I read, IIRC in the Cederqvist, that 'cvs tag' sets a sticky tag onto
the cwd… it doesn’t, apparently. (I actually like it better this way,
but one needs to know!)
just a "somewhat more POSIX" but also a "/bin/sh legacy kludge" mode
* consistently capitalise POSIX and SUSv3/SUSv4 (same as AT&T ksh) and
Bourne shell
• shell flags are now handled in one single place (sh_flags.h)
• sync comments (between enum and array) and manpage with reality
• FMONITOR is now no longer needed for Hartz IV shells
return information needed to do a real ktremove instead of the pseudo
ktdelete operation which merely unsets the DEFINED flag to mark it as
eligible for texpand garbage collection (even worse, !DEFINED entries
are still counted)
much better avalanche and no known funnels
• improve comments
• fix some types (uint32_t for hash, size_t for sizes)
• optimise ktsort()
no functional change, I think
• expose “#ifdef MKSH_MIDNIGHTBSD01ASH_COMPAT” just in case they decide to
require it and show it in the ksh version automatically
• sync the use of non-ASCII characters over files (unification)
fix the regression test’s results while here, which have been
broken since cid 10049D9BE5254CE65B8
• get rid of separate copyright file which was intended for De-
bian; track down commits in all files of oksh-mirbsd and mksh
to get correct copyright years per-file, as is BSD custom
pass "xerrok" status across the execution call stack to more closely
match what both POSIX and [18]ksh.1 already describe in regards to set
-e/errexit's behavior in determining when to exit from nonzero return
values.
specifically, the truth values tested as operands to &&' and ||', as
well as the resulting compound expression itself, along with the truth
value resulting from a negated command (i.e. a pipeline prefixed !'),
should not make the shell exit when -e is in effect.
issue reported by matthieu.
testing matthieu, naddy.
ok miod (earlier version), otto.
man page ok jmc.
H4sIAAAAAAACA31TTUvDQBC951c804DtIQ0iiFhSPHiwiCDqzUpIuhO6JN2ETSS16n93Np+GFiGE
zM6bN2/fTPQOro5xENYuEVLzBz9eaF6RlWupSpyHaXqzVuvyljbbDCRV0UR7WeLiHEtT4D2GCcUy
pdNFh4pkg4wGZCV8Z6opTPOw3GI+swoq4ZIVZxqkSv0JqRAiWkBkmAJNegHIGG9vcAWcSnjM6dTo
uby8vsL7+wLllhQQKKr4SoFv/8nbXE5pQcdpk4nlwH6AE7zer17uVs/BmHVftnUdxYh0yHbV3ghY
9wh2rQlBkdMm8PmIe57Bjfs7dTW9X/OoEG6lwzwnzYKA7+8jHpsJTuFN4+IjKhKZM6dpZ0xuQ2Nz
7bGB1F74zlebmzTm/PS+OB0GZz4HLcPgz+BeDxyS9S7YU6e3qZaQk5gZgRHvQtI59Eet7QwBWFnL
O/F+ej9Fpmg0ug7OHrnqHy2+7y8x6DGEG3E0Az41RuPlYfXEEx0psrl8PAUebzf6ZklabgD8V3SS
Z7Vo6xfOuQS6gQMAAA==
「mksh -o posix z」 failed in that it continues; 「mksh z」 correctly aborts
let’s see what the obsd people have to say herefore
H4sIAAAAAAACAz1PywrDIBA8m68YgoT20EN7TMixX1F6yGNFIWhRSw2h/95VmuDB2XmsY2oDRVyo
Si1N2uHlMzQK0b8JHaImy4RQwxIITYPiUs4xqcyeGgdfrfumtWX5dMbGSHy0WQgP1PJa49lhdpkV
ynncYSxkOjjxd/V83dmcX9sQtFGRi0zORmO5042HbwnMzlIBqa9lAmfLVBIZ7XqpKBPDnDu+WXpi
wMhnOgQXYvUD+oKHAhUBAAA=
XXX OpenBSD has something different which may DTST or even DTRT (not break
XXX our make(1) wrt <bsd.subdir.mk>), check that
was hard to type and hard to fix, galloc is also hard to fix, and some
things I learned will probably improve things more but make me use the
original form as base (especially for space savings)
* let sizeofN die though, remove even more casts
* optimise, polish
* regen Makefiles
* sprinkle a few /* CONSTCOND */ while here
‣ macro afreechk() is superfluous
• get rid of macro afreechv() by re-doing the “don’t leak that much” code
• some KNF (mostly, whitespace and 80c) while here
• more int → bool
• more regression tests: check if the utf8-hack flag is really disabled
at non-interactive startup, enabled at interactive startup, if the
current locale is a UTF-8 one
• make the mksh-local multibyte handling functions globally accessible,
change their names, syntax and semantics a little (XXX more work needed)
• optimise
• utf_wctomb: src → dst, as we’re writing to that char array (pasto?)
• edit.c:x_e_getmbc(): if the second byte of a 2- or 3-byte multibyte
sequence is invalid utf-8, ungetc it (not possible for the 3rd byte yet)
• edit.c:x_zotc3(): easier (and faster) handling of UTF-8
• implement, document and test for base-1 numbers: they just get the
ASCII (8-bit) or Unicode (UTF-8) value of the octet(s) after the ‘1#’,
or do the same as print \x## or \u#### (depending on the utf8-hack flag),
plus support the PUA assignment of EF80‥EFFF for the MirBSD encoding “hack”
(print doesn’t, as it has \x## and \u#### to distinguish, but we cannot use
base-0 numbers which I had planned to use for raw octets first, as they are
used internally): http://thread.gmane.org/gmane.os.miros.general/7938
• as an application example, add a hexdumper to the regression tests ☺
• apply diff from mirbsdksh-1.11:
#ifdef DUP2_BROKEN
/* Ultrix systems like to preserve the close-on-exec flag */
‣ XXX we do #ifdef __ultrix here (imake-style) instead of mirtoconfing it
(but does anyone know of any other OS with the same problem? plus we’d
see it as we now know the symptoms)
• remove ultrix Build.hs warn=' but might work…' in the hope it DOES
from netbsd via oksh
we had the NULL pointer deref already fixed
• avoid a bogus not-setting the return value of edit.c:x_file_glob()
introduced by the above change in oksh
• escape ? as well (but not ] because that’s wrong)
reminded by cbiere@netbsd via oksh
• Unsetting a non-existent variable is not an error. See
http://www.opengroup.org/onlinepubs/009695399/utilities/unset.html
report from Arkadiusz Miskiewicz; fixed based on
http://cvs.pld-linux.org diff via oksh but modified slightly
• Be more smart waiting for input for non-interactive scripts. Fix
based on a diff from debian: see their bug#296446 (via oksh)
modified slightly
this also fixes cnuke@’s “mksh busy loop” problem, for which I never
received a bug report, but the Debian bug page contains a set of two
scripts to reproduce this before (and no longer after) this commit
• some KNF
• bump version
delivered to the process
• regression test by Clint Pachl, verified against Debian ksh93 by me
• place to fix it in the code discovered by Otto Moerbeek
Analysis:
internal_errorf(int, fmt, ...) was only a __dead function if the int argument
was non-0, which the Prevent probably was unable to follow. Change all uses of
internal_errorf(0, fmt, ...) to internal_warningf(fmt, ...); change the pro-
totype of internal_errorf() to internal_errorf(fmt, ...) and all remaining
uses remove the non-0 int argument; add __dead to internal_errorf() proto;
flesh out guts of internal_errorf() and internal_warningf() into a new local
function for optimisation purposes.
Some whitespace cleanup and dead code removal (return after internal_errorf(1))
helps to at least not get messages like
| sysop@odem2k:~/mb $ ./foo.sh
| : No such file or directory
| 127|sysop@odem2k:~/mb $ _
if you forgot to convert CR-LF into LF (of course only if the
kernel fails with ENOEXEC – an ENOENT would not help in these
cases), but of course other things will fail
do not start with a "#!shell" sequence” part of mksh(1) true again; this
was probably lost in mksh R21 or so when I decided/saw that our kernel
always parses shebang lines (code written myself, not taken from pdksh
again or MirBSD kernel, but verified against both)
• bom+shebang execution now works, no need setting EXECSHELL in the test
• bump version
and have it return an API-correct const char *
• enhance and stylify comments
• a little KNF and simplifications
• #ifdef DEBUG: replace strchr and strstr with ucstrchr and ucstrstr
that take and return a non-const char *, and fix the violations
• new cstrchr, cstrstr (take and give const char *)
• new vstrchr, vstrstr (take const or not, give boolean value)
• new afreechk(x) = afreechv(x,x) = if (x1) afree(x2, ATEMP)
• new ksh_isdash(str) = (str != NULL) && !strcmp(str, "-")
• replace the only use of strrchr with inlined code to shrink
• minor man page fixes
• Minix 3 signames are autogenerated with gcc
• rename strlfun.c to strlcpy.c since we don't do strlcat(3) anyway,
only strlcpy(3), and shorten it
• dot.mkshrc: move MKSH=… down to the export line
to not disturb the PS1 visual impression ☺
• dot.mkshrc: Lstripcom(): optimise
• bump version
¹) side effect from creating API-correct cstrchr, cstrstr, etc.
uses goto so it must be better ☻
tested on mirbsd-current via both Makefile and Build.sh
tg