mksh/mirhash.h

227 lines
8.3 KiB
C
Raw Permalink Blame History

This file contains ambiguous Unicode characters

This file contains Unicode characters that might be confused with other characters. If you think that this is intentional, you can safely ignore this warning. Use the Escape button to reveal them.

/*-
* Copyright © 2011, 2014, 2015
* mirabilos <m@mirbsd.org>
*
* Provided that these terms and disclaimer and all copyright notices
* are retained or reproduced in an accompanying document, permission
* is granted to deal in this work without restriction, including un
* limited rights to use, publicly perform, distribute, sell, modify,
* merge, give away, or sublicence.
*
* This work is provided “AS IS” and WITHOUT WARRANTY of any kind, to
* the utmost extent permitted by applicable law, neither express nor
* implied; without malicious intent or gross negligence. In no event
* may a licensor, author or contributor be held liable for indirect,
* direct, other damage, loss, or other issues arising in any way out
* of dealing in the work, even if advised of the possibility of such
* damage or existence of a defect, except proven that it results out
* of said persons immediate fault when using the work as intended.
*-
* This file provides BAFH (Better Avalanche for the Jenkins Hash) as
* inline macro bodies that operate on “register uint32_t” variables,
* with variants that use their local intermediate registers.
*
* Usage note for BAFH with entropy distribution: input up to 4 bytes
* is best combined into a 32-bit unsigned integer, which is then run
* through BAFHFinish_reg for mixing and then used as context instead
* of 0. Longer input should be handled the same: take the first four
* bytes as IV after mixing then add subsequent bytes the same way.
* This needs counting input bytes and is endian-dependent, thus not,
* for speed reasons, specified for the regular stable hash, but very
* much recommended if the actual output value may differ across runs
* (so is using a random value instead of 0 for the IV).
*-
* Little quote gem:
* We are looking into it. Changing the core
* hash function in PHP isn't a trivial change
* and will take us some time.
* -- Rasmus Lerdorf
*/
#ifndef SYSKERN_MIRHASH_H
#define SYSKERN_MIRHASH_H 1
#define SYSKERN_MIRHASH_BAFH
#include <sys/types.h>
__RCSID("$MirOS: src/bin/mksh/mirhash.h,v 1.6 2015/11/29 17:05:02 tg Exp $");
/*-
* BAFH itself is defined by the following primitives:
*
* • BAFHInit(ctx) initialises the hash context, which consists of a
* sole 32-bit unsigned integer (ideally in a register), to 0.
* It is possible to use any initial value out of [0; 2³²[ which
* is, in fact, recommended if using BAFH for entropy distribution
* but for a regular stable hash, the IV 0 is needed.
*
* • BAFHUpdateOctet(ctx,val) compresses the unsigned 8-bit quantity
* into the hash context. The algorithm used is Jenkins one-at-a-
* time, except that an additional constant 1 is added so that, if
* the context is (still) zero, adding a NUL byte is not ignored.
*
* • BAFHror(eax,cl) evaluates to the unsigned 32-bit integer “eax”,
* rotated right by “cl” ∈ [0; 31] (no casting, be careful!) where
* “eax” must be uint32_t and “cl” an in-range integer.
*
* • BAFHFinish(ctx) avalanches the context around so every sub-byte
* depends on all input octets; afterwards, the context variables
* value is the hash output. BAFH does not use any padding, nor is
* the input length added; this is due to the common use case (for
* quick entropy distribution and use with a hashtable).
* Warning: BAFHFinish uses the MixColumn algorithm of AES which
* is reversible (to avoid introducing funnels and reducing entro
* py), so blinding may need to be employed for some uses, e.g. in
* mksh, after a fork.
*
* The BAFHUpdateOctet and BAFHFinish are available in two flavours:
* suffixed with _reg (assumes the context is in a register) or _mem
* (which doesnt).
*
* The following high-level macros (with _reg and _mem variants) are
* available:
*
* • BAFHUpdateMem(ctx,buf,len) adds a memory block to a context.
* • BAFHUpdateStr(ctx,buf) is equivalent to using len=strlen(buf).
* • BAFHHostMem(ctx,buf,len) calculates the hash of the memory buf
* fer using the first 4 octets (mixed) for IV, as outlined above;
* the result is endian-dependent; “ctx” assumed to be a register.
* • BAFHHostStr(ctx,buf) does the same for C strings.
*
* All macros may use ctx multiple times in their expansion, but all
* other arguments are always evaluated at most once except BAFHror.
*
* To stay portable, never use the BAFHHost*() macros (these are for
* host-local entropy shuffling), and encode numbers using ULEB128.
*/
#define BAFHInit(h) do { \
(h) = 0; \
} while (/* CONSTCOND */ 0)
#define BAFHUpdateOctet_reg(h,b) do { \
(h) += (uint8_t)(b); \
++(h); \
(h) += (h) << 10; \
(h) ^= (h) >> 6; \
} while (/* CONSTCOND */ 0)
#define BAFHUpdateOctet_mem(m,b) do { \
register uint32_t BAFH_h = (m); \
\
BAFHUpdateOctet_reg(BAFH_h, (b)); \
(m) = BAFH_h; \
} while (/* CONSTCOND */ 0)
#define BAFHror(eax,cl) (((eax) >> (cl)) | ((eax) << (32 - (cl))))
#define BAFHFinish_reg(h) do { \
register uint32_t BAFHFinish_v; \
\
BAFHFinish_v = ((h) >> 7) & 0x01010101U; \
BAFHFinish_v += BAFHFinish_v << 1; \
BAFHFinish_v += BAFHFinish_v << 3; \
BAFHFinish_v ^= ((h) << 1) & 0xFEFEFEFEU; \
\
BAFHFinish_v ^= BAFHror(BAFHFinish_v, 8); \
BAFHFinish_v ^= ((h) = BAFHror((h), 8)); \
BAFHFinish_v ^= ((h) = BAFHror((h), 8)); \
(h) = BAFHror((h), 8) ^ BAFHFinish_v; \
} while (/* CONSTCOND */ 0)
#define BAFHFinish_mem(m) do { \
register uint32_t BAFHFinish_v, BAFH_h = (m); \
\
BAFHFinish_v = (BAFH_h >> 7) & 0x01010101U; \
BAFHFinish_v += BAFHFinish_v << 1; \
BAFHFinish_v += BAFHFinish_v << 3; \
BAFHFinish_v ^= (BAFH_h << 1) & 0xFEFEFEFEU; \
\
BAFHFinish_v ^= BAFHror(BAFHFinish_v, 8); \
BAFHFinish_v ^= (BAFH_h = BAFHror(BAFH_h, 8)); \
BAFHFinish_v ^= (BAFH_h = BAFHror(BAFH_h, 8)); \
(m) = BAFHror(BAFH_h, 8) ^ BAFHFinish_v; \
} while (/* CONSTCOND */ 0)
#define BAFHUpdateMem_reg(h,p,z) do { \
register const uint8_t *BAFHUpdate_p; \
register size_t BAFHUpdate_z = (z); \
\
BAFHUpdate_p = (const void *)(p); \
while (BAFHUpdate_z--) \
BAFHUpdateOctet_reg((h), *BAFHUpdate_p++); \
} while (/* CONSTCOND */ 0)
/* meh should have named them _r/m but thats not valid C */
#define BAFHUpdateMem_mem(m,p,z) do { \
register uint32_t BAFH_h = (m); \
\
BAFHUpdateMem_reg(BAFH_h, (p), (z)); \
(m) = BAFH_h; \
} while (/* CONSTCOND */ 0)
#define BAFHUpdateStr_reg(h,s) do { \
register const uint8_t *BAFHUpdate_s; \
register uint8_t BAFHUpdate_c; \
\
BAFHUpdate_s = (const void *)(s); \
while ((BAFHUpdate_c = *BAFHUpdate_s++) != 0) \
BAFHUpdateOctet_reg((h), BAFHUpdate_c); \
} while (/* CONSTCOND */ 0)
#define BAFHUpdateStr_mem(m,s) do { \
register uint32_t BAFH_h = (m); \
\
BAFHUpdateStr_reg(BAFH_h, (s)); \
(m) = BAFH_h; \
} while (/* CONSTCOND */ 0)
#define BAFHHostMem(h,p,z) do { \
register const uint8_t *BAFHUpdate_p; \
register size_t BAFHUpdate_z = (z); \
size_t BAFHHost_z; \
union { \
uint8_t as_u8[4]; \
uint32_t as_u32; \
} BAFHHost_v; \
\
BAFHUpdate_p = (const void *)(p); \
BAFHHost_v.as_u32 = 0; \
BAFHHost_z = BAFHUpdate_z < 4 ? BAFHUpdate_z : 4; \
memcpy(BAFHHost_v.as_u8, BAFHUpdate_p, BAFHHost_z); \
BAFHUpdate_p += BAFHHost_z; \
BAFHUpdate_z -= BAFHHost_z; \
(h) = BAFHHost_v.as_u32; \
BAFHFinish_reg(h); \
while (BAFHUpdate_z--) \
BAFHUpdateOctet_reg((h), *BAFHUpdate_p++); \
BAFHFinish_reg(h); \
} while (/* CONSTCOND */ 0)
#define BAFHHostStr(h,s) do { \
register const uint8_t *BAFHUpdate_s; \
register uint8_t BAFHUpdate_c; \
union { \
uint8_t as_u8[4]; \
uint32_t as_u32; \
} BAFHHost_v; \
\
BAFHUpdate_s = (const void *)(s); \
BAFHHost_v.as_u32 = 0; \
if ((BAFHHost_v.as_u8[0] = *BAFHUpdate_s) != 0) \
++BAFHUpdate_s; \
if ((BAFHHost_v.as_u8[1] = *BAFHUpdate_s) != 0) \
++BAFHUpdate_s; \
if ((BAFHHost_v.as_u8[2] = *BAFHUpdate_s) != 0) \
++BAFHUpdate_s; \
if ((BAFHHost_v.as_u8[3] = *BAFHUpdate_s) != 0) \
++BAFHUpdate_s; \
(h) = BAFHHost_v.as_u32; \
BAFHFinish_reg(h); \
while ((BAFHUpdate_c = *BAFHUpdate_s++) != 0) \
BAFHUpdateOctet_reg((h), BAFHUpdate_c); \
BAFHFinish_reg(h); \
} while (/* CONSTCOND */ 0)
#endif