a mirtoconf check, would’ve been a real problem on an LP64 platform
• sh.h: work around a bad interaction between -Wformat on gcc and manual
string pooling for T_synerr, which is used in place of a format string
in some places
– possible integer overflows in memory allocation, mostly
‣ multiplication: all are checked now
‣ addition: reviewed them, most were “proven” or guessed to be
“almost” impossible to run over (e.g. when we have a string
whose length is taken it is assumed that the length will be
more than only a few bytes below SIZE_MAX, since code and
stack have to fit); some are checked now (e.g. when one of
the summands is an off_t); most of the unchecked ones are
annotated now
⇒ cost (MirBSD/i386 static): +76 .text
⇒ cost (Debian sid/i386): +779 .text -4 .data
– on Linux targets, setuid() setresuid() setresgid() can fail
with EAGAIN; check for that and, if so, warn once and retry
infinitely (other targets to be added later once we know that
they are “insane”)
⇒ cost (Debian sid/i386): +192 .text (includes .rodata)
• setmode.c: Do overflow checking for realloc() too; switch back
from calloc() to a checked malloc() for simplification while there
• define -DIN_MKSH and let setmode.c look a tad nicer while here
we don’t get SIGWINCH when the window size changes during the runtime of
that, so, the signal is only usable reliably during editing in the shell
and we re-check the window size before each interactive edit line again
a string buffer whose window size is currently 32 (initial), your data
is 96 bytes, this routine used to resize the buffer to 64, append your
first 64 bytes to it (no matter if there's already something in it)
and then writes the remaining bytes to stdio fd instead of the string…
if it doesn’t SIGABRT before
discovered by wbx@ – thanks – bug inherited from pdksh 5.2.14 (AD 1999)
• deactivate %a and %A since our libc doesn’t have it
• rewrite the mksh integration code to use shf instead of stdio, removing
floating point support always in the process, as shf doesn’t support it
⇒ saves 11114 (6706 text, 168 data, 4240 bss) with dietlibc on Debian
• fix -Wall -Wextra -Wformat -Wstrict-aliasing=2 for gcc (Debian 4.4.4-7)
• fix these and -Wc++-compat for gcc version 4.6.0 20100711 (experimental)
[trunk revision 162057] (Debian 20100711-1) except:
– a few enum warnings that relate to eglibc’s {g,s}etrlimit() functions
taking an enum instead of an int because they’re too stupid to adhere
to POSIX interfaces they design by themselves
– all “request for implicit conversion” involving a "void *" on one side
• tweak the manual page somewhat more
• avoid calling realloc twice in sequence, since the final
size is known at the first call already
• do not lstat(2) the same path twice in the Hurd codepath
concurrently accessing the same $HISTFILE be more synchronised with
each other: empty lines (just pressing Return) and duplicates (that
are split and written twice by the lines loaded from $HISTFILE in
the meantime); requested by Maximilian “mxey” Gaß in #!/bin/mksh
some idiotic terminal emulators and/or people seem to use the es-
cape codes normally denoting Alt-Arrowkey instead so let's simply
bind them to the vt_hack as well... (untested)
• merge the rest of branch tg-wcswidth-behaviour
• enhance test cases for wcswidth-like behaviour
• switch hash table collision resolution algorithm to Python’s as announced
• bump vsn
│remember to restore errno (ie. stop someone from making a mistake later)
│ok guenther
check.t, sh.h: bump vsn
I wonder though why errno must be restored even if nothing was
called after reading it… moid?
which, in its latest sid incarnation, even received mksh's ability
to produce ${!foo[*]} array keys, wow!)
* plug a memory leak while here (ATEMP only, but still)
I read, IIRC in the Cederqvist, that 'cvs tag' sets a sticky tag onto
the cwd… it doesn’t, apparently. (I actually like it better this way,
but one needs to know!)
others (colon and equals sign need to be simply escaped, while dollar
sign and accent gravis need double escaping like opening square brak-
ket did back then); add = to C_QUOTE to simplify (doesn't break any-
thing) and sort these strings asciibetically while here
• use a combination of the one-at-a-time hash and an LCG for handling
the $RANDOM special if !HAVE_ARC4RANDOM instead of rand(3)/srand(3)
and get rid of time(3) usage to reduce import footprint
• raise entropy state (mostly in the !HAVE_ARC4RANDOM case though…)
• simplify handling of the $RANDOM_SPECIAL generally
• tweak hash() to save a temp var for non-optimising compilers
• some int → mksh_ari_t and other type fixes
• general tweaking of code and comments
just a "somewhat more POSIX" but also a "/bin/sh legacy kludge" mode
* consistently capitalise POSIX and SUSv3/SUSv4 (same as AT&T ksh) and
Bourne shell
to it are now either arc4random or rand/srand, but srand retains the old
state; set +o arc4random is no longer possible, but if it's there we use
arc4random(3), if not, we use rand(3) for $RANDOM reads; optimise special
variable handling too and fix a few consts and other minor things
MKSH_S_EDIT for small (Emacs) editing mode, MKSH_S_FEAT for all the dis-
abled language features), which can be set to 0 despite MKSH_SMALL being
defined to re-enable the Vi command line editing mode (which I wouldn't,
but fits into the general mastermind scheme)
some GNU bash extensions (suggested by cnuke@) and bind macros
* make the random cache more efficient (and the code potentially
smaller, although we have a new implementation of the oaat hash
function, alongside the old one, now) and pushb only if needed
(i.e. state has changed or user has set $RANDOM, but not onfork)
• shell flags are now handled in one single place (sh_flags.h)
• sync comments (between enum and array) and manpage with reality
• FMONITOR is now no longer needed for Hartz IV shells
integers in addition to my 「1#a」 (or 「1#…」), which also allows for
finer end-of-character checking. Note that this is locale-dependent in
ksh93, set ±U dependent in mksh, and mksh’s OPTU-16 encoding is used.
libc function realpath(3) which may not be available on the target
system; compile the realpath builtin unconditionally
looks fine to me, but review is appreciated; this is (very) lightly
based upon MirBSD libc’s realpath(3) and pdksh’s get_phys_path()
it with the array index; var.c says that
│ 1244 /* The table entry is always [0] */
so that we can have a special flag and a union which stores hval for
the table index, the array index otherwise (coïncidentally *hint hint*
they have the same size)
return information needed to do a real ktremove instead of the pseudo
ktdelete operation which merely unsets the DEFINED flag to mark it as
eligible for texpand garbage collection (even worse, !DEFINED entries
are still counted)
much better avalanche and no known funnels
• improve comments
• fix some types (uint32_t for hash, size_t for sizes)
• optimise ktsort()
no functional change, I think
Build.sh but use 'if defined(PRECOND) && !defined(TOBEDEFINED)'if possible
* for all of the source code, drop annotations "imake style" (if we check
for specific OSes, bad, instead of using mirtoconf checks proper) and
"conditions correct?" (if I'm not entirely sure if that #if catches all
cases and no false positives) where I can see it by grepping immediately
* bump mksh patchlevel
* refresh Makefiles
more from cid 1004A2D72DD5A4E4B4F tried to be fixed in 1004A300A72701188E3
but I’d appreciate someone who actually uses Vi Mode to test it:
Revision 1.26: [7]download - view: [8]text, [9]markup, [10]annotated - [11]select for diffs
Mon Jun 29 22:50:19 2009 UTC (5 days, 14 hours ago) by martynas
Branches: [12]MAIN
CVS tags: [13]OPENBSD_4_6_BASE, [14]OPENBSD_4_6, [15]HEAD
Diff to: previous 1.25: [16]preferred, [17]coloured
Changes since revision 1.25: +10 -5 lines
make VSEARCH werase act like regular werase after the last change.
vi back-words and emacs kill-region are not completely the same.
ok merdely@, millert@. "Get it in" Darrin Chandler
starting with an ‘!’ exclamation mark at the beginning of a com-
mand (PS1 not PS2), shall have the same effect as the predefined
“r” alias, to be compatible with csh and GNU bash’s “!string” to
«Execute last used command starting with string» – documentation
and feature request provided by wbx@ (Waldemar Brodkorb)
and it actually REDUCES code size to allow it as well; mention
in the manpage that it’s merely unportable (and of course exe-
cution time differs); sync clog
• expose “#ifdef MKSH_MIDNIGHTBSD01ASH_COMPAT” just in case they decide to
require it and show it in the ksh version automatically
• sync the use of non-ASCII characters over files (unification)
fix the regression test’s results while here, which have been
broken since cid 10049D9BE5254CE65B8
• get rid of separate copyright file which was intended for De-
bian; track down commits in all files of oksh-mirbsd and mksh
to get correct copyright years per-file, as is BSD custom
${foo:1:2} operates on characters ipv bytes – which means:
‣ set +U: octets
‣ set -U: MirOS OPTU-8 characters
for consistency I also adapted ${#stringname} to deliver the
length in characters ipv bytes; more may follow; for example
I’d like a way to expose the string width.
you can already get the MirOS OPTU-16 of a character in the
WTF-8 (「set -U」) mode with something like
│ typeset -Uui16 -Z7 x=1#${stringname:position:1}
which will correctly use the PUA EF80‥EFFF mapping for octets.
due to this being an incompatible change, bump to R38
also change the unicode-hexdump sample regression test and
add two news for ${x:1:2} and ${#x} checks in A/W mode ☺
struct env (other structures defined have no "foreign type with pos-
sible alignment constraints" members) and take care of it while dea-
ling in a struct env instance
gcc, SUNWcc, pcc, llvm-gcc, clang, etc. all didn't say a thing!
now compiles warning-free (testsuite pass) on ULTRIX 4.5 (1986),
and OSF/1 X2.0-8 (testsuite norun: perl missing) has only the usual
bitchings about "volatile sig_atomic_t" because the latter part is
already volatile, but otherwise warning-free compile, works fine
pass "xerrok" status across the execution call stack to more closely
match what both POSIX and [18]ksh.1 already describe in regards to set
-e/errexit's behavior in determining when to exit from nonzero return
values.
specifically, the truth values tested as operands to &&' and ||', as
well as the resulting compound expression itself, along with the truth
value resulting from a negated command (i.e. a pipeline prefixed !'),
should not make the shell exit when -e is in effect.
issue reported by matthieu.
testing matthieu, naddy.
ok miod (earlier version), otto.
man page ok jmc.
similarily simple one from scratch, which however performs
better than espie's with AFREE_DEBUG enabled which took away
the benefit of the double-linked-list approach
all of (core) mksh is now MirOS licenced
H4sIAAAAAAACA31TTUvDQBC951c804DtIQ0iiFhSPHiwiCDqzUpIuhO6JN2ETSS16n93Np+GFiGE
zM6bN2/fTPQOro5xENYuEVLzBz9eaF6RlWupSpyHaXqzVuvyljbbDCRV0UR7WeLiHEtT4D2GCcUy
pdNFh4pkg4wGZCV8Z6opTPOw3GI+swoq4ZIVZxqkSv0JqRAiWkBkmAJNegHIGG9vcAWcSnjM6dTo
uby8vsL7+wLllhQQKKr4SoFv/8nbXE5pQcdpk4nlwH6AE7zer17uVs/BmHVftnUdxYh0yHbV3ghY
9wh2rQlBkdMm8PmIe57Bjfs7dTW9X/OoEG6lwzwnzYKA7+8jHpsJTuFN4+IjKhKZM6dpZ0xuQ2Nz
7bGB1F74zlebmzTm/PS+OB0GZz4HLcPgz+BeDxyS9S7YU6e3qZaQk5gZgRHvQtI59Eet7QwBWFnL
O/F+ej9Fpmg0ug7OHrnqHy2+7y8x6DGEG3E0Az41RuPlYfXEEx0psrl8PAUebzf6ZklabgD8V3SS
Z7Vo6xfOuQS6gQMAAA==
「mksh -o posix z」 failed in that it continues; 「mksh z」 correctly aborts
let’s see what the obsd people have to say herefore
H4sIAAAAAAACAz1PywrDIBA8m68YgoT20EN7TMixX1F6yGNFIWhRSw2h/95VmuDB2XmsY2oDRVyo
Si1N2uHlMzQK0b8JHaImy4RQwxIITYPiUs4xqcyeGgdfrfumtWX5dMbGSHy0WQgP1PJa49lhdpkV
ynncYSxkOjjxd/V83dmcX9sQtFGRi0zORmO5042HbwnMzlIBqa9lAmfLVBIZ7XqpKBPDnDu+WXpi
wMhnOgQXYvUD+oKHAhUBAAA=
XXX OpenBSD has something different which may DTST or even DTRT (not break
XXX our make(1) wrt <bsd.subdir.mk>), check that
on Debian Lenny/amd64 (XXX need more verification; this
can be used for 64 bit arithmetics later too)
PPID, PGRP, RANDOM, USER_ID are now unsigned by default
on the screen is not enough for two columns, just output the text line by
line, instead of trying to format it; gets rid of superfluous empty lines
if we did not even have space for one column on the screen (x_cols)
noticed by Gábor Gergely in irc, thanks!
tg