstrapped
;; modules on a build module (e.g. all-gcc on all-build-bison). All this
;; is only necessary for host modules.
(define dep-kind (lambda ()
(if (and (hash-ref boot-modules (dep-module "module"))
(=* (dep-module "on") "build-"))
"prebootstrap"
(if (or (= (dep-subtarget "on") "install-")
(not (hash-ref boot-modules (dep-module "module")))
(not (hash-ref boot-modules (dep-module "on"))))
"normal"
"bootstrap"))))
;; We now build the hash table that is used by dep-kind.
(define boot-modules (make-hash-table 113))
+]
[+ FOR host_modules +][+
(if (exist? "bootstrap")
(hash-create-handle! boot-modules (get "module") #t))
"" +][+ ENDFOR host_modules +]
[+ FOR target_modules +][+
(if (exist? "bootstrap")
(hash-create-handle! boot-modules (string-append "target-" (get "module")) #t))
"" +][+ ENDFOR target_modules +]
# With all the machinery above in place, it is pretty easy to generate
# dependencies. Host dependencies are a bit more complex because we have
# to check for bootstrap/prebootstrap dependencies. To resolve
# prebootstrap dependencies, prebootstrap modules are gathered in
# a hash table.
[+ FOR dependencies +][+ (make-dep "" "") +]
[+ CASE (dep-kind) +]
[+ == "prebootstrap"
+][+ FOR bootstrap_stage +]
[+ (make-dep (dep-stage) "") +][+
ENDFOR bootstrap_stage +]
all-prebootstrap: [+ (dep-target "" "on" (exist? "hard")) +]
[+ == "bootstrap"
+][+ FOR bootstrap_stage +]
[+ (make-dep (dep-stage) (dep-stage)) +][+
ENDFOR bootstrap_stage +]
[+ ESAC +][+
ENDFOR dependencies +]
# Non-toplevel bootstrap rules must depend on several packages, to be built
# before gcc. Another wart that will go away, hopefully soon.
@if gcc-no-bootstrap
[+ FOR host_modules +][+
IF (and (not (= (get "module") "gcc"))
(hash-ref boot-modules (get "module"))) +]
all-prebootstrap: maybe-all-[+module+][+
ENDIF +][+
ENDFOR host_modules +]
@endif gcc-no-bootstrap
CONFIGURE_GDB_TK = @CONFIGURE_GDB_TK@
GDB_TK = @GDB_TK@
INSTALL_GDB_TK = @INSTALL_GDB_TK@
configure-gdb: $(CONFIGURE_GDB_TK)
all-gdb: $(gdbnlmrequirements) $(GDB_TK)
install-gdb: $(INSTALL_GDB_TK)
# Serialization dependencies. Host configures don't work well in parallel to
# each other, due to contention over config.cache. Target configures and
# build configures are similar.
@serialization_dependencies@
# --------------------------------
# Regenerating top level configury
# --------------------------------
# Rebuilding Makefile.in, using autogen.
AUTOGEN = autogen
$(srcdir)/Makefile.in: @MAINT@ $(srcdir)/Makefile.tpl $(srcdir)/Makefile.def
cd $(srcdir) && $(AUTOGEN) Makefile.def
# Rebuilding Makefile.
Makefile: $(srcdir)/Makefile.in config.status
CONFIG_FILES=$@ CONFIG_HEADERS= $(SHELL) ./config.status
config.status: configure
CONFIG_SHELL="$(SHELL)" $(SHELL) ./config.status --recheck
# Rebuilding configure.
AUTOCONF = autoconf
$(srcdir)/configure: @MAINT@ $(srcdir)/configure.in $(srcdir)/config/acx.m4
cd $(srcdir) && $(AUTOCONF)
# ------------------------------
# Special directives to GNU Make
# ------------------------------
# Don't pass command-line variables to submakes.
.NOEXPORT:
MAKEOVERRIDES=
# end of Makefile.in