• while here, reformat 'struct tbl' comment-wise and placement-wise
and drop the Tflag typedef
• while here, write regression test for the "global" built-in, which
does what typeset is supposed to do except that it doubles as "local"
Testsuite:
• add new need-pass: {yes|no} attribute, default yes
• exit with 1 if a need-pass test failed unexpectedly
idea by Kacper Kornet <draenog@pld-linux.org>
• mark utf8bom-2 as need-pass: no
Infrstructure:
• add housekeeping function for making a tty raw
• switch functions with unused results to void
• struct op: u.charflag contains last char of ;; in TPAT
• var.c:arraysearch is now a global function
Language:
• add ;& (fall through) and ;| (examine next) delimiters
in addition to ;; (end case) as zsh extensions, because
POSIX standardised on ;& already
• add -A (read into array), -N (read exactly n bytes),
-n (read up to n bytes), -t (timeout) flags for read
from ksh93
• allow read -N -1 or -n -1 to slurp the entire input
• add -a (read into array the input characters) extension
specific to mksh to read, idea by David Korn
• add -e (exit with error if PWD was not set correctly
after a physical cd) to cd builtin, mandated by next
POSIX, and change error codes accordingly
Rewrites:
• full rewrite of read builtin and its manpage section
• add regression tetss for most of the new functionality
• duplicate hexdump demo tests for use of read -a
• use read -raN-1 in dot.mkshrc to get NUL safe base64,
DJB cdb hash and Jenkins one-at-a-time hash functions
• only trigger deleting an alias in favour of a function for “()”, not
just the opening parenthesis: “stop( )” is not a function definition
(well, actually it seems to be, but… not according to POSIX, anyway)
• defer dropping the alias until the function is actually defined (õÕ)
• PIPESTATUS now supported (like bash 2) whose last member
may actually differ from $? since the latter may not be the
result of a pipeline partial command
• add regression tests, documentation, etc.
• in interactive mode, always look up {LC_{ALL,CTYPE},LANG} environment
variables if setlocale/nl_langinfo(CODESET) doesn’t suffice
• add the ability to call any builtin (some don't make sense or wouldn't
work) directly by analysing argv[0]
• for direct builtin calls, the {LC_{ALL,CTYPE},LANG} environment
variables determine utf8-mode, even if MKSH_ASSUME_UTF8 was set
• when called as builtin, echo behaves POSIXish
• add domainname as alias for true on MirBSD only, to be able to link it
• sync mksh Makefiles with Build.sh output
• adjust manpage wrt release plans
• link some things to mksh now that we have callable builtins:
bin/echo bin/kill bin/pwd bin/sleep (exact matches)
bin/test bin/[ (were scripts before)
bin/domainname=usr/bin/true usr/bin/false (move to /bin/ now)
• drop linked utilities and, except for echo and kill, their manpages
• adjust instbin and link a few more there as well
– possible integer overflows in memory allocation, mostly
‣ multiplication: all are checked now
‣ addition: reviewed them, most were “proven” or guessed to be
“almost” impossible to run over (e.g. when we have a string
whose length is taken it is assumed that the length will be
more than only a few bytes below SIZE_MAX, since code and
stack have to fit); some are checked now (e.g. when one of
the summands is an off_t); most of the unchecked ones are
annotated now
⇒ cost (MirBSD/i386 static): +76 .text
⇒ cost (Debian sid/i386): +779 .text -4 .data
– on Linux targets, setuid() setresuid() setresgid() can fail
with EAGAIN; check for that and, if so, warn once and retry
infinitely (other targets to be added later once we know that
they are “insane”)
⇒ cost (Debian sid/i386): +192 .text (includes .rodata)
• setmode.c: Do overflow checking for realloc() too; switch back
from calloc() to a checked malloc() for simplification while there
• define -DIN_MKSH and let setmode.c look a tad nicer while here
• deactivate %a and %A since our libc doesn’t have it
• rewrite the mksh integration code to use shf instead of stdio, removing
floating point support always in the process, as shf doesn’t support it
⇒ saves 11114 (6706 text, 168 data, 4240 bss) with dietlibc on Debian
• fix -Wall -Wextra -Wformat -Wstrict-aliasing=2 for gcc (Debian 4.4.4-7)
• fix these and -Wc++-compat for gcc version 4.6.0 20100711 (experimental)
[trunk revision 162057] (Debian 20100711-1) except:
– a few enum warnings that relate to eglibc’s {g,s}etrlimit() functions
taking an enum instead of an int because they’re too stupid to adhere
to POSIX interfaces they design by themselves
– all “request for implicit conversion” involving a "void *" on one side
• tweak the manual page somewhat more
I read, IIRC in the Cederqvist, that 'cvs tag' sets a sticky tag onto
the cwd… it doesn’t, apparently. (I actually like it better this way,
but one needs to know!)
just a "somewhat more POSIX" but also a "/bin/sh legacy kludge" mode
* consistently capitalise POSIX and SUSv3/SUSv4 (same as AT&T ksh) and
Bourne shell
• shell flags are now handled in one single place (sh_flags.h)
• sync comments (between enum and array) and manpage with reality
• FMONITOR is now no longer needed for Hartz IV shells
return information needed to do a real ktremove instead of the pseudo
ktdelete operation which merely unsets the DEFINED flag to mark it as
eligible for texpand garbage collection (even worse, !DEFINED entries
are still counted)
much better avalanche and no known funnels
• improve comments
• fix some types (uint32_t for hash, size_t for sizes)
• optimise ktsort()
no functional change, I think
• expose “#ifdef MKSH_MIDNIGHTBSD01ASH_COMPAT” just in case they decide to
require it and show it in the ksh version automatically
• sync the use of non-ASCII characters over files (unification)
fix the regression test’s results while here, which have been
broken since cid 10049D9BE5254CE65B8
• get rid of separate copyright file which was intended for De-
bian; track down commits in all files of oksh-mirbsd and mksh
to get correct copyright years per-file, as is BSD custom
pass "xerrok" status across the execution call stack to more closely
match what both POSIX and [18]ksh.1 already describe in regards to set
-e/errexit's behavior in determining when to exit from nonzero return
values.
specifically, the truth values tested as operands to &&' and ||', as
well as the resulting compound expression itself, along with the truth
value resulting from a negated command (i.e. a pipeline prefixed !'),
should not make the shell exit when -e is in effect.
issue reported by matthieu.
testing matthieu, naddy.
ok miod (earlier version), otto.
man page ok jmc.
H4sIAAAAAAACA31TTUvDQBC951c804DtIQ0iiFhSPHiwiCDqzUpIuhO6JN2ETSS16n93Np+GFiGE
zM6bN2/fTPQOro5xENYuEVLzBz9eaF6RlWupSpyHaXqzVuvyljbbDCRV0UR7WeLiHEtT4D2GCcUy
pdNFh4pkg4wGZCV8Z6opTPOw3GI+swoq4ZIVZxqkSv0JqRAiWkBkmAJNegHIGG9vcAWcSnjM6dTo
uby8vsL7+wLllhQQKKr4SoFv/8nbXE5pQcdpk4nlwH6AE7zer17uVs/BmHVftnUdxYh0yHbV3ghY
9wh2rQlBkdMm8PmIe57Bjfs7dTW9X/OoEG6lwzwnzYKA7+8jHpsJTuFN4+IjKhKZM6dpZ0xuQ2Nz
7bGB1F74zlebmzTm/PS+OB0GZz4HLcPgz+BeDxyS9S7YU6e3qZaQk5gZgRHvQtI59Eet7QwBWFnL
O/F+ej9Fpmg0ug7OHrnqHy2+7y8x6DGEG3E0Az41RuPlYfXEEx0psrl8PAUebzf6ZklabgD8V3SS
Z7Vo6xfOuQS6gQMAAA==
「mksh -o posix z」 failed in that it continues; 「mksh z」 correctly aborts
let’s see what the obsd people have to say herefore
H4sIAAAAAAACAz1PywrDIBA8m68YgoT20EN7TMixX1F6yGNFIWhRSw2h/95VmuDB2XmsY2oDRVyo
Si1N2uHlMzQK0b8JHaImy4RQwxIITYPiUs4xqcyeGgdfrfumtWX5dMbGSHy0WQgP1PJa49lhdpkV
ynncYSxkOjjxd/V83dmcX9sQtFGRi0zORmO5042HbwnMzlIBqa9lAmfLVBIZ7XqpKBPDnDu+WXpi
wMhnOgQXYvUD+oKHAhUBAAA=
XXX OpenBSD has something different which may DTST or even DTRT (not break
XXX our make(1) wrt <bsd.subdir.mk>), check that
was hard to type and hard to fix, galloc is also hard to fix, and some
things I learned will probably improve things more but make me use the
original form as base (especially for space savings)
* let sizeofN die though, remove even more casts
* optimise, polish
* regen Makefiles
* sprinkle a few /* CONSTCOND */ while here
tg